Remove redundant code

[modules/geom.git] / src / GEOMGUI / GEOM_msg_en.ts

diff --git a/src/GEOMGUI/GEOM_msg_en.ts b/src/GEOMGUI/GEOM_msg_en.ts
index b710fb019e7e94ae8a816a17f9ceaa04fabf176d..72fb131e156fdd511135e59ee76e34c1522f6911 100644 (file)
--- a/src/GEOMGUI/GEOM_msg_en.ts
+++ b/src/GEOMGUI/GEOM_msg_en.ts
@@ -38,6 +38,14 @@ Do you still want to delete these objects?</translation>
         <source>DEVIDE_EDGE_NEW_OBJECT_NAME</source>
         <translation>NewObject</translation>
     </message>
+    <message>
+        <source>DEVIDE_EDGE_BAD_PROJ_MSG</source>
+        <translation>Projection outside the edge</translation>
+    </message>
+    <message>
+        <source>DEVIDE_EDGE_BY_PROJ_POINT</source>
+        <translation>Points to project</translation>
+    </message>
     <message>
         <source>ERROR_SHAPE_TYPE</source>
         <translation>Object of incorrect type selected!
@@ -407,6 +415,10 @@ Please, select face, shell or solid and try again</translation>
         <source>GEOM_NONBLOCKS</source>
         <translation>NonBlocksGroup</translation>
     </message>
+    <message>
+        <source>GEOM_USE_C1_CRITERION</source>
+        <translation>Use C1 criterion</translation>
+    </message>
     <message>
         <source>GEOM_CHECK_INFOS</source>
         <translation>Object And Its Topological Information</translation>
@@ -415,6 +427,10 @@ Please, select face, shell or solid and try again</translation>
         <source>GEOM_CHECK_SELF_INTERSECTIONS</source>
         <translation>Detect Self-intersections</translation>
     </message>
+    <message>
+        <source>GEOM_FAST_CHECK_INTERSECTIONS</source>
+        <translation>Fast intersection</translation>
+    </message>
     <message>
         <source>GEOM_CIRCLE</source>
         <translation>Circle</translation>
@@ -521,7 +537,7 @@ Please, select face, shell or solid and try again</translation>
     </message>
     <message>
         <source>GEOM_CYLINDER_ANGLE_ERR</source>
-        <translation>Angle values 0 and 360 are unsafe to build proper volumes. Please uncheck the "Angle" box to use the regular cylinder constructor.</translation>
+        <translation>Angle values 0 and 360 are unsafe to build proper volumes. Please uncheck the &quot;Angle&quot; box to use the regular cylinder constructor.</translation>
     </message>
     <message>
         <source>GEOM_D1</source>
@@ -561,7 +577,7 @@ Please, select face, shell or solid and try again</translation>
     </message>
     <message>
         <source>GEOM_DIVIDE_EDGE_TITLE</source>
-        <translation>Addition of point</translation>
+        <translation>Addition of points</translation>
     </message>
     <message>
         <source>GEOM_DX</source>
@@ -659,6 +675,18 @@ Please, select face, shell or solid and try again</translation>
         <source>GEOM_EXTRUSION_TITLE</source>
         <translation>Construction by Extrusion</translation>
     </message>
+    <message>
+        <source>GEOM_THICKNESS_TITLE</source>
+        <translation>Thickness Construction</translation>
+    </message>
+    <message>
+        <source>GEOM_THICKNESS_NAME</source>
+        <translation>Thickness</translation>
+    </message>
+    <message>
+        <source>GEOM_TOWARDS_INSIDE</source>
+        <translation>Thicken towards the inside</translation>
+    </message>
     <message>
         <source>GEOM_SCALE_PRISM</source>
         <translation>Scale the face opposite to the base</translation>
@@ -691,10 +719,30 @@ Please, select face, shell or solid and try again</translation>
         <source>GEOM_FACE_FFW</source>
         <translation>Face creation from wires and/or edges</translation>
     </message>
+    <message>
+        <source>GEOM_FACE_FROM_SURFACE</source>
+        <translation>Face creation from surface bounded by wire</translation>
+    </message>
     <message>
         <source>GEOM_FACE_OPT</source>
         <translation>Try to create a planar face</translation>
     </message>
+    <message>
+        <source>GEOM_FACE_FFWC</source>
+        <translation>Face creation from wire and constraints</translation>
+    </message>
+    <message>
+        <source>GEOM_CONSTRAINTS</source>
+        <translation>Constraints</translation>
+    </message>
+    <message>
+        <source>GEOM_FACE_CONSTRAINT</source>
+        <translation>Constraint Face</translation>
+    </message>
+    <message>
+        <source>GEOM_SOLID_FROM_FACE_OPT</source>
+        <translation>Intersect/sew shapes</translation>
+    </message>
     <message>
         <source>MAKE_FACE_TOLERANCE_TOO_BIG</source>
         <translation>Cannot build a planar face: required tolerance is
@@ -1197,17 +1245,49 @@ Please, select face, shell or solid and try again</translation>
         <translation>Division pattern</translation>
     </message>
     <message>
-        <source>GEOM_PROJECTION</source>
-        <translation>Projection</translation>
+        <source>GEOM_PROJECTION_ON_FACE</source>
+        <translation>Projection on Face</translation>
+    </message>
+    <message>
+        <source>GEOM_PROJECTION_ON_WIRE</source>
+        <translation>Projection on Wire</translation>
+    </message>
+    <message>
+        <source>GEOM_PROJECTION_ON_EDGE</source>
+        <translation>Projection on Edge</translation>
     </message>
     <message>
         <source>GEOM_PROJECTION_TITLE</source>
-        <translation>Projection on Face</translation>
+        <translation>Projection</translation>
+    </message>
+    <message>
+        <source>GEOM_PROJECTION_NAME</source>
+        <translation>Projection</translation>
     </message>
     <message>
-        <source>GEOM_SOURCE_OBJECT</source>
+        <source>GEOM_PROJ_ON_FACE_SOURCE</source>
         <translation>Source vertex, edge or wire</translation>
     </message>
+    <message>
+        <source>GEOM_PROJ_ON_FACE_TARGET</source>
+        <translation>Target face</translation>
+    </message>
+    <message>
+        <source>GEOM_PROJ_ON_WIRE_SOURCE</source>
+        <translation>Source vertex</translation>
+    </message>
+    <message>
+        <source>GEOM_PROJ_ON_WIRE_TARGET</source>
+        <translation>Target wire</translation>
+    </message>
+    <message>
+        <source>GEOM_PROJ_ON_EDGE_SOURCE</source>
+        <translation>Source vertex</translation>
+    </message>
+    <message>
+        <source>GEOM_PROJ_ON_EDGE_TARGET</source>
+        <translation>Target edge</translation>
+    </message>
     <message>
         <source>GEOM_SOLUTION</source>
         <translation>Solution :</translation>
@@ -1216,10 +1296,6 @@ Please, select face, shell or solid and try again</translation>
         <source>GEOM_SOLUTION_I</source>
         <translation>Solution %1</translation>
     </message>
-    <message>
-        <source>GEOM_TARGET_OBJECT</source>
-        <translation>Target face</translation>
-    </message>
     <message>
         <source>GEOM_WITH_CONTACT</source>
         <translation>With contact</translation>
@@ -1336,6 +1412,14 @@ Please, select face, shell or solid and try again</translation>
         <source>GEOM_SELECT_UNPUBLISHED_EDGES</source>
         <translation>Select unpublished edges</translation>
     </message>
+    <message>
+        <source>GEOM_GENERATE_GROUPS</source>
+        <translation>Generate Groups</translation>
+    </message>
+    <message>
+        <source>GEOM_GROUP_NAME_PREFIX</source>
+        <translation>Group Names Prefix</translation>
+    </message>
     <message>
         <source>GEOM_PLANE</source>
         <translation>Plane</translation>
@@ -1634,11 +1718,11 @@ Please, select face, shell or solid and try again</translation>
     </message>
     <message>
         <source>GEOM_SECTION</source>
-        <translation>Section</translation>
+        <translation>Intersection</translation>
     </message>
     <message>
         <source>GEOM_SECTION_TITLE</source>
-        <translation>Section Of Two Objects</translation>
+        <translation>Intersection Of Two Objects</translation>
     </message>
     <message>
         <source>GEOM_SELECTED_FACE</source>
@@ -1932,6 +2016,14 @@ Please, select face, shell or solid and try again</translation>
         <source>GEOM_SOLID_TITLE</source>
         <translation>Solid Construction</translation>
     </message>
+    <message>
+        <source>GEOM_SOLID_SHELLS</source>
+        <translation>Make Solid From Shells</translation>
+    </message>
+    <message>
+        <source>GEOM_SOLID_FACES</source>
+        <translation>Make Solid From Connected Set Of Faces/Shells</translation>
+    </message>
     <message>
         <source>GEOM_SPHERE</source>
         <translation>Sphere</translation>
@@ -2058,7 +2150,7 @@ Please, select face, shell or solid and try again</translation>
     </message>
     <message>
         <source>GEOM_SUPRESSFACE</source>
-        <translation>Supress Face</translation>
+        <translation>Suppress Face</translation>
     </message>
     <message>
         <source>GEOM_SUPRESSFACE_SELECT</source>
@@ -2336,6 +2428,26 @@ Please, select face, shell or solid and try again</translation>
         <source>WRN_NULL_OBJECT_OR_SHAPE</source>
         <translation>Shape %1 for solid creation is null</translation>
     </message>
+    <message>
+        <source>GROUP_DOWN</source>
+        <translation>Down</translation>
+    </message>
+    <message>
+        <source>GROUP_UP</source>
+        <translation>Up</translation>
+    </message>
+    <message>
+        <source>GROUP_SIDE1</source>
+        <translation>Side1</translation>
+    </message>
+    <message>
+        <source>GROUP_SIDE2</source>
+        <translation>Side2</translation>
+    </message>
+    <message>
+        <source>GROUP_OTHER</source>
+        <translation>Other</translation>
+    </message>
     <message>
         <source>GEOM_X</source>
         <translation>X :</translation>
@@ -2361,12 +2473,12 @@ Please, select face, shell or solid and try again</translation>
         <translation>2D Polyline</translation>
     </message>
     <message>
-      <source>TOP_CURVE_CREATOR</source>
-      <translation>Create 2D polyline</translation>
+        <source>TOP_CURVE_CREATOR</source>
+        <translation>Create 2D polyline</translation>
     </message>
     <message>
-      <source>STB_CURVE_CREATOR</source>
-      <translation>Create 2D polyline</translation>
+        <source>STB_CURVE_CREATOR</source>
+        <translation>Create 2D polyline</translation>
     </message>
     <message>
         <source>MEN_ALL_SEL_ONLY</source>
@@ -2440,6 +2552,10 @@ Please, select face, shell or solid and try again</translation>
         <source>MEN_CHECK_SELF_INTERSECTIONS</source>
         <translation>Detect Self-intersections</translation>
     </message>
+    <message>
+        <source>MEN_FAST_CHECK_INTERSECTIONS</source>
+        <translation>Fast intersection</translation>
+    </message>
     <message>
         <source>MEN_CHECK_FREE_BNDS</source>
         <translation>Check Free Boundaries</translation>
@@ -2760,6 +2876,10 @@ Please, select face, shell or solid and try again</translation>
         <source>MEN_PROJECTION</source>
         <translation>Projection</translation>
     </message>
+    <message>
+        <source>MEN_PROJ_ON_CYL</source>
+        <translation>Projection on Cylinder</translation>
+    </message>
     <message>
         <source>MEN_OPERATIONS</source>
         <translation>Operations</translation>
@@ -2780,6 +2900,10 @@ Please, select face, shell or solid and try again</translation>
         <source>MEN_PIPE_PATH</source>
         <translation>Restore Path</translation>
     </message>
+    <message>
+        <source>MEN_THICKNESS</source>
+        <translation>Thickness</translation>
+    </message>
     <message>
         <source>MEN_PLANE</source>
         <translation>Plane</translation>
@@ -2896,6 +3020,10 @@ Please, select face, shell or solid and try again</translation>
         <source>MEN_POP_VERTICES</source>
         <translation>Show Vertices</translation>
     </message>
+    <message>
+        <source>MEN_POP_SHOW_NAME</source>
+        <translation>Show Name</translation>
+    </message>
     <message>
         <source>MEN_PREFERENCES</source>
         <translation>Preferences</translation>
@@ -2938,7 +3066,7 @@ Please, select face, shell or solid and try again</translation>
     </message>
     <message>
         <source>MEN_SECTION</source>
-        <translation>Section</translation>
+        <translation>Intersection</translation>
     </message>
     <message>
         <source>MEN_SELECT_ONLY</source>
@@ -2984,10 +3112,18 @@ Please, select face, shell or solid and try again</translation>
         <source>MEN_ISOLINE</source>
         <translation>Isoline</translation>
     </message>
+    <message>
+        <source>MEN_SURFACE_FROM_FACE</source>
+        <translation>Surface From Face</translation>
+    </message>
     <message>
         <source>MEN_SOLID</source>
         <translation>Solid</translation>
     </message>
+    <message>
+        <source>MEN_SOLID_FROM_FACES</source>
+        <translation>Solid from connected faces</translation>
+    </message>
     <message>
         <source>MEN_SOLID_SEL_ONLY</source>
         <translation>Solid</translation>
@@ -3076,6 +3212,14 @@ Please, select face, shell or solid and try again</translation>
         <source>MEN_VERTICES_MODE_OFF</source>
         <translation>Hide Vertices</translation>
     </message>
+    <message>
+        <source>MEN_NAME_MODE_ON</source>
+        <translation>Show Name</translation>
+    </message>
+    <message>
+        <source>MEN_NAME_MODE_OFF</source>
+        <translation>Hide Name</translation>
+    </message>
     <message>
         <source>MEN_WIREFRAME</source>
         <translation>Wireframe</translation>
@@ -3100,6 +3244,14 @@ Please, select face, shell or solid and try again</translation>
         <source>MEN_POP_PREDEF_MATER_CUSTOM</source>
         <translation>Custom...</translation>
     </message>
+    <message>
+        <source>MEN_EDGE_EXTEND</source>
+        <translation>Extended Edge</translation>
+    </message>
+    <message>
+        <source>MEN_FACE_EXTEND</source>
+        <translation>Extended Face</translation>
+    </message>
     <message>
         <source>NAME_LBL</source>
         <translation>Name: </translation>
@@ -3110,7 +3262,7 @@ Please, select face, shell or solid and try again</translation>
     </message>
     <message>
         <source>PREF_DEFLECTION</source>
-        <translation>Deflection coefficient</translation>
+        <translation>Default deflection coefficient</translation>
     </message>
     <message>
         <source>GEOM_PREF_def_precision</source>
@@ -3158,7 +3310,7 @@ Please, select face, shell or solid and try again</translation>
     </message>
     <message>
         <source>PREF_TRANSPARENCY</source>
-        <translation>Transparency</translation>
+        <translation>Default transparency</translation>
     </message>
     <message>
         <source>PREF_FREE_BOUND_COLOR</source>
@@ -3182,12 +3334,16 @@ Please, select face, shell or solid and try again</translation>
     </message>
     <message>
         <source>PREF_GROUP_VERTEX</source>
-        <translation>Marker of Points</translation>
+        <translation>Default marker of points</translation>
     </message>
     <message>
         <source>PREF_ISOS_COLOR</source>
         <translation>Color of isolines</translation>
     </message>
+    <message>
+        <source>PREF_LABEL_COLOR</source>
+        <translation>Color of labels</translation>
+    </message>
     <message>
         <source>PREF_TOPLEVEL_COLOR</source>
         <translation>Top level color</translation>
@@ -3258,11 +3414,11 @@ Please, select face, shell or solid and try again</translation>
     </message>
     <message>
         <source>PREF_EDGE_WIDTH</source>
-        <translation>Edges width</translation>
+        <translation>Default edges width</translation>
     </message>
     <message>
         <source>PREF_ISOLINES_WIDTH</source>
-        <translation>Iso lines width</translation>
+        <translation>Default isolines width</translation>
     </message>
     <message>
         <source>PREF_PREVIEW_EDGE_WIDTH</source>
@@ -3312,9 +3468,13 @@ Please, select face, shell or solid and try again</translation>
         <source>PREF_DIMENSIONS_SHOW_UNITS</source>
         <translation>Show units of measurement</translation>
     </message>
+    <message>
+        <source>PREF_HIDE_INPUT_OBJECT</source>
+        <translation>Hide input objects from the viewer</translation>
+    </message>
     <message>
         <source>PREF_ISOS</source>
-        <translation>Number of isolines</translation>
+        <translation>Default number of isolines</translation>
     </message>
     <message>
         <source>PREF_ISOS_U</source>
@@ -3362,7 +3522,7 @@ Please, select face, shell or solid and try again</translation>
     </message>
     <message>
         <source>REMOVE_HOLES_NEW_OBJ_NAME</source>
-        <translation>SupressHoles</translation>
+        <translation>SuppressHoles</translation>
     </message>
     <message>
         <source>REMOVE_INT_WIRES_NEW_OBJ_NAME</source>
@@ -3428,6 +3588,10 @@ Please, select face, shell or solid and try again</translation>
         <source>STB_CHECK_SELF_INTERSECTIONS</source>
         <translation>Detect Self-intersections</translation>
     </message>
+    <message>
+        <source>STB_FAST_CHECK_INTERSECTIONS</source>
+        <translation>Fast intersection</translation>
+    </message>
     <message>
         <source>STB_CHECK_FREE_BNDS</source>
         <translation>Check free boundaries</translation>
@@ -3676,6 +3840,10 @@ Please, select face, shell or solid and try again</translation>
         <source>STB_PROJECTION</source>
         <translation>Project a point, an edge or a wire on a face</translation>
     </message>
+    <message>
+        <source>STB_PROJ_ON_CYL</source>
+        <translation>Project a wire or a face on a cylinder</translation>
+    </message>
     <message>
         <source>STB_ORIGIN_AND_VECTORS</source>
         <translation>Create an origin and base Vectors</translation>
@@ -3692,6 +3860,10 @@ Please, select face, shell or solid and try again</translation>
         <source>STB_PIPE_PATH</source>
         <translation>Restore path from a pipe-like shape</translation>
     </message>
+    <message>
+        <source>STB_THICKNESS</source>
+        <translation>Make a thick solid</translation>
+    </message>
     <message>
         <source>STB_PLANE</source>
         <translation>Create a plane</translation>
@@ -3768,6 +3940,10 @@ Please, select face, shell or solid and try again</translation>
         <source>STB_POP_VERTICES</source>
         <translation>Show Vertices</translation>
     </message>
+    <message>
+        <source>STB_POP_SHOW_NAME</source>
+        <translation>Show Name</translation>
+    </message>
     <message>
         <source>STB_POP_SETTEXTURE</source>
         <translation>Add a texture</translation>
@@ -3810,7 +3986,7 @@ Please, select face, shell or solid and try again</translation>
     </message>
     <message>
         <source>STB_SECTION</source>
-        <translation>Section</translation>
+        <translation>Intersection</translation>
     </message>
     <message>
         <source>STB_SEWING</source>
@@ -3832,6 +4008,10 @@ Please, select face, shell or solid and try again</translation>
         <source>STB_VECTOR_MODE</source>
         <translation>Change Edge Presentation Mode</translation>
     </message>
+    <message>
+        <source>STB_NAME_MODE</source>
+        <translation>Show/Hide names of visible shapes</translation>
+    </message>
     <message>
         <source>STB_SHADING_COLOR</source>
         <translation>Set shading color</translation>
@@ -3860,6 +4040,10 @@ Please, select face, shell or solid and try again</translation>
         <source>STB_ISOLINE</source>
         <translation>Create U- or V-Isoline</translation>
     </message>
+    <message>
+        <source>STB_SURFACE_FROM_FACE</source>
+        <translation>Create a Surface From Face</translation>
+    </message>
     <message>
         <source>STB_SOLID</source>
         <translation>Build a solid</translation>
@@ -3938,7 +4122,7 @@ Please, select face, shell or solid and try again</translation>
     </message>
     <message>
         <source>SUPRESS_FACE_NEW_OBJ_NAME</source>
-        <translation>SupressFaces</translation>
+        <translation>SuppressFaces</translation>
     </message>
     <message>
         <source>ShHealOper_ErrorExecution_msg</source>
@@ -4036,6 +4220,10 @@ Please, select face, shell or solid and try again</translation>
         <source>TOP_CHECK_SELF_INTERSECTIONS</source>
         <translation>Detect Self-intersections</translation>
     </message>
+    <message>
+        <source>TOP_FAST_CHECK_INTERSECTIONS</source>
+        <translation>Fast intersection</translation>
+    </message>
     <message>
         <source>TOP_CHECK_FREE_BNDS</source>
         <translation>Check free boundaries</translation>
@@ -4276,6 +4464,10 @@ Please, select face, shell or solid and try again</translation>
         <source>TOP_PROJECTION</source>
         <translation>Projection</translation>
     </message>
+    <message>
+        <source>TOP_PROJ_ON_CYL</source>
+        <translation>Projection on Cylinder</translation>
+    </message>
     <message>
         <source>TOP_ORIGIN_AND_VECTORS</source>
         <translation>Create an origin and base Vectors</translation>
@@ -4292,6 +4484,10 @@ Please, select face, shell or solid and try again</translation>
         <source>TOP_PIPE_PATH</source>
         <translation>Restore path</translation>
     </message>
+    <message>
+        <source>TOP_THICKNESS</source>
+        <translation>Thickness</translation>
+    </message>
     <message>
         <source>TOP_PLANE</source>
         <translation>Create a plane</translation>
@@ -4390,7 +4586,7 @@ Please, select face, shell or solid and try again</translation>
     </message>
     <message>
         <source>TOP_SECTION</source>
-        <translation>Section</translation>
+        <translation>Intersection</translation>
     </message>
     <message>
         <source>TOP_SEWING</source>
@@ -4424,6 +4620,10 @@ Please, select face, shell or solid and try again</translation>
         <source>TOP_ISOLINE</source>
         <translation>Isoline</translation>
     </message>
+    <message>
+        <source>TOP_SURFACE_FROM_FACE</source>
+        <translation>Surface From Face</translation>
+    </message>
     <message>
         <source>TOP_SOLID</source>
         <translation>Build solid</translation>
@@ -4676,6 +4876,18 @@ Please, select face, shell or solid and try again</translation>
         <source>STB_UNION_FACES</source>
         <translation>Union faces</translation>
     </message>
+    <message>
+        <source>TOP_INSPECT_OBJECT</source>
+        <translation>Inspect Object</translation>
+    </message>
+    <message>
+        <source>MEN_INSPECT_OBJECT</source>
+        <translation>Inspect Object</translation>
+    </message>
+    <message>
+        <source>STB_INSPECT_OBJECT</source>
+        <translation>Inspect Object</translation>
+    </message>
     <message>
         <source>TOP_NORMALE</source>
         <translation>Normal to a face</translation>
@@ -4968,6 +5180,30 @@ Please, select face, shell or solid and try again</translation>
         <source>STB_GET_SHARED_SHAPES</source>
         <translation>Get shared shapes</translation>
     </message>
+    <message>
+        <source>TOP_TRANSFER_DATA</source>
+        <translation>Transfer Data</translation>
+    </message>
+    <message>
+        <source>MEN_TRANSFER_DATA</source>
+        <translation>Transfer Data</translation>
+    </message>
+    <message>
+        <source>STB_TRANSFER_DATA</source>
+        <translation>Transfer Data</translation>
+    </message>
+    <message>
+        <source>TOP_EXTENSION</source>
+        <translation>Extend Edge or Face</translation>
+    </message>
+    <message>
+        <source>MEN_EXTENSION</source>
+        <translation>Extension</translation>
+    </message>
+    <message>
+        <source>STB_EXTENSION</source>
+        <translation>Extend Edge or Face</translation>
+    </message>
     <message>
         <source>GEOM_PUBLISH_RESULT_GRP</source>
         <translation>Advanced options</translation>
@@ -5108,6 +5344,46 @@ shells and solids on the other hand.</translation>
         <source>CC_PNT_ITEM_X_Y_Z</source>
         <translation>X=%1, Y=%2, Z=%3</translation>
     </message>
+    <message>
+        <source>GEOM_FILTER</source>
+        <translation>Filter</translation>
+    </message>
+    <message>
+        <source>GEOM_LESS_THAN</source>
+        <translation>Less Than</translation>
+    </message>
+    <message>
+        <source>GEOM_LESSOREQUAL_THAN</source>
+        <translation>Equal or Less Than</translation>
+    </message>
+    <message>
+        <source>GEOM_GREAT_THAN</source>
+        <translation>Greater Than</translation>
+    </message>
+    <message>
+        <source>GEOM_GREATOREQUAL_THAN</source>
+        <translation>Equal or Greater Than</translation>
+    </message>
+    <message>
+        <source>GEOM_SOME_SHAPES_SELECTED</source>
+        <translation>%1 shape(s) has(have) been selected</translation>
+    </message>
+    <message>
+        <source>GEOM_NO_SHAPES_SELECTED</source>
+        <translation>There are no shapes that meet filtering parameters</translation>
+    </message>
+    <message>
+        <source>GEOM_HEALING_STATS_TITLE</source>
+        <translation>What is done</translation>
+    </message>
+    <message>
+        <source>GEOM_HEALING_STATS_COL_1</source>
+        <translation>Count</translation>
+    </message>
+    <message>
+        <source>GEOM_HEALING_STATS_COL_2</source>
+        <translation>Modification</translation>
+    </message>
 </context>
 <context>
     <name>GeometryGUI</name>
@@ -5163,22 +5439,6 @@ shells and solids on the other hand.</translation>
         <source>TOOL_IMPORTEXPORT</source>
         <translation>Import / Export XAO</translation>
     </message>
-    <message>
-        <source>TABLE_SECTION</source>
-        <translation>Section</translation>
-    </message>
-    <message>
-        <source>TABLE_INDEX</source>
-        <translation>Index</translation>
-    </message>
-    <message>
-        <source>TABLE_X</source>
-        <translation>X</translation>
-    </message>
-    <message>
-        <source>TABLE_Y</source>
-        <translation>Y</translation>
-    </message>
 </context>
 <context>
     <name>BasicGUI_CurveDlg</name>
@@ -5474,6 +5734,25 @@ shells and solids on the other hand.</translation>
         <translation>X=%1, Y=%2, Z=%3</translation>
     </message>
 </context>
+<context>
+    <name>CurveCreator_TableView</name>
+    <message>
+        <source>TABLE_SECTION</source>
+        <translation>Section</translation>
+    </message>
+    <message>
+        <source>TABLE_INDEX</source>
+        <translation>Index</translation>
+    </message>
+    <message>
+        <source>TABLE_X</source>
+        <translation>X</translation>
+    </message>
+    <message>
+        <source>TABLE_Y</source>
+        <translation>Y</translation>
+    </message>
+</context>
 <context>
     <name>CurveCreator_Widget</name>
     <message>
@@ -5832,10 +6111,6 @@ Number of sketch points too small</translation>
         <source>GEOM_ADD_THICKNESS</source>
         <translation>Add thickness (edges or wires only)</translation>
     </message>
-    <message>
-        <source>GEOM_TOWARDS_INSIDE</source>
-        <translation>Thicken towards the inside</translation>
-    </message>
 </context>
 <context>
     <name>GroupGUI</name>
@@ -6580,6 +6855,22 @@ Please close this message box and select edges for gluing</translation>
         <translation>Enabling this option may result in a very time-consuming operation for some input shapes.
 Would you like to continue?</translation>
     </message>
+    <message>
+        <source>WIDTH_FACTOR_TOL</source>
+        <translation>Width factor tol.</translation>
+    </message>
+    <message>
+        <source>VOLUME_TOL</source>
+        <translation>Volume tol.</translation>
+    </message>
+    <message>
+        <source>TO_MERGE_SOLIDS</source>
+        <translation>To merge solids</translation>
+    </message>
+    <message>
+        <source>SELECT_ALL</source>
+        <translation>Select All</translation>
+    </message>
 </context>
 <context>
     <name>GEOMToolsGUI_DeleteDlg</name>
@@ -6767,6 +7058,10 @@ Do you want to create new material?</translation>
         <source>GEOM_SHARED_SHAPE</source>
         <translation>Shared_%1</translation>
     </message>
+    <message>
+        <source>GEOM_SHARED_SHAPES_MULTISHARE</source>
+        <translation>Shared by all</translation>
+    </message>
 </context>
 <context>
     <name>GEOMToolsGUI_PublishDlg</name>
@@ -6869,6 +7164,37 @@ Do you want to create new material?</translation>
         <translation>UnionFaces</translation>
     </message>
 </context>
+<context>
+    <name>RepairGUI_InspectObjectDlg</name>
+    <message>
+        <source>GEOM_INSPECT_OBJECT_TITLE</source>
+        <translation>Inspect object</translation>
+    </message>
+    <message>
+        <source>GEOM_INSPECT_OBJECT_MAIN_SHAPE</source>
+        <translation>Main shape</translation>
+    </message>
+    <message>
+        <source>GEOM_INSPECT_OBJECT_SHOW</source>
+        <translation>Show Selected</translation>
+    </message>
+    <message>
+        <source>GEOM_INSPECT_OBJECT_SHOW_ONLY</source>
+        <translation>Show Only Selected</translation>
+    </message>
+    <message>
+        <source>GEOM_INSPECT_OBJECT_HIDE</source>
+        <translation>Hide Selected</translation>
+    </message>
+    <message>
+        <source>GEOM_INSPECT_OBJECT_PUBLISH</source>
+        <translation>Publish Selected</translation>
+    </message>
+    <message>
+        <source>GEOM_INSPECT_OBJECT_NAME</source>
+        <translation>Name</translation>
+    </message>
+</context>
 <context>
     <name>GEOMGUI_CreationInfoWdg</name>
     <message>
@@ -6961,21 +7287,180 @@ Do you want to create new material?</translation>
         <source>GEOM_CHECK_INTE_V_E</source>
         <translation>Vertex to Edge + all above</translation>
     </message>
-  <message>
-    <source>GEOM_CHECK_INTE_E_E</source>
-    <translation>Edge to Edge + all above</translation>
-  </message>
-  <message>
-    <source>GEOM_CHECK_INTE_V_F</source>
-    <translation>Vertex to Face + all above</translation>
-  </message>
-  <message>
-    <source>GEOM_CHECK_INTE_E_F</source>
-    <translation>Edge to Face + all above</translation>
-  </message>
-  <message>
-    <source>GEOM_CHECK_INTE_ALL</source>
-    <translation>All interferences</translation>
-  </message>
+    <message>
+        <source>GEOM_CHECK_INTE_E_E</source>
+        <translation>Edge to Edge + all above</translation>
+    </message>
+    <message>
+        <source>GEOM_CHECK_INTE_V_F</source>
+        <translation>Vertex to Face + all above</translation>
+    </message>
+    <message>
+        <source>GEOM_CHECK_INTE_E_F</source>
+        <translation>Edge to Face + all above</translation>
+    </message>
+    <message>
+        <source>GEOM_CHECK_INTE_ALL</source>
+        <translation>Face to Face + all above</translation>
+    </message>
+</context>
+<context>
+    <name>MeasureGUI_FastCheckIntersectionsDlg</name>
+    <message>
+        <source>GEOM_FAST_CHECK_INT_DEFLECT</source>
+        <translation>Deflection coefficient</translation>
+    </message>
+    <message>
+        <source>GEOM_FAST_CHECK_INT_DETECT_GAPS</source>
+        <translation>Detect gaps with tolerance</translation>
+    </message>
+    <message>
+        <source>GEOM_FAST_CHECK_INT_SUBSHAPES</source>
+        <translation>Sub-shapes of Object %1:</translation>
+    </message>
+    <message>
+        <source>GEOM_FAST_CHECK_INT_COMPUTE</source>
+        <translation>Compute intersections</translation>
+    </message>
+    <message>
+        <source>GEOM_FAST_INTERSECTION_NAME</source>
+        <translation>Fast_intersection</translation>
+    </message>
+    <message>
+        <source>GEOM_FAST_INTERSECTION_FAILS</source>
+        <translation>No intersections</translation>
+    </message>
+    <message>
+        <source>GEOM_FAST_CHECK_OBJ</source>
+        <translation>Objects And Results</translation>
+    </message>
+</context>
+<context>
+    <name>TransformationGUI_ExtensionDlg</name>
+    <message>
+        <source>GEOM_EXTENSION_TITLE</source>
+        <translation>Extension of Edge or Face</translation>
+    </message>
+    <message>
+        <source>GEOM_EXTENSION</source>
+        <translation>Extension</translation>
+    </message>
+    <message>
+        <source>GEOM_EXTENSION_MIN</source>
+        <translation>First Parameter</translation>
+    </message>
+    <message>
+        <source>GEOM_EXTENSION_MAX</source>
+        <translation>Last Parameter</translation>
+    </message>
+    <message>
+        <source>GEOM_EXTENSION_MIN_U</source>
+        <translation>First U-Parameter</translation>
+    </message>
+    <message>
+        <source>GEOM_EXTENSION_MAX_U</source>
+        <translation>Last U-Parameter</translation>
+    </message>
+    <message>
+        <source>GEOM_EXTENSION_MIN_V</source>
+        <translation>First V-Parameter</translation>
+    </message>
+    <message>
+        <source>GEOM_EXTENSION_MAX_V</source>
+        <translation>Last V-Parameter</translation>
+    </message>
+    <message>
+        <source>GEOM_EXTENSION_EDGE_NAME</source>
+        <translation>ExtendedEdge</translation>
+    </message>
+    <message>
+        <source>GEOM_EXTENSION_FACE_NAME</source>
+        <translation>ExtendedFace</translation>
+    </message>
+</context>
+<context>
+    <name>EntityGUI_SurfFromFaceDlg</name>
+    <message>
+        <source>GEOM_SURF_FROM_FACE_TITLE</source>
+        <translation>Surface From Face Construction</translation>
+    </message>
+    <message>
+        <source>GEOM_SURF_FROM_FACE</source>
+        <translation>Surface From Face</translation>
+    </message>
+    <message>
+        <source>GEOM_SURF_FROM_FACE_NAME</source>
+        <translation>SurfaceFromFace</translation>
+    </message>
+</context>
+<context>
+    <name>OperationGUI_TransferDataDlg</name>
+    <message>
+        <source>GEOM_TRANSFER_DATA_TITLE</source>
+        <translation>Transfer Data</translation>
+    </message>
+    <message>
+        <source>GEOM_TRANSFER_DATA</source>
+        <translation>Transfer Data</translation>
+    </message>
+    <message>
+        <source>GEOM_TRANSFER_DATA_FROM</source>
+        <translation>Source Shape</translation>
+    </message>
+    <message>
+        <source>GEOM_TRANSFER_DATA_TO</source>
+        <translation>Destination Shape</translation>
+    </message>
+    <message>
+        <source>GEOM_TRANSFER_DATA_METHOD</source>
+        <translation>Type of Detection Operation</translation>
+    </message>
+    <message>
+        <source>GEOM_TD_METHOD_GETINPLACE</source>
+        <translation>Get In Place</translation>
+    </message>
+    <message>
+        <source>GEOM_TD_METHOD_GETINPLACE_OLD</source>
+        <translation>Get In Place (old)</translation>
+    </message>
+    <message>
+        <source>GEOM_TD_METHOD_GETINPLACE_HISTORY</source>
+        <translation>Get In Place By History</translation>
+    </message>
+    <message>
+        <source>GEOM_TRANSFER_DATA_INFO</source>
+        <translation>Transfer Data: Information</translation>
+    </message>
+    <message>
+        <source>GEOM_TRANSFER_DATA_NOT_COPIED</source>
+        <translation>There is nothing to be copied.</translation>
+    </message>
+    <message>
+        <source>GEOM_TRANSFER_DATA_COPIED</source>
+        <translation>The following data are copied:</translation>
+    </message>
+    <message>
+        <source>GEOM_TRANSFER_DATA_NAMES</source>
+        <translation>Names: %1 of %2</translation>
+    </message>
+    <message>
+        <source>GEOM_TRANSFER_DATA_MATERIALS</source>
+        <translation>Materials: %1 of %2</translation>
+    </message>
+</context>
+<context>
+    <name>TransformationGUI_ProjectionOnCylDlg</name>
+    <message>
+        <source>GEOM_PROJ_ON_CYL_TITLE</source>
+        <translation>Projection On A Cylinder</translation>
+    </message>
+    <message>
+        <source>GEOM_PROJ_ON_CYL_START_ANGLE</source>
+        <translation>Starting angle</translation>
+    </message>
+    <message>
+        <source>GEOM_PROJ_ON_CYL_LENGTH_ANGLE</source>
+        <translation>Length angle</translation>
+    </message>
 </context>
 </TS>