0022179: [CEA 800] Suppress common edges on two continuous faces without using Remove...

[modules/geom.git] / src / GEOMGUI / GEOM_msg_en.ts

diff --git a/src/GEOMGUI/GEOM_msg_en.ts b/src/GEOMGUI/GEOM_msg_en.ts
index cf4c13db2a3231ba6550aabf8e9230c43fea9928..b35e64ea1362e0529aa34e7af14cf3e61cb6023e 100644 (file)
--- a/src/GEOMGUI/GEOM_msg_en.ts
+++ b/src/GEOMGUI/GEOM_msg_en.ts
@@ -7,6 +7,10 @@
         <source>BRep_API: command not done</source>
         <translation>Error: can&apos;t build object</translation>
     </message>
+    <message>
+        <source>PAL_NOT_DONE_ERROR</source>
+        <translation>Operation aborted</translation>
+    </message>
     <message>
         <source>CHANGE_ORIENTATION_NEW_OBJ_NAME</source>
         <translation>Invert</translation>
@@ -109,10 +113,22 @@ Please, select face, shell or solid and try again</translation>
         <source>GEOM_ANGLE</source>
         <translation>Angle :</translation>
     </message>
+    <message>
+        <source>GEOM_ANGLES</source>
+        <translation>Angles</translation>
+    </message>
+    <message>
+        <source>GEOM_ANGLE_2</source>
+        <translation>Angle 2 :</translation>
+    </message>
     <message>
         <source>GEOM_ANGLE_1</source>
         <translation>Angle</translation>
     </message>
+    <message>
+        <source>GEOM_ANGLE_STEP</source>
+        <translation>Angular step :</translation>
+    </message>
     <message>
         <source>GEOM_ARC_ELLIPSE</source>
         <translation>Arc of ellipse</translation>
@@ -139,7 +155,7 @@ Please, select face, shell or solid and try again</translation>
     </message>
     <message>
         <source>GEOM_AXE_MIRROR</source>
-        <translation>Axe Mirror</translation>
+        <translation>Axis Mirror</translation>
     </message>
     <message>
         <source>GEOM_AXIS</source>
@@ -357,6 +373,18 @@ Please, select face, shell or solid and try again</translation>
         <source>GEOM_CHECK_BLOCKS_COMPOUND_SUBSHAPES</source>
         <translation>Incriminated Sub-shapes</translation>
     </message>
+    <message>
+        <source>GEOM_GETNONBLOCKS_TITLE</source>
+        <translation>Get non-hexahedral solids and non-quadrangular faces</translation>
+    </message>
+    <message>
+        <source>GEOM_GETNONBLOCKS</source>
+        <translation>Get non blocks</translation>
+    </message>
+    <message>
+        <source>GEOM_NONBLOCKS</source>
+        <translation>NonBlocksGroup</translation>
+    </message>
     <message>
         <source>GEOM_CHECK_INFOS</source>
         <translation>Object And Its Topological Information</translation>
@@ -411,7 +439,7 @@ Please, select face, shell or solid and try again</translation>
     </message>
     <message>
         <source>GEOM_COMMON_TITLE</source>
-        <translation>Common Of Two Objects</translation>
+        <translation>Common Of Objects</translation>
     </message>
     <message>
         <source>GEOM_COMPOUND</source>
@@ -479,7 +507,7 @@ Please, select face, shell or solid and try again</translation>
     </message>
     <message>
         <source>GEOM_CUT_TITLE</source>
-        <translation>Cut Of Two Objects</translation>
+        <translation>Cut Of Objects</translation>
     </message>
     <message>
         <source>GEOM_CYLINDER</source>
@@ -808,7 +836,7 @@ Please, select face, shell or solid and try again</translation>
     </message>
     <message>
         <source>GEOM_FUSE_TITLE</source>
-        <translation>Fuse Two Objects</translation>
+        <translation>Fuse Objects</translation>
     </message>
     <message>
         <source>GEOM_FixFaceSize</source>
@@ -1046,10 +1074,26 @@ Please, select face, shell or solid and try again</translation>
         <source>GEOM_MIN</source>
         <translation>Min :</translation>
     </message>
+    <message>
+        <source>GEOM_MINDIST_NAME</source>
+        <translation>MinDist</translation>
+    </message>
+    <message>
+        <source>GEOM_MINDIST_NO_SOL</source>
+        <translation>No solution found</translation>
+    </message>
     <message>
         <source>GEOM_MINDIST_OBJ</source>
         <translation>Objects And Results</translation>
     </message>
+    <message>
+        <source>GEOM_MINDIST_PUBLISH_TITLE</source>
+        <translation>Multiple solutions found</translation>
+    </message>
+    <message>
+        <source>GEOM_MINDIST_PUBLISH_TEXT</source>
+        <translation>Do you want to publish in the study all found solutions? If No, only the currently selected solution will be published.</translation>
+    </message>
     <message>
         <source>GEOM_MINDIST_TITLE</source>
         <translation>Minimun Distance Between Two Objects</translation>
@@ -1062,6 +1106,10 @@ Please, select face, shell or solid and try again</translation>
         <source>GEOM_MIRROR_TITLE</source>
         <translation>Mirror An Object</translation>
     </message>
+    <message>
+        <source>GEOM_MODE</source>
+        <translation>Mode</translation>
+    </message>
     <message>
         <source>GEOM_MULTIROTATION</source>
         <translation>Multi-Rotation</translation>
@@ -1170,6 +1218,14 @@ Please, select face, shell or solid and try again</translation>
         <source>GEOM_SOURCE_OBJECT</source>
         <translation>Source vertex, edge or wire</translation>
     </message>
+    <message>
+        <source>GEOM_SOLUTION</source>
+        <translation>Solution :</translation>
+    </message>
+    <message>
+        <source>GEOM_SOLUTION_I</source>
+        <translation>Solution %1</translation>
+    </message>
     <message>
         <source>GEOM_TARGET_OBJECT</source>
         <translation>Target face</translation>
@@ -1250,6 +1306,26 @@ Please, select face, shell or solid and try again</translation>
         <source>GEOM_PIPE_TITLE</source>
         <translation>Pipe Construction</translation>
     </message>
+    <message>
+        <source>GEOM_PIPE_PATH</source>
+        <translation>Path</translation>
+    </message>
+    <message>
+        <source>GEOM_PIPE_PATH_TITLE</source>
+        <translation>Restore Path</translation>
+    </message>
+    <message>
+        <source>GEOM_PIPE_LIKE_SHAPE</source>
+        <translation>Pipe-like shell or solid</translation>
+    </message>
+    <message>
+        <source>GEOM_PIPE_BASE1_OBJECT</source>
+        <translation>First base face/wire/edges</translation>
+    </message>
+    <message>
+        <source>GEOM_PIPE_BASE2_OBJECT</source>
+        <translation>Last base face/wire/edges</translation>
+    </message>
     <message>
         <source>GEOM_PROFILE</source>
         <translation>Profile</translation>
@@ -1622,6 +1698,18 @@ Please, select face, shell or solid and try again</translation>
         <source>GEOM_SHELL_TITLE</source>
         <translation>Shell Construction</translation>
     </message>
+    <message>
+        <source>GEOM_SHOW_LENGTH</source>
+        <translation>Show length dimensions</translation>
+    </message>
+    <message>
+        <source>GEOM_SHOW_ANGLE</source>
+        <translation>Show angle dimensions</translation>
+    </message>
+    <message>
+        <source>GEOM_SHOW_POINTS_COORD</source>
+        <translation>Show start/end point coordinates</translation>
+    </message>
     <message>
         <source>GEOM_SKETCH</source>
         <translation>Sketch</translation>
@@ -1830,6 +1918,10 @@ Please, select face, shell or solid and try again</translation>
         <source>GEOM_COORDINATES_TYPE</source>
         <translation>Coordinates Type</translation>
     </message>
+    <message>
+        <source>GEOM_CONTROLS</source>
+        <translation>Controls</translation>
+    </message>
     <message>
         <source>GEOM_SOLID</source>
         <translation>Solid</translation>
@@ -1866,6 +1958,14 @@ Please, select face, shell or solid and try again</translation>
         <source>GEOM_SQUARE</source>
         <translation>Square</translation>
     </message>
+    <message>
+        <source>GEOM_START</source>
+        <translation>Start :</translation>
+    </message>
+    <message>
+        <source>GEOM_END</source>
+        <translation>End :</translation>
+    </message>
     <message>
         <source>GEOM_START_LCS</source>
         <translation>Start LCS</translation>
@@ -1878,6 +1978,10 @@ Please, select face, shell or solid and try again</translation>
         <source>GEOM_STEP</source>
         <translation>Step :</translation>
     </message>
+    <message>
+        <source>GEOM_STEP_R</source>
+        <translation>Radial step :</translation>
+    </message>
     <message>
         <source>GEOM_STEP_TITLE</source>
         <translation>Step value for GUI constructions</translation>
@@ -2002,6 +2106,10 @@ Please, select face, shell or solid and try again</translation>
         <source>GEOM_SplitContinuity</source>
         <translation>SplitContinuity</translation>
     </message>
+    <message>
+        <source>GEOM_THICKNESS</source>
+        <translation>Thickness</translation>
+    </message>
     <message>
         <source>GEOM_TOLERANCE</source>
         <translation>Tolerance</translation>
@@ -2034,10 +2142,6 @@ Please, select face, shell or solid and try again</translation>
         <source>GEOM_TOLERANCE_VERTEX</source>
         <translation>Vertex :</translation>
     </message>
-    <message>
-        <source>GEOM_TOOL_OBJECT</source>
-        <translation>Tool Object</translation>
-    </message>
     <message>
         <source>GEOM_TOOL_OBJECTS</source>
         <translation>Tool Objects</translation>
@@ -2310,6 +2414,10 @@ Please, select face, shell or solid and try again</translation>
         <source>MEN_CHECK_COMPOUND</source>
         <translation>Check Compound of Blocks</translation>
     </message>
+    <message>
+        <source>MEN_GET_NON_BLOCKS</source>
+        <translation>Get Non Blocks</translation>
+    </message>
     <message>
         <source>MEN_CHECK_SELF_INTERSECTIONS</source>
         <translation>Detect Self-intersections</translation>
@@ -2422,6 +2530,10 @@ Please, select face, shell or solid and try again</translation>
         <source>MEN_DISPLAY_ONLY</source>
         <translation>Show Only</translation>
     </message>
+    <message>
+        <source>MEN_SHOW_ONLY_CHILDREN</source>
+        <translation>Show Only Children</translation>
+    </message>
     <message>
         <source>MEN_BRING_TO_FRONT</source>
         <translation>Bring To Front</translation>
@@ -2550,6 +2662,18 @@ Please, select face, shell or solid and try again</translation>
         <source>MEN_GROUP_EDIT</source>
         <translation>Edit</translation>
     </message>
+    <message>
+        <source>MEN_GROUP_UNION</source>
+        <translation>Union Groups</translation>
+    </message>
+    <message>
+        <source>MEN_GROUP_INTERSECT</source>
+        <translation>Intersect Groups</translation>
+    </message>
+    <message>
+        <source>MEN_GROUP_CUT</source>
+        <translation>Cut Groups</translation>
+    </message>
     <message>
         <source>MEN_RELOAD_IMPORTED</source>
         <translation>Reload From Disk</translation>
@@ -2642,6 +2766,10 @@ Please, select face, shell or solid and try again</translation>
         <source>MEN_PIPE</source>
         <translation>Extrusion Along Path</translation>
     </message>
+    <message>
+        <source>MEN_PIPE_PATH</source>
+        <translation>Restore Path</translation>
+    </message>
     <message>
         <source>MEN_PLANE</source>
         <translation>Plane</translation>
@@ -2667,12 +2795,12 @@ Please, select face, shell or solid and try again</translation>
         <translation>Create Group</translation>
     </message>
     <message>
-        <source>MEN_POP_SHOW_CHILDREN</source>
-        <translation>Show Children</translation>
+        <source>MEN_POP_DISCLOSE_CHILDREN</source>
+        <translation>Disclose child items</translation>
     </message>
     <message>
-        <source>MEN_POP_HIDE_CHILDREN</source>
-        <translation>Hide Children</translation>
+        <source>MEN_POP_CONCEAL_CHILDREN</source>
+        <translation>Conceal child items</translation>
     </message>
     <message>
         <source>MEN_POP_UNPUBLISH_OBJ</source>
@@ -2870,6 +2998,10 @@ Please, select face, shell or solid and try again</translation>
         <source>MEN_TOOLS</source>
         <translation>Tools</translation>
     </message>
+    <message>
+        <source>MEN_MATERIALS_LIBRARY</source>
+        <translation>Materials library</translation>
+    </message>
     <message>
         <source>MEN_TORUS</source>
         <translation>Torus</translation>
@@ -2930,6 +3062,10 @@ Please, select face, shell or solid and try again</translation>
         <source>MEN_POP_MATERIAL_PROPERTIES</source>
         <translation>Material Properties</translation>
     </message>
+    <message>
+        <source>MEN_POP_PREDEF_MATER_CUSTOM</source>
+        <translation>Custom...</translation>
+    </message>
     <message>
         <source>NAME_LBL</source>
         <translation>Name: </translation>
@@ -3074,6 +3210,14 @@ Please, select face, shell or solid and try again</translation>
         <source>PREF_MATERIAL</source>
         <translation>Default material</translation>
     </message>
+    <message>
+        <source>PREF_PREDEF_MATERIALS</source>
+        <translation>Show predefined materials in popup menu</translation>
+    </message>
+    <message>
+        <source>PREF_EDITGROUP_COLOR</source>
+        <translation>Subshapes color for editing a group</translation>
+    </message>
     <message>
         <source>PREF_EDGE_WIDTH</source>
         <translation>Edges width</translation>
@@ -3090,10 +3234,26 @@ Please, select face, shell or solid and try again</translation>
         <source>PREF_MEASURES_LINE_WIDTH</source>
         <translation>Measures lines width</translation>
     </message>
+    <message>
+        <source>PREF_ISOS</source>
+        <translation>Number of isolines</translation>
+    </message>
+    <message>
+        <source>PREF_ISOS_U</source>
+        <translation>Along U</translation>
+    </message>
+    <message>
+        <source>PREF_ISOS_V</source>
+        <translation>Along V</translation>
+    </message>
     <message>
         <source>PROCESS_SHAPE_NEW_OBJ_NAME</source>
         <translation>ProcessShape</translation>
     </message>
+    <message>
+        <source>MATERIAL_LIBRARY_TLT</source>
+        <translation>Materials Library</translation>
+    </message>
     <message>
         <source>REMOVE_HOLES_NEW_OBJ_NAME</source>
         <translation>SupressHoles</translation>
@@ -3154,6 +3314,10 @@ Please, select face, shell or solid and try again</translation>
         <source>STB_CHECK_COMPOUND</source>
         <translation>Check compound of blocks</translation>
     </message>
+    <message>
+        <source>STB_GET_NON_BLOCKS</source>
+        <translation>Get non blocks</translation>
+    </message>
     <message>
         <source>STB_CHECK_SELF_INTERSECTIONS</source>
         <translation>Detect Self-intersections</translation>
@@ -3234,6 +3398,10 @@ Please, select face, shell or solid and try again</translation>
         <source>STB_DISPLAY_ONLY</source>
         <translation>Show only</translation>
     </message>
+    <message>
+        <source>STB_SHOW_ONLY_CHILDREN</source>
+        <translation>Show Only Children</translation>
+    </message>
     <message>
         <source>STB_EDGE</source>
         <translation>Build an edge</translation>
@@ -3322,6 +3490,18 @@ Please, select face, shell or solid and try again</translation>
         <source>STB_GROUP_EDIT</source>
         <translation>Edit a group</translation>
     </message>
+    <message>
+        <source>STB_GROUP_UNION</source>
+        <translation>Union Groups</translation>
+    </message>
+    <message>
+        <source>STB_GROUP_INTERSECT</source>
+        <translation>Intersect Groups</translation>
+    </message>
+    <message>
+        <source>STB_GROUP_CUT</source>
+        <translation>Cut Groups</translation>
+    </message>
     <message>
         <source>STB_RELOAD_IMPORTED</source>
         <translation>Reload imported shape from its original place on disk</translation>
@@ -3402,6 +3582,10 @@ Please, select face, shell or solid and try again</translation>
         <source>STB_PIPE</source>
         <translation>Create a shape by extrusion along a path</translation>
     </message>
+    <message>
+        <source>STB_PIPE_PATH</source>
+        <translation>Restore path from a pipe-like shape</translation>
+    </message>
     <message>
         <source>STB_PLANE</source>
         <translation>Create a plane</translation>
@@ -3426,10 +3610,6 @@ Please, select face, shell or solid and try again</translation>
         <source>STB_POP_CREATE_GROUP</source>
         <translation>Create Group</translation>
     </message>
-    <message>
-        <source>STB_POP_SHOW_CHILDREN</source>
-        <translation>Show child objects</translation>
-    </message>
     <message>
         <source>STB_POP_UNPUBLISH_OBJ</source>
         <translation>Unpublish object</translation>
@@ -3439,8 +3619,12 @@ Please, select face, shell or solid and try again</translation>
         <translation>Publish object</translation>
     </message>
     <message>
-        <source>STB_POP_HIDE_CHILDREN</source>
-        <translation>Hide child objects</translation>
+        <source>STB_POP_DISCLOSE_CHILDREN</source>
+        <translation>Disclose child items</translation>
+    </message>
+    <message>
+        <source>STB_POP_CONCEAL_CHILDREN</source>
+        <translation>Conceal child items</translation>
     </message>
     <message>
         <source>STB_POP_ISOS</source>
@@ -3482,6 +3666,14 @@ Please, select face, shell or solid and try again</translation>
         <source>STB_POP_WIREFRAME</source>
         <translation>Wireframe</translation>
     </message>
+    <message>
+        <source>STB_MATERIALS_LIBRARY</source>
+        <translation>Displays content of Materials library</translation>
+    </message>
+    <message>
+        <source>STB_POP_PREDEF_MATER_CUSTOM</source>
+        <translation>Custom...</translation>
+    </message>
     <message>
         <source>STB_PROPAGATE</source>
         <translation>Propagate</translation>
@@ -3686,6 +3878,10 @@ Please, select face, shell or solid and try again</translation>
         <source>TOOL_BASIC</source>
         <translation>Basic</translation>
     </message>
+    <message>
+        <source>TOOL_BLOCKS</source>
+        <translation>Blocks</translation>
+    </message>
     <message>
         <source>TOOL_BOOLEAN</source>
         <translation>Boolean operations</translation>
@@ -3762,6 +3958,10 @@ Please, select face, shell or solid and try again</translation>
         <source>TOP_CHECK_COMPOUND</source>
         <translation>Check compound of blocks</translation>
     </message>
+    <message>
+        <source>TOP_GET_NON_BLOCKS</source>
+        <translation>Get non blocks</translation>
+    </message>
     <message>
         <source>TOP_CHECK_SELF_INTERSECTIONS</source>
         <translation>Detect Self-intersections</translation>
@@ -3838,6 +4038,10 @@ Please, select face, shell or solid and try again</translation>
         <source>TOP_DISPLAY_ONLY</source>
         <translation>Show only</translation>
     </message>
+    <message>
+        <source>TOP_SHOW_ONLY_CHILDREN</source>
+        <translation>Show Only Children</translation>
+    </message>
     <message>
         <source>TOP_EDGE</source>
         <translation>Build edge</translation>
@@ -3918,6 +4122,18 @@ Please, select face, shell or solid and try again</translation>
         <source>TOP_GROUP_EDIT</source>
         <translation>Edit a group</translation>
     </message>
+    <message>
+        <source>TOP_GROUP_UNION</source>
+        <translation>Union Groups</translation>
+    </message>
+    <message>
+        <source>TOP_GROUP_INTERSECT</source>
+        <translation>Intersect Groups</translation>
+    </message>
+    <message>
+        <source>TOP_GROUP_CUT</source>
+        <translation>Cut Groups</translation>
+    </message>
     <message>
         <source>TOP_HEX_SOLID</source>
         <translation>Hexahedral Solid</translation>
@@ -4002,6 +4218,10 @@ Please, select face, shell or solid and try again</translation>
         <source>TOP_PIPE</source>
         <translation>Extrusion along path</translation>
     </message>
+    <message>
+        <source>TOP_PIPE_PATH</source>
+        <translation>Restore path</translation>
+    </message>
     <message>
         <source>TOP_PLANE</source>
         <translation>Create a plane</translation>
@@ -4026,10 +4246,6 @@ Please, select face, shell or solid and try again</translation>
         <source>TOP_POP_CREATE_GROUP</source>
         <translation>Create Group</translation>
     </message>
-    <message>
-        <source>TOP_POP_SHOW_CHILDREN</source>
-        <translation>Show Children</translation>
-    </message>
     <message>
         <source>TOP_POP_UNPUBLISH_OBJ</source>
         <translation>Unpublish object</translation>
@@ -4039,8 +4255,12 @@ Please, select face, shell or solid and try again</translation>
         <translation>Publish object</translation>
     </message>
     <message>
-        <source>TOP_POP_HIDE_CHILDREN</source>
-        <translation>Hide Children</translation>
+        <source>TOP_POP_DISCLOSE_CHILDREN</source>
+        <translation>Disclose child items</translation>
+    </message>
+    <message>
+        <source>TOP_POP_CONCEAL_CHILDREN</source>
+        <translation>Conceal child items</translation>
     </message>
     <message>
         <source>TOP_POP_ISOS</source>
@@ -4334,6 +4554,30 @@ Please, select face, shell or solid and try again</translation>
         <source>STB_FUSE_EDGES</source>
         <translation>Fuse collinear edges within a wire</translation>
     </message>
+    <message>
+        <source>GEOM_UNION_FACES_TITLE</source>
+        <translation>Union faces</translation>
+    </message>
+    <message>
+        <source>GEOM_UNION_FACES</source>
+        <translation>Object to unite faces</translation>
+    </message>
+    <message>
+        <source>UNION_FACES_NEW_OBJ_NAME</source>
+        <translation>UnionFaces</translation>
+    </message>
+    <message>
+        <source>TOP_UNION_FACES</source>
+        <translation>Union faces</translation>
+    </message>
+    <message>
+        <source>MEN_UNION_FACES</source>
+        <translation>Union Faces</translation>
+    </message>
+    <message>
+        <source>STB_UNION_FACES</source>
+        <translation>Union faces</translation>
+    </message>
     <message>
         <source>TOP_NORMALE</source>
         <translation>Normal to a face</translation>
@@ -4607,8 +4851,8 @@ shells and solids on the other hand.</translation>
     </message>
     <message>
         <source>GEOM_SCALE_DIMENSIONS</source>
-        <translation>Would you like to take into account the units?
-Otherwise the dimensions will be kept without modifications.</translation>
+        <translation>Take into account the units (%1) embedded to the file?
+Ignoring units will cause model scaling (as dimensions are supposed to be specified in meters).</translation>
     </message>
     <message>
         <source>GEOM_ADVANCED</source>
@@ -4687,6 +4931,10 @@ Otherwise the dimensions will be kept without modifications.</translation>
         <source>JUNCTION_FACE_3</source>
         <translation>Junction 3</translation>
     </message>
+    <message>
+        <source>INTERNAL_FACES</source>
+        <translation>Internal faces</translation>
+    </message>
     <message>
         <source>GEOM_PLUGINS_OTHER</source>
         <translation>Other</translation>
@@ -4722,6 +4970,22 @@ Otherwise the dimensions will be kept without modifications.</translation>
         <source>GEOM_IS_REORDER</source>
         <translation>Reorder vertices taking into account distances</translation>
     </message>
+    <message>
+        <source>GEOM_INTERPOL_TANGENTS</source>
+        <translation>Tangents</translation>
+    </message>
+    <message>
+        <source>GEOM_INTERPOL_FIRST_VEC</source>
+        <translation>First tangent vector</translation>
+    </message>
+    <message>
+        <source>GEOM_INTERPOL_LAST_VEC</source>
+        <translation>Last tangent vector</translation>
+    </message>
+    <message>
+        <source>GEOM_BOTH_TANGENTS_REQUIRED</source>
+        <translation>Both tangent vectors must be defined</translation>
+    </message>
     <message>
         <source>GEOM_CURVE_CRMODE</source>
         <translation>Creation Mode</translation>
@@ -5030,6 +5294,21 @@ Number of sketch points too small</translation>
         <translation>Please, select one or more sub-shapes</translation>
     </message>
 </context>
+<context>
+    <name>GenerationGUI_PrismDlg</name>
+    <message>
+        <source>GEOM_THICKENING</source>
+        <translation>Thickening</translation>
+    </message>
+    <message>
+        <source>GEOM_ADD_THICKNESS</source>
+        <translation>Add thickness (edges or wires only)</translation>
+    </message>
+    <message>
+        <source>GEOM_TOWARDS_INSIDE</source>
+        <translation>Thicken towards the inside</translation>
+    </message>
+</context>
 <context>
     <name>GroupGUI</name>
     <message>
@@ -5037,6 +5316,45 @@ Number of sketch points too small</translation>
         <translation>Please, select a group to edit</translation>
     </message>
 </context>
+<context>
+    <name>GroupGUI_BooleanDlg</name>
+    <message>
+        <source>GEOM_UNION</source>
+        <translation>Union</translation>
+    </message>
+    <message>
+        <source>GEOM_UNION_TITLE</source>
+        <translation>Union Groups</translation>
+    </message>
+    <message>
+        <source>GEOM_INTERSECT</source>
+        <translation>Intersect</translation>
+    </message>
+    <message>
+        <source>GEOM_INTERSECT_TITLE</source>
+        <translation>Intersect Groups</translation>
+    </message>
+    <message>
+        <source>GEOM_CUT</source>
+        <translation>Cut</translation>
+    </message>
+    <message>
+        <source>GEOM_CUT_TITLE</source>
+        <translation>Cut Groups</translation>
+    </message>
+    <message>
+        <source>GEOM_GROUPS</source>
+        <translation>Groups</translation>
+    </message>
+    <message>
+        <source>GEOM_MAIN_GROUPS</source>
+        <translation>Main Groups</translation>
+    </message>
+    <message>
+        <source>GEOM_TOOL_GROUPS</source>
+        <translation>Tool Groups</translation>
+    </message>
+</context>
 <context>
     <name>GroupGUI_GroupDlg</name>
     <message>
@@ -5198,6 +5516,14 @@ Number of sketch points too small</translation>
         <source>NUMBER_OPEN</source>
         <translation>Number of open free boundaries: </translation>
     </message>
+    <message>
+        <source>NAME_CLOSED</source>
+        <translation>Closed_Free_Boundary_%1</translation>
+    </message>
+    <message>
+        <source>NAME_OPEN</source>
+        <translation>Open_Free_Boundary_%1</translation>
+    </message>
 </context>
 <context>
     <name>RepairGUI_GlueDlg</name>
@@ -5342,6 +5668,14 @@ Would you like to continue?</translation>
         <source>MATERIAL_PROPERTIES_TLT</source>
         <translation>Color and Material Properties</translation>
     </message>
+    <message>
+        <source>FRONT_FACE</source>
+        <translation>Front face</translation>
+    </message>
+    <message>
+        <source>BACK_FACE</source>
+        <translation>Back face</translation>
+    </message>
     <message>
         <source>REFLECTION_0</source>
         <translation>Ambient</translation>
@@ -5358,10 +5692,6 @@ Would you like to continue?</translation>
         <source>REFLECTION_3</source>
         <translation>Emissive</translation>
     </message>
-    <message>
-        <source>ENABLED</source>
-        <translation>Enabled</translation>
-    </message>
     <message>
         <source>SHININESS</source>
         <translation>Shininess:</translation>
@@ -5513,6 +5843,46 @@ Do you want to create new material?</translation>
         <source>GEOM_PIPE_TSHAPE_POSITION_LBL_L2</source>
         <translation>New L2</translation>
     </message>
+    <message>
+        <source>GEOM_PIPE_TSHAPE_LEFT_TR</source>
+        <translation>Left thickness reduction</translation>
+    </message>
+    <message>
+        <source>GEOM_PIPE_TSHAPE_RIGHT_TR</source>
+        <translation>Right thickness reduction</translation>
+    </message>
+    <message>
+        <source>GEOM_PIPE_TSHAPE_INCI_TR</source>
+        <translation>Incident pipe thickness reduction</translation>
+    </message>
+    <message>
+        <source>GEOM_PIPE_TSHAPE_TR_R</source>
+        <translation>Radius (r%1)</translation>
+    </message>
+    <message>
+        <source>GEOM_PIPE_TSHAPE_TR_W</source>
+        <translation>Width (w%1)</translation>
+    </message>
+    <message>
+        <source>GEOM_PIPE_TSHAPE_TR_L_TRANS</source>
+        <translation>Transition length (ltrans%1)</translation>
+    </message>
+    <message>
+        <source>GEOM_PIPE_TSHAPE_TR_L_THIN</source>
+        <translation>Thin part length (lthin%1)</translation>
+    </message>
+    <message>
+        <source>GEOM_PIPETSHAPE_GROUPMAIN</source>
+        <translation>Main parameters</translation>
+    </message>
+    <message>
+        <source>GEOM_PIPETSHAPE_GROUPREDUCT</source>
+        <translation>Thickness reduction</translation>
+    </message>
+    <message>
+        <source>GEOM_PIPETSHAPE_GROUPPOS</source>
+        <translation>Position</translation>
+    </message>
 </context>
 <context>
     <name>GEOMToolsGUI_PublishDlg</name>