-// Copyright (C) 2007-2016 CEA/DEN, EDF R&D
+// Copyright (C) 2007-2019 CEA/DEN, EDF R&D
//
// This library is free software; you can redistribute it and/or
// modify it under the terms of the GNU Lesser General Public
}
//=============================================================================
-BLSURFPlugin_Hypothesis::BLSURFPlugin_Hypothesis(int hypId, int studyId, SMESH_Gen * gen, bool hasgeom) :
- SMESH_Hypothesis(hypId, studyId, gen),
+BLSURFPlugin_Hypothesis::BLSURFPlugin_Hypothesis(int hypId, SMESH_Gen * gen, bool hasgeom) :
+ SMESH_Hypothesis(hypId, gen),
_physicalMesh(GetDefaultPhysicalMesh()),
_geometricMesh(GetDefaultGeometricMesh()),
_phySize(GetDefaultPhySize()),
_gradation(GetDefaultGradation()),
_useVolumeGradation(GetDefaultUseVolumeGradation()),
_volumeGradation(GetDefaultVolumeGradation()),
- _quadAllowed(GetDefaultQuadAllowed()),
+ _elementType(GetDefaultElementType()),
_angleMesh(GetDefaultAngleMesh()),
- _chordalError(GetDefaultChordalError()),
+ _chordalError(GetDefaultChordalError()),
_anisotropic(GetDefaultAnisotropic()),
_anisotropicRatio(GetDefaultAnisotropicRatio()),
_removeTinyEdges(GetDefaultRemoveTinyEdges()),
_quadraticMesh(GetDefaultQuadraticMesh()),
_verb(GetDefaultVerbosity()),
_topology(GetDefaultTopology()),
+ _useSurfaceProximity(GetDefaultUseSurfaceProximity()),
+ _nbSurfaceProximityLayers(GetDefaultNbSurfaceProximityLayers()),
+ _surfaceProximityRatio(GetDefaultSurfaceProximityRatio()),
+ _useVolumeProximity(GetDefaultUseVolumeProximity()),
+ _nbVolumeProximityLayers(GetDefaultNbVolumeProximityLayers()),
+ _volumeProximityRatio(GetDefaultVolumeProximityRatio()),
_preCADMergeEdges(GetDefaultPreCADMergeEdges()),
_preCADRemoveDuplicateCADFaces(GetDefaultPreCADRemoveDuplicateCADFaces()),
_preCADProcess3DTopology(GetDefaultPreCADProcess3DTopology()),
{
_name = GetHypType(hasgeom);
_param_algo_dim = 2;
-
-// _GMFFileMode = false; // GMF ascii mode
// Advanced options with their defaults according to MG User Manual
- const char* boolOptionNames[] = { "enforce_cad_edge_sizes", // default = 0
- // "correct_surface_intersections", // default = 1
- // "create_tag_on_collision", // default = 1
- "jacobian_rectification_respect_geometry", // default = 1
- "rectify_jacobian", // default = 1
- "respect_geometry", // default = 1
- // "optimise_tiny_edges", // default = 0
- // "remove_duplicate_cad_faces", // default = 1
- "tiny_edge_avoid_surface_intersections", // default = 1
- "debug", // default = 0
- // "tiny_edge_respect_geometry", // default = 0
- "" // mark of end
- };
+ const char* boolOptionNames[] = { "enforce_cad_edge_sizes", // default = 0
+ "jacobian_rectification_respect_geometry", // default = 1
+ "rectify_jacobian", // default = 1
+ "respect_geometry", // default = 1
+ "tiny_edge_avoid_surface_intersections", // default = 1
+ "debug", // default = 0
+ "allow_patch_independent", // false
+ "" // mark of end
+ };
const char* intOptionNames[] = { "max_number_of_points_per_patch", // default = 100000
+ "max_number_of_threads", // default = 4
"" // mark of end
- };
+ };
const char* doubleOptionNames[] = { // "surface_intersections_processing_max_cost",// default = 15
// "periodic_tolerance", // default = diag/100
// "volume_gradation",
// "tiny_edge_optimisation_length", // default = diag * 1e-6
- "" // mark of end
- };
+ "" // mark of end
+ };
const char* charOptionNames[] = { // "required_entities", // default = "respect"
// "tags", // default = "respect"
- "" // mark of end
- };
+ "" // mark of end
+ };
// PreCAD advanced options
const char* preCADboolOptionNames[] = { "closed_geometry", // default = 0
// remove_tiny_uv_edges option is not documented
// but it is useful that the user can change it to disable all preprocessing options
"remove_tiny_uv_edges", // default = 1
+ "compute_ridges", // true
"" // mark of end
};
const char* preCADintOptionNames[] = { // "manifold_geometry", // default = 0
_defaultOptionValues["enforce_cad_edge_sizes" ] = "no";
_defaultOptionValues["jacobian_rectification_respect_geometry"] = "yes";
_defaultOptionValues["max_number_of_points_per_patch" ] = "0";
+ _defaultOptionValues["max_number_of_threads" ] = "4";
_defaultOptionValues["rectify_jacobian" ] = "yes";
_defaultOptionValues["respect_geometry" ] = "yes";
_defaultOptionValues["tiny_edge_avoid_surface_intersections" ] = "yes";
+ //_defaultOptionValues["use_deprecated_patch_mesher" ] = "no";
_defaultOptionValues["debug" ] = "no";
+ _defaultOptionValues["allow_patch_independent" ] = "no";
if ( hasgeom )
{
_defaultOptionValues["closed_geometry" ] = "no";
_defaultOptionValues["required_entities" ] = "respect";
_defaultOptionValues["sewing_tolerance" ] = "5e-4*D";
_defaultOptionValues["tags" ] = "respect";
+ _defaultOptionValues["compute_ridges" ] = "yes";
}
#ifdef _DEBUG_
ASSERT( _option2value.size() + _preCADoption2value.size() == _defaultOptionValues.size() );
#endif
- _sizeMap.clear();
- _attractors.clear();
- _faceEntryEnfVertexListMap.clear();
- _enfVertexList.clear();
- _faceEntryCoordsListMap.clear();
- _coordsEnfVertexMap.clear();
- _faceEntryEnfVertexEntryListMap.clear();
- _enfVertexEntryEnfVertexMap.clear();
- _groupNameNodeIDMap.clear();
-
- /* TODO GROUPS
- _groupNameEnfVertexListMap.clear();
- _enfVertexGroupNameMap.clear();
- */
}
TopoDS_Shape BLSURFPlugin_Hypothesis::entryToShape(std::string entry)
{
GEOM::GEOM_Object_var aGeomObj;
- SMESH_Gen_i* smeshGen_i = SMESH_Gen_i::GetSMESHGen();
- SALOMEDS::Study_ptr myStudy = smeshGen_i->GetCurrentStudy();
TopoDS_Shape S = TopoDS_Shape();
- SALOMEDS::SObject_var aSObj = myStudy->FindObjectID( entry.c_str() );
+ SALOMEDS::SObject_var aSObj = SMESH_Gen_i::getStudyServant()->FindObjectID( entry.c_str() );
if (!aSObj->_is_nil() ) {
CORBA::Object_var obj = aSObj->GetObject();
aGeomObj = GEOM::GEOM_Object::_narrow(obj);
aSObj->UnRegister();
}
if ( !aGeomObj->_is_nil() )
- S = smeshGen_i->GeomObjectToShape( aGeomObj.in() );
+ S = SMESH_Gen_i::GetSMESHGen()->GeomObjectToShape( aGeomObj.in() );
return S;
}
}
//=============================================================================
-void BLSURFPlugin_Hypothesis::SetQuadAllowed(bool theVal) {
- if (theVal != _quadAllowed) {
- _quadAllowed = theVal;
+void BLSURFPlugin_Hypothesis::SetElementType(ElementType theElementType) {
+ if (theElementType != _elementType) {
+ _elementType = theElementType;
NotifySubMeshesHypothesisModification();
}
}
}
}
+//=============================================================================
+void BLSURFPlugin_Hypothesis::SetUseSurfaceProximity( bool toUse )
+{
+ if ( _useSurfaceProximity != toUse )
+ {
+ _useSurfaceProximity = toUse;
+ NotifySubMeshesHypothesisModification();
+ }
+}
+
+//=============================================================================
+void BLSURFPlugin_Hypothesis::SetNbSurfaceProximityLayers( int nbLayers )
+{
+ if ( _nbSurfaceProximityLayers != nbLayers )
+ {
+ _nbSurfaceProximityLayers = nbLayers;
+ NotifySubMeshesHypothesisModification();
+ }
+}
+
+//=============================================================================
+void BLSURFPlugin_Hypothesis::SetSurfaceProximityRatio( double ratio )
+{
+ if ( _surfaceProximityRatio != ratio )
+ {
+ _surfaceProximityRatio = ratio;
+ NotifySubMeshesHypothesisModification();
+ }
+}
+
+//=============================================================================
+void BLSURFPlugin_Hypothesis::SetUseVolumeProximity( bool toUse )
+{
+ if ( _useVolumeProximity != toUse )
+ {
+ _useVolumeProximity = toUse;
+ NotifySubMeshesHypothesisModification();
+ }
+}
+
+//=============================================================================
+void BLSURFPlugin_Hypothesis::SetNbVolumeProximityLayers( int nbLayers )
+{
+ if ( _nbVolumeProximityLayers != nbLayers )
+ {
+ _nbVolumeProximityLayers = nbLayers;
+ NotifySubMeshesHypothesisModification();
+ }
+}
+
+//=============================================================================
+void BLSURFPlugin_Hypothesis::SetVolumeProximityRatio( double ratio )
+{
+ if ( _volumeProximityRatio != ratio )
+ {
+ _volumeProximityRatio = ratio;
+ NotifySubMeshesHypothesisModification();
+ }
+}
+
//=============================================================================
void BLSURFPlugin_Hypothesis::SetVerbosity(int theVal) {
if (theVal != _verb) {
}
//=============================================================================
+void BLSURFPlugin_Hypothesis::SetUseDeprecatedPatchMesher( bool useDeprecatedPatchMesher )
+{
+ // if ( GetUseDeprecatedPatchMesher() != useDeprecatedPatchMesher )
+ // {
+ // SetOptionValue( "use_deprecated_patch_mesher", useDeprecatedPatchMesher ? "yes" : "no" );
+ // NotifySubMeshesHypothesisModification();
+ // }
+}
+//=============================================================================
+bool BLSURFPlugin_Hypothesis::GetUseDeprecatedPatchMesher()
+{
+ return false;//ToBool( GetOptionValue("use_deprecated_patch_mesher", GET_DEFAULT()));
+}
+//=============================================================================
+
void BLSURFPlugin_Hypothesis::SetMaxNumberOfPointsPerPatch( int nb )
throw (std::invalid_argument)
{
}
//=============================================================================
+void BLSURFPlugin_Hypothesis::SetMaxNumberOfThreads( int nb )
+ throw (std::invalid_argument)
+{
+ if ( nb < 0 )
+ throw std::invalid_argument( SMESH_Comment("Invalid number of threads: ") << nb );
+
+ if ( GetMaxNumberOfThreads() != nb )
+ {
+ SetOptionValue("max_number_of_threads", SMESH_Comment( nb ));
+ NotifySubMeshesHypothesisModification();
+ }
+}
+//=============================================================================
+int BLSURFPlugin_Hypothesis::GetMaxNumberOfThreads()
+{
+ return ToInt( GetOptionValue("max_number_of_threads", GET_DEFAULT()));
+}
+//=============================================================================
+
void BLSURFPlugin_Hypothesis::SetRespectGeometry( bool toRespect )
{
if ( GetRespectGeometry() != toRespect )
// //////// CREATE ////////////
if (toCreate) {
toNotify = true;
- _faceEntryEnfVertexListMap[theFaceEntry].insert(newEnfVertex);
- _enfVertexList.insert(newEnfVertex);
- if (theVertexEntry == "") {
- _faceEntryCoordsListMap[theFaceEntry].insert(newEnfVertex->coords);
- _coordsEnfVertexMap[newEnfVertex->coords] = newEnfVertex;
- }
- else {
- _faceEntryEnfVertexEntryListMap[theFaceEntry].insert(newEnfVertex->geomEntry);
- _enfVertexEntryEnfVertexMap[newEnfVertex->geomEntry] = newEnfVertex;
- }
+ AddEnforcedVertex( theFaceEntry, newEnfVertex );
+ }
+ else {
+ delete newEnfVertex;
}
if (toNotify)
return toNotify;
}
+//=======================================================================
+//function : AddEnforcedVertex
+//=======================================================================
+
+void BLSURFPlugin_Hypothesis::AddEnforcedVertex( const TEntry& faceEntry,
+ TEnfVertex * newEnfVertex )
+{
+ if ( newEnfVertex )
+ {
+ _faceEntryEnfVertexListMap[faceEntry].insert(newEnfVertex);
+ _enfVertexList.insert(newEnfVertex);
+ if ( newEnfVertex->geomEntry.empty() ) {
+ _faceEntryCoordsListMap[faceEntry].insert(newEnfVertex->coords);
+ _coordsEnfVertexMap[newEnfVertex->coords] = newEnfVertex;
+ }
+ else {
+ _faceEntryEnfVertexEntryListMap[faceEntry].insert(newEnfVertex->geomEntry);
+ _enfVertexEntryEnfVertexMap[newEnfVertex->geomEntry] = newEnfVertex;
+ }
+ }
+}
//=======================================================================
//function : GetEnforcedVertices
//=======================================================================
//function : ClearAllEnforcedVertices
//=======================================================================
-void BLSURFPlugin_Hypothesis::ClearAllEnforcedVertices() {
+void BLSURFPlugin_Hypothesis::ClearAllEnforcedVertices()
+{
_faceEntryEnfVertexListMap.clear();
- _enfVertexList.clear();
_faceEntryCoordsListMap.clear();
_coordsEnfVertexMap.clear();
_faceEntryEnfVertexEntryListMap.clear();
_enfVertexEntryEnfVertexMap.clear();
+
+ TEnfVertexList::iterator it_enfVertex = _enfVertexList.begin();
+ for ( ; it_enfVertex != _enfVertexList.end(); ++it_enfVertex )
+ delete *it_enfVertex;
+ _enfVertexList.clear();
+
// Enable internal enforced vertices on specific face if requested by user
// _faceEntryInternalVerticesList.clear();
NotifySubMeshesHypothesisModification();
}
+
//================================================================================
/*!
* \brief Return the enforced vertices
}
save << " " << (int) _topology << " " << (int) _physicalMesh << " " << (int) _geometricMesh << " " << _phySize << " "
- << _angleMesh << " " << _gradation << " " << (int) _quadAllowed << " " << _decimesh;
+ << _angleMesh << " " << _gradation << " " << (int) _elementType << " " << _decimesh;
save << " " << _minSize << " " << _maxSize << " " << _angleMesh << " " << _minSize << " " << _maxSize << " " << _verb;
save << " " << (int) _preCADMergeEdges << " " << _preCADRemoveNanoEdges << " " << (int) _preCADDiscardInput << " " << _preCADEpsNano ;
save << " " << (int) _enforcedInternalVerticesAllFaces;
save << *tag << " ";
}
+ // New options in 2.9.6 (issue #17784)
+ save << " " << _useSurfaceProximity;
+ save << " " << _nbSurfaceProximityLayers;
+ save << " " << _surfaceProximityRatio;
+ save << " " << _useVolumeProximity;
+ save << " " << _nbVolumeProximityLayers;
+ save << " " << _volumeProximityRatio;
+
return save;
}
isOK = static_cast<bool>(load >> i);
if (isOK)
- _quadAllowed = (bool) i;
+ _elementType = (ElementType) i;
else
load.clear(std::ios::badbit | load.rdstate());
break;
isOK = static_cast<bool>(load >> newAtShapeEntry);
if (!isOK)
- break;
+ break;
isOK = static_cast<bool>(load >> attParams[0]>>attParams[1]>>attParams[2]>>attParams[3]); //>>step);
}
if (isOK) {
}
}
+ if ( hasEnforcedVertex ) {
+ isOK = static_cast<bool>(load >> option_or_sm);
+ if (isOK) {
+ if (option_or_sm == "__PRECAD_FACES_PERIODICITY_BEGIN__")
+ hasPreCADFacesPeriodicity = true;
+ else if (option_or_sm == "__PRECAD_EDGES_PERIODICITY_BEGIN__")
+ hasPreCADEdgesPeriodicity = true;
+ else if (option_or_sm == "__FACES_PERIODICITY_BEGIN__")
+ hasFacesPeriodicity = true;
+ else if (option_or_sm == "__EDGES_PERIODICITY_BEGIN__")
+ hasEdgesPeriodicity = true;
+ else if (option_or_sm == "__VERTICES_PERIODICITY_BEGIN__")
+ hasVerticesPeriodicity = true;
+ }
+ }
+
// PERIODICITY
if (hasPreCADFacesPeriodicity)
}
}
+ // New options in 2.9.6 (issue #17784)
+ if ( static_cast<bool>( load >> _useSurfaceProximity ));
+ {
+ load >> _nbSurfaceProximityLayers;
+ load >> _surfaceProximityRatio;
+ load >> _useVolumeProximity;
+ load >> _nbVolumeProximityLayers;
+ isOK = static_cast<bool>( load >> _volumeProximityRatio );
+ }
+
return load;
}
if (hasTargetVertices)
periodicity_i->theTargetVerticesEntries = theTargetVerticesEntries;
- if ( shapeType && strcmp( shapeType, "FACES" ))
+ if ( shapeType && strcmp( shapeType, "FACES" ) == 0 )
_preCadFacesPeriodicityVector.push_back(*periodicity_i);
else
_preCadEdgesPeriodicityVector.push_back(*periodicity_i);
