-// GEOM GEOMGUI : GUI for Geometry component
+// Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE
//
-// Copyright (C) 2003 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
-// CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
-//
-// This library is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License.
-//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
-//
-// You should have received a copy of the GNU Lesser General Public
-// License along with this library; if not, write to the Free Software
-// Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-//
-// See http://www.opencascade.org/SALOME/ or email : webmaster.salome@opencascade.org
+// Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
+// CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
//
+// This library is free software; you can redistribute it and/or
+// modify it under the terms of the GNU Lesser General Public
+// License as published by the Free Software Foundation; either
+// version 2.1 of the License.
//
+// This library is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+// Lesser General Public License for more details.
+//
+// You should have received a copy of the GNU Lesser General Public
+// License along with this library; if not, write to the Free Software
+// Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+//
+// See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
+//
+// GEOM GEOMGUI : GUI for Geometry component
+// File : EntityGUI_SketcherDlg.cxx
+// Author : Damien COQUERET, Open CASCADE S.A.S.
//
-// File : EntityGUI_SketcherDlg.cxx
-// Author : Damien COQUERET
-// Module : GEOM
-// $Header:
-
#include "EntityGUI_SketcherDlg.h"
-#include "Sketcher_Profile.hxx"
-#include "GEOM_Displayer.h"
-
-#include "SUIT_Desktop.h"
-#include "SUIT_Session.h"
-#include "SUIT_MessageBox.h"
-#include "SUIT_ResourceMgr.h"
-#include "SalomeApp_Application.h"
-#include "SalomeApp_SelectionMgr.h"
-
-#include <qpushbutton.h>
-#include <qlabel.h>
+#include "EntityGUI_Widgets.h"
+#include <QtxDoubleSpinBox.h>
+
+#include <GEOMBase.h>
+#include <GeometryGUI.h>
+#include <GEOMImpl_Types.hxx>
+#include <Geom_Surface.hxx>
+#include <Geom_Plane.hxx>
+
+#include <SUIT_Desktop.h>
+#include <SUIT_Session.h>
+#include <SUIT_MessageBox.h>
+#include <SUIT_ResourceMgr.h>
+#include <SalomeApp_Application.h>
+#include <SalomeApp_Notebook.h>
+#include <LightApp_Application.h>
+#include <LightApp_SelectionMgr.h>
+
+#include <QKeyEvent>
#include <BRep_Tool.hxx>
#include <TopExp.hxx>
#include <TopoDS.hxx>
#include <BRepBuilderAPI_Transform.hxx>
#include <BRepBuilderAPI_MakeWire.hxx>
+#include <Sketcher_Profile.hxx>
-#include "GEOMImpl_Types.hxx"
+#include <SalomeApp_Study.h>
-#include "utilities.h"
-
-using namespace std;
+#include <gp_Pln.hxx>
//=================================================================================
// class : EntityGUI_SketcherDlg()
-// purpose : Constructs a EntityGUI_SketcherDlg which is a child of 'parent', with the
+// purpose : Constructs a EntityGUI_SketcherDlg which is a child of 'parent', with the
// name 'name' and widget flags set to 'f'.
// The dialog will by default be modeless, unless you set 'modal' to
// TRUE to construct a modal dialog.
//=================================================================================
-EntityGUI_SketcherDlg::EntityGUI_SketcherDlg(GeometryGUI* GUI, QWidget* parent, const char* name, bool modal, WFlags fl)
- :EntityGUI_Skeleton_QTD(parent, name, modal, WStyle_Customize | WStyle_NormalBorder | WStyle_Title | WStyle_SysMenu | WDestructiveClose), myIsAllAdded( false ),
- GEOMBase_Helper( dynamic_cast<SUIT_Desktop*>( parent ) ),
- myGeometryGUI( GUI )
+EntityGUI_SketcherDlg::EntityGUI_SketcherDlg( GeometryGUI* GUI, QWidget* parent,
+ bool modal, Qt::WindowFlags fl,
+ const double lineWidth )
+ : QDialog( parent, fl ),
+ myIsAllAdded( false ),
+ myIsApply( false ),
+ GEOMBase_Helper( dynamic_cast<SUIT_Desktop*>( parent ) ),
+ myGeometryGUI( GUI ),
+ myLineWidth( lineWidth )
{
- myGeometryGUI->SetActiveDialogBox(this);
+ setModal( modal );
+ setAttribute( Qt::WA_DeleteOnClose );
- if ( !name ) setName("EntityGUI_SketcherDlg");
+ myGeometryGUI->SetActiveDialogBox(this);
- buttonCancel->setText(tr("GEOM_BUT_CANCEL"));
- buttonEnd->setText(tr("GEOM_BUT_END_SKETCH"));
- buttonClose->setText(tr("GEOM_BUT_CLOSE_SKETCH"));
+ MainWidget = new EntityGUI_Skeleton( this );
+ QVBoxLayout* topLayout = new QVBoxLayout( this );
+ topLayout->setMargin( 9 ); topLayout->setSpacing( 6 );
- GroupVal->close(TRUE);
- GroupDest2->close(TRUE);
- GroupDest3->close(TRUE);
+ MainWidget->buttonCancel->setText( tr( "GEOM_BUT_CANCEL" ) );
+ MainWidget->buttonEnd->setText( tr( "GEOM_BUT_END_SKETCH" ) );
+ MainWidget->buttonClose->setText( tr( "GEOM_BUT_CLOSE_SKETCH" ) );
+ MainWidget->buttonHelp->setText( tr( "GEOM_BUT_HELP" ) );
- QPixmap image0(SUIT_Session::session()->resourceMgr()->loadPixmap("GEOM",tr("ICON_SELECT")));
- QPixmap image1(SUIT_Session::session()->resourceMgr()->loadPixmap("GEOM",tr("ICON_DLG_UNDO")));
- QPixmap image2(SUIT_Session::session()->resourceMgr()->loadPixmap("GEOM",tr("ICON_DLG_REDO")));
+ QPixmap image0( SUIT_Session::session()->resourceMgr()->loadPixmap( "GEOM", tr( "ICON_SELECT" ) ) );
+ QPixmap image1( SUIT_Session::session()->resourceMgr()->loadPixmap( "GEOM", tr( "ICON_DLG_UNDO" ) ) );
+ QPixmap image2( SUIT_Session::session()->resourceMgr()->loadPixmap( "GEOM", tr( "ICON_DLG_REDO" ) ) );
- setCaption(tr("GEOM_SKETCHER_TITLE"));
+ setWindowTitle( tr( "GEOM_SKETCHER_TITLE" ) );
- GroupConstructors->setTitle(tr("GEOM_SKETCHER_EL"));
- RadioButton1->setText(tr("GEOM_SKETCHER_SEGMENT"));
- RadioButton2->setText(tr("GEOM_SKETCHER_ARC"));
- GroupDest->setTitle(tr("GEOM_SKETCHER_DEST"));
- GroupDest1->setTitle(tr("GEOM_SKETCHER_TYPE"));
- RB_Dest1->setText(tr("GEOM_SKETCHER_POINT"));
- RB_Dest2->setText(tr("GEOM_SKETCHER_DIR"));
+ MainWidget->GroupConstructors->setTitle( tr( "GEOM_SKETCHER_EL" ) );
+ MainWidget->RadioButton1->setText( tr( "GEOM_SKETCHER_SEGMENT" ) );
+ MainWidget->RadioButton2->setText( tr( "GEOM_SKETCHER_ARC" ) );
+ MainWidget->GroupDest->setTitle( tr( "GEOM_SKETCHER_DEST" ) );
+ MainWidget->GroupDest1->setTitle( tr( "GEOM_SKETCHER_TYPE" ) );
+ MainWidget->RB_Dest1->setText( tr( "GEOM_SKETCHER_POINT" ) );
+ MainWidget->RB_Dest2->setText( tr( "GEOM_SKETCHER_DIR" ) );
/***************************************************************/
- GroupPt = new EntityGUI_Point_QTD(GroupDest, "GroupPt");
- GroupPt->GroupPoint->setTitle(tr("GEOM_SKETCHER_POINT"));
- GroupPt->RB_Point1->setText(tr("GEOM_SKETCHER_ABS"));
- GroupPt->RB_Point2->setText(tr("GEOM_SKETCHER_REL"));
- GroupPt->RB_Point3->setText(tr("GEOM_SKETCHER_SEL"));
-
- GroupD1 = new EntityGUI_Dir1_QTD(GroupDest, "GroupD1");
- GroupD1->GroupDir1->setTitle(tr("GEOM_SKETCHER_DIR"));
- GroupD1->RB_Dir11->setText(tr("GEOM_SKETCHER_ANGLE"));
- GroupD1->RB_Dir12->setText(tr("GEOM_SKETCHER_PER"));
- GroupD1->RB_Dir13->setText(tr("GEOM_SKETCHER_TAN"));
- GroupD1->RB_Dir14->setText(tr("GEOM_SKETCHER_VXVY"));
-
- GroupD2 = new EntityGUI_Dir2_QTD(GroupDest, "GroupD2");
- GroupD2->GroupDir2->setTitle(tr("GEOM_SKETCHER_DIR"));
- GroupD2->RB_Dir21->setText(tr("GEOM_SKETCHER_LENGTH"));
- GroupD2->RB_Dir22->setText(tr("GEOM_SKETCHER_X"));
- GroupD2->RB_Dir23->setText(tr("GEOM_SKETCHER_Y"));
-
- Group1Sel = new EntityGUI_1Sel_QTD(this, "Group1Sel");
- Group1Sel->TextLabel1->setText(tr("GEOM_SKETCHER_POINT2"));
- Group1Sel->GroupBox1->setTitle(tr("GEOM_SKETCHER_VALUES"));
- Group1Sel->buttonApply->setText(tr("GEOM_SKETCHER_APPLY"));
- Group1Sel->PushButton1->setPixmap(image0);
- Group1Sel->buttonUndo->setPixmap(image1);
- Group1Sel->buttonRedo->setPixmap(image2);
+
+ GroupBox1 = new QGroupBox(tr("GEOM_CS"), this);
+ QGridLayout* OwnLayout = new QGridLayout(GroupBox1);
+ OwnLayout->setSpacing(6);
+ OwnLayout->setMargin(11);
+
+ ComboBox1 = new QComboBox(GroupBox1);
+ OwnLayout->addWidget(ComboBox1);
+
+ topLayout->addWidget(GroupBox1);
+ topLayout->addWidget( MainWidget );
+
+ GroupPt = new EntityGUI_Point( MainWidget->DestCnt );
+
+ GroupPt->GroupPoint->setTitle( tr( "GEOM_SKETCHER_POINT" ) );
+ GroupPt->RB_Point1->setText( tr( "GEOM_SKETCHER_ABS" ) );
+ GroupPt->RB_Point2->setText( tr( "GEOM_SKETCHER_REL" ) );
+ GroupPt->RB_Point3->setText( tr( "GEOM_SKETCHER_SEL" ) );
+
+ GroupD1 = new EntityGUI_Dir1( MainWidget->DestCnt );
+
+ GroupD1->GroupDir1->setTitle( tr( "GEOM_SKETCHER_DIR" ) );
+ GroupD1->RB_Dir11->setText( tr( "GEOM_SKETCHER_ANGLE" ) );
+ GroupD1->RB_Dir12->setText( tr( "GEOM_SKETCHER_PER" ) );
+ GroupD1->RB_Dir13->setText( tr( "GEOM_SKETCHER_TAN" ) );
+ GroupD1->RB_Dir14->setText( tr( "GEOM_SKETCHER_VXVY" ) );
+
+ GroupD2 = new EntityGUI_Dir2( MainWidget->DestCnt );
+
+ GroupD2->GroupDir2->setTitle( tr( "GEOM_SKETCHER_DIR" ) );
+ GroupD2->RB_Dir21->setText( tr( "GEOM_SKETCHER_LENGTH" ) );
+ GroupD2->RB_Dir22->setText( tr( "GEOM_SKETCHER_X" ) );
+ GroupD2->RB_Dir23->setText( tr( "GEOM_SKETCHER_Y" ) );
+
+ Group1Sel = new EntityGUI_1Sel( MainWidget->SkeletonCnt );
+
+ Group1Sel->TextLabel1->setText( tr( "GEOM_SKETCHER_POINT2" ) );
+ Group1Sel->GroupBox1->setTitle( tr( "GEOM_SKETCHER_VALUES" ) );
+ Group1Sel->buttonApply->setText( tr( "GEOM_SKETCHER_APPLY" ) );
+ Group1Sel->PushButton1->setIcon( image0 );
+ Group1Sel->buttonUndo->setIcon( image1 );
+ Group1Sel->buttonRedo->setIcon( image2 );
Group1Sel->LineEdit1->setReadOnly( true );
- Group1Spin = new EntityGUI_1Spin(this, "Group1Spin");
- Group1Spin->GroupBox1->setTitle(tr("GEOM_SKETCHER_VALUES"));
- Group1Spin->buttonApply->setText(tr("GEOM_SKETCHER_APPLY"));
- Group1Spin->buttonUndo->setPixmap(image1);
- Group1Spin->buttonRedo->setPixmap(image2);
-
- Group2Spin = new EntityGUI_2Spin(this, "Group2Spin");
- Group2Spin->GroupBox1->setTitle(tr("GEOM_SKETCHER_VALUES"));
- Group2Spin->buttonApply->setText(tr("GEOM_SKETCHER_APPLY"));
- Group2Spin->buttonUndo->setPixmap(image1);
- Group2Spin->buttonRedo->setPixmap(image2);
-
- Group3Spin = new EntityGUI_3Spin(this, "Group3Spin");
- Group3Spin->GroupBox1->setTitle(tr("GEOM_SKETCHER_VALUES"));
- Group3Spin->buttonApply->setText(tr("GEOM_SKETCHER_APPLY"));
- Group3Spin->buttonUndo->setPixmap(image1);
- Group3Spin->buttonRedo->setPixmap(image2);
-
- Group4Spin = new EntityGUI_4Spin(this, "Group4Spin");
- Group4Spin->GroupBox1->setTitle(tr("GEOM_SKETCHER_VALUES"));
- Group4Spin->buttonApply->setText(tr("GEOM_SKETCHER_APPLY"));
- Group4Spin->buttonUndo->setPixmap(image1);
- Group4Spin->buttonRedo->setPixmap(image2);
-
- Layout5->addMultiCellWidget(GroupPt, 1, 1, 0, 1);
- Layout5->addWidget(GroupD1, 1, 0);
- Layout5->addWidget(GroupD2, 1, 1);
-
- Layout1->addWidget(Group1Sel, 2, 0);
- Layout1->addWidget(Group1Spin, 2, 0);
- Layout1->addWidget(Group2Spin, 2, 0);
- Layout1->addWidget(Group3Spin, 2, 0);
- Layout1->addWidget(Group4Spin, 2, 0);
+ Group1Spin = new EntityGUI_1Spin( MainWidget->SkeletonCnt );
+ Group1Spin->GroupBox1->setTitle( tr( "GEOM_SKETCHER_VALUES" ) );
+ Group1Spin->buttonApply->setText( tr( "GEOM_SKETCHER_APPLY" ) );
+ Group1Spin->buttonUndo->setIcon( image1 );
+ Group1Spin->buttonRedo->setIcon( image2 );
+
+ Group2Spin = new EntityGUI_2Spin( MainWidget->SkeletonCnt );
+ Group2Spin->GroupBox1->setTitle( tr( "GEOM_SKETCHER_VALUES" ) );
+ Group2Spin->buttonApply->setText( tr( "GEOM_SKETCHER_APPLY" ) );
+ Group2Spin->buttonUndo->setIcon( image1 );
+ Group2Spin->buttonRedo->setIcon( image2 );
+
+ Group3Spin = new EntityGUI_3Spin( MainWidget->SkeletonCnt );
+ Group3Spin->GroupBox1->setTitle( tr( "GEOM_SKETCHER_VALUES" ) );
+ Group3Spin->buttonApply->setText( tr( "GEOM_SKETCHER_APPLY" ) );
+ Group3Spin->buttonUndo->setIcon( image1 );
+ Group3Spin->buttonRedo->setIcon( image2 );
+
+ Group4Spin = new EntityGUI_4Spin( MainWidget->SkeletonCnt );
+ Group4Spin->GroupBox1->setTitle( tr( "GEOM_SKETCHER_VALUES" ) );
+ Group4Spin->buttonApply->setText( tr( "GEOM_SKETCHER_APPLY" ) );
+ Group4Spin->buttonUndo->setIcon( image1 );
+ Group4Spin->buttonRedo->setIcon( image2 );
+
+ QGridLayout* DestCntLayout = new QGridLayout( MainWidget->DestCnt );
+ DestCntLayout->setMargin( 0 ); DestCntLayout->setSpacing( 6 );
+ DestCntLayout->addWidget( GroupPt, 0, 0, 1, 2 );
+ DestCntLayout->addWidget( GroupD1, 1, 0 );
+ DestCntLayout->addWidget( GroupD2, 1, 1 );
+
+ QVBoxLayout* SkeletonCntlayout = new QVBoxLayout( MainWidget->SkeletonCnt );
+ SkeletonCntlayout->setMargin( 0 ); SkeletonCntlayout->setSpacing( 6 );
+ SkeletonCntlayout->addWidget( Group1Sel, 0, 0 );
+ SkeletonCntlayout->addWidget( Group1Spin, 0, 0 );
+ SkeletonCntlayout->addWidget( Group2Spin, 0, 0 );
+ SkeletonCntlayout->addWidget( Group3Spin, 0, 0 );
+ SkeletonCntlayout->addWidget( Group4Spin, 0, 0 );
/***************************************************************/
+ QButtonGroup* ButtonGroup = new QButtonGroup( this );
+ ButtonGroup->addButton( MainWidget->RB_Dest1, 1 );
+ ButtonGroup->addButton( MainWidget->RB_Dest2, 0 );
+
/* signals and slots connections */
- connect(buttonEnd, SIGNAL(clicked()), this, SLOT(ClickOnEnd()));
- connect(buttonClose, SIGNAL(clicked()), this, SLOT(ClickOnEnd()));
- connect(buttonCancel, SIGNAL(clicked()), this, SLOT(ClickOnCancel()));
-
- connect(Group1Sel->buttonApply, SIGNAL(clicked()), this, SLOT(ClickOnApply()));
- connect(Group1Sel->buttonUndo, SIGNAL(clicked()), this, SLOT(ClickOnUndo()));
- connect(Group1Sel->buttonRedo, SIGNAL(clicked()), this, SLOT(ClickOnRedo()));
- connect(Group1Spin->buttonApply, SIGNAL(clicked()), this, SLOT(ClickOnApply()));
- connect(Group1Spin->buttonUndo, SIGNAL(clicked()), this, SLOT(ClickOnUndo()));
- connect(Group1Spin->buttonRedo, SIGNAL(clicked()), this, SLOT(ClickOnRedo()));
- connect(Group2Spin->buttonApply, SIGNAL(clicked()), this, SLOT(ClickOnApply()));
- connect(Group2Spin->buttonUndo, SIGNAL(clicked()), this, SLOT(ClickOnUndo()));
- connect(Group2Spin->buttonRedo, SIGNAL(clicked()), this, SLOT(ClickOnRedo()));
- connect(Group3Spin->buttonApply, SIGNAL(clicked()), this, SLOT(ClickOnApply()));
- connect(Group3Spin->buttonUndo, SIGNAL(clicked()), this, SLOT(ClickOnUndo()));
- connect(Group3Spin->buttonRedo, SIGNAL(clicked()), this, SLOT(ClickOnRedo()));
- connect(Group4Spin->buttonApply, SIGNAL(clicked()), this, SLOT(ClickOnApply()));
- connect(Group4Spin->buttonUndo, SIGNAL(clicked()), this, SLOT(ClickOnUndo()));
- connect(Group4Spin->buttonRedo, SIGNAL(clicked()), this, SLOT(ClickOnRedo()));
-
- connect(GroupConstructors, SIGNAL(clicked(int)), this, SLOT(TypeClicked(int)));
- connect(GroupDest1, SIGNAL(clicked(int)), this, SLOT(DestClicked(int)));
- connect(GroupPt->GroupPoint, SIGNAL(clicked(int)), this, SLOT(PointClicked(int)));
- connect(GroupD1->GroupDir1, SIGNAL(clicked(int)), this, SLOT(Dir1Clicked(int)));
- connect(GroupD2->GroupDir2, SIGNAL(clicked(int)), this, SLOT(Dir2Clicked(int)));
-
- connect(Group1Sel->LineEdit1, SIGNAL(returnPressed()), this, SLOT(LineEditReturnPressed()));
- connect(Group1Sel->PushButton1, SIGNAL(clicked()), this, SLOT(SetEditCurrentArgument()));
-
- connect(Group1Spin->SpinBox_DX, SIGNAL(valueChanged(double)), this, SLOT(ValueChangedInSpinBox(double)));
- connect(Group2Spin->SpinBox_DX, SIGNAL(valueChanged(double)), this, SLOT(ValueChangedInSpinBox(double)));
- connect(Group2Spin->SpinBox_DY, SIGNAL(valueChanged(double)), this, SLOT(ValueChangedInSpinBox(double)));
- connect(Group3Spin->SpinBox_DX, SIGNAL(valueChanged(double)), this, SLOT(ValueChangedInSpinBox(double)));
- connect(Group3Spin->SpinBox_DY, SIGNAL(valueChanged(double)), this, SLOT(ValueChangedInSpinBox(double)));
- connect(Group3Spin->SpinBox_DZ, SIGNAL(valueChanged(double)), this, SLOT(ValueChangedInSpinBox(double)));
- connect(Group4Spin->SpinBox_DX, SIGNAL(valueChanged(double)), this, SLOT(ValueChangedInSpinBox(double)));
- connect(Group4Spin->SpinBox_DY, SIGNAL(valueChanged(double)), this, SLOT(ValueChangedInSpinBox(double)));
- connect(Group4Spin->SpinBox_DZ, SIGNAL(valueChanged(double)), this, SLOT(ValueChangedInSpinBox(double)));
- connect(Group4Spin->SpinBox_DS, SIGNAL(valueChanged(double)), this, SLOT(ValueChangedInSpinBox(double)));
-
- connect(myGeometryGUI, SIGNAL(SignalDefaultStepValueChanged(double)), Group1Spin->SpinBox_DX, SLOT(SetStep(double)));
- connect(myGeometryGUI, SIGNAL(SignalDefaultStepValueChanged(double)), Group2Spin->SpinBox_DX, SLOT(SetStep(double)));
- connect(myGeometryGUI, SIGNAL(SignalDefaultStepValueChanged(double)), Group2Spin->SpinBox_DY, SLOT(SetStep(double)));
- connect(myGeometryGUI, SIGNAL(SignalDefaultStepValueChanged(double)), Group3Spin->SpinBox_DX, SLOT(SetStep(double)));
- connect(myGeometryGUI, SIGNAL(SignalDefaultStepValueChanged(double)), Group3Spin->SpinBox_DY, SLOT(SetStep(double)));
- connect(myGeometryGUI, SIGNAL(SignalDefaultStepValueChanged(double)), Group3Spin->SpinBox_DZ, SLOT(SetStep(double)));
- connect(myGeometryGUI, SIGNAL(SignalDefaultStepValueChanged(double)), Group4Spin->SpinBox_DX, SLOT(SetStep(double)));
- connect(myGeometryGUI, SIGNAL(SignalDefaultStepValueChanged(double)), Group4Spin->SpinBox_DY, SLOT(SetStep(double)));
- connect(myGeometryGUI, SIGNAL(SignalDefaultStepValueChanged(double)), Group4Spin->SpinBox_DZ, SLOT(SetStep(double)));
- connect(myGeometryGUI, SIGNAL(SignalDefaultStepValueChanged(double)), Group4Spin->SpinBox_DS, SLOT(SetStep(double)));
-
- connect(myGeometryGUI, SIGNAL(SignalDeactivateActiveDialog()), this, SLOT(DeactivateActiveDialog()));
- connect(myGeometryGUI, SIGNAL(SignalCloseAllDialogs()), this, SLOT(ClickOnCancel()));
+ connect( MainWidget->buttonEnd, SIGNAL( clicked() ), this, SLOT( ClickOnEnd() ) );
+ connect( MainWidget->buttonClose, SIGNAL( clicked() ), this, SLOT( ClickOnEnd() ) );
+ connect( MainWidget->buttonCancel, SIGNAL( clicked() ), this, SLOT( ClickOnCancel() ) );
+ connect( MainWidget->buttonHelp, SIGNAL( clicked() ), this, SLOT( ClickOnHelp() ) );
+
+ connect( Group1Sel->buttonApply, SIGNAL( clicked() ), this, SLOT( ClickOnApply() ) );
+ connect( Group1Sel->buttonUndo, SIGNAL( clicked() ), this, SLOT( ClickOnUndo() ) );
+ connect( Group1Sel->buttonRedo, SIGNAL( clicked() ), this, SLOT( ClickOnRedo() ) );
+ connect( Group1Spin->buttonApply, SIGNAL( clicked() ), this, SLOT( ClickOnApply() ) );
+ connect( Group1Spin->buttonUndo, SIGNAL( clicked() ), this, SLOT( ClickOnUndo() ) );
+ connect( Group1Spin->buttonRedo, SIGNAL( clicked() ), this, SLOT( ClickOnRedo() ) );
+ connect( Group2Spin->buttonApply, SIGNAL( clicked() ), this, SLOT( ClickOnApply() ) );
+ connect( Group2Spin->buttonUndo, SIGNAL( clicked() ), this, SLOT( ClickOnUndo() ) );
+ connect( Group2Spin->buttonRedo, SIGNAL( clicked() ), this, SLOT( ClickOnRedo() ) );
+ connect( Group3Spin->buttonApply, SIGNAL( clicked() ), this, SLOT( ClickOnApply() ) );
+ connect( Group3Spin->buttonUndo, SIGNAL( clicked() ), this, SLOT( ClickOnUndo() ) );
+ connect( Group3Spin->buttonRedo, SIGNAL( clicked() ), this, SLOT( ClickOnRedo() ) ) ;
+ connect( Group4Spin->buttonApply, SIGNAL( clicked() ), this, SLOT( ClickOnApply() ) );
+ connect( Group4Spin->buttonUndo, SIGNAL( clicked() ), this, SLOT( ClickOnUndo() ) );
+ connect( Group4Spin->buttonRedo, SIGNAL( clicked() ), this, SLOT( ClickOnRedo() ) );
+
+ connect( MainWidget->ButtonGroup, SIGNAL( buttonClicked( int ) ), this, SLOT( TypeClicked( int ) ) );
+ connect( ButtonGroup, SIGNAL( buttonClicked( int ) ), this, SLOT( DestClicked( int ) ) );
+ connect( GroupPt->ButtonGroup, SIGNAL( buttonClicked( int ) ), this, SLOT( PointClicked( int ) ) );
+ connect( GroupD1->ButtonGroup, SIGNAL( buttonClicked( int ) ), this, SLOT( Dir1Clicked( int ) ) );
+ connect( GroupD2->ButtonGroup, SIGNAL( buttonClicked( int ) ), this, SLOT( Dir2Clicked( int ) ));
+
+ connect( Group1Sel->LineEdit1, SIGNAL( returnPressed() ), this, SLOT( LineEditReturnPressed() ) );
+ connect( Group1Sel->PushButton1, SIGNAL( clicked() ), this, SLOT( SetEditCurrentArgument() ) );
+
+ connect( Group1Spin->SpinBox_DX, SIGNAL( valueChanged( double ) ), this, SLOT( ValueChangedInSpinBox( double ) ) );
+ connect( Group2Spin->SpinBox_DX, SIGNAL( valueChanged( double ) ), this, SLOT( ValueChangedInSpinBox( double ) ) );
+ connect( Group2Spin->SpinBox_DY, SIGNAL( valueChanged( double ) ), this, SLOT( ValueChangedInSpinBox( double ) ) );
+ connect( Group3Spin->SpinBox_DX, SIGNAL( valueChanged( double ) ), this, SLOT( ValueChangedInSpinBox( double ) ) );
+ connect( Group3Spin->SpinBox_DY, SIGNAL( valueChanged( double ) ), this, SLOT( ValueChangedInSpinBox( double ) ) );
+ connect( Group3Spin->SpinBox_DZ, SIGNAL( valueChanged( double ) ), this, SLOT( ValueChangedInSpinBox( double ) ) );
+ connect( Group4Spin->SpinBox_DX, SIGNAL( valueChanged( double ) ), this, SLOT( ValueChangedInSpinBox( double ) ) );
+ connect( Group4Spin->SpinBox_DY, SIGNAL( valueChanged( double ) ), this, SLOT( ValueChangedInSpinBox( double ) ) );
+ connect( Group4Spin->SpinBox_DZ, SIGNAL( valueChanged( double ) ), this, SLOT( ValueChangedInSpinBox( double ) ) );
+ connect( Group4Spin->SpinBox_DS, SIGNAL( valueChanged( double ) ), this, SLOT( ValueChangedInSpinBox( double ) ) );
+
+ connect( ComboBox1, SIGNAL( activated( int ) ), this, SLOT( SelectionIntoArgument() ) );
+
+ connect( myGeometryGUI, SIGNAL( SignalDefaultStepValueChanged( double ) ), this, SLOT( SetDoubleSpinBoxStep( double ) ) );
+
+ connect( myGeometryGUI, SIGNAL( SignalDeactivateActiveDialog() ), this, SLOT( DeactivateActiveDialog() ) );
+ connect( myGeometryGUI, SIGNAL( SignalCloseAllDialogs() ), this, SLOT( ClickOnCancel() ) );
+
+ // install event filter on spin-boxes to provide Apply action on Return pressed
+ Group1Spin->SpinBox_DX->installEventFilter(this);
+ Group2Spin->SpinBox_DX->installEventFilter(this);
+ Group2Spin->SpinBox_DY->installEventFilter(this);
+ Group3Spin->SpinBox_DX->installEventFilter(this);
+ Group3Spin->SpinBox_DY->installEventFilter(this);
+ Group3Spin->SpinBox_DZ->installEventFilter(this);
+ Group4Spin->SpinBox_DX->installEventFilter(this);
+ Group4Spin->SpinBox_DY->installEventFilter(this);
+ Group4Spin->SpinBox_DZ->installEventFilter(this);
+ Group4Spin->SpinBox_DS->installEventFilter(this);
Init();
}
//=================================================================================
EntityGUI_SketcherDlg::~EntityGUI_SketcherDlg()
{
- myGeometryGUI->SetActiveDialogBox( 0 );
+ myGeometryGUI->SetActiveDialogBox( 0 );
+}
+
+
+//=================================================================================
+// function : eventFilter()
+// purpose : event filter for spin-boxes to provide Apply action on Return pressed
+//=================================================================================
+bool EntityGUI_SketcherDlg::eventFilter (QObject* object, QEvent* event)
+{
+ if (event->type() == QEvent::KeyPress) {
+ QKeyEvent* ke = (QKeyEvent*)event;
+ if (ke->key() == Qt::Key_Return) {
+ if (object == Group1Spin->SpinBox_DX) {
+ Group1Spin->buttonApply->animateClick();
+ return true;
+ } else if (object == Group2Spin->SpinBox_DX ||
+ object == Group2Spin->SpinBox_DY) {
+ Group2Spin->buttonApply->animateClick();
+ return true;
+ } else if (object == Group3Spin->SpinBox_DX ||
+ object == Group3Spin->SpinBox_DY ||
+ object == Group3Spin->SpinBox_DZ) {
+ Group3Spin->buttonApply->animateClick();
+ return true;
+ } else if (object == Group4Spin->SpinBox_DX ||
+ object == Group4Spin->SpinBox_DY ||
+ object == Group4Spin->SpinBox_DZ ||
+ object == Group4Spin->SpinBox_DS) {
+ Group4Spin->buttonApply->animateClick();
+ return true;
+ }
+ }
+ }
+
+ // Fix of the NPAL16010 bug is removed, because it's not actual with the Qt-4.x
+
+ return QDialog::eventFilter(object, event);
}
myLastX2 = 0.0;
myLastY2 = 0.0;
+ myHelpFileName = "create_sketcher_page.html";
+
/* Get setting of step value from file configuration */
double step = SUIT_Session::session()->resourceMgr()->doubleValue( "Geometry", "SettingsGeomStep", 100.0 );
/* min, max, step and decimals for spin boxes */
- Group1Spin->SpinBox_DX->RangeStepAndValidator(-999999.999, 999999.999, step, 3);
- Group2Spin->SpinBox_DX->RangeStepAndValidator(-999999.999, 999999.999, step, 3);
- Group2Spin->SpinBox_DY->RangeStepAndValidator(-999999.999, 999999.999, step, 3);
- Group3Spin->SpinBox_DX->RangeStepAndValidator(-999999.999, 999999.999, step, 3);
- Group3Spin->SpinBox_DY->RangeStepAndValidator(-999999.999, 999999.999, step, 3);
- Group3Spin->SpinBox_DZ->RangeStepAndValidator(-999999.999, 999999.999, step, 3);
- Group4Spin->SpinBox_DX->RangeStepAndValidator(-999999.999, 999999.999, 0.1, 3);
- Group4Spin->SpinBox_DY->RangeStepAndValidator(-999999.999, 999999.999, 0.1, 3);
- Group4Spin->SpinBox_DZ->RangeStepAndValidator(-999999.999, 999999.999, step, 3);
- Group4Spin->SpinBox_DS->RangeStepAndValidator(-999999.999, 999999.999, 5., 3);
+ initSpinBox( Group1Spin->SpinBox_DX, COORD_MIN, COORD_MAX, step, 3 ); // VSR: TODO: DBL_DIGITS_DISPLAY
+ initSpinBox( Group2Spin->SpinBox_DX, COORD_MIN, COORD_MAX, step, 3 ); // VSR: TODO: DBL_DIGITS_DISPLAY
+ initSpinBox( Group2Spin->SpinBox_DY, COORD_MIN, COORD_MAX, step, 3 ); // VSR: TODO: DBL_DIGITS_DISPLAY
+ initSpinBox( Group3Spin->SpinBox_DX, COORD_MIN, COORD_MAX, step, 3 ); // VSR: TODO: DBL_DIGITS_DISPLAY
+ initSpinBox( Group3Spin->SpinBox_DY, COORD_MIN, COORD_MAX, step, 3 ); // VSR: TODO: DBL_DIGITS_DISPLAY
+ initSpinBox( Group3Spin->SpinBox_DZ, COORD_MIN, COORD_MAX, step, 3 ); // VSR: TODO: DBL_DIGITS_DISPLAY
+ initSpinBox( Group4Spin->SpinBox_DX, COORD_MIN, COORD_MAX, 0.1, 3 ); // VSR: TODO: DBL_DIGITS_DISPLAY
+ initSpinBox( Group4Spin->SpinBox_DY, COORD_MIN, COORD_MAX, 0.1, 3 ); // VSR: TODO: DBL_DIGITS_DISPLAY
+ initSpinBox( Group4Spin->SpinBox_DZ, COORD_MIN, COORD_MAX, step, 3 ); // VSR: TODO: DBL_DIGITS_DISPLAY
+ initSpinBox( Group4Spin->SpinBox_DS, COORD_MIN, COORD_MAX, 5., 3 ); // VSR: TODO: DBL_DIGITS_DISPLAY
/* displays Dialog */
- GroupConstructors->setEnabled(false);
- GroupDest1->setEnabled(false);
- setEnabledUndo(false);
- setEnabledRedo(false);
+ MainWidget->GroupConstructors->setEnabled( false );
+ MainWidget->GroupDest1->setEnabled( false );
+ setEnabledUndo( false );
+ setEnabledRedo( false );
+
+ MainWidget->RadioButton1->setChecked( true );
- RadioButton1->setChecked(true);
+ resize(100,100);
+ TypeClicked( 0 );
- resize( 0, 0 );
- TypeClicked(0);
+ FindLocalCS();
- GEOMBase_Helper::displayPreview();
+ GEOMBase_Helper::displayPreview( false, true, true, myLineWidth );
}
//=================================================================================
void EntityGUI_SketcherDlg::InitClick()
{
- disconnect(((SalomeApp_Application*)(SUIT_Session::session()->activeApplication()))->selectionMgr(), 0, this, 0);
+ disconnect( myGeometryGUI->getApp()->selectionMgr(), 0, this, 0 );
Group1Sel->hide();
Group1Spin->hide();
Group3Spin->hide();
Group4Spin->hide();
- resize(0, 0);
+ resize(100,100);
}
// function : TypeClicked()
// purpose : Radio button management
//=================================================================================
-void EntityGUI_SketcherDlg::TypeClicked(int constructorId)
+void EntityGUI_SketcherDlg::TypeClicked( int constructorId )
{
myConstructorId = constructorId;
- if ( myConstructorId == 0 ) // SEGMENT
- {
- GroupD2->setEnabled(true);
- RB_Dest1->setEnabled(true);
- RB_Dest1->setChecked(true);
- DestClicked(1);
+ if ( myConstructorId == 0 ) { // SEGMENT
+ GroupD2->setEnabled( true );
+ MainWidget->RB_Dest1->setEnabled( true );
+ MainWidget->RB_Dest1->setChecked( true );
+ DestClicked( 1 );
}
- else if ( myConstructorId == 1 ) // ARC
- {
- GroupD2->setEnabled(false);
- RB_Dest1->setEnabled(false);
- RB_Dest2->setChecked(true);
- DestClicked(0);
+ else if ( myConstructorId == 1 ) { // ARC
+ GroupD2->setEnabled( false );
+ MainWidget->RB_Dest1->setEnabled( false );
+ MainWidget->RB_Dest2->setChecked( true );
+ DestClicked( 0 );
}
}
GroupD1->hide();
GroupD2->hide();
- if ( constructorId == 1 )
- { // Point
- GroupPt->RB_Point1->setChecked(true);
+ if ( constructorId == 1 ) {
+ // Point
+ GroupPt->RB_Point1->setChecked( true );
GroupPt->show();
- PointClicked(1); // XY
+ PointClicked( 1 ); // XY
}
- else if ( constructorId == 0 )
- { // Direction
- GroupD1->RB_Dir11->setChecked(true);
+ else if ( constructorId == 0 ) {
+ // Direction
+ GroupD1->RB_Dir11->setChecked( true );
GroupD1->show();
GroupD2->show();
- Dir1Clicked(2); // Angle
+ Dir1Clicked( 2 ); // Angle
}
}
// function : PointClicked()
// purpose : Radio button management
//=================================================================================
-void EntityGUI_SketcherDlg::PointClicked(int constructorId)
+void EntityGUI_SketcherDlg::PointClicked( int constructorId )
{
InitClick();
- if ( myConstructorId == 0 )
- { // SEGMENT
- if ( constructorId == 1 )
- { // XY
+ // Get setting of step value from file configuration
+ double step = SUIT_Session::session()->resourceMgr()->doubleValue( "Geometry", "SettingsGeomStep", 100.0 );
+
+ if ( myConstructorId == 0 ) { // SEGMENT
+ if ( constructorId == 1 ) { // XY
mySketchType = PT_ABS;
- Group2Spin->SpinBox_DX->RangeStepAndValidator(-999999.999, 999999.999, 100., 3);
- Group2Spin->SpinBox_DY->RangeStepAndValidator(-999999.999, 999999.999, 100., 3);
- Group2Spin->TextLabel1->setText(tr("GEOM_SKETCHER_X2"));
- Group2Spin->TextLabel2->setText(tr("GEOM_SKETCHER_Y2"));
+ initSpinBox( Group2Spin->SpinBox_DX, COORD_MIN, COORD_MAX, step, 3 ); // VSR: TODO: DBL_DIGITS_DISPLAY
+ initSpinBox( Group2Spin->SpinBox_DY, COORD_MIN, COORD_MAX, step, 3 ); // VSR: TODO: DBL_DIGITS_DISPLAY
+ Group2Spin->TextLabel1->setText( tr( "GEOM_SKETCHER_X2" ) );
+ Group2Spin->TextLabel2->setText( tr( "GEOM_SKETCHER_Y2" ) );
myX = 0.0;
- Group2Spin->SpinBox_DX->SetValue(myX);
+ Group2Spin->SpinBox_DX->setValue( myX );
myY = 0.0;
- Group2Spin->SpinBox_DY->SetValue(myY);
+ Group2Spin->SpinBox_DY->setValue( myY );
Group2Spin->show();
Group2Spin->buttonApply->setFocus();
- GEOMBase_Helper::displayPreview();
+ GEOMBase_Helper::displayPreview( false, true, true, myLineWidth );
}
- else if ( constructorId == 0 )
- { // DXDY
+ else if ( constructorId == 0 ) { // DXDY
mySketchType = PT_RELATIVE;
- Group2Spin->SpinBox_DX->RangeStepAndValidator(-999999.999, 999999.999, 100., 3);
- Group2Spin->SpinBox_DY->RangeStepAndValidator(-999999.999, 999999.999, 100., 3);
- Group2Spin->TextLabel1->setText(tr("GEOM_SKETCHER_DX2"));
- Group2Spin->TextLabel2->setText(tr("GEOM_SKETCHER_DY2"));
+ initSpinBox( Group2Spin->SpinBox_DX, COORD_MIN, COORD_MAX, step, 3 ); // VSR: TODO: DBL_DIGITS_DISPLAY
+ initSpinBox( Group2Spin->SpinBox_DY, COORD_MIN, COORD_MAX, step, 3 ); // VSR: TODO: DBL_DIGITS_DISPLAY
+ Group2Spin->TextLabel1->setText( tr( "GEOM_SKETCHER_DX2" ) );
+ Group2Spin->TextLabel2->setText( tr( "GEOM_SKETCHER_DY2" ) );
myDX = 0.0;
- Group2Spin->SpinBox_DX->SetValue(myDX);
+ Group2Spin->SpinBox_DX->setValue( myDX );
myDY = 0.0;
- Group2Spin->SpinBox_DY->SetValue(myDY);
+ Group2Spin->SpinBox_DY->setValue( myDY );
Group2Spin->show();
Group2Spin->buttonApply->setFocus();
- GEOMBase_Helper::displayPreview();
+ GEOMBase_Helper::displayPreview( false, true, true, myLineWidth );
}
- else if ( constructorId == 2 )
- { // Selection
+ else if ( constructorId == 2 ) { // Selection
mySketchType = PT_SEL;
myEditCurrentArgument = Group1Sel->LineEdit1;
- connect(((SalomeApp_Application*)(SUIT_Session::session()->activeApplication()))->selectionMgr(),
- SIGNAL(currentSelectionChanged()), this, SLOT(SelectionIntoArgument())) ;
+ connect( myGeometryGUI->getApp()->selectionMgr(),
+ SIGNAL( currentSelectionChanged() ), this, SLOT( SelectionIntoArgument() ) );
Group1Sel->show();
Group1Sel->buttonApply->setFocus();
SelectionIntoArgument();
// function : Dir1Clicked()
// purpose : Radio button management
//=================================================================================
-void EntityGUI_SketcherDlg::Dir1Clicked(int constructorId)
+void EntityGUI_SketcherDlg::Dir1Clicked( int constructorId )
{
myConstructorDirId = constructorId;
- GroupD2->RB_Dir21->setChecked(true);
- Dir2Clicked(2);
+ GroupD2->RB_Dir21->setChecked( true );
+ Dir2Clicked( 2 );
}
// function : Dir2Clicked()
// purpose : Radio button management
//=================================================================================
-void EntityGUI_SketcherDlg::Dir2Clicked(int constructorId)
+void EntityGUI_SketcherDlg::Dir2Clicked( int constructorId )
{
InitClick();
myAngle = 0.0;
- if ( myConstructorId == 0 )
- { // SEGMENT
+ // Get setting of step value from file configuration
+ double step = SUIT_Session::session()->resourceMgr()->doubleValue( "Geometry", "SettingsGeomStep", 100.0 );
+
+ if ( myConstructorId == 0 ) { // SEGMENT
myX = 0.0;
myY = 0.0;
myLength = 100.0;
- if ( myConstructorDirId == 2 )
- { // Angle
- Group2Spin->SpinBox_DX->RangeStepAndValidator(-999999.999, 999999.999, 5., 3);
- Group2Spin->SpinBox_DY->RangeStepAndValidator(-999999.999, 999999.999, 100., 3);
- Group2Spin->TextLabel1->setText(tr("GEOM_SKETCHER_ANGLE2"));
- Group2Spin->SpinBox_DX->SetValue(myAngle);
+ if ( myConstructorDirId == 2 ) { // Angle
+ initSpinBox( Group2Spin->SpinBox_DX, COORD_MIN, COORD_MAX, 5., 3 ); // VSR: TODO: DBL_DIGITS_DISPLAY
+ initSpinBox( Group2Spin->SpinBox_DY, COORD_MIN, COORD_MAX, step, 3 ); // VSR: TODO: DBL_DIGITS_DISPLAY
+ Group2Spin->TextLabel1->setText( tr( "GEOM_SKETCHER_ANGLE2" ) );
+ Group2Spin->SpinBox_DX->setValue( myAngle );
Group2Spin->buttonApply->setFocus();
Group2Spin->show();
- if ( constructorId == 2 )
- { // Length
- mySketchType = DIR_ANGLE_LENGTH;
- Group2Spin->TextLabel2->setText(tr("GEOM_SKETCHER_LENGTH2"));
- Group2Spin->SpinBox_DY->SetValue(myLength);
+ if ( constructorId == 2 ) { // Length
+ mySketchType = DIR_ANGLE_LENGTH;
+ Group2Spin->TextLabel2->setText( tr( "GEOM_SKETCHER_LENGTH2" ) );
+ Group2Spin->SpinBox_DY->setValue( myLength );
}
- else if ( constructorId == 0 )
- { // X
- mySketchType = DIR_ANGLE_X;
- Group2Spin->TextLabel2->setText(tr("GEOM_SKETCHER_X3"));
- Group2Spin->SpinBox_DY->SetValue(myX);
+ else if ( constructorId == 0 ) { // X
+ mySketchType = DIR_ANGLE_X;
+ Group2Spin->TextLabel2->setText( tr( "GEOM_SKETCHER_X3" ) );
+ Group2Spin->SpinBox_DY->setValue( myX );
}
- else if ( constructorId == 1 )
- { // Y
- mySketchType = DIR_ANGLE_Y;
- Group2Spin->TextLabel2->setText(tr("GEOM_SKETCHER_Y3"));
- Group2Spin->SpinBox_DY->SetValue(myY);
+ else if ( constructorId == 1 ) { // Y
+ mySketchType = DIR_ANGLE_Y;
+ Group2Spin->TextLabel2->setText( tr( "GEOM_SKETCHER_Y3" ) );
+ Group2Spin->SpinBox_DY->setValue( myY );
}
- }
- else if ( myConstructorDirId == 0 )
- { // Perpendicular
+ }
+ else if ( myConstructorDirId == 0 ) { // Perpendicular
Group1Spin->show();
Group1Spin->buttonApply->setFocus();
- if ( constructorId == 2 )
- { // Length
- mySketchType = DIR_PER_LENGTH;
- Group1Spin->TextLabel1->setText(tr("GEOM_SKETCHER_LENGTH2"));
- Group1Spin->SpinBox_DX->SetValue(myLength);
+ if ( constructorId == 2 ) { // Length
+ mySketchType = DIR_PER_LENGTH;
+ Group1Spin->TextLabel1->setText( tr( "GEOM_SKETCHER_LENGTH2" ) );
+ Group1Spin->SpinBox_DX->setValue( myLength );
}
- else if ( constructorId == 0 )
- { // X
- mySketchType = DIR_PER_X;
- Group1Spin->TextLabel1->setText(tr("GEOM_SKETCHER_X3"));
- Group1Spin->SpinBox_DX->SetValue(myX);
+ else if ( constructorId == 0 ) { // X
+ mySketchType = DIR_PER_X;
+ Group1Spin->TextLabel1->setText( tr( "GEOM_SKETCHER_X3" ) );
+ Group1Spin->SpinBox_DX->setValue( myX );
}
- else if ( constructorId == 1 )
- { // Y
- mySketchType = DIR_PER_Y;
- Group1Spin->TextLabel1->setText(tr("GEOM_SKETCHER_Y3"));
- Group1Spin->SpinBox_DX->SetValue(myY);
+ else if ( constructorId == 1 ) { // Y
+ mySketchType = DIR_PER_Y;
+ Group1Spin->TextLabel1->setText( tr( "GEOM_SKETCHER_Y3" ) );
+ Group1Spin->SpinBox_DX->setValue( myY );
}
}
- else if ( myConstructorDirId == 1 )
- { // Tangent
+ else if ( myConstructorDirId == 1 ) { // Tangent
Group1Spin->show();
Group1Spin->buttonApply->setFocus();
- if ( constructorId == 2 )
- { // Length
- mySketchType = DIR_TAN_LENGTH;
- Group1Spin->TextLabel1->setText(tr("GEOM_SKETCHER_LENGTH2"));
- Group1Spin->SpinBox_DX->SetValue(myLength);
+ if ( constructorId == 2 ) { // Length
+ mySketchType = DIR_TAN_LENGTH;
+ Group1Spin->TextLabel1->setText( tr( "GEOM_SKETCHER_LENGTH2" ) );
+ Group1Spin->SpinBox_DX->setValue( myLength );
}
- else if ( constructorId == 0 )
- { // X
- mySketchType = DIR_TAN_X;
- Group1Spin->TextLabel1->setText(tr("GEOM_SKETCHER_X3"));
- Group1Spin->SpinBox_DX->SetValue(myX);
+ else if ( constructorId == 0 ) { // X
+ mySketchType = DIR_TAN_X;
+ Group1Spin->TextLabel1->setText( tr( "GEOM_SKETCHER_X3" ) );
+ Group1Spin->SpinBox_DX->setValue( myX );
}
- else if ( constructorId == 1 )
- { // Y
- mySketchType = DIR_TAN_Y;
- Group1Spin->TextLabel1->setText(tr("GEOM_SKETCHER_Y3"));
- Group1Spin->SpinBox_DX->SetValue(myY);
+ else if ( constructorId == 1 ) { // Y
+ mySketchType = DIR_TAN_Y;
+ Group1Spin->TextLabel1->setText( tr( "GEOM_SKETCHER_Y3" ) );
+ Group1Spin->SpinBox_DX->setValue( myY );
}
}
- else if ( myConstructorDirId == 3 )
- { // DXDY
- Group3Spin->SpinBox_DX->RangeStepAndValidator(-999999.999, 999999.999, 0.1, 3);
- Group3Spin->SpinBox_DY->RangeStepAndValidator(-999999.999, 999999.999, 0.1, 3);
- Group3Spin->SpinBox_DZ->RangeStepAndValidator(-999999.999, 999999.999, 100., 3);
- Group3Spin->TextLabel1->setText(tr("GEOM_SKETCHER_VX2"));
- Group3Spin->TextLabel2->setText(tr("GEOM_SKETCHER_VY2"));
+ else if ( myConstructorDirId == 3 ) { // DXDY
+ initSpinBox( Group3Spin->SpinBox_DX, COORD_MIN, COORD_MAX, 0.1, 3 ); // VSR: TODO: DBL_DIGITS_DISPLAY
+ initSpinBox( Group3Spin->SpinBox_DY, COORD_MIN, COORD_MAX, 0.1, 3 ); // VSR: TODO: DBL_DIGITS_DISPLAY
+ initSpinBox( Group3Spin->SpinBox_DZ, COORD_MIN, COORD_MAX, step, 3 ); // VSR: TODO: DBL_DIGITS_DISPLAY
+ Group3Spin->TextLabel1->setText( tr( "GEOM_SKETCHER_VX2" ) );
+ Group3Spin->TextLabel2->setText( tr( "GEOM_SKETCHER_VY2" ) );
myDX = 0.0;
- Group3Spin->SpinBox_DX->SetValue(myDX);
+ Group3Spin->SpinBox_DX->setValue( myDX );
myDY = 0.0;
- Group3Spin->SpinBox_DY->SetValue(myDY);
+ Group3Spin->SpinBox_DY->setValue( myDY );
Group3Spin->show();
Group3Spin->buttonApply->setFocus();
- if ( constructorId == 2 )
- { // Length
- mySketchType = DIR_DXDY_LENGTH;
- Group3Spin->TextLabel3->setText(tr("GEOM_SKETCHER_LENGTH2"));
- Group3Spin->SpinBox_DZ->SetValue(myLength);
+ if ( constructorId == 2 ) { // Length
+ mySketchType = DIR_DXDY_LENGTH;
+ Group3Spin->TextLabel3->setText( tr( "GEOM_SKETCHER_LENGTH2" ) );
+ Group3Spin->SpinBox_DZ->setValue( myLength );
}
- else if ( constructorId == 0 )
- { // X
- mySketchType = DIR_DXDY_X;
- Group3Spin->TextLabel3->setText(tr("GEOM_SKETCHER_X3"));
- Group3Spin->SpinBox_DZ->SetValue(myX);
+ else if ( constructorId == 0 ) { // X
+ mySketchType = DIR_DXDY_X;
+ Group3Spin->TextLabel3->setText( tr( "GEOM_SKETCHER_X3" ) );
+ Group3Spin->SpinBox_DZ->setValue( myX );
}
- else if ( constructorId == 1 )
- { // Y
- mySketchType = DIR_DXDY_Y;
- Group3Spin->TextLabel3->setText(tr("GEOM_SKETCHER_Y3"));
- Group3Spin->SpinBox_DZ->SetValue(myY);
+ else if ( constructorId == 1 ) { // Y
+ mySketchType = DIR_DXDY_Y;
+ Group3Spin->TextLabel3->setText( tr( "GEOM_SKETCHER_Y3" ) );
+ Group3Spin->SpinBox_DZ->setValue( myY );
}
}
}
- else if ( myConstructorId == 1 )
- { // ARC
- if ( myConstructorDirId == 2 )
- { // Angle
- if ( constructorId == 2 )
- { // Length
- mySketchType = DIR_ANGLE_LENGTH;
- Group3Spin->SpinBox_DX->RangeStepAndValidator(-999999.999, 999999.999, 5., 3);
- Group3Spin->SpinBox_DY->RangeStepAndValidator(-999999.999, 999999.999, 100., 3);
- Group3Spin->SpinBox_DZ->RangeStepAndValidator(-999999.999, 999999.999, 5., 3);
- Group3Spin->TextLabel1->setText(tr("GEOM_SKETCHER_ANGLE2"));
- Group3Spin->TextLabel2->setText(tr("GEOM_SKETCHER_RADIUS2"));
- Group3Spin->TextLabel3->setText(tr("GEOM_SKETCHER_ANGLE2"));
- Group3Spin->SpinBox_DX->SetValue(myAngle);
- myRadius = 100.0;
- Group3Spin->SpinBox_DY->SetValue(myRadius);
- myLength = 30.0;
- Group3Spin->SpinBox_DZ->SetValue(myLength);
- Group3Spin->show();
- Group3Spin->buttonApply->setFocus();
+ else if ( myConstructorId == 1 ) { // ARC
+ if ( myConstructorDirId == 2 ) { // Angle
+ if ( constructorId == 2 ) { // Length
+ mySketchType = DIR_ANGLE_LENGTH;
+ initSpinBox( Group3Spin->SpinBox_DX, COORD_MIN, COORD_MAX, 5., 3 ); // VSR: TODO: DBL_DIGITS_DISPLAY
+ initSpinBox( Group3Spin->SpinBox_DY, COORD_MIN, COORD_MAX, step, 3 ); // VSR: TODO: DBL_DIGITS_DISPLAY
+ initSpinBox( Group3Spin->SpinBox_DZ, COORD_MIN, COORD_MAX, 5., 3 ); // VSR: TODO: DBL_DIGITS_DISPLAY
+ Group3Spin->TextLabel1->setText( tr( "GEOM_SKETCHER_ANGLE2" ) );
+ Group3Spin->TextLabel2->setText( tr( "GEOM_SKETCHER_RADIUS2" ) );
+ Group3Spin->TextLabel3->setText( tr( "GEOM_SKETCHER_ANGLE2" ));
+ Group3Spin->SpinBox_DX->setValue( myAngle );
+ myRadius = 100.0;
+ Group3Spin->SpinBox_DY->setValue( myRadius );
+ myLength = 30.0;
+ Group3Spin->SpinBox_DZ->setValue( myLength );
+ Group3Spin->show();
+ Group3Spin->buttonApply->setFocus();
}
}
- else if ( myConstructorDirId == 0 )
- { // Perpendicular
- if ( constructorId == 2 )
- { // Length
- mySketchType = DIR_PER_LENGTH;
- Group2Spin->SpinBox_DY->RangeStepAndValidator(-999999.999, 999999.999, 100., 3);
- Group2Spin->SpinBox_DY->RangeStepAndValidator(-999999.999, 999999.999, 5., 3);
- Group2Spin->TextLabel1->setText(tr("GEOM_SKETCHER_RADIUS2"));
- Group2Spin->TextLabel2->setText(tr("GEOM_SKETCHER_ANGLE2"));
- myRadius = 100.0;
- Group2Spin->SpinBox_DX->SetValue(myRadius);
- myLength = 30.0;
- Group2Spin->SpinBox_DY->SetValue(myLength);
- Group2Spin->show();
- Group2Spin->buttonApply->setFocus();
+ else if ( myConstructorDirId == 0 ) { // Perpendicular
+ if ( constructorId == 2 ) { // Length
+ mySketchType = DIR_PER_LENGTH;
+ initSpinBox( Group2Spin->SpinBox_DY, COORD_MIN, COORD_MAX, step, 3 ); // VSR: TODO: DBL_DIGITS_DISPLAY
+ initSpinBox( Group2Spin->SpinBox_DY, COORD_MIN, COORD_MAX, 5., 3 ); // VSR: TODO: DBL_DIGITS_DISPLAY
+ Group2Spin->TextLabel1->setText( tr( "GEOM_SKETCHER_RADIUS2" ) );
+ Group2Spin->TextLabel2->setText( tr( "GEOM_SKETCHER_ANGLE2" ) );
+ myRadius = 100.0;
+ Group2Spin->SpinBox_DX->setValue( myRadius );
+ myLength = 30.0;
+ Group2Spin->SpinBox_DY->setValue( myLength );
+ Group2Spin->show();
+ Group2Spin->buttonApply->setFocus();
}
}
- else if ( myConstructorDirId == 1 )
- { // Tangent
- if ( constructorId == 2 )
- { // Length
- mySketchType = DIR_TAN_LENGTH;
- Group2Spin->SpinBox_DY->RangeStepAndValidator(-999999.999, 999999.999, 100., 3);
- Group2Spin->SpinBox_DY->RangeStepAndValidator(-999999.999, 999999.999, 5., 3);
- Group2Spin->TextLabel1->setText(tr("GEOM_SKETCHER_RADIUS2"));
- Group2Spin->TextLabel2->setText(tr("GEOM_SKETCHER_ANGLE2"));
- myRadius = 100.0;
- Group2Spin->SpinBox_DX->SetValue(myRadius);
- myLength = 30.0;
- Group2Spin->SpinBox_DY->SetValue(myLength);
- Group2Spin->show();
- Group2Spin->buttonApply->setFocus();
+ else if ( myConstructorDirId == 1 ) { // Tangent
+ if ( constructorId == 2 ) { // Length
+ mySketchType = DIR_TAN_LENGTH;
+ initSpinBox( Group2Spin->SpinBox_DY, COORD_MIN, COORD_MAX, step, 3 ); // VSR: TODO: DBL_DIGITS_DISPLAY
+ initSpinBox( Group2Spin->SpinBox_DY, COORD_MIN, COORD_MAX, 5., 3 ); // VSR: TODO: DBL_DIGITS_DISPLAY
+ Group2Spin->TextLabel1->setText( tr( "GEOM_SKETCHER_RADIUS2" ) );
+ Group2Spin->TextLabel2->setText( tr( "GEOM_SKETCHER_ANGLE2" ) );
+ myRadius = 100.0;
+ Group2Spin->SpinBox_DX->setValue( myRadius );
+ myLength = 30.0;
+ Group2Spin->SpinBox_DY->setValue( myLength );
+ Group2Spin->show();
+ Group2Spin->buttonApply->setFocus();
}
}
- else if ( myConstructorDirId == 3 )
- { // DXDY
- if ( constructorId == 2 )
- { // Length
- mySketchType = DIR_DXDY_LENGTH;
- Group4Spin->TextLabel1->setText(tr("GEOM_SKETCHER_VX2"));
- Group4Spin->TextLabel2->setText(tr("GEOM_SKETCHER_VY2"));
- Group4Spin->TextLabel3->setText(tr("GEOM_SKETCHER_RADIUS2"));
- Group4Spin->TextLabel4->setText(tr("GEOM_SKETCHER_ANGLE2"));
- myDX = 0.0;
- Group4Spin->SpinBox_DX->SetValue(myDX);
- myDY = 0.0;
- Group4Spin->SpinBox_DY->SetValue(myDY);
- myRadius = 100.0;
- Group4Spin->SpinBox_DZ->SetValue(myRadius);
- myLength = 30.0;
- Group4Spin->SpinBox_DS->SetValue(myLength);
- Group4Spin->show();
- Group4Spin->buttonApply->setFocus();
+ else if ( myConstructorDirId == 3 ) { // DXDY
+ if ( constructorId == 2 ) { // Length
+ mySketchType = DIR_DXDY_LENGTH;
+ Group4Spin->TextLabel1->setText( tr( "GEOM_SKETCHER_VX2" ) );
+ Group4Spin->TextLabel2->setText( tr( "GEOM_SKETCHER_VY2" ) );
+ Group4Spin->TextLabel3->setText( tr( "GEOM_SKETCHER_RADIUS2" ) );
+ Group4Spin->TextLabel4->setText( tr( "GEOM_SKETCHER_ANGLE2" ) );
+ myDX = 0.0;
+ Group4Spin->SpinBox_DX->setValue( myDX );
+ myDY = 0.0;
+ Group4Spin->SpinBox_DY->setValue( myDY );
+ myRadius = 100.0;
+ Group4Spin->SpinBox_DZ->setValue( myRadius );
+ myLength = 30.0;
+ Group4Spin->SpinBox_DS->setValue( myLength );
+ Group4Spin->show();
+ Group4Spin->buttonApply->setFocus();
}
}
}
- GEOMBase_Helper::displayPreview();
+ GEOMBase_Helper::displayPreview( false, true, true, myLineWidth );
}
//=================================================================================
void EntityGUI_SketcherDlg::ClickOnEnd()
{
- if ( sender() == buttonClose )
- {
+ if ( sender() == MainWidget->buttonClose ) {
// Verify validity of commands
- if ( myCommand.count() <= 2 )
- {
- SUIT_MessageBox::error1( SUIT_Session::session()->activeApplication()->desktop(),
- tr( "GEOM_ERROR_STATUS" ), tr( "CANNOT_CLOSE" ), tr( "BUT_OK" ) );
+ if ( myCommand.count() <= 2 ) {
+ SUIT_MessageBox::critical( SUIT_Session::session()->activeApplication()->desktop(),
+ tr( "GEOM_ERROR_STATUS" ), tr( "CANNOT_CLOSE" ), tr( "BUT_OK" ) );
return;
}
-
- QString Command = myCommand.join( "" ) + GetNewCommand();
- Sketcher_Profile aProfile (Command.ascii());
+
+ QString Parameters;
+ QString Command = myCommand.join( "" ) + GetNewCommand( Parameters );
+ Sketcher_Profile aProfile( Command.toAscii() );
Command = myCommand.join( "" );
- aProfile = Sketcher_Profile(Command.ascii());
+ aProfile = Sketcher_Profile( Command.toAscii() );
TopoDS_Shape myShape;
if ( aProfile.IsDone() )
myShape = aProfile.GetShape();
-
- if(myShape.ShapeType() != TopAbs_VERTEX)
+
+ if ( myShape.ShapeType() != TopAbs_VERTEX )
myCommand.append( ":WW" );
}
- else
+ else {
+ // PAL16008 (Sketcher Validation should be equal to Apply&Close)
+ if ( Group1Spin->buttonApply->isEnabled() && Group1Spin->isVisible() ||
+ Group2Spin->buttonApply->isEnabled() && Group2Spin->isVisible() ||
+ Group3Spin->buttonApply->isEnabled() && Group3Spin->isVisible() ||
+ Group4Spin->buttonApply->isEnabled() && Group4Spin->isVisible() ||
+ Group1Sel ->buttonApply->isEnabled() && Group1Sel->isVisible() ) {
+ ClickOnApply();
+ }
myIsAllAdded = true;
+ }
- if( myCommand.size() > 2 )
- if( !onAccept() )
+ if ( myCommand.size() > 2 )
+ if ( !onAccept() )
return;
close();
//=================================================================================
bool EntityGUI_SketcherDlg::ClickOnApply()
{
- myCommand.append( GetNewCommand() );
+ if ( sender() && sender()->inherits( "QPushButton" ) )
+ ( (QPushButton*)sender() )->setFocus(); // to update value of currently edited spin-box (PAL11948)
+
+ QString aParameters;
+ myCommand.append( GetNewCommand( aParameters ) );
mySketchState = NEXT_POINT;
myUndoCommand.clear();
myUndoCommand.append( "Sketcher" );
- GroupConstructors->setEnabled(true);
- GroupDest1->setEnabled(true);
- setEnabledUndo(true);
- setEnabledRedo(false);
+ myParameters.append( aParameters );
+ myUndoParameters.clear();
+
+ MainWidget->GroupConstructors->setEnabled( true );
+ MainWidget->GroupDest1->setEnabled( true );
+ setEnabledUndo( true );
+ setEnabledRedo( false );
+
+ myIsApply = true;
+ GEOMBase_Helper::displayPreview( false, true, true, myLineWidth );
+ myIsApply = false;
- GEOMBase_Helper::displayPreview();
+ // Set focus to SpinBox_DX
+ if ( sender() == Group1Spin->buttonApply ) {
+ (Group1Spin->SpinBox_DX)->setFocus();
+ (Group1Spin->SpinBox_DX)->selectAll();
+ }
+ else if ( sender() == Group2Spin->buttonApply ) {
+ (Group2Spin->SpinBox_DX)->setFocus();
+ (Group2Spin->SpinBox_DX)->selectAll();
+ }
+ else if ( sender() == Group3Spin->buttonApply ) {
+ (Group3Spin->SpinBox_DX)->setFocus();
+ (Group3Spin->SpinBox_DX)->selectAll();
+ }
+ else if ( sender() == Group4Spin->buttonApply ) {
+ (Group4Spin->SpinBox_DX)->setFocus();
+ (Group4Spin->SpinBox_DX)->selectAll();
+ }
return true;
}
+//=================================================================================
+// function : ClickOnHelp()
+// purpose :
+//=================================================================================
+void EntityGUI_SketcherDlg::ClickOnHelp()
+{
+ LightApp_Application* app = (LightApp_Application*)( SUIT_Session::session()->activeApplication() );
+ if ( app )
+ app->onHelpContextModule( myGeometryGUI ? app->moduleName( myGeometryGUI->moduleName() ) : QString( "" ), myHelpFileName );
+ else {
+ QString platform;
+#ifdef WIN32
+ platform = "winapplication";
+#else
+ platform = "application";
+#endif
+
+ SUIT_MessageBox::warning( 0, QObject::tr( "WRN_WARNING" ),
+ QObject::tr( "EXTERNAL_BROWSER_CANNOT_SHOW_PAGE" ).
+ arg( app->resourceMgr()->stringValue( "ExternalBrowser", platform ) ).arg( myHelpFileName ),
+ QObject::tr( "BUT_OK" ) );
+ }
+}
+
//=================================================================================
// function : ClickOnUndo()
// purpose :
myUndoCommand.append( myCommand.last() );
myCommand.pop_back();
- if(myCommand.count() == 1) {
+ myUndoParameters.append( myParameters.last() );
+ myParameters.pop_back();
+
+ if ( myCommand.count() == 1 ) {
mySketchState = FIRST_POINT;
-
- RadioButton1->setChecked(true);
- TypeClicked(0);
- GroupConstructors->setEnabled(false);
- GroupDest1->setEnabled(false);
- setEnabledUndo(false);
+ MainWidget->RadioButton1->setChecked( true );
+ TypeClicked( 0 );
+
+ MainWidget->GroupConstructors->setEnabled( false );
+ MainWidget->GroupDest1->setEnabled( false );
+ setEnabledUndo( false );
}
- setEnabledRedo(true);
+ setEnabledRedo( true );
- GEOMBase_Helper::displayPreview();
+ GEOMBase_Helper::displayPreview( false, true, true, myLineWidth );
}
//=================================================================================
myCommand.append( myUndoCommand.last() );
myUndoCommand.pop_back();
+ myParameters.append( myUndoParameters.last() );
+ myUndoParameters.pop_back();
+
mySketchState = NEXT_POINT;
- GroupConstructors->setEnabled(true);
- GroupDest1->setEnabled(true);
- setEnabledUndo(true);
+ MainWidget->GroupConstructors->setEnabled( true );
+ MainWidget->GroupDest1->setEnabled( true );
+ setEnabledUndo( true );
- if(myUndoCommand.count() == 1)
- setEnabledRedo(false);
+ if ( myUndoCommand.count() == 1 )
+ setEnabledRedo( false );
- GEOMBase_Helper::displayPreview();
+ GEOMBase_Helper::displayPreview( false, true, true, myLineWidth );
}
//=================================================================================
// function : setEnabledUndo()
// purpose :
//=================================================================================
-void EntityGUI_SketcherDlg::setEnabledUndo(bool value)
+void EntityGUI_SketcherDlg::setEnabledUndo( bool value )
{
- Group1Sel->buttonUndo->setEnabled(value);
- Group1Spin->buttonUndo->setEnabled(value);
- Group2Spin->buttonUndo->setEnabled(value);
- Group3Spin->buttonUndo->setEnabled(value);
- Group4Spin->buttonUndo->setEnabled(value);
+ Group1Sel->buttonUndo->setEnabled( value );
+ Group1Spin->buttonUndo->setEnabled( value );
+ Group2Spin->buttonUndo->setEnabled( value );
+ Group3Spin->buttonUndo->setEnabled( value );
+ Group4Spin->buttonUndo->setEnabled( value );
}
//=================================================================================
// function : setEnabledRedo()
// purpose :
//=================================================================================
-void EntityGUI_SketcherDlg::setEnabledRedo(bool value)
+void EntityGUI_SketcherDlg::setEnabledRedo( bool value )
{
- Group1Sel->buttonRedo->setEnabled(value);
- Group1Spin->buttonRedo->setEnabled(value);
- Group2Spin->buttonRedo->setEnabled(value);
- Group3Spin->buttonRedo->setEnabled(value);
- Group4Spin->buttonRedo->setEnabled(value);
+ Group1Sel->buttonRedo->setEnabled( value );
+ Group1Spin->buttonRedo->setEnabled( value );
+ Group2Spin->buttonRedo->setEnabled( value );
+ Group3Spin->buttonRedo->setEnabled( value );
+ Group4Spin->buttonRedo->setEnabled( value );
}
//=================================================================================
//=================================================================================
void EntityGUI_SketcherDlg::SelectionIntoArgument()
{
- myEditCurrentArgument->setText("");
+ myEditCurrentArgument->setText( "" );
myX = myLastX1;
myY = myLastY1;
- int nbSel = IObjectCount();
- if ( nbSel == 1 && myEditCurrentArgument == Group1Sel->LineEdit1 )
- {
+ LightApp_SelectionMgr* aSelMgr = myGeometryGUI->getApp()->selectionMgr();
+ SALOME_ListIO aSelList;
+ aSelMgr->selectedObjects(aSelList);
+
+ int nbSel = aSelList.Extent();
+ if (nbSel == 1 && myEditCurrentArgument == Group1Sel->LineEdit1) {
Standard_Boolean aRes = Standard_False;
- GEOM::GEOM_Object_var aSelectedObject = GEOMBase::ConvertIOinGEOMObject( firstIObject(), aRes );
- if ( !CORBA::is_nil( aSelectedObject ) && aRes ) {
+ GEOM::GEOM_Object_var aSelectedObject = GEOMBase::ConvertIOinGEOMObject(aSelList.First(), aRes);
+ if (!CORBA::is_nil(aSelectedObject) && aRes) {
TopoDS_Shape aShape;
- if ( GEOMBase::GetShape( aSelectedObject, aShape, TopAbs_VERTEX ) ) {
+ if (GEOMBase::GetShape(aSelectedObject, aShape, TopAbs_VERTEX)) {
gp_Trsf aTrans;
- gp_Ax3 aWPlane = myGeometryGUI->GetWorkingPlane();
+ gp_Ax3 aWPlane = GetActiveLocalCS();
aTrans.SetTransformation(aWPlane);
- BRepBuilderAPI_Transform aTransformation(aShape, aTrans, Standard_False);
+ BRepBuilderAPI_Transform aTransformation (aShape, aTrans, Standard_False);
aShape = aTransformation.Shape();
gp_Pnt aPnt;
}
}
- GEOMBase_Helper::displayPreview();
+ GEOMBase_Helper::displayPreview( false, true, true, myLineWidth );
}
//=================================================================================
void EntityGUI_SketcherDlg::SetEditCurrentArgument()
{
- if ( sender() == Group1Sel->PushButton1 )
- {
+ if ( sender() == Group1Sel->PushButton1 ) {
myEditCurrentArgument = Group1Sel->LineEdit1;
myEditCurrentArgument->setFocus();
}
//=================================================================================
void EntityGUI_SketcherDlg::LineEditReturnPressed()
{
- if ( sender() == Group1Sel->LineEdit1 )
- {
+ if ( sender() == Group1Sel->LineEdit1 ) {
myEditCurrentArgument = Group1Sel->LineEdit1;
- /* User name of object input management */
- /* If successfull the selection is changed and signal emitted... */
- /* so SelectionIntoArgument() is automatically called. */
- const QString objectUserName = myEditCurrentArgument->text();
- QWidget* thisWidget = (QWidget*)this;
- if(GEOMBase::SelectionByNameInDialogs(thisWidget, objectUserName, selectedIO()))
- myEditCurrentArgument->setText(objectUserName);
+ /* User name of object input management */
+ /* If successfull the selection is changed and signal emitted... */
+ /* so SelectionIntoArgument() is automatically called. */
+ const QString objectUserName = myEditCurrentArgument->text();
+ QWidget* thisWidget = (QWidget*)this;
+
+ LightApp_SelectionMgr* aSelMgr = myGeometryGUI->getApp()->selectionMgr();
+ SALOME_ListIO aSelList;
+ aSelMgr->selectedObjects(aSelList);
+
+ if (GEOMBase::SelectionByNameInDialogs(thisWidget, objectUserName, aSelList))
+ myEditCurrentArgument->setText( objectUserName );
}
}
setEnabled( false );
globalSelection();
- disconnect(((SalomeApp_Application*)(SUIT_Session::session()->activeApplication()))->selectionMgr(), 0, this, 0);
- myGeometryGUI->SetActiveDialogBox(0);
+ disconnect( myGeometryGUI->getApp()->selectionMgr(), 0, this, 0 );
+ myGeometryGUI->SetActiveDialogBox( 0 );
}
void EntityGUI_SketcherDlg::ActivateThisDialog()
{
myGeometryGUI->EmitSignalDeactivateDialog();
- setEnabled(true);
- myGeometryGUI->SetActiveDialogBox((QDialog*)this);
+ setEnabled( true );
+ myGeometryGUI->SetActiveDialogBox( this );
- connect(((SalomeApp_Application*)(SUIT_Session::session()->activeApplication()))->selectionMgr(),
- SIGNAL(currentSelectionChanged()), this, SLOT(SelectionIntoArgument())) ;
+ connect( myGeometryGUI->getApp()->selectionMgr(),
+ SIGNAL( currentSelectionChanged() ), this, SLOT( SelectionIntoArgument() ) );
//myGeometryGUI->SetState( 0 );
globalSelection( GEOM_POINT );
myEditCurrentArgument = Group1Sel->LineEdit1;
myEditCurrentArgument->setFocus();
- GEOMBase_Helper::displayPreview();
+ GEOMBase_Helper::displayPreview( false, true, true, myLineWidth );
}
// function : enterEvent [REDEFINED]
// purpose :
//=================================================================================
-void EntityGUI_SketcherDlg::enterEvent(QEvent* e)
+void EntityGUI_SketcherDlg::enterEvent( QEvent* )
{
- if ( !GroupConstructors->isEnabled())
+ if ( !MainWidget->GroupConstructors->isEnabled() )
ActivateThisDialog();
}
// function : closeEvent()
// purpose :
//=================================================================================
-void EntityGUI_SketcherDlg::closeEvent(QCloseEvent* e)
+void EntityGUI_SketcherDlg::closeEvent( QCloseEvent* e )
{
//myGeometryGUI->SetState( -1 );
- disconnect(((SalomeApp_Application*)(SUIT_Session::session()->activeApplication()))->selectionMgr(), 0, this, 0);
+ disconnect( myGeometryGUI->getApp()->selectionMgr(), 0, this, 0 );
+ myGeometryGUI->getApp()->updateActions();
QDialog::closeEvent( e );
}
// function : ValueChangedInSpinBox()
// purpose :
//=================================================================================
-void EntityGUI_SketcherDlg::ValueChangedInSpinBox(double newValue)
+void EntityGUI_SketcherDlg::ValueChangedInSpinBox( double newValue )
{
QObject* send = (QObject*)sender();
Standard_Real vx, vy, vz, vs;
vx = vy = vz = vs = 0.0;
- if ( send == Group1Spin->SpinBox_DX)
- {
- vx = newValue;
+ QString vxStr, vyStr, vzStr, vsStr;
+
+ QString newValueStr;
+ if( SalomeApp_DoubleSpinBox* aDoubleSpinBox = (SalomeApp_DoubleSpinBox*)send )
+ newValueStr = aDoubleSpinBox->text();
+
+ if ( send == Group1Spin->SpinBox_DX ) {
+ vx = newValue; vxStr = newValueStr;
}
- else if ( send == Group2Spin->SpinBox_DX )
- {
- vx = newValue;
- vy = Group2Spin->SpinBox_DY->GetValue();
+ else if ( send == Group2Spin->SpinBox_DX ) {
+ vx = newValue; vxStr = newValueStr;
+ vy = Group2Spin->SpinBox_DY->value(); vyStr = Group2Spin->SpinBox_DY->text();
}
- else if ( send == Group2Spin->SpinBox_DY)
- {
- vx = Group2Spin->SpinBox_DX->GetValue();
- vy = newValue;
+ else if ( send == Group2Spin->SpinBox_DY ) {
+ vx = Group2Spin->SpinBox_DX->value(); vxStr = Group2Spin->SpinBox_DX->text();
+ vy = newValue; vyStr = newValueStr;
}
- else if ( send == Group3Spin->SpinBox_DX)
- {
- vx = newValue;
- vy = Group3Spin->SpinBox_DY->GetValue();
- vz = Group3Spin->SpinBox_DZ->GetValue();
+ else if ( send == Group3Spin->SpinBox_DX ) {
+ vx = newValue; vxStr = newValueStr;
+ vy = Group3Spin->SpinBox_DY->value(); vyStr = Group3Spin->SpinBox_DY->text();
+ vz = Group3Spin->SpinBox_DZ->value(); vzStr = Group3Spin->SpinBox_DZ->text();
}
- else if ( send == Group3Spin->SpinBox_DY)
- {
- vx = Group3Spin->SpinBox_DX->GetValue();
- vy = newValue;
- vz = Group3Spin->SpinBox_DZ->GetValue();
+ else if ( send == Group3Spin->SpinBox_DY ) {
+ vx = Group3Spin->SpinBox_DX->value(); vxStr = Group3Spin->SpinBox_DX->text();
+ vy = newValue; vyStr = newValueStr;
+ vz = Group3Spin->SpinBox_DZ->value(); vzStr = Group3Spin->SpinBox_DZ->text();
}
- else if ( send == Group3Spin->SpinBox_DZ)
- {
- vx = Group3Spin->SpinBox_DX->GetValue();
- vy = Group3Spin->SpinBox_DY->GetValue();
- vz = newValue;
+ else if ( send == Group3Spin->SpinBox_DZ ) {
+ vx = Group3Spin->SpinBox_DX->value(); vxStr = Group3Spin->SpinBox_DX->text();
+ vy = Group3Spin->SpinBox_DY->value(); vyStr = Group3Spin->SpinBox_DY->text();
+ vz = newValue; vzStr = newValueStr;
}
- else if ( send == Group4Spin->SpinBox_DX)
- {
- vx = newValue;
- vy = Group4Spin->SpinBox_DY->GetValue();
- vz = Group4Spin->SpinBox_DZ->GetValue();
- vs = Group4Spin->SpinBox_DS->GetValue();
+ else if ( send == Group4Spin->SpinBox_DX ) {
+ vx = newValue; vxStr = newValueStr;
+ vy = Group4Spin->SpinBox_DY->value(); vyStr = Group4Spin->SpinBox_DY->text();
+ vz = Group4Spin->SpinBox_DZ->value(); vzStr = Group4Spin->SpinBox_DZ->text();
+ vs = Group4Spin->SpinBox_DS->value(); vsStr = Group4Spin->SpinBox_DS->text();
}
- else if ( send == Group4Spin->SpinBox_DY)
- {
- vx = Group4Spin->SpinBox_DX->GetValue();
- vy = newValue;
- vz = Group4Spin->SpinBox_DZ->GetValue();
- vs = Group4Spin->SpinBox_DS->GetValue();
+ else if ( send == Group4Spin->SpinBox_DY ) {
+ vx = Group4Spin->SpinBox_DX->value(); vxStr = Group4Spin->SpinBox_DX->text();
+ vy = newValue; vyStr = newValueStr;
+ vz = Group4Spin->SpinBox_DZ->value(); vzStr = Group4Spin->SpinBox_DZ->text();
+ vs = Group4Spin->SpinBox_DS->value(); vsStr = Group4Spin->SpinBox_DS->text();
}
- else if ( send == Group4Spin->SpinBox_DZ)
- {
- vx = Group4Spin->SpinBox_DX->GetValue();
- vy = Group4Spin->SpinBox_DY->GetValue();
- vz = newValue;
- vs = Group4Spin->SpinBox_DS->GetValue();
+ else if ( send == Group4Spin->SpinBox_DZ ) {
+ vx = Group4Spin->SpinBox_DX->value(); vxStr = Group4Spin->SpinBox_DX->text();
+ vy = Group4Spin->SpinBox_DY->value(); vyStr = Group4Spin->SpinBox_DY->text();
+ vz = newValue; vzStr = newValueStr;
+ vs = Group4Spin->SpinBox_DS->value(); vsStr = Group4Spin->SpinBox_DS->text();
}
- else if ( send == Group4Spin->SpinBox_DS)
- {
- vx = Group4Spin->SpinBox_DX->GetValue();
- vy = Group4Spin->SpinBox_DY->GetValue();
- vz = Group4Spin->SpinBox_DZ->GetValue();
- vs = newValue;
+ else if ( send == Group4Spin->SpinBox_DS ) {
+ vx = Group4Spin->SpinBox_DX->value(); vxStr = Group4Spin->SpinBox_DX->text();
+ vy = Group4Spin->SpinBox_DY->value(); vyStr = Group4Spin->SpinBox_DY->text();
+ vz = Group4Spin->SpinBox_DZ->value(); vzStr = Group4Spin->SpinBox_DZ->text();
+ vs = newValue; vsStr = newValueStr;
}
+ // Fix of the NPAL16010 bug is removed, because it's not actual with the Qt-4.x
- if ( myConstructorId == 0 )
- { // SEGMENT
- if ( mySketchType == PT_ABS)
- {
+ if ( myConstructorId == 0 ) { // SEGMENT
+ if ( mySketchType == PT_ABS ) {
myX = vx;
myY = vy;
+ myXStr = vxStr;
+ myYStr = vyStr;
}
- else if ( mySketchType == PT_RELATIVE)
- {
+ else if ( mySketchType == PT_RELATIVE ) {
myDX = vx;
myDY = vy;
+ myDXStr = vxStr;
+ myDYStr = vyStr;
}
- else if ( mySketchType == DIR_ANGLE_LENGTH)
- {
+ else if ( mySketchType == DIR_ANGLE_LENGTH ) {
myAngle = vx;
myLength = vy;
+ myAngleStr = vxStr;
+ myLengthStr = vyStr;
}
- else if ( mySketchType == DIR_ANGLE_X)
- {
+ else if ( mySketchType == DIR_ANGLE_X ) {
myAngle = vx;
myX = vy;
+ myAngleStr = vxStr;
+ myXStr = vyStr;
}
- else if ( mySketchType == DIR_ANGLE_Y)
- {
+ else if ( mySketchType == DIR_ANGLE_Y ) {
myAngle = vx;
myY = vy;
+ myAngleStr = vxStr;
+ myYStr = vyStr;
}
- else if ( mySketchType == DIR_PER_LENGTH)
- {
+ else if ( mySketchType == DIR_PER_LENGTH ) {
myLength = vx;
+ myLengthStr = vxStr;
}
- else if ( mySketchType == DIR_PER_X)
- {
+ else if ( mySketchType == DIR_PER_X ) {
myX = vx;
+ myXStr = vxStr;
}
- else if ( mySketchType == DIR_PER_Y)
- {
+ else if ( mySketchType == DIR_PER_Y ) {
myY = vx;
+ myYStr = vxStr;
}
- else if ( mySketchType == DIR_TAN_LENGTH)
- {
+ else if ( mySketchType == DIR_TAN_LENGTH ) {
myLength = vx;
+ myLengthStr = vxStr;
}
- else if ( mySketchType == DIR_TAN_X)
- {
+ else if ( mySketchType == DIR_TAN_X ) {
myX = vx;
+ myXStr = vxStr;
}
- else if ( mySketchType == DIR_TAN_Y)
- {
+ else if ( mySketchType == DIR_TAN_Y ) {
myY = vx;
+ myYStr = vxStr;
}
- else if ( mySketchType == DIR_DXDY_LENGTH)
- {
+ else if ( mySketchType == DIR_DXDY_LENGTH ) {
myDX = vx;
myDY = vy;
myLength = vz;
+ myDXStr = vxStr;
+ myDYStr = vyStr;
+ myLengthStr = vzStr;
}
- else if ( mySketchType == DIR_DXDY_X)
- {
+ else if ( mySketchType == DIR_DXDY_X ) {
myDX = vx;
myDY = vy;
myX = vz;
+ myDXStr = vxStr;
+ myDYStr = vyStr;
+ myXStr = vzStr;
}
- else if ( mySketchType == DIR_DXDY_Y)
- {
+ else if ( mySketchType == DIR_DXDY_Y ) {
myDX = vx;
myDY = vy;
myY = vz;
+ myDXStr = vxStr;
+ myDYStr = vyStr;
+ myYStr = vzStr;
}
}
- else if ( myConstructorId == 1 )
- { // ARC
- if ( mySketchType == DIR_ANGLE_LENGTH)
- {
+ else if ( myConstructorId == 1 ) { // ARC
+ if ( mySketchType == DIR_ANGLE_LENGTH ) {
myAngle = vx;
myRadius = vy;
myLength = vz;
+ myAngleStr = vxStr;
+ myRadiusStr = vyStr;
+ myLengthStr = vzStr;
}
- else if ( mySketchType == DIR_PER_LENGTH)
- {
+ else if ( mySketchType == DIR_PER_LENGTH ) {
myRadius = vx;
myLength = vy;
+ myRadiusStr = vxStr;
+ myLengthStr = vyStr;
}
- else if ( mySketchType == DIR_TAN_LENGTH)
- {
+ else if ( mySketchType == DIR_TAN_LENGTH ) {
myRadius = vx;
myLength = vy;
+ myRadiusStr = vxStr;
+ myLengthStr = vyStr;
}
- else if ( mySketchType == DIR_DXDY_LENGTH)
- {
+ else if ( mySketchType == DIR_DXDY_LENGTH ) {
myDX = vx;
myDY = vy;
myRadius = vz;
myLength = vs;
+ myDXStr = vxStr;
+ myDYStr = vyStr;
+ myRadiusStr = vzStr;
+ myLengthStr = vsStr;
}
}
- GEOMBase_Helper::displayPreview();
+ GEOMBase_Helper::displayPreview( false, true, true, myLineWidth );
}
// function : GetNewCommand()
// purpose : Build the new command with context
//=================================================================================
-QString EntityGUI_SketcherDlg::GetNewCommand()
+QString EntityGUI_SketcherDlg::GetNewCommand( QString& theParameters )
{
+ theParameters.clear();
QString myNewCommand = ":";
if ( mySketchState == FIRST_POINT ) {
- if ( mySketchType == PT_ABS || mySketchType == PT_SEL)
- myNewCommand = myNewCommand + "F " + QString::number(myX) + " " + QString::number(myY);
- if ( mySketchType == PT_RELATIVE)
- myNewCommand = myNewCommand + "F " + QString::number(myDX) + " " + QString::number(myDY);
+ if ( mySketchType == PT_ABS || mySketchType == PT_SEL ) {
+ myNewCommand = myNewCommand + "F " + QString::number( myX ) + " " + QString::number( myY );
+ theParameters = myXStr + ":" + myYStr;
+ }
+ if ( mySketchType == PT_RELATIVE) {
+ myNewCommand = myNewCommand + "F " + QString::number( myDX ) + " " + QString::number( myDY );
+ theParameters = myDXStr + ":" + myDYStr;
+ }
return myNewCommand;
}
- if ( myConstructorId == 0 )
- { // SEGMENT
- if ( mySketchType == PT_ABS || mySketchType == PT_SEL)
- myNewCommand = myNewCommand + "TT " + QString::number(myX) + " " + QString::number(myY);
- if ( mySketchType == PT_RELATIVE)
- myNewCommand = myNewCommand + "T " + QString::number(myDX) + " " + QString::number(myDY);
- if ( mySketchType == DIR_ANGLE_LENGTH)
- {
- myNewCommand = myNewCommand + "R " + QString::number(myAngle);
- myNewCommand = myNewCommand + ":" + "L " + QString::number(myLength);
- }
- if ( mySketchType == DIR_ANGLE_X)
- {
- myNewCommand = myNewCommand + "R " + QString::number(myAngle);
- myNewCommand = myNewCommand + ":" + "IX " + QString::number(myX);
- }
- if ( mySketchType == DIR_ANGLE_Y)
- {
- myNewCommand = myNewCommand + "R " + QString::number(myAngle);
- myNewCommand = myNewCommand + ":" + "IY " + QString::number(myY);
- }
- if ( mySketchType == DIR_PER_LENGTH)
- {
- myNewCommand = myNewCommand + "R " + QString::number(90.0);
- myNewCommand = myNewCommand + ":" + "L " + QString::number(myLength);
- }
- if ( mySketchType == DIR_PER_X)
- {
- myNewCommand = myNewCommand + "R " + QString::number(90.0);
- myNewCommand = myNewCommand + ":" + "IX " + QString::number(myX);
- }
- if ( mySketchType == DIR_PER_Y)
- {
- myNewCommand = myNewCommand + "R " + QString::number(90.0);
- myNewCommand = myNewCommand + ":" + "IY " + QString::number(myY);
- }
- if ( mySketchType == DIR_TAN_LENGTH)
- myNewCommand = myNewCommand + "L " + QString::number(myLength);
- if ( mySketchType == DIR_TAN_X)
- myNewCommand = myNewCommand + "IX " + QString::number(myX);
- if ( mySketchType == DIR_TAN_Y)
+ if ( myConstructorId == 0 ) { // SEGMENT
+ if ( mySketchType == PT_ABS || mySketchType == PT_SEL ) {
+ myNewCommand = myNewCommand + "TT " + QString::number( myX ) + " " + QString::number( myY );
+ theParameters = myXStr + ":" + myYStr;
+ }
+ if ( mySketchType == PT_RELATIVE) {
+ myNewCommand = myNewCommand + "T " + QString::number( myDX ) + " " + QString::number( myDY );
+ theParameters = myDXStr + ":" + myDYStr;
+ }
+ if ( mySketchType == DIR_ANGLE_LENGTH ) {
+ myNewCommand = myNewCommand + "R " + QString::number( myAngle );
+ myNewCommand = myNewCommand + ":" + "L " + QString::number( myLength );
+ theParameters = myAngleStr + ":" + myLengthStr;
+ }
+ if ( mySketchType == DIR_ANGLE_X ) {
+ myNewCommand = myNewCommand + "R " + QString::number( myAngle );
+ myNewCommand = myNewCommand + ":" + "IX " + QString::number( myX );
+ theParameters = myAngleStr + ":" + myXStr;
+ }
+ if ( mySketchType == DIR_ANGLE_Y ) {
+ myNewCommand = myNewCommand + "R " + QString::number( myAngle );
+ myNewCommand = myNewCommand + ":" + "IY " + QString::number( myY );
+ theParameters = myAngleStr + ":" + myYStr;
+ }
+ if ( mySketchType == DIR_PER_LENGTH ) {
+ myNewCommand = myNewCommand + "R " + QString::number( 90.0 );
+ myNewCommand = myNewCommand + ":" + "L " + QString::number( myLength );
+ theParameters = QString::number( 90.0 ) + ":" + myLengthStr;
+ }
+ if ( mySketchType == DIR_PER_X ) {
+ myNewCommand = myNewCommand + "R " + QString::number( 90.0 );
+ myNewCommand = myNewCommand + ":" + "IX " + QString::number( myX );
+ theParameters = QString::number( 90.0 ) + ":" + myXStr;
+ }
+ if ( mySketchType == DIR_PER_Y ) {
+ myNewCommand = myNewCommand + "R " + QString::number( 90.0 );
+ myNewCommand = myNewCommand + ":" + "IY " + QString::number( myY );
+ theParameters = QString::number( 90.0 ) + ":" + myYStr;
+ }
+ if ( mySketchType == DIR_TAN_LENGTH ) {
+ myNewCommand = myNewCommand + "L " + QString::number( myLength );
+ theParameters = myLengthStr;
+ }
+ if ( mySketchType == DIR_TAN_X ) {
+ myNewCommand = myNewCommand + "IX " + QString::number( myX );
+ theParameters = myXStr;
+ }
+ if ( mySketchType == DIR_TAN_Y) {
myNewCommand = myNewCommand + "IY " + QString::number(myY);
- if ( mySketchType == DIR_DXDY_LENGTH)
- {
- myNewCommand = myNewCommand + "D " + QString::number(myDX) + " " + QString::number(myDY);
- myNewCommand = myNewCommand + ":" + "L " + QString::number(myLength);
+ theParameters = myYStr;
}
- if ( mySketchType == DIR_DXDY_X)
- {
- myNewCommand = myNewCommand + "D " + QString::number(myDX) + " " + QString::number(myDY);
- myNewCommand = myNewCommand + ":" + "IX " + QString::number(myX);
+ if ( mySketchType == DIR_DXDY_LENGTH ) {
+ myNewCommand = myNewCommand + "D " + QString::number( myDX ) + " " + QString::number( myDY );
+ myNewCommand = myNewCommand + ":" + "L " + QString::number( myLength );
+ theParameters = myDXStr + ":" + myDYStr + ":" + myLengthStr;
}
- if ( mySketchType == DIR_DXDY_Y)
- {
- myNewCommand = myNewCommand + "D " + QString::number(myDX) + " " + QString::number(myDY);
- myNewCommand = myNewCommand + ":" + "IY " + QString::number(myY);
+ if ( mySketchType == DIR_DXDY_X ) {
+ myNewCommand = myNewCommand + "D " + QString::number( myDX ) + " " + QString::number( myDY );
+ myNewCommand = myNewCommand + ":" + "IX " + QString::number( myX );
+ theParameters = myDXStr + ":" + myDYStr + ":" + myXStr;
+ }
+ if ( mySketchType == DIR_DXDY_Y ) {
+ myNewCommand = myNewCommand + "D " + QString::number( myDX ) + " " + QString::number( myDY );
+ myNewCommand = myNewCommand + ":" + "IY " + QString::number( myY );
+ theParameters = myDXStr + ":" + myDYStr + ":" + myYStr;
}
}
- else if ( myConstructorId == 1 )
- { // ARC
- if ( mySketchType == DIR_ANGLE_LENGTH)
- {
- myNewCommand = myNewCommand + "R " + QString::number(myAngle);
- myNewCommand = myNewCommand + ":" + "C " + QString::number(myRadius) + " " + QString::number(myLength);
- }
- if ( mySketchType == DIR_PER_LENGTH)
- {
- myNewCommand = myNewCommand + "R " + QString::number(90.0);
- myNewCommand = myNewCommand + ":" + "C " + QString::number(myRadius) + " " + QString::number(myLength);
- }
- if ( mySketchType == DIR_TAN_LENGTH)
- {
- myNewCommand = myNewCommand + "C " + QString::number(myRadius) + " " + QString::number(myLength);
- }
- if ( mySketchType == DIR_DXDY_LENGTH)
- {
- myNewCommand = myNewCommand + "D " + QString::number(myDX) + " " + QString::number(myDY);
- myNewCommand = myNewCommand + ":" + "C " + QString::number(myRadius) + " " + QString::number(myLength);
+ else if ( myConstructorId == 1 ) { // ARC
+ if ( mySketchType == DIR_ANGLE_LENGTH ) {
+ myNewCommand = myNewCommand + "R " + QString::number( myAngle );
+ myNewCommand = myNewCommand + ":" + "C " + QString::number( myRadius ) + " " + QString::number( myLength );
+ theParameters = myAngleStr + ":" + myRadiusStr + ":" + myLengthStr;
+ }
+ if ( mySketchType == DIR_PER_LENGTH ) {
+ myNewCommand = myNewCommand + "R " + QString::number( 90.0 );
+ myNewCommand = myNewCommand + ":" + "C " + QString::number( myRadius ) + " " + QString::number( myLength );
+ theParameters = QString::number( 90.0 ) + ":" + myRadiusStr + ":" + myLengthStr;
+ }
+ if ( mySketchType == DIR_TAN_LENGTH ) {
+ myNewCommand = myNewCommand + "C " + QString::number( myRadius ) + " " + QString::number( myLength );
+ theParameters = myRadiusStr + ":" + myLengthStr;
+ }
+ if ( mySketchType == DIR_DXDY_LENGTH ) {
+ myNewCommand = myNewCommand + "D " + QString::number( myDX ) + " " + QString::number( myDY );
+ myNewCommand = myNewCommand + ":" + "C " + QString::number( myRadius ) + " " + QString::number( myLength );
+ theParameters = myDXStr + ":" + myDYStr + ":" + myRadiusStr + ":" + myLengthStr;
}
}
return myNewCommand;
//=================================================================================
bool EntityGUI_SketcherDlg::isValid( QString& msg )
{
- return true;
+ bool ok = true;
+ bool toCorrect = !IsPreview() || myIsApply;
+
+ if( Group1Spin->isVisible() ) {
+ ok = Group1Spin->SpinBox_DX->isValid( msg, toCorrect ) && ok;
+ }
+ else if( Group2Spin->isVisible() ) {
+ ok = Group2Spin->SpinBox_DX->isValid( msg, toCorrect ) && ok;
+ ok = Group2Spin->SpinBox_DY->isValid( msg, toCorrect ) && ok;
+ }
+ else if( Group3Spin->isVisible() ) {
+ ok = Group3Spin->SpinBox_DX->isValid( msg, toCorrect ) && ok;
+ ok = Group3Spin->SpinBox_DY->isValid( msg, toCorrect ) && ok;
+ ok = Group3Spin->SpinBox_DZ->isValid( msg, toCorrect ) && ok;
+ }
+ else if( Group4Spin->isVisible() ) {
+ ok = Group4Spin->SpinBox_DX->isValid( msg, toCorrect ) && ok;
+ ok = Group4Spin->SpinBox_DY->isValid( msg, toCorrect ) && ok;
+ ok = Group4Spin->SpinBox_DZ->isValid( msg, toCorrect ) && ok;
+ ok = Group4Spin->SpinBox_DS->isValid( msg, toCorrect ) && ok;
+ }
+
+ if( myIsApply && !ok )
+ showError( msg );
+
+ return ok;
}
//=================================================================================
//=================================================================================
bool EntityGUI_SketcherDlg::execute( ObjectList& objects )
{
- if(mySketchState == FIRST_POINT) {
+ QString aParameters;
+
+ if ( mySketchState == FIRST_POINT ) {
myLastX2 = myX;
myLastY2 = myY;
}
//Last Shape
QString Command1 = myCommand.join( "" );
- Sketcher_Profile aProfile1 (Command1.ascii());
- if(aProfile1.IsDone())
+ Sketcher_Profile aProfile1( Command1.toAscii() );
+ if ( aProfile1.IsDone() )
myShape1 = aProfile1.GetShape();
//Current Shape
- QString Command2 = Command1 + GetNewCommand();
- Sketcher_Profile aProfile2 (Command2.ascii());
- if(aProfile2.IsDone())
+ QString Command2 = Command1 + GetNewCommand( aParameters );
+ Sketcher_Profile aProfile2( Command2.toAscii() );
+ if ( aProfile2.IsDone() )
myShape2 = aProfile2.GetShape();
- if(myShape2.IsNull()) {
+ if ( myShape2.IsNull() ) {
//the current point is the same as the last one
myLastX2 = myLastX1;
myLastY2 = myLastY1;
else {
TopoDS_Vertex V1, V2;
gp_Pnt pt;
- if(myShape1.ShapeType() == TopAbs_VERTEX) {
+ if ( myShape1.ShapeType() == TopAbs_VERTEX ) {
//the last shape is the first point
- pt = BRep_Tool::Pnt(TopoDS::Vertex(myShape1));
+ pt = BRep_Tool::Pnt( TopoDS::Vertex( myShape1 ) );
myLastX1 = pt.X();
myLastY1 = pt.Y();
}
else {
- TopExp::Vertices(TopoDS::Wire(myShape1), V1, V2);
- pt = BRep_Tool::Pnt(V2);
+ TopExp::Vertices( TopoDS::Wire( myShape1 ), V1, V2 );
+ pt = BRep_Tool::Pnt( V2 );
myLastX1 = pt.X();
myLastY1 = pt.Y();
}
- TopExp::Vertices(TopoDS::Wire(myShape2), V1, V2);
- pt = BRep_Tool::Pnt(V2);
+ TopExp::Vertices( TopoDS::Wire( myShape2 ), V1, V2 );
+ pt = BRep_Tool::Pnt( V2 );
myLastX2 = pt.X();
myLastY2 = pt.Y();
}
}
QString cmd;
- if( ( mySketchState != FIRST_POINT && myLastX1 == myLastX2 && myLastY1 == myLastY2 ) || myIsAllAdded ) {
+ if ( ( mySketchState != FIRST_POINT &&
+ myLastX1 == myLastX2 && myLastY1 == myLastY2 ) || myIsAllAdded ) {
cmd = myCommand.join( "" );
if ( Group1Sel->isVisible() ) {
- Group1Sel->buttonApply->setEnabled(false);
- Group1Sel->buttonApply->setFocus();
+ Group1Sel->buttonApply->setEnabled( false );
+ //Group1Sel->buttonApply->setFocus();
}
if ( Group1Spin->isVisible() ) {
- Group1Spin->buttonApply->setEnabled(false);
- Group1Spin->buttonApply->setFocus();
+ Group1Spin->buttonApply->setEnabled( false );
+ //Group1Spin->buttonApply->setFocus();
}
if ( Group2Spin->isVisible() ) {
- Group2Spin->buttonApply->setEnabled(false);
- Group2Spin->buttonApply->setFocus();
+ Group2Spin->buttonApply->setEnabled( false );
+ //Group2Spin->buttonApply->setFocus();
}
if ( Group3Spin->isVisible() ) {
- Group3Spin->buttonApply->setEnabled(false);
- Group3Spin->buttonApply->setFocus();
+ Group3Spin->buttonApply->setEnabled( false );
+ //Group3Spin->buttonApply->setFocus();
}
if ( Group4Spin->isVisible() ) {
- Group4Spin->buttonApply->setEnabled(false);
- Group4Spin->buttonApply->setFocus();
+ Group4Spin->buttonApply->setEnabled( false );
+ //Group4Spin->buttonApply->setFocus();
}
}
else {
- cmd = myCommand.join( "" ) + GetNewCommand();
+ cmd = myCommand.join( "" ) + GetNewCommand( aParameters );
if ( Group1Sel->isVisible() ) {
- Group1Sel->buttonApply->setEnabled(true);
- Group1Sel->buttonApply->setFocus();
+ Group1Sel->buttonApply->setEnabled( true );
+ //Group1Sel->buttonApply->setFocus();
}
if ( Group1Spin->isVisible() ) {
- Group1Spin->buttonApply->setEnabled(true);
- Group1Spin->buttonApply->setFocus();
+ Group1Spin->buttonApply->setEnabled( true );
+ //Group1Spin->buttonApply->setFocus();
}
if ( Group2Spin->isVisible() ) {
- Group2Spin->buttonApply->setEnabled(true);
- Group2Spin->buttonApply->setFocus();
+ Group2Spin->buttonApply->setEnabled( true );
+ //Group2Spin->buttonApply->setFocus();
}
if ( Group3Spin->isVisible() ) {
- Group3Spin->buttonApply->setEnabled(true);
- Group3Spin->buttonApply->setFocus();
+ Group3Spin->buttonApply->setEnabled( true );
+ //Group3Spin->buttonApply->setFocus();
}
if ( Group4Spin->isVisible() ) {
- Group4Spin->buttonApply->setEnabled(true);
- Group4Spin->buttonApply->setFocus();
+ Group4Spin->buttonApply->setEnabled( true );
+ //Group4Spin->buttonApply->setFocus();
}
}
-
- gp_Ax3 myWPlane = myGeometryGUI->GetWorkingPlane();
+
+ gp_Ax3 myWPlane = GetActiveLocalCS();
GEOM::ListOfDouble_var WPlane = new GEOM::ListOfDouble;
- WPlane->length(9);
+ WPlane->length( 9 );
WPlane[0] = myWPlane.Location().X();
WPlane[1] = myWPlane.Location().Y();
WPlane[2] = myWPlane.Location().Z();
WPlane[7] = myWPlane.XDirection().Y();
WPlane[8] = myWPlane.XDirection().Z();
- GEOM::GEOM_Object_var anObj = GEOM::GEOM_ICurvesOperations::_narrow( getOperation() )->MakeSketcher( cmd.latin1(), WPlane );
+ GEOM::GEOM_ICurvesOperations_var anOper = GEOM::GEOM_ICurvesOperations::_narrow(getOperation());
+ GEOM::GEOM_Object_var anObj = anOper->MakeSketcher( cmd.toLatin1().constData(), WPlane );
if ( !anObj->_is_nil() )
+ {
+ if( !IsPreview() ) {
+ QStringList aCurrentParameters = myParameters;
+ aCurrentParameters << aParameters;
+ myNoteBook->setParameters(anObj, aCurrentParameters);
+ }
+
objects.push_back( anObj._retn() );
+ }
return true;
}
const bool append,
const bool activate,
const bool update,
- const double lineWidth )
+ const double lineWidth,
+ const int displayMode,
+ const int color )
{
// Set color for preview shape
getDisplayer()->SetColor( Quantity_NOC_RED );
// set width of displayed shape
- getDisplayer()->SetWidth( lineWidth );
+ getDisplayer()->SetWidth( (lineWidth == -1)?myLineWidth:lineWidth );
// Disable activation of selection
getDisplayer()->SetToActivate( activate );
// Make a reference to GEOM_Object
- getDisplayer()->SetName( myGeometryGUI->getApp()->orb()->object_to_string( object ) );
+ CORBA::String_var objStr = myGeometryGUI->getApp()->orb()->object_to_string( object );
+ getDisplayer()->SetName( objStr.in() );
// Create wire from applayed object
TopoDS_Shape anApplyedWire, aLastSegment;
Group1Spin->isVisible() && !Group1Spin->buttonApply->isEnabled() ||
Group2Spin->isVisible() && !Group2Spin->buttonApply->isEnabled() ||
Group3Spin->isVisible() && !Group3Spin->buttonApply->isEnabled() ||
- Group4Spin->isVisible() && !Group4Spin->buttonApply->isEnabled() )
- {
+ Group4Spin->isVisible() && !Group4Spin->buttonApply->isEnabled() ) {
theApplyedWire = aShape;
return true;
}
BRepBuilderAPI_MakeWire aBuilder;
TopExp_Explorer anExp( aShape, TopAbs_EDGE );
- while( 1 )
- {
+ while ( 1 ) {
TopoDS_Shape anEdge = anExp.Current();
anExp.Next();
if ( anExp.More() ) // i.e. non-last edge
aBuilder.Add( TopoDS::Edge( anEdge ) );
- else
- {
+ else {
theLastSegment = anEdge;
break;
}
return true;
}
+//=================================================================================
+// function : keyPressEvent()
+// purpose :
+//=================================================================================
+void EntityGUI_SketcherDlg::keyPressEvent( QKeyEvent* e )
+{
+ QDialog::keyPressEvent( e );
+ if ( e->isAccepted() )
+ return;
+
+ if ( e->key() == Qt::Key_F1 ) {
+ e->accept();
+ ClickOnHelp();
+ }
+}
+
+void EntityGUI_SketcherDlg::initSpinBox( SalomeApp_DoubleSpinBox* spinBox,
+ double min, double max,
+ double step, int decimals )
+{
+ spinBox->setDecimals( decimals );
+ spinBox->setRange( min, max );
+ spinBox->setSingleStep( step );
+}
+
+//=================================================================================
+// function : SetDoubleSpinBoxStep()
+// purpose : Double spin box management
+//=================================================================================
+void EntityGUI_SketcherDlg::SetDoubleSpinBoxStep( double step )
+{
+ Group1Spin->SpinBox_DX->setSingleStep(step);
+ Group2Spin->SpinBox_DX->setSingleStep(step);
+ Group2Spin->SpinBox_DY->setSingleStep(step);
+ Group3Spin->SpinBox_DX->setSingleStep(step);
+ Group3Spin->SpinBox_DY->setSingleStep(step);
+ Group3Spin->SpinBox_DZ->setSingleStep(step);
+ Group4Spin->SpinBox_DX->setSingleStep(step);
+ Group4Spin->SpinBox_DY->setSingleStep(step);
+ Group4Spin->SpinBox_DZ->setSingleStep(step);
+ Group4Spin->SpinBox_DS->setSingleStep(step);
+}
+
+//=================================================================================
+// function : FindLocalCS()
+// purpose : Find All Coordinates systems in study
+//=================================================================================
+void EntityGUI_SketcherDlg::FindLocalCS()
+{
+ ComboBox1->clear();
+ myLCSList.clear();
+ SalomeApp_Application* app =
+ dynamic_cast< SalomeApp_Application* >( SUIT_Session::session()->activeApplication() );
+ if ( !app )
+ return;
+
+ SalomeApp_Study* appStudy = dynamic_cast<SalomeApp_Study*>( app->activeStudy() );
+ if ( !appStudy )
+ return;
+ _PTR(Study) aStudy = appStudy->studyDS();
+ //add Global CS
+ ComboBox1->addItem(tr("GEOM_GCS"));
+ gp_Pnt aOrigin = gp_Pnt(0, 0, 0);
+ gp_Dir aDirZ = gp_Dir(0, 0, 1);
+ gp_Dir aDirX = gp_Dir(1, 0, 0);
+ gp_Ax3 globalCS = gp_Ax3(aOrigin, aDirZ, aDirX);
+ myLCSList.push_back(globalCS);
+ // get GEOM component
+ CORBA::String_var geomIOR = app->orb()->object_to_string( GeometryGUI::GetGeomGen() );
+ _PTR(SObject) obj = aStudy->FindObjectIOR( geomIOR.in() );
+ if (!obj)
+ return;
+ _PTR(SComponent) fc = obj->GetFatherComponent();
+ QString geomComp = fc->GetID().c_str();
+ _PTR(SObject) comp = aStudy->FindObjectID( geomComp.toLatin1().data() );
+ if ( !comp )
+ return;
+ // browse through all GEOM data tree
+ _PTR(ChildIterator) it ( aStudy->NewChildIterator( comp ) );
+ for ( it->InitEx( true ); it->More(); it->Next() ) {
+ _PTR(SObject) child( it->Value() );
+ CORBA::Object_var corbaObj = GeometryGUI::ClientSObjectToObject( child );
+ GEOM::GEOM_Object_var geomObj = GEOM::GEOM_Object::_narrow( corbaObj );
+ if( CORBA::is_nil( geomObj ) )
+ continue;
+ if (geomObj->GetType() == GEOM_MARKER) {
+ ComboBox1->addItem(geomObj->GetName());
+ TopoDS_Shape aShape = GEOM_Client().GetShape(GeometryGUI::GetGeomGen(), geomObj);
+
+ gp_Ax3 aLCS;
+ aLCS.Transform(aShape.Location().Transformation());
+ if (aShape.ShapeType() == TopAbs_FACE) {
+ Handle(Geom_Surface) aGS = BRep_Tool::Surface(TopoDS::Face(aShape));
+ if (!aGS.IsNull() && aGS->IsKind(STANDARD_TYPE(Geom_Plane))) {
+ Handle(Geom_Plane) aGPlane = Handle(Geom_Plane)::DownCast(aGS);
+ gp_Pln aPln = aGPlane->Pln();
+ aLCS = aPln.Position();
+ }
+ }
+ myLCSList.push_back(aLCS);
+ }
+ }
+}
+//=================================================================================
+// function : GetActiveLocalCS()
+// purpose : Find All Coordinates systems in study
+//=================================================================================
+gp_Ax3 EntityGUI_SketcherDlg::GetActiveLocalCS()
+{
+ int ind = ComboBox1->currentIndex();
+ if (ind == -1)
+ return myGeometryGUI->GetWorkingPlane();
+ gp_Ax3 aLCS = myLCSList.at(ind);
+ myGeometryGUI->SetWorkingPlane( aLCS );
+ myGeometryGUI->ActiveWorkingPlane();
+ return aLCS;
+}