-// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE
+// Copyright (C) 2007-2011 CEA/DEN, EDF R&D, OPEN CASCADE
//
-// Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
-// CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
+// Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
+// CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
//
-// This library is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License.
+// This library is free software; you can redistribute it and/or
+// modify it under the terms of the GNU Lesser General Public
+// License as published by the Free Software Foundation; either
+// version 2.1 of the License.
//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
+// This library is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+// Lesser General Public License for more details.
//
-// You should have received a copy of the GNU Lesser General Public
-// License along with this library; if not, write to the Free Software
-// Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+// You should have received a copy of the GNU Lesser General Public
+// License along with this library; if not, write to the Free Software
+// Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
//
-// See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
+// See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
//
// File : GEOM_Gen.idl
// Author : Sergey RUIN
FOM_AutoCorrect
};
+ /*!
+ * Kind of the curves.
+ * Used in the function GEOM_Gen.MakeCurveParametric()
+ */
+ enum curve_type {
+ /*! Polyline curve */
+ Polyline,
+
+ /*! Bezier curve */
+ Bezier,
+
+ /*! Interpolation, curve */
+ Interpolation
+ };
+
typedef sequence<string> string_array;
typedef sequence<short> short_array;
*/
GEOM_Object OffsetShapeCopy (in GEOM_Object theObject, in double theOffset);
+ /*!
+ * Create new object as projection of the given one on a 2D surface.
+ * \param theSource The source object for the projection. It can be a point, edge or wire.
+ * \param theTarget The target object. It can be planar or cylindrical face.
+ * \return New GEOM_Object, containing the projection.
+ */
+ GEOM_Object ProjectShapeCopy (in GEOM_Object theSource, in GEOM_Object theTarget);
+
/*!
* Scale the given object by the factor.
* \param theObject The object to be scaled.
* \param theTolerance Maximum distance between faces, which can be considered as coincident.
* \param theFaces List of faces for gluing.
* \param doKeepNonSolids If FALSE, only solids will present in the result, otherwise all initial shapes.
+ * \param doGlueAllEdges If TRUE, all coincident edges of <VAR>theShape</VAR>
+ * will be glued, otherwise only the edges,
+ * belonging to <VAR>theFaces</VAR>.
* \return New GEOM_Object, containing a copy of theShape without some faces.
*/
GEOM_Object MakeGlueFacesByList (in GEOM_Object theShape, in double theTolerance,
- in ListOfGO theFaces, in boolean doKeepNonSolids);
+ in ListOfGO theFaces, in boolean doKeepNonSolids,
+ in boolean doGlueAllEdges);
+
+ /*!
+ * Replace coincident edges in theShape by one edge.
+ * \param theShape Initial shape.
+ * \param theTolerance Maximum distance between edges, which can be considered as coincident.
+ * \return New GEOM_Object, containing a copy of theShape without coincident edges.
+ */
+ GEOM_Object MakeGlueEdges (in GEOM_Object theShape, in double theTolerance);
+
+ /*!
+ * Find coincident edges in theShape for possible gluing.
+ * \param theShape Initial shape.
+ * \param theTolerance Maximum distance between edges, which can be considered as coincident.
+ * \return ListOfGO
+ */
+ ListOfGO GetGlueEdges (in GEOM_Object theShape, in double theTolerance);
+
+ /*!
+ * Replace coincident edges in theShape by one edge
+ * in compliance with given list of edges
+ * \param theShape Initial shape.
+ * \param theTolerance Maximum distance between edges, which can be considered as coincident.
+ * \param theFaces List of edges for gluing.
+ * \return New GEOM_Object, containing a copy of theShape without some edges.
+ */
+ GEOM_Object MakeGlueEdgesByList (in GEOM_Object theShape,
+ in double theTolerance,
+ in ListOfGO theEdges);
/*!
* Get all sub-shapes and groups of \a theShape,
/*!
* Get a sub shape defined by its unique ID inside \a theMainShape
+ * \param theMainShape Main shape.
+ * \param theID Unique ID of sub shape inside \a theMainShape.
+ * \return GEOM_Object, corresponding to found sub shape.
* \note The sub shape GEOM_Objects can has ONLY ONE function.
- * Don't try to apply modification operations on them.
+ * Don't try to apply modification operations (without copy) on them.
*/
GEOM_Object GetSubShape (in GEOM_Object theMainShape,
in long theID);
+ /*!
+ * Get a set of sub shapes defined by their unique IDs inside \a theMainShape
+ * \param theMainShape Main shape.
+ * \param theIndices List of unique IDs of sub shapes inside \a theMainShape.
+ * \return List of GEOM_Objects, corresponding to found sub shapes.
+ * \note The sub shape GEOM_Objects can has ONLY ONE function.
+ * Don't try to apply modification operations (without copy) on them.
+ */
+ ListOfGO MakeSubShapes (in GEOM_Object theMainShape,
+ in ListOfLong theIndices);
+
/*!
* Get global index of \a theSubShape in \a theMainShape.
* \param theMainShape Main shape.
in boolean theIsClosed,
in boolean theDoReordering);
+ /*!
+ * Creates a curve using the parametric definition of the basic points.
+ * \param thexExpr parametric equation of the coordinates X.
+ * \param theyExpr parametric equation of the coordinates Y.
+ * \param thezExpr parametric equation of the coordinates Z.
+ * \param theParamMin the minimal value of the parameter.
+ * \param theParamMax the maximum value of the parameter.
+ * \param theParamStep the step of the parameter.
+ * \param theCurveType the type of the curve.
+ * \return New GEOM_Object, containing the created curve.
+ */
+ GEOM_Object MakeCurveParametric(in string thexExpr,
+ in string theyExpr,
+ in string thezExpr,
+ in double theParamMin,
+ in double theParamMax,
+ in double theParamStep,
+ in curve_type theCurveType);
+
/*!
* Create a sketcher (wire or face), following the textual description,
* passed through \a theCommand argument. \n
/*!
* Add a sub shape defined by indices in \a theIndices
- * (contains unique IDs of sub shapes inside theMainShape)
+ * (contains unique IDs of sub shapes inside \a theMainShape)
* \note The sub shape GEOM_Objects can has ONLY ONE function.
* Don't try to apply modification operations on them.
* \note Internal method
