+// Copyright (C) 2005 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
+// CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
+//
+// This library is free software; you can redistribute it and/or
+// modify it under the terms of the GNU Lesser General Public
+// License as published by the Free Software Foundation; either
+// version 2.1 of the License.
+//
+// This library is distributed in the hope that it will be useful
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+// Lesser General Public License for more details.
+//
+// You should have received a copy of the GNU Lesser General Public
+// License along with this library; if not, write to the Free Software
+// Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+//
+// See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
+//
// File : GEOM_Gen.idl
// Author : Sergey RUIN
GEOM_Object MakePointOnCurve (in GEOM_Object theRefCurve,
in double theParameter);
+
+ /*!
+ * Create a vector, corresponding to tangent to the given parameter on the given curve.
+ * \param theRefCurve The referenced curve.
+ * \param theParameter Value of parameter on the referenced curve.This value should be have value
+ * \between 0. and 1.. Value of 0. corresponds first parameter of curve value 1. corresponds
+ * \last parameter of curve.
+ * \return New GEOM_Object, containing the created point.
+ */
+ GEOM_Object MakeTangentOnCurve (in GEOM_Object theRefCurve,
+ in double theParameter);
+
/*!
* Create a vector with the given components.
* \param theDX X component of the vector.
GEOM_Object MakeMarker (in double theOX , in double theOY , in double theOZ,
in double theXDX, in double theXDY, in double theXDZ,
in double theYDX, in double theYDY, in double theYDZ);
+
+ /*!
+ * Create a tangent plane to specified face in the point with specified parameters.
+ * Values of parameters should be between 0. and 1.0
+ * \param theFace - face for which tangent plane shuold be built.
+ * \param theParameterU - value of parameter by U
+ * \param theParameterV - value of parameter Vthe
+ * \param theTrimSize - defines sizes of created face
+ * \return New GEOM_Object, containing the face built on tangent plane.
+ */
+ GEOM_Object MakeTangentPlaneOnFace(in GEOM_Object theFace,
+ in double theParameterU,
+ in double theParameterV,
+ in double theTrimSize);
};
interface GEOM_ITransformOperations : GEOM_IOperations
in long theMinDeg, in long theMaxDeg,
in double theTol2D, in double theTol3D,
in long theNbIter);
+
+ /*!
+ * Create a shell or solid passing through set of sections.Sections should be wires,edges or vertices.
+ * \param theSeqSections - set of specified sections.
+ * \param theModeSolid - mode defining building solid or shell
+ * \param thePreci - precision 3D used for smoothing by default 1.e-6
+ * \param theRuled - mode defining type of the result surfaces (ruled or smoothed).
+ * \return New GEOM_Object, containing the created shell or solid.
+ */
+ GEOM_Object MakeThruSections(in ListOfGO theSeqSections,
+ in boolean theModeSolid,
+ in double thePreci,
+ in boolean theRuled);
+
+ /*!
+ * Create a shape by extrusion of the profile shape along
+ * the path shape. The path shape can be a wire or an edge.
+ * the several profiles can be specified in the several locations of path.
+ * \param theSeqBases - list of Bases shape to be extruded.
+ * \param theLocations - list of locations on the path corresponding
+ * specified list of the Bases shapes. Number of locations
+ * should be equal to number of bases or list of locations can be empty.
+ * \param thePath - Path shape to extrude the base shape along it.
+ * \param theWithContact - the mode defining that the section is translated to be in
+ * contact with the spine.
+ * \param - WithCorrection - defining that the section is rotated to be
+ * orthogonal to the spine tangent in the correspondent point
+ * \return New GEOM_Object, containing the created pipe.
+ */
+ GEOM_Object MakePipeWithDifferentSections (in ListOfGO theSeqBases,
+ in ListOfGO theLocations,
+ in GEOM_Object thePath,
+ in boolean theWithContact ,
+ in boolean theWithCorrection );
+
};
/*!
GEOM_Object GetSubShape (in GEOM_Object theMainShape,
in long theID);
+ /*!
+ * Get global index of \a theSubShape in \a theMainShape.
+ * \param theMainShape Main shape.
+ * \param theSubShape Sub-shape of the main shape.
+ * \return global index of \a theSubShape in \a theMainShape.
+ */
+ long GetSubShapeIndex (in GEOM_Object theMainShape, in GEOM_Object theSubShape);
+
+ /*!
+ * Get index of \a theSubShape in \a theMainShape, unique among sub-shapes of the same type.
+ * Together with method <VAR>GetShapeTypeString()</VAR> it can be used
+ * to generate automatic names for sub-shapes, when publishing them in a study.
+ * \param theMainShape Main shape.
+ * \param theSubShape Sub-shape of the main shape.
+ * \return index of \a theSubShape in a list of all sub-shapes of \a theMainShape of the same type.
+ */
+ long GetTopologyIndex (in GEOM_Object theMainShape, in GEOM_Object theSubShape);
+
+ /*!
+ * \brief Get name of type of \a theShape.
+ *
+ * Use wide type notation, taking into consideration both topology and geometry of the shape.
+ * Together with method <VAR>GetTopologyIndex()</VAR> it can be used
+ * to generate automatic names for sub-shapes, when publishing them in a study.
+ * \param theShape The shape to get a type of.
+ * \return String, containing a type name of \a theShape.
+ */
+ string GetShapeTypeString (in GEOM_Object theShape);
+
/*!
* Count number of faces in the given shape.
* \param theShape Shape to count faces in.
in double theRadius,
in shape_state theState);
+ /*!
+ * Find in \a theShape all sub-shapes of type \a theShapeType, situated relatively
+ * the specified quadrangle by the certain way, defined through \a theState parameter.
+ * \param theShape Shape to find sub-shapes of.
+ * \param theShapeType Type of sub-shapes to be retrieved.
+ * \param theTopLeftPoint Top left quadrangle corner
+ * \param theTopRigthPoint Top right quadrangle corner
+ * \param theBottomLeftPoint Bottom left quadrangle corner
+ * \param theBottomRigthPoint Bottom right quadrangle corner
+ * \param theState The state of the subshapes to find.
+ * \return List of all found sub-shapes.
+ */
+ ListOfGO GetShapesOnQuadrangle (in GEOM_Object theShape,
+ in long theShapeType,
+ in GEOM_Object theTopLeftPoint,
+ in GEOM_Object theTopRigthPoint,
+ in GEOM_Object theBottomLeftPoint,
+ in GEOM_Object theBottomRigthPoint,
+ in shape_state theState);
+
+ /*!
+ * Find in \a theShape all sub-shapes of type \a theShapeType, situated relatively
+ * the specified plane by the certain way, defined through \a theState parameter.
+ * \param theShape Shape to find sub-shapes of.
+ * \param theShapeType Type of sub-shapes to be retrieved.
+ * \param theAx1 Vector (or line, or linear edge), specifying normal
+ * direction and location of the plane to find shapes on.
+ * \param theState The state of the subshapes to find.
+ * \return List of IDs of all found sub-shapes.
+ */
+ ListOfLong GetShapesOnPlaneIDs (in GEOM_Object theShape,
+ in long theShapeType,
+ in GEOM_Object theAx1,
+ in shape_state theState);
+
+ /*!
+ * Find in \a theShape all sub-shapes of type \a theShapeType, situated relatively
+ * the specified cylinder by the certain way, defined through \a theState parameter.
+ * \param theShape Shape to find sub-shapes of.
+ * \param theShapeType Type of sub-shapes to be retrieved.
+ * \param theAxis Vector (or line, or linear edge), specifying
+ * axis of the cylinder to find shapes on.
+ * \param theRadius Radius of the cylinder to find shapes on.
+ * \param theState The state of the subshapes to find.
+ * \return List of IDs of all found sub-shapes.
+ */
+ ListOfLong GetShapesOnCylinderIDs (in GEOM_Object theShape,
+ in long theShapeType,
+ in GEOM_Object theAxis,
+ in double theRadius,
+ in shape_state theState);
+
+ /*!
+ * Find in \a theShape all sub-shapes of type \a theShapeType, situated relatively
+ * the specified sphere by the certain way, defined through \a theState parameter.
+ * \param theShape Shape to find sub-shapes of.
+ * \param theShapeType Type of sub-shapes to be retrieved.
+ * \param theCenter Point, specifying center of the sphere to find shapes on.
+ * \param theRadius Radius of the sphere to find shapes on.
+ * \param theState The state of the subshapes to find.
+ * \return List of IDs of all found sub-shapes.
+ */
+ ListOfLong GetShapesOnSphereIDs (in GEOM_Object theShape,
+ in long theShapeType,
+ in GEOM_Object theCenter,
+ in double theRadius,
+ in shape_state theState);
+
+ /*!
+ * Find in \a theShape all sub-shapes of type \a theShapeType, situated relatively
+ * the specified quadrangle by the certain way, defined through \a theState parameter.
+ * \param theShape Shape to find sub-shapes of.
+ * \param theShapeType Type of sub-shapes to be retrieved.
+ * \param theTopLeftPoint Top left quadrangle corner
+ * \param theTopRigthPoint Top right quadrangle corner
+ * \param theBottomLeftPoint Bottom left quadrangle corner
+ * \param theBottomRigthPoint Bottom right quadrangle corner
+ * \param theState The state of the subshapes to find.
+ * \return List of IDs of all found sub-shapes.
+ */
+ ListOfLong GetShapesOnQuadrangleIDs (in GEOM_Object theShape,
+ in long theShapeType,
+ in GEOM_Object theTopLeftPoint,
+ in GEOM_Object theTopRigthPoint,
+ in GEOM_Object theBottomLeftPoint,
+ in GEOM_Object theBottomRigthPoint,
+ in shape_state theState);
+
/*!
* Get sub-shape(s) of theShapeWhere, which are
* coincident with \a theShapeWhat or could be a part of it.
* \param theDirFace2 Second direction face global index.
* \param theNbTimes Quantity of transformations to be done.
* \note Global index of sub-shape can be obtained, using method
- * <VAR>GEOM_ILocalOperations.GetSubShapeIndex()</VAR>.
+ * <VAR>GEOM_IShapesOperations.GetSubShapeIndex()</VAR>.
* \return New GEOM_Object, containing the result shape.
*/
GEOM_Object MakeMultiTransformation1D (in GEOM_Object theBlock,
* \return New GEOM_Object, containing the created wire.
*/
GEOM_Object MakeSketcher (in string theCommand, in ListOfDouble theWorkingPlane);
+
+ /*!
+ * Create a sketcher (wire or face), following the textual description,
+ * passed through \a theCommand argument. \n
+ * For format of the description string see the previous method.\n
+ * \param theCommand String, defining the sketcher in local
+ * coordinates of the working plane.
+ * \param theWorkingPlane Planar Face of the working plane.
+ * \return New GEOM_Object, containing the created wire.
+ */
+ GEOM_Object MakeSketcherOnPlane (in string theCommand, in GEOM_Object theWorkingPlane);
};
/*!
* \param theShape Shape, to perform fillet on.
* \param theR Fillet radius.
* \param theEdges Global indices of edges to perform fillet on.
- * \note Global index of sub-shape can be obtained, using method <VAR>GetSubShapeIndex()</VAR>.
+ * \note Global index of sub-shape can be obtained, using method
+ * <VAR>GEOM_IShapesOperations.GetSubShapeIndex()</VAR>.
* \return New GEOM_Object, containing the result shape.
*/
GEOM_Object MakeFilletEdges (in GEOM_Object theShape,
* \param theShape Shape, to perform fillet on.
* \param theR Fillet radius.
* \param theFaces Global indices of faces to perform fillet on.
- * \note Global index of sub-shape can be obtained, using method <VAR>GetSubShapeIndex()</VAR>.
+ * \note Global index of sub-shape can be obtained, using method
+ * <VAR>GEOM_IShapesOperations.GetSubShapeIndex()</VAR>.
* \return New GEOM_Object, containing the result shape.
*/
GEOM_Object MakeFilletFaces (in GEOM_Object theShape,
* \param theD1 Chamfer size along \a theFace1.
* \param theD2 Chamfer size along \a theFace2.
* \param theFace1,theFace2 Global indices of two faces of \a theShape.
- * \note Global index of sub-shape can be obtained, using method <VAR>GetSubShapeIndex()</VAR>.
+ * \note Global index of sub-shape can be obtained, using method
+ * <VAR>GEOM_IShapesOperations.GetSubShapeIndex()</VAR>.
* \return New GEOM_Object, containing the result shape.
*/
GEOM_Object MakeChamferEdge (in GEOM_Object theShape,
* will be get along face, which is nearer to \a theFaces beginning.
* \param theD2 Chamfer size along another of two faces, connected to the edge.
* \param theFaces Sequence of global indices of faces of \a theShape.
- * \note Global index of sub-shape can be obtained, using method <VAR>GetSubShapeIndex()</VAR>.
+ * \note Global index of sub-shape can be obtained, using method
+ * <VAR>GEOM_IShapesOperations.GetSubShapeIndex()</VAR>.
* \return New GEOM_Object, containing the result shape.
*/
GEOM_Object MakeChamferFaces (in GEOM_Object theShape,
in double theMeshDeflection);
/*!
- * Get global index of \a theSubShape in \a theShape.
- * \param theShape Main shape.
- * \param theSubShape Sub-shape of the main shape.
- * \return global index of \a theSubShape in \a theShape.
+ * Duplicates <VAR>GEOM_IShapesOperations.GetSubShapeIndex()</VAR>.
+ * Present here only for compatibility.
*/
long GetSubShapeIndex (in GEOM_Object theShape, in GEOM_Object theSubShape);
};
void GetShapeProcessParameters (out string_array theOperators,
out string_array theParameters,
out string_array theValues);
+ /*!
+ * Get parameters and parameters' values for the given Shape Process operation.
+ * In the current implementation the defaults are
+ * read from the file pointed by CSF_ShHealingDefaults environmental variable.
+ * \param theOperator Input. The operator's name.
+ * \param theParameters Output. Default list of names of parameters.
+ * \param theValues Output. List of default values of parameters, in the same order
+ * as parameters are listed in \a theParameters list.
+ */
+ void GetOperatorParameters (in string theOperator,
+ out string_array theParameters,
+ out string_array theValues);
/*!
* Remove faces from the given object (shape).
* Adds a sub object with ID theSubShapeId to the group
* \param theGroup is a GEOM group to which the new sub shape is added
* \param theSubShapeId is a sub shape ID in the main object.
- * \note Use method <VAR>ILocalOperations.GetSubShapeIndex()</VAR> to get an ID by the sub shape
+ * \note Use method <VAR>GEOM_IShapesOperations.GetSubShapeIndex()</VAR> to get an ID by the sub shape
*/
void AddObject (in GEOM_Object theGroup, in long theSubShapeId);
/*!
* Removes a sub object with ID \a theSubShapeId from the group
- * \param theGroup is a GEOM group from which the new sub shape is removed
+ * \param theGroup is a GEOM group from which the sub shape is removed.
* \param theSubShapeId is a sub shape ID in the main object.
- * \note Use method <VAR>ILocalOperations.GetSubShapeIndex()</VAR> to get an ID by the sub shape
+ * \note Use method <VAR>GEOM_IShapesOperations.GetSubShapeIndex()</VAR> to get an ID by the sub shape
*/
void RemoveObject (in GEOM_Object theGroup, in long theSubShapeId);
+ /*!
+ * Adds to the group all the given shapes. No errors, if some shapes are alredy included.
+ * \param theGroup is a GEOM group to which the new sub shapes are added.
+ * \param theSubShapes is a list of sub shapes to be added.
+ */
+ void UnionList (in GEOM_Object theGroup, in ListOfGO theSubShapes);
+
+ /*!
+ * Removes from the group all the given shapes. No errors, if some shapes are not included.
+ * \param theGroup is a GEOM group from which the sub-shapes are removed.
+ * \param theSubShapes is a list of sub-shapes to be removed.
+ */
+ void DifferenceList (in GEOM_Object theGroup, in ListOfGO theSubShapes);
+
+ /*!
+ * Adds to the group all the given shapes. No errors, if some shapes are alredy included.
+ * \param theGroup is a GEOM group to which the new sub shapes are added.
+ * \param theSubShapes is a list of IDs of sub shapes to be added.
+ */
+ void UnionIDs (in GEOM_Object theGroup, in ListOfLong theSubShapes);
+
+ /*!
+ * Removes from the group all the given shapes. No errors, if some shapes are not included.
+ * \param theGroup is a GEOM group from which the sub-shapes are removed.
+ * \param theSubShapes is a list of IDs of sub-shapes to be removed.
+ */
+ void DifferenceIDs (in GEOM_Object theGroup, in ListOfLong theSubShapes);
+
/*!
* Returns a type of sub objects stored in the group
* \param theGroup is a GEOM group which type is returned.
* \param theObject is a GEOM object which IOR is requested
*/
string GetStringFromIOR (in GEOM_Object theObject);
+
+ /*!
+ * Returns a name with which a GEOM object was dumped into python script
+ * \param theStudyEntry is an entry of the GEOM object in the study
+ */
+ string GetDumpName (in string theStudyEntry);
+
+ /*!
+ * Returns all names with which a GEOM objects was dumped
+ * into python script to avoid the same names in SMESH script
+ */
+ string_array GetAllDumpNames();
};
};
