+# Copyright (C) 2014-2023 CEA, EDF
+#
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+#
+# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
+#
+
"""
TestBoolean.py
Unit test of FeaturesPlugin_Group class
aSession.finishOperation()
# Build sketch faces
aSession.startOperation()
-aSketchResult = aTriangleSketchFeature.firstResult()
-aSketchEdges = modelAPI_ResultConstruction(aSketchResult).shape()
-origin = geomDataAPI_Point(aTriangleSketchFeature.attribute("Origin")).pnt()
-dirX = geomDataAPI_Dir(aTriangleSketchFeature.attribute("DirX")).dir()
-norm = geomDataAPI_Dir(aTriangleSketchFeature.attribute("Norm")).dir()
-aSketchFaces = ShapeList()
-GeomAlgoAPI_SketchBuilder.createFaces(origin, dirX, norm, aSketchEdges, aSketchFaces)
+aSketchResult = modelAPI_ResultConstruction(aTriangleSketchFeature.firstResult())
# Create extrusion on them
anExtrusionFt = aPart.addFeature("Extrusion")
-anExtrusionFt.selectionList("base").append(aSketchResult, aSketchFaces[0])
+anExtrusionFt.selectionList("base").append(aSketchResult, aSketchResult.face(0))
anExtrusionFt.string("CreationMethod").setValue("BySizes")
anExtrusionFt.real("to_size").setValue(50)
anExtrusionFt.real("from_size").setValue(50)
-anExtrusionFt.real("to_offset").setValue(0) #TODO: remove
-anExtrusionFt.real("from_offset").setValue(0) #TODO: remove
anExtrusionFt.execute()
aSession.finishOperation()
anExtrusionBody = modelAPI_ResultBody(anExtrusionFt.firstResult())
aGroupFeature = aSession.activeDocument().addFeature("Group")
aSelectionListAttr = aGroupFeature.selectionList("group_list")
aSelectionListAttr.setSelectionType("vertex")
-aSelectionListAttr.append("Extrusion_1_1/Generated_Face_3&Extrusion_1_1/Generated_Face_1&Extrusion_1_1/To_Face_1_1")
-aSelectionListAttr.append("Extrusion_1_1/Generated_Face_3&Extrusion_1_1/Generated_Face_2&Extrusion_1_1/To_Face_1_1")
-aSelectionListAttr.append("Extrusion_1_1/Generated_Face_2&Extrusion_1_1/Generated_Face_1&Extrusion_1_1/To_Face_1_1")
-aSelectionListAttr.append("Extrusion_1_1/Generated_Face_3&Extrusion_1_1/Generated_Face_1&Extrusion_1_1/From_Face_1_1")
-aSelectionListAttr.append("Extrusion_1_1/Generated_Face_3&Extrusion_1_1/Generated_Face_2&Extrusion_1_1/From_Face_1_1")
-aSelectionListAttr.append("Extrusion_1_1/Generated_Face_2&Extrusion_1_1/Generated_Face_1&Extrusion_1_1/From_Face_1_1")
+aSelectionListAttr.append("[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_1][Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_3][Extrusion_1_1/To_Face]")
+aSelectionListAttr.append("[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_1][Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_2][Extrusion_1_1/To_Face]")
+aSelectionListAttr.append("[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_2][Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_3][Extrusion_1_1/To_Face]")
+aSelectionListAttr.append("[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_1][Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_3][Extrusion_1_1/From_Face]")
+aSelectionListAttr.append("[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_1][Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_2][Extrusion_1_1/From_Face]")
+aSelectionListAttr.append("[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_2][Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_3][Extrusion_1_1/From_Face]")
aSession.finishOperation()
#=========================================================================
# Check results
aGroupFeature = aSession.activeDocument().addFeature("Group")
aSelectionListAttr = aGroupFeature.selectionList("group_list")
aSelectionListAttr.setSelectionType("edge")
-aSelectionListAttr.append("Extrusion_1_1/Generated_Face_2&Extrusion_1_1/Generated_Face_1")
-aSelectionListAttr.append("Extrusion_1_1/Generated_Face_3&Extrusion_1_1/Generated_Face_2")
-aSelectionListAttr.append("Extrusion_1_1/Generated_Face_3&Extrusion_1_1/Generated_Face_1")
-aSelectionListAttr.append("Extrusion_1_1/Generated_Face_3&Extrusion_1_1/From_Face_1_1")
-aSelectionListAttr.append("Extrusion_1_1/Generated_Face_1&Extrusion_1_1/To_Face_1_1")
-aSelectionListAttr.append("Extrusion_1_1/Generated_Face_1&Extrusion_1_1/From_Face_1_1")
-aSelectionListAttr.append("Extrusion_1_1/Generated_Face_2&Extrusion_1_1/To_Face_1_1")
-aSelectionListAttr.append("Extrusion_1_1/Generated_Face_2&Extrusion_1_1/From_Face_1_1")
-aSelectionListAttr.append("Extrusion_1_1/Generated_Face_3&Extrusion_1_1/To_Face_1_1")
+aSelectionListAttr.append("[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_2][Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_3]")
+aSelectionListAttr.append("[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_1][Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_2]")
+aSelectionListAttr.append("[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_1][Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_3]")
+aSelectionListAttr.append("[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_1][Extrusion_1_1/From_Face]")
+aSelectionListAttr.append("[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_3][Extrusion_1_1/To_Face]")
+aSelectionListAttr.append("[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_3][Extrusion_1_1/From_Face]")
+aSelectionListAttr.append("[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_2][Extrusion_1_1/To_Face]")
+aSelectionListAttr.append("[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_2][Extrusion_1_1/From_Face]")
+aSelectionListAttr.append("[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_1][Extrusion_1_1/To_Face]")
aSession.finishOperation()
#=========================================================================
# Check results
aGroupFeature = aSession.activeDocument().addFeature("Group")
aSelectionListAttr = aGroupFeature.selectionList("group_list")
aSelectionListAttr.setSelectionType("face")
-aSelectionListAttr.append("Extrusion_1_1/To_Face_1_1")
+aSelectionListAttr.append("Extrusion_1_1/To_Face")
aSession.finishOperation()
#=========================================================================
# Check results
norm.setValue(0, 0, 1)
# Create circle
aSketchCircle = aCircleSketchFeature.addFeature("SketchCircle")
-anCircleCentr = geomDataAPI_Point2D(aSketchCircle.attribute("CircleCenter"))
-aCircleRadius = aSketchCircle.real("CircleRadius")
+anCircleCentr = geomDataAPI_Point2D(aSketchCircle.attribute("circle_center"))
+aCircleRadius = aSketchCircle.real("circle_radius")
anCircleCentr.setValue(0., 57.74)
aCircleRadius.setValue(50.)
aSession.finishOperation()
# Make extrusion on circle
#=========================================================================
# Build shape from sketcher results
-aCircleSketchResult = aCircleSketchFeature.firstResult()
-aCircleSketchEdges = modelAPI_ResultConstruction(aCircleSketchResult).shape()
-origin = geomDataAPI_Point(aCircleSketchFeature.attribute("Origin")).pnt()
-dirX = geomDataAPI_Dir(aCircleSketchFeature.attribute("DirX")).dir()
-norm = geomDataAPI_Dir(aCircleSketchFeature.attribute("Norm")).dir()
-aCircleSketchFaces = ShapeList()
-GeomAlgoAPI_SketchBuilder.createFaces(origin, dirX, norm, aCircleSketchEdges, aCircleSketchFaces)
-assert(len(aCircleSketchFaces) > 0)
-assert(aCircleSketchFaces[0] is not None)
+aCircleSketchResult = modelAPI_ResultConstruction(aCircleSketchFeature.firstResult())
+assert(aCircleSketchResult.facesNum() > 0)
# Create extrusion
aSession.startOperation()
anExtrusionFt = aPart.addFeature("Extrusion")
assert (anExtrusionFt.getKind() == "Extrusion")
# selection type FACE=4
-anExtrusionFt.selectionList("base").append(aCircleSketchResult, aCircleSketchFaces[0])
+anExtrusionFt.selectionList("base").append(aCircleSketchResult, aCircleSketchResult.face(0))
anExtrusionFt.string("CreationMethod").setValue("BySizes")
anExtrusionFt.real("to_size").setValue(50)
anExtrusionFt.real("from_size").setValue(50)
-anExtrusionFt.real("to_offset").setValue(0) #TODO: remove
-anExtrusionFt.real("from_offset").setValue(0) #TODO: remove
anExtrusionFt.execute()
aSession.finishOperation()
aCylinderBody = modelAPI_ResultBody(anExtrusionFt.firstResult())
# Create a cut
#=========================================================================
aSession.startOperation()
-aBooleanFt = aPart.addFeature("Boolean")
+aBooleanFt = aPart.addFeature("Cut")
aBooleanFt.selectionList("main_objects").append(anExtrusionBody, None)
aBooleanFt.selectionList("tool_objects").append(aCylinderBody, None)
-aBooleanTypeCut = 0
-aBooleanFt.integer("bool_type").setValue(aBooleanTypeCut)
aBooleanFt.execute()
aSession.finishOperation()
# End of test
#=========================================================================
-import model
+from salome.shaper import model
assert(model.checkPythonDump())
