+# Copyright (C) 2014-2022 CEA/DEN, EDF R&D
+#
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+#
+# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
+#
+
# Initialization of the test
from ModelAPI import *
from GeomDataAPI import *
aPartResult = modelAPI_ResultPart(aPartFeature.firstResult())
aPart = aPartResult.partDoc()
+# =============================================================================
+# Test 1. Create wire from edges of sketch
+# =============================================================================
+
# Create a sketch
aSession.startOperation()
aSketchFeature = featureToCompositeFeature(aPart.addFeature("Sketch"))
# Test results
assert (len(aWireFeature.results()) > 0)
-import model
-assert(model.checkPythonDump())
+from salome.shaper import model
+
+# =============================================================================
+# Test 2. Complete contour by selecting only one edge
+# =============================================================================
+
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
+SketchLine_1 = Sketch_1.addLine(-68.61063464837, 232.418524871355, -488.85077186964, 232.418524871355)
+SketchLine_2 = Sketch_1.addLine(-488.85077186964, 232.418524871355, -488.85077186964, -153.516295025729)
+SketchLine_3 = Sketch_1.addLine(-488.85077186964, -153.516295025729, -68.61063464837, -153.516295025729)
+SketchLine_4 = Sketch_1.addLine(-68.61063464837, -153.516295025729, -68.61063464837, 232.418524871355)
+SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_1.startPoint())
+SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
+SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
+SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
+SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_1.result())
+SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_2.result())
+SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_3.result())
+SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_4.result())
+model.do()
+Wire_1 = model.addWire(Part_1_doc, [model.selection("EDGE", "Sketch_1/SketchLine_1")])
+Wire_1.addContour()
+model.end()
+
+# =============================================================================
+# Test 3. Create wire from edges of solid
+# =============================================================================
+
+# Box
+aSession.startOperation()
+aBox = aPart.addFeature("Box")
+aBox.string("CreationMethod").setValue("BoxByDimensions")
+aBox.real("dx").setValue(20)
+aBox.real("dy").setValue(20)
+aBox.real("dz").setValue(20)
+aSession.finishOperation()
+aBoxResult = aBox.firstResult()
+aBoxShape = aBoxResult.shape()
+
+# Wire
+aSession.startOperation()
+aWireFeature2 = aPart.addFeature("Wire")
+aBaseObjectsList = aWireFeature2.selectionList("base_objects")
+aBaseObjectsList.append("[Box_1_1/Front][Box_1_1/Bottom]", "EDGE")
+aBaseObjectsList.append("[Box_1_1/Front][Box_1_1/Right]", "EDGE")
+aBaseObjectsList.append("[Box_1_1/Right][Box_1_1/Top]", "EDGE")
+aBaseObjectsList.append("[Box_1_1/Back][Box_1_1/Top]", "EDGE")
+aBaseObjectsList.append("[Box_1_1/Back][Box_1_1/Left]", "EDGE")
+aBaseObjectsList.append("[Box_1_1/Left][Box_1_1/Bottom]", "EDGE")
+aSession.finishOperation()
+
+# Test results
+assert (len(aWireFeature2.results()) == 1)
+
+# =============================================================================
+# Test 4. Check Wire feature on the whole sketch
+# =============================================================================
+
+aSession.startOperation()
+aWireFeature3 = aPart.addFeature("Wire")
+aBaseObjectsList = aWireFeature3.selectionList("base_objects")
+aBaseObjectsList.append(aSketchResult, None)
+aSession.finishOperation()
+assert (len(aWireFeature3.results()) == 1)
+
+# =============================================================================
+# Test 5. Check Wire feature failed on incorrect input
+# =============================================================================
+
+aSession.startOperation()
+aWireFeature3 = aPart.addFeature("Wire")
+aBaseObjectsList = aWireFeature3.selectionList("base_objects")
+aShapeExplorer = GeomAPI_ShapeExplorer(aBoxShape, GeomAPI_Shape.VERTEX)
+aShape = aShapeExplorer.current()
+aBaseObjectsList.append(aBoxResult, aShape)
+aSession.finishOperation()
+assert (len(aWireFeature3.results()) == 0)
+
+aSession.startOperation()
+aBaseObjectsList.clear()
+aShapeExplorer = GeomAPI_ShapeExplorer(aBoxShape, GeomAPI_Shape.FACE)
+aShape = aShapeExplorer.current()
+aBaseObjectsList.append(aBoxResult, aShape)
+aSession.finishOperation()
+assert (len(aWireFeature3.results()) == 0)
+
+# remove failed feature
+aSession.startOperation()
+aPart.removeFeature(aWireFeature3)
+aSession.finishOperation()
+
+assert(model.checkPythonDump(model.ModelHighAPI.CHECK_NAMING))
