<?xml version="1.0" encoding="utf-8"?>
<!DOCTYPE TS>
<TS version="2.0" language="en_US">
+
<context>
- <name>Extrusion</name>
+ <name>Extrusion:GeomValidators_ZeroOffset</name>
<message>
- <source>GeomValidators_ZeroOffset: FromSize = -ToSize and bounding planes are coincident.</source>
+ <source>FromSize = -ToSize and bounding planes are coincident.</source>
<translation>FromSize = -ToSize and bounding planes are coincident.</translation>
</message>
+ </context>
+ <context>
+ <name>Extrusion:Model_FeatureValidator</name>
<message>
- <source>Model_FeatureValidator: Attribute "base" is not initialized.</source>
+ <source>Attribute "base" is not initialized.</source>
<translation>Base object for extrusion is not selected.</translation>
</message>
+ </context>
+ <context>
+ <name>Extrusion:sketch:FeaturesPlugin_ValidatorCompositeLauncher</name>
<message>
- <source>sketch - FeaturesPlugin_ValidatorCompositeLauncher: The object is empty</source>
+ <source>The object is empty</source>
<translation>Object is not selected.</translation>
</message>
+ </context>
+ <context>
+ <name>Extrusion:GeomValidators_ZeroOffset</name>
<message>
- <source>GeomValidators_ZeroOffset: ToSize = -FromSize.</source>
+ <source>ToSize = -FromSize.</source>
<translation>ToSize = -FromSize.</translation>
</message>
-
+ </context>
+ <context>
+ <name>Extrusion:FeaturesPlugin_ValidatorExtrusionDir</name>
<message>
- <source>FeaturesPlugin_ValidatorExtrusionDir: Error: Validator should be used with 2 parameters for extrusion.</source>
+ <source>Error: Validator should be used with 2 parameters for extrusion.</source>
<translation>Validator "FeaturesPlugin_ValidatorExtrusionDir" should be used with 2 parameters for extrusion.</translation>
</message>
+ </context>
+ <context>
+ <name>Extrusion:FeaturesPlugin_ValidatorExtrusionDir</name>
<message>
- <source>FeaturesPlugin_ValidatorExtrusionDir: Error: Direction is parallel to one of the selected face or face on selected shell.</source>
+ <source>Error: Direction is parallel to one of the selected face or face on selected shell.</source>
<translation>Direction is parallel to one of the selected face or face on selected shell.</translation>
</message>
-
+ </context>
+ <context>
+ <name>Extrusion:Model_FeatureValidator</name>
<message>
- <source>Model_FeatureValidator: Attribute "sketch" is not initialized.</source>
+ <source>Attribute "sketch" is not initialized.</source>
<translation>Base object for extrusion is not selected.</translation>
</message>
+ </context>
+ <context>
+ <name>Extrusion:Model_FeatureValidator</name>
<message>
- <source>Model_FeatureValidator: Attribute "base" is not initialized.</source>
+ <source>Attribute "base" is not initialized.</source>
<translation>Base object for extrusion is not selected.</translation>
</message>
+ </context>
+ <context>
+ <name>Extrusion:Model_FeatureValidator</name>
<message>
- <source>Model_FeatureValidator: Attribute "direction_object" is not initialized.</source>
+ <source>Attribute "direction_object" is not initialized.</source>
<translation>Direction object for extrusion is not selected.</translation>
</message>
+ </context>
+ <context>
+ <name>Extrusion:Model_FeatureValidator</name>
<message>
- <source>Model_FeatureValidator: Attribute "to_size" is not initialized.</source>
+ <source>Attribute "to_size" is not initialized.</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>Extrusion:Model_FeatureValidator</name>
<message>
- <source>Model_FeatureValidator: Attribute "from_size" is not initialized.</source>
+ <source>Attribute "from_size" is not initialized.</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>Extrusion:Model_FeatureValidator</name>
<message>
- <source>Model_FeatureValidator: Attribute "from_object" is not initialized.</source>
+ <source>Attribute "from_object" is not initialized.</source>
<translation>From object for extrusion is not selected.</translation>
</message>
+ </context>
+ <context>
+ <name>Extrusion:Model_FeatureValidator</name>
<message>
- <source>Model_FeatureValidator: Attribute "from_offset" is not initialized.</source>
+ <source>Attribute "from_offset" is not initialized.</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>Extrusion:Model_FeatureValidator</name>
<message>
- <source>Model_FeatureValidator: Attribute "to_object" is not initialized.</source>
+ <source>Attribute "to_object" is not initialized.</source>
<translation>To object for extrusion is not selected.</translation>
</message>
+ </context>
+ <context>
+ <name>Extrusion:Model_FeatureValidator</name>
<message>
- <source>Model_FeatureValidator: Attribute "to_offset" is not initialized.</source>
+ <source>Attribute "to_offset" is not initialized.</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>Extrusion:sketch:FeaturesPlugin_ValidatorCompositeLauncher</name>
<message>
- <source>sketch - FeaturesPlugin_ValidatorCompositeLauncher: Error: The attribute with the %1 type is not processed</source>
+ <source>Error: The attribute with the %1 type is not processed</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>Extrusion:sketch:FeaturesPlugin_ValidatorCompositeLauncher</name>
<message>
- <source>sketch - FeaturesPlugin_ValidatorCompositeLauncher: Error: Wrong parameters in XML definition for %1 type</source>
+ <source>Error: Wrong parameters in XML definition for %1 type</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>Extrusion:sketch:FeaturesPlugin_ValidatorCompositeLauncher</name>
<message>
- <source>sketch - FeaturesPlugin_ValidatorCompositeLauncher: Wrong parameters in XML definition for %1 type</source>
+ <source>Wrong parameters in XML definition for %1 type</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>Extrusion:base:FeaturesPlugin_ValidatorBaseForGeneration</name>
<message>
- <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Validator parameters is empty.</source>
+ <source>Error: Validator parameters is empty.</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>Extrusion:base:FeaturesPlugin_ValidatorBaseForGeneration</name>
<message>
- <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Attribute contains unacceptable shape.</source>
+ <source>Error: Attribute contains unacceptable shape.</source>
<translation>Shape with unacceptable type selected.</translation>
</message>
+ </context>
+ <context>
+ <name>Extrusion:base:FeaturesPlugin_ValidatorBaseForGeneration</name>
<message>
- <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Empty context.</source>
+ <source>Error: Empty context.</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>Extrusion:base:FeaturesPlugin_ValidatorBaseForGeneration</name>
<message>
- <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Compound should contain only faces and edges.</source>
+ <source>Error: Compound should contain only faces and edges.</source>
<translation>Compound should contain only faces and edges.</translation>
</message>
+ </context>
+ <context>
+ <name>Extrusion:base:FeaturesPlugin_ValidatorBaseForGeneration</name>
<message>
- <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Object from this sketch is already selected. Sketch is not allowed for selection.</source>
+ <source>Error: Object from this sketch is already selected. Sketch is not allowed for selection.</source>
<translation>Object from this sketch is already selected. Sketch is not allowed for selection.</translation>
</message>
+ </context>
+ <context>
+ <name>Extrusion:base:FeaturesPlugin_ValidatorBaseForGeneration</name>
<message>
- <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Whole sketch with this object is already selected. Don't allow to select this object.</source>
+ <source>Error: Whole sketch with this object is already selected. Don't allow to select this object.</source>
<translation>Whole sketch with this object is already selected. Don't allow to select this object.</translation>
</message>
+ </context>
+ <context>
+ <name>Extrusion:base:FeaturesPlugin_ValidatorBaseForGeneration</name>
<message>
- <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Wire with wrong orientation selected.</source>
+ <source>Error: Wire with wrong orientation selected.</source>
<translation>Wire with wrong orientation selected.</translation>
</message>
+ </context>
+ <context>
+ <name>Extrusion:base:FeaturesPlugin_ValidatorBaseForGeneration</name>
<message>
- <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Objects with such wire already selected. Don't allow to select this object.</source>
+ <source>Error: Objects with such wire already selected. Don't allow to select this object.</source>
<translation>Objects with such wire already selected. Don't allow to select this object.</translation>
</message>
+ </context>
+ <context>
+ <name>Extrusion:base:FeaturesPlugin_ValidatorBaseForGeneration</name>
<message>
- <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Empty attribute.</source>
+ <source>Error: Empty attribute.</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>Extrusion:base:FeaturesPlugin_ValidatorBaseForGeneration</name>
<message>
- <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Attribute have empty context.</source>
+ <source>Error: Attribute have empty context.</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>Extrusion:base:FeaturesPlugin_ValidatorBaseForGeneration</name>
<message>
- <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Empty shape selected</source>
+ <source>Error: Empty shape selected</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>Extrusion:base:FeaturesPlugin_ValidatorBaseForGeneration</name>
<message>
- <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Infinite constructions is not allowed as base.</source>
+ <source>Error: Infinite constructions is not allowed as base.</source>
<translation>Infinite constructions is not allowed as base.</translation>
</message>
+ </context>
+ <context>
+ <name>Extrusion:base:FeaturesPlugin_ValidatorBaseForGeneration</name>
<message>
- <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Selected shape is in the local selection. Only global selection is allowed.</source>
+ <source>Error: Selected shape is in the local selection. Only global selection is allowed.</source>
<translation>Selected shape is in the local selection. Only global selection is allowed.</translation>
</message>
+ </context>
+ <context>
+ <name>Extrusion:base:FeaturesPlugin_ValidatorBaseForGeneration</name>
<message>
- <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Selected shape has unacceptable type. Acceptable types are: faces or wires on sketch, whole sketch(if it has at least one face), and whole objects with shape types: %1</source>
+ <source>Error: Selected shape has unacceptable type. Acceptable types are: faces or wires on sketch, whole sketch(if it has at least one face), and whole objects with shape types: %1</source>
<translation>Selected shape has unacceptable type. Acceptable types are: faces or wires on sketch, whole sketch(if it has at least one face), and whole objects with shape types: %1</translation>
</message>
+ </context>
+ <context>
+ <name>Extrusion:base :FeaturesPlugin_ValidatorBaseForGeneration</name>
<message>
- <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Attribute \"%1\" does not supported by this validator.</source>
+ <source>Error: Attribute \"%1\" does not supported by this validator.</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>Extrusion:direction_object:GeomValidators_ShapeType</name>
<message>
- <source>direction_object - GeomValidators_ShapeType: It does not contain element with acceptable shape type. The type should be one of the next: %1</source>
+ <source>It does not contain element with acceptable shape type. The type should be one of the next: %1</source>
<translation>It does not contain element with acceptable shape type. The type should be one of the next: %1</translation>
</message>
+ </context>
+ <context>
+ <name>Extrusion:direction_object:GeomValidators_ShapeType</name>
<message>
- <source>direction_object - GeomValidators_ShapeType: It has reference to an empty attribute</source>
+ <source>It has reference to an empty attribute</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>Extrusion:direction_object:GeomValidators_ShapeType</name>
<message>
- <source>direction_object - GeomValidators_ShapeType: Shape type is \"%1\", it should be \"%2\"</source>
+ <source>Shape type is \"%1\", it should be \"%2\"</source>
<translation>Shape type is "%1", it should be "%2"</translation>
</message>
+ </context>
+ <context>
+ <name>Extrusion:direction_object:GeomValidators_ShapeType</name>
<message>
- <source>direction_object - GeomValidators_ShapeType: The attribute with the %1 type is not processed</source>
+ <source>The attribute with the %1 type is not processed</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>Extrusion:direction_object:GeomValidators_ShapeType</name>
<message>
- <source>direction_object - GeomValidators_ShapeType: The object is empty</source>
+ <source>The object is empty</source>
<translation>Direction object not selected.</translation>
</message>
+ </context>
+ <context>
+ <name>Extrusion:direction_object:GeomValidators_ShapeType</name>
<message>
- <source>direction_object - GeomValidators_ShapeType: The result is empty</source>
+ <source>The result is empty</source>
<translation>Direction object not selected.</translation>
</message>
+ </context>
+ <context>
+ <name>Extrusion:direction_object:GeomValidators_ShapeType</name>
<message>
- <source>direction_object - GeomValidators_ShapeType: The shape is empty</source>
+ <source>The shape is empty</source>
<translation>Direction object not selected.</translation>
</message>
+ </context>
+ <context>
+ <name>Extrusion:from_object:GeomValidators_Face</name>
<message>
- <source>from_object - GeomValidators_Face: The attribute with the %1 type is not processed</source>
+ <source>The attribute with the %1 type is not processed</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>Extrusion:from_object:GeomValidators_Face</name>
<message>
- <source>from_object - GeomValidators_Face: The shape is not a face.</source>
+ <source>The shape is not a face.</source>
<translation>"From" should be a planar face.</translation>
</message>
+ </context>
+ <context>
+ <name>Extrusion:from_object:GeomValidators_Face</name>
<message>
- <source>from_object - GeomValidators_Face: The shape is not a face.</source>
+ <source>The shape is not a face.</source>
<translation>"From" should be a planar face.</translation>
</message>
+ </context>
+ <context>
+ <name>Extrusion:from_object:GeomValidators_Face</name>
<message>
- <source>from_object - GeomValidators_Face: The shape is not a plane.</source>
+ <source>The shape is not a plane.</source>
<translation>"From" should be a planar face.</translation>
</message>
+ </context>
+ <context>
+ <name>Extrusion:from_object:GeomValidators_Face</name>
<message>
- <source>from_object - GeomValidators_Face: The shape is not a cylinder.</source>
- <translation></translation>
+ <source>The shape is not a cylinder.</source>
+ <translation>The shape is not a cylinder.</translation>
</message>
+ </context>
+ <context>
+ <name>Extrusion:from_object:GeomValidators_Face</name>
<message>
- <source>from_object - GeomValidators_Face: The shape is not an available face.</source>
- <translation></translation>
+ <source>The shape is not an available face.</source>
+ <translation>The shape is not an available face.</translation>
</message>
+ </context>
+ <context>
+ <name>Extrusion:to_object:GeomValidators_Face</name>
<message>
- <source>to_object - GeomValidators_Face: The attribute with the %1 type is not processed</source>
+ <source>The attribute with the %1 type is not processed</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>Extrusion:to_object:GeomValidators_Face</name>
<message>
- <source>to_object - GeomValidators_Face: The shape is not a face.</source>
+ <source>The shape is not a face.</source>
<translation>"To" should be a planar face.</translation>
</message>
+ </context>
+ <context>
+ <name>Extrusion:to_object:GeomValidators_Face</name>
<message>
- <source>to_object - GeomValidators_Face: The shape is not a face.</source>
+ <source>The shape is not a face.</source>
<translation>"To" should be a planar face.</translation>
</message>
+ </context>
+ <context>
+ <name>Extrusion:to_object:GeomValidators_Face</name>
<message>
- <source>to_object - GeomValidators_Face: The shape is not a plane.</source>
+ <source>The shape is not a plane.</source>
<translation>"To" should be a planar face.</translation>
</message>
+ </context>
+ <context>
+ <name>Extrusion:to_object:GeomValidators_Face</name>
<message>
- <source>to_object - GeomValidators_Face: The shape is not a cylinder.</source>
- <translation></translation>
+ <source>The shape is not a cylinder.</source>
+ <translation>The shape is not a cylinder.</translation>
</message>
+ </context>
+ <context>
+ <name>Extrusion:to_object:GeomValidators_Face</name>
<message>
- <source>to_object - GeomValidators_Face: The shape is not an available face.</source>
- <translation></translation>
+ <source>The shape is not an available face.</source>
+ <translation>The shape is not an available face.</translation>
</message>
+ </context>
+ <context>
+ <name>Extrusion:GeomValidators_ZeroOffset</name>
<message>
- <source>GeomValidators_ZeroOffset: Wrong number of validator arguments in xml(expected 9).</source>
- <translation></translation>
+ <source>Wrong number of validator arguments in xml(expected 9).</source>
+ <translation>Wrong number of validator arguments in xml(expected 9).</translation>
</message>
+ </context>
+ <context>
+ <name>Extrusion:GeomValidators_ZeroOffset</name>
<message>
- <source>GeomValidators_ZeroOffset: ToSize = -FromSize.</source>
+ <source>ToSize = -FromSize.</source>
<translation>ToSize = -FromSize.</translation>
</message>
+ </context>
+ <context>
+ <name>Extrusion:GeomValidators_ZeroOffset</name>
<message>
- <source>GeomValidators_ZeroOffset: From face selection is invalid.</source>
+ <source>From face selection is invalid.</source>
<translation>From face selection is invalid.</translation>
</message>
+ </context>
+ <context>
+ <name>Extrusion:GeomValidators_ZeroOffset</name>
<message>
- <source>GeomValidators_ZeroOffset: To face selection is invalid.</source>
+ <source>To face selection is invalid.</source>
<translation>To face selection is invalid.</translation>
</message>
+ </context>
+ <context>
+ <name>Extrusion:GeomValidators_ZeroOffset</name>
<message>
- <source>GeomValidators_ZeroOffset: From face selection is invalid.</source>
+ <source>From face selection is invalid.</source>
<translation>From face selection is invalid.</translation>
</message>
+ </context>
+ <context>
+ <name>Extrusion:GeomValidators_ZeroOffset</name>
<message>
- <source>GeomValidators_ZeroOffset: To face selection is invalid.</source>
+ <source>To face selection is invalid.</source>
<translation>To face selection is invalid.</translation>
</message>
+ </context>
+ <context>
+ <name>Extrusion:GeomValidators_ZeroOffset</name>
<message>
- <source>GeomValidators_ZeroOffset: FromSize = -ToSize and bounding planes are coincident.</source>
+ <source>FromSize = -ToSize and bounding planes are coincident.</source>
<translation>FromSize = -ToSize and bounding planes are coincident.</translation>
</message>
+ </context>
+ <context>
+ <name>Extrusion:FeaturesPlugin_ValidatorExtrusionDir</name>
<message>
- <source>FeaturesPlugin_ValidatorExtrusionDir: Error: Base objects list contains vertex or edge, so attribute "direction_object" can not be used with default value. Select direction for extrusion.</source>
+ <source>Error: Base objects list contains vertex or edge, so attribute "direction_object" can not be used with default value. Select direction for extrusion.</source>
<translation>Base objects list contains vertex or edge, so default direction cannot be used. Select direction for extrusion.</translation>
</message>
</context>
-
+
<context>
- <name>ExtrusionCut</name>
+ <name>ExtrusionCut:GeomValidators_ZeroOffset</name>
<message>
- <source>GeomValidators_ZeroOffset: FromSize = -ToSize and bounding planes are coincident.</source>
+ <source>FromSize = -ToSize and bounding planes are coincident.</source>
<translation>FromSize = -ToSize and bounding planes are coincident.</translation>
</message>
+ </context>
+ <context>
+ <name>ExtrusionCut:Model_FeatureValidator</name>
<message>
- <source>Model_FeatureValidator: Attribute "base" is not initialized.</source>
+ <source> Attribute "base" is not initialized.</source>
<translation>Base object for extrusion is not selected.</translation>
</message>
+ </context>
+ <context>
+ <name>ExtrusionCut:main_objects:GeomValidators_ShapeType</name>
<message>
- <source>main_objects - GeomValidators_ShapeType: It does not contain element with acceptable shape type. The type should be one of the next: </source>
+ <source>It does not contain element with acceptable shape type. The type should be one of the next: </source>
<translation>Selected objects contain element with unacceptable shape type.</translation>
</message>
+ </context>
+ <context>
+ <name>ExtrusionCut:sketch:FeaturesPlugin_ValidatorCompositeLauncher</name>
<message>
- <source>sketch - FeaturesPlugin_ValidatorCompositeLauncher: The object is empty</source>
+ <source>The object is empty</source>
<translation>Object is not selected.</translation>
</message>
+ </context>
+ <context>
+ <name>ExtrusionCut:sketch:FeaturesPlugin_ValidatorCompositeLauncher</name>
<message>
- <source>sketch - FeaturesPlugin_ValidatorCompositeLauncher: The result is empty</source>
+ <source>The result is empty</source>
<translation>Object is not selected.</translation>
</message>
-
+ </context>
+ <context>
+ <name>ExtrusionCut:FeaturesPlugin_ValidatorExtrusionDir</name>
<message>
- <source>FeaturesPlugin_ValidatorExtrusionDir: Error: Validator should be used with 2 parameters for extrusion.</source>
+ <source>Error: Validator should be used with 2 parameters for extrusion.</source>
<translation>Validator "FeaturesPlugin_ValidatorExtrusionDir" should be used with 2 parameters for extrusion.</translation>
</message>
+ </context>
+ <context>
+ <name>ExtrusionCut:FeaturesPlugin_ValidatorExtrusionDir</name>
<message>
- <source>FeaturesPlugin_ValidatorExtrusionDir: Error: Direction is parallel to one of the selected face or face on selected shell.</source>
+ <source>Error: Direction is parallel to one of the selected face or face on selected shell.</source>
<translation>Direction is parallel to one of the selected face or face on selected shell.</translation>
</message>
-
+ </context>
+ <context>
+ <name>ExtrusionCut:Model_FeatureValidator</name>
<message>
- <source>Model_FeatureValidator: Attribute "sketch" is not initialized.</source>
+ <source>Attribute "sketch" is not initialized.</source>
<translation>Base object for extrusion is not selected.</translation>
</message>
+ </context>
+ <context>
+ <name>ExtrusionCut:Model_FeatureValidator</name>
<message>
- <source>Model_FeatureValidator: Attribute "direction_object" is not initialized.</source>
+ <source>Attribute "direction_object" is not initialized.</source>
<translation>Direction object for extrusion is not selected.</translation>
</message>
+ </context>
+ <context>
+ <name>ExtrusionCut:Model_FeatureValidator</name>
<message>
- <source>Model_FeatureValidator: Attribute "to_size" is not initialized.</source>
+ <source>Attribute "to_size" is not initialized.</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>ExtrusionCut:Model_FeatureValidator</name>
<message>
- <source>Model_FeatureValidator: Attribute "from_size" is not initialized.</source>
+ <source>Attribute "from_size" is not initialized.</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>ExtrusionCut:Model_FeatureValidator</name>
<message>
- <source>Model_FeatureValidator: Attribute "from_object" is not initialized.</source>
+ <source>Attribute "from_object" is not initialized.</source>
<translation>From object for extrusion is not selected.</translation>
</message>
+ </context>
+ <context>
+ <name>ExtrusionCut:Model_FeatureValidator</name>
<message>
- <source>Model_FeatureValidator: Attribute "from_offset" is not initialized.</source>
+ <source>Attribute "from_offset" is not initialized.</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>ExtrusionCut:Model_FeatureValidator</name>
<message>
- <source>Model_FeatureValidator: Attribute "to_object" is not initialized.</source>
+ <source>Attribute "to_object" is not initialized.</source>
<translation>To object for extrusion is not selected.</translation>
</message>
+ </context>
+ <context>
+ <name>ExtrusionCut:Model_FeatureValidator</name>
<message>
- <source>Model_FeatureValidator: Attribute "to_offset" is not initialized.</source>
- <translation></translation>
+ <source>Attribute "to_offset" is not initialized.</source>
+ <translation>Enter "To" offset.</translation>
</message>
+ </context>
+ <context>
+ <name>ExtrusionCut:Model_FeatureValidator</name>
<message>
- <source>Model_FeatureValidator: Attribute "main_objects" is not initialized.</source>
+ <source>Attribute "main_objects" is not initialized.</source>
<translation>Objects for cut are not selected.</translation>
</message>
+ </context>
+ <context>
+ <name>ExtrusionCut:sketch:FeaturesPlugin_ValidatorCompositeLauncher</name>
<message>
- <source>sketch - FeaturesPlugin_ValidatorCompositeLauncher: Error: The attribute with the %1 type is not processed</source>
+ <source>Error: The attribute with the %1 type is not processed</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>ExtrusionCut:sketch:FeaturesPlugin_ValidatorCompositeLauncher</name>
<message>
- <source>sketch - FeaturesPlugin_ValidatorCompositeLauncher: Error: Wrong parameters in XML definition for %1 type</source>
+ <source>Error: Wrong parameters in XML definition for %1 type</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>ExtrusionCut:sketch:FeaturesPlugin_ValidatorCompositeLauncher</name>
<message>
- <source>sketch - FeaturesPlugin_ValidatorCompositeLauncher: Wrong parameters in XML definition for %1 type</source>
+ <source>Wrong parameters in XML definition for %1 type</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>ExtrusionCut:base:FeaturesPlugin_ValidatorBaseForGeneration</name>
<message>
- <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Validator parameters is empty.</source>
+ <source>Error: Validator parameters is empty.</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>ExtrusionCut:base:FeaturesPlugin_ValidatorBaseForGeneration</name>
<message>
- <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Attribute contains unacceptable shape.</source>
+ <source>Error: Attribute contains unacceptable shape.</source>
<translation>Shape with unacceptable type selected.</translation>
</message>
+ </context>
+ <context>
+ <name>ExtrusionCut:base:FeaturesPlugin_ValidatorBaseForGeneration</name>
<message>
- <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Empty context.</source>
+ <source>Error: Empty context.</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>ExtrusionCut:base:FeaturesPlugin_ValidatorBaseForGeneration</name>
<message>
- <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Compound should contain only faces and edges.</source>
+ <source>Error: Compound should contain only faces and edges.</source>
<translation>Compound should contain only faces and edges.</translation>
</message>
+ </context>
+ <context>
+ <name>ExtrusionCut:base:FeaturesPlugin_ValidatorBaseForGeneration</name>
<message>
- <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Object from this sketch is already selected. Sketch is not allowed for selection.</source>
+ <source>Error: Object from this sketch is already selected. Sketch is not allowed for selection.</source>
<translation>Object from this sketch is already selected. Sketch is not allowed for selection.</translation>
</message>
+ </context>
+ <context>
+ <name>ExtrusionCut:base:FeaturesPlugin_ValidatorBaseForGeneration</name>
<message>
- <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Whole sketch with this object is already selected. Don't allow to select this object.</source>
+ <source>Error: Whole sketch with this object is already selected. Don't allow to select this object.</source>
<translation>Whole sketch with this object is already selected. Don't allow to select this object.</translation>
</message>
+ </context>
+ <context>
+ <name>ExtrusionCut:base:FeaturesPlugin_ValidatorBaseForGeneration</name>
<message>
- <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Wire with wrong orientation selected.</source>
+ <source>Error: Wire with wrong orientation selected.</source>
<translation>Wire with wrong orientation selected.</translation>
</message>
+ </context>
+ <context>
+ <name>ExtrusionCut:base:FeaturesPlugin_ValidatorBaseForGeneration</name>
<message>
- <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Objects with such wire already selected. Don't allow to select this object.</source>
+ <source>Error: Objects with such wire already selected. Don't allow to select this object.</source>
<translation>Objects with such wire already selected. Don't allow to select this object.</translation>
</message>
+ </context>
+ <context>
+ <name>ExtrusionCut:base:FeaturesPlugin_ValidatorBaseForGeneration</name>
<message>
- <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Empty attribute.</source>
- <translation></translation>
+ <source>Error: Empty attribute.</source>
+ <translation>Select base objects.</translation>
</message>
+ </context>
+ <context>
+ <name>ExtrusionCut</name>
<message>
<source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Attribute have empty context.</source>
- <translation></translation>
+ <translation>Selected object is invalid.</translation>
</message>
+ </context>
+ <context>
+ <name>ExtrusionCut:base:FeaturesPlugin_ValidatorBaseForGeneration</name>
<message>
- <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Empty shape selected</source>
- <translation></translation>
+ <source>Error: Empty shape selected</source>
+ <translation>Error: Empty shape selected</translation>
</message>
+ </context>
+ <context>
+ <name>ExtrusionCut:base:FeaturesPlugin_ValidatorBaseForGeneration</name>
<message>
- <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Infinite constructions is not allowed as base.</source>
+ <source>Error: Infinite constructions is not allowed as base.</source>
<translation>Infinite constructions is not allowed as base.</translation>
</message>
+ </context>
+ <context>
+ <name>ExtrusionCut:base:FeaturesPlugin_ValidatorBaseForGeneration</name>
<message>
- <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Selected shape is in the local selection. Only global selection is allowed.</source>
+ <source>Error: Selected shape is in the local selection. Only global selection is allowed.</source>
<translation>Selected shape is in the local selection. Only global selection is allowed.</translation>
</message>
+ </context>
+ <context>
+ <name>ExtrusionCut:base:FeaturesPlugin_ValidatorBaseForGeneration</name>
<message>
- <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Selected shape has unacceptable type. Acceptable types are: faces or wires on sketch, whole sketch(if it has at least one face), and whole objects with shape types: %1</source>
+ <source>Error: Selected shape has unacceptable type. Acceptable types are: faces or wires on sketch, whole sketch(if it has at least one face), and whole objects with shape types: %1</source>
<translation>Selected shape has unacceptable type. Acceptable types are: faces or wires on sketch, whole sketch(if it has at least one face), and whole objects with shape types: %1</translation>
</message>
+ </context>
+ <context>
+ <name>ExtrusionCut:base:FeaturesPlugin_ValidatorBaseForGeneration</name>
<message>
- <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Attribute \"%1\" does not supported by this validator.</source>
+ <source>Error: Attribute \"%1\" does not supported by this validator.</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>ExtrusionCut:direction_object:GeomValidators_ShapeType</name>
<message>
- <source>direction_object - GeomValidators_ShapeType: It does not contain element with acceptable shape type. The type should be one of the next: %1</source>
+ <source>It does not contain element with acceptable shape type. The type should be one of the next: %1</source>
<translation>It does not contain element with acceptable shape type. The type should be one of the next: %1</translation>
</message>
+ </context>
+ <context>
+ <name>ExtrusionCut:direction_object:GeomValidators_ShapeType</name>
<message>
- <source>direction_object - GeomValidators_ShapeType: It has reference to an empty attribute</source>
+ <source>It has reference to an empty attribute</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>ExtrusionCut:direction_object:GeomValidators_ShapeType</name>
<message>
- <source>direction_object - GeomValidators_ShapeType: Shape type is \"%1\", it should be \"%2\"</source>
+ <source>Shape type is \"%1\", it should be \"%2\"</source>
<translation>Shape type is "%1", it should be "%2"</translation>
</message>
+ </context>
+ <context>
+ <name>ExtrusionCut:direction_object:GeomValidators_ShapeType</name>
<message>
- <source>direction_object - GeomValidators_ShapeType: The attribute with the %1 type is not processed</source>
+ <source>The attribute with the %1 type is not processed</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>ExtrusionCut:direction_object:GeomValidators_ShapeType</name>
<message>
- <source>direction_object - GeomValidators_ShapeType: The object is empty</source>
+ <source>The object is empty</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>ExtrusionCut:direction_object:GeomValidators_ShapeType</name>
<message>
- <source>direction_object - GeomValidators_ShapeType: The result is empty</source>
+ <source>The result is empty</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>ExtrusionCut:direction_object:GeomValidators_ShapeType</name>
<message>
- <source>direction_object - GeomValidators_ShapeType: The shape is empty</source>
+ <source>The shape is empty</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>ExtrusionCut:from_object:GeomValidators_Face</name>
<message>
- <source>from_object - GeomValidators_Face: The attribute with the %1 type is not processed</source>
+ <source>The attribute with the %1 type is not processed</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>ExtrusionCut:from_object:GeomValidators_Face</name>
<message>
- <source>from_object - GeomValidators_Face: The shape is not a face.</source>
+ <source>The shape is not a face.</source>
<translation>"From" should be a planar face.</translation>
</message>
+ </context>
+ <context>
+ <name>ExtrusionCut:from_object:GeomValidators_Face</name>
<message>
- <source>from_object - GeomValidators_Face: The shape is not a face.</source>
+ <source>The shape is not a face.</source>
<translation>"From" should be a planar face.</translation>
</message>
+ </context>
+ <context>
+ <name>ExtrusionCut:from_object:GeomValidators_Face</name>
<message>
- <source>from_object - GeomValidators_Face: The shape is not a plane.</source>
+ <source>The shape is not a plane.</source>
<translation>"From" should be a planar face.</translation>
</message>
+ </context>
+ <context>
+ <name>ExtrusionCut:from_object:GeomValidators_Face</name>
<message>
- <source>from_object - GeomValidators_Face: The shape is not a cylinder.</source>
+ <source>The shape is not a cylinder.</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>ExtrusionCut:from_object:GeomValidators_Face</name>
<message>
- <source>from_object - GeomValidators_Face: The shape is not an available face.</source>
+ <source>The shape is not an available face.</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>ExtrusionCut:to_object:GeomValidators_Face</name>
<message>
- <source>to_object - GeomValidators_Face: The attribute with the %1 type is not processed</source>
+ <source>The attribute with the %1 type is not processed</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>ExtrusionCut:to_object:GeomValidators_Face</name>
<message>
- <source>to_object - GeomValidators_Face: The shape is not a face.</source>
+ <source>The shape is not a face.</source>
<translation>"To" should be a planar face.</translation>
</message>
+ </context>
+ <context>
+ <name>ExtrusionCut:to_object:GeomValidators_Face</name>
<message>
- <source>to_object - GeomValidators_Face: The shape is not a face.</source>
+ <source>The shape is not a face.</source>
<translation>"To" should be a planar face.</translation>
</message>
+ </context>
+ <context>
+ <name>ExtrusionCut:to_object:GeomValidators_Face</name>
<message>
- <source>to_object - GeomValidators_Face: The shape is not a plane.</source>
+ <source>The shape is not a plane.</source>
<translation>"To" should be a planar face.</translation>
</message>
+ </context>
+ <context>
+ <name>ExtrusionCut:to_object:GeomValidators_Face</name>
<message>
- <source>to_object - GeomValidators_Face: The shape is not a cylinder.</source>
+ <source>The shape is not a cylinder.</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>ExtrusionCut:to_object:GeomValidators_Face</name>
<message>
- <source>to_object - GeomValidators_Face: The shape is not an available face.</source>
+ <source>The shape is not an available face.</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>ExtrusionCut:main_objects:GeomValidators_ShapeType</name>
<message>
- <source>main_objects - GeomValidators_ShapeType: It does not contain element with acceptable shape type. The type should be one of the next: %1</source>
+ <source>It does not contain element with acceptable shape type. The type should be one of the next: %1</source>
<translation>It does not contain element with acceptable shape type. The type should be one of the next: %1</translation>
</message>
+ </context>
+ <context>
+ <name>ExtrusionCut:main_objects:GeomValidators_ShapeType</name>
<message>
- <source>main_objects - GeomValidators_ShapeType: It has reference to an empty attribute</source>
+ <source>It has reference to an empty attribute</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>ExtrusionCut:main_objects:GeomValidators_ShapeType</name>
<message>
- <source>main_objects - GeomValidators_ShapeType: Shape type is \"%1\", it should be \"%2\"</source>
+ <source>Shape type is \"%1\", it should be \"%2\"</source>
<translation>Shape type is "%1", it should be "%2"</translation>
</message>
+ </context>
+ <context>
+ <name>ExtrusionCut:main_objects:GeomValidators_ShapeType</name>
<message>
- <source>main_objects - GeomValidators_ShapeType: The attribute with the %1 type is not processed</source>
+ <source>The attribute with the %1 type is not processed</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>ExtrusionCut:main_objects:GeomValidators_ShapeType</name>
<message>
- <source>main_objects - GeomValidators_ShapeType: The object is empty</source>
+ <source>The object is empty</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>ExtrusionCut:main_objects:GeomValidators_ShapeType</name>
<message>
- <source>main_objects - GeomValidators_ShapeType: The result is empty</source>
+ <source>The result is empty</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>ExtrusionCut:main_objects:GeomValidators_ShapeType</name>
<message>
- <source>main_objects - GeomValidators_ShapeType: The shape is empty</source>
+ <source>The shape is empty</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>ExtrusionCut:GeomValidators_ZeroOffset</name>
<message>
- <source>GeomValidators_ZeroOffset: Wrong number of validator arguments in xml(expected 9).</source>
+ <source>Wrong number of validator arguments in xml(expected 9).</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>ExtrusionCut:GeomValidators_ZeroOffset</name>
<message>
- <source>GeomValidators_ZeroOffset: ToSize = -FromSize.</source>
+ <source>ToSize = -FromSize.</source>
<translation>ToSize = -FromSize.</translation>
</message>
+ </context>
+ <context>
+ <name>ExtrusionCut:GeomValidators_ZeroOffset</name>
<message>
- <source>GeomValidators_ZeroOffset: From face selection is invalid.</source>
+ <source>From face selection is invalid.</source>
<translation>From face selection is invalid.</translation>
</message>
+ </context>
+ <context>
+ <name>ExtrusionCut:GeomValidators_ZeroOffset</name>
<message>
- <source>GeomValidators_ZeroOffset: To face selection is invalid.</source>
+ <source>To face selection is invalid.</source>
<translation>To face selection is invalid.</translation>
</message>
+ </context>
+ <context>
+ <name>ExtrusionCut:GeomValidators_ZeroOffset</name>
<message>
- <source>GeomValidators_ZeroOffset: From face selection is invalid.</source>
+ <source>From face selection is invalid.</source>
<translation>From face selection is invalid.</translation>
</message>
+ </context>
+ <context>
+ <name>ExtrusionCut:GeomValidators_ZeroOffset</name>
<message>
- <source>GeomValidators_ZeroOffset: To face selection is invalid.</source>
+ <source>To face selection is invalid.</source>
<translation>To face selection is invalid.</translation>
</message>
+ </context>
+ <context>
+ <name>ExtrusionCut:GeomValidators_ZeroOffset</name>
<message>
- <source>GeomValidators_ZeroOffset: FromSize = -ToSize and bounding planes are coincident.</source>
+ <source>FromSize = -ToSize and bounding planes are coincident.</source>
<translation>FromSize = -ToSize and bounding planes are coincident.</translation>
</message>
</context>
-
<context>
- <name>Revolution</name>
+ <name>Revolution:Model_FeatureValidator</name>
<message>
- <source>GeomValidators_ZeroOffset: FromSize = -ToSize and bounding planes are coincident.</source>
- <translation>FromAngle = -ToAngle and bounding planes are coincident.</translation>
- </message>
- <message>
- <source>Model_FeatureValidator: Attribute "axis_object" is not initialized.</source>
+ <source>Attribute "axis_object" is not initialized.</source>
<translation>Revolution axis is not selected.</translation>
</message>
+ </context>
+ <context>
+ <name>Revolution:axis_object:GeomValidators_ShapeType</name>
<message>
- <source>axis_object - GeomValidators_ShapeType: The object is empty</source>
+ <source>The object is empty</source>
<translation>Revolution axis is not selected.</translation>
</message>
+ </context>
+ <context>
+ <name>Revolution:sketch:FeaturesPlugin_ValidatorCompositeLauncher</name>
<message>
- <source>sketch - FeaturesPlugin_ValidatorCompositeLauncher: The object is empty</source>
+ <source>The object is empty</source>
<translation>Object is not selected.</translation>
</message>
-
+ </context>
+ <context>
+ <name>Revolution:GeomValidators_ZeroOffset</name>
<message>
- <source>GeomValidators_ZeroOffset: Wrong number of validator arguments in xml(expected 9).</source>
+ <source>Wrong number of validator arguments in xml(expected 9).</source>
<translation>Wrong number of validator "GeomValidators_ZeroOffset" arguments in xml(expected 9).</translation>
</message>
+ </context>
+ <context>
+ <name>Revolution:GeomValidators_ZeroOffset</name>
<message>
- <source>GeomValidators_ZeroOffset: ToSize = -FromSize.</source>
+ <source>ToSize = -FromSize.</source>
<translation>ToAngle = -FromAngle.</translation>
</message>
+ </context>
+ <context>
+ <name>Revolution:GeomValidators_ZeroOffset</name>
<message>
- <source>GeomValidators_ZeroOffset: From face selection is invalid.</source>
+ <source>From face selection is invalid.</source>
<translation>From face selection is invalid.</translation>
</message>
+ </context>
+ <context>
+ <name>Revolution:Model_FeatureValidator</name>
<message>
- <source>GeomValidators_ZeroOffset: To face selection is invalid.</source>
- <translation>To face selection is invalid.</translation>
- </message>
-
- <message>
- <source>Model_FeatureValidator: Attribute "sketch" is not initialized.</source>
+ <source>Attribute "sketch" is not initialized.</source>
<translation>Base object for revolution is not selected.</translation>
</message>
+ </context>
+ <context>
+ <name>Revolution:Model_FeatureValidator</name>
<message>
- <source>Model_FeatureValidator: Attribute "base" is not initialized.</source>
+ <source>Attribute "base" is not initialized.</source>
<translation>Base object for revolution is not selected.</translation>
</message>
+ </context>
+ <context>
+ <name>Revolution:Model_FeatureValidator</name>
<message>
- <source>Model_FeatureValidator: Attribute "axis_object" is not initialized.</source>
+ <source>Attribute "axis_object" is not initialized.</source>
<translation>Axis object for revolution is not selected.</translation>
</message>
+ </context>
+ <context>
+ <name>Revolution:Model_FeatureValidator</name>
<message>
- <source>Model_FeatureValidator: Attribute "to_angle" is not initialized.</source>
+ <source>Attribute "to_angle" is not initialized.</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>Revolution:Model_FeatureValidator</name>
<message>
- <source>Model_FeatureValidator: Attribute "from_angle" is not initialized.</source>
+ <source>Attribute "from_angle" is not initialized.</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>Revolution:Model_FeatureValidator</name>
<message>
- <source>Model_FeatureValidator: Attribute "from_object" is not initialized.</source>
+ <source>Attribute "from_object" is not initialized.</source>
<translation>From object for revolution is not selected.</translation>
</message>
+ </context>
+ <context>
+ <name>Revolution:Model_FeatureValidator</name>
<message>
- <source>Model_FeatureValidator: Attribute "from_offset" is not initialized.</source>
+ <source>Attribute "from_offset" is not initialized.</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>Revolution:Model_FeatureValidator</name>
<message>
- <source>Model_FeatureValidator: Attribute "to_object" is not initialized.</source>
+ <source>Attribute "to_object" is not initialized.</source>
<translation>To object for revolution is not selected.</translation>
</message>
+ </context>
+ <context>
+ <name>Revolution:Model_FeatureValidator</name>
<message>
- <source>Model_FeatureValidator: Attribute "to_offset" is not initialized.</source>
+ <source>Attribute "to_offset" is not initialized.</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>Revolution:sketch:FeaturesPlugin_ValidatorCompositeLauncher</name>
<message>
- <source>sketch - FeaturesPlugin_ValidatorCompositeLauncher: Error: The attribute with the %1 type is not processed</source>
+ <source>Error: The attribute with the %1 type is not processed</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>Revolution:sketch:FeaturesPlugin_ValidatorCompositeLauncher</name>
<message>
- <source>sketch - FeaturesPlugin_ValidatorCompositeLauncher: Error: Wrong parameters in XML definition for %1 type</source>
+ <source>Error: Wrong parameters in XML definition for %1 type</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>Revolution:sketch:FeaturesPlugin_ValidatorCompositeLauncher</name>
<message>
- <source>sketch - FeaturesPlugin_ValidatorCompositeLauncher: Wrong parameters in XML definition for %1 type</source>
+ <source>Wrong parameters in XML definition for %1 type</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>Revolution:base:FeaturesPlugin_ValidatorBaseForGeneration</name>
<message>
- <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Validator parameters is empty.</source>
+ <source>Error: Validator parameters is empty.</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>Revolution:base:FeaturesPlugin_ValidatorBaseForGeneration</name>
<message>
- <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Attribute contains unacceptable shape.</source>
+ <source>Error: Attribute contains unacceptable shape.</source>
<translation>Shape with unacceptable type selected.</translation>
</message>
+ </context>
+ <context>
+ <name>Revolution:base:FeaturesPlugin_ValidatorBaseForGeneration</name>
<message>
- <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Empty context.</source>
+ <source>Error: Empty context.</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>Revolution:base:FeaturesPlugin_ValidatorBaseForGeneration</name>
<message>
- <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Compound should contain only faces and edges.</source>
+ <source>Error: Compound should contain only faces and edges.</source>
<translation>Compound should contain only faces and edges.</translation>
</message>
+ </context>
+ <context>
+ <name>Revolution:base:FeaturesPlugin_ValidatorBaseForGeneration</name>
<message>
- <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Object from this sketch is already selected. Sketch is not allowed for selection.</source>
+ <source>Error: Object from this sketch is already selected. Sketch is not allowed for selection.</source>
<translation>Object from this sketch is already selected. Sketch is not allowed for selection.</translation>
</message>
+ </context>
+ <context>
+ <name>Revolution:base:FeaturesPlugin_ValidatorBaseForGeneration</name>
<message>
- <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Whole sketch with this object is already selected. Don't allow to select this object.</source>
+ <source>Error: Whole sketch with this object is already selected. Don't allow to select this object.</source>
<translation>Whole sketch with this object is already selected. Don't allow to select this object.</translation>
</message>
+ </context>
+ <context>
+ <name>Revolution:base:FeaturesPlugin_ValidatorBaseForGeneration</name>
<message>
- <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Wire with wrong orientation selected.</source>
+ <source>Error: Wire with wrong orientation selected.</source>
<translation>Wire with wrong orientation selected.</translation>
</message>
+ </context>
+ <context>
+ <name>Revolution:base:FeaturesPlugin_ValidatorBaseForGeneration</name>
<message>
- <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Objects with such wire already selected. Don't allow to select this object.</source>
+ <source>Error: Objects with such wire already selected. Don't allow to select this object.</source>
<translation>Objects with such wire already selected. Don't allow to select this object.</translation>
</message>
+ </context>
+ <context>
+ <name>Revolution:base:FeaturesPlugin_ValidatorBaseForGeneration</name>
<message>
- <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Empty attribute.</source>
+ <source>Error: Empty attribute.</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>Revolution:base:FeaturesPlugin_ValidatorBaseForGeneration</name>
<message>
- <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Attribute have empty context.</source>
+ <source>Error: Attribute have empty context.</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>Revolution:base:FeaturesPlugin_ValidatorBaseForGeneration</name>
<message>
- <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Empty shape selected</source>
+ <source>Error: Empty shape selected</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>Revolution:base:FeaturesPlugin_ValidatorBaseForGeneration</name>
<message>
- <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Infinite constructions is not allowed as base.</source>
+ <source>Error: Infinite constructions is not allowed as base.</source>
<translation>Infinite constructions is not allowed as base.</translation>
</message>
+ </context>
+ <context>
+ <name>Revolution:base:FeaturesPlugin_ValidatorBaseForGeneration</name>
<message>
- <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Selected shape is in the local selection. Only global selection is allowed.</source>
+ <source>Error: Selected shape is in the local selection. Only global selection is allowed.</source>
<translation>Selected shape is in the local selection. Only global selection is allowed.</translation>
</message>
+ </context>
+ <context>
+ <name>Revolution:base:FeaturesPlugin_ValidatorBaseForGeneration</name>
<message>
- <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Selected shape has unacceptable type. Acceptable types are: faces or wires on sketch, whole sketch(if it has at least one face), and whole objects with shape types: %1</source>
+ <source>Error: Selected shape has unacceptable type. Acceptable types are: faces or wires on sketch, whole sketch(if it has at least one face), and whole objects with shape types: %1</source>
<translation>Selected shape has unacceptable type. Acceptable types are: faces or wires on sketch, whole sketch(if it has at least one face), and whole objects with shape types: %1</translation>
</message>
+ </context>
+ <context>
+ <name>Revolution:base:FeaturesPlugin_ValidatorBaseForGeneration</name>
<message>
- <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Attribute \"%1\" does not supported by this validator.</source>
+ <source>Error: Attribute \"%1\" does not supported by this validator.</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>Revolution:axis_object:GeomValidators_ShapeType</name>
<message>
- <source>axis_object - GeomValidators_ShapeType: It does not contain element with acceptable shape type. The type should be one of the next: %1</source>
+ <source>It does not contain element with acceptable shape type. The type should be one of the next: %1</source>
<translation>It does not contain element with acceptable shape type. The type should be one of the next: %1</translation>
</message>
+ </context>
+ <context>
+ <name>Revolution:axis_object:GeomValidators_ShapeType</name>
<message>
- <source>axis_object - GeomValidators_ShapeType: It has reference to an empty attribute</source>
+ <source>It has reference to an empty attribute</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>Revolution:axis_object:GeomValidators_ShapeType</name>
<message>
- <source>axis_object - GeomValidators_ShapeType: Shape type is \"%1\", it should be \"%2\"</source>
+ <source>Shape type is \"%1\", it should be \"%2\"</source>
<translation>Shape type is "%1", it should be "%2"</translation>
</message>
+ </context>
+ <context>
+ <name>Revolution:axis_object:GeomValidators_ShapeType</name>
<message>
- <source>axis_object - GeomValidators_ShapeType: The attribute with the %1 type is not processed</source>
+ <source>The attribute with the %1 type is not processed</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>Revolution:axis_object:GeomValidators_ShapeType</name>
<message>
- <source>axis_object - GeomValidators_ShapeType: The object is empty</source>
+ <source>The object is empty</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>Revolution:axis_object:GeomValidators_ShapeType</name>
<message>
- <source>axis_object - GeomValidators_ShapeType: The result is empty</source>
+ <source>The result is empty</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>Revolution:axis_object:GeomValidators_ShapeType</name>
<message>
- <source>axis_object - GeomValidators_ShapeType: The shape is empty</source>
+ <source>The shape is empty</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>Revolution:from_object:GeomValidators_Face</name>
<message>
- <source>from_object - GeomValidators_Face: The attribute with the %1 type is not processed</source>
+ <source>The attribute with the %1 type is not processed</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>Revolution:from_object:GeomValidators_Face</name>
<message>
- <source>from_object - GeomValidators_Face: The shape is not a face.</source>
+ <source>The shape is not a face.</source>
<translation>"From" should be a planar face.</translation>
</message>
+ </context>
+ <context>
+ <name>Revolution:from_object:GeomValidators_Face</name>
<message>
- <source>from_object - GeomValidators_Face: The shape is not a face.</source>
+ <source>The shape is not a face.</source>
<translation>"From" should be a planar face.</translation>
</message>
+ </context>
+ <context>
+ <name>Revolution:from_object:GeomValidators_Face</name>
<message>
- <source>from_object - GeomValidators_Face: The shape is not a plane.</source>
+ <source>The shape is not a plane.</source>
<translation>"From" should be a planar face.</translation>
</message>
+ </context>
+ <context>
+ <name>Revolution:from_object:GeomValidators_Face</name>
<message>
- <source>from_object - GeomValidators_Face: The shape is not a cylinder.</source>
+ <source>The shape is not a cylinder.</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>Revolution:from_object:GeomValidators_Face</name>
<message>
- <source>from_object - GeomValidators_Face: The shape is not an available face.</source>
+ <source>The shape is not an available face.</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>Revolution:to_object:GeomValidators_Face</name>
<message>
- <source>to_object - GeomValidators_Face: The attribute with the %1 type is not processed</source>
+ <source>The attribute with the %1 type is not processed</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>Revolution:to_object:GeomValidators_Face</name>
+ <message>
+ <source>The shape is not a face.</source>
+ <translation>"To" should be a planar face.</translation>
+ </message>
+ </context>
+ <context>
+ <name>Revolution:to_object:GeomValidators_Face</name>
<message>
- <source>to_object - GeomValidators_Face: The shape is not a face.</source>
+ <source>The shape is not a face.</source>
<translation>"To" should be a planar face.</translation>
</message>
+ </context>
+ <context>
+ <name>Revolution:to_object:GeomValidators_Face</name>
<message>
- <source>to_object - GeomValidators_Face: The shape is not a face.</source>
+ <source>The shape is not a face.</source>
<translation>"To" should be a planar face.</translation>
</message>
+ </context>
+ <context>
+ <name>Revolution:to_object:GeomValidators_Face</name>
<message>
- <source>to_object - GeomValidators_Face: The shape is not a plane.</source>
+ <source>The shape is not a plane.</source>
<translation>"To" should be a planar face.</translation>
</message>
+ </context>
+ <context>
+ <name>Revolution:to_object:GeomValidators_Face</name>
<message>
- <source>to_object - GeomValidators_Face: The shape is not a cylinder.</source>
+ <source>The shape is not a cylinder.</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>Revolution:to_object:GeomValidators_Face</name>
<message>
- <source>to_object - GeomValidators_Face: The shape is not an available face.</source>
+ <source>The shape is not an available face.</source>
<translation></translation>
</message>
</context>
-
<context>
- <name>RevolutionCut</name>
+ <name>RevolutionCut:GeomValidators_ZeroOffset</name>
<message>
- <source>GeomValidators_ZeroOffset: FromSize = -ToSize and bounding planes are coincident.</source>
+ <source>FromSize = -ToSize and bounding planes are coincident.</source>
<translation>FromAngle = -ToAngle and bounding planes are coincident.</translation>
</message>
+ </context>
+ <context>
+ <name>RevolutionCut:Model_FeatureValidator</name>
<message>
- <source>Model_FeatureValidator: Attribute "axis_object" is not initialized.</source>
+ <source>Attribute "axis_object" is not initialized.</source>
<translation>Revolution axis is not selected.</translation>
</message>
+ </context>
+ <context>
+ <name>RevolutionCut:axis_object:GeomValidators_ShapeType</name>
<message>
- <source>axis_object - GeomValidators_ShapeType: The object is empty</source>
+ <source>The object is empty</source>
<translation>Revolution axis is not selected.</translation>
</message>
+ </context>
+ <context>
+ <name>RevolutionCut:main_objects:GeomValidators_ShapeType</name>
<message>
- <source>main_objects - GeomValidators_ShapeType: It does not contain element with acceptable shape type. The type should be one of the next: </source>
+ <source>It does not contain element with acceptable shape type. The type should be one of the next: </source>
<translation>Selected objects contain element with unacceptable shape type.</translation>
</message>
+ </context>
+ <context>
+ <name>RevolutionCut:sketch:FeaturesPlugin_ValidatorCompositeLauncher</name>
<message>
- <source>sketch - FeaturesPlugin_ValidatorCompositeLauncher: The object is empty</source>
+ <source>The object is empty</source>
<translation>Object is not selected.</translation>
</message>
+ </context>
+ <context>
+ <name>RevolutionCut:sketch:FeaturesPlugin_ValidatorCompositeLauncher</name>
<message>
- <source>sketch - FeaturesPlugin_ValidatorCompositeLauncher: The result is empty</source>
+ <source>The result is empty</source>
<translation>Object is not selected.</translation>
</message>
-
+ </context>
+ <context>
+ <name>RevolutionCut:GeomValidators_ZeroOffset</name>
<message>
- <source>GeomValidators_ZeroOffset: Wrong number of validator arguments in xml(expected 9).</source>
+ <source>Wrong number of validator arguments in xml(expected 9).</source>
<translation>Wrong number of validator "GeomValidators_ZeroOffset" arguments in xml(expected 9).</translation>
</message>
+ </context>
+ <context>
+ <name>RevolutionCut:GeomValidators_ZeroOffset</name>
<message>
- <source>GeomValidators_ZeroOffset: ToSize = -FromSize.</source>
+ <source>ToSize = -FromSize.</source>
<translation>ToAngle = -FromAngle.</translation>
</message>
+ </context>
+ <context>
+ <name>RevolutionCut:GeomValidators_ZeroOffset</name>
<message>
- <source>GeomValidators_ZeroOffset: From face selection is invalid.</source>
+ <source>From face selection is invalid.</source>
<translation>From face selection is invalid.</translation>
</message>
+ </context>
+ <context>
+ <name>RevolutionCut:GeomValidators_ZeroOffset</name>
<message>
- <source>GeomValidators_ZeroOffset: To face selection is invalid.</source>
+ <source>To face selection is invalid.</source>
<translation>To face selection is invalid.</translation>
</message>
-
+ </context>
+ <context>
+ <name>RevolutionCut:Model_FeatureValidator</name>
<message>
- <source>Model_FeatureValidator: Attribute "sketch" is not initialized.</source>
+ <source>Attribute "sketch" is not initialized.</source>
<translation>Base object for revolution is not selected.</translation>
</message>
+ </context>
+ <context>
+ <name>RevolutionCut:Model_FeatureValidator</name>
<message>
- <source>Model_FeatureValidator: Attribute "base" is not initialized.</source>
+ <source>Attribute "base" is not initialized.</source>
<translation>Base object for revolution is not selected.</translation>
</message>
+ </context>
+ <context>
+ <name>RevolutionCut:Model_FeatureValidator</name>
<message>
- <source>Model_FeatureValidator: Attribute "axis_object" is not initialized.</source>
+ <source>Attribute "axis_object" is not initialized.</source>
<translation>Axis object for revolution is not selected.</translation>
</message>
+ </context>
+ <context>
+ <name>RevolutionCut:Model_FeatureValidator</name>
<message>
- <source>Model_FeatureValidator: Attribute "to_angle" is not initialized.</source>
+ <source>Attribute "to_angle" is not initialized.</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>RevolutionCut:Model_FeatureValidator</name>
<message>
- <source>Model_FeatureValidator: Attribute "from_angle" is not initialized.</source>
+ <source>Attribute "from_angle" is not initialized.</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>RevolutionCut:Model_FeatureValidator</name>
<message>
- <source>Model_FeatureValidator: Attribute "from_object" is not initialized.</source>
+ <source>Attribute "from_object" is not initialized.</source>
<translation>From object for revolution is not selected.</translation>
</message>
+ </context>
+ <context>
+ <name>RevolutionCut:Model_FeatureValidator</name>
<message>
- <source>Model_FeatureValidator: Attribute "from_offset" is not initialized.</source>
+ <source>Attribute "from_offset" is not initialized.</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>RevolutionCut:Model_FeatureValidator</name>
<message>
- <source>Model_FeatureValidator: Attribute "to_object" is not initialized.</source>
+ <source>Attribute "to_object" is not initialized.</source>
<translation>To object for revolution is not selected.</translation>
</message>
+ </context>
+ <context>
+ <name>RevolutionCut:Model_FeatureValidator</name>
<message>
- <source>Model_FeatureValidator: Attribute "to_offset" is not initialized.</source>
+ <source>Attribute "to_offset" is not initialized.</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>RevolutionCut:Model_FeatureValidator</name>
<message>
- <source>Model_FeatureValidator: Attribute "main_objects" is not initialized.</source>
+ <source>Attribute "main_objects" is not initialized.</source>
<translation>Objects for cut is not selected.</translation>
</message>
+ </context>
+ <context>
+ <name>RevolutionCut:sketch:FeaturesPlugin_ValidatorCompositeLauncher</name>
<message>
- <source>sketch - FeaturesPlugin_ValidatorCompositeLauncher: Error: The attribute with the %1 type is not processed</source>
+ <source>Error: The attribute with the %1 type is not processed</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>RevolutionCut:sketch:FeaturesPlugin_ValidatorCompositeLauncher</name>
<message>
- <source>sketch - FeaturesPlugin_ValidatorCompositeLauncher: Error: Wrong parameters in XML definition for %1 type</source>
+ <source>Error: Wrong parameters in XML definition for %1 type</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>RevolutionCut:sketch:FeaturesPlugin_ValidatorCompositeLauncher</name>
<message>
- <source>sketch - FeaturesPlugin_ValidatorCompositeLauncher: Wrong parameters in XML definition for %1 type</source>
+ <source>Wrong parameters in XML definition for %1 type</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>RevolutionCut:base:FeaturesPlugin_ValidatorBaseForGeneration</name>
<message>
- <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Validator parameters is empty.</source>
+ <source>Error: Validator parameters is empty.</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>RevolutionCut:base:FeaturesPlugin_ValidatorBaseForGeneration</name>
<message>
- <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Attribute contains unacceptable shape.</source>
+ <source>Error: Attribute contains unacceptable shape.</source>
<translation>Shape with unacceptable type selected.</translation>
</message>
+ </context>
+ <context>
+ <name>RevolutionCut:base:FeaturesPlugin_ValidatorBaseForGeneration</name>
<message>
- <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Empty context.</source>
+ <source>Error: Empty context.</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>RevolutionCut:base:FeaturesPlugin_ValidatorBaseForGeneration</name>
<message>
- <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Compound should contain only faces and edges.</source>
+ <source>Error: Compound should contain only faces and edges.</source>
<translation>Compound should contain only faces and edges.</translation>
</message>
+ </context>
+ <context>
+ <name>RevolutionCut:base:FeaturesPlugin_ValidatorBaseForGeneration</name>
<message>
- <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Object from this sketch is already selected. Sketch is not allowed for selection.</source>
+ <source>Error: Object from this sketch is already selected. Sketch is not allowed for selection.</source>
<translation>Object from this sketch is already selected. Sketch is not allowed for selection.</translation>
</message>
+ </context>
+ <context>
+ <name>RevolutionCut:base:FeaturesPlugin_ValidatorBaseForGeneration</name>
<message>
- <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Whole sketch with this object is already selected. Don't allow to select this object.</source>
+ <source>Error: Whole sketch with this object is already selected. Don't allow to select this object.</source>
<translation>Whole sketch with this object is already selected. Don't allow to select this object.</translation>
</message>
+ </context>
+ <context>
+ <name>RevolutionCut:base:FeaturesPlugin_ValidatorBaseForGeneration</name>
<message>
- <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Wire with wrong orientation selected.</source>
+ <source>Error: Wire with wrong orientation selected.</source>
<translation>Wire with wrong orientation selected.</translation>
</message>
+ </context>
+ <context>
+ <name>RevolutionCut:base:FeaturesPlugin_ValidatorBaseForGeneration</name>
<message>
- <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Objects with such wire already selected. Don't allow to select this object.</source>
+ <source>Error: Objects with such wire already selected. Don't allow to select this object.</source>
<translation>Objects with such wire already selected. Don't allow to select this object.</translation>
</message>
+ </context>
+ <context>
+ <name>RevolutionCut:base:FeaturesPlugin_ValidatorBaseForGeneration</name>
<message>
- <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Empty attribute.</source>
+ <source>Error: Empty attribute.</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>RevolutionCut:base:FeaturesPlugin_ValidatorBaseForGeneration</name>
<message>
- <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Attribute have empty context.</source>
+ <source>Error: Attribute have empty context.</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>RevolutionCut:base:FeaturesPlugin_ValidatorBaseForGeneration</name>
<message>
- <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Empty shape selected</source>
+ <source>Error: Empty shape selected</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>RevolutionCut:base:FeaturesPlugin_ValidatorBaseForGeneration</name>
<message>
- <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Infinite constructions is not allowed as base.</source>
+ <source>Error: Infinite constructions is not allowed as base.</source>
<translation>Infinite constructions is not allowed as base.</translation>
</message>
+ </context>
+ <context>
+ <name>RevolutionCut:base:FeaturesPlugin_ValidatorBaseForGeneration</name>
<message>
- <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Selected shape is in the local selection. Only global selection is allowed.</source>
+ <source>Error: Selected shape is in the local selection. Only global selection is allowed.</source>
<translation>Selected shape is in the local selection. Only global selection is allowed.</translation>
</message>
+ </context>
+ <context>
+ <name>RevolutionCut:base:FeaturesPlugin_ValidatorBaseForGeneration</name>
<message>
- <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Selected shape has unacceptable type. Acceptable types are: faces or wires on sketch, whole sketch(if it has at least one face), and whole objects with shape types: %1</source>
+ <source>Error: Selected shape has unacceptable type. Acceptable types are: faces or wires on sketch, whole sketch(if it has at least one face), and whole objects with shape types: %1</source>
<translation>Selected shape has unacceptable type. Acceptable types are: faces or wires on sketch, whole sketch(if it has at least one face), and whole objects with shape types: %1</translation>
</message>
+ </context>
+ <context>
+ <name>RevolutionCut:base:FeaturesPlugin_ValidatorBaseForGeneration</name>
<message>
- <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Attribute \"%1\" does not supported by this validator.</source>
+ <source>Error: Attribute \"%1\" does not supported by this validator.</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>RevolutionCut:axis_object:GeomValidators_ShapeType</name>
<message>
- <source>axis_object - GeomValidators_ShapeType: It does not contain element with acceptable shape type. The type should be one of the next: %1</source>
+ <source>It does not contain element with acceptable shape type. The type should be one of the next: %1</source>
<translation>It does not contain element with acceptable shape type. The type should be one of the next: %1</translation>
</message>
+ </context>
+ <context>
+ <name>RevolutionCut:axis_object:GeomValidators_ShapeType</name>
<message>
- <source>axis_object - GeomValidators_ShapeType: It has reference to an empty attribute</source>
+ <source>It has reference to an empty attribute</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>RevolutionCut:axis_object:GeomValidators_ShapeType</name>
<message>
- <source>axis_object - GeomValidators_ShapeType: Shape type is \"%1\", it should be \"%2\"</source>
+ <source>Shape type is \"%1\", it should be \"%2\"</source>
<translation>Shape type is "%1", it should be "%2"</translation>
</message>
+ </context>
+ <context>
+ <name>RevolutionCut:axis_object:GeomValidators_ShapeType</name>
<message>
- <source>axis_object - GeomValidators_ShapeType: The attribute with the %1 type is not processed</source>
+ <source>The attribute with the %1 type is not processed</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>RevolutionCut:axis_object:GeomValidators_ShapeType</name>
<message>
- <source>axis_object - GeomValidators_ShapeType: The object is empty</source>
+ <source>The object is empty</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>RevolutionCut:axis_object:GeomValidators_ShapeType</name>
<message>
- <source>axis_object - GeomValidators_ShapeType: The result is empty</source>
+ <source>The result is empty</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>RevolutionCut:axis_object:GeomValidators_ShapeType</name>
<message>
- <source>axis_object - GeomValidators_ShapeType: The shape is empty</source>
+ <source>The shape is empty</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>RevolutionCut:from_object:GeomValidators_Face</name>
<message>
- <source>from_object - GeomValidators_Face: The attribute with the %1 type is not processed</source>
+ <source>The attribute with the %1 type is not processed</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>RevolutionCut:from_object:GeomValidators_Face</name>
<message>
- <source>from_object - GeomValidators_Face: The shape is not a face.</source>
+ <source>The shape is not a face.</source>
<translation>"From" should be a planar face.</translation>
</message>
+ </context>
+ <context>
+ <name>RevolutionCut:from_object:GeomValidators_Face</name>
<message>
- <source>from_object - GeomValidators_Face: The shape is not a face.</source>
+ <source>The shape is not a face.</source>
<translation>"From" should be a planar face.</translation>
</message>
+ </context>
+ <context>
+ <name>RevolutionCut:from_object:GeomValidators_Face</name>
<message>
- <source>from_object - GeomValidators_Face: The shape is not a plane.</source>
+ <source>The shape is not a plane.</source>
<translation>"From" should be a planar face.</translation>
</message>
+ </context>
+ <context>
+ <name>RevolutionCut:from_object:GeomValidators_Face</name>
<message>
- <source>from_object - GeomValidators_Face: The shape is not a cylinder.</source>
+ <source>The shape is not a cylinder.</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>RevolutionCut:from_object:GeomValidators_Face</name>
<message>
- <source>from_object - GeomValidators_Face: The shape is not an available face.</source>
+ <source>The shape is not an available face.</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>RevolutionCut:to_object:GeomValidators_Face</name>
<message>
- <source>to_object - GeomValidators_Face: The attribute with the %1 type is not processed</source>
+ <source>The attribute with the %1 type is not processed</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>RevolutionCut:to_object:GeomValidators_Face</name>
<message>
- <source>to_object - GeomValidators_Face: The shape is not a face.</source>
+ <source>The shape is not a face.</source>
<translation>"To" should be a planar face.</translation>
</message>
+ </context>
+ <context>
+ <name>RevolutionCut:to_object:GeomValidators_Face</name>
<message>
- <source>to_object - GeomValidators_Face: The shape is not a face.</source>
+ <source>The shape is not a face.</source>
<translation>"To" should be a planar face.</translation>
</message>
+ </context>
+ <context>
+ <name>RevolutionCut:to_object:GeomValidators_Face</name>
<message>
- <source>to_object - GeomValidators_Face: The shape is not a plane.</source>
+ <source>The shape is not a plane.</source>
<translation>"To" should be a planar face.</translation>
</message>
+ </context>
+ <context>
+ <name>RevolutionCut:to_object:GeomValidators_Face</name>
<message>
- <source>to_object - GeomValidators_Face: The shape is not a cylinder.</source>
+ <source>The shape is not a cylinder.</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>RevolutionCut:to_object:GeomValidators_Face</name>
<message>
- <source>to_object - GeomValidators_Face: The shape is not an available face.</source>
+ <source>The shape is not an available face.</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>RevolutionCut:main_objects:GeomValidators_ShapeType</name>
<message>
- <source>main_objects - GeomValidators_ShapeType: It does not contain element with acceptable shape type. The type should be one of the next: %1</source>
+ <source>It does not contain element with acceptable shape type. The type should be one of the next: %1</source>
<translation>It does not contain element with acceptable shape type. The type should be one of the next: %1</translation>
</message>
+ </context>
+ <context>
+ <name>RevolutionCut:main_objects:GeomValidators_ShapeType</name>
<message>
- <source>main_objects - GeomValidators_ShapeType: It has reference to an empty attribute</source>
+ <source>It has reference to an empty attribute</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>RevolutionCut:main_objects:GeomValidators_ShapeType</name>
<message>
- <source>main_objects - GeomValidators_ShapeType: Shape type is \"%1\", it should be \"%2\"</source>
+ <source>Shape type is \"%1\", it should be \"%2\"</source>
<translation>Shape type is "%1", it should be "%2"</translation>
</message>
+ </context>
+ <context>
+ <name>RevolutionCut:main_objects:GeomValidators_ShapeType</name>
<message>
- <source>main_objects - GeomValidators_ShapeType: The attribute with the %1 type is not processed</source>
+ <source>The attribute with the %1 type is not processed</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>RevolutionCut:main_objects:GeomValidators_ShapeType</name>
<message>
- <source>main_objects - GeomValidators_ShapeType: The object is empty</source>
+ <source>The object is empty</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>RevolutionCut:main_objects:GeomValidators_ShapeType</name>
<message>
- <source>main_objects - GeomValidators_ShapeType: The result is empty</source>
+ <source>The result is empty</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>RevolutionCut:main_objects:GeomValidators_ShapeType</name>
<message>
- <source>main_objects - GeomValidators_ShapeType: The shape is empty</source>
+ <source>The shape is empty</source>
<translation></translation>
</message>
</context>
-
<context>
- <name>ExtrusionFuse</name>
+ <name>ExtrusionFuse:GeomValidators_ZeroOffset</name>
<message>
- <source>GeomValidators_ZeroOffset: FromSize = -ToSize and bounding planes are coincident.</source>
+ <source>FromSize = -ToSize and bounding planes are coincident.</source>
<translation>FromSize = -ToSize and bounding planes are coincident.</translation>
</message>
+ </context>
+ <context>
+ <name>ExtrusionFuse:Model_FeatureValidator</name>
<message>
- <source>Model_FeatureValidator: Attribute "base" is not initialized.</source>
+ <source>Attribute "base" is not initialized.</source>
<translation>Base objects for extrusion are not selected.</translation>
</message>
+ </context>
+ <context>
+ <name>ExtrusionFuse:main_objects:GeomValidators_ShapeType</name>
<message>
- <source>main_objects - GeomValidators_ShapeType: It does not contain element with acceptable shape type. The type should be one of the next: </source>
+ <source>It does not contain element with acceptable shape type. The type should be one of the next: </source>
<translation>Selected objects contain element with unacceptable shape type.</translation>
</message>
+ </context>
+ <context>
+ <name>ExtrusionFuse:sketch:FeaturesPlugin_ValidatorCompositeLauncher</name>
<message>
- <source>sketch - FeaturesPlugin_ValidatorCompositeLauncher: The object is empty</source>
+ <source>The object is empty</source>
<translation>Object is not selected.</translation>
</message>
+ </context>
+ <context>
+ <name>ExtrusionFuse:sketch:FeaturesPlugin_ValidatorCompositeLauncher</name>
<message>
- <source>sketch - FeaturesPlugin_ValidatorCompositeLauncher: The result is empty</source>
+ <source>The result is empty</source>
<translation>Object is not selected.</translation>
</message>
-
+ </context>
+ <context>
+ <name>ExtrusionFuse:FeaturesPlugin_ValidatorExtrusionDir</name>
<message>
- <source>FeaturesPlugin_ValidatorExtrusionDir: Error: Validator should be used with 2 parameters for extrusion.</source>
+ <source>Error: Validator should be used with 2 parameters for extrusion.</source>
<translation>Validator "FeaturesPlugin_ValidatorExtrusionDir" should be used with 2 parameters for extrusion.</translation>
</message>
+ </context>
+ <context>
+ <name>ExtrusionFuse:FeaturesPlugin_ValidatorExtrusionDir</name>
<message>
- <source>FeaturesPlugin_ValidatorExtrusionDir: Error: Direction is parallel to one of the selected face or face on selected shell.</source>
+ <source>Error: Direction is parallel to one of the selected face or face on selected shell.</source>
<translation>Direction is parallel to one of the selected face or face on selected shell.</translation>
</message>
-
+ </context>
+ <context>
+ <name>ExtrusionFuse:Model_FeatureValidator</name>
<message>
- <source>Model_FeatureValidator: Attribute "sketch" is not initialized.</source>
+ <source>Attribute "sketch" is not initialized.</source>
<translation>Base object for extrusion is not selected.</translation>
</message>
+ </context>
+ <context>
+ <name>ExtrusionFuse:Model_FeatureValidator</name>
<message>
- <source>Model_FeatureValidator: Attribute "base" is not initialized.</source>
+ <source>Attribute "base" is not initialized.</source>
<translation>Base object for extrusion is not selected.</translation>
</message>
+ </context>
+ <context>
+ <name>ExtrusionFuse:Model_FeatureValidator</name>
<message>
- <source>Model_FeatureValidator: Attribute "direction_object" is not initialized.</source>
+ <source>Attribute "direction_object" is not initialized.</source>
<translation>Direction object for extrusion is not selected.</translation>
</message>
+ </context>
+ <context>
+ <name>ExtrusionFuse:Model_FeatureValidator</name>
<message>
- <source>Model_FeatureValidator: Attribute "to_size" is not initialized.</source>
+ <source>Attribute "to_size" is not initialized.</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>ExtrusionFuse:Model_FeatureValidator</name>
<message>
- <source>Model_FeatureValidator: Attribute "from_size" is not initialized.</source>
+ <source>Attribute "from_size" is not initialized.</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>ExtrusionFuse:Model_FeatureValidator</name>
<message>
- <source>Model_FeatureValidator: Attribute "from_object" is not initialized.</source>
+ <source>Attribute "from_object" is not initialized.</source>
<translation>From object for extrusion is not selected.</translation>
</message>
+ </context>
+ <context>
+ <name>ExtrusionFuse:Model_FeatureValidator</name>
<message>
- <source>Model_FeatureValidator: Attribute "from_offset" is not initialized.</source>
+ <source>Attribute "from_offset" is not initialized.</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>ExtrusionFuse:Model_FeatureValidator</name>
<message>
- <source>Model_FeatureValidator: Attribute "to_object" is not initialized.</source>
+ <source>Attribute "to_object" is not initialized.</source>
<translation>To object for extrusion is not selected.</translation>
</message>
+ </context>
+ <context>
+ <name>ExtrusionFuse:Model_FeatureValidator</name>
<message>
- <source>Model_FeatureValidator: Attribute "to_offset" is not initialized.</source>
+ <source>Attribute "to_offset" is not initialized.</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>ExtrusionFuse:Model_FeatureValidator</name>
<message>
- <source>Model_FeatureValidator: Attribute "main_objects" is not initialized.</source>
+ <source>Attribute "main_objects" is not initialized.</source>
<translation>Objects for fuse is not selected.</translation>
</message>
+ </context>
+ <context>
+ <name>ExtrusionFuse:sketch:FeaturesPlugin_ValidatorCompositeLauncher</name>
<message>
- <source>sketch - FeaturesPlugin_ValidatorCompositeLauncher: Error: The attribute with the %1 type is not processed</source>
+ <source>Error: The attribute with the %1 type is not processed</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>ExtrusionFuse:sketch:FeaturesPlugin_ValidatorCompositeLauncher</name>
<message>
- <source>sketch - FeaturesPlugin_ValidatorCompositeLauncher: Error: Wrong parameters in XML definition for %1 type</source>
+ <source>Error: Wrong parameters in XML definition for %1 type</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>ExtrusionFuse:sketch:FeaturesPlugin_ValidatorCompositeLauncher</name>
<message>
- <source>sketch - FeaturesPlugin_ValidatorCompositeLauncher: Wrong parameters in XML definition for %1 type</source>
+ <source>Wrong parameters in XML definition for %1 type</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>ExtrusionFuse:base:FeaturesPlugin_ValidatorBaseForGeneration</name>
<message>
- <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Validator parameters is empty.</source>
+ <source>Error: Validator parameters is empty.</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>ExtrusionFuse:base:FeaturesPlugin_ValidatorBaseForGeneration</name>
<message>
- <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Attribute contains unacceptable shape.</source>
+ <source>Error: Attribute contains unacceptable shape.</source>
<translation>Shape with unacceptable type selected.</translation>
</message>
+ </context>
+ <context>
+ <name>ExtrusionFuse:base:FeaturesPlugin_ValidatorBaseForGeneration</name>
<message>
- <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Empty context.</source>
+ <source>Error: Empty context.</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>ExtrusionFuse:base:FeaturesPlugin_ValidatorBaseForGeneration</name>
<message>
- <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Compound should contain only faces and edges.</source>
+ <source>Error: Compound should contain only faces and edges.</source>
<translation>Compound should contain only faces and edges.</translation>
</message>
+ </context>
+ <context>
+ <name>ExtrusionFuse:base:FeaturesPlugin_ValidatorBaseForGeneration</name>
<message>
- <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Object from this sketch is already selected. Sketch is not allowed for selection.</source>
+ <source>Error: Object from this sketch is already selected. Sketch is not allowed for selection.</source>
<translation>Object from this sketch is already selected. Sketch is not allowed for selection.</translation>
</message>
+ </context>
+ <context>
+ <name>ExtrusionFuse:base:FeaturesPlugin_ValidatorBaseForGeneration</name>
<message>
- <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Whole sketch with this object is already selected. Don't allow to select this object.</source>
+ <source>Error: Whole sketch with this object is already selected. Don't allow to select this object.</source>
<translation>Whole sketch with this object is already selected. Don't allow to select this object.</translation>
</message>
+ </context>
+ <context>
+ <name>ExtrusionFuse:base:FeaturesPlugin_ValidatorBaseForGeneration</name>
<message>
- <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Wire with wrong orientation selected.</source>
+ <source>Error: Wire with wrong orientation selected.</source>
<translation>Wire with wrong orientation selected.</translation>
</message>
+ </context>
+ <context>
+ <name>ExtrusionFuse:base:FeaturesPlugin_ValidatorBaseForGeneration</name>
<message>
- <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Objects with such wire already selected. Don't allow to select this object.</source>
+ <source>Error: Objects with such wire already selected. Don't allow to select this object.</source>
<translation>Objects with such wire already selected. Don't allow to select this object.</translation>
</message>
+ </context>
+ <context>
+ <name>ExtrusionFuse:base:FeaturesPlugin_ValidatorBaseForGeneration</name>
<message>
- <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Empty attribute.</source>
+ <source>Error: Empty attribute.</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>ExtrusionFuse:base:FeaturesPlugin_ValidatorBaseForGeneration</name>
<message>
- <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Attribute have empty context.</source>
+ <source>Error: Attribute have empty context.</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>ExtrusionFuse:base:FeaturesPlugin_ValidatorBaseForGeneration</name>
<message>
- <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Empty shape selected</source>
+ <source>Error: Empty shape selected</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>ExtrusionFuse:base:FeaturesPlugin_ValidatorBaseForGeneration</name>
<message>
- <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Infinite constructions is not allowed as base.</source>
+ <source>Error: Infinite constructions is not allowed as base.</source>
<translation>Infinite constructions is not allowed as base.</translation>
</message>
+ </context>
+ <context>
+ <name>ExtrusionFuse:base:FeaturesPlugin_ValidatorBaseForGeneration</name>
<message>
- <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Selected shape is in the local selection. Only global selection is allowed.</source>
+ <source>Error: Selected shape is in the local selection. Only global selection is allowed.</source>
<translation>Selected shape is in the local selection. Only global selection is allowed.</translation>
</message>
+ </context>
+ <context>
+ <name>ExtrusionFuse:base:FeaturesPlugin_ValidatorBaseForGeneration</name>
<message>
- <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Selected shape has unacceptable type. Acceptable types are: faces or wires on sketch, whole sketch(if it has at least one face), and whole objects with shape types: %1</source>
+ <source>Error: Selected shape has unacceptable type. Acceptable types are: faces or wires on sketch, whole sketch(if it has at least one face), and whole objects with shape types: %1</source>
<translation>Selected shape has unacceptable type. Acceptable types are: faces or wires on sketch, whole sketch(if it has at least one face), and whole objects with shape types: %1</translation>
</message>
+ </context>
+ <context>
+ <name>ExtrusionFuse:base:FeaturesPlugin_ValidatorBaseForGeneration</name>
<message>
- <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Attribute \"%1\" does not supported by this validator.</source>
+ <source>Error: Attribute \"%1\" does not supported by this validator.</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>ExtrusionFuse:direction_object:GeomValidators_ShapeType</name>
<message>
- <source>direction_object - GeomValidators_ShapeType: It does not contain element with acceptable shape type. The type should be one of the next: %1</source>
+ <source>It does not contain element with acceptable shape type. The type should be one of the next: %1</source>
<translation>It does not contain element with acceptable shape type. The type should be one of the next: %1</translation>
</message>
+ </context>
+ <context>
+ <name>ExtrusionFuse:direction_object:GeomValidators_ShapeType</name>
<message>
- <source>direction_object - GeomValidators_ShapeType: It has reference to an empty attribute</source>
+ <source>It has reference to an empty attribute</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>ExtrusionFuse:direction_object:GeomValidators_ShapeType</name>
<message>
- <source>direction_object - GeomValidators_ShapeType: Shape type is \"%1\", it should be \"%2\"</source>
+ <source>Shape type is \"%1\", it should be \"%2\"</source>
<translation>Shape type is "%1", it should be "%2"</translation>
</message>
+ </context>
+ <context>
+ <name>ExtrusionFuse:direction_object:GeomValidators_ShapeType</name>
<message>
- <source>direction_object - GeomValidators_ShapeType: The attribute with the %1 type is not processed</source>
+ <source>The attribute with the %1 type is not processed</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>ExtrusionFuse:direction_object:GeomValidators_ShapeType</name>
<message>
- <source>direction_object - GeomValidators_ShapeType: The object is empty</source>
+ <source>The object is empty</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>ExtrusionFuse:direction_object:GeomValidators_ShapeType</name>
<message>
- <source>direction_object - GeomValidators_ShapeType: The result is empty</source>
+ <source>The result is empty</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>ExtrusionFuse:direction_object:GeomValidators_ShapeType</name>
<message>
- <source>direction_object - GeomValidators_ShapeType: The shape is empty</source>
+ <source>The shape is empty</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>ExtrusionFuse:from_object:GeomValidators_Face</name>
<message>
- <source>from_object - GeomValidators_Face: The attribute with the %1 type is not processed</source>
+ <source>The attribute with the %1 type is not processed</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>ExtrusionFuse:from_object:GeomValidators_Face</name>
<message>
- <source>from_object - GeomValidators_Face: The shape is not a face.</source>
+ <source>The shape is not a face.</source>
<translation>"From" should be a planar face.</translation>
</message>
+ </context>
+ <context>
+ <name>ExtrusionFuse:from_object:GeomValidators_Face</name>
<message>
- <source>from_object - GeomValidators_Face: The shape is not a face.</source>
+ <source>The shape is not a face.</source>
<translation>"From" should be a planar face.</translation>
</message>
+ </context>
+ <context>
+ <name>ExtrusionFuse:from_object:GeomValidators_Face</name>
<message>
- <source>from_object - GeomValidators_Face: The shape is not a plane.</source>
+ <source>The shape is not a plane.</source>
<translation>"From" should be a planar face.</translation>
</message>
+ </context>
+ <context>
+ <name>ExtrusionFuse:from_object:GeomValidators_Face</name>
<message>
- <source>from_object - GeomValidators_Face: The shape is not a cylinder.</source>
+ <source>The shape is not a cylinder.</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>ExtrusionFuse:from_object:GeomValidators_Face</name>
<message>
- <source>from_object - GeomValidators_Face: The shape is not an available face.</source>
+ <source>The shape is not an available face.</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>ExtrusionFuse:to_object:GeomValidators_Face</name>
<message>
- <source>to_object - GeomValidators_Face: The attribute with the %1 type is not processed</source>
+ <source>The attribute with the %1 type is not processed</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>ExtrusionFuse:to_object:GeomValidators_Face</name>
<message>
- <source>to_object - GeomValidators_Face: The shape is not a face.</source>
+ <source>The shape is not a face.</source>
<translation>"To" should be a planar face.</translation>
</message>
+ </context>
+ <context>
+ <name>ExtrusionFuse:to_object:GeomValidators_Face</name>
<message>
- <source>to_object - GeomValidators_Face: The shape is not a face.</source>
+ <source>The shape is not a face.</source>
<translation>"To" should be a planar face.</translation>
</message>
+ </context>
+ <context>
+ <name>ExtrusionFuse:to_object:GeomValidators_Face</name>
<message>
- <source>to_object - GeomValidators_Face: The shape is not a plane.</source>
+ <source>The shape is not a plane.</source>
<translation>"To" should be a planar face.</translation>
</message>
+ </context>
+ <context>
+ <name>ExtrusionFuse:to_object:GeomValidators_Face</name>
<message>
- <source>to_object - GeomValidators_Face: The shape is not a cylinder.</source>
+ <source>The shape is not a cylinder.</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>ExtrusionFuse:to_object:GeomValidators_Face</name>
<message>
- <source>to_object - GeomValidators_Face: The shape is not an available face.</source>
+ <source>The shape is not an available face.</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>ExtrusionFuse:main_objects:GeomValidators_ShapeType</name>
<message>
- <source>main_objects - GeomValidators_ShapeType: It does not contain element with acceptable shape type. The type should be one of the next: %1</source>
+ <source>It does not contain element with acceptable shape type. The type should be one of the next: %1</source>
<translation>It does not contain element with acceptable shape type. The type should be one of the next: %1</translation>
</message>
+ </context>
+ <context>
+ <name>ExtrusionFuse:main_objects:GeomValidators_ShapeType</name>
<message>
- <source>main_objects - GeomValidators_ShapeType: It has reference to an empty attribute</source>
+ <source>It has reference to an empty attribute</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>ExtrusionFuse:main_objects:GeomValidators_ShapeType</name>
<message>
- <source>main_objects - GeomValidators_ShapeType: Shape type is \"%1\", it should be \"%2\"</source>
+ <source>Shape type is \"%1\", it should be \"%2\"</source>
<translation>Shape type is "%1", it should be "%2"</translation>
</message>
+ </context>
+ <context>
+ <name>ExtrusionFuse:main_objects:GeomValidators_ShapeType</name>
<message>
- <source>main_objects - GeomValidators_ShapeType: The attribute with the %1 type is not processed</source>
+ <source>The attribute with the %1 type is not processed</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>ExtrusionFuse:main_objects:GeomValidators_ShapeType</name>
<message>
- <source>main_objects - GeomValidators_ShapeType: The object is empty</source>
+ <source>The object is empty</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>ExtrusionFuse:main_objects:GeomValidators_ShapeType</name>
<message>
- <source>main_objects - GeomValidators_ShapeType: The result is empty</source>
+ <source>The result is empty</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>ExtrusionFuse:main_objects:GeomValidators_ShapeType</name>
<message>
- <source>main_objects - GeomValidators_ShapeType: The shape is empty</source>
+ <source>The shape is empty</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>ExtrusionFuse:GeomValidators_ZeroOffset</name>
<message>
- <source>GeomValidators_ZeroOffset: Wrong number of validator arguments in xml(expected 9).</source>
+ <source>Wrong number of validator arguments in xml(expected 9).</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>ExtrusionFuse:GeomValidators_ZeroOffset</name>
<message>
- <source>GeomValidators_ZeroOffset: ToSize = -FromSize.</source>
+ <source>ToSize = -FromSize.</source>
<translation>ToSize = -FromSize.</translation>
</message>
+ </context>
+ <context>
+ <name>ExtrusionFuse:GeomValidators_ZeroOffset</name>
<message>
- <source>GeomValidators_ZeroOffset: From face selection is invalid.</source>
+ <source>From face selection is invalid.</source>
<translation>From face selection is invalid.</translation>
</message>
+ </context>
+ <context>
+ <name>ExtrusionFuse:GeomValidators_ZeroOffset</name>
<message>
- <source>GeomValidators_ZeroOffset: To face selection is invalid.</source>
+ <source>To face selection is invalid.</source>
<translation>To face selection is invalid.</translation>
</message>
+ </context>
+ <context>
+ <name>ExtrusionFuse:GeomValidators_ZeroOffset</name>
<message>
- <source>GeomValidators_ZeroOffset: From face selection is invalid.</source>
+ <source>From face selection is invalid.</source>
<translation>From face selection is invalid.</translation>
</message>
+ </context>
+ <context>
+ <name>ExtrusionFuse:GeomValidators_ZeroOffset</name>
<message>
- <source>GeomValidators_ZeroOffset: To face selection is invalid.</source>
+ <source>To face selection is invalid.</source>
<translation>To face selection is invalid.</translation>
</message>
+ </context>
+ <context>
+ <name>ExtrusionFuse:GeomValidators_ZeroOffset</name>
<message>
- <source>GeomValidators_ZeroOffset: FromSize = -ToSize and bounding planes are coincident.</source>
+ <source>FromSize = -ToSize and bounding planes are coincident.</source>
<translation>FromSize = -ToSize and bounding planes are coincident.</translation>
</message>
</context>
-
<context>
- <name>RevolutionFuse</name>
+ <name>RevolutionFuse:GeomValidators_ZeroOffset</name>
<message>
- <source>GeomValidators_ZeroOffset: FromSize = -ToSize and bounding planes are coincident.</source>
+ <source>FromSize = -ToSize and bounding planes are coincident.</source>
<translation>FromAngle = -ToAngle and bounding planes are coincident.</translation>
</message>
+ </context>
+ <context>
+ <name>RevolutionFuse:Model_FeatureValidator</name>
<message>
- <source>Model_FeatureValidator: Attribute "axis_object" is not initialized.</source>
+ <source>Attribute "axis_object" is not initialized.</source>
<translation>Revolution axis is not selected.</translation>
</message>
+ </context>
+ <context>
+ <name>RevolutionFuse:axis_object:GeomValidators_ShapeType</name>
<message>
- <source>axis_object - GeomValidators_ShapeType: The object is empty</source>
+ <source>The object is empty</source>
<translation>Revolution axis is not selected.</translation>
</message>
+ </context>
+ <context>
+ <name>RevolutionFuse:main_objects:GeomValidators_ShapeType</name>
<message>
- <source>main_objects - GeomValidators_ShapeType: It does not contain element with acceptable shape type. The type should be one of the next: </source>
+ <source>It does not contain element with acceptable shape type. The type should be one of the next: </source>
<translation>Selected objects contain element with unacceptable shape type.</translation>
</message>
+ </context>
+ <context>
+ <name>RevolutionFuse:sketch:FeaturesPlugin_ValidatorCompositeLauncher</name>
<message>
- <source>sketch - FeaturesPlugin_ValidatorCompositeLauncher: The object is empty</source>
+ <source>The object is empty</source>
<translation>Object is not selected.</translation>
</message>
+ </context>
+ <context>
+ <name>RevolutionFuse:sketch:FeaturesPlugin_ValidatorCompositeLauncher</name>
<message>
- <source>sketch - FeaturesPlugin_ValidatorCompositeLauncher: The result is empty</source>
+ <source>The result is empty</source>
<translation>Object is not selected.</translation>
</message>
-
+ </context>
+ <context>
+ <name>RevolutionFuse:GeomValidators_ZeroOffset</name>
<message>
- <source>GeomValidators_ZeroOffset: Wrong number of validator arguments in xml(expected 9).</source>
+ <source>Wrong number of validator arguments in xml(expected 9).</source>
<translation>Wrong number of validator "GeomValidators_ZeroOffset" arguments in xml(expected 9).</translation>
</message>
+ </context>
+ <context>
+ <name>RevolutionFuse:GeomValidators_ZeroOffset</name>
<message>
- <source>GeomValidators_ZeroOffset: ToSize = -FromSize.</source>
+ <source>ToSize = -FromSize.</source>
<translation>ToAngle = -FromAngle.</translation>
</message>
+ </context>
+ <context>
+ <name>RevolutionFuse:GeomValidators_ZeroOffset</name>
<message>
- <source>GeomValidators_ZeroOffset: From face selection is invalid.</source>
+ <source>From face selection is invalid.</source>
<translation>From face selection is invalid.</translation>
</message>
+ </context>
+ <context>
+ <name>RevolutionFuse:GeomValidators_ZeroOffset</name>
<message>
- <source>GeomValidators_ZeroOffset: To face selection is invalid.</source>
+ <source>To face selection is invalid.</source>
<translation>To face selection is invalid.</translation>
</message>
-
+ </context>
+ <context>
+ <name>RevolutionFuse:Model_FeatureValidator</name>
<message>
- <source>Model_FeatureValidator: Attribute "sketch" is not initialized.</source>
+ <source>Attribute "sketch" is not initialized.</source>
<translation>Base object for revolution is not selected.</translation>
</message>
+ </context>
+ <context>
+ <name>RevolutionFuse:Model_FeatureValidator</name>
<message>
- <source>Model_FeatureValidator: Attribute "base" is not initialized.</source>
+ <source>Attribute "base" is not initialized.</source>
<translation>Base object for revolution is not selected.</translation>
</message>
+ </context>
+ <context>
+ <name>RevolutionFuse:Model_FeatureValidator</name>
<message>
- <source>Model_FeatureValidator: Attribute "axis_object" is not initialized.</source>
+ <source>Attribute "axis_object" is not initialized.</source>
<translation>Axis object for revolution is not selected.</translation>
</message>
+ </context>
+ <context>
+ <name>RevolutionFuse:Model_FeatureValidator</name>
<message>
- <source>Model_FeatureValidator: Attribute "to_angle" is not initialized.</source>
+ <source>Attribute "to_angle" is not initialized.</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>RevolutionFuse:Model_FeatureValidator</name>
<message>
- <source>Model_FeatureValidator: Attribute "from_angle" is not initialized.</source>
+ <source>Attribute "from_angle" is not initialized.</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>RevolutionFuse:Model_FeatureValidator</name>
<message>
- <source>Model_FeatureValidator: Attribute "from_object" is not initialized.</source>
+ <source>Attribute "from_object" is not initialized.</source>
<translation>From object for revolution is not selected.</translation>
</message>
+ </context>
+ <context>
+ <name>RevolutionFuse:Model_FeatureValidator</name>
<message>
- <source>Model_FeatureValidator: Attribute "from_offset" is not initialized.</source>
+ <source>Attribute "from_offset" is not initialized.</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>RevolutionFuse:Model_FeatureValidator</name>
<message>
- <source>Model_FeatureValidator: Attribute "to_object" is not initialized.</source>
+ <source>Attribute "to_object" is not initialized.</source>
<translation>To object for revolution is not selected.</translation>
</message>
+ </context>
+ <context>
+ <name>RevolutionFuse:Model_FeatureValidator</name>
<message>
- <source>Model_FeatureValidator: Attribute "to_offset" is not initialized.</source>
+ <source>Attribute "to_offset" is not initialized.</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>RevolutionFuse:Model_FeatureValidator</name>
<message>
- <source>Model_FeatureValidator: Attribute "main_objects" is not initialized.</source>
+ <source>Attribute "main_objects" is not initialized.</source>
<translation>Objects for fuse is not selected.</translation>
</message>
+ </context>
+ <context>
+ <name>RevolutionFuse:sketch:FeaturesPlugin_ValidatorCompositeLauncher</name>
<message>
- <source>sketch - FeaturesPlugin_ValidatorCompositeLauncher: Error: The attribute with the %1 type is not processed</source>
+ <source>Error: The attribute with the %1 type is not processed</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>RevolutionFuse:sketch:FeaturesPlugin_ValidatorCompositeLauncher</name>
<message>
- <source>sketch - FeaturesPlugin_ValidatorCompositeLauncher: Error: Wrong parameters in XML definition for %1 type</source>
+ <source>Error: Wrong parameters in XML definition for %1 type</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>RevolutionFuse:sketch:FeaturesPlugin_ValidatorCompositeLauncher</name>
<message>
- <source>sketch - FeaturesPlugin_ValidatorCompositeLauncher: Wrong parameters in XML definition for %1 type</source>
+ <source>Wrong parameters in XML definition for %1 type</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>RevolutionFuse:base:FeaturesPlugin_ValidatorBaseForGeneration</name>
<message>
- <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Validator parameters is empty.</source>
+ <source>Error: Validator parameters is empty.</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>RevolutionFuse:base:FeaturesPlugin_ValidatorBaseForGeneration</name>
<message>
- <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Attribute contains unacceptable shape.</source>
+ <source>Error: Attribute contains unacceptable shape.</source>
<translation>Shape with unacceptable type selected.</translation>
</message>
+ </context>
+ <context>
+ <name>RevolutionFuse:base:FeaturesPlugin_ValidatorBaseForGeneration</name>
<message>
- <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Empty context.</source>
+ <source>Error: Empty context.</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>RevolutionFuse:base:FeaturesPlugin_ValidatorBaseForGeneration</name>
<message>
- <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Compound should contain only faces and edges.</source>
+ <source>Error: Compound should contain only faces and edges.</source>
<translation>Compound should contain only faces and edges.</translation>
</message>
+ </context>
+ <context>
+ <name>RevolutionFuse:base:FeaturesPlugin_ValidatorBaseForGeneration</name>
<message>
- <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Object from this sketch is already selected. Sketch is not allowed for selection.</source>
+ <source>Error: Object from this sketch is already selected. Sketch is not allowed for selection.</source>
<translation>Object from this sketch is already selected. Sketch is not allowed for selection.</translation>
</message>
+ </context>
+ <context>
+ <name>RevolutionFuse:base:FeaturesPlugin_ValidatorBaseForGeneration</name>
<message>
- <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Whole sketch with this object is already selected. Don't allow to select this object.</source>
+ <source>Error: Whole sketch with this object is already selected. Don't allow to select this object.</source>
<translation>Whole sketch with this object is already selected. Don't allow to select this object.</translation>
</message>
+ </context>
+ <context>
+ <name>RevolutionFuse:base:FeaturesPlugin_ValidatorBaseForGeneration</name>
<message>
- <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Wire with wrong orientation selected.</source>
+ <source>Error: Wire with wrong orientation selected.</source>
<translation>Wire with wrong orientation selected.</translation>
</message>
+ </context>
+ <context>
+ <name>RevolutionFuse:base:FeaturesPlugin_ValidatorBaseForGeneration</name>
<message>
- <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Objects with such wire already selected. Don't allow to select this object.</source>
+ <source>Error: Objects with such wire already selected. Don't allow to select this object.</source>
<translation>Objects with such wire already selected. Don't allow to select this object.</translation>
</message>
+ </context>
+ <context>
+ <name>RevolutionFuse:base:FeaturesPlugin_ValidatorBaseForGeneration</name>
<message>
- <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Empty attribute.</source>
+ <source>Error: Empty attribute.</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>RevolutionFuse:base:FeaturesPlugin_ValidatorBaseForGeneration</name>
<message>
- <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Attribute have empty context.</source>
+ <source>Error: Attribute have empty context.</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>RevolutionFuse:base:FeaturesPlugin_ValidatorBaseForGeneration</name>
<message>
- <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Empty shape selected</source>
+ <source>Error: Empty shape selected</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>RevolutionFuse:base:FeaturesPlugin_ValidatorBaseForGeneration</name>
<message>
- <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Infinite constructions is not allowed as base.</source>
+ <source>Error: Infinite constructions is not allowed as base.</source>
<translation>Infinite constructions is not allowed as base.</translation>
</message>
+ </context>
+ <context>
+ <name>RevolutionFuse:base:FeaturesPlugin_ValidatorBaseForGeneration</name>
<message>
- <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Selected shape is in the local selection. Only global selection is allowed.</source>
+ <source>Error: Selected shape is in the local selection. Only global selection is allowed.</source>
<translation>Selected shape is in the local selection. Only global selection is allowed.</translation>
</message>
+ </context>
+ <context>
+ <name>RevolutionFuse:base:FeaturesPlugin_ValidatorBaseForGeneration</name>
<message>
- <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Selected shape has unacceptable type. Acceptable types are: faces or wires on sketch, whole sketch(if it has at least one face), and whole objects with shape types: %1</source>
+ <source>Error: Selected shape has unacceptable type. Acceptable types are: faces or wires on sketch, whole sketch(if it has at least one face), and whole objects with shape types: %1</source>
<translation>Selected shape has unacceptable type. Acceptable types are: faces or wires on sketch, whole sketch(if it has at least one face), and whole objects with shape types: %1</translation>
</message>
+ </context>
+ <context>
+ <name>RevolutionFuse:base:FeaturesPlugin_ValidatorBaseForGeneration</name>
<message>
- <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Attribute \"%1\" does not supported by this validator.</source>
+ <source>Error: Attribute \"%1\" does not supported by this validator.</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>RevolutionFuse:axis_object:GeomValidators_ShapeType</name>
<message>
- <source>axis_object - GeomValidators_ShapeType: It does not contain element with acceptable shape type. The type should be one of the next: %1</source>
+ <source>It does not contain element with acceptable shape type. The type should be one of the next: %1</source>
<translation>It does not contain element with acceptable shape type. The type should be one of the next: %1</translation>
</message>
+ </context>
+ <context>
+ <name>RevolutionFuse:axis_object:GeomValidators_ShapeType</name>
<message>
- <source>axis_object - GeomValidators_ShapeType: It has reference to an empty attribute</source>
+ <source>It has reference to an empty attribute</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>RevolutionFuse:axis_object:GeomValidators_ShapeType</name>
<message>
- <source>axis_object - GeomValidators_ShapeType: Shape type is \"%1\", it should be \"%2\"</source>
+ <source>Shape type is \"%1\", it should be \"%2\"</source>
<translation>Shape type is "%1", it should be "%2"</translation>
</message>
+ </context>
+ <context>
+ <name>RevolutionFuse:axis_object:GeomValidators_ShapeType</name>
<message>
- <source>axis_object - GeomValidators_ShapeType: The attribute with the %1 type is not processed</source>
+ <source>The attribute with the %1 type is not processed</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>RevolutionFuse:axis_object:GeomValidators_ShapeType</name>
<message>
- <source>axis_object - GeomValidators_ShapeType: The object is empty</source>
+ <source>The object is empty</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>RevolutionFuse:axis_object:GeomValidators_ShapeType</name>
<message>
- <source>axis_object - GeomValidators_ShapeType: The result is empty</source>
+ <source>The result is empty</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>RevolutionFuse:axis_object:GeomValidators_ShapeType</name>
<message>
- <source>axis_object - GeomValidators_ShapeType: The shape is empty</source>
+ <source>The shape is empty</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>RevolutionFuse:from_object:GeomValidators_Face</name>
<message>
- <source>from_object - GeomValidators_Face: The attribute with the %1 type is not processed</source>
+ <source>The attribute with the %1 type is not processed</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>RevolutionFuse:from_object:GeomValidators_Face</name>
<message>
- <source>from_object - GeomValidators_Face: The shape is not a face.</source>
+ <source>The shape is not a face.</source>
<translation>"From" should be a planar face.</translation>
</message>
+ </context>
+ <context>
+ <name>RevolutionFuse:from_object:GeomValidators_Face</name>
<message>
- <source>from_object - GeomValidators_Face: The shape is not a face.</source>
+ <source>The shape is not a face.</source>
<translation>"From" should be a planar face.</translation>
</message>
+ </context>
+ <context>
+ <name>RevolutionFuse:from_object:GeomValidators_Face</name>
<message>
- <source>from_object - GeomValidators_Face: The shape is not a plane.</source>
+ <source>The shape is not a plane.</source>
<translation>"From" should be a planar face.</translation>
</message>
+ </context>
+ <context>
+ <name>RevolutionFuse:from_object:GeomValidators_Face</name>
<message>
- <source>from_object - GeomValidators_Face: The shape is not a cylinder.</source>
+ <source>The shape is not a cylinder.</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>RevolutionFuse:from_object:GeomValidators_Face</name>
<message>
- <source>from_object - GeomValidators_Face: The shape is not an available face.</source>
+ <source>The shape is not an available face.</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>RevolutionFuse:to_object:GeomValidators_Face</name>
<message>
- <source>to_object - GeomValidators_Face: The attribute with the %1 type is not processed</source>
+ <source>The attribute with the %1 type is not processed</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>RevolutionFuse:to_object:GeomValidators_Face</name>
<message>
- <source>to_object - GeomValidators_Face: The shape is not a face.</source>
+ <source>The shape is not a face.</source>
<translation>"To" should be a planar face.</translation>
</message>
+ </context>
+ <context>
+ <name>RevolutionFuse:to_object:GeomValidators_Face</name>
<message>
- <source>to_object - GeomValidators_Face: The shape is not a face.</source>
+ <source>The shape is not a face.</source>
<translation>"To" should be a planar face.</translation>
</message>
+ </context>
+ <context>
+ <name>RevolutionFuse:to_object:GeomValidators_Face</name>
<message>
- <source>to_object - GeomValidators_Face: The shape is not a plane.</source>
+ <source>The shape is not a plane.</source>
<translation>"To" should be a planar face.</translation>
</message>
+ </context>
+ <context>
+ <name>RevolutionFuse:to_object:GeomValidators_Face</name>
<message>
- <source>to_object - GeomValidators_Face: The shape is not a cylinder.</source>
+ <source>The shape is not a cylinder.</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>RevolutionFuse:to_object:GeomValidators_Face</name>
<message>
- <source>to_object - GeomValidators_Face: The shape is not an available face.</source>
+ <source>The shape is not an available face.</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>RevolutionFuse:main_objects:GeomValidators_ShapeType</name>
<message>
- <source>main_objects - GeomValidators_ShapeType: It does not contain element with acceptable shape type. The type should be one of the next: %1</source>
+ <source>It does not contain element with acceptable shape type. The type should be one of the next: %1</source>
<translation>It does not contain element with acceptable shape type. The type should be one of the next: %1</translation>
</message>
+ </context>
+ <context>
+ <name>RevolutionFuse:main_objects:GeomValidators_ShapeType</name>
<message>
- <source>main_objects - GeomValidators_ShapeType: It has reference to an empty attribute</source>
+ <source>It has reference to an empty attribute</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>RevolutionFuse:main_objects:GeomValidators_ShapeType</name>
<message>
- <source>main_objects - GeomValidators_ShapeType: Shape type is \"%1\", it should be \"%2\"</source>
+ <source>Shape type is \"%1\", it should be \"%2\"</source>
<translation>Shape type is "%1", it should be "%2"</translation>
</message>
+ </context>
+ <context>
+ <name>RevolutionFuse:main_objects:GeomValidators_ShapeType</name>
<message>
- <source>main_objects - GeomValidators_ShapeType: The attribute with the %1 type is not processed</source>
+ <source>The attribute with the %1 type is not processed</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>RevolutionFuse:main_objects:GeomValidators_ShapeType</name>
<message>
- <source>main_objects - GeomValidators_ShapeType: The object is empty</source>
+ <source>The object is empty</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>RevolutionFuse:main_objects:GeomValidators_ShapeType</name>
<message>
- <source>main_objects - GeomValidators_ShapeType: The result is empty</source>
+ <source>The result is empty</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>RevolutionFuse:main_objects:GeomValidators_ShapeType</name>
<message>
- <source>main_objects - GeomValidators_ShapeType: The shape is empty</source>
+ <source>The shape is empty</source>
<translation></translation>
</message>
</context>
-
<context>
<name>Boolean</name>
<message>
- <source>GeomValidators_BooleanArguments: Not enough arguments</source>
- <translation>Not enough arguments for the operation</translation>
+ <source>Boolean</source>
+ <translation>Boolean</translation>
</message>
-
<message>
- <source>GeomValidators_BooleanArguments: Wrong number of arguments (expected 3).</source>
- <translation>Wrong number of validator "GeomValidators_BooleanArguments" arguments (expected 3).</translation>
+ <source>Boolean operations with objects</source>
+ <translation>Boolean operations with objects</translation>
+ </message>
+ </context>
+ <context>
+ <name>Boolean:bool_type</name>
+ <message>
+ <source>Operation type</source>
+ <translation>Operation type</translation>
</message>
-
<message>
- <source>Model_FeatureValidator: Attribute "bool_type" is not initialized.</source>
- <translation></translation>
+ <source>Type of boolean operation</source>
+ <translation>Type of boolean operation</translation>
</message>
<message>
- <source>Model_FeatureValidator: Attribute "main_objects" is not initialized.</source>
- <translation>Objects not selected.</translation>
+ <source>Cut</source>
+ <translation>Cut</translation>
</message>
<message>
- <source>Model_FeatureValidator: Attribute "tool_objects" is not initialized.</source>
- <translation>Tools not selected.</translation>
+ <source>Fuse</source>
+ <translation>Fuse</translation>
</message>
<message>
- <source>main_objects - FeaturesPlugin_ValidatorBooleanSelection: Error: This validator can only work with selection list attributes in \"Boolean\" feature.</source>
- <translation></translation>
+ <source>Common</source>
+ <translation>Common</translation>
</message>
<message>
- <source>main_objects - FeaturesPlugin_ValidatorBooleanSelection: Error: Empty attribute selection.</source>
- <translation>Objects not selected.</translation>
+ <source>Fill</source>
+ <translation>Fill</translation>
</message>
<message>
- <source>main_objects - FeaturesPlugin_ValidatorBooleanSelection: Error: Empty selection context.</source>
- <translation></translation>
+ <source>Smash</source>
+ <translation>Smash</translation>
</message>
+ </context>
+ <context>
+ <name>Boolean:main_objects</name>
+ <message>
+ <source>Main objects</source>
+ <translation>Main objects</translation>
+ </message>
+ <message>
+ <source>Select objects</source>
+ <translation>Select objects</translation>
+ </message>
+ </context>
+ <context>
+ <name>Boolean:main_objects:FeaturesPlugin_ValidatorBooleanSelection</name>
<message>
- <source>main_objects - FeaturesPlugin_ValidatorBooleanSelection: Error: Result construction not allowed for selection.</source>
+ <source>Error: Empty attribute selection.</source>
+ <translation>Select objects.</translation>
+ </message>
+ <message>
+ <source>Error: Empty selection context.</source>
+ <translation>Selected object invalid.</translation>
+ </message>
+ <message>
+ <source>Error: Result construction not allowed for selection.</source>
<translation>Result construction not allowed for selection.</translation>
</message>
<message>
- <source>main_objects - FeaturesPlugin_ValidatorBooleanSelection: Error: Empty shape.</source>
- <translation></translation>
+ <source>Error: Empty shape.</source>
+ <translation>Selected object invalid.</translation>
</message>
<message>
- <source>main_objects - FeaturesPlugin_ValidatorBooleanSelection: Error: Local selection not allowed.</source>
+ <source>Error: Local selection not allowed.</source>
<translation>Local selection not allowed.</translation>
</message>
<message>
- <source>main_objects - FeaturesPlugin_ValidatorBooleanSelection: Error: Selected shape has the wrong type.</source>
+ <source>Error: Selected shape has the wrong type.</source>
<translation>Selected shape has the wrong type.</translation>
</message>
+ </context>
+ <context>
+ <name>Boolean:tool_objects</name>
<message>
- <source>main_objects - FeaturesPlugin_ValidatorBooleanSelection: Error: Selected shape has the wrong type.</source>
- <translation>Selected shape has the wrong type.</translation>
+ <source>Tool objects</source>
+ <translation>Tool objects</translation>
</message>
<message>
- <source>tool_objects - FeaturesPlugin_ValidatorBooleanSelection: Error: This validator can only work with selection list attributes in \"Boolean\" feature.</source>
- <translation></translation>
+ <source>Select tools</source>
+ <translation>Select tools</translation>
</message>
+ </context>
+ <context>
+ <name>Boolean:tool_objects:FeaturesPlugin_ValidatorBooleanSelection</name>
<message>
- <source>tool_objects - FeaturesPlugin_ValidatorBooleanSelection: Error: Empty attribute selection.</source>
- <translation>Tools not selected.</translation>
+ <source>Error: Empty attribute selection.</source>
+ <translation>Select tools.</translation>
</message>
<message>
- <source>tool_objects - FeaturesPlugin_ValidatorBooleanSelection: Error: Empty selection context.</source>
- <translation></translation>
+ <source>Error: Empty selection context.</source>
+ <translation>Selected tool invalid.</translation>
</message>
<message>
- <source>tool_objects - FeaturesPlugin_ValidatorBooleanSelection: Error: Result construction not allowed for selection.</source>
+ <source>Error: Result construction not allowed for selection.</source>
<translation>Result construction not allowed for selection.</translation>
</message>
<message>
- <source>tool_objects - FeaturesPlugin_ValidatorBooleanSelection: Error: Empty shape.</source>
- <translation></translation>
+ <source>Error: Empty shape.</source>
+ <translation>Selected tool invalid.</translation>
</message>
<message>
- <source>tool_objects - FeaturesPlugin_ValidatorBooleanSelection: Error: Local selection not allowed.</source>
+ <source>Error: Local selection not allowed.</source>
<translation>Local selection not allowed.</translation>
</message>
<message>
- <source>tool_objects - FeaturesPlugin_ValidatorBooleanSelection: Error: Selected shape has the wrong type.</source>
- <translation>Selected shape has the wrong type.</translation>
+ <source>Error: Selected shape has the wrong type.</source>
+ <translation>Selected shape has the wrong type.</translation>
+ </message>
+ </context>
+ <context>
+ <name>Boolean:GeomValidators_BooleanArguments</name>
+ <message>
+ <source>Not enough arguments</source>
+ <translation>Not enough arguments.</translation>
+ </message>
+ </context>
+ <context>
+ <name>Boolean:Model_FeatureValidator</name>
+ <message>
+ <source>Attribute "bool_type" is not initialized.</source>
+ <translation>Select operation type.</translation>
+ </message>
+ <message>
+ <source>Attribute "main_objects" is not initialized.</source>
+ <translation>Select objects.</translation>
</message>
<message>
- <source>tool_objects - FeaturesPlugin_ValidatorBooleanSelection: Error: Selected shape has the wrong type.</source>
- <translation>Selected shape has the wrong type.</translation>
+ <source>Attribute "tool_objects" is not initialized.</source>
+ <translation>Select tools.</translation>
</message>
</context>
-
<context>
- <name>Partition</name>
+ <name>Partition:GeomValidators_MinObjectsSelected</name>
<message>
- <source>GeomValidators_MinObjectsSelected: Error: Attribute \"%1\" should contain at least %2 items.</source>
+ <source>Error: Attribute \"%1\" should contain at least %2 items.</source>
<translation>At least %2 object(s) should be selected in "%1"</translation>
</message>
-
+ </context>
+ <context>
+ <name>Partition:GeomValidators_MinObjectsSelected</name>
<message>
- <source>GeomValidators_MinObjectsSelected: Error: Wrong number of arguments (expected 2): selection list id and min number of objects</source>
+ <source>Error: Wrong number of arguments (expected 2): selection list id and min number of objects</source>
<translation>Wrong number of validator "GeomValidators_MinObjectsSelected" arguments(expected 2): selection list id and min number of objects.</translation>
</message>
+ </context>
+ <context>
+ <name>Partition:GeomValidators_MinObjectsSelected</name>
<message>
- <source>GeomValidators_MinObjectsSelected: Error: Could not get attribute \"%1\".</source>
+ <source>Error: Could not get attribute \"%1\".</source>
<translation>Objects not selected.</translation>
</message>
-
+ </context>
+ <context>
+ <name>Partition:Model_FeatureValidator</name>
<message>
- <source>Model_FeatureValidator: Attribute "base_objects" is not initialized.</source>
+ <source>Attribute "base_objects" is not initialized.</source>
<translation>Objects not selected.</translation>
</message>
+ </context>
+ <context>
+ <name>Partition:base_objects:FeaturesPlugin_ValidatorPartitionSelection</name>
<message>
- <source>base_objects - FeaturesPlugin_ValidatorPartitionSelection: Error: This validator can only work with selection list in \"Partition\" feature.</source>
+ <source>Error: This validator can only work with selection list in \"Partition\" feature.</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>Partition:base_objects:FeaturesPlugin_ValidatorPartitionSelection</name>
<message>
- <source>base_objects - FeaturesPlugin_ValidatorPartitionSelection: Error: Only body shapes and construction planes are allowed for selection.</source>
+ <source>Error: Only body shapes and construction planes are allowed for selection.</source>
<translation>Only body shapes and construction planes are allowed for selection.</translation>
</message>
+ </context>
+ <context>
+ <name>Partition:base_objects:FeaturesPlugin_ValidatorPartitionSelection</name>
<message>
- <source>base_objects - FeaturesPlugin_ValidatorPartitionSelection: Error: Only body shapes and construction planes are allowed for selection.</source>
+ <source>Error: Only body shapes and construction planes are allowed for selection.</source>
<translation>Only body shapes and construction planes are allowed for selection.</translation>
</message>
</context>
-
<context>
- <name>Pipe</name>
+ <name>Pipe:Model_FeatureValidator</name>
<message>
- <source>Model_FeatureValidator: Attribute "base_objects" is not initialized.</source>
+ <source>Attribute "base_objects" is not initialized.</source>
<translation>Base object for pipe is not selected.</translation>
</message>
+ </context>
+ <context>
+ <name>Pipe:Model_FeatureValidator</name>
<message>
- <source>Model_FeatureValidator: Attribute "binormal" is not initialized.</source>
+ <source>Attribute "binormal" is not initialized.</source>
<translation>Binormal vector is not selected.</translation>
</message>
+ </context>
+ <context>
+ <name>Pipe:Model_FeatureValidator</name>
<message>
- <source>Model_FeatureValidator: Attribute "path_object" is not initialized.</source>
+ <source>Attribute "path_object" is not initialized.</source>
<translation>Object for pipe path is not selected.</translation>
</message>
+ </context>
+ <context>
+ <name>Pipe:binormal:GeomValidators_ShapeType</name>
<message>
- <source>binormal - GeomValidators_ShapeType: The object is empty</source>
+ <source>The object is empty</source>
<translation>Binormal vector is not selected.</translation>
</message>
+ </context>
+ <context>
+ <name>Pipe:path_object:FeaturesPlugin_ValidatorPipePath</name>
<message>
- <source>path_object - FeaturesPlugin_ValidatorPipePath: Error: Empty context.</source>
+ <source>Error: Empty context.</source>
<translation>Object for pipe path is not selected.</translation>
</message>
-
+ </context>
+ <context>
+ <name>Pipe:FeaturesPlugin_ValidatorPipeLocations</name>
<message>
- <source>FeaturesPlugin_ValidatorPipeLocations: Error: Feature \"%1\" does not supported by this validator.</source>
+ <source>Error: Feature \"%1\" does not supported by this validator.</source>
<translation>Feature "%1" does not supported validator "FeaturesPlugin_ValidatorPipeLocations".</translation>
</message>
+ </context>
+ <context>
+ <name>Pipe:FeaturesPlugin_ValidatorPipeLocations</name>
<message>
- <source>FeaturesPlugin_ValidatorPipeLocations: Error: Could not get \"%1\" attribute.</source>
+ <source>Error: Could not get \"%1\" attribute.</source>
<translation>Could not get "%1" attribute</translation>
</message>
+ </context>
+ <context>
+ <name>Pipe:FeaturesPlugin_ValidatorPipeLocations</name>
<message>
- <source>FeaturesPlugin_ValidatorPipeLocations: Error: Number of locations should be the same as base objects.</source>
+ <source>Error: Number of locations should be the same as base objects.</source>
<translation>Number of locations should be the same as base objects.</translation>
</message>
-
+ </context>
+ <context>
+ <name>Pipe:Model_FeatureValidator</name>
<message>
- <source>Model_FeatureValidator: Attribute "base_objects" is not initialized.</source>
+ <source>Attribute "base_objects" is not initialized.</source>
<translation>>Base object for pipe is not selected.</translation>
</message>
+ </context>
+ <context>
+ <name>Pipe:Model_FeatureValidator</name>
<message>
- <source>Model_FeatureValidator: Attribute "path_object" is not initialized.</source>
+ <source>Attribute "path_object" is not initialized.</source>
<translation>Object for pipe path is not selected.</translation>
</message>
+ </context>
+ <context>
+ <name>Pipe:Model_FeatureValidator</name>
<message>
- <source>Model_FeatureValidator: Attribute "binormal" is not initialized.</source>
+ <source>Attribute "binormal" is not initialized.</source>
<translation>Binormal vector is not selected.</translation>
</message>
+ </context>
+ <context>
+ <name>Pipe:Model_FeatureValidator</name>
<message>
- <source>Model_FeatureValidator: Attribute "locations_objects" is not initialized.</source>
+ <source>Attribute "locations_objects" is not initialized.</source>
<translation>Locations not selected.</translation>
</message>
+ </context>
+ <context>
+ <name>Pipe:base_objects:FeaturesPlugin_ValidatorBaseForGeneration</name>
<message>
- <source>base_objects - FeaturesPlugin_ValidatorBaseForGeneration: Error: Validator parameters is empty.</source>
+ <source>Error: Validator parameters is empty.</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>Pipe:base_objects:FeaturesPlugin_ValidatorBaseForGeneration</name>
<message>
- <source>base_objects - FeaturesPlugin_ValidatorBaseForGeneration: Error: Attribute contains unacceptable shape.</source>
+ <source>Error: Attribute contains unacceptable shape.</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>Pipe:base_objects:FeaturesPlugin_ValidatorBaseForGeneration</name>
<message>
- <source>base_objects - FeaturesPlugin_ValidatorBaseForGeneration: Error: Empty context.</source>
+ <source>Error: Empty context.</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>Pipe:base_objects:FeaturesPlugin_ValidatorBaseForGeneration</name>
<message>
- <source>base_objects - FeaturesPlugin_ValidatorBaseForGeneration: Error: Compound should contain only faces and edges.</source>
+ <source>Error: Compound should contain only faces and edges.</source>
<translation>Compound should contain only faces and edges.</translation>
</message>
+ </context>
+ <context>
+ <name>Pipe:base_objects:FeaturesPlugin_ValidatorBaseForGeneration</name>
<message>
- <source>base_objects - FeaturesPlugin_ValidatorBaseForGeneration: Error: Object from this sketch is already selected. Sketch is not allowed for selection.</source>
+ <source>Error: Object from this sketch is already selected. Sketch is not allowed for selection.</source>
<translation>Object from this sketch is already selected. Sketch is not allowed for selection.</translation>
</message>
+ </context>
+ <context>
+ <name>Pipe:base_objects:FeaturesPlugin_ValidatorBaseForGeneration</name>
<message>
- <source>base_objects - FeaturesPlugin_ValidatorBaseForGeneration: Error: Whole sketch with this object is already selected. Don't allow to select this object.</source>
+ <source>Error: Whole sketch with this object is already selected. Don't allow to select this object.</source>
<translation>Whole sketch with this object is already selected. Don't allow to select this object.</translation>
</message>
+ </context>
+ <context>
+ <name>Pipe:base_objects:FeaturesPlugin_ValidatorBaseForGeneration</name>
<message>
- <source>base_objects - FeaturesPlugin_ValidatorBaseForGeneration: Error: Wire with wrong orientation selected.</source>
+ <source>Error: Wire with wrong orientation selected.</source>
<translation>Wire with wrong orientation selected.</translation>
</message>
+ </context>
+ <context>
+ <name>Pipe:base_objects:FeaturesPlugin_ValidatorBaseForGeneration</name>
<message>
- <source>base_objects - FeaturesPlugin_ValidatorBaseForGeneration: Error: Objects with such wire already selected. Don't allow to select this object.</source>
+ <source>Error: Objects with such wire already selected. Don't allow to select this object.</source>
<translation>Objects with such wire already selected. Don't allow to select this object.</translation>
</message>
+ </context>
+ <context>
+ <name>Pipe:base_objects:FeaturesPlugin_ValidatorBaseForGeneration</name>
<message>
- <source>base_objects - FeaturesPlugin_ValidatorBaseForGeneration: Error: Empty attribute.</source>
+ <source>Error: Empty attribute.</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>Pipe:base_objects:FeaturesPlugin_ValidatorBaseForGeneration</name>
<message>
- <source>base_objects - FeaturesPlugin_ValidatorBaseForGeneration: Error: Attribute have empty context.</source>
+ <source>Error: Attribute have empty context.</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>Pipe:base_objects:FeaturesPlugin_ValidatorBaseForGeneration</name>
<message>
- <source>base_objects - FeaturesPlugin_ValidatorBaseForGeneration: Error: Empty shape selected</source>
+ <source>Error: Empty shape selected</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>Pipe:base_objects:FeaturesPlugin_ValidatorBaseForGeneration</name>
<message>
- <source>base_objects - FeaturesPlugin_ValidatorBaseForGeneration: Error: Infinite constructions is not allowed as base.</source>
+ <source>Error: Infinite constructions is not allowed as base.</source>
<translation>Infinite constructions is not allowed as base.</translation>
</message>
+ </context>
+ <context>
+ <name>Pipe:base_objects:FeaturesPlugin_ValidatorBaseForGeneration</name>
<message>
- <source>base_objects - FeaturesPlugin_ValidatorBaseForGeneration: Error: Selected shape is in the local selection. Only global selection is allowed.</source>
+ <source>Error: Selected shape is in the local selection. Only global selection is allowed.</source>
<translation>Selected shape is in the local selection. Only global selection is allowed.</translation>
</message>
+ </context>
+ <context>
+ <name>Pipe:base_objects:FeaturesPlugin_ValidatorBaseForGeneration</name>
<message>
- <source>base_objects - FeaturesPlugin_ValidatorBaseForGeneration: Error: Selected shape has unacceptable type. Acceptable types are: faces or wires on sketch, whole sketch(if it has at least one face), and whole objects with shape types: %1</source>
+ <source>Error: Selected shape has unacceptable type. Acceptable types are: faces or wires on sketch, whole sketch(if it has at least one face), and whole objects with shape types: %1</source>
<translation>Selected shape has unacceptable type. Acceptable types are: faces or wires on sketch, whole sketch(if it has at least one face), and whole objects with shape types: %1</translation>
</message>
+ </context>
+ <context>
+ <name>Pipe:base_objects:FeaturesPlugin_ValidatorBaseForGeneration</name>
<message>
- <source>base_objects - FeaturesPlugin_ValidatorBaseForGeneration: Error: Attribute \"%1\" does not supported by this validator.</source>
+ <source>Error: Attribute \"%1\" does not supported by this validator.</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>Pipe:path_object:FeaturesPlugin_ValidatorPipePath</name>
<message>
- <source>path_object - FeaturesPlugin_ValidatorPipePath: Error: This validator can only work with path selector in \"Pipe\" feature.</source>
+ <source>Error: This validator can only work with path selector in \"Pipe\" feature.</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>Pipe:path_object:FeaturesPlugin_ValidatorPipePath</name>
<message>
- <source>path_object - FeaturesPlugin_ValidatorPipePath: Error: Empty context.</source>
+ <source>Error: Empty context.</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>Pipe:path_object:FeaturesPlugin_ValidatorPipePath</name>
<message>
- <source>path_object - FeaturesPlugin_ValidatorPipePath: Error: Local selection of wires not allowed.</source>
+ <source>Error: Local selection of wires not allowed.</source>
<translation>Local selection of wires not allowed.</translation>
</message>
+ </context>
+ <context>
+ <name>Pipe:binormal:GeomValidators_ShapeType</name>
<message>
- <source>binormal - GeomValidators_ShapeType: It does not contain element with acceptable shape type. The type should be one of the next: %1</source>
+ <source>It does not contain element with acceptable shape type. The type should be one of the next: %1</source>
<translation>It does not contain element with acceptable shape type. The type should be one of the next: %1</translation>
</message>
+ </context>
+ <context>
+ <name>Pipe:binormal:GeomValidators_ShapeType</name>
<message>
- <source>binormal - GeomValidators_ShapeType: It has reference to an empty attribute</source>
+ <source>It has reference to an empty attribute</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>Pipe:binormal:GeomValidators_ShapeType</name>
<message>
- <source>binormal - GeomValidators_ShapeType: Shape type is \"%1\", it should be \"%2\"</source>
+ <source>Shape type is \"%1\", it should be \"%2\"</source>
<translation>Shape type is "%1", it should be "%2"</translation>
</message>
+ </context>
+ <context>
+ <name>Pipe:binormal:GeomValidators_ShapeType</name>
<message>
- <source>binormal - GeomValidators_ShapeType: The attribute with the %1 type is not processed</source>
+ <source>The attribute with the %1 type is not processed</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>Pipe:binormal:GeomValidators_ShapeType</name>
<message>
- <source>binormal - GeomValidators_ShapeType: The object is empty</source>
+ <source>The object is empty</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>Pipe:binormal:GeomValidators_ShapeType</name>
<message>
- <source>binormal - GeomValidators_ShapeType: The result is empty</source>
+ <source>The result is empty</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>Pipe:binormal:GeomValidators_ShapeType</name>
<message>
- <source>binormal - GeomValidators_ShapeType: The shape is empty</source>
+ <source>The shape is empty</source>
<translation></translation>
</message>
</context>
-
<context>
- <name>Remove_SubShapes</name>
+ <name>Remove_SubShapes:FeaturesPlugin_ValidatorRemoveSubShapesResult</name>
<message>
- <source>FeaturesPlugin_ValidatorRemoveSubShapesResult: Error: Base shape is empty.</source>
+ <source>Error: Base shape is empty.</source>
<translation>Base shape is not selected.</translation>
</message>
+ </context>
+ <context>
+ <name>Remove_SubShapes:base_shape:GeomValidators_BodyShapes</name>
<message>
- <source>base_shape - GeomValidators_BodyShapes: Error: Context is empty.</source>
+ <source>Error: Context is empty.</source>
<translation>Selected object has empty context.</translation>
</message>
+ </context>
+ <context>
+ <name>Remove_SubShapes:subshapes:FeaturesPlugin_ValidatorRemoveSubShapesSelection</name>
<message>
- <source>subshapes - FeaturesPlugin_ValidatorRemoveSubShapesSelection: Error: Empty context.</source>
+ <source>Error: Empty context.</source>
<translation>Selected object has empty context.</translation>
</message>
-
+ </context>
+ <context>
+ <name>Remove_SubShapes:FeaturesPlugin_ValidatorRemoveSubShapesResult</name>
<message>
- <source>FeaturesPlugin_ValidatorRemoveSubShapesResult: Error: Feature \"%1\" does not supported by this validator.</source>
+ <source>Error: Feature \"%1\" does not supported by this validator.</source>
<translation>Feature "%1" does not supported validator "FeaturesPlugin_ValidatorRemoveSubShapesResult".</translation>
</message>
+ </context>
+ <context>
+ <name>Remove_SubShapes:FeaturesPlugin_ValidatorRemoveSubShapesResult</name>
<message>
- <source>FeaturesPlugin_ValidatorRemoveSubShapesResult: Error: Could not get \"%1\" attribute.</source>
+ <source>Error: Could not get \"%1\" attribute.</source>
<translation>Could not get "%1" attribute.</translation>
</message>
+ </context>
+ <context>
+ <name>Remove_SubShapes:FeaturesPlugin_ValidatorRemoveSubShapesResult</name>
<message>
- <source>FeaturesPlugin_ValidatorRemoveSubShapesResult: Error: Base shape is empty.</source>
+ <source>Error: Base shape is empty.</source>
<translation>Base shape is empty.</translation>
</message>
+ </context>
+ <context>
+ <name>Remove_SubShapes:FeaturesPlugin_ValidatorRemoveSubShapesResult</name>
<message>
- <source>FeaturesPlugin_ValidatorRemoveSubShapesResult: Error: Resulting shape is not valid.</source>
+ <source>Error: Resulting shape is not valid.</source>
<translation>Resulting shape is not valid.</translation>
</message>
-
+ </context>
+ <context>
+ <name>Remove_SubShapes:Model_FeatureValidator</name>
<message>
- <source>Model_FeatureValidator: Attribute "base_shape" is not initialized.</source>
+ <source>Attribute "base_shape" is not initialized.</source>
<translation>Base shape is not selected.</translation>
</message>
+ </context>
+ <context>
+ <name>Remove_SubShapes:Model_FeatureValidator</name>
<message>
- <source>Model_FeatureValidator: Attribute "subshapes" is not initialized.</source>
+ <source>Attribute "subshapes" is not initialized.</source>
<translation>Sub-shapes is not selected.</translation>
</message>
+ </context>
+ <context>
+ <name>Remove_SubShapes:base_shape:GeomValidators_ShapeType</name>
<message>
- <source>base_shape - GeomValidators_ShapeType: It does not contain element with acceptable shape type. The type should be one of the next: %1</source>
+ <source>It does not contain element with acceptable shape type. The type should be one of the next: %1</source>
<translation>It does not contain element with acceptable shape type. The type should be one of the next: %1</translation>
</message>
+ </context>
+ <context>
+ <name>Remove_SubShapes:base_shape:GeomValidators_ShapeType</name>
<message>
- <source>base_shape - GeomValidators_ShapeType: It has reference to an empty attribute</source>
+ <source>It has reference to an empty attribute</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>Remove_SubShapes:base_shape:GeomValidators_ShapeType</name>
<message>
- <source>base_shape - GeomValidators_ShapeType: Shape type is \"%1\", it should be \"%2\"</source>
+ <source>Shape type is \"%1\", it should be \"%2\"</source>
<translation>Shape type is "%1", it should be "%2"</translation>
</message>
+ </context>
+ <context>
+ <name>Remove_SubShapes:base_shape:GeomValidators_ShapeType</name>
<message>
- <source>base_shape - GeomValidators_ShapeType: The attribute with the %1 type is not processed</source>
+ <source>The attribute with the %1 type is not processed</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>Remove_SubShapes:base_shape:GeomValidators_ShapeType</name>
<message>
- <source>base_shape - GeomValidators_ShapeType: The object is empty</source>
+ <source>The object is empty</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>Remove_SubShapes:base_shape:GeomValidators_ShapeType</name>
<message>
- <source>base_shape - GeomValidators_ShapeType: The result is empty</source>
+ <source>The result is empty</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>Remove_SubShapes:base_shape:GeomValidators_ShapeType</name>
<message>
- <source>base_shape - GeomValidators_ShapeType: The shape is empty</source>
+ <source>The shape is empty</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>Remove_SubShapes:base_shape:GeomValidators_BodyShapes</name>
<message>
- <source>base_shape - GeomValidators_BodyShapes: Error: Context is empty.</source>
+ <source>Error: Context is empty.</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>Remove_SubShapes:base_shape:GeomValidators_BodyShapes</name>
<message>
- <source>base_shape - GeomValidators_BodyShapes: Error: Result construction selected.</source>
+ <source>Error: Result construction selected.</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>Remove_SubShapes:base_shape:GeomValidators_BodyShapes</name>
<message>
- <source>base_shape - GeomValidators_BodyShapes: Error: Attribute \"%1\" does not supported by this validator.</source>
+ <source>Error: Attribute \"%1\" does not supported by this validator.</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>Remove_SubShapes:subshapes:FeaturesPlugin_ValidatorRemoveSubShapesSelection</name>
<message>
- <source>subshapes - FeaturesPlugin_ValidatorRemoveSubShapesSelection: Error: This validator can only work with selection list in \"Remove Sub-Shapes\" feature.</source>
+ <source>Error: This validator can only work with selection list in \"Remove Sub-Shapes\" feature.</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>Remove_SubShapes:subshapes:FeaturesPlugin_ValidatorRemoveSubShapesSelection</name>
<message>
- <source>subshapes - FeaturesPlugin_ValidatorRemoveSubShapesSelection: Error: Could not get \"%1\" attribute.</source>
+ <source>Error: Could not get \"%1\" attribute.</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>Remove_SubShapes:subshapes:FeaturesPlugin_ValidatorRemoveSubShapesSelection</name>
<message>
- <source>subshapes - FeaturesPlugin_ValidatorRemoveSubShapesSelection: Error: Empty context.</source>
+ <source>Error: Empty context.</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>Remove_SubShapes:subshapes:FeaturesPlugin_ValidatorRemoveSubShapesSelection</name>
<message>
- <source>subshapes - FeaturesPlugin_ValidatorRemoveSubShapesSelection: Error: Empty base shape.</source>
+ <source>Error: Empty base shape.</source>
<translation>Base shape not selected.</translation>
</message>
+ </context>
+ <context>
+ <name>Remove_SubShapes:subshapes:FeaturesPlugin_ValidatorRemoveSubShapesSelection</name>
<message>
- <source>subshapes - FeaturesPlugin_ValidatorRemoveSubShapesSelection: Error: Only sub-shapes of selected shape is allowed for selection.</source>
+ <source>Error: Only sub-shapes of selected shape is allowed for selection.</source>
<translation>Only sub-shapes of selected shape is allowed for selection.</translation>
</message>
</context>
-
<context>
- <name>Intersection</name>
+ <name>Intersection:Model_FeatureValidator</name>
<message>
- <source>Model_FeatureValidator: Attribute "main_objects" is not initialized.</source>
+ <source>Attribute "main_objects" is not initialized.</source>
<translation>Main objects is not selected.</translation>
</message>
+ </context>
+ <context>
+ <name>Intersection:Model_FeatureValidator</name>
<message>
- <source>Model_FeatureValidator: Attribute "tool_objects" is not initialized.</source>
+ <source>Attribute "tool_objects" is not initialized.</source>
<translation>Tool objects is not selected.</translation>
</message>
-
+ </context>
+ <context>
+ <name>Intersection:tool_objects:GeomValidators_IntersectionSelection</name>
<message>
- <source>tool_objects - GeomValidators_IntersectionSelection: Error: empty selection.</source>
+ <source>Error: empty selection.</source>
<translation>Empty selection.</translation>
</message>
+ </context>
+ <context>
+ <name>Intersection:tool_objects:GeomValidators_IntersectionSelection</name>
<message>
- <source>tool_objects - GeomValidators_IntersectionSelection: Error: empty attribute selection.</source>
+ <source>Error: empty attribute selection.</source>
<translation>Attribute selection is empty.</translation>
</message>
+ </context>
+ <context>
+ <name>Intersection:tool_objects:GeomValidators_IntersectionSelection</name>
<message>
- <source>tool_objects - GeomValidators_IntersectionSelection: Error: empty selection context.</source>
+ <source>Error: empty selection context.</source>
<translation>Selected object has empty context.</translation>
</message>
+ </context>
+ <context>
+ <name>Intersection:tool_objects:GeomValidators_IntersectionSelection</name>
<message>
- <source>tool_objects - GeomValidators_IntersectionSelection: Error: empty feature.</source>
+ <source>Error: empty feature.</source>
<translation>Selected objects has empty feature.</translation>
</message>
+ </context>
+ <context>
+ <name>Intersection:tool_objects:GeomValidators_IntersectionSelection</name>
<message>
- <source>tool_objects - GeomValidators_IntersectionSelection: Error: %1 shape is not allowed for selection.</source>
+ <source>Error: %1 shape is not allowed for selection.</source>
<translation>%1 shape is not allowed for selection.</translation>
</message>
+ </context>
+ <context>
+ <name>Intersection:tool_objects:GeomValidators_IntersectionSelection</name>
<message>
- <source>tool_objects - GeomValidators_IntersectionSelection: Error: empty shape.</source>
+ <source>Error: empty shape.</source>
<translation>Empty shape selected.</translation>
</message>
+ </context>
+ <context>
+ <name>Intersection:tool_objects:GeomValidators_IntersectionSelection</name>
<message>
- <source>tool_objects - GeomValidators_IntersectionSelection: Error: selected shape has the wrong type.</source>
+ <source>Error: selected shape has the wrong type.</source>
<translation>Selected shape has the wrong type.</translation>
</message>
-
+ </context>
+ <context>
+ <name>Intersection:Model_FeatureValidator</name>
<message>
- <source>Model_FeatureValidator: Attribute "main_objects" is not initialized.</source>
+ <source>Attribute "main_objects" is not initialized.</source>
<translation>Main objects is not selected.</translation>
</message>
+ </context>
+ <context>
+ <name>Intersection:Model_FeatureValidator</name>
<message>
- <source>Model_FeatureValidator: Attribute "tool_objects" is not initialized.</source>
+ <source>Attribute "tool_objects" is not initialized.</source>
<translation>Tool objects is not selected.</translation>
</message>
+ </context>
+ <context>
+ <name>Intersection:main_objects:GeomValidators_IntersectionSelection</name>
<message>
- <source>main_objects - GeomValidators_IntersectionSelection: Error: empty selection.</source>
+ <source>Error: empty selection.</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>Intersection:main_objects:GeomValidators_IntersectionSelection</name>
<message>
- <source>main_objects - GeomValidators_IntersectionSelection: Error: empty attribute selection.</source>
+ <source>Error: empty attribute selection.</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>Intersection:main_objects:GeomValidators_IntersectionSelection</name>
<message>
- <source>main_objects - GeomValidators_IntersectionSelection: Error: empty selection context.</source>
+ <source>Error: empty selection context.</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>Intersection:main_objects:GeomValidators_IntersectionSelection</name>
<message>
- <source>main_objects - GeomValidators_IntersectionSelection: Error: empty feature.</source>
+ <source>Error: empty feature.</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>Intersection:main_objects:GeomValidators_IntersectionSelection</name>
<message>
- <source>main_objects - GeomValidators_IntersectionSelection: Error: %1 shape is not allowed for selection.</source>
+ <source>Error: %1 shape is not allowed for selection.</source>
<translation>%1 shape is not allowed for selection.</translation>
</message>
+ </context>
+ <context>
+ <name>Intersection:main_objects:GeomValidators_IntersectionSelection</name>
<message>
- <source>main_objects - GeomValidators_IntersectionSelection: Error: empty shape.</source>
+ <source>Error: empty shape.</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>Intersection:main_objects:GeomValidators_IntersectionSelection</name>
<message>
- <source>main_objects - GeomValidators_IntersectionSelection: Error: Local selection not allowed.</source>
+ <source>Error: Local selection not allowed.</source>
<translation>Local selection not allowed.</translation>
</message>
+ </context>
+ <context>
+ <name>Intersection:main_objects:GeomValidators_IntersectionSelection</name>
<message>
- <source>main_objects - GeomValidators_IntersectionSelection: Error: selected shape has the wrong type.</source>
+ <source>Error: selected shape has the wrong type.</source>
<translation>Selected shape has the wrong type.</translation>
</message>
</context>
-
<context>
- <name>Placement</name>
+ <name>Placement:Model_FeatureValidator</name>
<message>
- <source>Model_FeatureValidator: Attribute "placement_end_shape" is not initialized.</source>
+ <source>Attribute "placement_end_shape" is not initialized.</source>
<translation>End placement shape is not defined.</translation>
</message>
+ </context>
+ <context>
+ <name>Placement:placement_end_shape:PartSet_DifferentObjects</name>
<message>
- <source>placement_end_shape - PartSet_DifferentObjects: The feature uses one shape in placement_end_shape and placement_start_shape attributes.</source>
+ <source>The feature uses one shape in placement_end_shape and placement_start_shape attributes.</source>
<translation>Start and end placement shapes are the same.</translation>
</message>
+ </context>
+ <context>
+ <name>Placement:Model_FeatureValidator</name>
<message>
- <source>Model_FeatureValidator: Attribute "placement_centering" is not initialized.</source>
+ <source>Attribute "placement_centering" is not initialized.</source>
<translation>Attribute "placement_centering" is not initialized.</translation>
</message>
+ </context>
+ <context>
+ <name>Placement:Model_FeatureValidator</name>
<message>
- <source>Model_FeatureValidator: Attribute "placement_objects_list" is not initialized.</source>
+ <source>Attribute "placement_objects_list" is not initialized.</source>
<translation>Objects for placement are not selected.</translation>
</message>
-
+ </context>
+ <context>
+ <name>Placement:placement_objects_list:FeaturesPlugin_ValidatorTransform</name>
<message>
- <source>placement_objects_list - FeaturesPlugin_ValidatorTransform: The attribute with the %1 type is not processed</source>
+ <source>The attribute with the %1 type is not processed</source>
<translation>The attribute with the %1 type is not processed.</translation>
</message>
+ </context>
+ <context>
+ <name>Placement:placement_objects_list:FeaturesPlugin_ValidatorTransform</name>
<message>
- <source>placement_objects_list - FeaturesPlugin_ValidatorTransform: Objects from the %1 group can be selected in the %2 document, but an objects from the %3 group is selected.</source>
+ <source>Objects from the %1 group can be selected in the %2 document, but an objects from the %3 group is selected.</source>
<translation>Objects from the %1 group can be selected in the %2 document, but an objects from the %3 group is selected.</translation>
</message>
-
+ </context>
+ <context>
+ <name>Placement:Model_FeatureValidator</name>
<message>
- <source>Model_FeatureValidator: Attribute "placement_start_shape" is not initialized.</source>
+ <source>Attribute "placement_start_shape" is not initialized.</source>
<translation>Start placement shape is not defined.</translation>
</message>
+ </context>
+ <context>
+ <name>Placement:Model_FeatureValidator</name>
<message>
- <source>Model_FeatureValidator: Attribute "placement_reverse_direction" is not initialized.</source>
+ <source>Attribute "placement_reverse_direction" is not initialized.</source>
<translation></translation>
</message>
</context>
-
<context>
- <name>Rotation</name>
+ <name>Rotation:Model_FeatureValidator</name>
<message>
- <source>Model_FeatureValidator: Attribute "angle" is not initialized.</source>
+ <source>Attribute "angle" is not initialized.</source>
<translation>Angle is not defined.</translation>
</message>
+ </context>
+ <context>
+ <name>Rotation:Model_FeatureValidator</name>
<message>
- <source>Model_FeatureValidator: Attribute "axis_object" is not initialized.</source>
+ <source>Attribute "axis_object" is not initialized.</source>
<translation>Rotation axis is not selected.</translation>
</message>
+ </context>
+ <context>
+ <name>Rotation:axis_object:GeomValidators_ShapeType</name>
<message>
- <source>axis_object - GeomValidators_ShapeType: The object is empty</source>
+ <source>The object is empty</source>
<translation>Rotation axis is not selected.</translation>
</message>
-
+ </context>
+ <context>
+ <name>Rotation:axis_object:GeomValidators_ShapeType</name>
<message>
- <source>axis_object - GeomValidators_ShapeType: It does not contain element with acceptable shape type. The type should be one of the next: %1</source>
+ <source>It does not contain element with acceptable shape type. The type should be one of the next: %1</source>
<translation>Selected objects contain element with unacceptable shape type.</translation>
</message>
+ </context>
+ <context>
+ <name>Rotation:axis_object:GeomValidators_ShapeType</name>
<message>
- <source>axis_object - GeomValidators_ShapeType: It has reference to an empty attribute</source>
+ <source>It has reference to an empty attribute</source>
<translation>It has reference to an empty attribute.</translation>
</message>
+ </context>
+ <context>
+ <name>Rotation:axis_object:GeomValidators_ShapeType</name>
<message>
- <source>axis_object - GeomValidators_ShapeType: Shape type is \"%1\", it should be \"%2\"</source>
+ <source>Shape type is \"%1\", it should be \"%2\"</source>
<translation>Shape type is "%1", it should be "%2".</translation>
</message>
+ </context>
+ <context>
+ <name>Rotation:axis_object:GeomValidators_ShapeType</name>
<message>
- <source>axis_object - GeomValidators_ShapeType: The attribute with the %1 type is not processed</source>
+ <source>The attribute with the %1 type is not processed</source>
<translation>The attribute with the %1 type is not processed.</translation>
</message>
+ </context>
+ <context>
+ <name>Rotation:axis_object:GeomValidators_ShapeType</name>
<message>
- <source>axis_object - GeomValidators_ShapeType: The object is empty</source>
+ <source>The object is empty</source>
<translation>Rotation axis is not selected.</translation>
</message>
+ </context>
+ <context>
+ <name>Rotation:axis_object:GeomValidators_ShapeType</name>
<message>
- <source>axis_object - GeomValidators_ShapeType: The result is empty</source>
+ <source>The result is empty</source>
<translation>Rotation axis is not selected.</translation>
</message>
+ </context>
+ <context>
+ <name>Rotation:axis_object:GeomValidators_ShapeType</name>
<message>
- <source>axis_object - GeomValidators_ShapeType: The shape is empty</source>
+ <source>The shape is empty</source>
<translation>Rotation axis is not selected.</translation>
</message>
-
+ </context>
+ <context>
+ <name>Rotation:Model_FeatureValidator</name>
<message>
- <source>Model_FeatureValidator: Attribute "main_objects" is not initialized.</source>
+ <source>Attribute "main_objects" is not initialized.</source>
<translation>Objects not selected.</translation>
</message>
+ </context>
+ <context>
+ <name>Rotation:Model_FeatureValidator</name>
<message>
- <source>Model_FeatureValidator: Attribute "axis_object" is not initialized.</source>
+ <source>Attribute "axis_object" is not initialized.</source>
<translation>Axis not selected.</translation>
</message>
+ </context>
+ <context>
+ <name>Rotation:Model_FeatureValidator</name>
<message>
- <source>Model_FeatureValidator: Attribute "angle" is not initialized.</source>
+ <source>Attribute "angle" is not initialized.</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>Rotation:main_objects:FeaturesPlugin_ValidatorTransform</name>
<message>
- <source>main_objects - FeaturesPlugin_ValidatorTransform: The attribute with the %1 type is not processed</source>
+ <source>The attribute with the %1 type is not processed</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>Rotation:main_objects:FeaturesPlugin_ValidatorTransform</name>
<message>
- <source>main_objects - FeaturesPlugin_ValidatorTransform: Objects from the %1 group can be selected in the %2 document, but an objects from the %3 group is selected.</source>
+ <source>Objects from the %1 group can be selected in the %2 document, but an objects from the %3 group is selected.</source>
<translation>Objects from the %1 group can be selected in the %2 document, but an objects from the %3 group is selected.</translation>
</message>
</context>
-
<context>
- <name>Translation</name>
+ <name>Translation:Model_FeatureValidator</name>
<message>
- <source>Model_FeatureValidator: Attribute "axis_object" is not initialized.</source>
+ <source>Attribute "axis_object" is not initialized.</source>
<translation>Translation axis is not selected.</translation>
</message>
+ </context>
+ <context>
+ <name>Translation:axis_object:GeomValidators_ShapeType</name>
<message>
- <source>axis_object - GeomValidators_ShapeType: The object is empty</source>
+ <source>The object is empty</source>
<translation>Translation axis is not selected.</translation>
</message>
-
+ </context>
+ <context>
+ <name>Translation:axis_object:GeomValidators_ShapeType</name>
<message>
- <source>axis_object - GeomValidators_ShapeType: It does not contain element with acceptable shape type. The type should be one of the next: %1</source>
+ <source>It does not contain element with acceptable shape type. The type should be one of the next: %1</source>
<translation>It does not contain element with acceptable shape type. The type should be one of the next: %1</translation>
</message>
+ </context>
+ <context>
+ <name>Translation:axis_object:GeomValidators_ShapeType</name>
<message>
- <source>axis_object - GeomValidators_ShapeType: It has reference to an empty attribute</source>
+ <source>It has reference to an empty attribute</source>
<translation>It has reference to an empty attribute</translation>
</message>
+ </context>
+ <context>
+ <name>Translation:axis_object:GeomValidators_ShapeType</name>
<message>
- <source>axis_object - GeomValidators_ShapeType: Shape type is \"%1\", it should be \"%2\"</source>
+ <source>Shape type is \"%1\", it should be \"%2\"</source>
<translation>Shape type is "%1", it should be "%2".</translation>
</message>
+ </context>
+ <context>
+ <name>Translation:axis_object:GeomValidators_ShapeType</name>
<message>
- <source>axis_object - GeomValidators_ShapeType: The attribute with the %1 type is not processed</source>
+ <source>The attribute with the %1 type is not processed</source>
<translation>The attribute with the %1 type is not processed</translation>
</message>
+ </context>
+ <context>
+ <name>Translation:axis_object:GeomValidators_ShapeType</name>
<message>
- <source>axis_object - GeomValidators_ShapeType: The result is empty</source>
+ <source>The result is empty</source>
<translation>Translation axis is not selected.</translation>
</message>
+ </context>
+ <context>
+ <name>Translation:axis_object:GeomValidators_ShapeType</name>
<message>
- <source>axis_object - GeomValidators_ShapeType: The shape is empty</source>
+ <source>The shape is empty</source>
<translation>Translation axis is not selected.</translation>
</message>
-
+ </context>
+ <context>
+ <name>Translation:axis_object:GeomValidators_ShapeType</name>
<message>
- <source>axis_object - GeomValidators_ShapeType: The shape is empty</source>
+ <source>The shape is empty</source>
<translation>Translation axis is not selected.</translation>
</message>
+ </context>
+ <context>
+ <name>Translation:Model_FeatureValidator</name>
<message>
- <source>Model_FeatureValidator: Attribute "distance" is not initialized.</source>
+ <source>Attribute "distance" is not initialized.</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>Translation:main_objects:FeaturesPlugin_ValidatorTransform</name>
<message>
- <source>main_objects - FeaturesPlugin_ValidatorTransform: The attribute with the %1 type is not processed</source>
+ <source>The attribute with the %1 type is not processed</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>Translation:main_objects:FeaturesPlugin_ValidatorTransform</name>
<message>
- <source>main_objects - FeaturesPlugin_ValidatorTransform: Objects from the %1 group can be selected in the %2 document, but an objects from the %3 group is selected.</source>
+ <source>Objects from the %1 group can be selected in the %2 document, but an objects from the %3 group is selected.</source>
<translation>Objects from the %1 group can be selected in the %2 document, but an objects from the %3 group is selected.</translation>
</message>
</context>
-
<context>
- <name>Union</name>
+ <name>Union:FeaturesPlugin_ValidatorUnionArguments</name>
<message>
- <source>FeaturesPlugin_ValidatorUnionArguments: Error: This validator supports only \"%1\" feature.</source>
+ <source>Error: This validator supports only \"%1\" feature.</source>
<translation>This validator "FeaturesPlugin_ValidatorUnionArguments" supports only "%1" feature.</translation>
</message>
+ </context>
+ <context>
+ <name>Union:FeaturesPlugin_ValidatorUnionArguments</name>
<message>
- <source>FeaturesPlugin_ValidatorUnionArguments: Error: Could not get \"%1\" attribute.</source>
+ <source>Error: Could not get \"%1\" attribute.</source>
<translation>Could not get "%1" attribute.</translation>
</message>
+ </context>
+ <context>
+ <name>Union:FeaturesPlugin_ValidatorUnionArguments</name>
<message>
- <source>FeaturesPlugin_ValidatorUnionArguments: Error: Not all shapes have shared topology.</source>
+ <source>Error: Not all shapes have shared topology.</source>
<translation>Not all shapes have shared topology.</translation>
</message>
-
+ </context>
+ <context>
+ <name>Union:Model_FeatureValidator</name>
<message>
- <source>Model_FeatureValidator: Attribute "base_objects" is not initialized.</source>
+ <source>Attribute "base_objects" is not initialized.</source>
<translation>Objects not selected.</translation>
</message>
+ </context>
+ <context>
+ <name>Union:base_objects:FeaturesPlugin_ValidatorUnionSelection</name>
<message>
- <source>base_objects - FeaturesPlugin_ValidatorUnionSelection: Error: This validator can only work with selection list in \"%1\" feature.</source>
+ <source>Error: This validator can only work with selection list in \"%1\" feature.</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>Union:base_objects:FeaturesPlugin_ValidatorUnionSelection</name>
<message>
- <source>base_objects - FeaturesPlugin_ValidatorUnionSelection: Error: Whole compsolids not allowed for selection.</source>
+ <source>Error: Whole compsolids not allowed for selection.</source>
<translation>Whole compsolids not allowed for selection.</translation>
</message>
+ </context>
+ <context>
+ <name>Union:GeomValidators_MinObjectsSelected</name>
<message>
- <source>GeomValidators_MinObjectsSelected: Error: Wrong number of arguments (expected 2): selection list id and min number of objects</source>
+ <source>Error: Wrong number of arguments (expected 2): selection list id and min number of objects</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>Union:GeomValidators_MinObjectsSelected</name>
<message>
- <source>GeomValidators_MinObjectsSelected: Error: Could not get attribute \"%1\".</source>
+ <source>Error: Could not get attribute \"%1\".</source>
<translation></translation>
</message>
+ </context>
+ <context>
+ <name>Union:GeomValidators_MinObjectsSelected</name>
<message>
- <source>GeomValidators_MinObjectsSelected: Error: Attribute \"%1\" should contain at least %2 items.</source>
+ <source>Error: Attribute \"%1\" should contain at least %2 items.</source>
<translation></translation>
</message>
</context>