22755: [EDF] Improvement of Projection operation

[modules/geom.git] / src / GEOMGUI / GEOM_msg_en.ts

diff --git a/src/GEOMGUI/GEOM_msg_en.ts b/src/GEOMGUI/GEOM_msg_en.ts
index e62e0794d218a8539fe60cae8fbf3567bdee94b0..1630caf5a93ac776932428cd963ed89c46fe21d8 100644 (file)
--- a/src/GEOMGUI/GEOM_msg_en.ts
+++ b/src/GEOMGUI/GEOM_msg_en.ts
@@ -38,6 +38,14 @@ Do you still want to delete these objects?</translation>
         <source>DEVIDE_EDGE_NEW_OBJECT_NAME</source>
         <translation>NewObject</translation>
     </message>
+    <message>
+        <source>DEVIDE_EDGE_BAD_PROJ_MSG</source>
+        <translation>Projection outside the edge</translation>
+    </message>
+    <message>
+        <source>DEVIDE_EDGE_BY_PROJ_POINT</source>
+        <translation>Point to project</translation>
+    </message>
     <message>
         <source>ERROR_SHAPE_TYPE</source>
         <translation>Object of incorrect type selected!
@@ -376,44 +384,44 @@ Please, select face, shell or solid and try again</translation>
         <translation>Incriminated Sub-shapes</translation>
     </message>
     <message>
-        <source>GEOM_GETNONBLOCKS_TITLE</source>
-        <translation>Get non-hexahedral solids and non-quadrangular faces</translation>
+        <source>GEOM_CHECK_BLOCKS_NOT_BLOCK</source>
+        <translation>Not a Block</translation>
     </message>
     <message>
-        <source>GEOM_GETNONBLOCKS</source>
-        <translation>Get non blocks</translation>
+        <source>GEOM_CHECK_BLOCKS_EXTRA_EDGE</source>
+        <translation>Extra Edge</translation>
     </message>
     <message>
-        <source>GEOM_NONBLOCKS</source>
-        <translation>NonBlocksGroup</translation>
+        <source>GEOM_CHECK_BLOCKS_INVALID_CONNECTION</source>
+        <translation>Invalid Connection # %1</translation>
     </message>
     <message>
-        <source>GEOM_CHECK_INFOS</source>
-        <translation>Object And Its Topological Information</translation>
+        <source>GEOM_CHECK_BLOCKS_NOT_CONNECTED</source>
+        <translation>Not Connected</translation>
     </message>
     <message>
-        <source>GEOM_CHECK_SHAPE</source>
-        <translation>Check Shape</translation>
+        <source>GEOM_CHECK_BLOCKS_NOT_GLUED</source>
+        <translation>Not Glued # %1</translation>
     </message>
     <message>
-        <source>GEOM_CHECK_TITLE</source>
-        <translation>Check Shape Information</translation>
+        <source>GEOM_GETNONBLOCKS_TITLE</source>
+        <translation>Get non-hexahedral solids and non-quadrangular faces</translation>
     </message>
     <message>
-        <source>GEOM_CHECK_SELF_INTERSECTIONS</source>
-        <translation>Detect Self-intersections</translation>
+        <source>GEOM_GETNONBLOCKS</source>
+        <translation>Get non blocks</translation>
     </message>
     <message>
-        <source>GEOM_CHECK_SELF_INTERSECTIONS_FAILED</source>
-        <translation>Detection of self-intersections failed</translation>
+        <source>GEOM_NONBLOCKS</source>
+        <translation>NonBlocksGroup</translation>
     </message>
     <message>
-        <source>GEOM_NO_SELF_INTERSECTIONS</source>
-        <translation>There are no self-intersections in the shape</translation>
+        <source>GEOM_CHECK_INFOS</source>
+        <translation>Object And Its Topological Information</translation>
     </message>
     <message>
-        <source>GEOM_SELF_INTERSECTIONS_FOUND</source>
-        <translation>Some self-intersections detected</translation>
+        <source>GEOM_CHECK_SELF_INTERSECTIONS</source>
+        <translation>Detect Self-intersections</translation>
     </message>
     <message>
         <source>GEOM_CIRCLE</source>
@@ -519,6 +527,10 @@ Please, select face, shell or solid and try again</translation>
         <source>GEOM_CYLINDER_TITLE</source>
         <translation>Cylinder Construction</translation>
     </message>
+    <message>
+        <source>GEOM_CYLINDER_ANGLE_ERR</source>
+        <translation>Angle values 0 and 360 are unsafe to build proper volumes. Please uncheck the "Angle" box to use the regular cylinder constructor.</translation>
+    </message>
     <message>
         <source>GEOM_D1</source>
         <translation>D1 :</translation>
@@ -687,10 +699,18 @@ Please, select face, shell or solid and try again</translation>
         <source>GEOM_FACE_FFW</source>
         <translation>Face creation from wires and/or edges</translation>
     </message>
+    <message>
+        <source>GEOM_FACE_FROM_SURFACE</source>
+        <translation>Face creation from surface bounded by wire</translation>
+    </message>
     <message>
         <source>GEOM_FACE_OPT</source>
         <translation>Try to create a planar face</translation>
     </message>
+    <message>
+        <source>GEOM_SOLID_FROM_FACE_OPT</source>
+        <translation>Intersect shapes</translation>
+    </message>
     <message>
         <source>MAKE_FACE_TOLERANCE_TOO_BIG</source>
         <translation>Cannot build a planar face: required tolerance is
@@ -770,7 +790,7 @@ Please, select face, shell or solid and try again</translation>
     </message>
     <message>
         <source>GEOM_FILLING_COMPOUND</source>
-        <translation>Input compound</translation>
+        <translation>Input contours</translation>
     </message>
     <message>
         <source>GEOM_FILLING_MAX_DEG</source>
@@ -816,6 +836,10 @@ Please, select face, shell or solid and try again</translation>
         <source>GEOM_FREE_FACES</source>
         <translation>Free faces</translation>
     </message>
+    <message>
+        <source>GEOM_FREE_FACES_NAME</source>
+        <translation>Free_face</translation>
+    </message>
     <message>
         <source>GEOM_FREE_FACES_TITLE</source>
         <translation>Free faces</translation>
@@ -848,6 +872,14 @@ Please, select face, shell or solid and try again</translation>
         <source>GEOM_GLUE_EDGES_TITLE</source>
         <translation>Glue edges</translation>
     </message>
+    <message>
+        <source>GEOM_GLUE_EDGES_DETECT_TITLE</source>
+        <translation>Coincident edges detection</translation>
+    </message>
+    <message>
+        <source>GEOM_GLUE_FACES_DETECT_TITLE</source>
+        <translation>Coincident faces detection</translation>
+    </message>
     <message>
         <source>GLUE_ERROR_STICKED_SHAPES</source>
         <translation>The tolerance value is too big. Sticked shapes are detected.</translation>
@@ -888,14 +920,6 @@ Please, select face, shell or solid and try again</translation>
         <source>GEOM_INERTIA_CONSTR</source>
         <translation>Matrix And Moments Of Inertia</translation>
     </message>
-    <message>
-        <source>GEOM_INERTIA_I</source>
-        <translation>%1:1 :</translation>
-    </message>
-    <message>
-        <source>GEOM_INERTIA_IXYZ</source>
-        <translation>IX &amp; IY &amp; IZ :</translation>
-    </message>
     <message>
         <source>GEOM_INERTIA_TITLE</source>
         <translation>Calculs Of Inertia</translation>
@@ -992,14 +1016,6 @@ Please, select face, shell or solid and try again</translation>
         <source>GEOM_MEN_ENTER_ANGLE</source>
         <translation>Enter An Angle In Degrees</translation>
     </message>
-    <message>
-        <source>GEOM_MEN_EXPORT</source>
-        <translation>Export</translation>
-    </message>
-    <message>
-        <source>GEOM_MEN_IMPORT</source>
-        <translation>Import</translation>
-    </message>
     <message>
         <source>GEOM_MEN_ISOS</source>
         <translation>Select Number Of Isos</translation>
@@ -1197,17 +1213,45 @@ Please, select face, shell or solid and try again</translation>
         <translation>Division pattern</translation>
     </message>
     <message>
-        <source>GEOM_PROJECTION</source>
-        <translation>Projection</translation>
+        <source>GEOM_PROJECTION_ON_FACE</source>
+        <translation>Projection on Face</translation>
+    </message>
+    <message>
+        <source>GEOM_PROJECTION_ON_WIRE</source>
+        <translation>Projection on Wire</translation>
+    </message>
+    <message>
+        <source>GEOM_PROJECTION_ON_EDGE</source>
+        <translation>Projection on Edge</translation>
     </message>
     <message>
         <source>GEOM_PROJECTION_TITLE</source>
-        <translation>Projection on Face</translation>
+        <translation>Projection</translation>
     </message>
     <message>
-        <source>GEOM_SOURCE_OBJECT</source>
+        <source>GEOM_PROJ_ON_FACE_SOURCE</source>
         <translation>Source vertex, edge or wire</translation>
     </message>
+    <message>
+        <source>GEOM_PROJ_ON_FACE_TARGET</source>
+        <translation>Target face</translation>
+    </message>
+    <message>
+        <source>GEOM_PROJ_ON_WIRE_SOURCE</source>
+        <translation>Source vertex</translation>
+    </message>
+    <message>
+        <source>GEOM_PROJ_ON_WIRE_TARGET</source>
+        <translation>Target wire</translation>
+    </message>
+    <message>
+        <source>GEOM_PROJ_ON_EDGE_SOURCE</source>
+        <translation>Source vertex</translation>
+    </message>
+    <message>
+        <source>GEOM_PROJ_ON_EDGE_TARGET</source>
+        <translation>Target edge</translation>
+    </message>
     <message>
         <source>GEOM_SOLUTION</source>
         <translation>Solution :</translation>
@@ -1216,10 +1260,6 @@ Please, select face, shell or solid and try again</translation>
         <source>GEOM_SOLUTION_I</source>
         <translation>Solution %1</translation>
     </message>
-    <message>
-        <source>GEOM_TARGET_OBJECT</source>
-        <translation>Target face</translation>
-    </message>
     <message>
         <source>GEOM_WITH_CONTACT</source>
         <translation>With contact</translation>
@@ -1652,6 +1692,10 @@ Please, select face, shell or solid and try again</translation>
         <source>GEOM_SELECTED_SHAPE</source>
         <translation>Selected shape</translation>
     </message>
+    <message>
+        <source>GEOM_SELECTED_SHAPES</source>
+        <translation>Selected shapes</translation>
+    </message>
     <message>
         <source>GEOM_SELECTION</source>
         <translation>Selection</translation>
@@ -1928,6 +1972,14 @@ Please, select face, shell or solid and try again</translation>
         <source>GEOM_SOLID_TITLE</source>
         <translation>Solid Construction</translation>
     </message>
+    <message>
+        <source>GEOM_SOLID_SHELLS</source>
+        <translation>Make Solid From Shells</translation>
+    </message>
+    <message>
+        <source>GEOM_SOLID_FACES</source>
+        <translation>Make Solid From Connected Set Of Faces/Shells</translation>
+    </message>
     <message>
         <source>GEOM_SPHERE</source>
         <translation>Sphere</translation>
@@ -2218,7 +2270,7 @@ Please, select face, shell or solid and try again</translation>
     </message>
     <message>
         <source>GEOM_VERTEXES</source>
-        <translation>Vertexes</translation>
+        <translation>Vertices</translation>
     </message>
     <message>
         <source>GEOM_WATER_DENSITY</source>
@@ -2354,7 +2406,15 @@ Please, select face, shell or solid and try again</translation>
     </message>
     <message>
         <source>MEN_CURVE_CREATOR</source>
-        <translation>Curve creator</translation>
+        <translation>2D Polyline</translation>
+    </message>
+    <message>
+      <source>TOP_CURVE_CREATOR</source>
+      <translation>Create 2D polyline</translation>
+    </message>
+    <message>
+      <source>STB_CURVE_CREATOR</source>
+      <translation>Create 2D polyline</translation>
     </message>
     <message>
         <source>MEN_ALL_SEL_ONLY</source>
@@ -2574,7 +2634,7 @@ Please, select face, shell or solid and try again</translation>
     </message>
     <message>
         <source>MEN_EXPORT</source>
-        <translation>Export...</translation>
+        <translation>Export</translation>
     </message>
     <message>
         <source>MEN_EXTRUSION</source>
@@ -2682,7 +2742,7 @@ Please, select face, shell or solid and try again</translation>
     </message>
     <message>
         <source>MEN_IMPORT</source>
-        <translation>Import...</translation>
+        <translation>Import</translation>
     </message>
     <message>
         <source>MEN_INERTIA</source>
@@ -2880,6 +2940,10 @@ Please, select face, shell or solid and try again</translation>
         <source>MEN_POP_VECTORS</source>
         <translation>Show Edge Direction</translation>
     </message>
+    <message>
+        <source>MEN_POP_VERTICES</source>
+        <translation>Show Vertices</translation>
+    </message>
     <message>
         <source>MEN_PREFERENCES</source>
         <translation>Preferences</translation>
@@ -2968,10 +3032,18 @@ Please, select face, shell or solid and try again</translation>
         <source>MEN_ISOLINE</source>
         <translation>Isoline</translation>
     </message>
+    <message>
+        <source>MEN_SURFACE_FROM_FACE</source>
+        <translation>Surface From Face</translation>
+    </message>
     <message>
         <source>MEN_SOLID</source>
         <translation>Solid</translation>
     </message>
+    <message>
+        <source>MEN_SOLID_FROM_FACES</source>
+        <translation>Solid from connected faces</translation>
+    </message>
     <message>
         <source>MEN_SOLID_SEL_ONLY</source>
         <translation>Solid</translation>
@@ -3052,6 +3124,14 @@ Please, select face, shell or solid and try again</translation>
         <source>MEN_VECTOR_MODE_OFF</source>
         <translation>Hide Edge Direction</translation>
     </message>
+    <message>
+        <source>MEN_VERTICES_MODE_ON</source>
+        <translation>Show Vertices</translation>
+    </message>
+    <message>
+        <source>MEN_VERTICES_MODE_OFF</source>
+        <translation>Hide Vertices</translation>
+    </message>
     <message>
         <source>MEN_WIREFRAME</source>
         <translation>Wireframe</translation>
@@ -3076,6 +3156,14 @@ Please, select face, shell or solid and try again</translation>
         <source>MEN_POP_PREDEF_MATER_CUSTOM</source>
         <translation>Custom...</translation>
     </message>
+    <message>
+        <source>MEN_EDGE_EXTEND</source>
+        <translation>Extended Edge</translation>
+    </message>
+    <message>
+        <source>MEN_FACE_EXTEND</source>
+        <translation>Extended Face</translation>
+    </message>
     <message>
         <source>NAME_LBL</source>
         <translation>Name: </translation>
@@ -3132,6 +3220,10 @@ Please, select face, shell or solid and try again</translation>
         <source>PREF_DISPLAY_MODE</source>
         <translation>Default display mode</translation>
     </message>
+    <message>
+        <source>PREF_TRANSPARENCY</source>
+        <translation>Transparency</translation>
+    </message>
     <message>
         <source>PREF_FREE_BOUND_COLOR</source>
         <translation>Color of free boundaries</translation>
@@ -3276,6 +3368,10 @@ Please, select face, shell or solid and try again</translation>
         <source>PREF_DIMENSIONS_ANGLE_UNITS</source>
         <translation>Angle measurement units</translation>
     </message>
+    <message>
+        <source>PREF_DIMENSIONS_DEFAULT_FLYOUT</source>
+        <translation>Default flyout length</translation>
+    </message>
     <message>
         <source>PREF_DIMENSIONS_SHOW_UNITS</source>
         <translation>Show units of measurement</translation>
@@ -3504,10 +3600,6 @@ Please, select face, shell or solid and try again</translation>
         <source>STB_EXPLODE_BLOCKS</source>
         <translation>Explode on Blocks</translation>
     </message>
-    <message>
-        <source>STB_EXPORT</source>
-        <translation>Export geometry to BREP file</translation>
-    </message>
     <message>
         <source>STB_EXTRUSION</source>
         <translation>Create an extrusion</translation>
@@ -3592,10 +3684,6 @@ Please, select face, shell or solid and try again</translation>
         <source>STB_HEX_SOLID</source>
         <translation>Hexahedral Solid</translation>
     </message>
-    <message>
-        <source>STB_IMPORT</source>
-        <translation>Import geometry from BREP file</translation>
-    </message>
     <message>
         <source>STB_INERTIA</source>
         <translation>Compute moments of intertia of the shape</translation>
@@ -3740,6 +3828,10 @@ Please, select face, shell or solid and try again</translation>
         <source>STB_POP_VECTORS</source>
         <translation>Show Edge Direction</translation>
     </message>
+    <message>
+        <source>STB_POP_VERTICES</source>
+        <translation>Show Vertices</translation>
+    </message>
     <message>
         <source>STB_POP_SETTEXTURE</source>
         <translation>Add a texture</translation>
@@ -3832,6 +3924,10 @@ Please, select face, shell or solid and try again</translation>
         <source>STB_ISOLINE</source>
         <translation>Create U- or V-Isoline</translation>
     </message>
+    <message>
+        <source>STB_SURFACE_FROM_FACE</source>
+        <translation>Create a Surface From Face</translation>
+    </message>
     <message>
         <source>STB_SOLID</source>
         <translation>Build a solid</translation>
@@ -3964,54 +4060,6 @@ Please, select face, shell or solid and try again</translation>
         <source>TOM_X</source>
         <translation>X</translation>
     </message>
-    <message>
-        <source>TOOL_BASIC</source>
-        <translation>Basic</translation>
-    </message>
-    <message>
-        <source>TOOL_BLOCKS</source>
-        <translation>Blocks</translation>
-    </message>
-    <message>
-        <source>TOOL_BOOLEAN</source>
-        <translation>Boolean operations</translation>
-    </message>
-    <message>
-        <source>TOOL_FEATURES</source>
-        <translation>Modification</translation>
-    </message>
-    <message>
-        <source>TOOL_GENERATION</source>
-        <translation>Generation</translation>
-    </message>
-    <message>
-        <source>TOOL_PRIMITIVES</source>
-        <translation>Primitives</translation>
-    </message>
-    <message>
-        <source>TOOL_TRANSFORMATION</source>
-        <translation>Transformation</translation>
-    </message>
-    <message>
-        <source>TOOL_BUILD</source>
-        <translation>Build</translation>
-    </message>
-    <message>
-        <source>TOOL_OPERATIONS</source>
-        <translation>Operations</translation>
-    </message>
-    <message>
-        <source>TOOL_PICTURES</source>
-        <translation>Pictures</translation>
-    </message>
-    <message>
-        <source>TOOL_ADVANCED</source>
-        <translation>Advanced</translation>
-    </message>
-    <message>
-        <source>TOOL_MEASURES</source>
-        <translation>Measures</translation>
-    </message>
     <message>
         <source>TOP_ARC</source>
         <translation>Create an arc</translation>
@@ -4156,10 +4204,6 @@ Please, select face, shell or solid and try again</translation>
         <source>TOP_EXPLODE_BLOCKS</source>
         <translation>Explode on Blocks</translation>
     </message>
-    <message>
-        <source>TOP_EXPORT</source>
-        <translation>Export geometry to BREP file</translation>
-    </message>
     <message>
         <source>TOP_EXTRUSION</source>
         <translation>Create an extrusion</translation>
@@ -4236,10 +4280,6 @@ Please, select face, shell or solid and try again</translation>
         <source>TOP_HEX_SOLID</source>
         <translation>Hexahedral Solid</translation>
     </message>
-    <message>
-        <source>TOP_IMPORT</source>
-        <translation>Import geometry from BREP file</translation>
-    </message>
     <message>
         <source>TOP_INERTIA</source>
         <translation>Moments of intertia</translation>
@@ -4452,6 +4492,10 @@ Please, select face, shell or solid and try again</translation>
         <source>TOP_ISOLINE</source>
         <translation>Isoline</translation>
     </message>
+    <message>
+        <source>TOP_SURFACE_FROM_FACE</source>
+        <translation>Surface From Face</translation>
+    </message>
     <message>
         <source>TOP_SOLID</source>
         <translation>Build solid</translation>
@@ -4589,9 +4633,13 @@ Please, select face, shell or solid and try again</translation>
         <translation>Objects And Results</translation>
     </message>
     <message>
-        <source>GEOM_MEASURE_ANGLE_IS</source>
+        <source>GEOM_MEASURE_ANGLE_DEG</source>
         <translation>Angle in degrees :</translation>
     </message>
+    <message>
+        <source>GEOM_MEASURE_ANGLE_RAD</source>
+        <translation>Angle in radians :</translation>
+    </message>
     <message>
         <source>GEOM_LINE_INTERSECTION</source>
         <translation>Point On Lines Intersection</translation>
@@ -4614,7 +4662,7 @@ Please, select face, shell or solid and try again</translation>
     </message>
     <message>
         <source>GEOM_REMOVE_WEBS</source>
-        <translation>Compound of solids</translation>
+        <translation>Solids</translation>
     </message>
     <message>
         <source>REMOVE_WEBS_NEW_OBJ_NAME</source>
@@ -4636,6 +4684,10 @@ Please, select face, shell or solid and try again</translation>
         <source>GEOM_REMOVE_EXTRA_EDGES_TITLE</source>
         <translation>Remove extra edges</translation>
     </message>
+    <message>
+        <source>GEOM_BOOL_REMOVE_EXTRA_EDGES</source>
+        <translation>Remove extra edges</translation>
+    </message>
     <message>
         <source>GEOM_REMOVE_EXTRA_EDGES</source>
         <translation>Object to remove extra edges</translation>
@@ -4721,16 +4773,48 @@ Please, select face, shell or solid and try again</translation>
         <translation>Compute angle between two lines or linear edges</translation>
     </message>
     <message>
-      <source>TOP_MANAGE_DIMENSIONS</source>
-      <translation>Manage dimensions</translation>
+        <source>TOP_MANAGE_DIMENSIONS</source>
+        <translation>Manage dimensions</translation>
+    </message>
+    <message>
+        <source>MEN_MANAGE_DIMENSIONS</source>
+        <translation>Manage dimensions</translation>
+    </message>
+    <message>
+        <source>STB_MANAGE_DIMENSIONS</source>
+        <translation>Manage measurement dimensions of an object</translation>
+    </message>
+    <message>
+        <source>MEN_POP_SHOW_DEPENDENCY_TREE</source>
+        <translation>Show dependency tree</translation>
+    </message>
+    <message>
+        <source>MEN_POP_REDUCE_STUDY</source>
+        <translation>Reduce study</translation>
+    </message>
+    <message>
+        <source>MEN_POP_SHOW_ALL_DIMENSIONS</source>
+        <translation>Show all dimensions</translation>
+    </message>
+    <message>
+        <source>STB_POP_SHOW_ALL_DIMENSIONS</source>
+        <translation>Show all hidden measures (dimension) created for the object</translation>
+    </message>
+    <message>
+        <source>TOP_POP_SHOW_ALL_DIMENSIONS</source>
+        <translation>Show all hidden measures (dimension) created for the object</translation>
     </message>
     <message>
-      <source>MEN_MANAGE_DIMENSIONS</source>
-      <translation>Manage dimensions</translation>
+        <source>MEN_POP_HIDE_ALL_DIMENSIONS</source>
+        <translation>Hide all dimensions</translation>
     </message>
     <message>
-      <source>STB_MANAGE_DIMENSIONS</source>
-      <translation>Manage measurement dimensions of an object</translation>
+        <source>STB_POP_HIDE_ALL_DIMENSIONS</source>
+        <translation>Show all visible measures (dimension) created for the object</translation>
+    </message>
+    <message>
+        <source>TOP_POP_HIDE_ALL_DIMENSIONS</source>
+        <translation>Show all visible measures (dimension) created for the object</translation>
     </message>
     <message>
         <source>TOP_POP_AUTO_COLOR</source>
@@ -4956,6 +5040,18 @@ Please, select face, shell or solid and try again</translation>
         <source>STB_GET_SHARED_SHAPES</source>
         <translation>Get shared shapes</translation>
     </message>
+    <message>
+        <source>TOP_EXTENSION</source>
+        <translation>Extend Edge or Face</translation>
+    </message>
+    <message>
+        <source>MEN_EXTENSION</source>
+        <translation>Extension</translation>
+    </message>
+    <message>
+        <source>STB_EXTENSION</source>
+        <translation>Extend Edge or Face</translation>
+    </message>
     <message>
         <source>GEOM_PUBLISH_RESULT_GRP</source>
         <translation>Advanced options</translation>
@@ -4972,6 +5068,66 @@ Please, select face, shell or solid and try again</translation>
         <source>GEOM_PREVIEW</source>
         <translation>Preview</translation>
     </message>
+    <message>
+        <source>PREF_TAB_DEPENDENCY_VIEW</source>
+        <translation>Dependency Tree</translation>
+    </message>
+    <message>
+        <source>PREF_HIERARCHY_TYPE</source>
+        <translation>Hierarchy type</translation>
+    </message>
+    <message>
+        <source>MEN_ONLY_ASCENDANTS</source>
+        <translation>Display only ascendants tree</translation>
+    </message>
+    <message>
+        <source>MEN_ONLY_DESCENDANTS</source>
+        <translation>Display only descendants tree</translation>
+    </message>
+    <message>
+        <source>MEN_BOTH_ASCENDANTS_DESCENDANTS</source>
+        <translation>Display both ascendants and descendants trees</translation>
+    </message>
+    <message>
+        <source>GEOM_MOVE_POSSIBILITY</source>
+        <translation>Possibility to move nodes</translation>
+    </message>
+    <message>
+        <source>PREF_GROUP_DEPENDENCY_VIEW_COLOR</source>
+        <translation>Color</translation>
+    </message>
+    <message>
+        <source>PREF_DEPENDENCY_VIEW_BACKGROUND_COLOR</source>
+        <translation>Background color</translation>
+    </message>
+    <message>
+        <source>PREF_DEPENDENCY_VIEW_NODE_COLOR</source>
+        <translation>Default node color</translation>
+    </message>
+    <message>
+        <source>PREF_DEPENDENCY_VIEW_MAIN_NODE_COLOR</source>
+        <translation>Main node color</translation>
+    </message>
+    <message>
+        <source>PREF_DEPENDENCY_VIEW_UNPUBLISH_NODE_COLOR</source>
+        <translation>Unpublished node color</translation>
+    </message>
+    <message>
+        <source>PREF_DEPENDENCY_VIEW_SELECT_NODE_COLOR</source>
+        <translation>Selected node color</translation>
+    </message>
+    <message>
+        <source>PREF_DEPENDENCY_VIEW_ARROW_COLOR</source>
+        <translation>Default arrow color</translation>
+    </message>
+    <message>
+        <source>PREF_DEPENDENCY_VIEW_HIGHLIGHT_ARROW_COLOR</source>
+        <translation>Highlighted arrow color</translation>
+    </message>
+    <message>
+        <source>PREF_DEPENDENCY_VIEW_SELECT_ARROW_COLOR</source>
+        <translation>Selected arrow color</translation>
+    </message>
     <message>
         <source>GEOM_ALL_IMPORT_FILES</source>
         <translation>All supported formats ( %1 )</translation>
@@ -4999,11 +5155,6 @@ shells and solids on the other hand.</translation>
         <source>GEOM_PUBLISH_NAMED_SHAPES</source>
         <translation>Create groups for named shapes (if there are any)?</translation>
     </message>
-    <message>
-        <source>GEOM_SCALE_DIMENSIONS</source>
-        <translation>Take into account the units (%1) embedded to the file?
-Ignoring units will cause model scaling (as dimensions are supposed to be specified in meters).</translation>
-    </message>
     <message>
         <source>GEOM_PRECISION_HINT</source>
         <translation>Input value precision can be adjusted using
@@ -5034,60 +5185,111 @@ Ignoring units will cause model scaling (as dimensions are supposed to be specif
         <translation>Select image...</translation>
     </message>
     <message>
-        <source>MEN_IMPORTEXPORT</source>
-        <translation>Import / Export XAO</translation>
+        <source>CC_PNT_ITEM_X_Y</source>
+        <translation>X=%1, Y=%2</translation>
     </message>
     <message>
-        <source>TOOL_IMPORTEXPORT</source>
-        <translation>Import / Export XAO</translation>
+        <source>CC_PNT_ITEM_X_Y_Z</source>
+        <translation>X=%1, Y=%2, Z=%3</translation>
     </message>
     <message>
-        <source>TOP_EXPORTXAO</source>
-        <translation>Export to XAO</translation>
+        <source>GEOM_FILTER</source>
+        <translation>Filter</translation>
     </message>
     <message>
-        <source>MEN_EXPORTXAO</source>
-        <translation>Export XAO</translation>
+        <source>GEOM_LESS_THAN</source>
+        <translation>Less Than</translation>
     </message>
     <message>
-        <source>STB_EXPORTXAO</source>
-        <translation>Export shape to XAO format</translation>
+        <source>GEOM_LESSOREQUAL_THAN</source>
+        <translation>Equal or Less Than</translation>
     </message>
     <message>
-        <source>TOP_IMPORTXAO</source>
-        <translation>Import from XAO</translation>
+        <source>GEOM_GREAT_THAN</source>
+        <translation>Greater Than</translation>
     </message>
     <message>
-        <source>MEN_IMPORTXAO</source>
-        <translation>Import XAO</translation>
+        <source>GEOM_GREATOREQUAL_THAN</source>
+        <translation>Equal or Greater Than</translation>
     </message>
     <message>
-        <source>STB_IMPORTXAO</source>
-        <translation>Import shape from XAO format</translation>
+        <source>GEOM_SOME_SHAPES_SELECTED</source>
+        <translation>%1 shape(s) has(have) been selected</translation>
     </message>
     <message>
-        <source>GEOM_IMPORTEXPORT_204</source>
-        <translation>Export XAO</translation>
+        <source>GEOM_NO_SHAPES_SELECTED</source>
+        <translation>There are no shapes that meet filtering parameters</translation>
     </message>
+</context>
+<context>
+    <name>GeometryGUI</name>
     <message>
-        <source>GEOM_SELECT_EXPORT_XAO</source>
-        <translation>Export to XAO</translation>
+        <source>TOOL_BASIC</source>
+        <translation>Basic</translation>
     </message>
     <message>
-        <source>XAO_FILES</source>
-        <translation>XAO files (*.xao)</translation>
+        <source>TOOL_BLOCKS</source>
+        <translation>Blocks</translation>
     </message>
     <message>
-        <source>TOOLS_IMPORTEXPORT</source>
-        <translation>Import / Export</translation>
+        <source>TOOL_BOOLEAN</source>
+        <translation>Boolean operations</translation>
     </message>
     <message>
-        <source>CC_PNT_ITEM_X_Y</source>
-        <translation>X=%1, Y=%2</translation>
+        <source>TOOL_FEATURES</source>
+        <translation>Modification</translation>
     </message>
     <message>
-        <source>CC_PNT_ITEM_X_Y_Z</source>
-        <translation>X=%1, Y=%2, Z=%3</translation>
+        <source>TOOL_GENERATION</source>
+        <translation>Generation</translation>
+    </message>
+    <message>
+        <source>TOOL_PRIMITIVES</source>
+        <translation>Primitives</translation>
+    </message>
+    <message>
+        <source>TOOL_TRANSFORMATION</source>
+        <translation>Transformation</translation>
+    </message>
+    <message>
+        <source>TOOL_BUILD</source>
+        <translation>Build</translation>
+    </message>
+    <message>
+        <source>TOOL_OPERATIONS</source>
+        <translation>Operations</translation>
+    </message>
+    <message>
+        <source>TOOL_PICTURES</source>
+        <translation>Pictures</translation>
+    </message>
+    <message>
+        <source>TOOL_ADVANCED</source>
+        <translation>Advanced</translation>
+    </message>
+    <message>
+        <source>TOOL_MEASURES</source>
+        <translation>Measures</translation>
+    </message>
+    <message>
+        <source>TOOL_IMPORTEXPORT</source>
+        <translation>Import / Export XAO</translation>
+    </message>
+    <message>
+        <source>TABLE_SECTION</source>
+        <translation>Section</translation>
+    </message>
+    <message>
+        <source>TABLE_INDEX</source>
+        <translation>Index</translation>
+    </message>
+    <message>
+        <source>TABLE_X</source>
+        <translation>X</translation>
+    </message>
+    <message>
+        <source>TABLE_Y</source>
+        <translation>Y</translation>
     </message>
 </context>
 <context>
@@ -5330,74 +5532,39 @@ Ignoring units will cause model scaling (as dimensions are supposed to be specif
         <translation>Face 2 V</translation>
     </message>
 </context>
-<context>
-    <name>CurveCreator_NewPointDlg</name>
-    <message>
-        <source>ADD_NEW_POINT</source>
-        <translation>Add new points</translation>
-    </message>
-    <message>
-        <source>X_COORD</source>
-        <translation>X</translation>
-    </message>
-    <message>
-        <source>Y_COORD</source>
-        <translation>Y</translation>
-    </message>
-    <message>
-        <source>Z_COORD</source>
-        <translation>Z</translation>
-    </message>
-    <message>
-        <source>ADD_BTN</source>
-        <translation>Add</translation>
-    </message>
-    <message>
-        <source>ADD_CONTINUE_BTN</source>
-        <translation>Add and continue</translation>
-    </message>
-    <message>
-        <source>ADD_NEW_POINT_TO_%1</source>
-        <translation>Add new point to %1</translation>
-    </message>
-    <message>
-        <source>SET_POINT_COORDINATES</source>
-        <translation>Set point coordinates</translation>
-    </message>
-</context>
 <context>
     <name>CurveCreator_NewSectionDlg</name>
     <message>
-        <source>NAME</source>
+        <source>SECTION_NAME</source>
         <translation>Name</translation>
     </message>
     <message>
-        <source>LINE_TYPE</source>
+        <source>SECTION_LINE_TYPE</source>
         <translation>Type</translation>
     </message>
     <message>
-        <source>POLYLINE_TYPE</source>
+        <source>SECTION_POLYLINE_TYPE</source>
         <translation>Polyline</translation>
     </message>
     <message>
-        <source>SPLINE_TYPE</source>
+        <source>SECTION_SPLINE_TYPE</source>
         <translation>Spline</translation>
     </message>
     <message>
-        <source>LINE_CLOSED</source>
+        <source>SECTION_LINE_CLOSED</source>
         <translation>Closed</translation>
     </message>
     <message>
-        <source>OK</source>
-        <translation>Ok</translation>
+        <source>SECTION_ADD_BTN</source>
+        <translation>Add</translation>
     </message>
     <message>
-        <source>ADD_BTN</source>
-        <translation>Add</translation>
+        <source>SECTION_OK_BTN</source>
+        <translation>Ok</translation>
     </message>
     <message>
-        <source>ADD_CONTINUE_BTN</source>
-        <translation>Add and continue</translation>
+        <source>SECTION_CANCEL_BTN</source>
+        <translation>Cancel</translation>
     </message>
     <message>
         <source>ADD_NEW_SECTION</source>
@@ -5422,11 +5589,7 @@ Ignoring units will cause model scaling (as dimensions are supposed to be specif
 <context>
     <name>CurveCreator_Widget</name>
     <message>
-        <source>CURVE_NAME_TLT</source>
-        <translation>Name</translation>
-    </message>
-    <message>
-        <source>SECTION_GROUP_TLT</source>
+        <source>SECTION_GROUP_TITLE</source>
         <translation>Sections</translation>
     </message>
     <message>
@@ -5453,22 +5616,6 @@ Ignoring units will cause model scaling (as dimensions are supposed to be specif
         <source>NEW_SECTION_TLT</source>
         <translation>Insert new section</translation>
     </message>
-    <message>
-        <source>INSERT_SECTION_BEFORE</source>
-        <translation>Insert section before</translation>
-    </message>
-    <message>
-        <source>INSERT_SECTION_BEFORE_TLT</source>
-        <translation>Insert section before</translation>
-    </message>
-    <message>
-        <source>INSERT_SECTION_AFTER</source>
-        <translation>Insert section after</translation>
-    </message>
-    <message>
-        <source>INSERT_SECTION_AFTER_TLT</source>
-        <translation>Insert section after</translation>
-    </message>
     <message>
         <source>ADDITION_MODE</source>
         <translation>Addition mode</translation>
@@ -5493,18 +5640,6 @@ Ignoring units will cause model scaling (as dimensions are supposed to be specif
         <source>DETECTION_MODE_TLT</source>
         <translation>Detection mode</translation>
     </message>
-    <message>
-        <source>INSERT_POINT_BEFORE</source>
-        <translation>Insert point before</translation>
-    </message>
-    <message>
-        <source>INSERT_POINT_BEFORE_TLT</source>
-        <translation>Insert point before</translation>
-    </message>
-    <message>
-        <source>INSERT_POINT_AFTER</source>
-        <translation>Insert point after</translation>
-    </message>
     <message>
         <source>CLOSE_SECTIONS</source>
         <translation>Set closed</translation>
@@ -5553,22 +5688,6 @@ Ignoring units will cause model scaling (as dimensions are supposed to be specif
         <source>JOIN_TLT</source>
         <translation>Join selected sections</translation>
     </message>
-    <message>
-        <source>STEP_UP</source>
-        <translation>Move up</translation>
-    </message>
-    <message>
-        <source>STEP_UP_TLT</source>
-        <translation>Move selected objects up</translation>
-    </message>
-    <message>
-        <source>STEP_DOWN</source>
-        <translation>Move down</translation>
-    </message>
-    <message>
-        <source>STEP_DOWN_TLT</source>
-        <translation>Move selected objects down</translation>
-    </message>
     <message>
         <source>CLEAR_ALL</source>
         <translation>Clear all</translation>
@@ -5586,6 +5705,33 @@ Ignoring units will cause model scaling (as dimensions are supposed to be specif
         <translation>Join all sections</translation>
     </message>
 </context>
+<context>
+    <name>EntityGUI_PolylineDlg</name>
+    <message>
+        <source>POLYLINE_DLG_TITLE</source>
+        <translation>Polyline Construction</translation>
+    </message>
+    <message>
+        <source>POLYLINE_TITLE</source>
+        <translation>Polyline</translation>
+    </message>
+    <message>
+        <source>POLYLINE_NAME</source>
+        <translation>Polyline</translation>
+    </message>
+    <message>
+        <source>POLYLINE_IMPORT</source>
+        <translation>Import polyline</translation>
+    </message>
+    <message>
+        <source>POLYLINE_ADD_SECTION</source>
+        <translation>Add section</translation>
+    </message>
+    <message>
+        <source>POLYLINE_EDIT_SECTION</source>
+        <translation>Edit section</translation>
+    </message>
+</context>
 <context>
     <name>EntityGUI_SketcherDlg</name>
     <message>
@@ -6147,28 +6293,38 @@ Number of sketch points too small</translation>
         <translation>Show all</translation>
     </message>
     <message>
-      <source>HIDE_ALL_BTN</source>
-      <translation>Hide all</translation>
+        <source>HIDE_ALL_BTN</source>
+        <translation>Hide all</translation>
+    </message>
+    <message>
+        <source>DISTANCE_ITEM</source>
+        <translation>Distance</translation>
+    </message>
+    <message>
+        <source>DIAMETER_ITEM</source>
+        <translation>Diameter</translation>
     </message>
     <message>
-      <source>DISTANCE_ITEM</source>
-      <translation>Distance</translation>
+        <source>ANGLE_ITEM</source>
+        <translation>Angle</translation>
     </message>
     <message>
-      <source>DIAMETER_ITEM</source>
-      <translation>Diameter</translation>
+        <source>WRN_TITLE_UNSAVED</source>
+        <translation>Unsaved changes</translation>
     </message>
     <message>
-      <source>ANGLE_ITEM</source>
-      <translation>Angle</translation>
+        <source>WRN_MSG_CHANGES_LOST</source>
+        <translation>The unsaved changes will be lost.
+Do you wish to continue?</translation>
     </message>
     <message>
-      <source>WRN_TITLE_UNSAVED</source>
-      <translation>Unsaved changes</translation>
+        <source>WRN_MSG_CHANGES_SAVE</source>
+        <translation>The unsaved changes will be lost.
+Do you wish to save them?</translation>
     </message>
     <message>
-      <source>WRN_MSG_UNSAVED</source>
-      <translation>The unsaved changes will be lost.
+        <source>WRN_MSG_UNSAVED</source>
+        <translation>The unsaved changes will be lost.
 Do you want to continue?</translation>
     </message>
 </context>
@@ -6268,6 +6424,161 @@ Do you want to continue?</translation>
 Please specify suitable arguments.</translation>
     </message>
 </context>
+<context>
+    <name>MeasureGUI_CheckShapeDlg</name>
+    <message>
+        <source>GEOM_CHECK_TITLE</source>
+        <translation>Check Shape Information</translation>
+    </message>
+    <message>
+        <source>GEOM_CHECK_SHAPE</source>
+        <translation>Check Shape</translation>
+    </message>
+    <message>
+        <source>GEOM_CHECK_SHAPE_NAME</source>
+        <translation>Faulty</translation>
+    </message>
+    <message>
+        <source>GEOM_CHECK_SHAPE_VALID</source>
+        <translation>This Shape seems to be valid</translation>
+    </message>
+    <message>
+        <source>GEOM_CHECK_SHAPE_NOT_VALID</source>
+        <translation>This Shape has errors:</translation>
+    </message>
+    <message>
+        <source>CHECK_ERROR_INVALID_POINT_ON_CURVE</source>
+        <translation>Invalid Point on Curve</translation>
+    </message>
+    <message>
+        <source>CHECK_ERROR_INVALID_POINT_ON_CURVE_ON_SURFACE</source>
+        <translation>Invalid Point on Curve on Surface</translation>
+    </message>
+    <message>
+        <source>CHECK_ERROR_INVALID_POINT_ON_SURFACE</source>
+        <translation>Invalid Point on Surface</translation>
+    </message>
+    <message>
+        <source>CHECK_ERROR_NO_3D_CURVE</source>
+        <translation>No 3D Curve</translation>
+    </message>
+    <message>
+        <source>CHECK_ERROR_MULTIPLE_3D_CURVE</source>
+        <translation>Multiple 3D Curve</translation>
+    </message>
+    <message>
+        <source>CHECK_ERROR_INVALID_3D_CURVE</source>
+        <translation>Invalid 3D Curve</translation>
+    </message>
+    <message>
+        <source>CHECK_ERROR_NO_CURVE_ON_SURFACE</source>
+        <translation>No Curve on Surface</translation>
+    </message>
+    <message>
+        <source>CHECK_ERROR_INVALID_CURVE_ON_SURFACE</source>
+        <translation>Invalid Curve on Surface</translation>
+    </message>
+    <message>
+        <source>CHECK_ERROR_INVALID_CURVE_ON_CLOSED_SURFACE</source>
+        <translation>Invalid Curve on Closed Surface</translation>
+    </message>
+    <message>
+        <source>CHECK_ERROR_INVALID_SAME_RANGE_FLAG</source>
+        <translation>Invalid Same Range Flag</translation>
+    </message>
+    <message>
+        <source>CHECK_ERROR_INVALID_SAME_PARAMETER_FLAG</source>
+        <translation>Invalid Same Parameter Flag</translation>
+    </message>
+    <message>
+        <source>CHECK_ERROR_INVALID_DEGENERATED_FLAG</source>
+        <translation>Invalid Degenerated Flag</translation>
+    </message>
+    <message>
+        <source>CHECK_ERROR_FREE_EDGE</source>
+        <translation>Free Edge</translation>
+    </message>
+    <message>
+        <source>CHECK_ERROR_INVALID_MULTI_CONNEXITY</source>
+        <translation>Invalid Multi Connexity</translation>
+    </message>
+    <message>
+        <source>CHECK_ERROR_INVALID_RANGE</source>
+        <translation>Invalid Range</translation>
+    </message>
+    <message>
+        <source>CHECK_ERROR_EMPTY_WIRE</source>
+        <translation>Empty Wire</translation>
+    </message>
+    <message>
+        <source>CHECK_ERROR_REDUNDANT_EDGE</source>
+        <translation>Redundant Edge</translation>
+    </message>
+    <message>
+        <source>CHECK_ERROR_SELF_INTERSECTING_WIRE</source>
+        <translation>Self-Intersecting Wire</translation>
+    </message>
+    <message>
+        <source>CHECK_ERROR_NO_SURFACE</source>
+        <translation>No Surface</translation>
+    </message>
+    <message>
+        <source>CHECK_ERROR_INVALID_WIRE</source>
+        <translation>Invalid Wire</translation>
+    </message>
+    <message>
+        <source>CHECK_ERROR_REDUNDANT_WIRE</source>
+        <translation>Redundant Wire</translation>
+    </message>
+    <message>
+        <source>CHECK_ERROR_INTERSECTING_WIRES</source>
+        <translation>Intersecting Wires</translation>
+    </message>
+    <message>
+        <source>CHECK_ERROR_INVALID_IMBRICATION_OF_WIRES</source>
+        <translation>Invalid Imbrication of Wires</translation>
+    </message>
+    <message>
+        <source>CHECK_ERROR_EMPTY_SHELL</source>
+        <translation>Empty Shell</translation>
+    </message>
+    <message>
+        <source>CHECK_ERROR_REDUNDANT_FACE</source>
+        <translation>Redundant Face</translation>
+    </message>
+    <message>
+        <source>CHECK_ERROR_UNORIENTABLE_SHAPE</source>
+        <translation>Unorientable Shape</translation>
+    </message>
+    <message>
+        <source>CHECK_ERROR_NOT_CLOSED</source>
+        <translation>Not Closed</translation>
+    </message>
+    <message>
+        <source>CHECK_ERROR_NOT_CONNECTED</source>
+        <translation>Not Connected</translation>
+    </message>
+    <message>
+        <source>CHECK_ERROR_SUBSHAPE_NOT_IN_SHAPE</source>
+        <translation>Subshape not in Shape</translation>
+    </message>
+    <message>
+        <source>CHECK_ERROR_BAD_ORIENTATION</source>
+        <translation>Bad Orientation</translation>
+    </message>
+    <message>
+        <source>CHECK_ERROR_BAD_ORIENTATION_OF_SUBSHAPE</source>
+        <translation>Bad Orientation of Subshape</translation>
+    </message>
+    <message>
+        <source>CHECK_ERROR_INVALID_TOLERANCE_VALUE</source>
+        <translation>Invalid Tolerance Value</translation>
+    </message>
+    <message>
+        <source>CHECK_ERROR_CHECK_FAIL</source>
+        <translation>Check Fail</translation>
+    </message>
+</context>
 <context>
     <name>OperationGUI_ChamferDlg</name>
     <message>
@@ -6600,6 +6911,61 @@ Do you want to create new material?</translation>
         <translation>P&amp;ublish And Close</translation>
     </message>
 </context>
+<context>
+    <name>GEOMToolsGUI_ReduceStudyDlg</name>
+    <message>
+        <source>GEOM_REDUCE_STUDY_TITLE</source>
+        <translation>Reduce study</translation>
+    </message>
+    <message>
+        <source>GEOM_REDUCE_STUDY_KEPT_OBJECTS</source>
+        <translation>Objects to be kept</translation>
+    </message>
+    <message>
+        <source>GEOM_REDUCE_STUDY_REMOVE_OBJECTS</source>
+        <translation>Objects to be removed</translation>
+    </message>
+    <message>
+        <source>GEOM_REDUCE_STUDY_NAME</source>
+        <translation>Name</translation>
+    </message>
+    <message>
+        <source>GEOM_REDUCE_STUDY_OPTIONS</source>
+        <translation>Options</translation>
+    </message>
+    <message>
+        <source>GEOM_REDUCE_STUDY_INTERMEDIATES</source>
+        <translation>Intermediate objects</translation>
+    </message>
+    <message>
+        <source>GEOM_REDUCE_STUDY_SUB_OBJECTS</source>
+        <translation>Sub-objects</translation>
+    </message>
+    <message>
+        <source>GEOM_REDUCE_STUDY_KEEP</source>
+        <translation>Keep</translation>
+    </message>
+    <message>
+        <source>GEOM_REDUCE_STUDY_UNPUBLISH</source>
+        <translation>Unpublish</translation>
+    </message>
+    <message>
+        <source>GEOM_REDUCE_STUDY_REMOVE</source>
+        <translation>Remove</translation>
+    </message>
+    <message>
+        <source>GEOM_REDUCE_STUDY_REMOVE_EMPTY_FOLDER</source>
+        <translation>Remove empty folders</translation>
+    </message>
+    <message>
+        <source>GEOM_REDUCE_STUDY_SOFT_REMOVAL</source>
+        <translation>Soft removal</translation>
+    </message>
+    <message>
+        <source>GEOM_REDUCE_STUDY_WARNING_DELETE</source>
+        <translation>Do you really want to delete intermediate objects? After applying this operation study will be broken.</translation>
+    </message>
+</context>
 <context>
     <name>RepairGUI_UnionFacesDlg</name>
     <message>
@@ -6639,88 +7005,147 @@ Do you want to create new material?</translation>
     </message>
 </context>
 <context>
-    <name>ImportExportGUI_ExportXAODlg</name>
+    <name>EntityGUI_IsolineDlg</name>
+    <message>
+        <source>GEOM_ISOLINE_TITLE</source>
+        <translation>Isoline Construction</translation>
+    </message>
     <message>
-        <source>GEOM_EXPORTXAO_TITLE</source>
-        <translation>Export XAO</translation>
+        <source>GEOM_ISOLINE</source>
+        <translation>Isoline</translation>
     </message>
     <message>
-        <source>GEOM_EXPORTXAO</source>
-        <translation>Export XAO</translation>
+        <source>GEOM_ISOLINE_U</source>
+        <translation>U-Isoline</translation>
     </message>
     <message>
-        <source>GEOM_EXPORTXAO_EXPORTINGSHAPE</source>
-        <translation>Shape</translation>
+        <source>GEOM_ISOLINE_V</source>
+        <translation>V-Isoline</translation>
     </message>
+</context>
+<context>
+    <name>MeasureGUI_CheckSelfIntersectionsDlg</name>
     <message>
-        <source>GEOM_EXPORTXAO_FILENAME</source>
-        <translation>File Name</translation>
+        <source>GEOM_CHECK_INTE_INTERSECTIONS</source>
+        <translation>Self-intersections</translation>
     </message>
     <message>
-        <source>GEOM_EXPORTXAO_AUTHOR</source>
-        <translation>Author</translation>
+        <source>GEOM_CHECK_INTE_SUBSHAPES</source>
+        <translation>Sub-shapes</translation>
     </message>
     <message>
-        <source>GEOM_EXPORTXAO_LGROUPS</source>
-        <translation>Groups</translation>
+        <source>GEOM_CHECK_INTE_CHECK_LEVEL</source>
+        <translation>Level of check</translation>
     </message>
     <message>
-        <source>GEOM_EXPORTXAO_LFIELDS</source>
-        <translation>Fields</translation>
+        <source>GEOM_CHECK_INTE_SUMMARY</source>
+        <translation>Summary</translation>
     </message>
     <message>
-        <source>EXPORT_DLG_ACCEPT</source>
-        <translation>OK</translation>
+        <source>GEOM_CHECK_INTE_COMPUTE</source>
+        <translation>Compute self-intersections</translation>
     </message>
-</context>
-<context>
-    <name>ImportExportGUI_ImportXAODlg</name>
     <message>
-        <source>GEOM_IMPORTXAO_TITLE</source>
-        <translation>Import XAO</translation>
+        <source>GEOM_SELF_INTERSECTION_NAME</source>
+        <translation>Self_intersection</translation>
     </message>
     <message>
-        <source>GEOM_IMPORTXAO</source>
-        <translation>Import XAO</translation>
+        <source>GEOM_NO_SELF_INTERSECTIONS</source>
+        <translation>There are no self-intersections in the shape</translation>
     </message>
     <message>
-        <source>GEOM_IMPORTXAO_IMPORTINGSHAPE</source>
-        <translation>Shape</translation>
+        <source>GEOM_SELF_INTERSECTIONS_FOUND</source>
+        <translation>Some self-intersections detected</translation>
     </message>
     <message>
-        <source>GEOM_IMPORTXAO_FILENAME</source>
-        <translation>File Name</translation>
+        <source>GEOM_CHECK_SELF_INTERSECTIONS_FAILED</source>
+        <translation>Detection of self-intersections failed</translation>
     </message>
     <message>
-        <source>GEOM_IMPORTXAO_LGROUPS</source>
-        <translation>Groups</translation>
+        <source>GEOM_CHECK_SELF_INTERSECTIONS_ERRORS</source>
+        <translation>Warning: there were errors during the operation, so the list may be incomplete.</translation>
     </message>
     <message>
-        <source>GEOM_IMPORTXAO_LFIELDS</source>
-        <translation>Fields</translation>
+        <source>GEOM_CHECK_INTE_V_V</source>
+        <translation>Vertex to Vertex</translation>
     </message>
     <message>
-        <source>STEP</source>
-        <translation>Step</translation>
+        <source>GEOM_CHECK_INTE_V_E</source>
+        <translation>Vertex to Edge + all above</translation>
     </message>
+  <message>
+    <source>GEOM_CHECK_INTE_E_E</source>
+    <translation>Edge to Edge + all above</translation>
+  </message>
+  <message>
+    <source>GEOM_CHECK_INTE_V_F</source>
+    <translation>Vertex to Face + all above</translation>
+  </message>
+  <message>
+    <source>GEOM_CHECK_INTE_E_F</source>
+    <translation>Edge to Face + all above</translation>
+  </message>
+  <message>
+    <source>GEOM_CHECK_INTE_ALL</source>
+    <translation>All interferences</translation>
+  </message>
 </context>
 <context>
-    <name>EntityGUI_IsolineDlg</name>
+    <name>TransformationGUI_ExtensionDlg</name>
     <message>
-        <source>GEOM_ISOLINE_TITLE</source>
-        <translation>Isoline Construction</translation>
+        <source>GEOM_EXTENSION_TITLE</source>
+        <translation>Extension of Edge or Face</translation>
     </message>
     <message>
-        <source>GEOM_ISOLINE</source>
-        <translation>Isoline</translation>
+        <source>GEOM_EXTENSION</source>
+        <translation>Extension</translation>
     </message>
     <message>
-        <source>GEOM_ISOLINE_U</source>
-        <translation>U-Isoline</translation>
+        <source>GEOM_EXTENSION_MIN</source>
+        <translation>First Parameter</translation>
     </message>
     <message>
-        <source>GEOM_ISOLINE_V</source>
-        <translation>V-Isoline</translation>
+        <source>GEOM_EXTENSION_MAX</source>
+        <translation>Last Parameter</translation>
+    </message>
+    <message>
+        <source>GEOM_EXTENSION_MIN_U</source>
+        <translation>First U-Parameter</translation>
+    </message>
+    <message>
+        <source>GEOM_EXTENSION_MAX_U</source>
+        <translation>Last U-Parameter</translation>
+    </message>
+    <message>
+        <source>GEOM_EXTENSION_MIN_V</source>
+        <translation>First V-Parameter</translation>
+    </message>
+    <message>
+        <source>GEOM_EXTENSION_MAX_V</source>
+        <translation>Last V-Parameter</translation>
+    </message>
+    <message>
+        <source>GEOM_EXTENSION_EDGE_NAME</source>
+        <translation>ExtendedEdge</translation>
+    </message>
+    <message>
+        <source>GEOM_EXTENSION_FACE_NAME</source>
+        <translation>ExtendedFace</translation>
+    </message>
+</context>
+<context>
+    <name>EntityGUI_SurfFromFaceDlg</name>
+    <message>
+        <source>GEOM_SURF_FROM_FACE_TITLE</source>
+        <translation>Surface From Face Construction</translation>
+    </message>
+    <message>
+        <source>GEOM_SURF_FROM_FACE</source>
+        <translation>Surface From Face</translation>
+    </message>
+    <message>
+        <source>GEOM_SURF_FROM_FACE_NAME</source>
+        <translation>SurfaceFromFace</translation>
     </message>
 </context>
 </TS>