Implementation of change orientation in Repair in GEOM.

[modules/geom.git] / src / GEOMGUI / GEOM_msg_en.po

diff --git a/src/GEOMGUI/GEOM_msg_en.po b/src/GEOMGUI/GEOM_msg_en.po
index de7d79c71ff20a72c0b42c5a97124d9455d4e8bb..8bbe3cae2756e889093b868749b304ae5afe4305 100644 (file)
--- a/src/GEOMGUI/GEOM_msg_en.po
+++ b/src/GEOMGUI/GEOM_msg_en.po
@@ -1,3 +1,22 @@
+#  Copyright (C) 2005  OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
+#  CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
+#
+#  This library is free software; you can redistribute it and/or
+#  modify it under the terms of the GNU Lesser General Public
+#  License as published by the Free Software Foundation; either
+#  version 2.1 of the License.
+#
+#  This library is distributed in the hope that it will be useful,
+#  but WITHOUT ANY WARRANTY; without even the implied warranty of
+#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+#  Lesser General Public License for more details.
+#
+#  You should have received a copy of the GNU Lesser General Public
+#  License along with this library; if not, write to the Free Software
+#  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+#
+# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
+#
 # This is a Qt message file in .po format.  Each msgid starts with
 # a scope.  This scope should *NOT* be translated - eg. translating
 # from French to English, "Foo::Bar" would be translated to "Pub",
@@ -28,7 +47,7 @@ msgstr "&Cancel"
 
 #Button Ok
 msgid "GEOM_BUT_OK"
-msgstr "&Ok"
+msgstr "O&k"
 
 #Button Yes
 msgid "GEOM_BUT_YES"
@@ -503,8 +522,8 @@ msgid "GEOM_MIRROR"
 msgstr "Mirror"
 
 #Prism
-msgid "GEOM_PRISM"
-msgstr "Prism"
+msgid "GEOM_EXTRUSION"
+msgstr "Extrusion"
 
 #Sub Shapes
 msgid "GEOM_SUB_SHAPE"
@@ -528,7 +547,7 @@ msgstr "Check Shape"
 
 #Check Blocks Compound
 msgid "GEOM_CHECK_BLOCKS_COMPOUND"
-msgstr "Check Blocks Compound"
+msgstr "Check and Improve Blocks Compound"
 
 #Check Blocks Compound Errors
 msgid "GEOM_CHECK_BLOCKS_COMPOUND_ERRORS"
@@ -604,6 +623,10 @@ msgstr "Minor radius :"
 msgid "GEOM_COMPOUND"
 msgstr "Compound"
 
+#Compound of Blocks
+msgid "GEOM_BLOCKS_COMPOUND"
+msgstr "BlocksCompound"
+
 #CompSolid
 msgid "GEOM_COMPOUNDSOLID"
 msgstr "CompSolid"
@@ -838,10 +861,6 @@ msgstr "Cylinder Construction"
 msgid "GEOM_CHECK_TITLE"
 msgstr "Check Shape Informations"
 
-#: MeasureGUI_CheckCompoundOfBlocks.cxx:61
-msgid "GEOM_CHECK_COMPOUND_BLOCKS_TITLE"
-msgstr "Check Blocks Compound"
-
 #: GeometryGUI_CheckShape.cxx:83
 msgid "GEOM_CHECK_INFOS"
 msgstr "Object And Its Topological Informations"
@@ -888,7 +907,7 @@ msgstr "Try to create a planar face"
 
 #: GeometryGUI_FillingDlg.cxx:53
 msgid "GEOM_FILLING_TITLE"
-msgstr "Filling Surface With Curves"
+msgstr "Filling Surface With Edges"
 
 #: GeometryGUI_FillingDlg.cxx:112
 msgid "GEOM_FILLING_ARG"
@@ -908,7 +927,7 @@ msgstr "Tol. 2D :"
 
 #: GeometryGUI_FillingDlg.cxx:170
 msgid "GEOM_FILLING_COMPOUND"
-msgstr "Curves Comp."
+msgstr "Edge component"
 
 #: GeometryGUI_FillingDlg.cxx:184
 msgid "GEOM_FILLING_TOL_3D"
@@ -1033,13 +1052,16 @@ msgid "GEOM_PLANE_PV"
 msgstr "Point + Vector"
 
 #: GeometryGUI_PrismDlg.cxx:54
-msgid "GEOM_PRISM_TITLE"
-msgstr "Prism Construction"
+msgid "GEOM_EXTRUSION_TITLE"
+msgstr "Construction by Extrusion"
 
 #: GeometryGUI_PrismDlg.cxx:83
-msgid "GEOM_PRISM_BSV"
+msgid "GEOM_EXTRUSION_BSV"
 msgstr "Base Shape + Vector"
 
+msgid "GEOM_EXTRUSION_BSV_2P"
+msgstr "Base Shape + 2 Points"
+
 #: GeometryGUI_PropertiesDlg.cxx:56
 msgid "GEOM_PROPERTIES_TITLE"
 msgstr "Basic Properties Informations"
@@ -1620,6 +1642,12 @@ msgstr "Free boundaries"
 msgid "GEOM_FREE_FACES"
 msgstr "Free faces"
 
+msgid "GEOM_CHANGE_ORIENTATION_TITLE"
+msgstr "Change orientation"
+
+msgid "GEOM_CHANGE_ORIENTATION"
+msgstr "Objects to change orientation"
+
 msgid "GEOM_BY_PARAMETER"
 msgstr "By parameter"
 
@@ -1692,6 +1720,9 @@ msgstr "Point Coordinates"
 msgid "MeasureGUI_PointDlg::COORDINATES"
 msgstr "Point and its coordinates"
 
+msgid "MeasureGUI_1Sel1TextView1Check_QTD::CHECK_SHAPE_GEOMETRY"
+msgstr "Check also geometry"
+
 msgid "GroupGUI_GroupDlg::CREATE_GROUP_TITLE"
 msgstr "Create Group"
 
@@ -1963,6 +1994,9 @@ msgstr "ProcessShape"
 msgid "SUPRESS_FACE_NEW_OBJ_NAME"
 msgstr "SupressFaces"
 
+msgid "CHANGE_ORIENTATION_NEW_OBJ_NAME"
+msgstr "Invert"
+
 msgid "NON_GEOM_OBJECTS_SELECTED"
 msgstr "There are objects selected which do not belong to %1 component."
 
@@ -2115,10 +2149,10 @@ msgid "STB_BOX"
 msgstr "Create a box"
 
 msgid "TOP_CYLINDER"
-msgstr "Create a cyliner"
+msgstr "Create a cylinder"
 
 msgid "MEN_CYLINDER"
-msgstr "Cyliner"
+msgstr "Cylinder"
 
 msgid "STB_CYLINDER"
 msgstr "Create a cylinder"
@@ -2181,13 +2215,13 @@ msgid "STB_FILLING"
 msgstr "Create a filling"
 
 msgid "TOP_PIPE"
-msgstr "Create a pipe"
+msgstr "Extrusion along a path"
 
 msgid "MEN_PIPE"
-msgstr "Pipe"
+msgstr "Extrusion along a path"
 
 msgid "STB_PIPE"
-msgstr "Create a pipe"
+msgstr "Create a shape by Extrusion along a path"
 
 msgid "MEN_GROUP"
 msgstr "Group"
@@ -2588,6 +2622,15 @@ msgstr "Check free faces"
 msgid "STB_CHECK_FREE_FACES"
 msgstr "Check free faces"
 
+msgid "TOP_CHANGE_ORIENTATION"
+msgstr "Change orientation"
+
+msgid "MEN_CHANGE_ORIENTATION"
+msgstr "Change orientation"
+
+msgid "STB_CHANGE_ORIENTATION"
+msgstr "Change orientation"
+
 msgid "MEN_MEASURES"
 msgstr "Measures"
 
@@ -2741,6 +2784,9 @@ msgstr "Shading"
 msgid "MEN_SHADING"
 msgstr "Shading"
 
+msgid "MEN_WIREFRAME"
+msgstr "Wireframe"
+
 msgid "STB_SHADING"
 msgstr "Shading"
 
@@ -2882,17 +2928,14 @@ msgstr "OCC Viewer 3d"
 msgid "PREF_GROUP_GENERAL"
 msgstr "General"
 
-msgid "PREF_ISOS_U"
-msgstr "Number of isolines along U"
-
-msgid "PREF_ISOS_V"
-msgstr "Number of isolines along V"
-
 msgid "PREF_SHADING_COLOR"
 msgstr "Default shading color"
 
 msgid "PREF_STEP_VALUE"
 msgstr "Step value for spin boxes"
 
+msgid "PREF_DISPLAY_MODE"
+msgstr "Default display mode"
+
 msgid "PREF_TAB_SETTINGS"
 msgstr "Settings"