-// Copyright (C) 2007-2015 CEA/DEN, EDF R&D, OPEN CASCADE
+// Copyright (C) 2007-2016 CEA/DEN, EDF R&D, OPEN CASCADE
//
// Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
// CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
SI_ALL // all interferences
};
+ /**
+ * This enumeration represents comparison conditions.
+ */
+ enum comparison_condition
+ {
+ CC_GT, ///< Greater then
+ CC_GE, ///< Greater then or equal to
+ CC_LT, ///< Less then
+ CC_LE ///< Less then or equal to
+ };
+
/*!
* \brief Object creation parameters
*
string operationName;
Parameters params;
};
+ typedef sequence<CreationInformation> CreationInformationSeq;
/*!
* \brief Reporting on shape healing
long GetStudyID();
/*!
- * \brief Get internal type of the object (POINT, BOX, CYLINDER, EXTRUSION...).
+ * \brief Get internal type of operation created this object (POINT, BOX, CYLINDER, EXTRUSION...).
+ * \note To get topological information on the object, use \ref GEOM_IMeasureOperations::WhatIs() "WhatIs()"
+ * or \ref GEOM_IMeasureOperations::KindOfShape() "KindOfShape()" operation.
*/
long GetType();
/*!
* \brief Return name of operation and values of parameters used for object creation
*/
- CreationInformation GetCreationInformation();
+ CreationInformationSeq GetCreationInformation();
};
//# GEOM_Object
*
* This function is useful for the compounds only; for simple shapes it
* exactly the same value as GetShapeType().
- * Note, that compounds are procesed recursively.
+ * Note, that compounds are processed recursively.
*
* \sa GetShapeType(), GetTopologyType(), GetMaxShapeType()
*/
*
* This function is useful for the compounds only; for simple shapes it
* exactly the same value as GetShapeType().
- * Note, that compounds are procesed recursively.
+ * Note, that compounds are processed recursively.
*
* \sa GetShapeType(), GetTopologyType(), GetMinShapeType()
*/
/*!
* \brief Set the operation error code
- * \param theErrorID is a string describing the error occured
+ * \param theErrorID is a string describing the error occurred
* \note This method is supposed to be used only by interfaces inheriting from IOperations.
*/
void SetErrorCode (in string theErrorID);
void StartOperation();
/*!
- * \brief Closes the previously opened trasaction
+ * \brief Closes the previously opened transaction
*/
void FinishOperation();
* Create a point, corresponding to the given parameter on the given curve.
* \param theRefCurve The referenced curve.
* \param theParameter Value of parameter on the referenced curve.
+ * \param takeOrientationIntoAccount flag that tells if it is necessary
+ * to take the curve's orientation into account.
* \return New GEOM_Object, containing the created point.
*/
GEOM_Object MakePointOnCurve (in GEOM_Object theRefCurve,
- in double theParameter);
+ in double theParameter,
+ in boolean takeOrientationIntoAccount);
/*!
* \brief Create a point, corresponding to the given length on the given curve.
/*!
* C\brief reate a line, passing through the given point
- * and parrallel to the given direction
+ * and parallel to the given direction
* \param thePnt Point. The resulting line will pass through it.
* \param theDir Direction. The resulting line will be parallel to it.
* \return New GEOM_Object, containing the created line.
* \brief Replace the given object by its offset.
* \param theObject The base object for the offset.
* \param theOffset Offset value.
+ * \param theJoinByPipes To join offset surfaces by pipes or by intersection.
* \return theObject.
*/
- GEOM_Object OffsetShape (in GEOM_Object theObject, in double theOffset);
+ GEOM_Object OffsetShape (in GEOM_Object theObject,
+ in double theOffset,
+ in boolean theJoinByPipes);
/*!
* \brief Create new object as offset of the given one.
* \param theObject The base object for the offset.
* \param theOffset Offset value.
+ * \param theJoinByPipes To join offset surfaces by pipes or by intersection.
* \return New GEOM_Object, containing the offset object.
*/
- GEOM_Object OffsetShapeCopy (in GEOM_Object theObject, in double theOffset);
+ GEOM_Object OffsetShapeCopy (in GEOM_Object theObject,
+ in double theOffset,
+ in boolean theJoinByPipes);
/*!
* \brief Create new object as projection of the given one on a 2D surface.
* \return theObject.
*/
GEOM_Object RecomputeObject (in GEOM_Object theObject);
+
+ /*!
+ * \brief Compute the projection of a wire or a face on a cylinder.
+ *
+ * This method computes a wire or a face or a compound of faces
+ * that represents a projection of the source shape onto cylinder.
+ * The cylinder's coordinate system is the same as the global coordinate
+ * system.
+ *
+ * \param theObject The object to be projected. It can be either
+ * a planar wire or a face.
+ * \param theRadius The radius of the cylinder.
+ * \param theStartAngle The starting angle from the cylinder's X axis
+ * around Z axis. The angle from which the projection is started.
+ * \param theAngleLength The projection length angle. The angle in which
+ * to project the total length of the wire. If it is negative the
+ * projection is not scaled and natural wire length is kept for
+ * the projection.
+ * \param theAngleRotation the desired angle between the tangent vector
+ * to the first curve at the first point of the theObject's
+ * projection in 2D space and U-direction of cylinder's 2D space.
+ * \return A wire or a face or a compound of faces that represents a
+ * projection of the source shape onto a cylinder.
+ */
+ GEOM_Object MakeProjectionOnCylinder (in GEOM_Object theObject,
+ in double theRadius,
+ in double theStartAngle,
+ in double theAngleLength,
+ in double theAngleRotation);
};
/*!
* \param theHeight Prism dimension along the normal of the face.
* \param theAngle Draft angel in degrees
* \param theFuse If true material is added else material is removed
+ * \param theInvert If true material changes the direction
* \return New GEOM_Object, containing the modified shape
*/
GEOM_Object MakeDraftPrism (in GEOM_Object theInitShape,
in GEOM_Object theBase,
in double theHeight,
in double theAngle,
- in boolean theFuse);
+ in boolean theFuse,
+ in boolean theInvert);
/*!
* \brief Create a shape by extrusion of the base shape along
* the path shape. The path shape can be a wire or an edge.
* \param theBase Base shape to be extruded.
* \param thePath Path shape to extrude the base shape along it.
- * \return New GEOM_Object, containing the created pipe.
+ * \param IsGenerateGroups flag that tells if it is necessary to
+ * return groups (true) or not (false).
+ * \return The list of objects. The first one is a result pipe,
+ * the other ones are the created groups. If \a IsGenerateGroups
+ * is not set the returned list contains a single object, which
+ * is the operation result.
*/
- GEOM_Object MakePipe (in GEOM_Object theBase, in GEOM_Object thePath);
+ ListOfGO MakePipe (in GEOM_Object theBase,
+ in GEOM_Object thePath,
+ in boolean IsGenerateGroups);
/*!
* \brief Create a shape by revolution of the base shape around the axis
* should be equal to number of bases or list of locations can be empty.
* \param thePath - Path shape to extrude the base shape along it.
* \param theWithContact - the mode defining that the section is translated to be in
- * contact with the spine.
+ * contact with the spine. Ignored if IsBySteps is set.
* \param theWithCorrection - defining that the section is rotated to be
- * orthogonal to the spine tangent in the correspondent point
- * \return New GEOM_Object, containing the created pipe.
- */
- GEOM_Object MakePipeWithDifferentSections (in ListOfGO theSeqBases,
- in ListOfGO theLocations,
- in GEOM_Object thePath,
- in boolean theWithContact ,
- in boolean theWithCorrection );
+ * orthogonal to the spine tangent in
+ * the correspondent point. Ignored if IsBySteps is set.
+ * \param IsBySteps - flag that tells if the result should be created
+ * step by step or as a whole. If IsBySteps is set no correction
+ * of bases is allowed.
+ * \param IsGenerateGroups flag that tells if it is necessary to
+ * return groups (true) or not (false).
+ * \return The list of objects. The first one is a result pipe,
+ * the other ones are the created groups. If \a IsGenerateGroups
+ * is not set the returned list contains a single object, which
+ * is the operation result.
+ */
+ ListOfGO MakePipeWithDifferentSections (in ListOfGO theSeqBases,
+ in ListOfGO theLocations,
+ in GEOM_Object thePath,
+ in boolean theWithContact ,
+ in boolean theWithCorrection,
+ in boolean IsBySteps,
+ in boolean IsGenerateGroups);
/*!
* \brief Create a shape by extrusion of the profile shape along
* contact with the spine.
* \param theWithCorrection - defining that the section is rotated to be
* orthogonal to the spine tangent in the correspondent point
- * \return New GEOM_Object, containing the created pipe.
- */
- GEOM_Object MakePipeWithShellSections (in ListOfGO theSeqBases,
- in ListOfGO theSeqSubBases,
- in ListOfGO theLocations,
- in GEOM_Object thePath,
- in boolean theWithContact ,
- in boolean theWithCorrection );
+ * \param IsGenerateGroups flag that tells if it is necessary to
+ * return groups (true) or not (false).
+ * \return The list of objects. The first one is a result pipe,
+ * the other ones are the created groups. If \a IsGenerateGroups
+ * is not set the returned list contains a single object, which
+ * is the operation result.
+ */
+ ListOfGO MakePipeWithShellSections (in ListOfGO theSeqBases,
+ in ListOfGO theSeqSubBases,
+ in ListOfGO theLocations,
+ in GEOM_Object thePath,
+ in boolean theWithContact,
+ in boolean theWithCorrection,
+ in boolean IsGenerateGroups);
/*!
* \brief Create solids between given sections
* \param theSeqBases - list of sections (shell or face).
* \param theLocations - list of corresponding vertexes
- * \return New GEOM_Object, containing the created solids.
+ * \param IsGenerateGroups flag that tells if it is necessary to
+ * return groups (true) or not (false).
+ * \return The list of objects. The first one is a result pipe,
+ * the other ones are the created groups. If \a IsGenerateGroups
+ * is not set the returned list contains a single object, which
+ * is the operation result.
*/
- GEOM_Object MakePipeShellsWithoutPath (in ListOfGO theSeqBases,
- in ListOfGO theLocations);
+ ListOfGO MakePipeShellsWithoutPath (in ListOfGO theSeqBases,
+ in ListOfGO theLocations,
+ in boolean IsGenerateGroups);
/*!
* \brief Create a shape by extrusion of the base shape along
* \param theBase Base shape to be extruded.
* \param thePath Path shape to extrude the base shape along it.
* \param theVec Vector defines a constant binormal direction to keep the
- * same angle beetween the Direction and the sections
+ * same angle between the Direction and the sections
* along the sweep surface.
- * \return New GEOM_Object, containing the created pipe.
- */
- GEOM_Object MakePipeBiNormalAlongVector (in GEOM_Object theBase,
- in GEOM_Object thePath,
- in GEOM_Object theVec);
+ * \param IsGenerateGroups flag that tells if it is necessary to
+ * return groups (true) or not (false).
+ * \return The list of objects. The first one is a result pipe,
+ * the other ones are the created groups. If \a IsGenerateGroups
+ * is not set the returned list contains a single object, which
+ * is the operation result.
+ */
+ ListOfGO MakePipeBiNormalAlongVector (in GEOM_Object theBase,
+ in GEOM_Object thePath,
+ in GEOM_Object theVec,
+ in boolean IsGenerateGroups);
/*!
- * \brief Make a thick solid from a surface shape (face or shell)
- * \param theObject Surface from which the thick solid is made
+ * \brief Make a thick solid from a shape.
+ *
+ * If the input is a surface shape (face or shell) the result is
+ * a thick solid. If an input shape is a solid the result is a hollowed
+ * solid with removed faces.
+ * \param theObject face or shell to get thick solid or solid to get
+ * hollowed solid.
+ * \param theFacesIDs the list of face IDs to be removed from the result.
+ * It can be empty.
* \param theThickness Value of the thickness
- * \param isCopy To make a copy of \a theObject ot to modify \a theObject.
+ * \param isCopy To make a copy of \a theObject or to modify \a theObject
+ * \param isInside If true the thickness is applied towards inside
* \return New GEOM_Object, containing the created pipe if isCopy = true
* or the modified object if isCopy = false
*/
GEOM_Object MakeThickening (in GEOM_Object theObject,
- in double theThickness,
- in boolean isCopy);
+ in ListOfLong theFacesIDs,
+ in double theThickness,
+ in boolean isCopy,
+ in boolean isInside);
/*!
* coincident with \a theShapeWhat or could be a part of it.
* \param theShapeWhere Shape to find sub-shapes of.
* \param theShapeWhat Shape, specifying what to find.
- * \return Group of all found sub-shapes or a single found sub-shape.
+ * \return Compound which includes all found sub-shapes if they have different types;
+ * or group of all found shapes of the equal type; or a single found sub-shape.
*/
GEOM_Object GetInPlace (in GEOM_Object theShapeWhere,
in GEOM_Object theShapeWhat);
*
* \param theShapeWhere Shape to find sub-shapes of.
* \param theShapeWhat Shape, specifying what to find.
- * \return Group of all found sub-shapes or a single found sub-shape.
+ * \return Compound which includes all found sub-shapes if they have different types;
+ * or group of all found shapes of the equal type; or a single found sub-shape.
*/
GEOM_Object GetInPlaceByHistory (in GEOM_Object theShapeWhere,
in GEOM_Object theShapeWhat);
ListOfGO GetSubShapeEdgeSorted (in GEOM_Object theShape,
in GEOM_Object theStartPoint);
+ /*!
+ * \brief Return the list of subshapes that satisfies a certain tolerance
+ * criterion. The user defines the type of shapes to be returned, the
+ * condition and the tolerance value. The operation is defined for
+ * faces, edges and vertices only. E.g. for theShapeType FACE, theCondition
+ * CC_GT and theTolerance 1.e-7 this method returns all faces of theShape
+ * that have tolerances greater then 1.e7.
+ *
+ * \param theShape the shape to be exploded
+ * \param theShapeType the type of shapes to be returned. Can have the
+ * values FACE, EDGE and VERTEX only.
+ * \param theCondition the condition type.
+ * \param theTolerance the tolerance filter.
+ * \return the list of shapes that satisfy the conditions.
+ */
+ ListOfGO GetSubShapesWithTolerance(in GEOM_Object theShape,
+ in short theShapeType,
+ in comparison_condition theCondition,
+ in double theTolerance);
+
+ /**
+ * This enumeration represents an extraction statistics type. It is used in
+ * the interface GEOM_IShapesOperations::MakeExtraction.
+ */
+ enum ExtractionStatType
+ {
+ EST_Removed, ///< Removed sub-shapes
+ EST_Modified, ///< Modified sub-shapes
+ EST_Added ///< Newly created sub-shapes
+ };
+
+ /*!
+ * This structure defines a format of extraction statistics. It is used in
+ * the interface GEOM_IShapesOperations::MakeExtraction.
+ */
+ struct ExtractionStat
+ {
+ ExtractionStatType type; ///< Type of extraction statistics.
+ ListOfLong indices; ///< Shape indices touched by this type of modification.
+ };
+
+ typedef sequence<ExtractionStat> ExtractionStats;
+
+ /*!
+ * \brief Return the shape that is constructed from theShape without
+ * extracted sub-shapes from the input list.
+ *
+ * \param theShape the original shape.
+ * \param theSubShapeIDs the list of sub-shape IDs to be extracted from
+ * the original shape.
+ * \param theStats the operation statistics. Output parameter.
+ * \return the shape without extracted sub-shapes.
+ */
+ GEOM_Object MakeExtraction(in GEOM_Object theShape,
+ in ListOfLong theSubShapeIDs,
+ out ExtractionStats theStats);
+
};
// # GEOM_IBlocksOperations:
*
* Propagation group is a set of all edges, opposite to one (main)
* edge of this group directly or through other opposite edges.
- * Notion of Opposite Edge make sence only on quadrangle face.
+ * Notion of Opposite Edge make sense only on quadrangle face.
* \param theShape Shape to build propagation groups on.
* \return List of GEOM_Object, each of them is a propagation group.
*/
* \param theRemoveInside Shapes, inside which the results will be deleted.
* Each shape from theRemoveInside must belong to theShapes also.
* \param theRemoveWebs If TRUE, perform Glue 3D algorithm.
- * \param theMaterials Material indices for each shape. Make sence, only if theRemoveWebs is TRUE.
+ * \param theMaterials Material indices for each shape. Make sense, only if theRemoveWebs is TRUE.
*
* \return New GEOM_Object, containing the result shapes.
*/
/*!
* \brief Perform partition operation.
*
- * This method may be usefull if it is needed to make a partition for
+ * This method may be useful if it is needed to make a partition for
* a compound containing nonintersected shapes. Performance will be better
* since intersection between shapes from compound is not performed.
*
* \param theShape Shape to be intersected.
* \param thePlane Tool shape, to intersect theShape.
* \return New GEOM_Object, containing the result shape.
+ *
+ * \note This operation is a shortcut to the more general \ref MakePartition
+ * operation, where \a theShape specifies single "object" (shape being partitioned)
+ * and \a thePlane specifies single "tool" (intersector shape). Other parameters of
+ * \ref MakePartition operation have default values:
+ * - \a theLimit: GEOM::SHAPE (shape limit corresponds to the type of \a theShape)
+ * - \a theKeepNonlimitShapes: 0
+ * - \a theKeepInside, \a theRemoveInside, \a theRemoveWebs,
+ * \a theMaterials (obsolete parameters): empty
+ *
+ * \sa MakePartition, MakePartitionNonSelfIntersectedShape
*/
GEOM_Object MakeHalfPartition (in GEOM_Object theShape,
in GEOM_Object thePlane);
* \param theVertexes Global indices of vertexes to perform fillet on.
* \note Global index of sub-shape can be obtained, using method
* <VAR>GEOM_IShapesOperations.GetSubShapeIndex()</VAR>.
- * \note The list of vertices coudl be empty, in this case fillet fill be done
+ * \note The list of vertices could be empty, in this case fillet fill be done
* at all vertices in given wire
* \param doIgnoreSecantVertices If FALSE, fillet radius is always limited
* by the length of the edges, nearest to the fillet vertex.
in double theD1, in double theD2,
in long theFace1, in long theFace2);
/*!
- * \brief The Same but with params theD = Chamfer Lenght
+ * \brief The Same but with params theD = Chamfer Length
* and theAngle = Chamfer Angle (Angle in radians)
*/
GEOM_Object MakeChamferEdgeAD (in GEOM_Object theShape,
in double theD1, in double theD2,
in ListOfLong theFaces);
/*!
- * The Same but with params theD = Chamfer Lenght
+ * The Same but with params theD = Chamfer Length
* and theAngle = Chamfer Angle (Angle in radians)
*/
GEOM_Object MakeChamferFacesAD (in GEOM_Object theShape,
in double theD1, in double theD2,
in ListOfLong theEdges);
/*!
- * The Same but with params theD = Chamfer Lenght
+ * The Same but with params theD = Chamfer Length
* and theAngle = Chamfer Angle (Angle in radians)
*/
GEOM_Object MakeChamferEdgesAD (in GEOM_Object theShape,
* \param theObjects Shapes to get free boundary of.
* \param theClosedWires Output. Closed wires on the free boundary of the given shape.
* \param theOpenWires Output. Open wires on the free boundary of the given shape.
- * \return FALSE, if an error(s) occured during the method execution.
+ * \return FALSE, if an error(s) occurred during the method execution.
*/
boolean GetFreeBoundary (in ListOfGO theObjects,
out ListOfGO theClosedWires,
SALOMEDS::TMPFile GetTexture(in long theID, out long theWidth, out long theHeight);
/*!
- * \brief Get list of all avaiable texture IDs
- * \return list of all texture IDs avaiable for the current study
+ * \brief Get list of all available texture IDs
+ * \return list of all texture IDs available for the current study
*/
ListOfLong GetAllTextures();
};
/*!
- * \brief Sequence of non-topological information tranfer data.
+ * \brief Sequence of non-topological information transfer data.
*/
typedef sequence<TransferDatum> ListOfTransferDatum;
* \param theResult statistics of the operation. Output parameter. It
* represents a sequence of Transfer Datum. A datum has the type
* (string code), the total number of items of this type and
- * the number of transfered items.
+ * the number of transferred items.
* \return true in case of success; otherwise false.
*/
boolean TransferData(in GEOM_Object theObjectFrom,
// VERTEX
VERTEX,
// ADVANCED shapes
+ LCS,
/*! all advanced shapes (temporary implementation) */
ADVANCED
};
* \brief Get summarized length of all wires,
* area of surface and volume of the given shape.
* \param theShape Shape to define properties of.
+ * \param theTolerance maximal relative error of area and volume computation.
* \param theLength Output. Summarized length of all wires of the given shape.
* \param theSurfArea Output. Area of surface of the given shape.
* \param theVolume Output. Volume of the given shape.
* \return Returns shape properties through the last three arguments.
*/
void GetBasicProperties (in GEOM_Object theShape,
+ in double theTolerance,
out double theLength,
out double theSurfArea,
out double theVolume);
in long theCheckLevel,
out ListOfLong theIntersections);
+ /*!
+ * \brief Detect self-intersections of the given shape with algorithm based on mesh intersections.
+ * \param theShape Shape to check validity of.
+ * \param theDeflection Linear deflection coefficient that specifies quality of tessellation.
+ * \param theTolerance Specifies a distance between sub-shapes used for detecting gaps:
+ * - if \a theTolerance <= 0, algorithm detects intersections
+ * - if \a theTolerance > 0, algorithm detects gaps
+ * \param theIntersections Output. List of intersected sub-shapes IDs, it contains pairs of IDs.
+ * \return TRUE, if the shape does not have any self-intersections.
+ */
+ boolean CheckSelfIntersectionsFast (in GEOM_Object theShape,
+ in float theDeflection,
+ in double theTolerance,
+ out ListOfLong theIntersections);
+
+ /*!
+ * \brief Check boolean and partition operations arguments.
+ * \param theShape the argument of an operation to be checked.
+ * \return TRUE if the argument is valid for a boolean or partition
+ * operation; FALSE otherwise.
+ */
+ boolean CheckBOPArguments (in GEOM_Object theShape);
+
/*!
* \brief Detect intersections of the given shapes with algorithm based on mesh intersections.
* \param theShape1 First source object
* \param theTolerance Specifies a distance between shapes used for detecting gaps:
* - if \a theTolerance <= 0, algorithm detects intersections
* - if \a theTolerance > 0, algorithm detects gaps
- * \param theDeflection Linear deflection coefficient that specifies quality of tesselation:
+ * \param theDeflection Linear deflection coefficient that specifies quality of tessellation:
* - if \a theDeflection <= 0, default deflection 0.001 is used
* \param theIntersections1 Output: contains list of sub-shapes IDs from 1st shape that localize intersection
* \param theIntersections2 Output: contains list of sub-shapes IDs from 2nd shape that localize intersection
* in place of sub-shapes of the first argument,
* because the whole shape corresponds to the first argument.
* Mainly to be used after transformations, but it also can be
- * usefull after partition with one object shape, and some other
+ * useful after partition with one object shape, and some other
* operations, where only the first argument has to be considered.
* If theObject has only one argument shape, this flag is automatically
* considered as True, not regarding really passed value.
* in place of sub-shapes of the first argument,
* because the whole shape corresponds to the first argument.
* Mainly to be used after transformations, but it also can be
- * usefull after partition with one object shape, and some other
+ * useful after partition with one object shape, and some other
* operations, where only the first argument has to be considered.
* If theObject has only one argument shape, this flag is automatically
* considered as True, not regarding really passed value.
* in place of sub-shapes of the first argument,
* because the whole shape corresponds to the first argument.
* Mainly to be used after transformations, but it also can be
- * usefull after partition with one object shape, and some other
+ * useful after partition with one object shape, and some other
* operations, where only the first argument has to be considered.
* If theObject has only one argument shape, this flag is automatically
* considered as True, not regarding really passed value.
/*!
* \brief Returns a GEOM_Object defined by its IOR
- * \param theIOR a string containg an IOR of the requested GEOM_Object
+ * \param theIOR a string containing an IOR of the requested GEOM_Object
*/
GEOM_Object GetIORFromString (in string theIOR);
