SI_ALL // all interferences
};
+ /**
+ * This enumeration represents comparison conditions.
+ */
+ enum comparison_condition
+ {
+ CC_GT, ///< Greater then
+ CC_GE, ///< Greater then or equal to
+ CC_LT, ///< Less then
+ CC_LE ///< Less then or equal to
+ };
+
/*!
* \brief Object creation parameters
*
string operationName;
Parameters params;
};
+ typedef sequence<CreationInformation> CreationInformationSeq;
/*!
* \brief Reporting on shape healing
long GetStudyID();
/*!
- * \brief Get internal type of the object (POINT, BOX, CYLINDER, EXTRUSION...).
+ * \brief Get internal type of operation created this object (POINT, BOX, CYLINDER, EXTRUSION...).
+ * \note To get topological information on the object, use \ref GEOM_IMeasureOperations::WhatIs() "WhatIs()"
+ * or \ref GEOM_IMeasureOperations::KindOfShape() "KindOfShape()" operation.
*/
long GetType();
/*!
* \brief Return name of operation and values of parameters used for object creation
*/
- CreationInformation GetCreationInformation();
+ CreationInformationSeq GetCreationInformation();
};
//# GEOM_Object
* Create a point, corresponding to the given parameter on the given curve.
* \param theRefCurve The referenced curve.
* \param theParameter Value of parameter on the referenced curve.
+ * \param takeOrientationIntoAccount flag that tells if it is necessary
+ * to take the curve's orientation into account.
* \return New GEOM_Object, containing the created point.
*/
GEOM_Object MakePointOnCurve (in GEOM_Object theRefCurve,
- in double theParameter);
+ in double theParameter,
+ in boolean takeOrientationIntoAccount);
/*!
* \brief Create a point, corresponding to the given length on the given curve.
* \return theObject.
*/
GEOM_Object RecomputeObject (in GEOM_Object theObject);
+
+ /*!
+ * \brief Compute the projection of a wire or a face on a cylinder.
+ *
+ * This method computes a wire or a face or a compound of faces
+ * that represents a projection of the source shape onto cylinder.
+ * The cylinder's coordinate system is the same as the global coordinate
+ * system.
+ *
+ * \param theObject The object to be projected. It can be either
+ * a planar wire or a face.
+ * \param theRadius The radius of the cylinder.
+ * \param theStartAngle The starting angle from the cylinder's X axis
+ * around Z axis. The angle from which the projection is started.
+ * \param theAngleLength The projection length angle. The angle in which
+ * to project the total length of the wire. If it is negative the
+ * projection is not scaled and natural wire length is kept for
+ * the projection.
+ * \param theAngleRotation the desired angle between the tangent vector
+ * to the first curve at the first point of the theObject's
+ * projection in 2D space and U-direction of cylinder's 2D space.
+ * \return A wire or a face or a compound of faces that represents a
+ * projection of the source shape onto a cylinder.
+ */
+ GEOM_Object MakeProjectionOnCylinder (in GEOM_Object theObject,
+ in double theRadius,
+ in double theStartAngle,
+ in double theAngleLength,
+ in double theAngleRotation);
};
/*!
* \param theHeight Prism dimension along the normal of the face.
* \param theAngle Draft angel in degrees
* \param theFuse If true material is added else material is removed
+ * \param theInvert If true material changes the direction
* \return New GEOM_Object, containing the modified shape
*/
GEOM_Object MakeDraftPrism (in GEOM_Object theInitShape,
in GEOM_Object theBase,
in double theHeight,
in double theAngle,
- in boolean theFuse);
+ in boolean theFuse,
+ in boolean theInvert);
/*!
* \brief Create a shape by extrusion of the base shape along
* the path shape. The path shape can be a wire or an edge.
* \param theBase Base shape to be extruded.
* \param thePath Path shape to extrude the base shape along it.
- * \return New GEOM_Object, containing the created pipe.
+ * \param IsGenerateGroups flag that tells if it is necessary to
+ * return groups (true) or not (false).
+ * \return The list of objects. The first one is a result pipe,
+ * the other ones are the created groups. If \a IsGenerateGroups
+ * is not set the returned list contains a single object, which
+ * is the operation result.
*/
- GEOM_Object MakePipe (in GEOM_Object theBase, in GEOM_Object thePath);
+ ListOfGO MakePipe (in GEOM_Object theBase,
+ in GEOM_Object thePath,
+ in boolean IsGenerateGroups);
/*!
* \brief Create a shape by revolution of the base shape around the axis
* should be equal to number of bases or list of locations can be empty.
* \param thePath - Path shape to extrude the base shape along it.
* \param theWithContact - the mode defining that the section is translated to be in
- * contact with the spine.
+ * contact with the spine. Ignored if IsBySteps is set.
* \param theWithCorrection - defining that the section is rotated to be
- * orthogonal to the spine tangent in the correspondent point
- * \return New GEOM_Object, containing the created pipe.
- */
- GEOM_Object MakePipeWithDifferentSections (in ListOfGO theSeqBases,
- in ListOfGO theLocations,
- in GEOM_Object thePath,
- in boolean theWithContact ,
- in boolean theWithCorrection );
+ * orthogonal to the spine tangent in
+ * the correspondent point. Ignored if IsBySteps is set.
+ * \param IsBySteps - flag that tells if the result should be created
+ * step by step or as a whole. If IsBySteps is set no correction
+ * of bases is allowed.
+ * \param IsGenerateGroups flag that tells if it is necessary to
+ * return groups (true) or not (false).
+ * \return The list of objects. The first one is a result pipe,
+ * the other ones are the created groups. If \a IsGenerateGroups
+ * is not set the returned list contains a single object, which
+ * is the operation result.
+ */
+ ListOfGO MakePipeWithDifferentSections (in ListOfGO theSeqBases,
+ in ListOfGO theLocations,
+ in GEOM_Object thePath,
+ in boolean theWithContact ,
+ in boolean theWithCorrection,
+ in boolean IsBySteps,
+ in boolean IsGenerateGroups);
/*!
* \brief Create a shape by extrusion of the profile shape along
* contact with the spine.
* \param theWithCorrection - defining that the section is rotated to be
* orthogonal to the spine tangent in the correspondent point
- * \return New GEOM_Object, containing the created pipe.
- */
- GEOM_Object MakePipeWithShellSections (in ListOfGO theSeqBases,
- in ListOfGO theSeqSubBases,
- in ListOfGO theLocations,
- in GEOM_Object thePath,
- in boolean theWithContact ,
- in boolean theWithCorrection );
+ * \param IsGenerateGroups flag that tells if it is necessary to
+ * return groups (true) or not (false).
+ * \return The list of objects. The first one is a result pipe,
+ * the other ones are the created groups. If \a IsGenerateGroups
+ * is not set the returned list contains a single object, which
+ * is the operation result.
+ */
+ ListOfGO MakePipeWithShellSections (in ListOfGO theSeqBases,
+ in ListOfGO theSeqSubBases,
+ in ListOfGO theLocations,
+ in GEOM_Object thePath,
+ in boolean theWithContact,
+ in boolean theWithCorrection,
+ in boolean IsGenerateGroups);
/*!
* \brief Create solids between given sections
* \param theSeqBases - list of sections (shell or face).
* \param theLocations - list of corresponding vertexes
- * \return New GEOM_Object, containing the created solids.
+ * \param IsGenerateGroups flag that tells if it is necessary to
+ * return groups (true) or not (false).
+ * \return The list of objects. The first one is a result pipe,
+ * the other ones are the created groups. If \a IsGenerateGroups
+ * is not set the returned list contains a single object, which
+ * is the operation result.
*/
- GEOM_Object MakePipeShellsWithoutPath (in ListOfGO theSeqBases,
- in ListOfGO theLocations);
+ ListOfGO MakePipeShellsWithoutPath (in ListOfGO theSeqBases,
+ in ListOfGO theLocations,
+ in boolean IsGenerateGroups);
/*!
* \brief Create a shape by extrusion of the base shape along
* \param theVec Vector defines a constant binormal direction to keep the
* same angle beetween the Direction and the sections
* along the sweep surface.
- * \return New GEOM_Object, containing the created pipe.
- */
- GEOM_Object MakePipeBiNormalAlongVector (in GEOM_Object theBase,
- in GEOM_Object thePath,
- in GEOM_Object theVec);
+ * \param IsGenerateGroups flag that tells if it is necessary to
+ * return groups (true) or not (false).
+ * \return The list of objects. The first one is a result pipe,
+ * the other ones are the created groups. If \a IsGenerateGroups
+ * is not set the returned list contains a single object, which
+ * is the operation result.
+ */
+ ListOfGO MakePipeBiNormalAlongVector (in GEOM_Object theBase,
+ in GEOM_Object thePath,
+ in GEOM_Object theVec,
+ in boolean IsGenerateGroups);
/*!
* It can be empty.
* \param theThickness Value of the thickness
* \param isCopy To make a copy of \a theObject or to modify \a theObject
+ * \param isInside If true the thickness is applied towards inside
* \return New GEOM_Object, containing the created pipe if isCopy = true
* or the modified object if isCopy = false
*/
GEOM_Object MakeThickening (in GEOM_Object theObject,
in ListOfLong theFacesIDs,
in double theThickness,
- in boolean isCopy);
+ in boolean isCopy,
+ in boolean isInside);
/*!
* coincident with \a theShapeWhat or could be a part of it.
* \param theShapeWhere Shape to find sub-shapes of.
* \param theShapeWhat Shape, specifying what to find.
- * \return Group of all found sub-shapes or a single found sub-shape.
+ * \return Compound which includes all found sub-shapes if they have different types;
+ * or group of all found shapes of the equal type; or a single found sub-shape.
*/
GEOM_Object GetInPlace (in GEOM_Object theShapeWhere,
in GEOM_Object theShapeWhat);
*
* \param theShapeWhere Shape to find sub-shapes of.
* \param theShapeWhat Shape, specifying what to find.
- * \return Group of all found sub-shapes or a single found sub-shape.
+ * \return Compound which includes all found sub-shapes if they have different types;
+ * or group of all found shapes of the equal type; or a single found sub-shape.
*/
GEOM_Object GetInPlaceByHistory (in GEOM_Object theShapeWhere,
in GEOM_Object theShapeWhat);
ListOfGO GetSubShapeEdgeSorted (in GEOM_Object theShape,
in GEOM_Object theStartPoint);
+ /*!
+ * \brief Return the list of subshapes that satisfies a certain tolerance
+ * criterion. The user defines the type of shapes to be returned, the
+ * condition and the tolerance value. The operation is defined for
+ * faces, edges and vertices only. E.g. for theShapeType FACE, theCondition
+ * CC_GT and theTolerance 1.e-7 this method returns all faces of theShape
+ * that have tolerances greater then 1.e7.
+ *
+ * \param theShape the shape to be exploded
+ * \param theShapeType the type of shapes to be returned. Can have the
+ * values FACE, EDGE and VERTEX only.
+ * \param theCondition the condition type.
+ * \param theTolerance the tolerance filter.
+ * \return the list of shapes that satisfy the conditions.
+ */
+ ListOfGO GetSubShapesWithTolerance(in GEOM_Object theShape,
+ in short theShapeType,
+ in comparison_condition theCondition,
+ in double theTolerance);
+
};
// # GEOM_IBlocksOperations:
// VERTEX
VERTEX,
// ADVANCED shapes
+ LCS,
/*! all advanced shapes (temporary implementation) */
ADVANCED
};
in long theCheckLevel,
out ListOfLong theIntersections);
+ /*!
+ * \brief Detect self-intersections of the given shape with algorithm based on mesh intersections.
+ * \param theShape Shape to check validity of.
+ * \param theDeflection Linear deflection coefficient that specifies quality of tesselation.
+ * \param theTolerance Specifies a distance between sub-shapes used for detecting gaps:
+ * - if \a theTolerance <= 0, algorithm detects intersections
+ * - if \a theTolerance > 0, algorithm detects gaps
+ * \param theIntersections Output. List of intersected sub-shapes IDs, it contains pairs of IDs.
+ * \return TRUE, if the shape does not have any self-intersections.
+ */
+ boolean CheckSelfIntersectionsFast (in GEOM_Object theShape,
+ in float theDeflection,
+ in double theTolerance,
+ out ListOfLong theIntersections);
+
/*!
* \brief Detect intersections of the given shapes with algorithm based on mesh intersections.
* \param theShape1 First source object