updated copyright message

[modules/shaper.git] / src / CollectionPlugin / Test / TestGroup.py

diff --git a/src/CollectionPlugin/Test/TestGroup.py b/src/CollectionPlugin/Test/TestGroup.py
index 2892bbabd73ced5ff28e9ce1fa552b9cfb78d831..e8745305e0a58d0bd355e2923e529e83e29df1c8 100644 (file)
--- a/src/CollectionPlugin/Test/TestGroup.py
+++ b/src/CollectionPlugin/Test/TestGroup.py
@@ -1,22 +1,21 @@
-## Copyright (C) 2014-2017  CEA/DEN, EDF R&D
-##
-## This library is free software; you can redistribute it and/or
-## modify it under the terms of the GNU Lesser General Public
-## License as published by the Free Software Foundation; either
-## version 2.1 of the License, or (at your option) any later version.
-##
-## This library is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-## Lesser General Public License for more details.
-##
-## You should have received a copy of the GNU Lesser General Public
-## License along with this library; if not, write to the Free Software
-## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-##
-## See http:##www.salome-platform.org/ or
-## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
-##
+# Copyright (C) 2014-2023  CEA, EDF
+#
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+#
+# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
+#
 
 """
       TestBoolean.py
@@ -90,12 +89,12 @@ aSession.startOperation()
 aGroupFeature = aSession.activeDocument().addFeature("Group")
 aSelectionListAttr = aGroupFeature.selectionList("group_list")
 aSelectionListAttr.setSelectionType("vertex")
-aSelectionListAttr.append("Extrusion_1_1/Generated_Face_3&Extrusion_1_1/Generated_Face_1&Extrusion_1_1/To_Face_1_1")
-aSelectionListAttr.append("Extrusion_1_1/Generated_Face_3&Extrusion_1_1/Generated_Face_2&Extrusion_1_1/To_Face_1_1")
-aSelectionListAttr.append("Extrusion_1_1/Generated_Face_2&Extrusion_1_1/Generated_Face_1&Extrusion_1_1/To_Face_1_1")
-aSelectionListAttr.append("Extrusion_1_1/Generated_Face_3&Extrusion_1_1/Generated_Face_1&Extrusion_1_1/From_Face_1_1")
-aSelectionListAttr.append("Extrusion_1_1/Generated_Face_3&Extrusion_1_1/Generated_Face_2&Extrusion_1_1/From_Face_1_1")
-aSelectionListAttr.append("Extrusion_1_1/Generated_Face_2&Extrusion_1_1/Generated_Face_1&Extrusion_1_1/From_Face_1_1")
+aSelectionListAttr.append("[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_1][Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_3][Extrusion_1_1/To_Face]")
+aSelectionListAttr.append("[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_1][Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_2][Extrusion_1_1/To_Face]")
+aSelectionListAttr.append("[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_2][Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_3][Extrusion_1_1/To_Face]")
+aSelectionListAttr.append("[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_1][Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_3][Extrusion_1_1/From_Face]")
+aSelectionListAttr.append("[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_1][Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_2][Extrusion_1_1/From_Face]")
+aSelectionListAttr.append("[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_2][Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_3][Extrusion_1_1/From_Face]")
 aSession.finishOperation()
 #=========================================================================
 # Check results
@@ -110,15 +109,15 @@ aSession.startOperation()
 aGroupFeature = aSession.activeDocument().addFeature("Group")
 aSelectionListAttr = aGroupFeature.selectionList("group_list")
 aSelectionListAttr.setSelectionType("edge")
-aSelectionListAttr.append("Extrusion_1_1/Generated_Face_2&Extrusion_1_1/Generated_Face_1")
-aSelectionListAttr.append("Extrusion_1_1/Generated_Face_3&Extrusion_1_1/Generated_Face_2")
-aSelectionListAttr.append("Extrusion_1_1/Generated_Face_3&Extrusion_1_1/Generated_Face_1")
-aSelectionListAttr.append("Extrusion_1_1/Generated_Face_3&Extrusion_1_1/From_Face_1_1")
-aSelectionListAttr.append("Extrusion_1_1/Generated_Face_1&Extrusion_1_1/To_Face_1_1")
-aSelectionListAttr.append("Extrusion_1_1/Generated_Face_1&Extrusion_1_1/From_Face_1_1")
-aSelectionListAttr.append("Extrusion_1_1/Generated_Face_2&Extrusion_1_1/To_Face_1_1")
-aSelectionListAttr.append("Extrusion_1_1/Generated_Face_2&Extrusion_1_1/From_Face_1_1")
-aSelectionListAttr.append("Extrusion_1_1/Generated_Face_3&Extrusion_1_1/To_Face_1_1")
+aSelectionListAttr.append("[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_2][Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_3]")
+aSelectionListAttr.append("[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_1][Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_2]")
+aSelectionListAttr.append("[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_1][Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_3]")
+aSelectionListAttr.append("[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_1][Extrusion_1_1/From_Face]")
+aSelectionListAttr.append("[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_3][Extrusion_1_1/To_Face]")
+aSelectionListAttr.append("[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_3][Extrusion_1_1/From_Face]")
+aSelectionListAttr.append("[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_2][Extrusion_1_1/To_Face]")
+aSelectionListAttr.append("[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_2][Extrusion_1_1/From_Face]")
+aSelectionListAttr.append("[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_1][Extrusion_1_1/To_Face]")
 aSession.finishOperation()
 #=========================================================================
 # Check results
@@ -167,7 +166,7 @@ aSession.startOperation()
 aGroupFeature = aSession.activeDocument().addFeature("Group")
 aSelectionListAttr = aGroupFeature.selectionList("group_list")
 aSelectionListAttr.setSelectionType("face")
-aSelectionListAttr.append("Extrusion_1_1/To_Face_1_1")
+aSelectionListAttr.append("Extrusion_1_1/To_Face")
 aSession.finishOperation()
 #=========================================================================
 # Check results
@@ -199,7 +198,7 @@ aSession.finishOperation()
 #=========================================================================
 # Build shape from sketcher results
 aCircleSketchResult = modelAPI_ResultConstruction(aCircleSketchFeature.firstResult())
-assert(aCircleSketchResult.numFaces() > 0)
+assert(aCircleSketchResult.facesNum() > 0)
 # Create extrusion
 aSession.startOperation()
 anExtrusionFt = aPart.addFeature("Extrusion")