<!DOCTYPE TS>
<!--
- Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE
+ Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE
Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
<TS version="1.1" >
<context>
<name>@default</name>
+ <message>
+ <source>BRep_API: command not done</source>
+ <translation>Error: can't build object</translation>
+ </message>
<message>
<source>CHANGE_ORIENTATION_NEW_OBJ_NAME</source>
<translation>Invert</translation>
<source>GEOM_ANGLE_1</source>
<translation>Angle</translation>
</message>
+ <message>
+ <source>GEOM_ARC_ELLIPSE</source>
+ <translation>Arc of ellipse</translation>
+ </message>
<message>
<source>GEOM_ARC</source>
<translation>Arc</translation>
<source>GEOM_CHECK_BLOCKS_COMPOUND</source>
<translation>Check and Improve Blocks Compound</translation>
</message>
+ <message>
+ <source>GEOM_CHECK_BLOCKS_COMPOUND_FAILED</source>
+ <translation>Check failed</translation>
+ </message>
<message>
<source>GEOM_CHECK_BLOCKS_COMPOUND_ERRORS</source>
<translation>Errors</translation>
<source>GEOM_COORDINATES</source>
<translation>Coordinates</translation>
</message>
+ <message>
+ <source>GEOM_COORDINATES_RES</source>
+ <translation>Result coordinates</translation>
+ </message>
<message>
<source>GEOM_CREATE_COPY</source>
<translation>Create a copy</translation>
</message>
<message>
<source>GEOM_DISK_TITLE</source>
- <translation>Create A Disk</translation>
+ <translation>Disk Construction</translation>
</message>
<message>
<source>GEOM_DIMENSIONS</source>
<translation>Create A Face</translation>
</message>
<message>
- <source>GEOM_FILLET</source>
+ <source>GEOM_RECTANGLE_TITLE</source>
+ <translation>Rectangle Construction</translation>
+ </message>
+ <message>
+ <source>GEOM_RECTANGLE</source>
+ <translation>Rectangle</translation>
+ </message>
+ <message>
+ <source>GEOM_FILLET</source>
<translation>Fillet</translation>
</message>
<message>
<source>GEOM_FILLET_2D</source>
<translation>Fillet 2D</translation>
</message>
+ <message>
+ <source>GEOM_FILLET_1D</source>
+ <translation>Fillet 1D</translation>
+ </message>
<message>
<source>GEOM_FILLET_ABORT</source>
<translation>Fillet can't be computed with radius %1</translation>
<source>GEOM_FILLET_EDGES</source>
<translation>Fillet On Edges From Shape</translation>
</message>
+ <message>
+ <source>GEOM_FILLET_WIRES</source>
+ <translation>Fillet On Wires From Shape</translation>
+ </message>
<message>
<source>GEOM_FILLET_FACES</source>
<translation>Fillet On Faces From Shape</translation>
<source>GEOM_FILLET_2D_TITLE</source>
<translation>2D Fillet Construction</translation>
</message>
+ <message>
+ <source>GEOM_FILLET_1D_TITLE</source>
+ <translation>1D Fillet Construction</translation>
+ </message>
<message>
<source>GEOM_FILLING</source>
<translation>Filling</translation>
</message>
<message>
<source>GEOM_FILLING_COMPOUND</source>
- <translation>Edges compound</translation>
+ <translation>Input compound</translation>
</message>
<message>
<source>GEOM_FILLING_MAX_DEG</source>
<translation>Parameters</translation>
</message>
<message>
- <source>GEOM_PARAM_POINT</source>
- <translation>Parametric point</translation>
+ <source>GEOM_POINT_ON_EDGE</source>
+ <translation>Point on Edge</translation>
+ </message>
+ <message>
+ <source>GEOM_POINT_ON_FACE</source>
+ <translation>Point on Face</translation>
+ </message>
+ <message>
+ <source>GEOM_PARAM_VALUE</source>
+ <translation>By parameter</translation>
+ </message>
+ <message>
+ <source>GEOM_COORD_VALUE</source>
+ <translation>By coordinate</translation>
</message>
<message>
<source>GEOM_PARTITION</source>
<source>GEOM_PIPE_TITLE</source>
<translation>Pipe Construction</translation>
</message>
+ <message>
+ <source>GEOM_SEGMENT</source>
+ <translation>Segment of straight line</translation>
+ </message>
<message>
<source>GEOM_SELECT_UNPUBLISHED_EDGES</source>
<translation>Select unpublished edges</translation>
</message>
<message>
<source>GEOM_SKETCHER_TITLE</source>
- <translation>Sketch Construction</translation>
+ <translation>2D Sketch Construction</translation>
</message>
<message>
<source>GEOM_3DSKETCHER_TITLE</source>
<source>GEOM_TOOL_OBJECT</source>
<translation>Tool Object</translation>
</message>
+ <message>
+ <source>GEOM_TOOL_OBJECTS</source>
+ <translation>Tool Objects</translation>
+ </message>
<message>
<source>GEOM_TORUS</source>
<translation>Torus</translation>
</message>
<message>
<source>MEN_CHECK</source>
- <translation>Check</translation>
+ <translation>Check Shape</translation>
</message>
<message>
<source>MEN_CHECK_COMPOUND</source>
<source>MEN_CYLINDER</source>
<translation>Cylinder</translation>
</message>
+ <message>
+ <source>MEN_RECTANGLE</source>
+ <translation>Rectangle</translation>
+ </message>
<message>
<source>MEN_DELETE</source>
<translation>Delete</translation>
</message>
<message>
<source>MEN_FILLET</source>
- <translation>Fillet</translation>
+ <translation>Fillet 3D</translation>
+ </message>
+ <message>
+ <source>MEN_FILLET_1D</source>
+ <translation>Fillet 1D</translation>
</message>
<message>
<source>MEN_FILLET_2D</source>
</message>
<message>
<source>MEN_MODIFY_LOCATION</source>
- <translation>Modify the Location</translation>
+ <translation>Modify Location</translation>
</message>
<message>
<source>MEN_MUL_ROTATION</source>
</message>
<message>
<source>MEN_PIPE</source>
- <translation>Extrusion Along a Path</translation>
+ <translation>Extrusion Along Path</translation>
</message>
<message>
<source>MEN_PLANE</source>
<source>MEN_POP_CREATE_GROUP</source>
<translation>Create Group</translation>
</message>
+ <message>
+ <source>MEN_POP_SHOW_CHILDREN</source>
+ <translation>Show Children</translation>
+ </message>
+ <message>
+ <source>MEN_POP_HIDE_CHILDREN</source>
+ <translation>Hide Children</translation>
+ </message>
<message>
<source>MEN_POP_ISOS</source>
<translation>Isos</translation>
</message>
+ <message>
+ <source>MEN_POP_DEFLECTION</source>
+ <translation>Deflection Coefficient</translation>
+ </message>
<message>
<source>MEN_POP_RENAME</source>
<translation>Rename</translation>
<source>MEN_POP_WIREFRAME</source>
<translation>Wireframe</translation>
</message>
+ <message>
+ <source>MEN_POP_VECTORS</source>
+ <translation>Show Edge Direction</translation>
+ </message>
<message>
<source>MEN_PREFERENCES</source>
<translation>Preferences</translation>
<source>MEN_PRIMITIVES</source>
<translation>Primitives</translation>
</message>
+ <message>
+ <source>MEN_ADVANCED</source>
+ <translation>Advanced</translation>
+ </message>
<message>
<source>MEN_PROPAGATE</source>
<translation>Propagate</translation>
</message>
<message>
<source>MEN_SKETCH</source>
- <translation>Sketch</translation>
+ <translation>2D Sketch</translation>
</message>
<message>
<source>MEN_3DSKETCH</source>
</message>
<message>
<source>MEN_TOLERANCE</source>
- <translation>Compute Tolerance</translation>
+ <translation>Tolerance</translation>
</message>
<message>
<source>MEN_TOOLS</source>
<translation>Wire</translation>
</message>
<message>
+ <source>MEN_VECTOR_MODE_ON</source>
+ <translation>Show Edge Direction</translation>
+ </message>
+ <message>
+ <source>MEN_VECTOR_MODE_OFF</source>
+ <translation>Hide Edge Direction</translation>
+ </message>
+ <message>
<source>MEN_WIREFRAME</source>
<translation>Wireframe</translation>
</message>
<source>MEN_WORK_PLANE</source>
<translation>Working Plane</translation>
</message>
+ <message>
+ <source>MEN_POP_POINT_MARKER</source>
+ <translation>Point Marker</translation>
+ </message>
<message>
<source>NAME_LBL</source>
<translation>Name: </translation>
<source>NON_GEOM_OBJECTS_SELECTED</source>
<translation>There are objects selected which do not belong to %1 component.</translation>
</message>
+ <message>
+ <source>PREF_DEFLECTION</source>
+ <translation>Deflection coefficient</translation>
+ </message>
+ <message>
+ <source>GEOM_PREF_def_precision</source>
+ <translation>Default precision</translation>
+ </message>
+ <message>
+ <source>GEOM_PREF_length_precision</source>
+ <translation>Length precision</translation>
+ </message>
+ <message>
+ <source>GEOM_PREF_angle_precision</source>
+ <translation>Angular precision</translation>
+ </message>
+ <message>
+ <source>GEOM_PREF_len_tol_precision</source>
+ <translation>Length tolerance precision</translation>
+ </message>
+ <message>
+ <source>GEOM_PREF_ang_tol_precision</source>
+ <translation>Angular tolerance precision</translation>
+ </message>
+ <message>
+ <source>GEOM_PREF_weight_precision</source>
+ <translation>Weight precision</translation>
+ </message>
+ <message>
+ <source>GEOM_PREF_density_precision</source>
+ <translation>Density precision</translation>
+ </message>
+ <message>
+ <source>GEOM_PREF_parametric_precision</source>
+ <translation>Parametric precision</translation>
+ </message>
+ <message>
+ <source>GEOM_PREF_param_tol_precision</source>
+ <translation>Parametric tolerance precision</translation>
+ </message>
<message>
<source>PREF_DISPLAY_MODE</source>
<translation>Default display mode</translation>
<source>PREF_GROUP_OCCVIEWER</source>
<translation>OCC Viewer 3d</translation>
</message>
+ <message>
+ <source>GEOM_PREF_GROUP_PRECISION</source>
+ <translation>Input fields precision</translation>
+ </message>
<message>
<source>PREF_GROUP_VERTEX</source>
<translation>Marker of Points</translation>
</message>
<message>
<source>STB_ARCHIMEDE</source>
- <translation>Archimede</translation>
+ <translation>Archimede operation</translation>
</message>
<message>
<source>STB_BASIC_PROPS</source>
- <translation>Basic properties</translation>
+ <translation>Show basic properties of the shape</translation>
</message>
<message>
<source>STB_BND_BOX</source>
- <translation>Compute bounding box</translation>
+ <translation>Compute bounding box of the shape</translation>
</message>
<message>
<source>STB_BOX</source>
</message>
<message>
<source>STB_CHAMFER</source>
- <translation>Chamfer</translation>
+ <translation>Create a chamfer</translation>
</message>
<message>
<source>STB_CHANGE_ORIENTATION</source>
</message>
<message>
<source>STB_CHECK</source>
- <translation>Check</translation>
+ <translation>Check shape validity</translation>
</message>
<message>
<source>STB_CHECK_COMPOUND</source>
<source>STB_CYLINDER</source>
<translation>Create a cylinder</translation>
</message>
+ <message>
+ <source>STB_RECTANGLE</source>
+ <translation>Create rectangular face</translation>
+ </message>
<message>
<source>STB_DELETE</source>
<translation>Delete object</translation>
</message>
<message>
<source>STB_FILLET</source>
- <translation>Fillet</translation>
+ <translation>Create 3D fillet</translation>
+ </message>
+ <message>
+ <source>STB_FILLET_1D</source>
+ <translation>Create 1D fillet</translation>
+ </message>
+ <message>
+ <source>STB_FILLET_2D</source>
+ <translation>Create 2D fillet</translation>
</message>
<message>
<source>STB_FILLING</source>
</message>
<message>
<source>STB_INERTIA</source>
- <translation>Compute intertia</translation>
+ <translation>Compute moments of intertia of the shape</translation>
</message>
<message>
<source>STB_ISOS</source>
</message>
<message>
<source>STB_MASS_CENTER</source>
- <translation>Compute center of mass</translation>
+ <translation>Compute center of mass of the shape</translation>
</message>
<message>
<source>STB_MIN_DIST</source>
- <translation>Compute minimum distance</translation>
+ <translation>Compute minimum distance between two objects</translation>
</message>
<message>
<source>STB_MIRROR</source>
- <translation>Mirror image</translation>
+ <translation>Mirror a shape</translation>
</message>
<message>
<source>STB_MODIFY_LOCATION</source>
- <translation>Modify the Location</translation>
+ <translation>Modify shape's location</translation>
</message>
<message>
<source>STB_MUL_ROTATION</source>
- <translation>Multi-Rotation</translation>
+ <translation>Perform multi-rotation</translation>
</message>
<message>
<source>STB_MUL_TRANSFORM</source>
- <translation>Multi-transformation</translation>
+ <translation>Perform multi-transformation</translation>
</message>
<message>
<source>STB_MUL_TRANSLATION</source>
- <translation>Multi-Translation</translation>
+ <translation>Perform multi-translation</translation>
</message>
<message>
<source>STB_OFFSET</source>
</message>
<message>
<source>STB_PARTITION</source>
- <translation>Partition</translation>
+ <translation>Make a partition</translation>
</message>
<message>
<source>STB_PIPE</source>
- <translation>Create a shape by Extrusion along a path</translation>
+ <translation>Create a shape by extrusion along a path</translation>
</message>
<message>
<source>STB_PLANE</source>
</message>
<message>
<source>STB_POINT_COORDS</source>
- <translation>Point coordinates</translation>
+ <translation>Display point coordinates</translation>
</message>
<message>
<source>STB_POINT_ON_EDGE</source>
<source>STB_POP_CREATE_GROUP</source>
<translation>Create Group</translation>
</message>
+ <message>
+ <source>STB_POP_SHOW_CHILDREN</source>
+ <translation>Show child objects</translation>
+ </message>
+ <message>
+ <source>STB_POP_HIDE_CHILDREN</source>
+ <translation>Hide child objects</translation>
+ </message>
<message>
<source>STB_POP_ISOS</source>
<translation>Isolines</translation>
</message>
+ <message>
+ <source>STB_POP_DEFLECTION</source>
+ <translation>Deflection Coefficient</translation>
+ </message>
<message>
<source>STB_POP_RENAME</source>
<translation>Rename</translation>
</message>
<message>
<source>STB_ROTATION</source>
- <translation>Rotation</translation>
+ <translation>Rotate a shape</translation>
</message>
<message>
<source>STB_SCALE</source>
- <translation>Scale transform</translation>
+ <translation>Scale a shape</translation>
</message>
<message>
<source>STB_SECTION</source>
<source>STB_SHADING</source>
<translation>Shading</translation>
</message>
+ <message>
+ <source>STB_VECTOR_MODE</source>
+ <translation>Change Edge Presentation Mode</translation>
+ </message>
<message>
<source>STB_SHADING_COLOR</source>
<translation>Set shading color</translation>
</message>
<message>
<source>STB_SKETCH</source>
- <translation>Sketch</translation>
+ <translation>Create 2D sketch</translation>
+ </message>
+ <message>
+ <source>STB_3DSKETCH</source>
+ <translation>Create 3D sketch</translation>
</message>
<message>
<source>STB_SOLID</source>
</message>
<message>
<source>STB_TOLERANCE</source>
- <translation>Compute tolerance</translation>
+ <translation>Compute tolerance of the shape</translation>
</message>
<message>
<source>STB_TORUS</source>
</message>
<message>
<source>STB_TRANSLATION</source>
- <translation>Translation</translation>
+ <translation>Translate shape</translation>
</message>
<message>
<source>STB_VECTOR</source>
<source>STB_WORK_PLANE</source>
<translation>Create a working plane</translation>
</message>
+ <message>
+ <source>STB_POP_POINT_MARKER</source>
+ <translation>Set Point Marker</translation>
+ </message>
<message>
<source>SUPPRESS_RESULT</source>
<translation>Suppress Result</translation>
<source>TOOL_TRANSFORMATION</source>
<translation>Transformation</translation>
</message>
+ <message>
+ <source>TOOL_BUILD</source>
+ <translation>Build</translation>
+ </message>
+ <message>
+ <source>TOOL_OPERATIONS</source>
+ <translation>Operations</translation>
+ </message>
+ <message>
+ <source>TOOL_ADVANCED</source>
+ <translation>Advanced</translation>
+ </message>
+ <message>
+ <source>TOOL_MEASURES</source>
+ <translation>Measures</translation>
+ </message>
<message>
<source>TOP_ARC</source>
<translation>Create an arc</translation>
</message>
<message>
<source>TOP_BND_BOX</source>
- <translation>Compute bounding box</translation>
+ <translation>Bounding box</translation>
</message>
<message>
<source>TOP_BOX</source>
</message>
<message>
<source>TOP_CHECK</source>
- <translation>Check</translation>
+ <translation>Check shape</translation>
</message>
<message>
<source>TOP_CHECK_COMPOUND</source>
</message>
<message>
<source>TOP_COMPOUND</source>
- <translation>Build a compound</translation>
+ <translation>Build compound</translation>
</message>
<message>
<source>TOP_CONE</source>
<source>TOP_DELETE</source>
<translation>Delete object</translation>
</message>
+ <message>
+ <source>TOP_RECTANGLE</source>
+ <translation>Create rectangular face</translation>
+ </message>
<message>
<source>TOP_DISK</source>
- <translation>Build a Disk</translation>
+ <translation>Create a disk</translation>
</message>
<message>
<source>TOP_DISPLAY</source>
</message>
<message>
<source>TOP_EDGE</source>
- <translation>Build an edge</translation>
+ <translation>Build edge</translation>
</message>
<message>
<source>TOP_ELLIPSE</source>
</message>
<message>
<source>TOP_FACE</source>
- <translation>Build a face</translation>
+ <translation>Build face</translation>
</message>
<message>
<source>TOP_FILLET</source>
- <translation>Fillet</translation>
+ <translation>Fillet 3D</translation>
+ </message>
+ <message>
+ <source>TOP_FILLET_1D</source>
+ <translation>Fillet 1D</translation>
+ </message>
+ <message>
+ <source>TOP_FILLET_2D</source>
+ <translation>Fillet 2D</translation>
</message>
<message>
<source>TOP_FILLING</source>
</message>
<message>
<source>TOP_INERTIA</source>
- <translation>Compute intertia</translation>
+ <translation>Moments of intertia</translation>
</message>
<message>
<source>TOP_ISOS</source>
</message>
<message>
<source>TOP_MASS_CENTER</source>
- <translation>Compute center of mass</translation>
+ <translation>Center of mass</translation>
</message>
<message>
<source>TOP_MIN_DIST</source>
- <translation>Compute minimum distance</translation>
+ <translation>Minimum distance</translation>
</message>
<message>
<source>TOP_MIRROR</source>
</message>
<message>
<source>TOP_MODIFY_LOCATION</source>
- <translation>Modify the Location</translation>
+ <translation>Modify location</translation>
</message>
<message>
<source>TOP_MUL_ROTATION</source>
</message>
<message>
<source>TOP_PIPE</source>
- <translation>Extrusion along a path</translation>
+ <translation>Extrusion along path</translation>
</message>
<message>
<source>TOP_PLANE</source>
<source>TOP_POP_CREATE_GROUP</source>
<translation>Create Group</translation>
</message>
+ <message>
+ <source>TOP_POP_SHOW_CHILDREN</source>
+ <translation>Show Children</translation>
+ </message>
+ <message>
+ <source>TOP_POP_HIDE_CHILDREN</source>
+ <translation>Hide Children</translation>
+ </message>
<message>
<source>TOP_POP_ISOS</source>
<translation>Isolines</translation>
</message>
+ <message>
+ <source>TOP_POP_DEFLECTION</source>
+ <translation>Deflection Coefficient</translation>
+ </message>
<message>
<source>TOP_POP_RENAME</source>
<translation>Rename</translation>
</message>
<message>
<source>TOP_SHELL</source>
- <translation>Build a shell</translation>
+ <translation>Build shell</translation>
</message>
<message>
<source>TOP_SKETCH</source>
- <translation>Sketch</translation>
+ <translation>2D sketch</translation>
+ </message>
+ <message>
+ <source>TOP_3DSKETCH</source>
+ <translation>3D sketch</translation>
</message>
<message>
<source>TOP_SOLID</source>
- <translation>Build a solid</translation>
+ <translation>Build solid</translation>
</message>
<message>
<source>TOP_SPHERE</source>
</message>
<message>
<source>TOP_TOLERANCE</source>
- <translation>Compute tolerance</translation>
+ <translation>Tolerance</translation>
</message>
<message>
<source>TOP_TORUS</source>
</message>
<message>
<source>TOP_WIRE</source>
- <translation>Build a wire</translation>
+ <translation>Build wire</translation>
</message>
<message>
<source>TOP_WORK_PLANE</source>
<translation>Create a working plane</translation>
</message>
+ <message>
+ <source>TOP_POP_POINT_MARKER</source>
+ <translation>Point Marker</translation>
+ </message>
<message>
<source>WRN_NOT_IMPLEMENTED</source>
<translation>Sorry, this functionality is not yet implemented</translation>
</message>
<message>
<source>TOP_NORMALE</source>
- <translation>Compute normal to a face</translation>
+ <translation>Normal to a face</translation>
</message>
<message>
<source>MEN_NORMALE</source>
</message>
<message>
<source>STB_NORMALE</source>
- <translation>Compute normal to a face in a point (optional)</translation>
+ <translation>Compute normal to the face</translation>
</message>
<message>
<source>TOP_MEASURE_ANGLE</source>
- <translation>Compute angle</translation>
+ <translation>Angle</translation>
</message>
<message>
<source>MEN_MEASURE_ANGLE</source>
<source>GEOM_FILLING_APPROX</source>
<translation>Approximation</translation>
</message>
+ <message>
+ <source>GEOM_FILLING_METHOD</source>
+ <translation>Method</translation>
+ </message>
+ <message>
+ <source>GEOM_FILLING_DEFAULT</source>
+ <translation>Default (standard behaviour)</translation>
+ </message>
+ <message>
+ <source>GEOM_FILLING_USEORI</source>
+ <translation>Use edges orientation</translation>
+ </message>
+ <message>
+ <source>GEOM_FILLING_AUTO</source>
+ <translation>Auto-correct edges orientation</translation>
+ </message>
<message>
<source>GEOM_WRN_NO_APPROPRIATE_SELECTION</source>
<translation>No appropriate objects selected</translation>
</message>
<message>
<source>GEOM_SHAPES_ON_SHAPE_CSHAPE</source>
- <translation>Shape for checking</translation>
+ <translation>Solid for checking</translation>
</message>
<message>
<source>GEOM_SHAPES_ON_SHAPE_STATE</source>
<source>GEOM_PLANAR_FACE</source>
<translation>Planar Face</translation>
</message>
+ <message>
+ <source>GEOM_PLANAR_EDGE_WIRE</source>
+ <translation>Wire with Planar Edges</translation>
+ </message>
<message>
<source>GEOM_POLYGON</source>
<translation>Polygon</translation>
</message>
+ <message>
+ <source>GEOM_POLYHEDRON</source>
+ <translation>Polyhedron</translation>
+ </message>
<message>
<source>GEOM_NORMAL</source>
<translation>Normal direction</translation>
<source>GEOM_RESTORE_SUB_SHAPES</source>
<translation>Set presentation parameters and subshapes from arguments</translation>
</message>
+ <message>
+ <source>GEOM_RSS_ADD_FREFIX</source>
+ <translation>Add prefix to names of restored subshapes</translation>
+ </message>
<message>
<source>GEOM_ALL_IMPORT_FILES</source>
<translation>All supported formats ( %1 )</translation>
<source>GEOM_IMPORT_ERRORS</source>
<translation>Import operation has finished with errors:</translation>
</message>
+ <message>
+ <source>GEOM_PUBLISH_NAMED_SHAPES</source>
+ <translation>Create groups for named shapes (if there are any)?</translation>
+ </message>
+ <message>
+ <source>GEOM_SCALE_DIMENSIONS</source>
+ <translation>Would you like to take into account the units?
+Otherwise the dimensions will be kept without modifications.</translation>
+ </message>
+ <message>
+ <source>GEOM_ADVANCED</source>
+ <translation>Advanced shape: type %1</translation>
+ </message>
+ <message>
+ <source>GEOM_PRECISION_HINT</source>
+ <translation>
+Input value precision can be adjusted using
+'%1' parameter in Geometry module preferences.</translation>
+ </message>
+ </context>
+ <context>
+ <name>BasicGUI_CurveDlg</name>
+ <message>
+ <source>GEOM_IS_CLOSED</source>
+ <translation>Build a closed edge</translation>
+ </message>
</context>
<context>
<name>BasicGUI_EllipseDlg</name>
<translation>Delete objects</translation>
</message>
</context>
+ <context>
+ <name>GEOMToolsGUI_DeflectionDlg</name>
+ <message>
+ <source>GEOM_DEFLECTION_TLT</source>
+ <translation>Select Deflection of Shape</translation>
+ </message>
+ <message>
+ <source>GEOM_DEFLECTION</source>
+ <translation>Deflection :</translation>
+ </message>
+ </context>
+ <context>
+ <name>GEOMToolsGUI_MarkerDlg</name>
+ <message>
+ <source>SET_MARKER_TLT</source>
+ <translation>Set Point Marker</translation>
+ </message>
+ <message>
+ <source>STANDARD_MARKER</source>
+ <translation>Standard</translation>
+ </message>
+ <message>
+ <source>CUSTOM_MARKER</source>
+ <translation>Custom</translation>
+ </message>
+ <message>
+ <source>TYPE</source>
+ <translation>Type:</translation>
+ </message>
+ <message>
+ <source>SCALE</source>
+ <translation>Scale:</translation>
+ </message>
+ <message>
+ <source>CUSTOM</source>
+ <translation>Texture:</translation>
+ </message>
+ <message>
+ <source>BROWSE</source>
+ <translation>Browse...</translation>
+ </message>
+ <message>
+ <source>OK_BTN</source>
+ <translation>&OK</translation>
+ </message>
+ <message>
+ <source>CANCEL_BTN</source>
+ <translation>&Cancel</translation>
+ </message>
+ <message>
+ <source>HELP_BTN</source>
+ <translation>&Help</translation>
+ </message>
+ <message>
+ <source>LOAD_TEXTURE_TLT</source>
+ <translation>Load Texture</translation>
+ </message>
+ </context>
+ <context>
+ <name>AdvancedGUI_PipeTShapeDlg</name>
+ <message>
+ <source>GEOM_PIPE_TSHAPE_TITLE</source>
+ <translation>Pipe TShape Construction</translation>
+ </message>
+ <message>
+ <source>GEOM_PIPE_TSHAPE</source>
+ <translation>PipeTShape</translation>
+ </message>
+ <message>
+ <source>GEOM_PIPE_TSHAPE_MPIPE</source>
+ <translation>Main pipe</translation>
+ </message>
+ <message>
+ <source>GEOM_PIPE_TSHAPE_R</source>
+ <translation>Radius</translation>
+ </message>
+ <message>
+ <source>GEOM_PIPE_TSHAPE_W</source>
+ <translation>Width</translation>
+ </message>
+ <message>
+ <source>GEOM_PIPE_TSHAPE_L</source>
+ <translation>Half-length</translation>
+ </message>
+ <message>
+ <source>GEOM_PIPE_TSHAPE_IPIPE</source>
+ <translation>Incident pipe</translation>
+ </message>
+ <message>
+ <source>GEOM_PIPE_TSHAPE_CHAMFER</source>
+ <translation>Chamfer</translation>
+ </message>
+ <message>
+ <source>GEOM_PIPE_TSHAPE_CHAMFER_H</source>
+ <translation>Height</translation>
+ </message>
+ <message>
+ <source>GEOM_PIPE_TSHAPE_CHAMFER_W</source>
+ <translation>Width</translation>
+ </message>
+ <message>
+ <source>GEOM_PIPE_TSHAPE_FILLET</source>
+ <translation>Fillet</translation>
+ </message>
+ <message>
+ <source>GEOM_PIPE_TSHAPE_HEX</source>
+ <translation>Prepare for hex mesh</translation>
+ </message>
+ <message>
+ <source>GEOM_PIPE_TSHAPE_POSITION</source>
+ <translation>Set position</translation>
+ </message>
+ <message>
+ <source>GEOM_PIPE_TSHAPE_POSITION_P1</source>
+ <translation>Junction P1</translation>
+ </message>
+ <message>
+ <source>GEOM_PIPE_TSHAPE_POSITION_P2</source>
+ <translation>Junction P2</translation>
+ </message>
+ <message>
+ <source>GEOM_PIPE_TSHAPE_POSITION_P3</source>
+ <translation>Junction P3</translation>
+ </message>
+ <message>
+ <source>GEOM_PIPE_TSHAPE_POSITION_LBL_L1</source>
+ <translation>New L1</translation>
+ </message>
+ <message>
+ <source>GEOM_PIPE_TSHAPE_POSITION_LBL_L2</source>
+ <translation>New L2</translation>
+ </message>
+ </context>
+ <context>
+ <name>@default</name>
+ <message>
+ <source>TOP_PIPETSHAPE</source>
+ <translation>Create Pipe TShape</translation>
+ </message>
+ <message>
+ <source>MEN_PIPETSHAPE</source>
+ <translation>Pipe TShape</translation>
+ </message>
+ <message>
+ <source>STB_PIPETSHAPE</source>
+ <translation>Create new Pipe TShape object</translation>
+ </message>
+ <message>
+ <source>GEOM_ADVANCED_201</source>
+ <translation>Pipe TShape</translation>
+ </message>
+ <message>
+ <source>HALF_LENGTH_MAIN_PIPE</source>
+ <translation>Main pipe half length</translation>
+ </message>
+ <message>
+ <source>HALF_LENGTH_INCIDENT_PIPE</source>
+ <translation>Incident pipe half length</translation>
+ </message>
+ <message>
+ <source>CIRCULAR_QUARTER_PIPE</source>
+ <translation>Circular quarter of pipe</translation>
+ </message>
+ <message>
+ <source>THICKNESS</source>
+ <translation>Thickness</translation>
+ </message>
+ <message>
+ <source>FLANGE</source>
+ <translation>Flange</translation>
+ </message>
+ <message>
+ <source>CHAMFER_OR_FILLET</source>
+ <translation>Chamfer or fillet</translation>
+ </message>
+ <message>
+ <source>CHAMFER</source>
+ <translation>Chamfer</translation>
+ </message>
+ <message>
+ <source>FILLET</source>
+ <translation>Fillet</translation>
+ </message>
+ <message>
+ <source>JUNCTION_FACE_1</source>
+ <translation>Junction 1</translation>
+ </message>
+ <message>
+ <source>JUNCTION_FACE_2</source>
+ <translation>Junction 2</translation>
+ </message>
+ <message>
+ <source>JUNCTION_FACE_3</source>
+ <translation>Junction 3</translation>
+ </message>
+ </context>
+ <!-- @@ insert new functions before this line @@ -->
</TS>