-## Copyright (C) 2014-2017 CEA/DEN, EDF R&D
-##
-## This library is free software; you can redistribute it and/or
-## modify it under the terms of the GNU Lesser General Public
-## License as published by the Free Software Foundation; either
-## version 2.1 of the License, or (at your option) any later version.
-##
-## This library is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-## Lesser General Public License for more details.
-##
-## You should have received a copy of the GNU Lesser General Public
-## License along with this library; if not, write to the Free Software
-## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-##
-## See http:##www.salome-platform.org/ or
-## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
-##
+# Copyright (C) 2014-2019 CEA/DEN, EDF R&D
+#
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+#
+# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
+#
# The test for correct selection of a whole feautre as argument of other feature: select all extrusions
# produced from the scetch, then change the number of sketch contours, so, anytway all extrusions must
SketchConstraintLength_2 = Sketch_1.setLength(SketchLine_6.result(), "Lgx")
SketchConstraintRadius_1 = Sketch_1.setRadius(SketchArc_1.results()[1], "Ray")
model.do()
-Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchLine_1r-SketchLine_3r-SketchArc_1_2f-SketchLine_4r-SketchLine_6r")], model.selection(), 0, "Lgy")
-Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_1"))
+Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchLine_6r-SketchLine_4r-SketchArc_1_2f-SketchLine_3r-SketchLine_1r")], model.selection(), 0, "Lgy")
+Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_1"))
SketchLine_7 = Sketch_2.addLine(0, -75, 0, 0)
-SketchProjection_4 = Sketch_2.addProjection(model.selection("VERTEX", "Sketch_1/Vertex-SketchLine_3s-SketchLine_1e"), False)
+SketchProjection_4 = Sketch_2.addProjection(model.selection("VERTEX", "Sketch_1/SketchLine_1_EndVertex"), False)
SketchPoint_2 = SketchProjection_4.createdFeature()
SketchConstraintCoincidence_9 = Sketch_2.setCoincident(SketchLine_7.startPoint(), SketchPoint_2.result())
-SketchProjection_5 = Sketch_2.addProjection(model.selection("VERTEX", "Extrusion_1_1/Generated_Face_5&Extrusion_1_1/Generated_Face_1&Extrusion_1_1/To_Face_1"), False)
+SketchProjection_5 = Sketch_2.addProjection(model.selection("VERTEX", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_6][Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_1][Extrusion_1_1/To_Face]"), False)
SketchPoint_3 = SketchProjection_5.createdFeature()
SketchConstraintCoincidence_10 = Sketch_2.setCoincident(SketchLine_7.endPoint(), SketchPoint_3.result())
SketchLine_8 = Sketch_2.addLine(0, 0, 60, 0)
SketchConstraintCoincidence_11 = Sketch_2.setCoincident(SketchLine_7.endPoint(), SketchLine_8.startPoint())
-SketchProjection_6 = Sketch_2.addProjection(model.selection("VERTEX", "Extrusion_1_1/Generated_Face_5&Extrusion_1_1/Generated_Face_1&Extrusion_1_1/From_Face_1"), False)
+SketchProjection_6 = Sketch_2.addProjection(model.selection("VERTEX", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_6][Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_1][Extrusion_1_1/From_Face]"), False)
SketchPoint_4 = SketchProjection_6.createdFeature()
SketchConstraintCoincidence_12 = Sketch_2.setCoincident(SketchLine_8.endPoint(), SketchPoint_4.result())
SketchLine_9 = Sketch_2.addLine(60, 0, 59.99999999999999, -62.5)
SketchConstraintCoincidence_13 = Sketch_2.setCoincident(SketchLine_8.endPoint(), SketchLine_9.startPoint())
-SketchProjection_7 = Sketch_2.addProjection(model.selection("EDGE", "Extrusion_1_1/Generated_Face_1&Extrusion_1_1/From_Face_1"), False)
+SketchProjection_7 = Sketch_2.addProjection(model.selection("EDGE", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_1][Extrusion_1_1/From_Face]"), False)
SketchLine_10 = SketchProjection_7.createdFeature()
SketchConstraintCoincidence_14 = Sketch_2.setCoincident(SketchLine_9.endPoint(), SketchLine_10.result())
SketchLine_11 = Sketch_2.addLine(0, -75, 47.49999999999999, -75)
SketchConstraintCoincidence_15 = Sketch_2.setCoincident(SketchLine_7.startPoint(), SketchLine_11.startPoint())
-SketchProjection_8 = Sketch_2.addProjection(model.selection("EDGE", "Extrusion_1_1/Generated_Face_2&Extrusion_1_1/Generated_Face_1"), False)
+SketchProjection_8 = Sketch_2.addProjection(model.selection("EDGE", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_3][Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_1]"), False)
SketchLine_12 = SketchProjection_8.createdFeature()
SketchConstraintCoincidence_16 = Sketch_2.setCoincident(SketchLine_11.endPoint(), SketchLine_12.result())
SketchArc_2 = Sketch_2.addArc(47.49999999999999, -62.5, 59.99999999999999, -62.5, 47.49999999999999, -75, True)
SketchConstraintTangent_3 = Sketch_2.setTangent(SketchArc_2.results()[1], SketchLine_11.result())
SketchConstraintTangent_4 = Sketch_2.setTangent(SketchLine_9.result(), SketchArc_2.results()[1])
model.do()
-Extrusion_2 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_2/Face-SketchLine_7r-SketchLine_8r-SketchLine_9r-SketchLine_11f-SketchArc_2_2f")], model.selection(), 0, "Lgx")
+Extrusion_2 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_2/Face-SketchLine_11f-SketchArc_2_2f-SketchLine_9r-SketchLine_8r-SketchLine_7r")], model.selection(), 0, "Lgx")
Common_1 = model.addCommon(Part_1_doc, [model.selection("SOLID", "Extrusion_1_1"), model.selection("SOLID", "Extrusion_2_1")])
+model.do()
model.end()
assert(len(Common_1.results()) == 1)
