-// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE
+// Copyright (C) 2007-2011 CEA/DEN, EDF R&D, OPEN CASCADE
//
-// Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
-// CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
+// Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
+// CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
//
-// This library is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License.
+// This library is free software; you can redistribute it and/or
+// modify it under the terms of the GNU Lesser General Public
+// License as published by the Free Software Foundation; either
+// version 2.1 of the License.
//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
+// This library is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+// Lesser General Public License for more details.
//
-// You should have received a copy of the GNU Lesser General Public
-// License along with this library; if not, write to the Free Software
-// Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+// You should have received a copy of the GNU Lesser General Public
+// License along with this library; if not, write to the Free Software
+// Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
//
-// See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
+// See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
//
-// GEOM GEOMGUI : GUI for Geometry component
// File : GeometryGUI.cxx
// Author : Vadim SANDLER, Open CASCADE S.A.S. (vadim.sandler@opencascade.com)
#include <Standard_math.hxx> // E.A. must be included before Python.h to fix compilation on windows
+#ifdef HAVE_FINITE
+#undef HAVE_FINITE // VSR: avoid compilation warning on Linux : "HAVE_FINITE" redefined
+#endif
#include "Python.h"
#include "GeometryGUI.h"
#include "GeometryGUI_Operations.h"
#include "GEOMGUI_OCCSelector.h"
#include "GEOMGUI_Selection.h"
+#include "GEOM_Constants.h"
#include "GEOM_Displayer.h"
#include "GEOM_AISShape.hxx"
#include "GEOM_Actor.h"
+#include <Material_ResourceMgr.h>
+
#include <SUIT_Desktop.h>
#include <SUIT_MessageBox.h>
#include <SUIT_ResourceMgr.h>
#include <SALOMEDSClient_ClientFactory.hxx>
#include <SALOMEDSClient_IParameters.hxx>
+#include <Basics_OCCTVersion.hxx>
+
// External includes
#include <QMenu>
+#include <QTime>
#include <QAction>
#include <QFileInfo>
#include <QString>
#include <Aspect_TypeOfMarker.hxx>
#include <OSD_SharedLibrary.hxx>
#include <NCollection_DataMap.hxx>
+
+#if OCC_VERSION_LARGE > 0x06040000 // Porting to OCCT6.5.1
+#include <TColStd_HArray1OfByte.hxx>
+#else
#include <Graphic3d_HArray1OfBytes.hxx>
+#endif
#include <utilities.h>
#include <vtkCamera.h>
#include <vtkRenderer.h>
+#include <GEOM_version.h>
+
+
#include "GEOMImpl_Types.hxx"
extern "C" {
Standard_EXPORT CAM_Module* createModule() {
return new GeometryGUI();
}
+
+ Standard_EXPORT char* getModuleVersion() {
+ return (char*)GEOM_VERSION_STR;
+ }
}
GeometryGUI::StudyTextureMap GeometryGUI::myTextureMap;
view3d->SetProj(DZ.X(), DZ.Y(), DZ.Z());
view3d->SetUp(DY.X(), DY.Y(), DY.Z());
-
- vw->onViewFitAll();
+ vw->onViewFitAll();
}
}
else if( ViewVTK ) {
QString libName;
// find corresponding GUI library
switch ( id ) {
- case GEOMOp::OpOriginAndVectors: // MENU BASIC - ORIGIN AND BASE VECTORS
+ case GEOMOp::OpOriginAndVectors: // MENU BASIC - ORIGIN AND BASE VECTORS
createOriginAndBaseVectors(); // internal operation
return;
- case GEOMOp::OpImport: // MENU FILE - IMPORT
- case GEOMOp::OpExport: // MENU FILE - EXPORT
- case GEOMOp::OpSelectVertex: // POPUP MENU - SELECT ONLY - VERTEX
- case GEOMOp::OpSelectEdge: // POPUP MENU - SELECT ONLY - EDGE
- case GEOMOp::OpSelectWire: // POPUP MENU - SELECT ONLY - WIRE
- case GEOMOp::OpSelectFace: // POPUP MENU - SELECT ONLY - FACE
- case GEOMOp::OpSelectShell: // POPUP MENU - SELECT ONLY - SHELL
- case GEOMOp::OpSelectSolid: // POPUP MENU - SELECT ONLY - SOLID
- case GEOMOp::OpSelectCompound: // POPUP MENU - SELECT ONLY - COMPOUND
- case GEOMOp::OpSelectAll: // POPUP MENU - SELECT ONLY - SELECT ALL
- case GEOMOp::OpDelete: // MENU EDIT - DELETE
- case GEOMOp::OpCheckGeom: // MENU TOOLS - CHECK GEOMETRY
- case GEOMOp::OpDeflection: // POPUP MENU - DEFLECTION COEFFICIENT
- case GEOMOp::OpColor: // POPUP MENU - COLOR
- case GEOMOp::OpTransparency: // POPUP MENU - TRANSPARENCY
- case GEOMOp::OpIncrTransparency: // SHORTCUT - INCREASE TRANSPARENCY
- case GEOMOp::OpDecrTransparency: // SHORTCUT - DECREASE TRANSPARENCY
- case GEOMOp::OpIsos: // POPUP MENU - ISOS
- case GEOMOp::OpIncrNbIsos: // SHORTCUT - INCREASE NB ISOS
- case GEOMOp::OpDecrNbIsos: // SHORTCUT - DECREASE NB ISOS
- case GEOMOp::OpAutoColor: // POPUP MENU - AUTO COLOR
- case GEOMOp::OpNoAutoColor: // POPUP MENU - DISABLE AUTO COLOR
- case GEOMOp::OpShowChildren: // POPUP MENU - SHOW CHILDREN
- case GEOMOp::OpHideChildren: // POPUP MENU - HIDE CHILDREN
- case GEOMOp::OpUnpublishObject: // POPUP MENU - UNPUBLISH
- case GEOMOp::OpPublishObject: // ROOT GEOM OBJECT - POPUP MENU - PUBLISH
- case GEOMOp::OpPointMarker: // POPUP MENU - POINT MARKER
+ case GEOMOp::OpImport: // MENU FILE - IMPORT
+ case GEOMOp::OpExport: // MENU FILE - EXPORT
+ case GEOMOp::OpSelectVertex: // POPUP MENU - SELECT ONLY - VERTEX
+ case GEOMOp::OpSelectEdge: // POPUP MENU - SELECT ONLY - EDGE
+ case GEOMOp::OpSelectWire: // POPUP MENU - SELECT ONLY - WIRE
+ case GEOMOp::OpSelectFace: // POPUP MENU - SELECT ONLY - FACE
+ case GEOMOp::OpSelectShell: // POPUP MENU - SELECT ONLY - SHELL
+ case GEOMOp::OpSelectSolid: // POPUP MENU - SELECT ONLY - SOLID
+ case GEOMOp::OpSelectCompound: // POPUP MENU - SELECT ONLY - COMPOUND
+ case GEOMOp::OpSelectAll: // POPUP MENU - SELECT ONLY - SELECT ALL
+ case GEOMOp::OpDelete: // MENU EDIT - DELETE
+ case GEOMOp::OpCheckGeom: // MENU TOOLS - CHECK GEOMETRY
+ case GEOMOp::OpDeflection: // POPUP MENU - DEFLECTION COEFFICIENT
+ case GEOMOp::OpColor: // POPUP MENU - COLOR
+ case GEOMOp::OpSetTexture: // POPUP MENU - SETTEXTURE
+ case GEOMOp::OpTransparency: // POPUP MENU - TRANSPARENCY
+ case GEOMOp::OpIncrTransparency: // SHORTCUT - INCREASE TRANSPARENCY
+ case GEOMOp::OpDecrTransparency: // SHORTCUT - DECREASE TRANSPARENCY
+ case GEOMOp::OpIsos: // POPUP MENU - ISOS
+ case GEOMOp::OpIncrNbIsos: // SHORTCUT - INCREASE NB ISOS
+ case GEOMOp::OpDecrNbIsos: // SHORTCUT - DECREASE NB ISOS
+ case GEOMOp::OpAutoColor: // POPUP MENU - AUTO COLOR
+ case GEOMOp::OpNoAutoColor: // POPUP MENU - DISABLE AUTO COLOR
+ case GEOMOp::OpShowChildren: // POPUP MENU - SHOW CHILDREN
+ case GEOMOp::OpHideChildren: // POPUP MENU - HIDE CHILDREN
+ case GEOMOp::OpUnpublishObject: // POPUP MENU - UNPUBLISH
+ case GEOMOp::OpPublishObject: // ROOT GEOM OBJECT - POPUP MENU - PUBLISH
+ case GEOMOp::OpPointMarker: // POPUP MENU - POINT MARKER
+ case GEOMOp::OpMaterialProperties: // POPUP MENU - MATERIAL PROPERTIES
+ case GEOMOp::OpEdgeWidth: // POPUP MENU - LINE WIDTH - EDGE WIDTH
+ case GEOMOp::OpIsosWidth: // POPUP MENU - LINE WIDTH - ISOS WIDTH
libName = "GEOMToolsGUI";
break;
- case GEOMOp::OpDisplayMode: // MENU VIEW - WIREFRAME/SHADING
- case GEOMOp::OpShowAll: // MENU VIEW - SHOW ALL
- case GEOMOp::OpShowOnly: // MENU VIEW - DISPLAY ONLY
- case GEOMOp::OpHideAll: // MENU VIEW - ERASE ALL
- case GEOMOp::OpHide: // MENU VIEW - ERASE
- case GEOMOp::OpShow: // MENU VIEW - DISPLAY
- case GEOMOp::OpSwitchVectors: // MENU VIEW - VECTOR MODE
- case GEOMOp::OpWireframe: // POPUP MENU - WIREFRAME
- case GEOMOp::OpShading: // POPUP MENU - SHADING
- case GEOMOp::OpVectors: // POPUP MENU - VECTORS
+ case GEOMOp::OpDisplayMode: // MENU VIEW - WIREFRAME/SHADING
+ case GEOMOp::OpShowAll: // MENU VIEW - SHOW ALL
+ case GEOMOp::OpShowOnly: // MENU VIEW - DISPLAY ONLY
+ case GEOMOp::OpHideAll: // MENU VIEW - ERASE ALL
+ case GEOMOp::OpHide: // MENU VIEW - ERASE
+ case GEOMOp::OpShow: // MENU VIEW - DISPLAY
+ case GEOMOp::OpSwitchVectors: // MENU VIEW - VECTOR MODE
+ case GEOMOp::OpWireframe: // POPUP MENU - WIREFRAME
+ case GEOMOp::OpShading: // POPUP MENU - SHADING
+ case GEOMOp::OpShadingWithEdges: // POPUP MENU - SHADING WITH EDGES
+ case GEOMOp::OpTexture: // POPUP MENU - TEXTURE
+ case GEOMOp::OpVectors: // POPUP MENU - VECTORS
libName = "DisplayGUI";
break;
- case GEOMOp::OpPoint: // MENU BASIC - POINT
- case GEOMOp::OpLine: // MENU BASIC - LINE
- case GEOMOp::OpCircle: // MENU BASIC - CIRCLE
- case GEOMOp::OpEllipse: // MENU BASIC - ELLIPSE
- case GEOMOp::OpArc: // MENU BASIC - ARC
- case GEOMOp::OpVector: // MENU BASIC - VECTOR
- case GEOMOp::OpPlane: // MENU BASIC - PLANE
- case GEOMOp::OpCurve: // MENU BASIC - CURVE
- case GEOMOp::OpLCS: // MENU BASIC - LOCAL COORDINATE SYSTEM
+ case GEOMOp::OpPoint: // MENU BASIC - POINT
+ case GEOMOp::OpLine: // MENU BASIC - LINE
+ case GEOMOp::OpCircle: // MENU BASIC - CIRCLE
+ case GEOMOp::OpEllipse: // MENU BASIC - ELLIPSE
+ case GEOMOp::OpArc: // MENU BASIC - ARC
+ case GEOMOp::OpVector: // MENU BASIC - VECTOR
+ case GEOMOp::OpPlane: // MENU BASIC - PLANE
+ case GEOMOp::OpCurve: // MENU BASIC - CURVE
+ case GEOMOp::OpLCS: // MENU BASIC - LOCAL COORDINATE SYSTEM
libName = "BasicGUI";
break;
- case GEOMOp::OpBox: // MENU PRIMITIVE - BOX
- case GEOMOp::OpCylinder: // MENU PRIMITIVE - CYLINDER
- case GEOMOp::OpSphere: // MENU PRIMITIVE - SPHERE
- case GEOMOp::OpTorus: // MENU PRIMITIVE - TORUS
- case GEOMOp::OpCone: // MENU PRIMITIVE - CONE
- case GEOMOp::OpRectangle: // MENU PRIMITIVE - FACE
- case GEOMOp::OpDisk: // MENU PRIMITIVE - DISK
+ case GEOMOp::OpBox: // MENU PRIMITIVE - BOX
+ case GEOMOp::OpCylinder: // MENU PRIMITIVE - CYLINDER
+ case GEOMOp::OpSphere: // MENU PRIMITIVE - SPHERE
+ case GEOMOp::OpTorus: // MENU PRIMITIVE - TORUS
+ case GEOMOp::OpCone: // MENU PRIMITIVE - CONE
+ case GEOMOp::OpRectangle: // MENU PRIMITIVE - FACE
+ case GEOMOp::OpDisk: // MENU PRIMITIVE - DISK
libName = "PrimitiveGUI";
break;
- case GEOMOp::OpPrism: // MENU GENERATION - PRISM
- case GEOMOp::OpRevolution: // MENU GENERATION - REVOLUTION
- case GEOMOp::OpFilling: // MENU GENERATION - FILLING
- case GEOMOp::OpPipe: // MENU GENERATION - PIPE
+ case GEOMOp::OpPrism: // MENU GENERATION - PRISM
+ case GEOMOp::OpRevolution: // MENU GENERATION - REVOLUTION
+ case GEOMOp::OpFilling: // MENU GENERATION - FILLING
+ case GEOMOp::OpPipe: // MENU GENERATION - PIPE
libName = "GenerationGUI";
break;
- case GEOMOp::Op2dSketcher: // MENU ENTITY - SKETCHER
- case GEOMOp::Op3dSketcher: // MENU ENTITY - 3D SKETCHER
- case GEOMOp::OpExplode: // MENU ENTITY - EXPLODE
+ case GEOMOp::Op2dSketcher: // MENU ENTITY - SKETCHER
+ case GEOMOp::Op3dSketcher: // MENU ENTITY - 3D SKETCHER
+ case GEOMOp::OpExplode: // MENU ENTITY - EXPLODE
+#ifdef WITH_OPENCV
+ case GEOMOp::OpFeatureDetect: // MENU ENTITY - FEATURE DETECTION
+#endif
+ case GEOMOp::OpPictureImport: // MENU ENTITY - IMPORT PICTURE IN VIEWER
libName = "EntityGUI";
break;
- case GEOMOp::OpEdge: // MENU BUILD - EDGE
- case GEOMOp::OpWire: // MENU BUILD - WIRE
- case GEOMOp::OpFace: // MENU BUILD - FACE
- case GEOMOp::OpShell: // MENU BUILD - SHELL
- case GEOMOp::OpSolid: // MENU BUILD - SOLID
- case GEOMOp::OpCompound: // MENU BUILD - COMPUND
+ case GEOMOp::OpEdge: // MENU BUILD - EDGE
+ case GEOMOp::OpWire: // MENU BUILD - WIRE
+ case GEOMOp::OpFace: // MENU BUILD - FACE
+ case GEOMOp::OpShell: // MENU BUILD - SHELL
+ case GEOMOp::OpSolid: // MENU BUILD - SOLID
+ case GEOMOp::OpCompound: // MENU BUILD - COMPUND
libName = "BuildGUI";
break;
- case GEOMOp::OpFuse: // MENU BOOLEAN - FUSE
- case GEOMOp::OpCommon: // MENU BOOLEAN - COMMON
- case GEOMOp::OpCut: // MENU BOOLEAN - CUT
- case GEOMOp::OpSection: // MENU BOOLEAN - SECTION
+ case GEOMOp::OpFuse: // MENU BOOLEAN - FUSE
+ case GEOMOp::OpCommon: // MENU BOOLEAN - COMMON
+ case GEOMOp::OpCut: // MENU BOOLEAN - CUT
+ case GEOMOp::OpSection: // MENU BOOLEAN - SECTION
libName = "BooleanGUI";
break;
- case GEOMOp::OpTranslate: // MENU TRANSFORMATION - TRANSLATION
- case GEOMOp::OpRotate: // MENU TRANSFORMATION - ROTATION
- case GEOMOp::OpChangeLoc: // MENU TRANSFORMATION - LOCATION
- case GEOMOp::OpMirror: // MENU TRANSFORMATION - MIRROR
- case GEOMOp::OpScale: // MENU TRANSFORMATION - SCALE
- case GEOMOp::OpOffset: // MENU TRANSFORMATION - OFFSET
- case GEOMOp::OpMultiTranslate: // MENU TRANSFORMATION - MULTI-TRANSLATION
- case GEOMOp::OpMultiRotate: // MENU TRANSFORMATION - MULTI-ROTATION
- case GEOMOp::OpReimport: // CONTEXT(POPUP) MENU - RELOAD_IMPORTED
+ case GEOMOp::OpTranslate: // MENU TRANSFORMATION - TRANSLATION
+ case GEOMOp::OpRotate: // MENU TRANSFORMATION - ROTATION
+ case GEOMOp::OpChangeLoc: // MENU TRANSFORMATION - LOCATION
+ case GEOMOp::OpMirror: // MENU TRANSFORMATION - MIRROR
+ case GEOMOp::OpScale: // MENU TRANSFORMATION - SCALE
+ case GEOMOp::OpOffset: // MENU TRANSFORMATION - OFFSET
+ case GEOMOp::OpProjection: // MENU TRANSFORMATION - PROJECTION
+ case GEOMOp::OpMultiTranslate: // MENU TRANSFORMATION - MULTI-TRANSLATION
+ case GEOMOp::OpMultiRotate: // MENU TRANSFORMATION - MULTI-ROTATION
+ case GEOMOp::OpReimport: // CONTEXT(POPUP) MENU - RELOAD_IMPORTED
libName = "TransformationGUI";
break;
- case GEOMOp::OpPartition: // MENU OPERATION - PARTITION
- case GEOMOp::OpArchimede: // MENU OPERATION - ARCHIMEDE
- case GEOMOp::OpFillet3d: // MENU OPERATION - FILLET
- case GEOMOp::OpChamfer: // MENU OPERATION - CHAMFER
- case GEOMOp::OpClipping: // MENU OPERATION - CLIPPING RANGE
- case GEOMOp::OpShapesOnShape: // MENU OPERATION - GET SHAPES ON SHAPE
- case GEOMOp::OpFillet2d: // MENU OPERATION - FILLET 2D
- case GEOMOp::OpFillet1d: // MENU OPERATION - FILLET 1D
- case GEOMOp::OpSharedShapes: // MENU OPERATION - GET SHARED SHAPES
+ case GEOMOp::OpPartition: // MENU OPERATION - PARTITION
+ case GEOMOp::OpArchimede: // MENU OPERATION - ARCHIMEDE
+ case GEOMOp::OpFillet3d: // MENU OPERATION - FILLET
+ case GEOMOp::OpChamfer: // MENU OPERATION - CHAMFER
+ case GEOMOp::OpClipping: // MENU OPERATION - CLIPPING RANGE
+ case GEOMOp::OpShapesOnShape: // MENU OPERATION - GET SHAPES ON SHAPE
+ case GEOMOp::OpFillet2d: // MENU OPERATION - FILLET 2D
+ case GEOMOp::OpFillet1d: // MENU OPERATION - FILLET 1D
+ case GEOMOp::OpSharedShapes: // MENU OPERATION - GET SHARED SHAPES
+ case GEOMOp::OpExtrudedBoss: // MENU OPERATION - EXTRUDED BOSS
+ case GEOMOp::OpExtrudedCut: // MENU OPERATION - EXTRUDED CUT
libName = "OperationGUI";
break;
- case GEOMOp::OpSewing: // MENU REPAIR - SEWING
- case GEOMOp::OpSuppressFaces: // MENU REPAIR - SUPPRESS FACES
- case GEOMOp::OpSuppressHoles: // MENU REPAIR - SUPPRESS HOLE
- case GEOMOp::OpShapeProcess: // MENU REPAIR - SHAPE PROCESSING
- case GEOMOp::OpCloseContour: // MENU REPAIR - CLOSE CONTOUR
- case GEOMOp::OpRemoveIntWires: // MENU REPAIR - REMOVE INTERNAL WIRES
- case GEOMOp::OpAddPointOnEdge: // MENU REPAIR - ADD POINT ON EDGE
- case GEOMOp::OpFreeBoundaries: // MENU MEASURE - FREE BOUNDARIES
- case GEOMOp::OpFreeFaces: // MENU MEASURE - FREE FACES
- case GEOMOp::OpOrientation: // MENU REPAIR - CHANGE ORIENTATION
- case GEOMOp::OpGlueFaces: // MENU REPAIR - GLUE FACES
- case GEOMOp::OpLimitTolerance: // MENU REPAIR - LIMIT TOLERANCE
- case GEOMOp::OpRemoveExtraEdges: // MENU REPAIR - REMOVE EXTRA EDGES
+ case GEOMOp::OpSewing: // MENU REPAIR - SEWING
+ case GEOMOp::OpSuppressFaces: // MENU REPAIR - SUPPRESS FACES
+ case GEOMOp::OpSuppressHoles: // MENU REPAIR - SUPPRESS HOLE
+ case GEOMOp::OpShapeProcess: // MENU REPAIR - SHAPE PROCESSING
+ case GEOMOp::OpCloseContour: // MENU REPAIR - CLOSE CONTOUR
+ case GEOMOp::OpRemoveIntWires: // MENU REPAIR - REMOVE INTERNAL WIRES
+ case GEOMOp::OpAddPointOnEdge: // MENU REPAIR - ADD POINT ON EDGE
+ case GEOMOp::OpFreeBoundaries: // MENU MEASURE - FREE BOUNDARIES
+ case GEOMOp::OpFreeFaces: // MENU MEASURE - FREE FACES
+ case GEOMOp::OpOrientation: // MENU REPAIR - CHANGE ORIENTATION
+ case GEOMOp::OpGlueFaces: // MENU REPAIR - GLUE FACES
+ case GEOMOp::OpGlueEdges: // MENU REPAIR - GLUE EDGES
+ case GEOMOp::OpLimitTolerance: // MENU REPAIR - LIMIT TOLERANCE
+ case GEOMOp::OpRemoveExtraEdges: // MENU REPAIR - REMOVE EXTRA EDGES
libName = "RepairGUI";
break;
- case GEOMOp::OpProperties: // MENU MEASURE - PROPERTIES
- case GEOMOp::OpCenterMass: // MENU MEASURE - CDG
- case GEOMOp::OpInertia: // MENU MEASURE - INERTIA
- case GEOMOp::OpNormale: // MENU MEASURE - NORMALE
- case GEOMOp::OpBoundingBox: // MENU MEASURE - BOUNDING BOX
- case GEOMOp::OpMinDistance: // MENU MEASURE - MIN DISTANCE
- case GEOMOp::OpAngle: // MENU MEASURE - ANGLE
- case GEOMOp::OpTolerance: // MENU MEASURE - TOLERANCE
- case GEOMOp::OpWhatIs: // MENU MEASURE - WHATIS
- case GEOMOp::OpCheckShape: // MENU MEASURE - CHECK
- case GEOMOp::OpCheckCompound: // MENU MEASURE - CHECK COMPOUND OF BLOCKS
- case GEOMOp::OpPointCoordinates: // MENU MEASURE - POINT COORDINATES
+ case GEOMOp::OpProperties: // MENU MEASURE - PROPERTIES
+ case GEOMOp::OpCenterMass: // MENU MEASURE - CDG
+ case GEOMOp::OpInertia: // MENU MEASURE - INERTIA
+ case GEOMOp::OpNormale: // MENU MEASURE - NORMALE
+ case GEOMOp::OpBoundingBox: // MENU MEASURE - BOUNDING BOX
+ case GEOMOp::OpMinDistance: // MENU MEASURE - MIN DISTANCE
+ case GEOMOp::OpAngle: // MENU MEASURE - ANGLE
+ case GEOMOp::OpTolerance: // MENU MEASURE - TOLERANCE
+ case GEOMOp::OpWhatIs: // MENU MEASURE - WHATIS
+ case GEOMOp::OpCheckShape: // MENU MEASURE - CHECK
+ case GEOMOp::OpCheckCompound: // MENU MEASURE - CHECK COMPOUND OF BLOCKS
+ case GEOMOp::OpPointCoordinates: // MENU MEASURE - POINT COORDINATES
+ case GEOMOp::OpCheckSelfInters: // MENU MEASURE - CHECK SELF INTERSECTIONS
libName = "MeasureGUI";
break;
- case GEOMOp::OpGroupCreate: // MENU GROUP - CREATE
- case GEOMOp::OpGroupCreatePopup: // POPUP MENU - CREATE GROUP
- case GEOMOp::OpGroupEdit: // MENU GROUP - EDIT
+ case GEOMOp::OpGroupCreate: // MENU GROUP - CREATE
+ case GEOMOp::OpGroupCreatePopup: // POPUP MENU - CREATE GROUP
+ case GEOMOp::OpGroupEdit: // MENU GROUP - EDIT
libName = "GroupGUI";
break;
- case GEOMOp::OpHexaSolid: // MENU BLOCKS - HEXAHEDRAL SOLID
- case GEOMOp::OpMultiTransform: // MENU BLOCKS - MULTI-TRANSFORMATION
- case GEOMOp::OpQuadFace: // MENU BLOCKS - QUADRANGLE FACE
- case GEOMOp::OpPropagate: // MENU BLOCKS - PROPAGATE
- case GEOMOp::OpExplodeBlock: // MENU BLOCKS - EXPLODE ON BLOCKS
+ case GEOMOp::OpHexaSolid: // MENU BLOCKS - HEXAHEDRAL SOLID
+ case GEOMOp::OpMultiTransform: // MENU BLOCKS - MULTI-TRANSFORMATION
+ case GEOMOp::OpQuadFace: // MENU BLOCKS - QUADRANGLE FACE
+ case GEOMOp::OpPropagate: // MENU BLOCKS - PROPAGATE
+ case GEOMOp::OpExplodeBlock: // MENU BLOCKS - EXPLODE ON BLOCKS
libName = "BlocksGUI";
break;
- case GEOMOp::OpAdvancedNoOp: // NO OPERATION (advanced operations base)
- case GEOMOp::OpPipeTShape: // MENU NEW ENTITY - ADVANCED - PIPE TSHAPE
+ case GEOMOp::OpAdvancedNoOp: // NO OPERATION (advanced operations base)
+ case GEOMOp::OpPipeTShape: // MENU NEW ENTITY - ADVANCED - PIPE TSHAPE
// case GEOMOp::OpPipeTShapeGroups: // MENU NEW ENTITY - ADVANCED - PIPE TSHAPE GROUPS
//@@ insert new functions before this line @@ do not remove this line @@ do not remove this line @@ do not remove this line @@ do not remove this line @@//
libName = "AdvancedGUI";
}
// call method of corresponding GUI library
- if ( library )
+ if ( library ) {
library->OnGUIEvent( id, desk );
+
+ // Update a list of materials for "Preferences" dialog
+ if ( id == GEOMOp::OpMaterialProperties ) {
+ LightApp_Preferences* pref = preferences();
+ if ( pref ) {
+ Material_ResourceMgr aMatResMgr;
+ QStringList aPerfMatNames = aMatResMgr.getPreferenceMaterialsNames();
+ setPreferenceProperty( pref->rootItem()->findItem( tr( "PREF_FRONT_MATERIAL" ), true )->id(),
+ "strings",
+ aPerfMatNames );
+ setPreferenceProperty( pref->rootItem()->findItem( tr( "PREF_BACK_MATERIAL" ), true )->id(),
+ "strings",
+ aPerfMatNames );
+ }
+ }
+ }
else
SUIT_MessageBox::critical( desk, tr( "GEOM_ERROR" ), tr( "GEOM_ERR_LIB_NOT_FOUND" ), tr( "GEOM_BUT_OK" ) );
}
lib->OnMouseMove( e, application()->desktop(), w );
}
+//=================================================================================
+// function : GeometryGUI::OnMouseRelease()
+// purpose : Manages mouse release events [static]
+//=================================================================================
+void GeometryGUI::OnMouseRelease( SUIT_ViewWindow* w, QMouseEvent* e )
+{
+ if ( !application() )
+ return;
+ foreach ( GEOMGUI* lib, myGUIMap )
+ lib->OnMouseRelease( e, application()->desktop(), w );
+}
+
//=================================================================================
// function : GeometryGUI::OnMousePress()
// purpose : Manage mouse press events [static]
createGeomAction( GEOMOp::Op2dSketcher, "SKETCH" );
createGeomAction( GEOMOp::Op3dSketcher, "3DSKETCH" );
createGeomAction( GEOMOp::OpExplode, "EXPLODE" );
+#ifdef WITH_OPENCV
+ createGeomAction( GEOMOp::OpFeatureDetect,"FEATURE_DETECTION" );
+#endif
+ createGeomAction( GEOMOp::OpPictureImport,"PICTURE_IMPORT" );
createGeomAction( GEOMOp::OpEdge, "EDGE" );
createGeomAction( GEOMOp::OpWire, "WIRE" );
createGeomAction( GEOMOp::OpMirror, "MIRROR" );
createGeomAction( GEOMOp::OpScale, "SCALE" );
createGeomAction( GEOMOp::OpOffset, "OFFSET" );
+ createGeomAction( GEOMOp::OpProjection, "PROJECTION" );
createGeomAction( GEOMOp::OpMultiTranslate, "MUL_TRANSLATION" );
createGeomAction( GEOMOp::OpMultiRotate, "MUL_ROTATION" );
//createGeomAction( GEOMOp::OpClipping, "CLIPPING" );
createGeomAction( GEOMOp::OpShapesOnShape, "GET_SHAPES_ON_SHAPE" );
createGeomAction( GEOMOp::OpSharedShapes, "GET_SHARED_SHAPES" );
+ createGeomAction( GEOMOp::OpExtrudedCut, "EXTRUDED_CUT" );
+ createGeomAction( GEOMOp::OpExtrudedBoss, "EXTRUDED_BOSS" );
createGeomAction( GEOMOp::OpFillet1d, "FILLET_1D" );
createGeomAction( GEOMOp::OpFillet2d, "FILLET_2D" );
createGeomAction( GEOMOp::OpSewing, "SEWING" );
createGeomAction( GEOMOp::OpGlueFaces, "GLUE_FACES" );
+ createGeomAction( GEOMOp::OpGlueEdges, "GLUE_EDGES" );
createGeomAction( GEOMOp::OpLimitTolerance, "LIMIT_TOLERANCE" );
createGeomAction( GEOMOp::OpSuppressFaces, "SUPPRESS_FACES" );
createGeomAction( GEOMOp::OpSuppressHoles, "SUPPERSS_HOLES" );
createGeomAction( GEOMOp::OpWhatIs, "WHAT_IS" );
createGeomAction( GEOMOp::OpCheckShape, "CHECK" );
createGeomAction( GEOMOp::OpCheckCompound, "CHECK_COMPOUND" );
+ createGeomAction( GEOMOp::OpCheckSelfInters, "CHECK_SELF_INTERSECTIONS" );
#ifdef _DEBUG_ // PAL16821
createGeomAction( GEOMOp::OpCheckGeom, "CHECK_GEOMETRY" );
createGeomAction( GEOMOp::OpWireframe, "POP_WIREFRAME", "", 0, true );
createGeomAction( GEOMOp::OpShading, "POP_SHADING", "", 0, true );
+ createGeomAction( GEOMOp::OpShadingWithEdges, "POP_SHADING_WITH_EDGES", "", 0, true );
+ createGeomAction( GEOMOp::OpTexture, "POP_TEXTURE", "", 0, true );
+ createGeomAction( GEOMOp::OpEdgeWidth, "EDGE_WIDTH");
+ createGeomAction( GEOMOp::OpIsosWidth, "ISOS_WIDTH");
createGeomAction( GEOMOp::OpVectors, "POP_VECTORS", "", 0, true );
createGeomAction( GEOMOp::OpDeflection, "POP_DEFLECTION" );
createGeomAction( GEOMOp::OpColor, "POP_COLOR" );
+ createGeomAction( GEOMOp::OpSetTexture, "POP_SETTEXTURE" );
createGeomAction( GEOMOp::OpTransparency, "POP_TRANSPARENCY" );
createGeomAction( GEOMOp::OpIsos, "POP_ISOS" );
createGeomAction( GEOMOp::OpAutoColor, "POP_AUTO_COLOR" );
createGeomAction( GEOMOp::OpUnpublishObject, "POP_UNPUBLISH_OBJ" );
createGeomAction( GEOMOp::OpPublishObject, "POP_PUBLISH_OBJ" );
createGeomAction( GEOMOp::OpPointMarker, "POP_POINT_MARKER" );
+ createGeomAction( GEOMOp::OpMaterialProperties, "POP_MATERIAL_PROPERTIES" );
createGeomAction( GEOMOp::OpPipeTShape, "PIPETSHAPE" );
createMenu( GEOMOp::OpArc, basicId, -1 );
createMenu( GEOMOp::OpCurve, basicId, -1 );
createMenu( separator(), basicId, -1 );
+ createMenu( GEOMOp::Op2dSketcher, basicId, -1 );
+ createMenu( GEOMOp::Op3dSketcher, basicId, -1 );
createMenu( GEOMOp::OpVector, basicId, -1 );
createMenu( GEOMOp::OpPlane, basicId, -1 );
createMenu( GEOMOp::OpLCS, basicId, -1 );
createMenu( GEOMOp::OpCone, primId, -1 );
createMenu( GEOMOp::OpRectangle, primId, -1 );
createMenu( GEOMOp::OpDisk, primId, -1 );
+ createMenu( GEOMOp::OpPipeTShape,primId, -1 );
int genId = createMenu( tr( "MEN_GENERATION" ), newEntId, -1 );
createMenu( GEOMOp::OpPrism, genId, -1 );
createMenu( GEOMOp::OpFilling, genId, -1 );
createMenu( GEOMOp::OpPipe, genId, -1 );
- int advId = createMenu( tr( "MEN_ADVANCED" ), newEntId, -1 );
- createMenu( GEOMOp::OpPipeTShape, advId, -1 );
+// int advId = createMenu( tr( "MEN_ADVANCED" ), newEntId, -1 );
+// createMenu( GEOMOp::OpPipeTShape, advId, -1 );
// createMenu( GEOMOp::OpPipeTShapeGroups, advId, -1 );
//@@ insert new functions before this line @@ do not remove this line @@ do not remove this line @@ do not remove this line @@ do not remove this line @@//
createMenu( separator(), newEntId, -1 );
- createMenu( GEOMOp::Op2dSketcher, newEntId, -1 );
- createMenu( GEOMOp::Op3dSketcher, newEntId, -1 );
-
- createMenu( separator(), newEntId, -1 );
-
createMenu( GEOMOp::OpExplode, newEntId, -1 );
int buildId = createMenu( tr( "MEN_BUILD" ), newEntId, -1 );
createMenu( GEOMOp::OpShell, buildId, -1 );
createMenu( GEOMOp::OpSolid, buildId, -1 );
createMenu( GEOMOp::OpCompound, buildId, -1 );
+
+ createMenu( separator(), newEntId, -1 );
+
+ createMenu( GEOMOp::OpPictureImport, newEntId, -1 );
+#ifdef WITH_OPENCV
+ createMenu( GEOMOp::OpFeatureDetect, newEntId, -1 );
+#endif
int operId = createMenu( tr( "MEN_OPERATIONS" ), -1, -1, 10 );
createMenu( GEOMOp::OpMirror, transId, -1 );
createMenu( GEOMOp::OpScale, transId, -1 );
createMenu( GEOMOp::OpOffset, transId, -1 );
+ createMenu( GEOMOp::OpProjection, transId, -1 );
createMenu( separator(), transId, -1 );
createMenu( GEOMOp::OpMultiTranslate, transId, -1 );
createMenu( GEOMOp::OpMultiRotate, transId, -1 );
createMenu( GEOMOp::OpFillet2d, operId, -1 );
createMenu( GEOMOp::OpFillet3d, operId, -1 );
createMenu( GEOMOp::OpChamfer, operId, -1 );
+ createMenu( GEOMOp::OpExtrudedBoss, operId, -1 );
+ createMenu( GEOMOp::OpExtrudedCut, operId, -1 );
//createMenu( GEOMOp::OpClipping, operId, -1 );
int repairId = createMenu( tr( "MEN_REPAIR" ), -1, -1, 10 );
createMenu( GEOMOp::OpSuppressHoles, repairId, -1 );
createMenu( GEOMOp::OpSewing, repairId, -1 );
createMenu( GEOMOp::OpGlueFaces, repairId, -1 );
+ createMenu( GEOMOp::OpGlueEdges, repairId, -1 );
createMenu( GEOMOp::OpLimitTolerance, repairId, -1 );
createMenu( GEOMOp::OpAddPointOnEdge, repairId, -1 );
//createMenu( GEOMOp::OpFreeBoundaries, repairId, -1 );
createMenu( GEOMOp::OpMinDistance, dimId, -1 );
createMenu( GEOMOp::OpAngle, dimId, -1 );
- createMenu( separator(), measurId, -1 );
- createMenu( GEOMOp::OpTolerance, measurId, -1 );
- createMenu( separator(), measurId, -1 );
- createMenu( GEOMOp::OpWhatIs, measurId, -1 );
- createMenu( GEOMOp::OpCheckShape, measurId, -1 );
- createMenu( GEOMOp::OpCheckCompound, measurId, -1 );
+ createMenu( separator(), measurId, -1 );
+ createMenu( GEOMOp::OpTolerance, measurId, -1 );
+ createMenu( separator(), measurId, -1 );
+ createMenu( GEOMOp::OpWhatIs, measurId, -1 );
+ createMenu( GEOMOp::OpCheckShape, measurId, -1 );
+ createMenu( GEOMOp::OpCheckCompound, measurId, -1 );
+ createMenu( GEOMOp::OpCheckSelfInters, measurId, -1 );
#ifdef _DEBUG_ // PAL16821
int toolsId = createMenu( tr( "MEN_TOOLS" ), -1, -1, 50 );
*/
// ---- create toolbars --------------------------
-
+
int basicTbId = createTool( tr( "TOOL_BASIC" ) );
- createTool( GEOMOp::OpPoint, basicTbId );
- createTool( GEOMOp::OpLine, basicTbId );
- createTool( GEOMOp::OpCircle, basicTbId );
- createTool( GEOMOp::OpEllipse, basicTbId );
- createTool( GEOMOp::OpArc, basicTbId );
- createTool( GEOMOp::OpCurve, basicTbId );
- createTool( GEOMOp::OpVector, basicTbId );
- createTool( GEOMOp::OpPlane, basicTbId );
- createTool( GEOMOp::OpLCS, basicTbId );
+ createTool( GEOMOp::OpPoint, basicTbId );
+ createTool( GEOMOp::OpLine, basicTbId );
+ createTool( GEOMOp::OpCircle, basicTbId );
+ createTool( GEOMOp::OpEllipse, basicTbId );
+ createTool( GEOMOp::OpArc, basicTbId );
+ createTool( GEOMOp::OpCurve, basicTbId );
+ createTool( GEOMOp::OpVector, basicTbId );
+ createTool( GEOMOp::Op2dSketcher, basicTbId ); //rnc
+ createTool( GEOMOp::Op3dSketcher, basicTbId ); //rnc
+ createTool( GEOMOp::OpPlane, basicTbId );
+ createTool( GEOMOp::OpLCS, basicTbId );
createTool( GEOMOp::OpOriginAndVectors, basicTbId );
-
+
+// int sketchTbId = createTool( tr( "TOOL_SKETCH" ) );
+// createTool( GEOMOp::Op2dSketcher, sketchTbId );
+// createTool( GEOMOp::Op3dSketcher, sketchTbId );
+
int primTbId = createTool( tr( "TOOL_PRIMITIVES" ) );
- createTool( GEOMOp::OpBox, primTbId );
- createTool( GEOMOp::OpCylinder, primTbId );
- createTool( GEOMOp::OpSphere, primTbId );
- createTool( GEOMOp::OpTorus, primTbId );
- createTool( GEOMOp::OpCone, primTbId );
- createTool( GEOMOp::OpRectangle, primTbId );
- createTool( GEOMOp::OpDisk, primTbId );
-
+ createTool( GEOMOp::OpBox, primTbId );
+ createTool( GEOMOp::OpCylinder, primTbId );
+ createTool( GEOMOp::OpSphere, primTbId );
+ createTool( GEOMOp::OpTorus, primTbId );
+ createTool( GEOMOp::OpCone, primTbId );
+ createTool( GEOMOp::OpRectangle, primTbId );
+ createTool( GEOMOp::OpDisk, primTbId );
+ createTool( GEOMOp::OpPipeTShape, primTbId ); //rnc
+
+// int advancedTbId = createTool( tr( "TOOL_ADVANCED" ) ); //rnc
+// createTool( GEOMOp::OpPipeTShape, advancedTbId );
+
int boolTbId = createTool( tr( "TOOL_BOOLEAN" ) );
- createTool( GEOMOp::OpFuse, boolTbId );
- createTool( GEOMOp::OpCommon, boolTbId );
- createTool( GEOMOp::OpCut, boolTbId );
- createTool( GEOMOp::OpSection, boolTbId );
-
- int genTbId = createTool( tr( "TOOL_GENERATION" ) );
+ createTool( GEOMOp::OpFuse, boolTbId );
+ createTool( GEOMOp::OpCommon, boolTbId );
+ createTool( GEOMOp::OpCut, boolTbId );
+ createTool( GEOMOp::OpSection, boolTbId );
+
+ int genTbId = createTool( tr( "TOOL_GENERATION" ) );
createTool( GEOMOp::OpPrism, genTbId );
createTool( GEOMOp::OpRevolution, genTbId );
createTool( GEOMOp::OpFilling, genTbId );
createTool( GEOMOp::OpPipe, genTbId );
-
+
int transTbId = createTool( tr( "TOOL_TRANSFORMATION" ) );
createTool( GEOMOp::OpTranslate, transTbId );
createTool( GEOMOp::OpRotate, transTbId );
createTool( GEOMOp::OpMirror, transTbId );
createTool( GEOMOp::OpScale, transTbId );
createTool( GEOMOp::OpOffset, transTbId );
+ createTool( GEOMOp::OpProjection, transTbId );
createTool( separator(), transTbId );
createTool( GEOMOp::OpMultiTranslate, transTbId );
createTool( GEOMOp::OpMultiRotate, transTbId );
-
+
int operTbId = createTool( tr( "TOOL_OPERATIONS" ) );
- createTool( GEOMOp::Op2dSketcher, operTbId );
- createTool( GEOMOp::Op3dSketcher, operTbId );
- createTool( separator(), operTbId );
createTool( GEOMOp::OpExplode, operTbId );
- createTool( separator(), operTbId );
createTool( GEOMOp::OpPartition, operTbId );
createTool( GEOMOp::OpArchimede, operTbId );
createTool( GEOMOp::OpShapesOnShape, operTbId );
createTool( GEOMOp::OpSharedShapes, operTbId );
- createTool( separator(), operTbId );
- createTool( GEOMOp::OpFillet1d, operTbId );
- createTool( GEOMOp::OpFillet2d, operTbId );
- createTool( GEOMOp::OpFillet3d, operTbId );
- createTool( GEOMOp::OpChamfer, operTbId );
-
+
+ int featTbId = createTool( tr( "TOOL_FEATURES" ) );
+ createTool( GEOMOp::OpFillet1d, featTbId );
+ createTool( GEOMOp::OpFillet2d, featTbId );
+ createTool( GEOMOp::OpFillet3d, featTbId );
+ createTool( GEOMOp::OpChamfer, featTbId );
+ createTool( GEOMOp::OpExtrudedBoss, featTbId );
+ createTool( GEOMOp::OpExtrudedCut, featTbId );
+
int buildTbId = createTool( tr( "TOOL_BUILD" ) );
createTool( GEOMOp::OpEdge, buildTbId );
createTool( GEOMOp::OpWire, buildTbId );
createTool( GEOMOp::OpWhatIs, measureTbId );
createTool( GEOMOp::OpCheckShape, measureTbId );
createTool( GEOMOp::OpCheckCompound, measureTbId );
+ createTool( GEOMOp::OpCheckSelfInters, measureTbId );
+
+ int picturesTbId = createTool( tr( "TOOL_PICTURES" ) );
+ createTool( GEOMOp::OpPictureImport, picturesTbId );
+ #ifdef WITH_OPENCV
+ createTool( GEOMOp::OpFeatureDetect, picturesTbId );
+ #endif
- int advancedTbId = createTool( tr( "TOOL_ADVANCED" ) );
- createTool( GEOMOp::OpPipeTShape, advancedTbId );
//@@ insert new functions before this line @@ do not remove this line @@ do not remove this line @@ do not remove this line @@ do not remove this line @@//
// ---- create popup menus --------------------------
QString clientOCCorVTK = "(client='OCCViewer' or client='VTKViewer')";
+ QString clientOCC = "(client='OCCViewer')";
QString clientOCCorVTK_AndSomeVisible = clientOCCorVTK + " and selcount>0 and isVisible";
+ QString clientOCC_AndSomeVisible = clientOCC + " and selcount>0 and isVisible";
+ QString clientOCCorOB = "(client='ObjectBrowser' or client='OCCViewer')";
QString clientOCCorVTKorOB = "(client='ObjectBrowser' or client='OCCViewer' or client='VTKViewer')";
QString clientOCCorVTKorOB_AndSomeVisible = clientOCCorVTKorOB + " and selcount>0 and isVisible";
+ QString clientOCCorOB_AndSomeVisible = clientOCCorOB + " and selcount>0 and isVisible";
QString autoColorPrefix =
"(client='ObjectBrowser' or client='OCCViewer') and type='Shape' and selcount=1 and isOCC=true";
mgr->insert( action( GEOMOp::OpShading ), dispmodeId, -1 ); // shading
mgr->setRule( action( GEOMOp::OpShading ), clientOCCorVTK_AndSomeVisible, QtxPopupMgr::VisibleRule );
mgr->setRule( action( GEOMOp::OpShading ), clientOCCorVTK + " and displaymode='Shading'", QtxPopupMgr::ToggleRule );
+ mgr->insert( action( GEOMOp::OpShadingWithEdges ), dispmodeId, -1 ); // shading with edges
+ mgr->setRule( action( GEOMOp::OpShadingWithEdges ), clientOCCorVTK_AndSomeVisible, QtxPopupMgr::VisibleRule );
+ mgr->setRule( action( GEOMOp::OpShadingWithEdges ), clientOCCorVTK + " and displaymode='ShadingWithEdges'", QtxPopupMgr::ToggleRule );
+ mgr->insert( action( GEOMOp::OpTexture ), dispmodeId, -1 ); // wireframe
+ mgr->setRule( action( GEOMOp::OpTexture ), clientOCC_AndSomeVisible, QtxPopupMgr::VisibleRule );
+ mgr->setRule( action( GEOMOp::OpTexture), clientOCC + " and displaymode='Texture'", QtxPopupMgr::ToggleRule );
mgr->insert( separator(), dispmodeId, -1 );
mgr->insert( action( GEOMOp::OpVectors ), dispmodeId, -1 ); // vectors
mgr->setRule( action( GEOMOp::OpVectors ), clientOCCorVTK_AndSomeVisible, QtxPopupMgr::VisibleRule );
mgr->insert( action( GEOMOp::OpPointMarker ), -1, -1 ); // point marker
//mgr->setRule( action( GEOMOp::OpPointMarker ), QString( "selcount>0 and $typeid in {%1}" ).arg(GEOM_POINT ), QtxPopupMgr::VisibleRule );
mgr->setRule( action( GEOMOp::OpPointMarker ), QString( "selcount>0 and ( $typeid in {%1} or compoundOfVertices=true ) " ).arg(GEOM::VERTEX).arg(GEOM::COMPOUND), QtxPopupMgr::VisibleRule );
+ mgr->insert( action( GEOMOp::OpMaterialProperties ), -1, -1 ); // material properties
+ mgr->setRule( action( GEOMOp::OpMaterialProperties ), clientOCCorVTK_AndSomeVisible + " and ($component={'GEOM'}) and selcount>0 and isVisible", QtxPopupMgr::VisibleRule );
+ mgr->insert( action( GEOMOp::OpSetTexture ), -1, -1 ); // texture
+ mgr->setRule( action( GEOMOp::OpSetTexture ), clientOCCorOB_AndSomeVisible + " and ($component={'GEOM'})", QtxPopupMgr::VisibleRule );
+
+ int lineW = mgr->insert( tr( "MEN_LINE_WIDTH" ), -1, -1 ); // line width menu
+ mgr->insert( action( GEOMOp::OpEdgeWidth ), lineW, -1 ); // edge width
+ mgr->setRule( action( GEOMOp::OpEdgeWidth ), clientOCCorVTK_AndSomeVisible, QtxPopupMgr::VisibleRule );
+
+ mgr->insert( action( GEOMOp::OpIsosWidth ), lineW, -1 ); // isos width
+ mgr->setRule( action( GEOMOp::OpIsosWidth ), clientOCCorVTK_AndSomeVisible, QtxPopupMgr::VisibleRule );
+
mgr->insert( separator(), -1, -1 ); // -----------
mgr->insert( action( GEOMOp::OpAutoColor ), -1, -1 ); // auto color
mgr->setRule( action( GEOMOp::OpAutoColor ), autoColorPrefix + " and isAutoColor=false", QtxPopupMgr::VisibleRule );
mgr->insert( action( GEOMOp::OpPublishObject ), -1, -1 ); // Publish object
mgr->setRule( action( GEOMOp::OpPublishObject ), QString("client='ObjectBrowser' and isComponent=true"), QtxPopupMgr::VisibleRule );
+ mgr->insert( action( GEOMOp::OpReimport ), -1, -1 ); // delete
+ mgr->setRule( action( GEOMOp::OpReimport ), QString("$imported in {'true'} and selcount>0"), QtxPopupMgr::VisibleRule );
mgr->hide( mgr->actionId( action( myEraseAll ) ) );
}
// import Python module that manages GEOM plugins (need to be here because SalomePyQt API uses active module)
PyGILState_STATE gstate = PyGILState_Ensure();
- PyObject* pluginsmanager=PyImport_ImportModule((char*)"salome_pluginsmanager");
+ PyObject* pluginsmanager=PyImport_ImportModuleNoBlock((char*)"salome_pluginsmanager");
if(pluginsmanager==NULL)
PyErr_Print();
else
this, SLOT( OnMousePress( SUIT_ViewWindow*, QMouseEvent* ) ) );
connect( vm, SIGNAL( mouseMove ( SUIT_ViewWindow*, QMouseEvent* ) ),
this, SLOT( OnMouseMove( SUIT_ViewWindow*, QMouseEvent* ) ) );
-
+ connect( vm, SIGNAL( mouseRelease ( SUIT_ViewWindow*, QMouseEvent* ) ),
+ this, SLOT( OnMouseRelease( SUIT_ViewWindow*, QMouseEvent* ) ) );
+
LightApp_SelectionMgr* sm = getApp()->selectionMgr();
myOCCSelectors.append( new GEOMGUI_OCCSelector( ((OCCViewer_ViewManager*)vm)->getOCCViewer(), sm ) );
return "";
}
-Handle(Graphic3d_HArray1OfBytes) GeometryGUI::getTexture( SalomeApp_Study* theStudy, int theId, int& theWidth, int& theHeight )
+#if OCC_VERSION_LARGE > 0x06040000 // Porting to OCCT6.5.1
+Handle(TColStd_HArray1OfByte) GeometryGUI::getTexture
+#else
+Handle(Graphic3d_HArray1OfBytes) GeometryGUI::getTexture
+#endif
+ (SalomeApp_Study* theStudy, int theId, int& theWidth, int& theHeight)
{
theWidth = theHeight = 0;
+
+#if OCC_VERSION_LARGE > 0x06040000 // Porting to OCCT6.5.1
+ Handle(TColStd_HArray1OfByte) aTexture;
+#else
Handle(Graphic3d_HArray1OfBytes) aTexture;
- if ( theStudy ) {
+#endif
+
+ if (theStudy) {
TextureMap aTextureMap = myTextureMap[ theStudy->studyDS()->StudyId() ];
aTexture = aTextureMap[ theId ];
if ( aTexture.IsNull() ) {
if ( aWidth > 0 && aHeight > 0 && aStream->length() > 0 ) {
theWidth = aWidth;
theHeight = aHeight;
- aTexture = new Graphic3d_HArray1OfBytes( 1, aStream->length() );
- for ( int i = 0; i < aStream->length(); i++ )
+
+#if OCC_VERSION_LARGE > 0x06040000 // Porting to OCCT6.5.1
+ aTexture = new TColStd_HArray1OfByte (1, aStream->length());
+#else
+ aTexture = new Graphic3d_HArray1OfBytes (1, aStream->length());
+#endif
+
+ for (int i = 0; i < aStream->length(); i++)
aTexture->SetValue( i+1, (Standard_Byte)aStream[i] );
aTextureMap[ theId ] = aTexture;
}
void GeometryGUI::contextMenuPopup( const QString& client, QMenu* menu, QString& title )
{
- SalomeApp_Module::contextMenuPopup(client, menu, title);
+ SalomeApp_Module::contextMenuPopup( client, menu, title );
+ /*
SALOME_ListIO lst;
getApp()->selectionMgr()->selectedObjects(lst);
if (lst.Extent() < 1)
if (isImported) {
menu->addAction(action(GEOMOp::OpReimport)); // Reload imported shape
}
+ */
}
void GeometryGUI::createPreferences()
addPreference( tr( "PREF_SHADING_COLOR" ), genGroup,
LightApp_Preferences::Color, "Geometry", "shading_color" );
+ addPreference( tr( "PREF_EDGES_IN_SHADING" ), genGroup,
+ LightApp_Preferences::Color, "Geometry", "edges_in_shading_color" );
+
addPreference( tr( "PREF_WIREFRAME_COLOR" ), genGroup,
LightApp_Preferences::Color, "Geometry", "wireframe_color" );
int defl = addPreference( tr( "PREF_DEFLECTION" ), genGroup,
LightApp_Preferences::DblSpin, "Geometry", "deflection_coeff" );
+ int front_material = addPreference( tr( "PREF_FRONT_MATERIAL" ), genGroup,
+ LightApp_Preferences::Selector,
+ "Geometry", "front_material" );
+
+ int back_material = addPreference( tr( "PREF_BACK_MATERIAL" ), genGroup,
+ LightApp_Preferences::Selector,
+ "Geometry", "back_material" );
+
+ const int nb = 4;
+ int wd[nb];
+ int iter=0;
+
+ wd[iter++] = addPreference( tr( "PREF_EDGE_WIDTH" ), genGroup,
+ LightApp_Preferences::IntSpin, "Geometry", "edge_width" );
+
+ wd[iter++] = addPreference( tr( "PREF_ISOLINES_WIDTH" ), genGroup,
+ LightApp_Preferences::IntSpin, "Geometry", "isolines_width" );
+
+ wd[iter++] = addPreference( tr( "PREF_PREVIEW_EDGE_WIDTH" ), genGroup,
+ LightApp_Preferences::IntSpin, "Geometry", "preview_edge_width" );
+
+ wd[iter++] = addPreference( tr( "PREF_MEASURES_LINE_WIDTH" ), genGroup,
+ LightApp_Preferences::IntSpin, "Geometry", "measures_line_width" );
+
+ for(int i = 0; i < nb; i++) {
+ setPreferenceProperty( wd[i], "min", 1 );
+ setPreferenceProperty( wd[i], "max", 5 );
+ }
+
+
// Quantities with individual precision settings
int precGroup = addPreference( tr( "GEOM_PREF_GROUP_PRECISION" ), tabId );
setPreferenceProperty( precGroup, "columns", 2 );
QStringList aModesList;
aModesList.append( tr("MEN_WIREFRAME") );
aModesList.append( tr("MEN_SHADING") );
+ aModesList.append( tr("MEN_SHADING_WITH_EDGES") );
QList<QVariant> anIndexesList;
anIndexesList.append(0);
anIndexesList.append(1);
+ anIndexesList.append(2);
setPreferenceProperty( dispmode, "strings", aModesList );
setPreferenceProperty( dispmode, "indexes", anIndexesList );
setPreferenceProperty( defl, "step", 1.0e-04 );
setPreferenceProperty( defl, "precision", 6 );
+ // Set property for default material
+ Material_ResourceMgr aMatResMgr;
+ QStringList aPrefMatNames = aMatResMgr.getPreferenceMaterialsNames();
+ setPreferenceProperty( front_material, "strings", aPrefMatNames );
+ setPreferenceProperty( back_material, "strings", aPrefMatNames );
+
// Set property vertex marker type
QList<QVariant> aMarkerTypeIndicesList;
QList<QVariant> aMarkerTypeIconsList;
int operationsGroup = addPreference( tr( "PREF_GROUP_OPERATIONS" ), tabId );
setPreferenceProperty( operationsGroup, "columns", 2 );
-
+
addPreference( tr( "GEOM_PREVIEW" ), operationsGroup,
LightApp_Preferences::Bool, "Geometry", "geom_preview" );
-
}
void GeometryGUI::preferencesChanged( const QString& section, const QString& param )
* \brief Store visual parameters
*
* This method is called just before the study document is saved.
- * Store visual parameters in AttributeParameter attribue(s)
+ * Store visual parameters in AttributeParameter attribute(s)
*/
void GeometryGUI::storeVisualParameters (int savePoint)
{
SalomeApp_Study* appStudy = dynamic_cast<SalomeApp_Study*>(application()->activeStudy());
- if (!appStudy || !appStudy->studyDS())
+ if ( !appStudy || !appStudy->studyDS() )
return;
_PTR(Study) studyDS = appStudy->studyDS();
for (int i = 0, iEnd = vman->getViewsCount(); i < iEnd; i++) {
const ObjMap anObjects = appStudy->getObjectMap(aMgrId);
ObjMap::ConstIterator o_it = anObjects.begin();
- for( ;o_it != anObjects.end(); o_it++ ) {
+ for (; o_it != anObjects.end(); o_it++) {
const PropMap aProps = o_it.value();
//Check that object exists in the study
_PTR(SObject) obj( studyDS->FindObjectID( o_it.key().toLatin1().data() ) );
- if ( !obj )
+ if ( !obj || !(aProps.count() > 0))
continue;
// entry is "encoded" = it does NOT contain component adress, since it is a
// subject to change on next component loading
if( !obj->FindAttribute(anAttr, "AttributeIOR"))
continue;
- std::string param, occParam = vType.toLatin1().data();
+ std::string param,occParam = vType.toLatin1().data();
occParam += NAME_SEPARATOR;
occParam += QString::number(aMgrId).toLatin1().data();
occParam += NAME_SEPARATOR;
- param = occParam + VISIBILITY_PROP;
- ip->setParameter(entry, param, aProps.value(VISIBILITY_PROP).toInt() == 1 ? "On" : "Off");
-
- param = occParam + DISPLAY_MODE_PROP;
+ if(aProps.contains(VISIBILITY_PROP)) {
+ param = occParam + VISIBILITY_PROP;
+ ip->setParameter(entry, param, aProps.value(VISIBILITY_PROP).toInt() == 1 ? "On" : "Off");
+ }
- ip->setParameter(entry, param, QString::number(aProps.value(DISPLAY_MODE_PROP).toInt()).toLatin1().data());
+ if(aProps.contains(DISPLAY_MODE_PROP)) {
+ param = occParam + DISPLAY_MODE_PROP;
+ ip->setParameter(entry, param, QString::number(aProps.value(DISPLAY_MODE_PROP).toInt()).toLatin1().data());
+ }
- QColor c = aProps.value(COLOR_PROP).value<QColor>();
- QString colorStr = QString::number(c.red()/255.);
- colorStr += DIGIT_SEPARATOR; colorStr += QString::number(c.green()/255.);
- colorStr += DIGIT_SEPARATOR; colorStr += QString::number(c.blue()/255.);
- param = occParam + COLOR_PROP;
- ip->setParameter(entry, param, colorStr.toLatin1().data());
+ if(aProps.contains(COLOR_PROP)) {
+ QColor c = aProps.value(COLOR_PROP).value<QColor>();
+ QString colorStr = QString::number(c.red()/255.);
+ colorStr += DIGIT_SEPARATOR; colorStr += QString::number(c.green()/255.);
+ colorStr += DIGIT_SEPARATOR; colorStr += QString::number(c.blue()/255.);
+ param = occParam + COLOR_PROP;
+ ip->setParameter(entry, param, colorStr.toLatin1().data());
+ }
if(vType == SVTK_Viewer::Type()) {
- param = occParam + OPACITY_PROP;
- ip->setParameter(entry, param, QString::number(1. - aProps.value(TRANSPARENCY_PROP).toDouble()).toLatin1().data());
+ if(aProps.contains(OPACITY_PROP)) {
+ param = occParam + OPACITY_PROP;
+ ip->setParameter(entry, param, QString::number(1. - aProps.value(TRANSPARENCY_PROP).toDouble()).toLatin1().data());
+ }
} else if (vType == SOCC_Viewer::Type()) {
- param = occParam + TRANSPARENCY_PROP;
- ip->setParameter(entry, param, QString::number(aProps.value(TRANSPARENCY_PROP).toDouble()).toLatin1().data());
+ if(aProps.contains(TRANSPARENCY_PROP)) {
+ param = occParam + TRANSPARENCY_PROP;
+ ip->setParameter(entry, param, QString::number(aProps.value(TRANSPARENCY_PROP).toDouble()).toLatin1().data());
+ }
}
- param = occParam + ISOS_PROP;
- ip->setParameter(entry, param, aProps.value(ISOS_PROP).toString().toLatin1().data());
-
- param = occParam + VECTOR_MODE_PROP;
- ip->setParameter(entry, param, QString::number(aProps.value(VECTOR_MODE_PROP).toInt()).toLatin1().data());
+ if(aProps.contains(ISOS_PROP)) {
+ param = occParam + ISOS_PROP;
+ ip->setParameter(entry, param, aProps.value(ISOS_PROP).toString().toLatin1().data());
+ }
- param = occParam + DEFLECTION_COEFF_PROP;
- ip->setParameter(entry, param, QString::number(aProps.value(DEFLECTION_COEFF_PROP).toDouble()).toLatin1().data());
+ if(aProps.contains(VECTOR_MODE_PROP)) {
+ param = occParam + VECTOR_MODE_PROP;
+ ip->setParameter(entry, param, QString::number(aProps.value(VECTOR_MODE_PROP).toInt()).toLatin1().data());
+ }
- param = occParam + DEFLECTION_COEFF_PROP;
- ip->setParameter(entry, param, QString::number(aProps.value(DEFLECTION_COEFF_PROP).toDouble()).toLatin1().data());
+ if(aProps.contains(DEFLECTION_COEFF_PROP)) {
+ param = occParam + DEFLECTION_COEFF_PROP;
+ ip->setParameter(entry, param, QString::number(aProps.value(DEFLECTION_COEFF_PROP).toDouble()).toLatin1().data());
+ }
//Marker type of the vertex - ONLY for the "Vertex" and "Compound of the Vertex"
if(aProps.contains(MARKER_TYPE_PROP)) {
ip->setParameter(entry, param, aProps.value(MARKER_TYPE_PROP).toString().toLatin1().data());
}
+ if(aProps.contains(FRONT_MATERIAL_PROP)) {
+ param = occParam + FRONT_MATERIAL_PROP;
+ ip->setParameter(entry, param, aProps.value(FRONT_MATERIAL_PROP).toString().toLatin1().data());
+ }
+
+ if(aProps.contains(BACK_MATERIAL_PROP)) {
+ param = occParam + BACK_MATERIAL_PROP;
+ ip->setParameter(entry, param, aProps.value(BACK_MATERIAL_PROP).toString().toLatin1().data());
+
+ }
+
+ if(aProps.contains( EDGE_WIDTH_PROP )) {
+ param = occParam + EDGE_WIDTH_PROP;
+ ip->setParameter(entry, param, aProps.value(EDGE_WIDTH_PROP).toString().toLatin1().data());
+ }
+
+ if(aProps.contains( ISOS_WIDTH_PROP )) {
+ param = occParam + ISOS_WIDTH_PROP;
+ ip->setParameter(entry, param, aProps.value(ISOS_WIDTH_PROP).toString().toLatin1().data());
+ }
} // object iterator
} // for (views)
} // for (viewManagers)
}
+
/*!
* \brief Restore visual parameters
*
* This method is called after the study document is opened.
- * Restore visual parameters from AttributeParameter attribue(s)
+ * Restore visual parameters from AttributeParameter attribute(s)
*/
void GeometryGUI::restoreVisualParameters (int savePoint)
{
aListOfMap[viewIndex].insert( DEFLECTION_COEFF_PROP, val.toDouble());
} else if(paramNameStr == MARKER_TYPE_PROP) {
aListOfMap[viewIndex].insert( MARKER_TYPE_PROP, val);
+ } else if(paramNameStr == FRONT_MATERIAL_PROP) {
+ aListOfMap[viewIndex].insert( FRONT_MATERIAL_PROP, val);
+ } else if(paramNameStr == BACK_MATERIAL_PROP) {
+ aListOfMap[viewIndex].insert( BACK_MATERIAL_PROP, val);
+ } else if(paramNameStr == EDGE_WIDTH_PROP) {
+ aListOfMap[viewIndex].insert( EDGE_WIDTH_PROP , val);
+ } else if(paramNameStr == ISOS_WIDTH_PROP) {
+ aListOfMap[viewIndex].insert( ISOS_WIDTH_PROP , val);
}
+
+
} // for names/parameters iterator
QList<SUIT_ViewManager*> lst = getApp()->viewManagers();
- for (int index = 0 ; index < aListOfMap.count(); index++) {
+ for (int index = 0; index < aListOfMap.count(); index++) {
appStudy->setObjectPropMap(index, entry, aListOfMap[index]);
- QColor c = aListOfMap[index].value(COLOR_PROP).value<QColor>();
//Get Visibility property of the current PropMap
if (aListOfMap[index].value(VISIBILITY_PROP) == 1) {
SUIT_ViewManager* vman = lst.at(index);
}
}
+/*!
+ \brief Check if this object is can't be renamed in place
+
+ This method can be re-implemented in the subclasses.
+ Return true in case if object isn't reference or component (module root).
+
+ \param id column id
+ \return \c true if the item can be renamed by the user in place (e.g. in the Object browser)
+*/
+bool GeometryGUI::renameAllowed( const QString& entry) const {
+
+ SalomeApp_Application* app = dynamic_cast< SalomeApp_Application* >( SUIT_Session::session()->activeApplication() );
+ SalomeApp_Study* appStudy = app ? dynamic_cast<SalomeApp_Study*>( app->activeStudy() ) : 0;
+ SalomeApp_DataObject* obj = appStudy ? dynamic_cast<SalomeApp_DataObject*>(appStudy->findObjectByEntry(entry)) : 0;
+
+ return (app && appStudy && obj && !appStudy->isComponent(entry) && !obj->isReference());
+}
+
+
/*!
Rename object by entry.
\param entry entry of the object
*/
bool GeometryGUI::renameObject( const QString& entry, const QString& name) {
- bool appRes = SalomeApp_Module::renameObject(entry,name);
- if( !appRes )
- return false;
-
bool result = false;
SalomeApp_Application* app = dynamic_cast< SalomeApp_Application* >( SUIT_Session::session()->activeApplication());
- SalomeApp_Study* appStudy = app ? dynamic_cast<SalomeApp_Study*>( app->activeStudy() ) : 0;
-
+ SalomeApp_Study* appStudy = app ? dynamic_cast<SalomeApp_Study*>( app->activeStudy() ) : 0;
+
if(!appStudy)
return result;
-
+
_PTR(Study) aStudy = appStudy->studyDS();
-
+
if(!aStudy)
return result;
+ bool aLocked = (_PTR(AttributeStudyProperties)(appStudy->studyDS()->GetProperties()))->IsLocked();
+ if ( aLocked ) {
+ SUIT_MessageBox::warning ( app->desktop(), QObject::tr("WRN_WARNING"), QObject::tr("WRN_STUDY_LOCKED") );
+ return result;
+ }
+
_PTR(SObject) obj ( aStudy->FindObjectID(qPrintable(entry)) );
_PTR(GenericAttribute) anAttr;
if ( obj ) {
if ( obj->FindAttribute(anAttr, "AttributeName") ) {
_PTR(AttributeName) aName (anAttr);
-
+
GEOM::GEOM_Object_var anObj = GEOM::GEOM_Object::_narrow(GeometryGUI::ClientSObjectToObject(obj));
if (!CORBA::is_nil(anObj)) {
- aName->SetValue( name.toLatin1().data() ); // rename the SObject
- anObj->SetName( name.toLatin1().data() ); // Rename the corresponding GEOM_Object
- result = true;
+ aName->SetValue( name.toLatin1().data() ); // rename the SObject
+ anObj->SetName( name.toLatin1().data() ); // Rename the corresponding GEOM_Object
+ result = true;
}
}
}
return result;
}
+
