/*!
* Get the TopoDS_Shape, for colocated case only.
*/
- long getShape();
+ long long getShape();
/*!
######################################################################
/*!
* Create a plane, similar to the existing one, but with another size of representing face.
- * \param theFace Referenced plane.
+ * \param theFace Referenced plane or LCS(Marker).
* \param theTrimSize New half size of a side of quadrangle face, representing the plane.
* \return New GEOM_Object, containing the created plane.
*/
in double theStep2,
in long theNbTimes2);
+ /*!
+ * Rotate given object around vector perpendicular to plane containing three points.
+ * \param theObject The object to be rotated.
+ * \param theCentPoint central point - the axis is the vector perpendicular to the plane
+ * containing the three points.
+ * \param thePoint1 and thePoint2 - in a perpendicular plan of the axis.
+ * \return theObject.
+ */
+ GEOM_Object RotateThreePoints (in GEOM_Object theObject,
+ in GEOM_Object theCentPoint,
+ in GEOM_Object thePoint1,
+ in GEOM_Object thePoint2);
+
+
+ /*!
+ * Rotate given object around vector perpendicular to plane containing three points.
+ * Creating its copy before the rotatation.
+ * \param theObject The object to be rotated.
+ * \param theCentPoint central point - the axis is the vector perpendicular to the plane
+ * containing the three points.
+ * \param thePoint1 and thePoint2 - in a perpendicular plan of the axis.
+ * \return New GEOM_Object, containing the rotated object.
+ */
+ GEOM_Object RotateThreePointsCopy (in GEOM_Object theObject,
+ in GEOM_Object theCentPoint,
+ in GEOM_Object thePoint1,
+ in GEOM_Object thePoint2);
+
/*!
* Rotate the given object around the given axis on the given angle.
* \param theObject The object to be rotated.
in GEOM_Object theAxis,
in double theAngle);
+
/*!
* Rotate the given object around the given axis
* on the given angle, creating its copy before the rotatation.
in GEOM_Object theAxis,
in double theAngle);
+
/*!
* Rotate the given object around the given axis a given number times.
* Rotation angle will be 2*PI/theNbTimes.
in double theFactor);
/*!
- * Modify the Location of the given object by LCS
+ * Modify the Location of the given object by LCS.
+ * \param theObject The object to be displaced.
+ * \param theStartLCS Coordinate system to perform displacement from it.
+ * If \a theStartLCS is NULL, displacement
+ * will be performed from global CS.
+ * If \a theObject itself is used as \a theStartLCS,
+ * its location will be changed to \a theEndLCS.
+ * \param theEndLCS Coordinate system to perform displacement to it.
+ * \return theObject.
*/
GEOM_Object PositionShape (in GEOM_Object theObject,
in GEOM_Object theStartLCS,
in GEOM_Object theEndLCS);
/*!
- * Modify the Location of the given object by LCS
- * creating its copy before the setting
+ * Modify the Location of the given object by LCS,
+ * creating its copy before the setting.
+ * \param theObject The object to be displaced.
+ * \param theStartLCS Coordinate system to perform displacement from it.
+ * If \a theStartLCS is NULL, displacement
+ * will be performed from global CS.
+ * If \a theObject itself is used as \a theStartLCS,
+ * its location will be changed to \a theEndLCS.
+ * \param theEndLCS Coordinate system to perform displacement to it.
+ * \return New GEOM_Object, containing the displaced shape.
*/
GEOM_Object PositionShapeCopy (in GEOM_Object theObject,
in GEOM_Object theStartLCS,
/*!
* Create a face on the given wire.
- * \param theWire Wire to build the face on.
+ * \param theWire closed Wire or Edge to build the face on.
* \param isPlanarWanted If TRUE, only planar face will be built.
* If impossible, NULL object will be returned.
* \return New GEOM_Object, containing the created face.
/*!
* Create a face on the given wires set.
- * \param theWires List of wires to build the face on.
+ * \param theWires List of closed wires or edges to build the face on.
* \param isPlanarWanted If TRUE, only planar face will be built.
* If impossible, NULL object will be returned.
* \return New GEOM_Object, containing the created face.
in long theShapeType,
in GEOM_Object theAx1,
in shape_state theState);
+ /*!
+ * Find in \a theShape all sub-shapes of type \a theShapeType, situated relatively
+ * the specified plane by the certain way, defined through \a theState parameter.
+ * \param theShape Shape to find sub-shapes of.
+ * \param theShapeType Type of sub-shapes to be retrieved.
+ * \param theAx1 Vector (or line, or linear edge), specifying normal
+ * direction of the plane to find shapes on.
+ * \param thePnt Point specifying location of the plane to find shapes on.
+ * \param theState The state of the subshapes to find.
+ * \return List of all found sub-shapes.
+ */
+ ListOfGO GetShapesOnPlaneWithLocation (in GEOM_Object theShape,
+ in long theShapeType,
+ in GEOM_Object theAx1,
+ in GEOM_Object thePnt,
+ in shape_state theState);
+
+
/*!
* Find in \a theShape all sub-shapes of type \a theShapeType, situated relatively
in long theShapeType,
in GEOM_Object theAx1,
in shape_state theState);
+
+ /*!
+ * Find in \a theShape all sub-shapes of type \a theShapeType, situated relatively
+ * the specified plane by the certain way, defined through \a theState parameter.
+ * \param theShape Shape to find sub-shapes of.
+ * \param theShapeType Type of sub-shapes to be retrieved.
+ * \param theAx1 Vector (or line, or linear edge), specifying normal
+ * direction of the plane to find shapes on.
+ * \param thePnt Point specifying location of the plane to find shapes on.
+ * \param theState The state of the subshapes to find.
+ * \return List of IDs of all found sub-shapes.
+ */
+ ListOfLong GetShapesOnPlaneWithLocationIDs (in GEOM_Object theShape,
+ in long theShapeType,
+ in GEOM_Object theAx1,
+ in GEOM_Object thePnt,
+ in shape_state theState);
/*!
* Find in \a theShape all sub-shapes of type \a theShapeType, situated relatively
in GEOM_Object theBottomRigthPoint,
in shape_state theState);
+ /*!
+ * \brief Find subshapes complying with given status
+ * \param theBox - the box to check state of subshapes against
+ * \param theShape - the shape to explore
+ * \param theShapeType - type of subshape of theShape
+ * \param theState - required state
+ * \return List of IDs of all found sub-shapes.
+ */
+ ListOfLong GetShapesOnBoxIDs (in GEOM_Object theBox,
+ in GEOM_Object theShape,
+ in long theShapeType,
+ in shape_state theState);
+
+ /*!
+ * \brief Find subshapes complying with given status
+ * \param theBox - the box to check state of subshapes against
+ * \param theShape - the shape to explore
+ * \param theShapeType - type of subshape of theShape
+ * \param theState - required state
+ * \return List of all found sub-shapes.
+ */
+ ListOfGO GetShapesOnBox (in GEOM_Object theBox,
+ in GEOM_Object theShape,
+ in long theShapeType,
+ in shape_state theState);
+
/*!
* Get sub-shape(s) of theShapeWhere, which are
* coincident with \a theShapeWhat or could be a part of it.
*/
GEOM_Object GetInPlace (in GEOM_Object theShapeWhere,
in GEOM_Object theShapeWhat);
+
+ /*!
+ * Get sub-shape of theShapeWhere, which are
+ * coincident with \a theShapeWhat that can either SOLID, FACE, EDGE or VERTEX.
+ * \param theShapeWhere Shape to find sub-shapes of.
+ * \param theShapeWhat Shape, specifying what to find.
+ * \return found sub-shape.
+ */
+ GEOM_Object GetSame (in GEOM_Object theShapeWhere,
+ in GEOM_Object theShapeWhat);
};
/*!
* Perform partition operation.
* \param theShapes Shapes to be intersected.
* \param theTools Shapes to intersect theShapes.
+ * \note Each compound from ListShapes and ListTools will be exploded in order
+ * to avoid possible intersection between shapes from this compound.
+ * \param theLimit Type of resulting shapes (corresponding to TopAbs_ShapeEnum).
+ *
+ * After implementation new version of PartitionAlgo (October 2006)
+ * other parameters are ignored by current functionality. They are kept
+ * in this function only for supporting old versions.
+ * Ignored parameters:
* \param theKeepInside Shapes, outside which the results will be deleted.
* Each shape from theKeepInside must belong to theShapes also.
* \param theRemoveInside Shapes, inside which the results will be deleted.
* Each shape from theRemoveInside must belong to theShapes also.
- * \param theLimit Type of resulting shapes (corresponding to TopAbs_ShapeEnum).
* \param theRemoveWebs If TRUE, perform Glue 3D algorithm.
* \param theMaterials Material indices for each shape. Make sence, only if theRemoveWebs is TRUE.
+ *
* \return New GEOM_Object, containing the result shapes.
*/
GEOM_Object MakePartition (in ListOfGO theShapes,
in boolean theRemoveWebs,
in ListOfLong theMaterials);
+ /*!
+ * Perform partition operation.
+ * This method may be usefull if it is needed to make a partition for
+ * a compound containing nonintersected shapes. Performance will be better
+ * since intersection between shapes from compound is not performed.
+ *
+ * Description of all parameters as in previous method MakePartition()
+ *
+ * \note Passed compounds (via ListShapes or via ListTools)
+ * have to consist of nonintersecting shapes.
+ *
+ * \return New GEOM_Object, containing the result shapes.
+ */
+ GEOM_Object MakePartitionNonSelfIntersectedShape (in ListOfGO theShapes,
+ in ListOfGO theTools,
+ in ListOfGO theKeepInside,
+ in ListOfGO theRemoveInside,
+ in short theLimit,
+ in boolean theRemoveWebs,
+ in ListOfLong theMaterials);
+
/*!
* Perform partition of the Shape with the Plane
* \param theShape Shape to be intersected.
* For format of the description string see the previous method.\n
* \param theCommand String, defining the sketcher in local
* coordinates of the working plane.
- * \param theWorkingPlane Planar Face of the working plane.
+ * \param theWorkingPlane Planar Face or LCS(Marker) of the working plane.
* \return New GEOM_Object, containing the created wire.
*/
GEOM_Object MakeSketcherOnPlane (in string theCommand, in GEOM_Object theWorkingPlane);
*/
interface GEOM_IMeasureOperations : GEOM_IOperations
{
+ /*!
+ * Get position (LCS) of theShape.
+ * \param theShape Shape to calculate position of.
+ * \param Ox,Oy,Oz Output. Coordinates of shape's location origin.
+ * Origin of the LCS is situated at the shape's center of mass.
+ * \param Zx,Zy,Zz Output. Coordinates of shape's location normal(main) direction.
+ * \param Xx,Xy,Xz Output. Coordinates of shape's location X direction.
+ * Axes of the LCS are obtained from shape's location or,
+ * if the shape is a planar face, from position of its plane.
+ * \return Returns position of the shape through the last nine arguments.
+ */
+ void GetPosition (in GEOM_Object theShape,
+ out double Ox, out double Oy, out double Oz,
+ out double Zx, out double Zy, out double Zz,
+ out double Xx, out double Xy, out double Xz);
+
/*!
* Get summarized length of all wires,
* area of surface and volume of the given shape.
