-## Copyright (C) 2014-2017 CEA/DEN, EDF R&D
-##
-## This library is free software; you can redistribute it and/or
-## modify it under the terms of the GNU Lesser General Public
-## License as published by the Free Software Foundation; either
-## version 2.1 of the License, or (at your option) any later version.
-##
-## This library is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-## Lesser General Public License for more details.
-##
-## You should have received a copy of the GNU Lesser General Public
-## License along with this library; if not, write to the Free Software
-## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-##
-## See http:##www.salome-platform.org/ or
-## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
-##
+# Copyright (C) 2014-2023 CEA, EDF
+#
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+#
+# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
+#
"""
TestExtrusion.py
#=========================================================================
# Make extrusion on circle
#=========================================================================
-# Build shape from sketcher results
-aCircleSketchResult = aCircleSketchFeature.firstResult()
-aCircleSketchEdges = modelAPI_ResultConstruction(aCircleSketchResult).shape()
-origin = geomDataAPI_Point(aCircleSketchFeature.attribute("Origin")).pnt()
-dirX = geomDataAPI_Dir(aCircleSketchFeature.attribute("DirX")).dir()
-norm = geomDataAPI_Dir(aCircleSketchFeature.attribute("Norm")).dir()
-aCircleSketchFaces = ShapeList()
-GeomAlgoAPI_SketchBuilder.createFaces(
- origin, dirX, norm, aCircleSketchEdges, aCircleSketchFaces)
-assert (len(aCircleSketchFaces) > 0)
-assert (aCircleSketchFaces[0] is not None)
+# Build face from sketcher results
+aCircleSketchResult = modelAPI_ResultConstruction(aCircleSketchFeature.firstResult())
+assert (aCircleSketchResult.facesNum() > 0)
# Create extrusion
aSession.startOperation()
anExtrusionFt = aPart.addFeature("Extrusion")
assert (anExtrusionFt.getKind() == "Extrusion")
# selection type FACE=4
anExtrusionFt.selectionList("base").append(
- aCircleSketchResult, aCircleSketchFaces[0])
+ aCircleSketchResult, aCircleSketchResult.face(0))
anExtrusionFt.string("CreationMethod").setValue("BySizes")
anExtrusionFt.real("to_size").setValue(50)
anExtrusionFt.real("from_size").setValue(0)
anExtrusionFt = aPart.addFeature("Extrusion")
assert (anExtrusionFt.getKind() == "Extrusion")
# selection type FACE=4
-anExtrusionFt.selectionList("base").append(
- aCircleSketchResult, aCircleSketchFaces[0])
+anExtrusionFt.selectionList("base").append(aCircleSketchResult, aCircleSketchResult.face(0))
anExtrusionFt.string("CreationMethod").setValue("ByPlanesAndOffsets")
anExtrusionFt.real("to_size").setValue(0) #TODO: remove
anExtrusionFt.real("from_size").setValue(0) #TODO: remove
# Check extrusion volume
aRefVolume = 100530.96491487337
-aResVolume = GeomAlgoAPI_ShapeTools_volume(anExtrusionResult.shape())
+aResVolume = GeomAlgoAPI_ShapeTools.volume(anExtrusionResult.shape())
assert (math.fabs(aResVolume - aRefVolume) < 10 ** -5)
#=========================================================================
aSession.finishOperation()
# Extrude clamp
-aClampSketchResult = aClampSketchFeature.firstResult()
-aClampSketchEdges = modelAPI_ResultConstruction(aClampSketchResult).shape()
-origin = geomDataAPI_Point(aClampSketchFeature.attribute("Origin")).pnt()
-dirX = geomDataAPI_Dir(aClampSketchFeature.attribute("DirX")).dir()
-norm = geomDataAPI_Dir(aClampSketchFeature.attribute("Norm")).dir()
-aClampSketchFaces = ShapeList()
-GeomAlgoAPI_SketchBuilder.createFaces(
- origin, dirX, norm, aClampSketchEdges, aClampSketchFaces)
+aClampSketchResult = modelAPI_ResultConstruction(aClampSketchFeature.firstResult())
aSession.startOperation()
aClampExtrusionFt = aPart.addFeature("Extrusion")
assert (aClampExtrusionFt.getKind() == "Extrusion")
# selection type FACE=4
aClampExtrusionFt.selectionList("base").append(
- aClampSketchResult, aClampSketchFaces[0])
+ aClampSketchResult, aClampSketchResult.face(0))
aClampExtrusionFt.string("CreationMethod").setValue("BySizes")
aClampExtrusionFt.real("to_size").setValue(70)
aClampExtrusionFt.real("from_size").setValue(0)
anExtrusionFt = aPart.addFeature("Extrusion")
assert (anExtrusionFt.getKind() == "Extrusion")
# selection type FACE=4
-anExtrusionFt.selectionList("base").append(
- aCircleSketchResult, aCircleSketchFaces[0])
+anExtrusionFt.selectionList("base").append(aCircleSketchResult, aCircleSketchResult.face(0))
anExtrusionFt.string("CreationMethod").setValue("ByPlanesAndOffsets")
anExtrusionFt.real("to_size").setValue(0) #TODO: remove
anExtrusionFt.real("from_size").setValue(0) #TODO: remove
-anExtrusionFt.selection("to_object").selectSubShape("face", "Extrusion_3_1/Generated_Face_2")
+anExtrusionFt.selection("to_object").selectSubShape("face", "Extrusion_3_1/Generated_Face&Sketch_2/SketchLine_3")
anExtrusionFt.real("to_offset").setValue(0)
-anExtrusionFt.selection("from_object").selectSubShape("face", "Extrusion_3_1/Generated_Face_1")
+anExtrusionFt.selection("from_object").selectSubShape("face", "Extrusion_3_1/Generated_Face&Sketch_2/SketchLine_4")
anExtrusionFt.real("from_offset").setValue(0)
anExtrusionFt.execute()
aSession.finishOperation()
