+# Copyright (C) 2014-2022 CEA/DEN, EDF R&D
+#
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+#
+# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
+#
+
# Initialization of the test
from ModelAPI import *
from GeomDataAPI import *
aPartResult = modelAPI_ResultPart(aPartFeature.firstResult())
aPart = aPartResult.partDoc()
+# =============================================================================
+# Test 1. Create face from edges of sketch
+# =============================================================================
+
# Create a sketch
aSession.startOperation()
aSketchFeature = featureToCompositeFeature(aPart.addFeature("Sketch"))
aNorm.setValue(0, 0, 1)
# Create lines
-aNumOfLines = 10
aSketchLineFeature = aSketchFeature.addFeature("SketchLine")
aSketchLineStartPoint = geomDataAPI_Point2D(aSketchLineFeature.attribute("StartPoint"))
aSketchLineEndPoint = geomDataAPI_Point2D(aSketchLineFeature.attribute("EndPoint"))
# Test results
assert (len(aFaceFeature.results()) > 0)
+
+# =============================================================================
+# Test 2. Create face from edges of solid
+# =============================================================================
+
+# Cylinder
+aSession.startOperation()
+aCylinder = aPart.addFeature("Cylinder")
+aCylinder.string("CreationMethod").setValue("Cylinder")
+aCylinder.selection("base_point").selectSubShape("VERTEX", "PartSet/Origin")
+aCylinder.selection("axis").selectSubShape("EDGE", "PartSet/OZ")
+aCylinder.real("radius").setValue(5)
+aCylinder.real("height").setValue(10)
+aSession.finishOperation()
+aCylinderResult = aCylinder.firstResult()
+aCylinderShape = aCylinderResult.shape()
+
+# Create face
+aSession.startOperation()
+aFaceFeature2 = aPart.addFeature("Face")
+aBaseObjectsList = aFaceFeature2.selectionList("base_objects")
+aBaseObjectsList.append("[Cylinder_1_1/Face_1][Cylinder_1_1/Face_2]", "EDGE")
+aSession.finishOperation()
+assert (len(aFaceFeature2.results()) > 0)
+
+# =============================================================================
+# Test 3. Create face from face of solid
+# =============================================================================
+aSession.startOperation()
+aCylinder = aPart.addFeature("Cylinder")
+aCylinder.string("CreationMethod").setValue("Cylinder")
+aCylinder.selection("base_point").selectSubShape("VERTEX", "PartSet/Origin")
+aCylinder.selection("axis").selectSubShape("EDGE", "PartSet/OZ")
+aCylinder.real("radius").setValue(5)
+aCylinder.real("height").setValue(10)
+aSession.finishOperation()
+aCylinderResult = aCylinder.firstResult()
+aCylinderShape = aCylinderResult.shape()
+
+aSession.startOperation()
+aFaceFeature3 = aPart.addFeature("Face")
+aBaseObjectsList = aFaceFeature3.selectionList("base_objects")
+aBaseObjectsList.append("Cylinder_2_1/Face_1", "FACE")
+aSession.finishOperation()
+assert (len(aFaceFeature3.results()) > 0)
+
+# =============================================================================
+# Test 4. Verify error is reported if selection of face feature is mixed (edges and face)
+# =============================================================================
+
+aSession.startOperation()
+aCylinder = aPart.addFeature("Cylinder")
+aCylinder.string("CreationMethod").setValue("Cylinder")
+aCylinder.selection("base_point").selectSubShape("VERTEX", "PartSet/Origin")
+aCylinder.selection("axis").selectSubShape("EDGE", "PartSet/OZ")
+aCylinder.real("radius").setValue(5)
+aCylinder.real("height").setValue(10)
+aSession.finishOperation()
+aCylinderResult = aCylinder.firstResult()
+aCylinderShape = aCylinderResult.shape()
+
+aSession.startOperation()
+aFaceFeature4 = aPart.addFeature("Face")
+aBaseObjectsList = aFaceFeature4.selectionList("base_objects")
+aShapeExplorer = GeomAPI_ShapeExplorer(aSketchShape, GeomAPI_Shape.EDGE)
+while aShapeExplorer.more():
+ aBaseObjectsList.append(aSketchResult, aShapeExplorer.current())
+ aShapeExplorer.next()
+aBaseObjectsList.append("Cylinder_3_1/Face_3", "FACE")
+aSession.finishOperation()
+assert (len(aFaceFeature4.results()) == 0)
+# remove failed feature
+aSession.startOperation()
+aPart.removeFeature(aFaceFeature4)
+aSession.finishOperation()
+
+# =============================================================================
+# Test 5. Check Face feature failed on incorrect input
+# =============================================================================
+
+aSession.startOperation()
+aFaceFeature5 = aPart.addFeature("Face")
+aBaseObjectsList = aFaceFeature5.selectionList("base_objects")
+aBaseObjectsList.append(aCylinderResult, None)
+aSession.finishOperation()
+assert (len(aFaceFeature5.results()) == 0)
+
+aSession.startOperation()
+aBaseObjectsList.clear()
+aShapeExplorer = GeomAPI_ShapeExplorer(aCylinderShape, GeomAPI_Shape.VERTEX)
+aShape = aShapeExplorer.current()
+aBaseObjectsList.append(aCylinderResult, aShape)
+aSession.finishOperation()
+assert (len(aFaceFeature5.results()) == 0)
+
+aSession.startOperation()
+aBaseObjectsList.clear()
+aShapeExplorer = GeomAPI_ShapeExplorer(aFaceFeature.lastResult().shape(), GeomAPI_Shape.EDGE)
+aShape = aShapeExplorer.current()
+aBaseObjectsList.append(aFaceFeature.lastResult(), aShape)
+aSession.finishOperation()
+assert (len(aFaceFeature5.results()) == 0)
+
+# remove failed feature
+aSession.startOperation()
+aPart.removeFeature(aFaceFeature5)
+aSession.finishOperation()
+
+from salome.shaper import model
+assert(model.checkPythonDump())
