*/
enum shape_type
{
- /*! */
+ /*! A collection of arbitrary shapes */
COMPOUND,
/*! A collection of solids */
COMPSOLID,
SOLID,
/*! A collection of faces connected by some edges of their wire boundaries */
SHELL,
- /*! Part of a plane (in 2D geometry) or a surface (in 3D geometry) bounded by a close wire */
+ /*! Part of a plane (in 2D geometry) or a surface (in 3D geometry) bounded by a closed wire */
FACE,
- /*! A sequence of edges connected by their vertices */
+ /*! A sequence of edges connected by their vertices */
WIRE,
/*! Edge, a shape corresponding to a curve, and bound by a vertex at each extremity */
EDGE,
/*! A zero-dimensional shape corresponding to a point in geometry */
VERTEX,
- /*! */
- SHAPE };
+ /*! Arbitrary shape in a Compound (used for processing of Compounds in some operations) */
+ SHAPE,
+ /*! Flat (top-level) contents of a Compound (used for processing of Compounds in some operations) */
+ FLAT
+ };
/*!
* \brief Marker type
/*!
* \brief Kind of the curves.
*
- * Used in the functions GEOM_ICurvesOperations.MakeCurveParametric(), GEOM_ICurvesOperations.MakeCurveParametricNew()
+ * Used in the functions GEOM_ICurvesOperations.MakeCurveParametric(), GEOM_ICurvesOperations.MakeCurveParametricNew(),
+ * GEOM_ICurvesOperations.MakePolyline2D, GEOM_ICurvesOperations.MakePolyline2DOnPlane.
*/
enum curve_type {
/*! Polyline curve */
Interpolation
};
- /*!
- * \brief Pattern for block division of the disk
- *
- * Used in the functions GEOM_IAdvancedOperations.MakeDividedDisk(), GEOM_ICurvesOperations.MakeDividedDiskPntVecR()
- */
- enum pattern {
- /*! Square */
- SQUARE,
-
- /*! Hexagon */
- HEXAGON
- };
-
/*!
* \brief Type of field data
*/
FDT_String
};
+ /**
+ * This enumeration represents the level of checking shape on
+ * self-interference. It defines which interferferences will be checked.
+ */
+ enum si_check_level
+ {
+ SI_V_V, // only V/V interferences
+ SI_V_E, // V/V and V/E interferences
+ SI_E_E, // V/V, V/E and E/E interferences
+ SI_V_F, // V/V, V/E, E/E and V/F interferences
+ SI_E_F, // V/V, V/E, E/E, V/F and E/F interferences
+ SI_ALL // all interferences
+ };
+
/*!
* \brief Object creation parameters
};
- typedef sequence<string> string_array;
- typedef sequence<short> short_array;
- typedef sequence<boolean> ListOfBool;
- typedef sequence<long> ListOfLong;
- typedef sequence<double> ListOfDouble;
+ typedef sequence<string> string_array;
+ typedef sequence<short> short_array;
+ typedef sequence<boolean> ListOfBool;
+ typedef sequence<long> ListOfLong;
+ typedef sequence<double> ListOfDouble;
+ typedef sequence<ListOfDouble> ListOfListOfDouble;
interface GEOM_Object;
interface GEOM_BaseObject;
*/
GEOM_Object MakeCylinderRH (in double theR, in double theH);
+ /*!
+ * \brief Create a portion of cylinder with given radius, height and angle at
+ * the origin of coordinate system.
+ *
+ * Axis of the cylinder will be collinear to the OZ axis of the coordinate system.
+ * \param theR Cylinder radius.
+ * \param theH Cylinder height.
+ * \param theA Cylinder angle.
+ * \return New GEOM_Object, containing the created cylinder.
+ */
+ GEOM_Object MakeCylinderRHA (in double theR, in double theH, in double theA);
+
/*!
* \brief Create a cylinder with given base point, axis, radius and height.
* \param thePnt Central point of cylinder base.
in GEOM_Object theAxis,
in double theR,
in double theH);
+ /*!
+ * \brief Create a portion of cylinder with given base point, axis, radius, height and angle.
+ * \param thePnt Central point of cylinder base.
+ * \param theAxis Cylinder axis.
+ * \param theR Cylinder radius.
+ * \param theH Cylinder height.
+ * \param theA Cylinder angle.
+ * \return New GEOM_Object, containing the created cylinder.
+ */
+ GEOM_Object MakeCylinderPntVecRHA (in GEOM_Object thePnt,
+ in GEOM_Object theAxis,
+ in double theR,
+ in double theH,
+ in double theA);
/*!
* \brief Create a cone with given height and radiuses at
in double theAngle);
/*!
- * \brief Create a filling from the given compound of contours.
- * \param theShape Initial shape on which to perform the feature.
- * \param theMinDeg a minimal degree of BSpline surface to create
- * \param theMaxDeg a maximal degree of BSpline surface to create
- * \param theTol2D a 2d tolerance to be reached
- * \param theTol3D a 3d tolerance to be reached
- * \param theNbIter a number of iteration of approximation algorithm
+ * \brief Create a face from a given set of contours.
+ * \param theContours either a list or a compound of edges/wires.
+ * \param theMinDeg a minimal degree of BSpline surface to create.
+ * \param theMaxDeg a maximal degree of BSpline surface to create.
+ * \param theTol2D a 2d tolerance to be reached.
+ * \param theTol3D a 3d tolerance to be reached.
+ * \param theNbIter a number of iteration of approximation algorithm.
* \param theMethod Kind of method to perform filling operation.
- * \param theApprox Boolean indicating if result should be approximated
- * \return New GEOM_Object, containing the created filling surface.
+ * \param theApprox Boolean indicating if result should be approximated.
+ * \return New GEOM_Object (face), containing the created filling surface.
*/
- GEOM_Object MakeFilling (in GEOM_Object theShape,
+ GEOM_Object MakeFilling (in ListOfGO theContours,
in long theMinDeg, in long theMaxDeg,
in double theTol2D, in double theTol3D,
in long theNbIter,
*/
GEOM_Object MakeFaceWires (in ListOfGO theWires, in boolean isPlanarWanted);
+ /**
+ * \brief Create a face based on surface of theFace limited by theWire.
+ * \param theFace the face whose surface is used to create a new face.
+ * \param theWire closed Wire build the face.
+ * \return New GEOM_Object, containing the created face.
+ */
+ GEOM_Object MakeFaceFromSurface(in GEOM_Object theFace,
+ in GEOM_Object theWire);
+
/*!
* \brief Create a shell from the set of faces and shells.
* \param theFacesAndShells List of faces and/or shells.
GEOM_Object MakeCompound (in ListOfGO theShapes);
/*!
- * \brief Replace coincident faces in theShape by one face.
- * \param theShape Initial shape.
+ * \brief Make a solid (or solids) from connected set of faces and/or shells.
+ * \param theFacesOrShells List of faces and/or shells.
+ * \param isIntersect If TRUE, forces performing intersections between arguments.
+ *
+ * \return New GEOM_Object, containing the created solid (or compound of solids).
+ */
+ GEOM_Object MakeSolidFromConnectedFaces (in ListOfGO theFacesOrShells, in boolean isIntersect);
+
+ /*!
+ * \brief Replace coincident faces in \a theShapes by one face.
+ * \param theShapes Initial shapes.
* \param theTolerance Maximum distance between faces, which can be considered as coincident.
* \param doKeepNonSolids If FALSE, only solids will present in the result, otherwise all initial shapes.
- * \return New GEOM_Object, containing a copy of theShape without coincident faces.
+ * \return New GEOM_Object containing copies of theShapes without coincident faces.
*/
- GEOM_Object MakeGlueFaces (in GEOM_Object theShape, in double theTolerance, in boolean doKeepNonSolids);
+ GEOM_Object MakeGlueFaces (in ListOfGO theShapes, in double theTolerance, in boolean doKeepNonSolids);
/*!
- * Find coincident faces in theShape for possible gluing.
- * \param theShape Initial shape.
+ * Find coincident faces in theShapes for possible gluing.
+ * \param theShapes Initial shapes.
* \param theTolerance Maximum distance between faces, which can be considered as coincident.
* \return ListOfGO
*/
- ListOfGO GetGlueFaces (in GEOM_Object theShape, in double theTolerance);
+ ListOfGO GetGlueFaces (in ListOfGO theShapes, in double theTolerance);
/*!
- * \brief Replace coincident faces in theShape by one face
- * in compliance with given list of faces
- * \param theShape Initial shape.
+ * \brief Replace coincident faces in \a theShapes by one face
+ * in compliance with given list of faces
+ * \param theShapes Initial shapes.
* \param theTolerance Maximum distance between faces, which can be considered as coincident.
* \param theFaces List of faces for gluing.
* \param doKeepNonSolids If FALSE, only solids will present in the result, otherwise all initial shapes.
* \param doGlueAllEdges If TRUE, all coincident edges of <VAR>theShape</VAR>
* will be glued, otherwise only the edges,
* belonging to <VAR>theFaces</VAR>.
- * \return New GEOM_Object, containing a copy of theShape without some faces.
+ * \return New GEOM_Object containing copies of theShapes without coincident faces.
*/
- GEOM_Object MakeGlueFacesByList (in GEOM_Object theShape, in double theTolerance,
- in ListOfGO theFaces, in boolean doKeepNonSolids,
+ GEOM_Object MakeGlueFacesByList (in ListOfGO theShapes, in double theTolerance,
+ in ListOfGO theFaces, in boolean doKeepNonSolids,
in boolean doGlueAllEdges);
/*!
- * \brief Replace coincident edges in theShape by one edge.
- * \param theShape Initial shape.
+ * \brief Replace coincident edges in \a theShapes by one edge.
+ * \param theShapes Initial shapes.
* \param theTolerance Maximum distance between edges, which can be considered as coincident.
- * \return New GEOM_Object, containing a copy of theShape without coincident edges.
+ * \return New GEOM_Object containing copies of theShapes without coincident edges.
*/
- GEOM_Object MakeGlueEdges (in GEOM_Object theShape, in double theTolerance);
+ GEOM_Object MakeGlueEdges (in ListOfGO theShapes, in double theTolerance);
/*!
- * Find coincident edges in theShape for possible gluing.
- * \param theShape Initial shape.
+ * Find coincident edges in \a theShapes for possible gluing.
+ * \param theShapes Initial shapes.
* \param theTolerance Maximum distance between edges, which can be considered as coincident.
* \return ListOfGO
*/
- ListOfGO GetGlueEdges (in GEOM_Object theShape, in double theTolerance);
+ ListOfGO GetGlueEdges (in ListOfGO theShapes, in double theTolerance);
/*!
- * \brief Replace coincident edges in theShape by one edge
- * in compliance with given list of edges
- * \param theShape Initial shape.
+ * \brief Replace coincident edges in \a theShapes by one edge
+ * in compliance with given list of edges
+ * \param theShapes Initial shapes.
* \param theTolerance Maximum distance between edges, which can be considered as coincident.
* \param theEdges List of edges for gluing.
- * \return New GEOM_Object, containing a copy of theShape without some edges.
+ * \return New GEOM_Object containing copies of theShapes without some edges.
*/
- GEOM_Object MakeGlueEdgesByList (in GEOM_Object theShape,
- in double theTolerance,
+ GEOM_Object MakeGlueEdgesByList (in ListOfGO theShape,
+ in double theTolerance,
in ListOfGO theEdges);
/*!
ListOfLong GetSameIDs (in GEOM_Object theShapeWhere,
in GEOM_Object theShapeWhat);
+ /*!
+ * \brief Resize the input edge with the new Min and Max parameters.
+ * The input edge parameters range is [0, 1]. If theMin parameter is
+ * negative, the input edge is extended, otherwise it is shrinked by
+ * theMin parameter. If theMax is greater than 1, the edge is extended,
+ * otherwise it is shrinked by theMax parameter.
+ * \param theEdge the input edge to be resized.
+ * \param theMin the minimal parameter value.
+ * \param theMax the maximal parameter value.
+ * \return a newly created edge.
+ */
+ GEOM_Object ExtendEdge(in GEOM_Object theEdge,
+ in double theMin,
+ in double theMax);
+
+ /*!
+ * \brief Resize the input face with the new UMin, UMax, VMin and VMax
+ * parameters. The input face U and V parameters range is [0, 1]. If
+ * theUMin parameter is negative, the input face is extended, otherwise
+ * it is shrinked along U direction by theUMin parameter. If theUMax is
+ * greater than 1, the face is extended, otherwise it is shrinked along
+ * U direction by theUMax parameter. So as for theVMin, theVMax and
+ * V direction of the input face.
+ * \param theFace the input face to be resized.
+ * \param theUMin the minimal U parameter value.
+ * \param theUMax the maximal U parameter value.
+ * \param theVMin the minimal V parameter value.
+ * \param theVMax the maximal V parameter value.
+ * \return a newly created face.
+ */
+ GEOM_Object ExtendFace(in GEOM_Object theFace,
+ in double theUMin,
+ in double theUMax,
+ in double theVMin,
+ in double theVMax);
+
+ /*!
+ * \brief Make a surface from a face. This function takes some face as
+ * input parameter and creates new GEOM_Object, i.e. topological shape
+ * by extracting underlying surface of the source face and limiting it
+ * by the Umin, Umax, Vmin, Vmax parameters of the source face (in the
+ * parametrical space).
+ * \param theFace the input face.
+ * \return a newly created face.
+ */
+ GEOM_Object MakeSurfaceFromFace(in GEOM_Object theFace);
+
};
// # GEOM_IBlocksOperations:
* \return New GEOM_Object, containing the created wire.
*/
GEOM_Object Make3DSketcher (in ListOfDouble theCoordinates);
+
+ /*!
+ * \brief Create a 2D polyline (wire or a compound of wires).
+ *
+ * The polyline can have several sections. Each section represents a set
+ * of points in the form of list of coordinates of the following order:
+ * x1, y1, x2, y2, ..., xN, yN
+ * Each section has its own name, type of curve (can be either
+ * GEOM::Polyline or GEOM::Interpolation) and Closed flag.
+ * For each section a wire is created. It represents either a polyline or
+ * interpolation BSpline either closed or not depending on the Closed flag.
+ * The result represents a wire if there is only one section is defined.
+ * Otherwise a compound of wires is returned.
+ *
+ * \param theCoordsList the list of coordinates list. theCoordsList[0]
+ * is the coordinates list of the first section. theCoordsList[1]
+ * is for the second section etc.
+ * \param theNamesList the list of names. The order corresponds to
+ * theCoordsList.
+ * \param theTypesList the list of curve types. The order corresponds to
+ * theCoordsList.
+ * \param theClosedList the list of Closed flags. The order corresponds to
+ * theCoordsList.
+ * \param theWorkingPlane 9 double values, defining origin,
+ * OZ and OX directions of the working plane.
+ * \return New GEOM_Object, containing the created wire or a compound
+ * of wires.
+ */
+ GEOM_Object MakePolyline2D (in ListOfListOfDouble theCoordsList,
+ in string_array theNamesList,
+ in short_array theTypesList,
+ in ListOfBool theClosedList,
+ in ListOfDouble theWorkingPlane);
+
+ /*!
+ * \brief Create a 2D polyline (wire or a compound of wires).
+ *
+ * The polyline can have several sections. Each section represents a set
+ * of points in the form of list of coordinates of the following order:
+ * x1, y1, x2, y2, ..., xN, yN
+ * Each section has its own name, type of curve (can be either
+ * GEOM::Polyline or GEOM::Interpolation) and Closed flag.
+ * For each section a wire is created. It represents either a polyline or
+ * interpolation BSpline either closed or not depending on the Closed flag.
+ * The result represents a wire if there is only one section is defined.
+ * Otherwise a compound of wires is returned.
+ *
+ * \param theCoordsList the list of coordinates list. theCoordsList[0]
+ * is the coordinates list of the first section. theCoordsList[1]
+ * is for the second section etc.
+ * \param theNamesList the list of names. The order corresponds to
+ * theCoordsList.
+ * \param theTypesList the list of curve types. The order corresponds to
+ * theCoordsList.
+ * \param theClosedList the list of Closed flags. The order corresponds to
+ * theCoordsList.
+ * \param theWorkingPlane planar Face or LCS(Marker) of the working plane.
+ * \return New GEOM_Object, containing the created wire or a compound
+ * of wires.
+ */
+ GEOM_Object MakePolyline2DOnPlane (in ListOfListOfDouble theCoordsList,
+ in string_array theNamesList,
+ in short_array theTypesList,
+ in ListOfBool theClosedList,
+ in GEOM_Object theWorkingPlane);
+
};
// # GEOM_ILocalOperations:
* \param theTolerance Required tolerance value.
* \return New GEOM_Object, containing processed shape.
*/
- GEOM_Object Sew (in GEOM_Object theObject, in double theTolerance);
+ GEOM_Object Sew (in ListOfGO theObjects, in double theTolerance);
/*!
* Sewing of the given object. Allows non-manifold sewing.
* \param theTolerance Required tolerance value.
* \return New GEOM_Object, containing processed shape.
*/
- GEOM_Object SewAllowNonManifold(in GEOM_Object theObject, in double theTolerance);
+ GEOM_Object SewAllowNonManifold(in ListOfGO theObjects, in double theTolerance);
/*!
- * Rebuild the topology of theCompound of solids by removing
- * of the faces that are shared by several solids.
- * \param theCompound Shape to be processed.
+ * Rebuild the topology of theSolids by removing
+ * the faces that are shared by several solids.
+ * \param theSolids A list of shapes containing solids to be processed.
* \return New GEOM_Object, containing processed shape.
*/
- GEOM_Object RemoveInternalFaces (in GEOM_Object theCompound);
+ GEOM_Object RemoveInternalFaces (in ListOfGO theSolids);
/*!
- * \brief Addition of a point to a given edge object.
+ * \brief Addition of a point to a given edge of \a theObject.
* \param theObject Shape to be processed.
* \param theEdgeIndex Index of edge to be divided within theObject's shape,
* if -1, then theObject itself is the edge.
* depending on \a isByParameter.
* \param isByParameter If TRUE : \a theValue is treated as a curve parameter [0..1],
* if FALSE : \a theValue is treated as a length parameter [0..1]
- * \return New GEOM_Object, containing processed shape.
+ * \return New GEOM_Object, containing the processed shape.
*/
GEOM_Object DivideEdge (in GEOM_Object theObject, in short theEdgeIndex,
in double theValue, in boolean isByParameter);
+ /*!
+ * \brief Addition of a point to a given edge of \a theObject by projecting
+ * another point to the given edge.
+ * \param theObject Shape to be processed.
+ * \param theEdgeIndex Index of edge to be divided within theObject's shape,
+ * if -1, then theObject itself is the edge.
+ * \param thePoint Point to project to theEdgeIndex-th edge.
+ * \return New GEOM_Object, containing the processed shape.
+ */
+ GEOM_Object DivideEdgeByPoint (in GEOM_Object theObject,
+ in short theEdgeIndex,
+ in GEOM_Object thePoint);
+
/*!
* \brief Suppress the vertices in the wire in case if adjacent edges are C1 continuous.
* \param theWire Wire to minimize the number of C1 continuous edges in.
/*!
* \brief Get a list of wires (wrapped in GEOM_Object-s),
* that constitute a free boundary of the given shape.
- * \param theObject Shape to get free boundary of.
+ * \param theObject Shapes to get free boundary of.
* \param theClosedWires Output. Closed wires on the free boundary of the given shape.
* \param theOpenWires Output. Open wires on the free boundary of the given shape.
* \return FALSE, if an error(s) occured during the method execution.
*/
- boolean GetFreeBoundary (in GEOM_Object theObject,
+ boolean GetFreeBoundary (in ListOfGO theObjects,
out ListOfGO theClosedWires,
out ListOfGO theOpenWires);
GEOM_Object MakeCopy (in GEOM_Object theOriginal);
/*!
+ * \brief Deprecated method. Use Export\<FormatName\> (from the
+ * corresponding plugin) instead; here \<FormatName\> is a name of format.
+ *
* \brief Export the given shape into a file with given name.
* \param theObject Shape to be stored in the file.
* \param theFileName Name of the file to store the given shape in.
* \param theFormatName Specify format for the shape storage.
- * Available formats can be obtained with <VAR>ImportTranslators()</VAR> method.
*/
void Export (in GEOM_Object theObject, in string theFileName, in string theFormatName);
/*!
- * \brief Import a shape from the BRep or IGES or STEP file
+ * \brief Deprecated method. Use Import\<FormatName\> (from the
+ * corresponding plugin) instead; here \<FormatName\> is a name of format.
+ *
+ * \brief Import a shape from the STL, BREP, IGES or STEP file
* (depends on given format) with given name.
* \param theFileName The file, containing the shape.
* \param theFormatName Specify format for the file reading.
- * Available formats can be obtained with <VAR>ImportTranslators()</VAR> method.
* If format 'IGES_SCALE' is used instead of 'IGES' or
* format 'STEP_SCALE' is used instead of 'STEP',
* file length unit will be ignored (set to 'meter') and result model will be scaled.
* \return List of GEOM_Object, containing the created shape and groups of materials.
*/
- ListOfGO ImportFile (in string theFileName, in string theFormatName);
+ ListOfGBO ImportFile (in string theFileName, in string theFormatName);
/*!
+ * \brief Deprecated method. Use ReadValue (from the corresponding plugin) instead.
+ *
* \brief Read a value of parameter from a file, containing a shape.
* \param theFileName The file, containing the shape.
* \param theFormatName Specify format for the file reading.
- * Available formats can be obtained with <VAR>ImportTranslators()</VAR> method.
* \param theParameterName Specify the parameter. For example, pass "LEN_UNITS"
* to obtain length units, in which the file is written.
* \return Value of requested parameter in form of text string.
*/
string ReadValue (in string theFileName, in string theFormatName, in string theParameterName);
- /*!
- * \brief Get the supported import formats and corresponding patterns for File dialog.
- * \param theFormats Output. List of formats, available for import.
- * \param thePatterns Output. List of file patterns, corresponding to available formats.
- * \return Returns available formats and patterns through the arguments.
- */
- void ImportTranslators (out string_array theFormats,
- out string_array thePatterns);
-
- /*!
- * \brief Get the supported export formats and corresponding patterns for File dialog.
- * \param theFormats Output. List of formats, available for export.
- * \param thePatterns Output. List of file patterns, corresponding to available formats.
- * \return Returns available formats and patterns through the arguments.
- */
- void ExportTranslators (out string_array theFormats,
- out string_array thePatterns);
-
/*!
* \brief Read a shape from the binary stream, containing its bounding representation (BRep).
* \note GEOM_Object::GetShapeStream() method can be used to obtain the shape's BRep stream.
* \return list of all texture IDs avaiable for the current study
*/
ListOfLong GetAllTextures();
-
- /*!
- * Export a shape to XAO format
- * \param shape The shape to export
- * \param groups The list of groups to export
- * \param fields The list of fields to export
- * \param author The author of the export
- * \param fileName The name of the file to export
- * \return boolean indicating if export was successful.
- */
- boolean ExportXAO(in GEOM_Object shape,
- in ListOfGO groups, in ListOfFields fields,
- in string author, in string fileName);
- /*!
- * Import a shape from XAO format
- * \param fileName The name of the file to import
- * \param shape The imported shape
- * \param subShapes The list of imported subShapes
- * \param groups The list of imported groups
- * \param fields The list of imported fields
- * \return boolean indicating if import was successful.
- */
- boolean ImportXAO(in string fileName, out GEOM_Object shape,
- out ListOfGO subShapes, out ListOfGO groups, out ListOfFields fields);
};
// # GEOM_IKindOfShape:
out double EdgeMin, out double EdgeMax,
out double VertMin, out double VertMax);
+ /*!
+ * \brief Enumeration of Shape defects coming from CheckShape algorithms.
+ */
+ enum ShapeErrorType
+ {
+ /* for vertices */
+ InvalidPointOnCurve,
+ InvalidPointOnCurveOnSurface,
+ InvalidPointOnSurface,
+
+ /* for edges */
+ No3DCurve,
+ Multiple3DCurve,
+ Invalid3DCurve,
+ NoCurveOnSurface,
+ InvalidCurveOnSurface,
+ InvalidCurveOnClosedSurface,
+ InvalidSameRangeFlag,
+ InvalidSameParameterFlag,
+ InvalidDegeneratedFlag,
+
+ FreeEdge,
+ InvalidMultiConnexity,
+ InvalidRange,
+
+ /* for wires */
+ EmptyWire,
+ RedundantEdge,
+ SelfIntersectingWire, /* on a face */
+
+ /* for faces */
+ NoSurface,
+ InvalidWire,
+ RedundantWire,
+ IntersectingWires,
+ InvalidImbricationOfWires,
+
+ /* for shells */
+ EmptyShell,
+ RedundantFace,
+
+ /* for shapes */
+ UnorientableShape,
+ NotClosed,
+ NotConnected,
+
+ SubshapeNotInShape,
+
+ BadOrientation,
+ BadOrientationOfSubshape,
+
+ InvalidToleranceValue,
+
+ /* for exception */
+ CheckFail
+ };
+
+ /*!
+ * \brief Description of a shape defect: type and incriminated sub-shapes.
+ */
+ struct ShapeError
+ {
+ ShapeErrorType error;
+ ListOfLong incriminated;
+ };
+
+ /*!
+ * \brief Sequence of all shape defects.
+ */
+ typedef sequence<ShapeError> ShapeErrors;
+
/*!
* \brief Check a topology of the given shape.
* \param theShape Shape to check validity of.
- * \param theDescription Output. Description of problems in the shape, if they are.
+ * \param theErrors Structure, containing discovered errors and incriminated sub-shapes.
* \return TRUE, if the shape "seems to be valid" from the topological point of view.
*/
- boolean CheckShape (in GEOM_Object theShape,
- out string theDescription);
+ boolean CheckShape (in GEOM_Object theShape,
+ out ShapeErrors theErrors);
/*!
* \brief Check a topology and a geometry of the given shape.
* \param theShape Shape to check validity of.
- * \param theDescription Output. Description of problems in the shape, if they are.
+ * \param theErrors Structure, containing discovered errors and incriminated sub-shapes.
* \return TRUE, if the shape "seems to be valid".
*/
- boolean CheckShapeWithGeometry (in GEOM_Object theShape,
- out string theDescription);
+ boolean CheckShapeWithGeometry (in GEOM_Object theShape,
+ out ShapeErrors theErrors);
+
+ /*!
+ * \brief Convert sequence of shape errors, returned by
+ * <VAR>CheckShape()</VAR> or <VAR>CheckShapeWithGeometry()</VAR>, into string.
+ * \param theShape the invalid shape.
+ * \param theErrors The sequence of \a theShape errors.
+ * \return String, describing all the errors in form, suitable for printing.
+ */
+ string PrintShapeErrors (in GEOM_Object theShape,
+ in ShapeErrors theErrors);
/*!
* \brief Check a topology of the given shape on self-intersections presence.
* \param theShape Shape to check validity of.
+ * \param theCheckLevel the level of self-interference check.
* \param theIntersections Output. List of intersected sub-shapes IDs, it contains pairs of IDs.
* \return TRUE, if the shape does not have any self-intersections.
*/
boolean CheckSelfIntersections (in GEOM_Object theShape,
+ in long theCheckLevel,
out ListOfLong theIntersections);
/*!
ListOfLong GetObjects (in GEOM_Object theGroup);
};
- // # GEOM_IAdvancedOperations:
- /*!
- * \brief Interface for advanced modeling functions.
- */
- interface GEOM_IAdvancedOperations : GEOM_IOperations
- {
- // T-Shape WITHOUT Thickness reduction
-
- /*!
- * \brief Create a T-shape object with specified caracteristics for the main and
- * the incident pipes (radius, width, half-length).
- *
- * Center of the shape is (0,0,0). The main plane of the T-shape is XOY.
- * \param theR1 Internal radius of main pipe
- * \param theW1 Width of main pipe
- * \param theL1 Half-length of main pipe
- * \param theR2 Internal radius of incident pipe (R2 < R1)
- * \param theW2 Width of incident pipe (R2+W2 < R1+W1)
- * \param theL2 Half-length of incident pipe
- * \param theHexMesh Boolean indicating if shape is prepared for hex mesh (default=true)
- * \return List of GEOM_Object, containing the created shape and propagation groups.
- */
- ListOfGO MakePipeTShape (in double theR1, in double theW1, in double theL1,
- in double theR2, in double theW2, in double theL2,
- in boolean theHexMesh);
- /*!
- * \brief Create a T-shape object with specified caracteristics for the main and
- * the incident pipes (radius, width, half-length).
- *
- * The extremities of the main pipe are located on junctions points P1 and P2.
- * The extremity of the incident pipe is located on junction point P3.
- * \param theR1 Internal radius of main pipe
- * \param theW1 Width of main pipe
- * \param theL1 Half-length of main pipe
- * \param theR2 Internal radius of incident pipe (R2 < R1)
- * \param theW2 Width of incident pipe (R2+W2 < R1+W1)
- * \param theL2 Half-length of incident pipe
- * \param theHexMesh Boolean indicating if shape is prepared for hex mesh (default=true)
- * \param theP1 1st junction point of main pipe
- * \param theP2 2nd junction point of main pipe
- * \param theP3 Junction point of incident pipe
- * \return List of GEOM_Object, containing the created shape and propagation groups.
- */
- ListOfGO MakePipeTShapeWithPosition (in double theR1, in double theW1, in double theL1,
- in double theR2, in double theW2, in double theL2,
- in boolean theHexMesh,
- in GEOM_Object theP1, in GEOM_Object theP2, in GEOM_Object theP3);
- /*!
- * \brief Create a T-shape object with specified caracteristics for the main and
- * the incident pipes (radius, width, half-length). A chamfer is created
- * on the junction of the pipes.
- *
- * Center of the shape is (0,0,0). The main plane of the T-shape is XOY.
- * \param theR1 Internal radius of main pipe
- * \param theW1 Width of main pipe
- * \param theL1 Half-length of main pipe
- * \param theR2 Internal radius of incident pipe (R2 < R1)
- * \param theW2 Width of incident pipe (R2+W2 < R1+W1)
- * \param theL2 Half-length of incident pipe
- * \param theH Height of the chamfer.
- * \param theW Width of the chamfer.
- * \param theHexMesh Boolean indicating if shape is prepared for hex mesh (default=true)
- * \return List of GEOM_Object, containing the created shape and propagation groups.
- */
- ListOfGO MakePipeTShapeChamfer (in double theR1, in double theW1, in double theL1,
- in double theR2, in double theW2, in double theL2,
- in double theH, in double theW, in boolean theHexMesh);
- /*!
- * \brief Create a T-shape object with specified caracteristics for the main and
- * the incident pipes (radius, width, half-length).
- *
- * A chamfer is created on the junction of the pipes.
- * The extremities of the main pipe are located on junctions points P1 and P2.
- * The extremity of the incident pipe is located on junction point P3.
- * \param theR1 Internal radius of main pipe
- * \param theW1 Width of main pipe
- * \param theL1 Half-length of main pipe
- * \param theR2 Internal radius of incident pipe (R2 < R1)
- * \param theW2 Width of incident pipe (R2+W2 < R1+W1)
- * \param theL2 Half-length of incident pipe
- * \param theH Height of the chamfer.
- * \param theW Width of the chamfer.
- * \param theHexMesh Boolean indicating if shape is prepared for hex mesh (default=true)
- * \param theP1 1st junction point of main pipe
- * \param theP2 2nd junction point of main pipe
- * \param theP3 Junction point of incident pipe
- * \return List of GEOM_Object, containing the created shape and propagation groups.
- */
- ListOfGO MakePipeTShapeChamferWithPosition (in double theR1, in double theW1, in double theL1,
- in double theR2, in double theW2, in double theL2,
- in double theH, in double theW, in boolean theHexMesh,
- in GEOM_Object theP1, in GEOM_Object theP2, in GEOM_Object theP3);
- /*!
- * \brief Create a T-shape object with specified caracteristics for the main and
- * the incident pipes (radius, width, half-length).
- *
- * A fillet is created on the junction of the pipes.
- * Center of the shape is (0,0,0). The main plane of the T-shape is XOY.
- * \param theR1 Internal radius of main pipe
- * \param theW1 Width of main pipe
- * \param theL1 Half-length of main pipe
- * \param theR2 Internal radius of incident pipe (R2 < R1)
- * \param theW2 Width of incident pipe (R2+W2 < R1+W1)
- * \param theL2 Half-length of incident pipe
- * \param theRF Radius of curvature of fillet.
- * \param theHexMesh Boolean indicating if shape is prepared for hex mesh (default=true)
- * \return List of GEOM_Object, containing the created shape and propagation groups.
- */
- ListOfGO MakePipeTShapeFillet (in double theR1, in double theW1, in double theL1,
- in double theR2, in double theW2, in double theL2,
- in double theRF, in boolean theHexMesh);
- /*!
- * \brief Create a T-shape object with specified caracteristics for the main and
- * the incident pipes (radius, width, half-length).
- *
- * A fillet is created on the junction of the pipes.
- * The extremities of the main pipe are located on junctions points P1 and P2.
- * The extremity of the incident pipe is located on junction point P3.
- * \param theR1 Internal radius of main pipe
- * \param theW1 Width of main pipe
- * \param theL1 Half-length of main pipe
- * \param theR2 Internal radius of incident pipe (R2 < R1)
- * \param theW2 Width of incident pipe (R2+W2 < R1+W1)
- * \param theL2 Half-length of incident pipe
- * \param theRF Radius of curvature of fillet.
- * \param theHexMesh Boolean indicating if shape is prepared for hex mesh (default=true)
- * \param theP1 1st junction point of main pipe
- * \param theP2 2nd junction point of main pipe
- * \param theP3 Junction point of incident pipe
- * \return List of GEOM_Object, containing the created shape and propagation groups.
- */
- ListOfGO MakePipeTShapeFilletWithPosition (in double theR1, in double theW1, in double theL1,
- in double theR2, in double theW2, in double theL2,
- in double theRF, in boolean theHexMesh,
- in GEOM_Object theP1, in GEOM_Object theP2, in GEOM_Object theP3);
-
- // T-Shape WITH Thickness reduction
-
- /*!
- * \brief Create a T-shape object with specified caracteristics for the main and
- * the incident pipes (radius, width, half-length).
- *
- * Center of the shape is (0,0,0). The main plane of the T-shape is XOY.
- * \param theR1 Internal radius of main pipe
- * \param theW1 Width of main pipe
- * \param theL1 Half-length of main pipe
- * \param theR2 Internal radius of incident pipe (R2 < R1)
- * \param theW2 Width of incident pipe (R2+W2 < R1+W1)
- * \param theL2 Half-length of incident pipe
- *
- * \param theRL Internal radius of left thickness reduction
- * \param theWL Width of left thickness reduction
- * \param theLtransL Length of left transition part
- * \param theLthinL Length of left thin part
- *
- * \param theRR Internal radius of right thickness reduction
- * \param theWR Width of right thickness reduction
- * \param theLtransR Length of right transition part
- * \param theLthinR Length of right thin part
- *
- * \param theRI Internal radius of incident thickness reduction
- * \param theWI Width of incident thickness reduction
- * \param theLtransI Length of incident transition part
- * \param theLthinI Length of incident thin part
- *
- * \param theHexMesh Boolean indicating if shape is prepared for hex mesh (default=true)
- * \return List of GEOM_Object, containing the created shape and propagation groups.
- */
- ListOfGO MakePipeTShapeTR (in double theR1, in double theW1, in double theL1,
- in double theR2, in double theW2, in double theL2,
- in double theRL, in double theWL, in double theLtransL, in double theLthinL,
- in double theRR, in double theWR, in double theLtransR, in double theLthinR,
- in double theRI, in double theWI, in double theLtransI, in double theLthinI,
- in boolean theHexMesh);
- /*!
- * \brief Create a T-shape object with specified caracteristics for the main and
- * the incident pipes (radius, width, half-length).
- *
- * The extremities of the main pipe are located on junctions points P1 and P2.
- * The extremity of the incident pipe is located on junction point P3.
- * \param theR1 Internal radius of main pipe
- * \param theW1 Width of main pipe
- * \param theL1 Half-length of main pipe
- * \param theR2 Internal radius of incident pipe (R2 < R1)
- * \param theW2 Width of incident pipe (R2+W2 < R1+W1)
- * \param theL2 Half-length of incident pipe
- *
- * \param theRL Internal radius of left thickness reduction
- * \param theWL Width of left thickness reduction
- * \param theLtransL Length of left transition part
- * \param theLthinL Length of left thin part
- *
- * \param theRR Internal radius of right thickness reduction
- * \param theWR Width of right thickness reduction
- * \param theLtransR Length of right transition part
- * \param theLthinR Length of right thin part
- *
- * \param theRI Internal radius of incident thickness reduction
- * \param theWI Width of incident thickness reduction
- * \param theLtransI Length of incident transition part
- * \param theLthinI Length of incident thin part
- *
- * \param theHexMesh Boolean indicating if shape is prepared for hex mesh (default=true)
- * \param theP1 1st junction point of main pipe
- * \param theP2 2nd junction point of main pipe
- * \param theP3 Junction point of incident pipe
- * \return List of GEOM_Object, containing the created shape and propagation groups.
- */
- ListOfGO MakePipeTShapeTRWithPosition
- (in double theR1, in double theW1, in double theL1,
- in double theR2, in double theW2, in double theL2,
- in double theRL, in double theWL, in double theLtransL, in double theLthinL,
- in double theRR, in double theWR, in double theLtransR, in double theLthinR,
- in double theRI, in double theWI, in double theLtransI, in double theLthinI,
- in boolean theHexMesh,
- in GEOM_Object theP1, in GEOM_Object theP2, in GEOM_Object theP3);
- /*!
- * \brief Create a T-shape object with specified caracteristics for the main and
- * the incident pipes (radius, width, half-length). A chamfer is created
- * on the junction of the pipes.
- *
- * Center of the shape is (0,0,0). The main plane of the T-shape is XOY.
- * \param theR1 Internal radius of main pipe
- * \param theW1 Width of main pipe
- * \param theL1 Half-length of main pipe
- * \param theR2 Internal radius of incident pipe (R2 < R1)
- * \param theW2 Width of incident pipe (R2+W2 < R1+W1)
- * \param theL2 Half-length of incident pipe
- *
- * \param theRL Internal radius of left thickness reduction
- * \param theWL Width of left thickness reduction
- * \param theLtransL Length of left transition part
- * \param theLthinL Length of left thin part
- *
- * \param theRR Internal radius of right thickness reduction
- * \param theWR Width of right thickness reduction
- * \param theLtransR Length of right transition part
- * \param theLthinR Length of right thin part
- *
- * \param theRI Internal radius of incident thickness reduction
- * \param theWI Width of incident thickness reduction
- * \param theLtransI Length of incident transition part
- * \param theLthinI Length of incident thin part
- *
- * \param theH Height of the chamfer.
- * \param theW Width of the chamfer.
- * \param theHexMesh Boolean indicating if shape is prepared for hex mesh (default=true)
- * \return List of GEOM_Object, containing the created shape and propagation groups.
- */
- ListOfGO MakePipeTShapeTRChamfer
- (in double theR1, in double theW1, in double theL1,
- in double theR2, in double theW2, in double theL2,
- in double theRL, in double theWL, in double theLtransL, in double theLthinL,
- in double theRR, in double theWR, in double theLtransR, in double theLthinR,
- in double theRI, in double theWI, in double theLtransI, in double theLthinI,
- in double theH, in double theW, in boolean theHexMesh);
- /*!
- * \brief Create a T-shape object with specified caracteristics for the main and
- * the incident pipes (radius, width, half-length).
- *
- * A chamfer is created on the junction of the pipes.
- * The extremities of the main pipe are located on junctions points P1 and P2.
- * The extremity of the incident pipe is located on junction point P3.
- * \param theR1 Internal radius of main pipe
- * \param theW1 Width of main pipe
- * \param theL1 Half-length of main pipe
- * \param theR2 Internal radius of incident pipe (R2 < R1)
- * \param theW2 Width of incident pipe (R2+W2 < R1+W1)
- * \param theL2 Half-length of incident pipe
- *
- * \param theRL Internal radius of left thickness reduction
- * \param theWL Width of left thickness reduction
- * \param theLtransL Length of left transition part
- * \param theLthinL Length of left thin part
- *
- * \param theRR Internal radius of right thickness reduction
- * \param theWR Width of right thickness reduction
- * \param theLtransR Length of right transition part
- * \param theLthinR Length of right thin part
- *
- * \param theRI Internal radius of incident thickness reduction
- * \param theWI Width of incident thickness reduction
- * \param theLtransI Length of incident transition part
- * \param theLthinI Length of incident thin part
- *
- * \param theH Height of the chamfer.
- * \param theW Width of the chamfer.
- * \param theHexMesh Boolean indicating if shape is prepared for hex mesh (default=true)
- * \param theP1 1st junction point of main pipe
- * \param theP2 2nd junction point of main pipe
- * \param theP3 Junction point of incident pipe
- * \return List of GEOM_Object, containing the created shape and propagation groups.
- */
- ListOfGO MakePipeTShapeTRChamferWithPosition
- (in double theR1, in double theW1, in double theL1,
- in double theR2, in double theW2, in double theL2,
- in double theRL, in double theWL, in double theLtransL, in double theLthinL,
- in double theRR, in double theWR, in double theLtransR, in double theLthinR,
- in double theRI, in double theWI, in double theLtransI, in double theLthinI,
- in double theH, in double theW, in boolean theHexMesh,
- in GEOM_Object theP1, in GEOM_Object theP2, in GEOM_Object theP3);
- /*!
- * \brief Create a T-shape object with specified caracteristics for the main and
- * the incident pipes (radius, width, half-length).
- *
- * A fillet is created on the junction of the pipes.
- * Center of the shape is (0,0,0). The main plane of the T-shape is XOY.
- * \param theR1 Internal radius of main pipe
- * \param theW1 Width of main pipe
- * \param theL1 Half-length of main pipe
- * \param theR2 Internal radius of incident pipe (R2 < R1)
- * \param theW2 Width of incident pipe (R2+W2 < R1+W1)
- * \param theL2 Half-length of incident pipe
- *
- * \param theRL Internal radius of left thickness reduction
- * \param theWL Width of left thickness reduction
- * \param theLtransL Length of left transition part
- * \param theLthinL Length of left thin part
- *
- * \param theRR Internal radius of right thickness reduction
- * \param theWR Width of right thickness reduction
- * \param theLtransR Length of right transition part
- * \param theLthinR Length of right thin part
- *
- * \param theRI Internal radius of incident thickness reduction
- * \param theWI Width of incident thickness reduction
- * \param theLtransI Length of incident transition part
- * \param theLthinI Length of incident thin part
- *
- * \param theRF Radius of curvature of fillet.
- * \param theHexMesh Boolean indicating if shape is prepared for hex mesh (default=true)
- * \return List of GEOM_Object, containing the created shape and propagation groups.
- */
- ListOfGO MakePipeTShapeTRFillet
- (in double theR1, in double theW1, in double theL1,
- in double theR2, in double theW2, in double theL2,
- in double theRL, in double theWL, in double theLtransL, in double theLthinL,
- in double theRR, in double theWR, in double theLtransR, in double theLthinR,
- in double theRI, in double theWI, in double theLtransI, in double theLthinI,
- in double theRF, in boolean theHexMesh);
- /*!
- * \brief Create a T-shape object with specified caracteristics for the main and
- * the incident pipes (radius, width, half-length).
- *
- * A fillet is created on the junction of the pipes.
- * The extremities of the main pipe are located on junctions points P1 and P2.
- * The extremity of the incident pipe is located on junction point P3.
- * \param theR1 Internal radius of main pipe
- * \param theW1 Width of main pipe
- * \param theL1 Half-length of main pipe
- * \param theR2 Internal radius of incident pipe (R2 < R1)
- * \param theW2 Width of incident pipe (R2+W2 < R1+W1)
- * \param theL2 Half-length of incident pipe
- *
- * \param theRL Internal radius of left thickness reduction
- * \param theWL Width of left thickness reduction
- * \param theLtransL Length of left transition part
- * \param theLthinL Length of left thin part
- *
- * \param theRR Internal radius of right thickness reduction
- * \param theWR Width of right thickness reduction
- * \param theLtransR Length of right transition part
- * \param theLthinR Length of right thin part
- *
- * \param theRI Internal radius of incident thickness reduction
- * \param theWI Width of incident thickness reduction
- * \param theLtransI Length of incident transition part
- * \param theLthinI Length of incident thin part
- *
- * \param theRF Radius of curvature of fillet.
- * \param theHexMesh Boolean indicating if shape is prepared for hex mesh (default=true)
- * \param theP1 1st junction point of main pipe
- * \param theP2 2nd junction point of main pipe
- * \param theP3 Junction point of incident pipe
- * \return List of GEOM_Object, containing the created shape and propagation groups.
- */
- ListOfGO MakePipeTShapeTRFilletWithPosition
- (in double theR1, in double theW1, in double theL1,
- in double theR2, in double theW2, in double theL2,
- in double theRL, in double theWL, in double theLtransL, in double theLthinL,
- in double theRR, in double theWR, in double theLtransR, in double theLthinR,
- in double theRI, in double theWI, in double theLtransI, in double theLthinI,
- in double theRF, in boolean theHexMesh,
- in GEOM_Object theP1, in GEOM_Object theP2, in GEOM_Object theP3);
-
- /*!
- * This function allows to create a disk already divided into blocks. It
- * can be use to create divided pipes for later meshing in hexaedra.
- * \param theR Radius of the disk
- * \param theRatio Relative size of the central square diagonal against the disk diameter
- * \param theOrientation Plane on which the disk will be built
- * \param thePattern Division pattern. It can be GEOM.SQUARE or GEOM.HEXAGON
- * \return New GEOM_Object, containing the created shape.
- */
- GEOM_Object MakeDividedDisk (in double theR,
- in double theRatio,
- in short theOrientation,
- in pattern thePattern);
-
- /*!
- * \brief Create a Disk prepared for hexa meshing with given center, normal vector and radius.
- * \param thePnt disk center.
- * \param theVec Vector, normal to the plane of the disk.
- * \param theR Disk radius.
- * \param theRatio Relative size of the central square diagonal against the disk diameter
- * \param thePattern Division pattern. It can be GEOM.SQUARE or GEOM.HEXAGON
- * \return New GEOM_Object, containing the created disk.
- */
- GEOM_Object MakeDividedDiskPntVecR ( in GEOM_Object thePnt,
- in GEOM_Object theVec,
- in double theR,
- in double theRatio,
- in pattern thePattern);
-
- /*!
- * Builds a cylinder prepared for hexa meshes
- * \param theR Radius of the cylinder
- * \param theH Height of the cylinder
- * \param thePattern Division pattern. It can be GEOM.SQUARE or GEOM.HEXAGON
- * \return New GEOM_Object, containing the created shape.
- */
- GEOM_Object MakeDividedCylinder (in double theR,
- in double theH,
- in pattern thePattern );
- /*!
- *
- * Create a smoothing surface from a set of points
- * \param thelPoints list of points. Compounds of points are accepted as well.
- * \param theNbMax maximum number of Bezier pieces in the resulting surface.
- * \param theDegMax maximum degree of the resulting BSpline surface
- * \param theDMax specifies maximum value of the GeomPlate_PlateG0Criterion criterion.
- * \return New GEOM_Object, containing the created shape.
- */
- GEOM_Object MakeSmoothingSurface (in ListOfGO thelPoints,
- in long theNbMax,
- in long theDegMax,
- in double theDMax);
-
- /*@@ insert new functions before this line @@ do not remove this line @@*/
- };
-
- // # GEOM_IFieldOperations:
+ // # GEOM_IFieldOperations:
/*!
* \brief Interface for field operation.
*/
void Move( in object_list what,
in SALOMEDS::SObject where,
in long row );
+
+ /*!
+ * \brief Collects dependencies of the given objects from other ones
+ * \param theStudy The study in which the object is published
+ * \param theListOfEntries List of GEOM object entries in OCAF tree (not in study)
+ * \return Struct of dependent entries and its links as a byte array
+ * \note This method is supposed to be used by GUI only.
+ */
+ SALOMEDS::TMPFile GetDependencyTree(in SALOMEDS::Study theStudy,
+ in string_array theListOfEntries);
+
+ /*!
+ * \brief Fills 3 lists that is used to reduce study of redundant objects:
+ * - dependencies of the given objects from other ones;
+ * - children of the given objects;
+ * - all other objects in study.
+ * \param theStudy The study in which the object was published
+ * \param theSelectedEntries List of GEOM object entries in OCAF tree
+ * \param theParentEntries List of GEOM object entries on which the given objects depend
+ * \param theSubEntries Children entries list of the given objects
+ * \param theOtherEntries List of GEOM object entries which are in the study, but not in parents and children lists
+ * \note This method is supposed to be used by GUI only.
+ */
+ void GetEntriesToReduceStudy(in SALOMEDS::Study theStudy,
+ inout string_array theSelectedEntries,
+ inout string_array theParentEntries,
+ inout string_array theSubEntries,
+ inout string_array theOtherEntries);
+
};
};
