-// Copyright (C) 2007-2012 CEA/DEN, EDF R&D
+// Copyright (C) 2007-2024 CEA, EDF
//
// This library is free software; you can redistribute it and/or
// modify it under the terms of the GNU Lesser General Public
// License as published by the Free Software Foundation; either
-// version 2.1 of the License.
+// version 2.1 of the License, or (at your option) any later version.
//
// This library is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
#ifndef _SMESH_BLSURFALGORITHM_IDL_
#define _SMESH_BLSURFALGORITHM_IDL_
-#include "SMESH_Hypothesis.idl"
#include "GEOM_Gen.idl"
#include "SALOME_Exception.idl"
+#include "SMESH_Hypothesis.idl"
+#include "SMESH_Mesh.idl"
/*!
* BLSURFPlugin: interfaces to BLSURF related hypotheses and algorithms
{
typedef sequence<string> string_array;
+ // Enforced 1D Mesh
+ struct MG_EnforcedMesh1D
+ {
+ SMESH::SMESH_IDSource mesh; // mesh, group or sub-mesh
+ string groupName; // optional name of a group to add mesh edges to
+ };
+ typedef sequence< MG_EnforcedMesh1D > EnforcedMeshesList;
+
// Enforced vertex name
typedef string TEnfName;
// Entry
typedef sequence<TEntry> TEntryList;
// Group name
typedef string TEnfGroupName;
-
+
// Coordinates of enforced vertex
typedef sequence<double,3> TEnfVertexCoords;
// List of coords
typedef sequence<TEnfVertexCoords> TEnfVertexCoordsList;
-
+
// Enforced vertex
struct TEnfVertex {
TEnfName name;
};
typedef sequence<TAttractorParams> TAttParamsMap;
+ // Periodicity
+ struct TPreCadPeriodicity {
+ TEntry shape1Entry;
+ TEntry shape2Entry;
+ TEntryList theSourceVerticesEntries;
+ TEntryList theTargetVerticesEntries;
+ };
+
+ typedef sequence<TPreCadPeriodicity> TPeriodicityList;
+
+ // Hyper-patches
+ typedef sequence< long > THyperPatch;
+ typedef sequence< THyperPatch > THyperPatchList;
+ typedef sequence< string > THyperPatchEntries;
+ typedef sequence< THyperPatchEntries > THyperPatchEntriesList;
+ typedef sequence< GEOM::ListOfGO > THyperPatchShapesList;
+
/*!
* BLSURFPlugin_BLSURF: interface of BLSURF algorithm
*/
*/
interface BLSURFPlugin_Hypothesis : SMESH::SMESH_Hypothesis
{
+
/*!
- * Sets topology usage way defining how mesh conformity is assured
- * value=0 - mesh conformity is assured by conformity of a shape
- * value=1,2 - mesh conformity is assured by pre-processing a CAD model
- * value=3 - mesh conformity is assured by pre-processing a CAD model with Pre-CAD
+ * Get version of MeshGems suite.
+ * The version is a string in form <major>.<minor>-<patch>. Example: "2.9-6".
*/
- void SetTopology(in long way);
- long GetTopology();
+ string GetMeshGemsVersion();
/*!
- * Sets a way to define size of mesh elements to generate
+ *Set a way to define size of mesh elements to generate
* 0 - size is defined automatically
* 1 - size is set by SetPhySize() method
* 2 - size is set by SetPhySize() method. A sizemap is defined.
long GetPhysicalMesh();
/*!
- * Sets size of mesh elements to generate
+ *Set a way to define maximum angular deflection of mesh from CAD model
+ * 0 - deflection is defined automatically
+ * 1 - deflection is set by SetAngleMesh() method
+ * 2 - deflection is set by SetAngleMesh() method. A sizemap is defined (TODO).
+ */
+ void SetGeometricMesh(in long isCustom);
+ long GetGeometricMesh();
+
+ /*!
+ *Set size of mesh elements to generate
*/
void SetPhySize(in double size);
+ void SetPhySizeRel(in double size);
double GetPhySize();
+ boolean IsPhySizeRel();
/*!
- * Sets lower boundary of mesh element size (PhySize)
+ *Set lower boundary of mesh element size
*/
- void SetPhyMin(in double theMinSize);
- double GetPhyMin();
+ void SetMinSize(in double theMinSize);
+ void SetMinSizeRel(in double theMinSize);
+ double GetMinSize();
+ boolean IsMinSizeRel();
/*!
- * Sets upper boundary of mesh element size (PhySize)
+ *Set upper boundary of mesh element size
*/
- void SetPhyMax(in double theMaxSize);
- double GetPhyMax();
+ void SetMaxSize(in double theMaxSize);
+ void SetMaxSizeRel(in double theMaxSize);
+ double GetMaxSize();
+ boolean IsMaxSizeRel();
/*!
- * Sets a way to define maximum angular deflection of mesh from CAD model
- * 0 - deflection is defined automatically
- * 1 - deflection is set by SetAngleMeshS() and SetAngleMeshC() methods
+ *Set maximal allowed ratio between the lengths of two adjacent edges
*/
- void SetGeometricMesh(in long isCustom);
- long GetGeometricMesh();
+ void SetUseGradation(in boolean toUse);
+ boolean GetUseGradation();
+ void SetGradation(in double ratio);
+ double GetGradation();
/*!
- * Sets angular deflection (in degrees) of a mesh face from CAD surface
+ *Set maximal allowed ratio between the lengths of two adjacent edges in 3D mesh
*/
- void SetAngleMeshS(in double angle);
- double GetAngleMeshS();
+ void SetUseVolumeGradation(in boolean toUse);
+ boolean GetUseVolumeGradation();
+ void SetVolumeGradation(in double ratio);
+ double GetVolumeGradation();
/*!
- * Sets angular deflection (in degrees) of a mesh edge from CAD curve
+ *Set to create quadrilateral elements or not
*/
- void SetAngleMeshC(in double angle);
- double GetAngleMeshC();
+ void SetQuadAllowed(in boolean allowed);
+ void SetElementType(in long elementType);
+ long GetElementType();
/*!
- * Sets lower boundary of mesh element size computed to respect angular deflection
+ *Set angular deflection (in degrees) of a mesh face and edge from CAD surface
*/
- void SetGeoMin(in double theMinSize);
- double GetGeoMin();
+ void SetAngleMesh(in double angle);
+ double GetAngleMesh();
/*!
- * Sets upper boundary of mesh element size computed to respect angular deflection
+ *Set the maximum desired distance between a triangle and its supporting CAD surface
*/
- void SetGeoMax(in double theMaxSize);
- double GetGeoMax();
+ void SetChordalError(in double distance);
+ double GetChordalError();
/*!
- * Sets maximal allowed ratio between the lengths of two adjacent edges
+ * Determines whether the generated mesh will be isotropic or anisotropic
*/
- void SetGradation(in double ratio);
- double GetGradation();
+ void SetAnisotropic(in boolean anisotropic);
+ boolean GetAnisotropic();
/*!
- * Sets to create quadrilateral elements or not
+ * Defines the maximum anisotropic ratio of the metric governing the anisotropic process.
+ * The default value of 0 means that the metric (and thus the generated elements)
+ * can be arbitrarily stretched.
*/
- void SetQuadAllowed(in boolean allowed);
- boolean GetQuadAllowed();
+ void SetAnisotropicRatio(in double ratio);
+ double GetAnisotropicRatio();
+
+ /*!
+ * This patch-independent correction option can be activated to remove the tiny
+ * (nano) edges from the generated mesh, without taking into account the tags
+ * (attributes) specifications.
+ */
+ void SetRemoveTinyEdges(in boolean remove);
+ boolean GetRemoveTinyEdges();
+
+ /*!
+ * Defines the minimal length under which an edge is considered to be a tiny one
+ */
+ void SetTinyEdgeLength(in double length);
+ double GetTinyEdgeLength();
+
+ /*!
+ * This patch-independent correction option can be activated to remove the tiny
+ * edges (defined by the option tiny edge optimisation length) from the generated
+ * mesh when it improves the local mesh quality, without taking into account the
+ * tags (attributes) specifications.
+ */
+ void SetOptimiseTinyEdges(in boolean toOptimise);
+ boolean GetOptimiseTinyEdges();
+
+ /*!
+ * Defines the minimal length under which an edge is considered to be a tiny one
+ * to be optimised out by the optimise tiny edges option
+ */
+ void SetTinyEdgeOptimisationLength(in double length);
+ double GetTinyEdgeOptimisationLength();
+
+ /*!
+ * Activate correction of all surface intersections
+ */
+ void SetCorrectSurfaceIntersection(in boolean toCorrect);
+ boolean GetCorrectSurfaceIntersection();
+
+ /*!
+ * Defines the time the user is ready to spend in the intersection prevention process.
+ * For example, maxCost = 3 means that MeshGems-CADSurf will not spend more time
+ * in the intersection removal process than 3 times the time required to mesh
+ * without processing the intersections.
+ */
+ void SetCorrectSurfaceIntersectionMaxCost(in double maxCost);
+ double GetCorrectSurfaceIntersectionMaxCost();
+
+ /*!
+ * This patch independent correction option can be activated to remove the bad
+ * elements (often called slivers) from the generated mesh, without taking into account
+ * the tags (attributes) specification.
+ */
+ void SetBadElementRemoval(in boolean remove);
+ boolean GetBadElementRemoval();
+
+ /*!
+ * This parameter defines the aspect ratio triggering the "bad element"
+ * classification for the force bad surface element removal option.
+ */
+ void SetBadElementAspectRatio(in double ratio);
+ double GetBadElementAspectRatio();
+
+ /*!
+ * If this option is activated, MeshGems-CADSurf will optimize the mesh in order to
+ * get better shaped elements, during a process which respects the patch independent options.
+ * This optimisation cannot be fully performed when correct_surface_intersections = 1.
+ */
+ void SetOptimizeMesh(in boolean optimize);
+ boolean GetOptimizeMesh();
+
+ /*!
+ * Determines the order of mesh elements to be generated (linear or quadratic)
+ */
+ void SetQuadraticMesh(in boolean quadratic);
+ boolean GetQuadraticMesh();
+
+ /*!
+ *Set topology usage way defining how mesh conformity is assured
+ * value=0 - mesh conformity is assured by conformity of a shape
+ * value=1,2 - mesh conformity is assured by pre-processing a CAD model (OBSOLETE)
+ * value=3 - mesh conformity is assured by pre-processing a CAD model with Pre-CAD
+ */
+ void SetTopology(in long way);
+ long GetTopology();
+
+
+ /*!
+ * Activate/deactivate surface proximity computation
+ */
+ void SetSurfaceProximity( in boolean toUse );
+ boolean GetSurfaceProximity();
+
+ /*!
+ * Set number of surface element layers to be generated due to surface proximity
+ */
+ void SetNbSurfaceProximityLayers( in short nbLayers );
+ short GetNbSurfaceProximityLayers();
+
+ /*!
+ * Set coefficient by which size of element refined due to surface proximity is increased
+ */
+ void SetSurfaceProximityRatio( in double ratio );
+ double GetSurfaceProximityRatio();
/*!
- * To respect geometrical edges or not
+ * Activate/deactivate volume proximity computation
*/
- void SetDecimesh(in boolean toIgnoreEdges);
- boolean GetDecimesh();
+ void SetVolumeProximity( in boolean toUse );
+ boolean GetVolumeProximity();
/*!
- * Sets verbosity level in the range 0 to 100.
+ * Set number of surface element layers to be generated due to volume proximity
+ */
+ void SetNbVolumeProximityLayers( in short nbLayers );
+ short GetNbVolumeProximityLayers();
+
+ /*!
+ * Set coefficient by which size of element refined due to volume proximity is increased
+ */
+ void SetVolumeProximityRatio( in double ratio );
+ double GetVolumeProximityRatio();
+
+ /*!
+ * Set verbosity level in the range 0 to 10.
*/
void SetVerbosity(in short theVal) raises (SALOME::SALOME_Exception);
short GetVerbosity();
+ /*!
+ * Set/Get enforced 1D meshes
+ */
+ void SetEnforcedMeshes( in EnforcedMeshesList enforcedMeshes );
+ EnforcedMeshesList GetEnforcedMeshes();
+
+ /*!
+ * Set enforce_cad_edge_sizes parameter
+ *
+ * Relaxes the given sizemap constraint around CAD edges to allow a better
+ * element quality and a better geometric approximation. It is only useful in
+ * combination with the gradation option.
+ */
+ void SetEnforceCadEdgesSize( in boolean toEnforce );
+ boolean GetEnforceCadEdgesSize();
+
+ /*!
+ * Set jacobian_rectification_respect_geometry parameter
+ *
+ * While making the mesh quadratic, allows to lose the CAD-mesh associativity in order
+ * to correct elements with nagative Jacobian
+ */
+ void SetJacobianRectificationRespectGeometry( in boolean allowRectification );
+ boolean GetJacobianRectificationRespectGeometry();
+
+ /*!
+ * Set rectify_jacobian parameter
+ *
+ * While making the mesh quadratic, allow to fix nagative Jacobian surface elements
+ */
+ void SetJacobianRectification( in boolean allowRectification );
+ boolean GetJacobianRectification();
+
+ /*!
+ * Set use_deprecated_patch_mesher parameter (compatibility with older versions of Meshgems)
+ *
+ * the use_deprecated_patch_mesher parameter allows to keep the same behaviour than
+ * in salome < 8.3 (meshgems 2.1.11 instead of meshgems >= 2.4.5)
+ */
+ void SetUseDeprecatedPatchMesher( in boolean useDeprecatedPatchMesher );
+ boolean GetUseDeprecatedPatchMesher();
+
+ /*!
+ * Set max_number_of_points_per_patch parameter
+ *
+ * This parameter controls the maximum amount of points MeshGems-CADSurf is allowed
+ * to generate on a single CAD patch. For an automatic gestion of the memory, one
+ * can set this parameter to 0
+ */
+ void SetMaxNumberOfPointsPerPatch( in long nb ) raises (SALOME::SALOME_Exception);
+ long GetMaxNumberOfPointsPerPatch();
+
+
+ /*!
+ * Set max_number_of_threads parameter
+ *
+ * Set the maximum of threads to use for multithreading mesh computation.
+ */
+ void SetMaxNumberOfThreads( in long nb ) raises (SALOME::SALOME_Exception);
+ long GetMaxNumberOfThreads();
+
+ /*!
+ * Set respect_geometry parameter
+ *
+ * This patch independent option can be deactivated to allow MeshGems-CADSurf
+ * to lower the geometry accuracy in its patch independent process.
+ */
+ void SetRespectGeometry( in boolean toRespect );
+ boolean GetRespectGeometry();
+
+ /*!
+ * Set tiny_edges_avoid_surface_intersections parameter
+ *
+ * This option defines the priority between the tiny feature
+ * suppression and the surface intersection prevention.
+ */
+ void SetTinyEdgesAvoidSurfaceIntersections( in boolean toAvoidIntersection );
+ boolean GetTinyEdgesAvoidSurfaceIntersections();
+
+ /*!
+ * Set closed_geometry parameter parameter
+ *
+ * Describes whether the geometry is expected to be closed or not.
+ * When activated, this option helps MeshGems-PreCAD to treat the dirtiest geometries.
+ */
+ void SetClosedGeometry( in boolean isClosed );
+ boolean GetClosedGeometry();
+
+ /*!
+ * Set debug parameter
+ *
+ * Make MeshGems-CADSurf will be very verbose and will output some intermediate
+ * files in the working directory. This option is mainly meant for Distene support issues.
+ */
+ void SetDebug( in boolean isDebug );
+ boolean GetDebug();
+
+ /*!
+ * Set periodic_tolerance parameter
+ *
+ * This parameter defines the maximum size difference between two periodic edges
+ * and also the maximum distance error between two periodic entities.
+ */
+ void SetPeriodicTolerance( in double tol ) raises (SALOME::SALOME_Exception);
+ double GetPeriodicTolerance() raises (SALOME::SALOME_Exception);
+
+ /*!
+ * Set required_entities parameter
+ *
+ * The required entities control the correction operations.
+ * Accepted values for this parameter are :
+ * - "respect" : MeshGems-CADSurf is not allowed to alter any required entity,
+ * even for correction purposes,
+ * - "ignore" : MeshGems-CADSurf will ignore the required entities in its processing,
+ * - "clear" : MeshGems-CADSurf will clear any required status for the entities.
+ * There will not be any entity marked as required in the generated mesh.
+ */
+ void SetRequiredEntities( in string howToTreat ) raises (SALOME::SALOME_Exception);
+ string GetRequiredEntities();
+
+ /*!
+ * Set sewing_tolerance parameter
+ *
+ * This parameter is the tolerance of the assembly.
+ */
+ void SetSewingTolerance( in double tol ) raises (SALOME::SALOME_Exception);
+ double GetSewingTolerance() raises (SALOME::SALOME_Exception);
+
+ /*!
+ * Set tags parameter
+ *
+ * The tag (attribute) system controls the optimisation process.
+ * Accepted values for this parameter are :
+ * - "respect" : the CAD tags will be preserved and unaltered by the optimisation operations,
+ * - "ignore" : the CAD tags will be ignored by the optimisation operations
+ * but they will still be present in the output mesh,
+ * - "clear" : MeshGems-CADSurf will clear any tag on any entity and optimise accordingly.
+ * There will not be any tag in the generated mesh.
+ */
+ void SetTags( in string howToTreat ) raises (SALOME::SALOME_Exception);
+ string GetTags();
+
+ /*!
+ * Set hyper-patches
+ */
+ void SetHyperPatches(in THyperPatchList hpl);
+ THyperPatchList GetHyperPatches( in GEOM::GEOM_Object mainShape );
+ void SetHyperPatchShapes(in THyperPatchShapesList hpsl);
+ THyperPatchEntriesList GetHyperPatchShapes();
+ void SetHyperPatchEntries(in THyperPatchEntriesList hpel);
+
/*!
* To merges edges.
*/
boolean GetPreCADMergeEdges();
/*!
- * To remove nano edges.
+ * To remove duplicate CAD faces.
*/
- void SetPreCADRemoveNanoEdges(in boolean toRemoveNanoEdges);
- boolean GetPreCADRemoveNanoEdges();
+ void SetPreCADRemoveDuplicateCADFaces(in boolean toRemoveDuplicateCADFaces);
+ boolean GetPreCADRemoveDuplicateCADFaces();
/*!
- * To compute topology from scratch
+ * To process 3D topology.
*/
- void SetPreCADDiscardInput(in boolean toDiscardInput);
- boolean GetPreCADDiscardInput();
+ void SetPreCADProcess3DTopology(in boolean toProcess);
+ boolean GetPreCADProcess3DTopology();
+
/*!
- * Sets the length below which an edge is considered as nano
- * for the topology processing.
+ * To compute topology from scratch
*/
- void SetPreCADEpsNano(in double epsNano);
- double GetPreCADEpsNano();
+ void SetPreCADDiscardInput(in boolean toDiscardInput);
+ boolean GetPreCADDiscardInput();
/*!
- * Sets advanced option value
+ *Set advanced option value
*/
void SetOptionValue(in string optionName,
in string optionValue) raises (SALOME::SALOME_Exception);
void UnsetOption(in string optionName);
void UnsetPreCADOption(in string optionName);
+ /*!
+ * Adds custom advanced option and its value
+ */
+ void SetAdvancedOption(in string optionsAndValues) // in a form "option_1 v1 option_2 v2'"
+ raises (SALOME::SALOME_Exception);
+ void AddOption(in string optionName, in string optionValue);
+ void AddPreCADOption(in string optionName, in string optionValue);
+ string GetOption(in string optionName);
+ string GetPreCADOption(in string optionName);
+
/*!
* Return array of strings each of which is option name concatenated
- * with option value devided by semicolon - "option_name:option_value".
+ * with option value devided by semicolon - "option_name:option_value:option_type".
* Option value is empty if an option is not set.
+ * option_type: 1 if user-define, 0 if default
* Note: the method is mostly for interaction with GUI.
*/
string_array GetOptionValues();
string_array GetPreCADOptionValues();
+ string_array GetAdvancedOptionValues();
/*!
- * Set option values each in the form "option_name[:option_value]".
+ * Set option values each in the form "option_name[:option_value][:option_type]".
* Note: the method is mostly for interaction with GUI.
*/
- void SetOptionValues(in string_array options);
- void SetPreCADOptionValues(in string_array options);
+ void SetOptionValues(in string_array options) raises (SALOME::SALOME_Exception);
+ void SetPreCADOptionValues(in string_array options) raises (SALOME::SALOME_Exception);
+ void SetAdvancedOptionValues(in string_array options);
/*!
* SizeMap
*/
- void SetSizeMapEntries(in string_array sizeMaps);
+ void SetSizeMapEntries(in string_array sizeMaps) raises (SALOME::SALOME_Exception);
void ClearSizeMaps();
void UnsetEntry(in string entry);
/*!
* Set/unset a SizeMap on geom object
*/
- void SetSizeMap(in GEOM::GEOM_Object GeomObj, in string sizeMap);
+ void SetSizeMap(in GEOM::GEOM_Object GeomObj, in string sizeMap) raises (SALOME::SALOME_Exception);
+ void SetConstantSizeMap(in GEOM::GEOM_Object GeomObj, in double sizeMap);
void UnsetSizeMap(in GEOM::GEOM_Object GeomObj);
/*!
* Set a SizeMap on geom object given by entry
*/
- void SetSizeMapEntry(in string entry, in string sizeMap);
- string GetSizeMapEntry(in string entry);
+ void SetSizeMapEntry(in string entry, in string sizeMap) raises (SALOME::SALOME_Exception);
+ void SetConstantSizeMapEntry(in string entry, in GEOM::shape_type shapeType, in double sizeMap) raises (SALOME::SALOME_Exception);
+ string GetSizeMapEntry(in string entry) raises (SALOME::SALOME_Exception);
string_array GetSizeMapEntries();
/*!
/*!
* Set an attractor on geom object given by entry
*/
- void SetAttractorEntry(in string entry, in string attractor);
- string GetAttractorEntry(in string entry);
+ void SetAttractorEntry(in string entry, in string attractor) raises (SALOME::SALOME_Exception);
+ string GetAttractorEntry(in string entry) raises (SALOME::SALOME_Exception);
string_array GetAttractorEntries();
/*!
* Set/unset an attractor given as geom object on another geom object
*/
void SetAttractorGeom(in GEOM::GEOM_Object GeomObj, in GEOM::GEOM_Object AttractorShape, in double StartSize, in double EndSize, in double ActionRadius, in double ConstantRadius);
- void UnsetAttractorGeom(in GEOM::GEOM_Object GeomObj);
+ void UnsetAttractorGeom(in GEOM::GEOM_Object GeomObj, in GEOM::GEOM_Object AttractorShape);
+ void UnsetAttractorEntry(in string entry, in string attractor);
/*!
* Set an attractor given by entry on a geom object given by entry
*/
- void SetClassAttractorEntry(in string entry, in string att_entry, in double StartSize, in double EndSize, in double ActionRadius, in double ConstantRadius );
+ void SetClassAttractorEntry(in string entry, in string att_entry, in double StartSize, in double EndSize, in double ActionRadius, in double ConstantRadius ) raises (SALOME::SALOME_Exception);
BLSURFPlugin::TAttParamsMap GetAttractorParams();
/*
/*!
* Set/get/unset an enforced vertex on geom face
*/
+ // OBSOLETE
boolean SetEnforcedVertex(in GEOM::GEOM_Object theFace, in double x, in double y, in double z) raises (SALOME::SALOME_Exception);
boolean SetEnforcedVertexNamed(in GEOM::GEOM_Object theFace, in double x, in double y, in double z, in TEnfName theVertexName) raises (SALOME::SALOME_Exception);
boolean SetEnforcedVertexGeom(in GEOM::GEOM_Object theFace, in GEOM::GEOM_Object theVertex) raises (SALOME::SALOME_Exception);
boolean SetEnforcedVertexNamedWithGroup(in GEOM::GEOM_Object theFace, in double x, in double y, in double z, in TEnfName theVertexName, in TEnfGroupName groupName) raises (SALOME::SALOME_Exception);
boolean SetEnforcedVertexGeomWithGroup(in GEOM::GEOM_Object theFace, in GEOM::GEOM_Object theVertex, in TEnfGroupName groupName) raises (SALOME::SALOME_Exception);
-
TEnfVertexList GetEnforcedVertices(in GEOM::GEOM_Object theFace) raises (SALOME::SALOME_Exception);
-
boolean UnsetEnforcedVertex(in GEOM::GEOM_Object theFace, in double x, in double y, in double z) raises (SALOME::SALOME_Exception);
boolean UnsetEnforcedVertexGeom(in GEOM::GEOM_Object theFace, in GEOM::GEOM_Object theVertex) raises (SALOME::SALOME_Exception);
boolean UnsetEnforcedVertices(in GEOM::GEOM_Object theFace) raises (SALOME::SALOME_Exception);
- /*!
- * Set/get/unset an enforced vertex on geom face given by entry
- */
- boolean SetEnforcedVertexEntry(in TEntry theFaceEntry, in double x, in double y, in double z,
+ // NEW - no face
+ boolean AddEnforcedVertex(in double x, in double y, in double z) raises (SALOME::SALOME_Exception);
+ boolean AddEnforcedVertexNamed(in double x, in double y, in double z, in TEnfName theVertexName) raises (SALOME::SALOME_Exception);
+ boolean AddEnforcedVertexGeom(in GEOM::GEOM_Object theVertex) raises (SALOME::SALOME_Exception);
+ boolean AddEnforcedVertexWithGroup(in double x, in double y, in double z, in TEnfGroupName groupName) raises (SALOME::SALOME_Exception);
+ boolean AddEnforcedVertexNamedWithGroup(in double x, in double y, in double z, in TEnfName theVertexName, in TEnfGroupName groupName) raises (SALOME::SALOME_Exception);
+ boolean AddEnforcedVertexGeomWithGroup(in GEOM::GEOM_Object theVertex, in TEnfGroupName groupName) raises (SALOME::SALOME_Exception);
+
+ boolean RemoveEnforcedVertex(in double x, in double y, in double z) raises (SALOME::SALOME_Exception);
+ boolean RemoveEnforcedVertexGeom(in GEOM::GEOM_Object theVertex) raises (SALOME::SALOME_Exception);
+ boolean RemoveEnforcedVertices() raises (SALOME::SALOME_Exception);
+
+ /*!
+ * Set/get/unset an enforced vertex on geom face given by entry
+ */
+ boolean SetEnforcedVertexEntry(in TEntry theFaceEntry, in double x, in double y, in double z,
in TEnfName theVertexName, in TEntry theVertexEntry, in TEnfGroupName groupName) raises (SALOME::SALOME_Exception);
TEnfVertexList GetEnforcedVerticesEntry(in TEntry theFaceEntry) raises (SALOME::SALOME_Exception);
// TFaceEntryInternalVerticesList GetAllInternalEnforcedVerticesFaces();
///////////////////////
+
+ ///////////////////////
+ // PERIODICITY //
+ ///////////////////////
+
+ void ClearPreCadPeriodicityVectors();
+ void AddPreCadFacesPeriodicity(in GEOM::GEOM_Object theFace1, in GEOM::GEOM_Object theFace2) raises (SALOME::SALOME_Exception);
+ void AddPreCadFacesPeriodicityWithVertices(in GEOM::GEOM_Object theFace1, in GEOM::GEOM_Object theFace2, in GEOM::ListOfGO theSourceVertices, in GEOM::ListOfGO theTargetVertices) raises (SALOME::SALOME_Exception);
+ void AddPreCadFacesPeriodicityEntry(in TEntry theFace1, in TEntry theFace2, in TEntryList theSourceVertices, in TEntryList theTargetVertices) raises (SALOME::SALOME_Exception);
+ void AddPreCadEdgesPeriodicity(in GEOM::GEOM_Object theEdge1, in GEOM::GEOM_Object theEdge2) raises (SALOME::SALOME_Exception);
+ void AddPreCadEdgesPeriodicityWithVertices(in GEOM::GEOM_Object theEdge1, in GEOM::GEOM_Object theEdge2, in GEOM::ListOfGO theSourceVertices, in GEOM::ListOfGO theTargetVertices) raises (SALOME::SALOME_Exception);
+ void AddPreCadEdgesPeriodicityEntry(in TEntry theEdge1, in TEntry theEdge2, in TEntryList theSourceVertices, in TEntryList theTargetVertices) raises (SALOME::SALOME_Exception);
+ TPeriodicityList GetPreCadFacesPeriodicityVector();
+ TPeriodicityList GetPreCadEdgesPeriodicityVector();
+ ///////////////////////
+
/*!
- * Sets the file for export resulting mesh in GMF format
+ *Set the file for export resulting mesh in GMF format
*/
-// void SetGMFFile(in string theFileName, in boolean isBinary);
void SetGMFFile(in string theFileName);
string GetGMFFile();
-// boolean GetGMFFileMode();
};
};
