22763: [EDF] Shape processing

[modules/geom.git] / src / GEOMGUI / GEOM_msg_en.ts

diff --git a/src/GEOMGUI/GEOM_msg_en.ts b/src/GEOMGUI/GEOM_msg_en.ts
index 9ab089610bc91c292786a582954f8eb6c3954524..8f7d8a97ade588a59a9ba86f9828def3a49505c0 100644 (file)
--- a/src/GEOMGUI/GEOM_msg_en.ts
+++ b/src/GEOMGUI/GEOM_msg_en.ts
@@ -38,6 +38,14 @@ Do you still want to delete these objects?</translation>
         <source>DEVIDE_EDGE_NEW_OBJECT_NAME</source>
         <translation>NewObject</translation>
     </message>
+    <message>
+        <source>DEVIDE_EDGE_BAD_PROJ_MSG</source>
+        <translation>Projection outside the edge</translation>
+    </message>
+    <message>
+        <source>DEVIDE_EDGE_BY_PROJ_POINT</source>
+        <translation>Points to project</translation>
+    </message>
     <message>
         <source>ERROR_SHAPE_TYPE</source>
         <translation>Object of incorrect type selected!
@@ -376,44 +384,44 @@ Please, select face, shell or solid and try again</translation>
         <translation>Incriminated Sub-shapes</translation>
     </message>
     <message>
-        <source>GEOM_GETNONBLOCKS_TITLE</source>
-        <translation>Get non-hexahedral solids and non-quadrangular faces</translation>
+        <source>GEOM_CHECK_BLOCKS_NOT_BLOCK</source>
+        <translation>Not a Block</translation>
     </message>
     <message>
-        <source>GEOM_GETNONBLOCKS</source>
-        <translation>Get non blocks</translation>
+        <source>GEOM_CHECK_BLOCKS_EXTRA_EDGE</source>
+        <translation>Extra Edge</translation>
     </message>
     <message>
-        <source>GEOM_NONBLOCKS</source>
-        <translation>NonBlocksGroup</translation>
+        <source>GEOM_CHECK_BLOCKS_INVALID_CONNECTION</source>
+        <translation>Invalid Connection # %1</translation>
     </message>
     <message>
-        <source>GEOM_CHECK_INFOS</source>
-        <translation>Object And Its Topological Information</translation>
+        <source>GEOM_CHECK_BLOCKS_NOT_CONNECTED</source>
+        <translation>Not Connected</translation>
     </message>
     <message>
-        <source>GEOM_CHECK_SHAPE</source>
-        <translation>Check Shape</translation>
+        <source>GEOM_CHECK_BLOCKS_NOT_GLUED</source>
+        <translation>Not Glued # %1</translation>
     </message>
     <message>
-        <source>GEOM_CHECK_TITLE</source>
-        <translation>Check Shape Information</translation>
+        <source>GEOM_GETNONBLOCKS_TITLE</source>
+        <translation>Get non-hexahedral solids and non-quadrangular faces</translation>
     </message>
     <message>
-        <source>GEOM_CHECK_SELF_INTERSECTIONS</source>
-        <translation>Detect Self-intersections</translation>
+        <source>GEOM_GETNONBLOCKS</source>
+        <translation>Get non blocks</translation>
     </message>
     <message>
-        <source>GEOM_CHECK_SELF_INTERSECTIONS_FAILED</source>
-        <translation>Detection of self-intersections failed</translation>
+        <source>GEOM_NONBLOCKS</source>
+        <translation>NonBlocksGroup</translation>
     </message>
     <message>
-        <source>GEOM_NO_SELF_INTERSECTIONS</source>
-        <translation>There are no self-intersections in the shape</translation>
+        <source>GEOM_CHECK_INFOS</source>
+        <translation>Object And Its Topological Information</translation>
     </message>
     <message>
-        <source>GEOM_SELF_INTERSECTIONS_FOUND</source>
-        <translation>Some self-intersections detected</translation>
+        <source>GEOM_CHECK_SELF_INTERSECTIONS</source>
+        <translation>Detect Self-intersections</translation>
     </message>
     <message>
         <source>GEOM_CIRCLE</source>
@@ -519,6 +527,10 @@ Please, select face, shell or solid and try again</translation>
         <source>GEOM_CYLINDER_TITLE</source>
         <translation>Cylinder Construction</translation>
     </message>
+    <message>
+        <source>GEOM_CYLINDER_ANGLE_ERR</source>
+        <translation>Angle values 0 and 360 are unsafe to build proper volumes. Please uncheck the "Angle" box to use the regular cylinder constructor.</translation>
+    </message>
     <message>
         <source>GEOM_D1</source>
         <translation>D1 :</translation>
@@ -557,7 +569,7 @@ Please, select face, shell or solid and try again</translation>
     </message>
     <message>
         <source>GEOM_DIVIDE_EDGE_TITLE</source>
-        <translation>Addition of point</translation>
+        <translation>Addition of points</translation>
     </message>
     <message>
         <source>GEOM_DX</source>
@@ -675,6 +687,10 @@ Please, select face, shell or solid and try again</translation>
         <source>GEOM_LCS</source>
         <translation>Local coordinate system</translation>
     </message>
+    <message>
+        <source>GEOM_LOCATIONS</source>
+        <translation>Locations</translation>
+    </message>
     <message>
         <source>GEOM_FACES</source>
         <translation>Faces</translation>
@@ -683,10 +699,30 @@ Please, select face, shell or solid and try again</translation>
         <source>GEOM_FACE_FFW</source>
         <translation>Face creation from wires and/or edges</translation>
     </message>
+    <message>
+        <source>GEOM_FACE_FROM_SURFACE</source>
+        <translation>Face creation from surface bounded by wire</translation>
+    </message>
     <message>
         <source>GEOM_FACE_OPT</source>
         <translation>Try to create a planar face</translation>
     </message>
+    <message>
+        <source>GEOM_FACE_FFWC</source>
+        <translation>Face creation from wire and constraints</translation>
+    </message>
+    <message>
+        <source>GEOM_CONSTRAINTS</source>
+        <translation>Constraints</translation>
+    </message>
+    <message>
+        <source>GEOM_FACE_CONSTRAINT</source>
+        <translation>Constraint Face</translation>
+    </message>
+    <message>
+        <source>GEOM_SOLID_FROM_FACE_OPT</source>
+        <translation>Intersect shapes</translation>
+    </message>
     <message>
         <source>MAKE_FACE_TOLERANCE_TOO_BIG</source>
         <translation>Cannot build a planar face: required tolerance is
@@ -766,7 +802,7 @@ Please, select face, shell or solid and try again</translation>
     </message>
     <message>
         <source>GEOM_FILLING_COMPOUND</source>
-        <translation>Input compound</translation>
+        <translation>Input contours</translation>
     </message>
     <message>
         <source>GEOM_FILLING_MAX_DEG</source>
@@ -812,6 +848,10 @@ Please, select face, shell or solid and try again</translation>
         <source>GEOM_FREE_FACES</source>
         <translation>Free faces</translation>
     </message>
+    <message>
+        <source>GEOM_FREE_FACES_NAME</source>
+        <translation>Free_face</translation>
+    </message>
     <message>
         <source>GEOM_FREE_FACES_TITLE</source>
         <translation>Free faces</translation>
@@ -844,6 +884,14 @@ Please, select face, shell or solid and try again</translation>
         <source>GEOM_GLUE_EDGES_TITLE</source>
         <translation>Glue edges</translation>
     </message>
+    <message>
+        <source>GEOM_GLUE_EDGES_DETECT_TITLE</source>
+        <translation>Coincident edges detection</translation>
+    </message>
+    <message>
+        <source>GEOM_GLUE_FACES_DETECT_TITLE</source>
+        <translation>Coincident faces detection</translation>
+    </message>
     <message>
         <source>GLUE_ERROR_STICKED_SHAPES</source>
         <translation>The tolerance value is too big. Sticked shapes are detected.</translation>
@@ -884,14 +932,6 @@ Please, select face, shell or solid and try again</translation>
         <source>GEOM_INERTIA_CONSTR</source>
         <translation>Matrix And Moments Of Inertia</translation>
     </message>
-    <message>
-        <source>GEOM_INERTIA_I</source>
-        <translation>%1:1 :</translation>
-    </message>
-    <message>
-        <source>GEOM_INERTIA_IXYZ</source>
-        <translation>IX &amp; IY &amp; IZ :</translation>
-    </message>
     <message>
         <source>GEOM_INERTIA_TITLE</source>
         <translation>Calculs Of Inertia</translation>
@@ -988,14 +1028,6 @@ Please, select face, shell or solid and try again</translation>
         <source>GEOM_MEN_ENTER_ANGLE</source>
         <translation>Enter An Angle In Degrees</translation>
     </message>
-    <message>
-        <source>GEOM_MEN_EXPORT</source>
-        <translation>Export</translation>
-    </message>
-    <message>
-        <source>GEOM_MEN_IMPORT</source>
-        <translation>Import</translation>
-    </message>
     <message>
         <source>GEOM_MEN_ISOS</source>
         <translation>Select Number Of Isos</translation>
@@ -1193,17 +1225,45 @@ Please, select face, shell or solid and try again</translation>
         <translation>Division pattern</translation>
     </message>
     <message>
-        <source>GEOM_PROJECTION</source>
-        <translation>Projection</translation>
+        <source>GEOM_PROJECTION_ON_FACE</source>
+        <translation>Projection on Face</translation>
+    </message>
+    <message>
+        <source>GEOM_PROJECTION_ON_WIRE</source>
+        <translation>Projection on Wire</translation>
+    </message>
+    <message>
+        <source>GEOM_PROJECTION_ON_EDGE</source>
+        <translation>Projection on Edge</translation>
     </message>
     <message>
         <source>GEOM_PROJECTION_TITLE</source>
-        <translation>Projection on Face</translation>
+        <translation>Projection</translation>
     </message>
     <message>
-        <source>GEOM_SOURCE_OBJECT</source>
+        <source>GEOM_PROJ_ON_FACE_SOURCE</source>
         <translation>Source vertex, edge or wire</translation>
     </message>
+    <message>
+        <source>GEOM_PROJ_ON_FACE_TARGET</source>
+        <translation>Target face</translation>
+    </message>
+    <message>
+        <source>GEOM_PROJ_ON_WIRE_SOURCE</source>
+        <translation>Source vertex</translation>
+    </message>
+    <message>
+        <source>GEOM_PROJ_ON_WIRE_TARGET</source>
+        <translation>Target wire</translation>
+    </message>
+    <message>
+        <source>GEOM_PROJ_ON_EDGE_SOURCE</source>
+        <translation>Source vertex</translation>
+    </message>
+    <message>
+        <source>GEOM_PROJ_ON_EDGE_TARGET</source>
+        <translation>Target edge</translation>
+    </message>
     <message>
         <source>GEOM_SOLUTION</source>
         <translation>Solution :</translation>
@@ -1213,8 +1273,12 @@ Please, select face, shell or solid and try again</translation>
         <translation>Solution %1</translation>
     </message>
     <message>
-        <source>GEOM_TARGET_OBJECT</source>
-        <translation>Target face</translation>
+        <source>GEOM_WITH_CONTACT</source>
+        <translation>With contact</translation>
+    </message>
+    <message>
+        <source>GEOM_WITH_CORRECTION</source>
+        <translation>With correction</translation>
     </message>
     <message>
         <source>GEOM_OPERATIONS</source>
@@ -1622,11 +1686,11 @@ Please, select face, shell or solid and try again</translation>
     </message>
     <message>
         <source>GEOM_SECTION</source>
-        <translation>Section</translation>
+        <translation>Intersection</translation>
     </message>
     <message>
         <source>GEOM_SECTION_TITLE</source>
-        <translation>Section Of Two Objects</translation>
+        <translation>Intersection Of Two Objects</translation>
     </message>
     <message>
         <source>GEOM_SELECTED_FACE</source>
@@ -1640,6 +1704,10 @@ Please, select face, shell or solid and try again</translation>
         <source>GEOM_SELECTED_SHAPE</source>
         <translation>Selected shape</translation>
     </message>
+    <message>
+        <source>GEOM_SELECTED_SHAPES</source>
+        <translation>Selected shapes</translation>
+    </message>
     <message>
         <source>GEOM_SELECTION</source>
         <translation>Selection</translation>
@@ -1916,6 +1984,14 @@ Please, select face, shell or solid and try again</translation>
         <source>GEOM_SOLID_TITLE</source>
         <translation>Solid Construction</translation>
     </message>
+    <message>
+        <source>GEOM_SOLID_SHELLS</source>
+        <translation>Make Solid From Shells</translation>
+    </message>
+    <message>
+        <source>GEOM_SOLID_FACES</source>
+        <translation>Make Solid From Connected Set Of Faces/Shells</translation>
+    </message>
     <message>
         <source>GEOM_SPHERE</source>
         <translation>Sphere</translation>
@@ -2206,7 +2282,7 @@ Please, select face, shell or solid and try again</translation>
     </message>
     <message>
         <source>GEOM_VERTEXES</source>
-        <translation>Vertexes</translation>
+        <translation>Vertices</translation>
     </message>
     <message>
         <source>GEOM_WATER_DENSITY</source>
@@ -2304,6 +2380,10 @@ Please, select face, shell or solid and try again</translation>
         <source>GEOM_WRN_WARNING</source>
         <translation>Warning</translation>
     </message>
+    <message>
+        <source>GEOM_WRN_FACES_NOT_SHELL</source>
+        <translation>Unable to create a shell. Result is a compound of faces.</translation>
+    </message>
     <message>
         <source>WRN_SHAPE_UNCLOSED</source>
         <translation>Unable to create solid from unclosed shape %1</translation>
@@ -2336,6 +2416,18 @@ Please, select face, shell or solid and try again</translation>
         <source>LIMIT_TOLERANCE_NEW_OBJ_NAME</source>
         <translation>Limit_tolerance</translation>
     </message>
+    <message>
+        <source>MEN_CURVE_CREATOR</source>
+        <translation>2D Polyline</translation>
+    </message>
+    <message>
+      <source>TOP_CURVE_CREATOR</source>
+      <translation>Create 2D polyline</translation>
+    </message>
+    <message>
+      <source>STB_CURVE_CREATOR</source>
+      <translation>Create 2D polyline</translation>
+    </message>
     <message>
         <source>MEN_ALL_SEL_ONLY</source>
         <translation>Select All</translation>
@@ -2554,7 +2646,7 @@ Please, select face, shell or solid and try again</translation>
     </message>
     <message>
         <source>MEN_EXPORT</source>
-        <translation>Export...</translation>
+        <translation>Export</translation>
     </message>
     <message>
         <source>MEN_EXTRUSION</source>
@@ -2662,7 +2754,7 @@ Please, select face, shell or solid and try again</translation>
     </message>
     <message>
         <source>MEN_IMPORT</source>
-        <translation>Import...</translation>
+        <translation>Import</translation>
     </message>
     <message>
         <source>MEN_INERTIA</source>
@@ -2860,6 +2952,10 @@ Please, select face, shell or solid and try again</translation>
         <source>MEN_POP_VECTORS</source>
         <translation>Show Edge Direction</translation>
     </message>
+    <message>
+        <source>MEN_POP_VERTICES</source>
+        <translation>Show Vertices</translation>
+    </message>
     <message>
         <source>MEN_PREFERENCES</source>
         <translation>Preferences</translation>
@@ -2902,7 +2998,7 @@ Please, select face, shell or solid and try again</translation>
     </message>
     <message>
         <source>MEN_SECTION</source>
-        <translation>Section</translation>
+        <translation>Intersection</translation>
     </message>
     <message>
         <source>MEN_SELECT_ONLY</source>
@@ -2944,10 +3040,22 @@ Please, select face, shell or solid and try again</translation>
         <source>MEN_3DSKETCH</source>
         <translation>3D Sketch</translation>
     </message>
+    <message>
+        <source>MEN_ISOLINE</source>
+        <translation>Isoline</translation>
+    </message>
+    <message>
+        <source>MEN_SURFACE_FROM_FACE</source>
+        <translation>Surface From Face</translation>
+    </message>
     <message>
         <source>MEN_SOLID</source>
         <translation>Solid</translation>
     </message>
+    <message>
+        <source>MEN_SOLID_FROM_FACES</source>
+        <translation>Solid from connected faces</translation>
+    </message>
     <message>
         <source>MEN_SOLID_SEL_ONLY</source>
         <translation>Solid</translation>
@@ -2984,6 +3092,10 @@ Please, select face, shell or solid and try again</translation>
         <source>MEN_MATERIALS_LIBRARY</source>
         <translation>Materials library</translation>
     </message>
+    <message>
+        <source>MEN_TEXTURE</source>
+        <translation>Texture</translation>
+    </message>
     <message>
         <source>MEN_TORUS</source>
         <translation>Torus</translation>
@@ -3024,6 +3136,14 @@ Please, select face, shell or solid and try again</translation>
         <source>MEN_VECTOR_MODE_OFF</source>
         <translation>Hide Edge Direction</translation>
     </message>
+    <message>
+        <source>MEN_VERTICES_MODE_ON</source>
+        <translation>Show Vertices</translation>
+    </message>
+    <message>
+        <source>MEN_VERTICES_MODE_OFF</source>
+        <translation>Hide Vertices</translation>
+    </message>
     <message>
         <source>MEN_WIREFRAME</source>
         <translation>Wireframe</translation>
@@ -3048,6 +3168,14 @@ Please, select face, shell or solid and try again</translation>
         <source>MEN_POP_PREDEF_MATER_CUSTOM</source>
         <translation>Custom...</translation>
     </message>
+    <message>
+        <source>MEN_EDGE_EXTEND</source>
+        <translation>Extended Edge</translation>
+    </message>
+    <message>
+        <source>MEN_FACE_EXTEND</source>
+        <translation>Extended Face</translation>
+    </message>
     <message>
         <source>NAME_LBL</source>
         <translation>Name: </translation>
@@ -3104,6 +3232,10 @@ Please, select face, shell or solid and try again</translation>
         <source>PREF_DISPLAY_MODE</source>
         <translation>Default display mode</translation>
     </message>
+    <message>
+        <source>PREF_TRANSPARENCY</source>
+        <translation>Transparency</translation>
+    </message>
     <message>
         <source>PREF_FREE_BOUND_COLOR</source>
         <translation>Color of free boundaries</translation>
@@ -3220,6 +3352,42 @@ Please, select face, shell or solid and try again</translation>
         <source>PREF_AUTO_BRING_TO_FRONT</source>
         <translation>Automatic bring to front</translation>
     </message>
+    <message>
+        <source>PREF_DIMENSIONS</source>
+        <translation>Dimensions (Measurements)</translation>
+    </message>
+    <message>
+        <source>PREF_DIMENSIONS_COLOR</source>
+        <translation>Color</translation>
+    </message>
+    <message>
+        <source>PREF_DIMENSIONS_LINE_WIDTH</source>
+        <translation>Line width</translation>
+    </message>
+    <message>
+        <source>PREF_DIMENSIONS_FONT_HEIGHT</source>
+        <translation>Font height</translation>
+    </message>
+    <message>
+        <source>PREF_DIMENSIONS_ARROW_LENGTH</source>
+        <translation>Length of arrows</translation>
+    </message>
+    <message>
+        <source>PREF_DIMENSIONS_LENGTH_UNITS</source>
+        <translation>Length measurement units</translation>
+    </message>
+    <message>
+        <source>PREF_DIMENSIONS_ANGLE_UNITS</source>
+        <translation>Angle measurement units</translation>
+    </message>
+    <message>
+        <source>PREF_DIMENSIONS_DEFAULT_FLYOUT</source>
+        <translation>Default flyout length</translation>
+    </message>
+    <message>
+        <source>PREF_DIMENSIONS_SHOW_UNITS</source>
+        <translation>Show units of measurement</translation>
+    </message>
     <message>
         <source>PREF_ISOS</source>
         <translation>Number of isolines</translation>
@@ -3260,7 +3428,6 @@ Please, select face, shell or solid and try again</translation>
         <source>PREF_SCALAR_BAR_NUMBER_OF_INTERVALS</source>
         <translation>Number of intervals</translation>
     </message>
-
     <message>
         <source>PROCESS_SHAPE_NEW_OBJ_NAME</source>
         <translation>ProcessShape</translation>
@@ -3445,10 +3612,6 @@ Please, select face, shell or solid and try again</translation>
         <source>STB_EXPLODE_BLOCKS</source>
         <translation>Explode on Blocks</translation>
     </message>
-    <message>
-        <source>STB_EXPORT</source>
-        <translation>Export geometry to BREP file</translation>
-    </message>
     <message>
         <source>STB_EXTRUSION</source>
         <translation>Create an extrusion</translation>
@@ -3533,10 +3696,6 @@ Please, select face, shell or solid and try again</translation>
         <source>STB_HEX_SOLID</source>
         <translation>Hexahedral Solid</translation>
     </message>
-    <message>
-        <source>STB_IMPORT</source>
-        <translation>Import geometry from BREP file</translation>
-    </message>
     <message>
         <source>STB_INERTIA</source>
         <translation>Compute moments of intertia of the shape</translation>
@@ -3681,6 +3840,10 @@ Please, select face, shell or solid and try again</translation>
         <source>STB_POP_VECTORS</source>
         <translation>Show Edge Direction</translation>
     </message>
+    <message>
+        <source>STB_POP_VERTICES</source>
+        <translation>Show Vertices</translation>
+    </message>
     <message>
         <source>STB_POP_SETTEXTURE</source>
         <translation>Add a texture</translation>
@@ -3723,7 +3886,7 @@ Please, select face, shell or solid and try again</translation>
     </message>
     <message>
         <source>STB_SECTION</source>
-        <translation>Section</translation>
+        <translation>Intersection</translation>
     </message>
     <message>
         <source>STB_SEWING</source>
@@ -3769,6 +3932,14 @@ Please, select face, shell or solid and try again</translation>
         <source>STB_3DSKETCH</source>
         <translation>Create 3D sketch</translation>
     </message>
+    <message>
+        <source>STB_ISOLINE</source>
+        <translation>Create U- or V-Isoline</translation>
+    </message>
+    <message>
+        <source>STB_SURFACE_FROM_FACE</source>
+        <translation>Create a Surface From Face</translation>
+    </message>
     <message>
         <source>STB_SOLID</source>
         <translation>Build a solid</translation>
@@ -3901,54 +4072,6 @@ Please, select face, shell or solid and try again</translation>
         <source>TOM_X</source>
         <translation>X</translation>
     </message>
-    <message>
-        <source>TOOL_BASIC</source>
-        <translation>Basic</translation>
-    </message>
-    <message>
-        <source>TOOL_BLOCKS</source>
-        <translation>Blocks</translation>
-    </message>
-    <message>
-        <source>TOOL_BOOLEAN</source>
-        <translation>Boolean operations</translation>
-    </message>
-    <message>
-        <source>TOOL_FEATURES</source>
-        <translation>Modification</translation>
-    </message>
-    <message>
-        <source>TOOL_GENERATION</source>
-        <translation>Generation</translation>
-    </message>
-    <message>
-        <source>TOOL_PRIMITIVES</source>
-        <translation>Primitives</translation>
-    </message>
-    <message>
-        <source>TOOL_TRANSFORMATION</source>
-        <translation>Transformation</translation>
-    </message>
-    <message>
-        <source>TOOL_BUILD</source>
-        <translation>Build</translation>
-    </message>
-    <message>
-        <source>TOOL_OPERATIONS</source>
-        <translation>Operations</translation>
-    </message>
-    <message>
-        <source>TOOL_PICTURES</source>
-        <translation>Pictures</translation>
-    </message>
-    <message>
-        <source>TOOL_ADVANCED</source>
-        <translation>Advanced</translation>
-    </message>
-    <message>
-        <source>TOOL_MEASURES</source>
-        <translation>Measures</translation>
-    </message>
     <message>
         <source>TOP_ARC</source>
         <translation>Create an arc</translation>
@@ -4093,10 +4216,6 @@ Please, select face, shell or solid and try again</translation>
         <source>TOP_EXPLODE_BLOCKS</source>
         <translation>Explode on Blocks</translation>
     </message>
-    <message>
-        <source>TOP_EXPORT</source>
-        <translation>Export geometry to BREP file</translation>
-    </message>
     <message>
         <source>TOP_EXTRUSION</source>
         <translation>Create an extrusion</translation>
@@ -4173,10 +4292,6 @@ Please, select face, shell or solid and try again</translation>
         <source>TOP_HEX_SOLID</source>
         <translation>Hexahedral Solid</translation>
     </message>
-    <message>
-        <source>TOP_IMPORT</source>
-        <translation>Import geometry from BREP file</translation>
-    </message>
     <message>
         <source>TOP_INERTIA</source>
         <translation>Moments of intertia</translation>
@@ -4355,7 +4470,7 @@ Please, select face, shell or solid and try again</translation>
     </message>
     <message>
         <source>TOP_SECTION</source>
-        <translation>Section</translation>
+        <translation>Intersection</translation>
     </message>
     <message>
         <source>TOP_SEWING</source>
@@ -4385,6 +4500,14 @@ Please, select face, shell or solid and try again</translation>
         <source>TOP_3DSKETCH</source>
         <translation>3D sketch</translation>
     </message>
+    <message>
+        <source>TOP_ISOLINE</source>
+        <translation>Isoline</translation>
+    </message>
+    <message>
+        <source>TOP_SURFACE_FROM_FACE</source>
+        <translation>Surface From Face</translation>
+    </message>
     <message>
         <source>TOP_SOLID</source>
         <translation>Build solid</translation>
@@ -4522,9 +4645,13 @@ Please, select face, shell or solid and try again</translation>
         <translation>Objects And Results</translation>
     </message>
     <message>
-        <source>GEOM_MEASURE_ANGLE_IS</source>
+        <source>GEOM_MEASURE_ANGLE_DEG</source>
         <translation>Angle in degrees :</translation>
     </message>
+    <message>
+        <source>GEOM_MEASURE_ANGLE_RAD</source>
+        <translation>Angle in radians :</translation>
+    </message>
     <message>
         <source>GEOM_LINE_INTERSECTION</source>
         <translation>Point On Lines Intersection</translation>
@@ -4543,32 +4670,36 @@ Please, select face, shell or solid and try again</translation>
     </message>
     <message>
         <source>GEOM_REMOVE_WEBS_TITLE</source>
-        <translation type="unfinished">Remove internal faces</translation>
+        <translation>Remove internal faces</translation>
     </message>
     <message>
         <source>GEOM_REMOVE_WEBS</source>
-        <translation type="unfinished">Compound of solids</translation>
+        <translation>Solids</translation>
     </message>
     <message>
         <source>REMOVE_WEBS_NEW_OBJ_NAME</source>
-        <translation type="unfinished">NoInternalFaces</translation>
+        <translation>NoInternalFaces</translation>
     </message>
     <message>
         <source>TOP_REMOVE_WEBS</source>
-        <translation type="unfinished">Remove internal faces</translation>
+        <translation>Remove internal faces</translation>
     </message>
     <message>
         <source>MEN_REMOVE_WEBS</source>
-        <translation type="unfinished">Remove Internal Faces</translation>
+        <translation>Remove Internal Faces</translation>
     </message>
     <message>
         <source>STB_REMOVE_WEBS</source>
-        <translation type="unfinished">Remove internal faces</translation>
+        <translation>Remove internal faces</translation>
     </message>
     <message>
         <source>GEOM_REMOVE_EXTRA_EDGES_TITLE</source>
         <translation>Remove extra edges</translation>
     </message>
+    <message>
+        <source>GEOM_BOOL_REMOVE_EXTRA_EDGES</source>
+        <translation>Remove extra edges</translation>
+    </message>
     <message>
         <source>GEOM_REMOVE_EXTRA_EDGES</source>
         <translation>Object to remove extra edges</translation>
@@ -4653,6 +4784,50 @@ Please, select face, shell or solid and try again</translation>
         <source>STB_MEASURE_ANGLE</source>
         <translation>Compute angle between two lines or linear edges</translation>
     </message>
+    <message>
+        <source>TOP_MANAGE_DIMENSIONS</source>
+        <translation>Manage dimensions</translation>
+    </message>
+    <message>
+        <source>MEN_MANAGE_DIMENSIONS</source>
+        <translation>Manage dimensions</translation>
+    </message>
+    <message>
+        <source>STB_MANAGE_DIMENSIONS</source>
+        <translation>Manage measurement dimensions of an object</translation>
+    </message>
+    <message>
+        <source>MEN_POP_SHOW_DEPENDENCY_TREE</source>
+        <translation>Show dependency tree</translation>
+    </message>
+    <message>
+        <source>MEN_POP_REDUCE_STUDY</source>
+        <translation>Reduce study</translation>
+    </message>
+    <message>
+        <source>MEN_POP_SHOW_ALL_DIMENSIONS</source>
+        <translation>Show all dimensions</translation>
+    </message>
+    <message>
+        <source>STB_POP_SHOW_ALL_DIMENSIONS</source>
+        <translation>Show all hidden measures (dimension) created for the object</translation>
+    </message>
+    <message>
+        <source>TOP_POP_SHOW_ALL_DIMENSIONS</source>
+        <translation>Show all hidden measures (dimension) created for the object</translation>
+    </message>
+    <message>
+        <source>MEN_POP_HIDE_ALL_DIMENSIONS</source>
+        <translation>Hide all dimensions</translation>
+    </message>
+    <message>
+        <source>STB_POP_HIDE_ALL_DIMENSIONS</source>
+        <translation>Show all visible measures (dimension) created for the object</translation>
+    </message>
+    <message>
+        <source>TOP_POP_HIDE_ALL_DIMENSIONS</source>
+        <translation>Show all visible measures (dimension) created for the object</translation>
+    </message>
     <message>
         <source>TOP_POP_AUTO_COLOR</source>
         <translation>Auto color</translation>
@@ -4877,6 +5052,18 @@ Please, select face, shell or solid and try again</translation>
         <source>STB_GET_SHARED_SHAPES</source>
         <translation>Get shared shapes</translation>
     </message>
+    <message>
+        <source>TOP_EXTENSION</source>
+        <translation>Extend Edge or Face</translation>
+    </message>
+    <message>
+        <source>MEN_EXTENSION</source>
+        <translation>Extension</translation>
+    </message>
+    <message>
+        <source>STB_EXTENSION</source>
+        <translation>Extend Edge or Face</translation>
+    </message>
     <message>
         <source>GEOM_PUBLISH_RESULT_GRP</source>
         <translation>Advanced options</translation>
@@ -4894,23 +5081,83 @@ Please, select face, shell or solid and try again</translation>
         <translation>Preview</translation>
     </message>
     <message>
-        <source>GEOM_ALL_IMPORT_FILES</source>
-        <translation>All supported formats ( %1 )</translation>
+        <source>PREF_TAB_DEPENDENCY_VIEW</source>
+        <translation>Dependency Tree</translation>
     </message>
     <message>
-        <source>GEOM_UNSUPPORTED_TYPE</source>
-        <translation>Unsupported format for the file</translation>
+        <source>PREF_HIERARCHY_TYPE</source>
+        <translation>Hierarchy type</translation>
     </message>
     <message>
-        <source>GEOM_UNKNOWN_IMPORT_ERROR</source>
-        <translation>Unknown error</translation>
+        <source>MEN_ONLY_ASCENDANTS</source>
+        <translation>Display only ascendants tree</translation>
     </message>
     <message>
-        <source>GEOM_IMPORT_ERRORS</source>
-        <translation>Import operation has finished with errors:</translation>
+        <source>MEN_ONLY_DESCENDANTS</source>
+        <translation>Display only descendants tree</translation>
     </message>
     <message>
-        <source>EXPORT_IGES_HETEROGENEOUS_COMPOUND</source>
+        <source>MEN_BOTH_ASCENDANTS_DESCENDANTS</source>
+        <translation>Display both ascendants and descendants trees</translation>
+    </message>
+    <message>
+        <source>GEOM_MOVE_POSSIBILITY</source>
+        <translation>Possibility to move nodes</translation>
+    </message>
+    <message>
+        <source>PREF_GROUP_DEPENDENCY_VIEW_COLOR</source>
+        <translation>Color</translation>
+    </message>
+    <message>
+        <source>PREF_DEPENDENCY_VIEW_BACKGROUND_COLOR</source>
+        <translation>Background color</translation>
+    </message>
+    <message>
+        <source>PREF_DEPENDENCY_VIEW_NODE_COLOR</source>
+        <translation>Default node color</translation>
+    </message>
+    <message>
+        <source>PREF_DEPENDENCY_VIEW_MAIN_NODE_COLOR</source>
+        <translation>Main node color</translation>
+    </message>
+    <message>
+        <source>PREF_DEPENDENCY_VIEW_UNPUBLISH_NODE_COLOR</source>
+        <translation>Unpublished node color</translation>
+    </message>
+    <message>
+        <source>PREF_DEPENDENCY_VIEW_SELECT_NODE_COLOR</source>
+        <translation>Selected node color</translation>
+    </message>
+    <message>
+        <source>PREF_DEPENDENCY_VIEW_ARROW_COLOR</source>
+        <translation>Default arrow color</translation>
+    </message>
+    <message>
+        <source>PREF_DEPENDENCY_VIEW_HIGHLIGHT_ARROW_COLOR</source>
+        <translation>Highlighted arrow color</translation>
+    </message>
+    <message>
+        <source>PREF_DEPENDENCY_VIEW_SELECT_ARROW_COLOR</source>
+        <translation>Selected arrow color</translation>
+    </message>
+    <message>
+        <source>GEOM_ALL_IMPORT_FILES</source>
+        <translation>All supported formats ( %1 )</translation>
+    </message>
+    <message>
+        <source>GEOM_UNSUPPORTED_TYPE</source>
+        <translation>Unsupported format for the file</translation>
+    </message>
+    <message>
+        <source>GEOM_UNKNOWN_IMPORT_ERROR</source>
+        <translation>Unknown error</translation>
+    </message>
+    <message>
+        <source>GEOM_IMPORT_ERRORS</source>
+        <translation>Import operation has finished with errors:</translation>
+    </message>
+    <message>
+        <source>EXPORT_IGES_HETEROGENEOUS_COMPOUND</source>
         <translation>This compound cannot be exported in IGES format
 without loss, because it contains entities, that must be saved in
 different modes. It is vertices, edges and wires on the one hand and
@@ -4920,11 +5167,6 @@ shells and solids on the other hand.</translation>
         <source>GEOM_PUBLISH_NAMED_SHAPES</source>
         <translation>Create groups for named shapes (if there are any)?</translation>
     </message>
-    <message>
-        <source>GEOM_SCALE_DIMENSIONS</source>
-        <translation>Take into account the units (%1) embedded to the file?
-Ignoring units will cause model scaling (as dimensions are supposed to be specified in meters).</translation>
-    </message>
     <message>
         <source>GEOM_PRECISION_HINT</source>
         <translation>Input value precision can be adjusted using
@@ -4948,59 +5190,130 @@ Ignoring units will cause model scaling (as dimensions are supposed to be specif
     </message>
     <message>
         <source>TOP_SMOOTHINGSURFACE</source>
-        <translation type="unfinished">Smoothing Surface</translation>
+        <translation>Smoothing Surface</translation>
     </message>
     <message>
         <source>GEOM_SELECT_IMAGE</source>
         <translation>Select image...</translation>
     </message>
     <message>
-        <source>MEN_IMPORTEXPORT</source>
-        <translation>Import / Export</translation>
+        <source>CC_PNT_ITEM_X_Y</source>
+        <translation>X=%1, Y=%2</translation>
     </message>
     <message>
-        <source>TOOL_IMPORTEXPORT</source>
-        <translation>Import / Export</translation>
+        <source>CC_PNT_ITEM_X_Y_Z</source>
+        <translation>X=%1, Y=%2, Z=%3</translation>
+    </message>
+    <message>
+        <source>GEOM_FILTER</source>
+        <translation>Filter</translation>
+    </message>
+    <message>
+        <source>GEOM_LESS_THAN</source>
+        <translation>Less Than</translation>
+    </message>
+    <message>
+        <source>GEOM_LESSOREQUAL_THAN</source>
+        <translation>Equal or Less Than</translation>
+    </message>
+    <message>
+        <source>GEOM_GREAT_THAN</source>
+        <translation>Greater Than</translation>
+    </message>
+    <message>
+        <source>GEOM_GREATOREQUAL_THAN</source>
+        <translation>Equal or Greater Than</translation>
+    </message>
+    <message>
+        <source>GEOM_SOME_SHAPES_SELECTED</source>
+        <translation>%1 shape(s) has(have) been selected</translation>
+    </message>
+    <message>
+        <source>GEOM_NO_SHAPES_SELECTED</source>
+        <translation>There are no shapes that meet filtering parameters</translation>
+    </message>
+    <message>
+        <source>GEOM_HEALING_STATS_TITLE</source>
+        <translation>What is done</translation>
+    </message>
+    <message>
+        <source>GEOM_HEALING_STATS_COL_1</source>
+        <translation>Count</translation>
+    </message>
+    <message>
+        <source>GEOM_HEALING_STATS_COL_2</source>
+        <translation>Modication</translation>
+    </message>
+</context>
+<context>
+    <name>GeometryGUI</name>
+    <message>
+        <source>TOOL_BASIC</source>
+        <translation>Basic</translation>
+    </message>
+    <message>
+        <source>TOOL_BLOCKS</source>
+        <translation>Blocks</translation>
     </message>
     <message>
-        <source>TOP_EXPORTXAO</source>
-        <translation>Export to XAO</translation>
+        <source>TOOL_BOOLEAN</source>
+        <translation>Boolean operations</translation>
     </message>
     <message>
-        <source>MEN_EXPORTXAO</source>
-        <translation>Export XAO</translation>
+        <source>TOOL_FEATURES</source>
+        <translation>Modification</translation>
     </message>
     <message>
-        <source>STB_EXPORTXAO</source>
-        <translation>Export shape to XAO format</translation>
+        <source>TOOL_GENERATION</source>
+        <translation>Generation</translation>
     </message>
     <message>
-        <source>TOP_IMPORTXAO</source>
-        <translation>Import from XAO</translation>
+        <source>TOOL_PRIMITIVES</source>
+        <translation>Primitives</translation>
     </message>
     <message>
-        <source>MEN_IMPORTXAO</source>
-        <translation>Import XAO</translation>
+        <source>TOOL_TRANSFORMATION</source>
+        <translation>Transformation</translation>
     </message>
     <message>
-        <source>STB_IMPORTXAO</source>
-        <translation>Import shape from XAO format</translation>
+        <source>TOOL_BUILD</source>
+        <translation>Build</translation>
     </message>
     <message>
-        <source>GEOM_IMPORTEXPORT_204</source>
-        <translation>Export XAO</translation>
+        <source>TOOL_OPERATIONS</source>
+        <translation>Operations</translation>
     </message>
     <message>
-        <source>GEOM_SELECT_EXPORT_XAO</source>
-        <translation>Export to XAO</translation>
+        <source>TOOL_PICTURES</source>
+        <translation>Pictures</translation>
     </message>
     <message>
-        <source>XAO_FILES</source>
-        <translation>XAO files (*.xao)</translation>
+        <source>TOOL_ADVANCED</source>
+        <translation>Advanced</translation>
     </message>
     <message>
-        <source>TOOLS_IMPORTEXPORT</source>
-        <translation>Import / Export</translation>
+        <source>TOOL_MEASURES</source>
+        <translation>Measures</translation>
+    </message>
+    <message>
+        <source>TOOL_IMPORTEXPORT</source>
+        <translation>Import / Export XAO</translation>
+    </message>
+    <message>
+        <source>TABLE_SECTION</source>
+        <translation>Section</translation>
+    </message>
+    <message>
+        <source>TABLE_INDEX</source>
+        <translation>Index</translation>
+    </message>
+    <message>
+        <source>TABLE_X</source>
+        <translation>X</translation>
+    </message>
+    <message>
+        <source>TABLE_Y</source>
+        <translation>Y</translation>
     </message>
 </context>
 <context>
@@ -5243,6 +5556,206 @@ Ignoring units will cause model scaling (as dimensions are supposed to be specif
         <translation>Face 2 V</translation>
     </message>
 </context>
+<context>
+    <name>CurveCreator_NewSectionDlg</name>
+    <message>
+        <source>SECTION_NAME</source>
+        <translation>Name</translation>
+    </message>
+    <message>
+        <source>SECTION_LINE_TYPE</source>
+        <translation>Type</translation>
+    </message>
+    <message>
+        <source>SECTION_POLYLINE_TYPE</source>
+        <translation>Polyline</translation>
+    </message>
+    <message>
+        <source>SECTION_SPLINE_TYPE</source>
+        <translation>Spline</translation>
+    </message>
+    <message>
+        <source>SECTION_LINE_CLOSED</source>
+        <translation>Closed</translation>
+    </message>
+    <message>
+        <source>SECTION_ADD_BTN</source>
+        <translation>Add</translation>
+    </message>
+    <message>
+        <source>SECTION_OK_BTN</source>
+        <translation>Ok</translation>
+    </message>
+    <message>
+        <source>SECTION_CANCEL_BTN</source>
+        <translation>Cancel</translation>
+    </message>
+    <message>
+        <source>ADD_NEW_SECTION</source>
+        <translation>Add new section</translation>
+    </message>
+    <message>
+        <source>SET_SECTION_PARAMETERS</source>
+        <translation>Set section parameters</translation>
+    </message>
+</context>
+<context>
+    <name>CurveCreator_TreeViewModel</name>
+    <message>
+        <source>X=%1, Y=%2</source>
+        <translation>X=%1, Y=%2</translation>
+    </message>
+    <message>
+        <source>X=%1, Y=%2, Z=%3</source>
+        <translation>X=%1, Y=%2, Z=%3</translation>
+    </message>
+</context>
+<context>
+    <name>CurveCreator_Widget</name>
+    <message>
+        <source>SECTION_GROUP_TITLE</source>
+        <translation>Sections</translation>
+    </message>
+    <message>
+        <source>UNDO</source>
+        <translation>Undo</translation>
+    </message>
+    <message>
+        <source>UNDO_TLT</source>
+        <translation>Undo</translation>
+    </message>
+    <message>
+        <source>REDO</source>
+        <translation>Redo</translation>
+    </message>
+    <message>
+        <source>REDO_TLT</source>
+        <translation>Redo</translation>
+    </message>
+    <message>
+        <source>NEW_SECTION</source>
+        <translation>New section</translation>
+    </message>
+    <message>
+        <source>NEW_SECTION_TLT</source>
+        <translation>Insert new section</translation>
+    </message>
+    <message>
+        <source>ADDITION_MODE</source>
+        <translation>Addition mode</translation>
+    </message>
+    <message>
+        <source>ADDITION_MODE_TLT</source>
+        <translation>Addition mode</translation>
+    </message>
+    <message>
+        <source>MODIFICATION_MODE</source>
+        <translation>Modification mode</translation>
+    </message>
+    <message>
+        <source>MODIFICATION_MODE_TLT</source>
+        <translation>Modification mode</translation>
+    </message>
+    <message>
+        <source>DETECTION_MODE</source>
+        <translation>Detection mode</translation>
+    </message>
+    <message>
+        <source>DETECTION_MODE_TLT</source>
+        <translation>Detection mode</translation>
+    </message>
+    <message>
+        <source>CLOSE_SECTIONS</source>
+        <translation>Set closed</translation>
+    </message>
+    <message>
+        <source>CLOSE_SECTIONS_TLT</source>
+        <translation>Set selected sections closed</translation>
+    </message>
+    <message>
+        <source>UNCLOSE_SECTIONS</source>
+        <translation>Set open</translation>
+    </message>
+    <message>
+        <source>UNCLOSE_SECTIONS_TLT</source>
+        <translation>Set selected sections open</translation>
+    </message>
+    <message>
+        <source>SET_SECTIONS_POLYLINE</source>
+        <translation>Set polyline</translation>
+    </message>
+    <message>
+        <source>SET_SECTIONS_POLYLINE_TLT</source>
+        <translation>Set selected section type to polyline</translation>
+    </message>
+    <message>
+        <source>SET_SECTIONS_SPLINE</source>
+        <translation>Set spline</translation>
+    </message>
+    <message>
+        <source>SET_SECTIONS_SPLINE_TLT</source>
+        <translation>Set selected section type to spline</translation>
+    </message>
+    <message>
+        <source>REMOVE</source>
+        <translation>Remove</translation>
+    </message>
+    <message>
+        <source>REMOVE_TLT</source>
+        <translation>Remove</translation>
+    </message>
+    <message>
+        <source>JOIN</source>
+        <translation>Join</translation>
+    </message>
+    <message>
+        <source>JOIN_TLT</source>
+        <translation>Join selected sections</translation>
+    </message>
+    <message>
+        <source>CLEAR_ALL</source>
+        <translation>Clear all</translation>
+    </message>
+    <message>
+        <source>CLEAR_ALL_TLT</source>
+        <translation>Remove all objects</translation>
+    </message>
+    <message>
+        <source>JOIN_ALL</source>
+        <translation>Join all sections</translation>
+    </message>
+    <message>
+        <source>JOIN_ALL_TLT</source>
+        <translation>Join all sections</translation>
+    </message>
+</context>
+<context>
+    <name>EntityGUI_PolylineDlg</name>
+    <message>
+        <source>POLYLINE_DLG_TITLE</source>
+        <translation>Polyline Construction</translation>
+    </message>
+    <message>
+        <source>POLYLINE_TITLE</source>
+        <translation>Polyline</translation>
+    </message>
+    <message>
+        <source>POLYLINE_NAME</source>
+        <translation>Polyline</translation>
+    </message>
+    <message>
+        <source>POLYLINE_IMPORT</source>
+        <translation>Import polyline</translation>
+    </message>
+    <message>
+        <source>POLYLINE_ADD_SECTION</source>
+        <translation>Add section</translation>
+    </message>
+    <message>
+        <source>POLYLINE_EDIT_SECTION</source>
+        <translation>Edit section</translation>
+    </message>
+</context>
 <context>
     <name>EntityGUI_SketcherDlg</name>
     <message>
@@ -5364,7 +5877,7 @@ Number of sketch points too small</translation>
     </message>
     <message>
         <source>LOWTHRESHOLD</source>
-        <translation>Low theshold</translation>
+        <translation>Low threshold</translation>
     </message>
     <message>
         <source>RATIO</source>
@@ -5586,7 +6099,7 @@ Number of sketch points too small</translation>
     </message>
     <message>
         <source>WRN_NOT_SUBSHAPE</source>
-        <translation type="unfinished">The selected shape is not a sub-shape of the main shape. Hide all extra shapes in the viewer for more suitable selection.</translation>
+        <translation>The selected shape is not a sub-shape of the main shape. Hide all extra shapes in the viewer for more suitable selection.</translation>
     </message>
 </context>
 <context>
@@ -5622,10 +6135,6 @@ Number of sketch points too small</translation>
         <source>DATA_TYPE</source>
         <translation>Type</translation>
     </message>
-    <message>
-        <source></source>
-        <translation></translation>
-    </message>
     <message>
         <source>BOOL</source>
         <translation>Boolean</translation>
@@ -5704,7 +6213,7 @@ Number of sketch points too small</translation>
     </message>
     <message>
         <source>GEOM_NO_STUDY</source>
-        <translation>No study availabel</translation>
+        <translation>No study available</translation>
     </message>
     <message>
         <source>NO_SHAPE</source>
@@ -5730,6 +6239,22 @@ Number of sketch points too small</translation>
         <source>WHOLE_SHAPE_VHEADER</source>
         <translation>Shape</translation>
     </message>
+    <message>
+        <source>RENAME_COMPONENT</source>
+        <translation>Change component name</translation>
+    </message>
+    <message>
+        <source>COMPONENT_NAME</source>
+        <translation>Name:</translation>
+    </message>
+    <message>
+        <source>WRN_NOT_SUBSHAPE</source>
+        <translation>The selected shape is not a sub-shape of the main shape. Hide all extra shapes in the viewer for more suitable selection.</translation>
+    </message>
+    <message>
+        <source>ERR_STEP_EXISTS</source>
+        <translation>Step with such ID already exists.</translation>
+    </message>
 </context>
 <context>
     <name>MeasureGUI_1Sel1TextView1Check_QTD</name>
@@ -5765,6 +6290,319 @@ Number of sketch points too small</translation>
         <translation>Z</translation>
     </message>
 </context>
+<context>
+    <name>MeasureGUI_ManageDimensionsDlg</name>
+    <message>
+        <source>MANAGE_DIMENSIONS_TITLE</source>
+        <translation>Manage dimensions</translation>
+    </message>
+    <message>
+        <source>OBJECT_LABEL</source>
+        <translation>Object</translation>
+    </message>
+    <message>
+        <source>DIMENSIONS_GROUP</source>
+        <translation>Dimensions</translation>
+    </message>
+    <message>
+        <source>ADD_BTN</source>
+        <translation>Add</translation>
+    </message>
+    <message>
+        <source>REMOVE_BTN</source>
+        <translation>Remove</translation>
+    </message>
+    <message>
+        <source>SHOW_ALL_BTN</source>
+        <translation>Show all</translation>
+    </message>
+    <message>
+        <source>HIDE_ALL_BTN</source>
+        <translation>Hide all</translation>
+    </message>
+    <message>
+        <source>DISTANCE_ITEM</source>
+        <translation>Distance</translation>
+    </message>
+    <message>
+        <source>DIAMETER_ITEM</source>
+        <translation>Diameter</translation>
+    </message>
+    <message>
+        <source>ANGLE_ITEM</source>
+        <translation>Angle</translation>
+    </message>
+    <message>
+        <source>WRN_TITLE_UNSAVED</source>
+        <translation>Unsaved changes</translation>
+    </message>
+    <message>
+        <source>WRN_MSG_CHANGES_LOST</source>
+        <translation>The unsaved changes will be lost.
+Do you wish to continue?</translation>
+    </message>
+    <message>
+        <source>WRN_MSG_CHANGES_SAVE</source>
+        <translation>The unsaved changes will be lost.
+Do you wish to save them?</translation>
+    </message>
+    <message>
+        <source>WRN_MSG_UNSAVED</source>
+        <translation>The unsaved changes will be lost.
+Do you want to continue?</translation>
+    </message>
+</context>
+<context>
+    <name>MeasureGUI_CreateDimensionDlg</name>
+    <message>
+        <source>CREATE_DIMENSION_TITLE</source>
+        <translation>Add dimension</translation>
+    </message>
+    <message>
+        <source>DIMENSIONS</source>
+        <translation>Dimensions</translation>
+    </message>
+    <message>
+        <source>LENGTH</source>
+        <translation>Length</translation>
+    </message>
+    <message>
+        <source>DIAMETER</source>
+        <translation>Diameter</translation>
+    </message>
+    <message>
+        <source>ANGLE</source>
+        <translation>Angle</translation>
+    </message>
+    <message>
+        <source>ARGUMENTS</source>
+        <translation>Arguments</translation>
+    </message>
+    <message>
+        <source>EDGE_LENGTH</source>
+        <translation>Edge length</translation>
+    </message>
+    <message>
+        <source>TWO_POINTS</source>
+        <translation>Two points</translation>
+    </message>
+    <message>
+        <source>PARALLEL_EDGES</source>
+        <translation>Parallel edges</translation>
+    </message>
+    <message>
+        <source>TWO_EDGES</source>
+        <translation>Two edges</translation>
+    </message>
+    <message>
+        <source>THREE_POINTS</source>
+        <translation>Three points</translation>
+    </message>
+    <message>
+        <source>EDGE</source>
+        <translation>Edge</translation>
+    </message>
+    <message>
+        <source>EDGE_1</source>
+        <translation>Edge 1</translation>
+    </message>
+    <message>
+        <source>EDGE_2</source>
+        <translation>Edge 2</translation>
+    </message>
+    <message>
+        <source>POINT_1</source>
+        <translation>Point 1</translation>
+    </message>
+    <message>
+        <source>POINT_2</source>
+        <translation>Point 2</translation>
+    </message>
+    <message>
+        <source>POINT_3</source>
+        <translation>Point 3</translation>
+    </message>
+    <message>
+        <source>OBJECT</source>
+        <translation>Object</translation>
+    </message>
+    <message>
+        <source>NAME_LENGTH</source>
+        <translation>Length</translation>
+    </message>
+    <message>
+        <source>NAME_DIAMETER</source>
+        <translation>Diameter</translation>
+    </message>
+    <message>
+        <source>NAME_ANGLE</source>
+        <translation>Angle</translation>
+    </message>
+    <message>
+        <source>WARNING_TITLE_CANNOT_CREATE_DIMENSION</source>
+        <translation>Can not create dimension</translation>
+    </message>
+    <message>
+        <source>WARNING_MSG_INVALID_ARGUMENTS</source>
+        <translation>The dimension can not be created for the specified arguments.
+Please specify suitable arguments.</translation>
+    </message>
+</context>
+<context>
+    <name>MeasureGUI_CheckShapeDlg</name>
+    <message>
+        <source>GEOM_CHECK_TITLE</source>
+        <translation>Check Shape Information</translation>
+    </message>
+    <message>
+        <source>GEOM_CHECK_SHAPE</source>
+        <translation>Check Shape</translation>
+    </message>
+    <message>
+        <source>GEOM_CHECK_SHAPE_NAME</source>
+        <translation>Faulty</translation>
+    </message>
+    <message>
+        <source>GEOM_CHECK_SHAPE_VALID</source>
+        <translation>This Shape seems to be valid</translation>
+    </message>
+    <message>
+        <source>GEOM_CHECK_SHAPE_NOT_VALID</source>
+        <translation>This Shape has errors:</translation>
+    </message>
+    <message>
+        <source>CHECK_ERROR_INVALID_POINT_ON_CURVE</source>
+        <translation>Invalid Point on Curve</translation>
+    </message>
+    <message>
+        <source>CHECK_ERROR_INVALID_POINT_ON_CURVE_ON_SURFACE</source>
+        <translation>Invalid Point on Curve on Surface</translation>
+    </message>
+    <message>
+        <source>CHECK_ERROR_INVALID_POINT_ON_SURFACE</source>
+        <translation>Invalid Point on Surface</translation>
+    </message>
+    <message>
+        <source>CHECK_ERROR_NO_3D_CURVE</source>
+        <translation>No 3D Curve</translation>
+    </message>
+    <message>
+        <source>CHECK_ERROR_MULTIPLE_3D_CURVE</source>
+        <translation>Multiple 3D Curve</translation>
+    </message>
+    <message>
+        <source>CHECK_ERROR_INVALID_3D_CURVE</source>
+        <translation>Invalid 3D Curve</translation>
+    </message>
+    <message>
+        <source>CHECK_ERROR_NO_CURVE_ON_SURFACE</source>
+        <translation>No Curve on Surface</translation>
+    </message>
+    <message>
+        <source>CHECK_ERROR_INVALID_CURVE_ON_SURFACE</source>
+        <translation>Invalid Curve on Surface</translation>
+    </message>
+    <message>
+        <source>CHECK_ERROR_INVALID_CURVE_ON_CLOSED_SURFACE</source>
+        <translation>Invalid Curve on Closed Surface</translation>
+    </message>
+    <message>
+        <source>CHECK_ERROR_INVALID_SAME_RANGE_FLAG</source>
+        <translation>Invalid Same Range Flag</translation>
+    </message>
+    <message>
+        <source>CHECK_ERROR_INVALID_SAME_PARAMETER_FLAG</source>
+        <translation>Invalid Same Parameter Flag</translation>
+    </message>
+    <message>
+        <source>CHECK_ERROR_INVALID_DEGENERATED_FLAG</source>
+        <translation>Invalid Degenerated Flag</translation>
+    </message>
+    <message>
+        <source>CHECK_ERROR_FREE_EDGE</source>
+        <translation>Free Edge</translation>
+    </message>
+    <message>
+        <source>CHECK_ERROR_INVALID_MULTI_CONNEXITY</source>
+        <translation>Invalid Multi Connexity</translation>
+    </message>
+    <message>
+        <source>CHECK_ERROR_INVALID_RANGE</source>
+        <translation>Invalid Range</translation>
+    </message>
+    <message>
+        <source>CHECK_ERROR_EMPTY_WIRE</source>
+        <translation>Empty Wire</translation>
+    </message>
+    <message>
+        <source>CHECK_ERROR_REDUNDANT_EDGE</source>
+        <translation>Redundant Edge</translation>
+    </message>
+    <message>
+        <source>CHECK_ERROR_SELF_INTERSECTING_WIRE</source>
+        <translation>Self-Intersecting Wire</translation>
+    </message>
+    <message>
+        <source>CHECK_ERROR_NO_SURFACE</source>
+        <translation>No Surface</translation>
+    </message>
+    <message>
+        <source>CHECK_ERROR_INVALID_WIRE</source>
+        <translation>Invalid Wire</translation>
+    </message>
+    <message>
+        <source>CHECK_ERROR_REDUNDANT_WIRE</source>
+        <translation>Redundant Wire</translation>
+    </message>
+    <message>
+        <source>CHECK_ERROR_INTERSECTING_WIRES</source>
+        <translation>Intersecting Wires</translation>
+    </message>
+    <message>
+        <source>CHECK_ERROR_INVALID_IMBRICATION_OF_WIRES</source>
+        <translation>Invalid Imbrication of Wires</translation>
+    </message>
+    <message>
+        <source>CHECK_ERROR_EMPTY_SHELL</source>
+        <translation>Empty Shell</translation>
+    </message>
+    <message>
+        <source>CHECK_ERROR_REDUNDANT_FACE</source>
+        <translation>Redundant Face</translation>
+    </message>
+    <message>
+        <source>CHECK_ERROR_UNORIENTABLE_SHAPE</source>
+        <translation>Unorientable Shape</translation>
+    </message>
+    <message>
+        <source>CHECK_ERROR_NOT_CLOSED</source>
+        <translation>Not Closed</translation>
+    </message>
+    <message>
+        <source>CHECK_ERROR_NOT_CONNECTED</source>
+        <translation>Not Connected</translation>
+    </message>
+    <message>
+        <source>CHECK_ERROR_SUBSHAPE_NOT_IN_SHAPE</source>
+        <translation>Subshape not in Shape</translation>
+    </message>
+    <message>
+        <source>CHECK_ERROR_BAD_ORIENTATION</source>
+        <translation>Bad Orientation</translation>
+    </message>
+    <message>
+        <source>CHECK_ERROR_BAD_ORIENTATION_OF_SUBSHAPE</source>
+        <translation>Bad Orientation of Subshape</translation>
+    </message>
+    <message>
+        <source>CHECK_ERROR_INVALID_TOLERANCE_VALUE</source>
+        <translation>Invalid Tolerance Value</translation>
+    </message>
+    <message>
+        <source>CHECK_ERROR_CHECK_FAIL</source>
+        <translation>Check Fail</translation>
+    </message>
+</context>
 <context>
     <name>OperationGUI_ChamferDlg</name>
     <message>
@@ -5878,6 +6716,18 @@ Please close this message box and select edges for gluing</translation>
         <translation>Enabling this option may result in a very time-consuming operation for some input shapes.
 Would you like to continue?</translation>
     </message>
+    <message>
+        <source>WIDTH_FACTOR_TOL</source>
+        <translation>Width factor tol.</translation>
+    </message>
+    <message>
+        <source>VOLUME_TOL</source>
+        <translation>Volume tol.</translation>
+    </message>
+    <message>
+        <source>TO_MERGE_SOLIDS</source>
+        <translation>To merge solids</translation>
+    </message>
 </context>
 <context>
     <name>GEOMToolsGUI_DeleteDlg</name>
@@ -6097,6 +6947,61 @@ Do you want to create new material?</translation>
         <translation>P&amp;ublish And Close</translation>
     </message>
 </context>
+<context>
+    <name>GEOMToolsGUI_ReduceStudyDlg</name>
+    <message>
+        <source>GEOM_REDUCE_STUDY_TITLE</source>
+        <translation>Reduce study</translation>
+    </message>
+    <message>
+        <source>GEOM_REDUCE_STUDY_KEPT_OBJECTS</source>
+        <translation>Objects to be kept</translation>
+    </message>
+    <message>
+        <source>GEOM_REDUCE_STUDY_REMOVE_OBJECTS</source>
+        <translation>Objects to be removed</translation>
+    </message>
+    <message>
+        <source>GEOM_REDUCE_STUDY_NAME</source>
+        <translation>Name</translation>
+    </message>
+    <message>
+        <source>GEOM_REDUCE_STUDY_OPTIONS</source>
+        <translation>Options</translation>
+    </message>
+    <message>
+        <source>GEOM_REDUCE_STUDY_INTERMEDIATES</source>
+        <translation>Intermediate objects</translation>
+    </message>
+    <message>
+        <source>GEOM_REDUCE_STUDY_SUB_OBJECTS</source>
+        <translation>Sub-objects</translation>
+    </message>
+    <message>
+        <source>GEOM_REDUCE_STUDY_KEEP</source>
+        <translation>Keep</translation>
+    </message>
+    <message>
+        <source>GEOM_REDUCE_STUDY_UNPUBLISH</source>
+        <translation>Unpublish</translation>
+    </message>
+    <message>
+        <source>GEOM_REDUCE_STUDY_REMOVE</source>
+        <translation>Remove</translation>
+    </message>
+    <message>
+        <source>GEOM_REDUCE_STUDY_REMOVE_EMPTY_FOLDER</source>
+        <translation>Remove empty folders</translation>
+    </message>
+    <message>
+        <source>GEOM_REDUCE_STUDY_SOFT_REMOVAL</source>
+        <translation>Soft removal</translation>
+    </message>
+    <message>
+        <source>GEOM_REDUCE_STUDY_WARNING_DELETE</source>
+        <translation>Do you really want to delete intermediate objects? After applying this operation study will be broken.</translation>
+    </message>
+</context>
 <context>
     <name>RepairGUI_UnionFacesDlg</name>
     <message>
@@ -6136,61 +7041,147 @@ Do you want to create new material?</translation>
     </message>
 </context>
 <context>
-    <name>ImportExportGUI_ExportXAODlg</name>
+    <name>EntityGUI_IsolineDlg</name>
     <message>
-        <source>GEOM_EXPORTXAO_TITLE</source>
-        <translation>Export XAO</translation>
+        <source>GEOM_ISOLINE_TITLE</source>
+        <translation>Isoline Construction</translation>
     </message>
     <message>
-        <source>GEOM_EXPORTXAO</source>
-        <translation>Export XAO</translation>
+        <source>GEOM_ISOLINE</source>
+        <translation>Isoline</translation>
     </message>
     <message>
-        <source>GEOM_EXPORTXAO_EXPORTINGSHAPE</source>
-        <translation>Shape</translation>
+        <source>GEOM_ISOLINE_U</source>
+        <translation>U-Isoline</translation>
     </message>
     <message>
-        <source>GEOM_EXPORTXAO_FILENAME</source>
-        <translation>File Name</translation>
+        <source>GEOM_ISOLINE_V</source>
+        <translation>V-Isoline</translation>
     </message>
+</context>
+<context>
+    <name>MeasureGUI_CheckSelfIntersectionsDlg</name>
     <message>
-        <source>GEOM_EXPORTXAO_AUTHOR</source>
-        <translation>Author</translation>
+        <source>GEOM_CHECK_INTE_INTERSECTIONS</source>
+        <translation>Self-intersections</translation>
     </message>
     <message>
-        <source>GEOM_EXPORTXAO_LGROUPS</source>
-        <translation>Groups</translation>
+        <source>GEOM_CHECK_INTE_SUBSHAPES</source>
+        <translation>Sub-shapes</translation>
+    </message>
+    <message>
+        <source>GEOM_CHECK_INTE_CHECK_LEVEL</source>
+        <translation>Level of check</translation>
+    </message>
+    <message>
+        <source>GEOM_CHECK_INTE_SUMMARY</source>
+        <translation>Summary</translation>
+    </message>
+    <message>
+        <source>GEOM_CHECK_INTE_COMPUTE</source>
+        <translation>Compute self-intersections</translation>
+    </message>
+    <message>
+        <source>GEOM_SELF_INTERSECTION_NAME</source>
+        <translation>Self_intersection</translation>
+    </message>
+    <message>
+        <source>GEOM_NO_SELF_INTERSECTIONS</source>
+        <translation>There are no self-intersections in the shape</translation>
+    </message>
+    <message>
+        <source>GEOM_SELF_INTERSECTIONS_FOUND</source>
+        <translation>Some self-intersections detected</translation>
+    </message>
+    <message>
+        <source>GEOM_CHECK_SELF_INTERSECTIONS_FAILED</source>
+        <translation>Detection of self-intersections failed</translation>
+    </message>
+    <message>
+        <source>GEOM_CHECK_SELF_INTERSECTIONS_ERRORS</source>
+        <translation>Warning: there were errors during the operation, so the list may be incomplete.</translation>
+    </message>
+    <message>
+        <source>GEOM_CHECK_INTE_V_V</source>
+        <translation>Vertex to Vertex</translation>
     </message>
     <message>
-        <source>GEOM_EXPORTXAO_LFIELDS</source>
-        <translation>Fields</translation>
+        <source>GEOM_CHECK_INTE_V_E</source>
+        <translation>Vertex to Edge + all above</translation>
     </message>
+  <message>
+    <source>GEOM_CHECK_INTE_E_E</source>
+    <translation>Edge to Edge + all above</translation>
+  </message>
+  <message>
+    <source>GEOM_CHECK_INTE_V_F</source>
+    <translation>Vertex to Face + all above</translation>
+  </message>
+  <message>
+    <source>GEOM_CHECK_INTE_E_F</source>
+    <translation>Edge to Face + all above</translation>
+  </message>
+  <message>
+    <source>GEOM_CHECK_INTE_ALL</source>
+    <translation>All interferences</translation>
+  </message>
 </context>
 <context>
-    <name>ImportExportGUI_ImportXAODlg</name>
+    <name>TransformationGUI_ExtensionDlg</name>
     <message>
-        <source>GEOM_IMPORTXAO_TITLE</source>
-        <translation>Import XAO</translation>
+        <source>GEOM_EXTENSION_TITLE</source>
+        <translation>Extension of Edge or Face</translation>
     </message>
     <message>
-        <source>GEOM_IMPORTXAO</source>
-        <translation>Import XAO</translation>
+        <source>GEOM_EXTENSION</source>
+        <translation>Extension</translation>
     </message>
     <message>
-        <source>GEOM_IMPORTXAO_IMPORTINGSHAPE</source>
-        <translation>Shape</translation>
+        <source>GEOM_EXTENSION_MIN</source>
+        <translation>First Parameter</translation>
     </message>
     <message>
-        <source>GEOM_IMPORTXAO_FILENAME</source>
-        <translation>File Name</translation>
+        <source>GEOM_EXTENSION_MAX</source>
+        <translation>Last Parameter</translation>
     </message>
     <message>
-        <source>GEOM_IMPORTXAO_LGROUPS</source>
-        <translation>Groups</translation>
+        <source>GEOM_EXTENSION_MIN_U</source>
+        <translation>First U-Parameter</translation>
+    </message>
+    <message>
+        <source>GEOM_EXTENSION_MAX_U</source>
+        <translation>Last U-Parameter</translation>
+    </message>
+    <message>
+        <source>GEOM_EXTENSION_MIN_V</source>
+        <translation>First V-Parameter</translation>
+    </message>
+    <message>
+        <source>GEOM_EXTENSION_MAX_V</source>
+        <translation>Last V-Parameter</translation>
+    </message>
+    <message>
+        <source>GEOM_EXTENSION_EDGE_NAME</source>
+        <translation>ExtendedEdge</translation>
+    </message>
+    <message>
+        <source>GEOM_EXTENSION_FACE_NAME</source>
+        <translation>ExtendedFace</translation>
+    </message>
+</context>
+<context>
+    <name>EntityGUI_SurfFromFaceDlg</name>
+    <message>
+        <source>GEOM_SURF_FROM_FACE_TITLE</source>
+        <translation>Surface From Face Construction</translation>
+    </message>
+    <message>
+        <source>GEOM_SURF_FROM_FACE</source>
+        <translation>Surface From Face</translation>
     </message>
     <message>
-        <source>GEOM_IMPORTXAO_LFIELDS</source>
-        <translation>Fields</translation>
+        <source>GEOM_SURF_FROM_FACE_NAME</source>
+        <translation>SurfaceFromFace</translation>
     </message>
 </context>
 </TS>