#----------------------
from HYDROPy import *
-from PyQt4.QtCore import *
-from PyQt4.QtGui import *
+from PyQt5.QtCore import *
+from PyQt5.QtGui import *
hydro_doc = HYDROData_Document.Document( theStudy._get_StudyId() )
# Calculation case
-garonne_2 = hydro_doc.CreateObject( KIND_CALCULATION )
-garonne_2.SetName( "garonne_2" )
+garonne_1 = hydro_doc.CreateObject( KIND_CALCULATION )
+garonne_1.SetName( "garonne_1" )
-garonne_2.SetAssignmentMode( HYDROData_CalculationCase.MANUAL )
-garonne_2.AddGeometryObject( litMineur )
-garonne_2.AddGeometryObject( domaineEtendu )
-garonne_2.AddGeometryObject( litMajeur )
-garonne_2.AddGeometryObject( digue );
+garonne_1.SetAssignmentMode( HYDROData_CalculationCase.MANUAL )
+garonne_1.AddGeometryObject( litMineur )
+garonne_1.AddGeometryObject( domaineEtendu )
+garonne_1.AddGeometryObject( litMajeur )
+garonne_1.AddGeometryObject( digue );
case_geom_group = domaineEtendu.GetGroup( 0 );
-garonne_2.AddGeometryGroup( case_geom_group );
+garonne_1.AddGeometryGroup( case_geom_group );
case_geom_group = litMineur.GetGroup( 0 );
-garonne_2.AddGeometryGroup( case_geom_group );
+garonne_1.AddGeometryGroup( case_geom_group );
case_geom_group = litMajeur.GetGroup( 0 );
-garonne_2.AddGeometryGroup( case_geom_group );
+garonne_1.AddGeometryGroup( case_geom_group );
case_geom_group = digue.GetGroup( 2 );
-garonne_2.AddGeometryGroup( case_geom_group );
+garonne_1.AddGeometryGroup( case_geom_group );
case_geom_group = digue.GetGroup( 0 );
-garonne_2.AddGeometryGroup( case_geom_group );
+garonne_1.AddGeometryGroup( case_geom_group );
case_geom_group = digue.GetGroup( 3 );
-garonne_2.AddGeometryGroup( case_geom_group );
+garonne_1.AddGeometryGroup( case_geom_group );
case_geom_group = digue.GetGroup( 1 );
-garonne_2.AddGeometryGroup( case_geom_group );
-garonne_2.SetBoundaryPolyline( domaine );
+garonne_1.AddGeometryGroup( case_geom_group );
+garonne_1.SetBoundaryPolyline( domaine );
# Start the algorithm of the partition and assignment
-garonne_2.Update();
-garonne_2_litMineur = hydro_doc.FindObjectByName( "garonne_2_Reg_1" );
-garonne_2_Zone_1 = hydro_doc.FindObjectByName( "garonne_2_Zone_1" );
-garonne_2_Zone_1.SetMergeType( HYDROData_Zone.Merge_ZMIN )
-garonne_2_litMineur.AddZone( garonne_2_Zone_1 );
-garonne_2_riveDroite = hydro_doc.FindObjectByName( "garonne_2_Reg_2" );
-garonne_2_Zone_2 = hydro_doc.FindObjectByName( "garonne_2_Zone_2" );
-garonne_2_riveDroite.AddZone( garonne_2_Zone_2 );
-garonne_2_Zone_3 = hydro_doc.FindObjectByName( "garonne_2_Zone_3" );
-garonne_2_riveDroite.AddZone( garonne_2_Zone_3 );
-garonne_2_riveGauche = hydro_doc.FindObjectByName( "garonne_2_Reg_3" );
-garonne_2_Zone_4 = hydro_doc.FindObjectByName( "garonne_2_Zone_4" );
-garonne_2_riveGauche.AddZone( garonne_2_Zone_4 );
-garonne_2_Zone_5 = hydro_doc.FindObjectByName( "garonne_2_Zone_5" );
-garonne_2_riveGauche.AddZone( garonne_2_Zone_5 );
-garonne_2_digue = hydro_doc.FindObjectByName( "garonne_2_Reg_4" );
-garonne_2_Zone_6 = hydro_doc.FindObjectByName( "garonne_2_Zone_6" );
-garonne_2_Zone_6.SetMergeType( HYDROData_Zone.Merge_ZMAX )
-garonne_2_digue.AddZone( garonne_2_Zone_6 );
-
-garonne_2_litMineur.SetName("garonne_2_litMineur")
-garonne_2_riveDroite.SetName("garonne_2_riveDroite")
-garonne_2_riveGauche.SetName("garonne_2_riveGauche")
-garonne_2_digue.SetName("garonne_2_digue")
+garonne_1.Update();
+
+garonne_1_litMineur = hydro_doc.FindObjectByName( "garonne_1_Reg_1" )
+garonne_1_Zone_1 = hydro_doc.FindObjectByName( "garonne_1_Zone_1" )
+garonne_1_Zone_1.SetMergeType( HYDROData_Zone.Merge_ZMIN )
+garonne_1_Zone_1.SetColor( QColor( 192, 137, 64 ))
+garonne_1_litMineur.AddZone( garonne_1_Zone_1 )
+
+garonne_1_riveDroite = hydro_doc.FindObjectByName( "garonne_1_Reg_2" )
+garonne_1_Zone_2 = hydro_doc.FindObjectByName( "garonne_1_Zone_2" )
+garonne_1_Zone_2.SetColor( QColor( 64, 192, 98 ))
+garonne_1_riveDroite.AddZone( garonne_1_Zone_2 )
+
+garonne_1_Zone_3 = hydro_doc.FindObjectByName( "garonne_1_Zone_3" )
+garonne_1_Zone_3.SetMergeType( HYDROData_Zone.Merge_Object )
+Cloud_02 = hydro_doc.FindObjectByName( "Cloud_02" )
+garonne_1_Zone_3.SetMergeObject( Cloud_02 )
+garonne_1_Zone_3.SetColor( QColor( 64, 66, 192 ))
+garonne_1_riveDroite.AddZone( garonne_1_Zone_3 )
+
+garonne_1_riveGauche = hydro_doc.FindObjectByName( "garonne_1_Reg_3" )
+garonne_1_Zone_4 = hydro_doc.FindObjectByName( "garonne_1_Zone_4" )
+garonne_1_Zone_4.SetMergeType( HYDROData_Zone.Merge_Object )
+Cloud_02 = hydro_doc.FindObjectByName( "Cloud_02" )
+garonne_1_Zone_4.SetMergeObject( Cloud_02 )
+garonne_1_Zone_4.SetColor( QColor( 64, 192, 164 ))
+garonne_1_riveGauche.AddZone( garonne_1_Zone_4 )
+
+garonne_1_Zone_5 = hydro_doc.FindObjectByName( "garonne_1_Zone_5" )
+garonne_1_Zone_5.SetColor( QColor( 192, 149, 64 ))
+garonne_1_riveGauche.AddZone( garonne_1_Zone_5 )
+
+garonne_1_digue = hydro_doc.FindObjectByName( "garonne_1_Reg_4" )
+garonne_1_Zone_6 = hydro_doc.FindObjectByName( "garonne_1_Zone_6" )
+garonne_1_Zone_6.SetMergeType( HYDROData_Zone.Merge_ZMAX )
+garonne_1_Zone_6.SetColor( QColor( 64, 192, 177 ))
+garonne_1_digue.AddZone( garonne_1_Zone_6 )
+
+garonne_1_litMineur.SetName("garonne_1_litMineur")
+garonne_1_riveDroite.SetName("garonne_1_riveDroite")
+garonne_1_riveGauche.SetName("garonne_1_riveGauche")
+garonne_1_digue.SetName("garonne_1_digue")
# Export of the calculation case
-garonne_2_entry = garonne_2.Export( theStudy._get_StudyId() )
+garonne_1_entry = garonne_1.Export( theStudy._get_StudyId() )
#----------------------
# --- Geometry
geompy = geomBuilder.New(theStudy)
-print "Entry:", garonne_2_entry
-HYDRO_garonne_2 = salome.IDToObject( str( garonne_2_entry ) )
-print "Geom shape:", HYDRO_garonne_2
-print "Geom shape name:", HYDRO_garonne_2.GetName()
-
-[riveGauche,digue,litMineur,riveDroite] = geompy.ExtractShapes(HYDRO_garonne_2, geompy.ShapeType["FACE"], True)
-geompy.addToStudyInFather( HYDRO_garonne_2, riveGauche, 'riveGauche' )
-geompy.addToStudyInFather( HYDRO_garonne_2, digue, 'digue' )
-geompy.addToStudyInFather( HYDRO_garonne_2, litMineur, 'litMineur' )
-geompy.addToStudyInFather( HYDRO_garonne_2, riveDroite, 'riveDroite' )
-
-SectionsGaronne = geompy.CreateGroup(HYDRO_garonne_2, geompy.ShapeType["EDGE"])
-geompy.UnionIDs(SectionsGaronne, [4, 11])
-geompy.addToStudyInFather( HYDRO_garonne_2, SectionsGaronne, 'SectionsGaronne' )
-
-SectionsDigue = geompy.CreateGroup(HYDRO_garonne_2, geompy.ShapeType["EDGE"])
-geompy.UnionIDs(SectionsDigue, [46, 50])
-geompy.addToStudyInFather( HYDRO_garonne_2, SectionsDigue, 'SectionsDigue' )
-
-# --- recreate subshapes already exported from HYDRO to get access from Python
-#garonne_2_domaineEtendu_Outer = geompy.CreateGroup(HYDRO_garonne_2, geompy.ShapeType["EDGE"])
-#geompy.UnionIDs(garonne_2_domaineEtendu_Outer, [4, 11, 17, 24, 26, 28, 14, 19, 20, 22, 31, 39, 41, 33, 35, 37])
-#garonne_2_digue_Left_Bank = geompy.CreateGroup(HYDRO_garonne_2, geompy.ShapeType["EDGE"])
-#geompy.UnionIDs(garonne_2_digue_Left_Bank, [43])
-#garonne_2_digue_Outlet = geompy.CreateGroup(HYDRO_garonne_2, geompy.ShapeType["EDGE"])
-#geompy.UnionIDs(garonne_2_digue_Outlet, [46])
-#garonne_2_digue_Inlet = geompy.CreateGroup(HYDRO_garonne_2, geompy.ShapeType["EDGE"])
-#geompy.UnionIDs(garonne_2_digue_Inlet, [50])
-#garonne_2_litMineur_Outer = geompy.CreateGroup(HYDRO_garonne_2, geompy.ShapeType["EDGE"])
-#geompy.UnionIDs(garonne_2_litMineur_Outer, [7, 9])
-#garonne_2_digue_Right_Bank = geompy.CreateGroup(HYDRO_garonne_2, geompy.ShapeType["EDGE"])
-#geompy.UnionIDs(garonne_2_digue_Right_Bank, [48])
-
-#controlGeomProps(geompy, riveGauche, 39489.5116033, 35889668.8348)
-#controlGeomProps(geompy, digue, 10340.1424233, 102887.6201)
-#controlGeomProps(geompy, litMineur, 30337.5484919, 3646827.74981)
-#controlGeomProps(geompy, riveDroite, 32012.3432411, 26177085.4601)
-controlGeomProps(geompy, riveGauche, 39493.270283, 35845790.613557)
-controlGeomProps(geompy, digue, 10340.1424233, 102887.6201)
-controlGeomProps(geompy, litMineur, 30337.548492, 3488480.304388)
-controlGeomProps(geompy, riveDroite, 32012.343241, 25998769.23615)
+print "Entry:", garonne_1_entry
+HYDRO_garonne_1 = salome.IDToObject( str( garonne_1_entry ) )
+print "Geom shape:", HYDRO_garonne_1
+print "Geom shape name:", HYDRO_garonne_1.GetName()
+
+
+[garonne_riveGauche,garonne_digue,garonne_litMineur,garonne_riveDroite] = geompy.ExtractShapes(HYDRO_garonne_1, geompy.ShapeType["FACE"], True)
+
+controlGeomProps(geompy, garonne_riveGauche, 39490.835288, 35845737.590926)
+controlGeomProps(geompy, garonne_digue, 10341.466108, 103090.760662)
+controlGeomProps(geompy, garonne_litMineur, 30337.548492, 3488480.304388)
+controlGeomProps(geompy, garonne_riveDroite, 32012.343241, 25998769.23615)
+
+# --- manual identification of all useful edge groups (boundary conditions)
+
+allEdgesIds = geompy.SubShapeAllIDs(HYDRO_garonne_1, geompy.ShapeType["EDGE"])
+print "allEdgesIds", allEdgesIds
+
+(isDone, ClosedFreeBoundary, OpenFreeBoundary) = geompy.GetFreeBoundary(HYDRO_garonne_1)
+geompy.addToStudyInFather(HYDRO_garonne_1, ClosedFreeBoundary[0], "ClosedFreeBoundary")
+
+freeBoundary = geompy.ExtractShapes(ClosedFreeBoundary[0], geompy.ShapeType["EDGE"], True)
+freeBoundaryIds = [ geompy.GetSubShapeID(HYDRO_garonne_1, freeBoundary[i]) for i in range(len(freeBoundary)) ]
+print "freeBoundaryIds", freeBoundaryIds
+
+[litMineur_droite] = geompy.GetSharedShapesMulti([garonne_riveDroite, garonne_litMineur], geompy.ShapeType["EDGE"], True)
+[litMineur_gauche] = geompy.GetSharedShapesMulti([garonne_riveGauche, garonne_litMineur], geompy.ShapeType["EDGE"], True)
+geompy.addToStudyInFather(HYDRO_garonne_1, litMineur_droite, "litMineur_droite")
+geompy.addToStudyInFather(HYDRO_garonne_1, litMineur_gauche, "litMineur_gauche")
+rives = [litMineur_droite, litMineur_gauche]
+rivesIds = [ geompy.GetSubShapeID(HYDRO_garonne_1, rives[i]) for i in range(len(rives)) ]
+print "rivesIds", rivesIds
+
+edges_litMineur = geompy.GetSharedShapesMulti([HYDRO_garonne_1, garonne_litMineur], geompy.ShapeType["EDGE"], True)
+edges_riveGauche = geompy.GetSharedShapesMulti([HYDRO_garonne_1, garonne_riveGauche], geompy.ShapeType["EDGE"], True)
+edges_riveDroite = geompy.GetSharedShapesMulti([HYDRO_garonne_1, garonne_riveDroite], geompy.ShapeType["EDGE"], True)
+edges_litMineurIds = [ geompy.GetSubShapeID(HYDRO_garonne_1, edges_litMineur[i]) for i in range(len(edges_litMineur)) ]
+edges_riveGaucheIds = [ geompy.GetSubShapeID(HYDRO_garonne_1, edges_riveGauche[i]) for i in range(len(edges_riveGauche)) ]
+edges_riveDroiteIds = [ geompy.GetSubShapeID(HYDRO_garonne_1, edges_riveDroite[i]) for i in range(len(edges_riveDroite)) ]
+
+print "edges_litMineurIds", edges_litMineurIds
+print "edges_riveGaucheIds", edges_riveGaucheIds
+print "edges_riveDroiteIds", edges_riveDroiteIds
+
+sectionsIds = [Id for Id in edges_litMineurIds if Id not in rivesIds]
+print "sectionsIds", sectionsIds
+SectionsGaronne = geompy.CreateGroup(HYDRO_garonne_1, geompy.ShapeType["EDGE"])
+geompy.UnionIDs(SectionsGaronne, sectionsIds)
+geompy.addToStudyInFather(HYDRO_garonne_1, SectionsGaronne, "SectionsGaronne")
+
+bordGaucheDomaineIds = [Id for Id in freeBoundaryIds if Id in edges_riveGaucheIds]
+bordDroiteDomaineIds = [Id for Id in freeBoundaryIds if Id in edges_riveDroiteIds]
+print "bordGaucheDomaineIds", bordGaucheDomaineIds
+print "bordDroiteDomaineIds", bordDroiteDomaineIds
+bordGaucheDomaine = geompy.CreateGroup(HYDRO_garonne_1, geompy.ShapeType["EDGE"])
+geompy.UnionIDs(bordGaucheDomaine, bordGaucheDomaineIds)
+geompy.addToStudyInFather(HYDRO_garonne_1, bordGaucheDomaine, "bordGaucheDomaine")
+bordDroiteDomaine = geompy.CreateGroup(HYDRO_garonne_1, geompy.ShapeType["EDGE"])
+geompy.UnionIDs(bordDroiteDomaine, bordDroiteDomaineIds)
+geompy.addToStudyInFather(HYDRO_garonne_1, bordDroiteDomaine, "bordDroiteDomaine")
+
+amont = geompy.GetEdgeNearPoint(HYDRO_garonne_1, geompy.MakeVertex(46757.861314, 25833.234752, 0))
+aval = geompy.GetEdgeNearPoint(HYDRO_garonne_1, geompy.MakeVertex(39078.979127, 32588.627279, 0))
+geompy.addToStudyInFather(HYDRO_garonne_1, amont, "amont")
+geompy.addToStudyInFather(HYDRO_garonne_1, aval, "aval")
+
+amontDigue = geompy.GetEdgeNearPoint(HYDRO_garonne_1, geompy.MakeVertex(44736.43, 29847.52, 0))
+avalDigue = geompy.GetEdgeNearPoint(HYDRO_garonne_1, geompy.MakeVertex(40961.39, 31800.95, 0))
+geompy.addToStudyInFather(HYDRO_garonne_1, amontDigue, "amontDigue")
+geompy.addToStudyInFather(HYDRO_garonne_1, avalDigue, "avalDigue")
+
+SectionsDigue = geompy.CreateGroup(HYDRO_garonne_1, geompy.ShapeType["EDGE"])
+geompy.UnionIDs(SectionsDigue, [geompy.GetSubShapeID(HYDRO_garonne_1, amontDigue), geompy.GetSubShapeID(HYDRO_garonne_1, avalDigue)])
+geompy.addToStudyInFather( HYDRO_garonne_1, SectionsDigue, 'SectionsDigue' )
#----------------------
# --- Meshing
import SMESH, SALOMEDS
from salome.smesh import smeshBuilder
from salome.hydrotools.controls import controlMeshStats, controlSubMeshStats
+import tempfile
smesh = smeshBuilder.New(theStudy)
# --- algorithms and hypothesis
-garonne_2 = smesh.Mesh(HYDRO_garonne_2)
+garonne_1 = smesh.Mesh(HYDRO_garonne_1)
-NETGEN_2D = garonne_2.Triangle(algo=smeshBuilder.NETGEN_1D2D)
+NETGEN_2D = garonne_1.Triangle(algo=smeshBuilder.NETGEN_1D2D)
NETGEN_2D_Parameters = NETGEN_2D.Parameters()
NETGEN_2D_Parameters.SetMaxSize( 200 )
NETGEN_2D_Parameters.SetSecondOrder( 0 )
NETGEN_2D_Parameters.SetFuseEdges( 1 )
NETGEN_2D_Parameters.SetQuadAllowed( 0 )
-algo2D_litMineur = garonne_2.Quadrangle(algo=smeshBuilder.QUAD_MA_PROJ,geom=litMineur)
-algo1D_litMineur = garonne_2.Segment(geom=litMineur)
+algo2D_litMineur = garonne_1.Quadrangle(algo=smeshBuilder.QUAD_MA_PROJ,geom=garonne_litMineur)
+algo1D_litMineur = garonne_1.Segment(geom=garonne_litMineur)
hypo1D_litMineur = algo1D_litMineur.LocalLength(100,None,1e-07)
subMesh_litMineur = algo1D_litMineur.GetSubMesh()
smesh.SetName(subMesh_litMineur, "litMineur")
-algo1D_SectionsGaronne = garonne_2.Segment(geom=SectionsGaronne)
+algo1D_SectionsGaronne = garonne_1.Segment(geom=SectionsGaronne)
hypo1D_SectionsGaronne = algo1D_SectionsGaronne.NumberOfSegments(8)
hypo1D_SectionsGaronne.SetDistrType( 0 )
subMesh_SectionsGaronne = algo1D_SectionsGaronne.GetSubMesh()
smesh.SetName(subMesh_SectionsGaronne, "SectionsGaronne")
-algo2D_digue = garonne_2.Quadrangle(algo=smeshBuilder.QUAD_MA_PROJ,geom=digue)
-algo1D_digue = garonne_2.Segment(geom=digue)
+algo2D_digue = garonne_1.Quadrangle(algo=smeshBuilder.QUAD_MA_PROJ,geom=garonne_digue)
+algo1D_digue = garonne_1.Segment(geom=garonne_digue)
hypo1D_digue = algo1D_digue.LocalLength(50,None,1e-07)
subMesh_digue = algo1D_digue.GetSubMesh()
smesh.SetName(subMesh_digue, "digue")
-algo1D_SectionsDigue = garonne_2.Segment(geom=SectionsDigue)
+algo1D_SectionsDigue = garonne_1.Segment(geom=SectionsDigue)
hypo1D_SectionsDigue = algo1D_SectionsDigue.NumberOfSegments(4)
hypo1D_SectionsDigue.SetDistrType( 0 )
subMesh_SectionsDigue = algo1D_SectionsDigue.GetSubMesh()
smesh.SetName(subMesh_SectionsDigue, "SectionsDigue")
-isDone = garonne_2.SetMeshOrder( [ [ subMesh_SectionsGaronne, subMesh_litMineur ], [ subMesh_SectionsDigue, subMesh_digue ]])
+isDone = garonne_1.SetMeshOrder( [ [ subMesh_SectionsGaronne, subMesh_litMineur ], [ subMesh_SectionsDigue, subMesh_digue ]])
# --- compute mesh
-isDone = garonne_2.Compute()
-isDone = garonne_2.SplitQuadObject( garonne_2, 1 )
-isDone = garonne_2.ReorientObject( garonne_2 )
-
-# --- geometrical groups of edges
-#garonne_2_litMineur_Outer_1 = garonne_2.GroupOnGeom(garonne_2_litMineur_Outer,'garonne_2_litMineur_Outer',SMESH.EDGE)
-#garonne_2_domaineEtendu_Outer_1 = garonne_2.GroupOnGeom(garonne_2_domaineEtendu_Outer,'garonne_2_domaineEtendu_Outer',SMESH.EDGE)
-#aval_1 = garonne_2.GroupOnGeom(aval,'aval',SMESH.EDGE)
-#amont_1 = garonne_2.GroupOnGeom(amont,'amont',SMESH.EDGE)
-#bordGaucheDomaine_1 = garonne_2.GroupOnGeom(bordGaucheDomaine,'bordGaucheDomaine',SMESH.EDGE)
-#bordDroiteDomaine_1 = garonne_2.GroupOnGeom(bordDroiteDomaine,'bordDroiteDomaine',SMESH.EDGE)
-SectionsGaronne_2 = garonne_2.GroupOnGeom(SectionsGaronne,'SectionsGaronne',SMESH.EDGE)
-SectionsDigue_2 = garonne_2.GroupOnGeom(SectionsDigue,'SectionsDigue',SMESH.EDGE)
+isDone = garonne_1.Compute()
+isDone = garonne_1.SplitQuadObject( garonne_1, 1 )
+isDone = garonne_1.ReorientObject( garonne_1 )
# --- geometrical groups of faces
-riveGauche_1 = garonne_2.GroupOnGeom(riveGauche,'riveGauche',SMESH.FACE)
-litMineur_2 = garonne_2.GroupOnGeom(litMineur,'litMineur',SMESH.FACE)
-riveDroite_1 = garonne_2.GroupOnGeom(riveDroite,'riveDroite',SMESH.FACE)
-digue_1 = garonne_2.GroupOnGeom(digue,'digue',SMESH.FACE)
+riveGauche_1 = garonne_1.GroupOnGeom(garonne_riveGauche,'riveGauche',SMESH.FACE)
+litMineur_1 = garonne_1.GroupOnGeom(garonne_litMineur,'litMineur',SMESH.FACE)
+riveDroite_1 = garonne_1.GroupOnGeom(garonne_riveDroite,'riveDroite',SMESH.FACE)
+digue_1 = garonne_1.GroupOnGeom(garonne_digue,'digue',SMESH.FACE)
+
+# --- geometrical groups of edges
+ClosedFreeBoundary_1 = garonne_1.GroupOnGeom(ClosedFreeBoundary[0],'ClosedFreeBoundary',SMESH.EDGE)
+litMineur_droite_1 = garonne_1.GroupOnGeom(litMineur_droite,'litMineur_droite',SMESH.EDGE)
+litMineur_gauche_1 = garonne_1.GroupOnGeom(litMineur_gauche,'litMineur_gauche',SMESH.EDGE)
+SectionsGaronne_1 = garonne_1.GroupOnGeom(SectionsGaronne,'SectionsGaronne',SMESH.EDGE)
+bordGaucheDomaine_1 = garonne_1.GroupOnGeom(bordGaucheDomaine,'bordGaucheDomaine',SMESH.EDGE)
+bordDroiteDomaine_1 = garonne_1.GroupOnGeom(bordDroiteDomaine,'bordDroiteDomaine',SMESH.EDGE)
+amont_1 = garonne_1.GroupOnGeom(amont,'amont',SMESH.EDGE)
+aval_1 = garonne_1.GroupOnGeom(aval,'aval',SMESH.EDGE)
+SectionsDigue_1 = garonne_1.GroupOnGeom(SectionsDigue,'SectionsDigue',SMESH.EDGE)
# --- geometrical groups of nodes
-#garonne_2_litMineur_Outer_2 = garonne_2.GroupOnGeom(garonne_2_litMineur_Outer,'garonne_2_litMineur_Outer',SMESH.NODE)
-#garonne_2_domaineEtendu_Outer_2 = garonne_2.GroupOnGeom(garonne_2_domaineEtendu_Outer,'garonne_2_domaineEtendu_Outer',SMESH.NODE)
-riveGauche_2 = garonne_2.GroupOnGeom(riveGauche,'riveGauche',SMESH.NODE)
-litMineur_3 = garonne_2.GroupOnGeom(litMineur,'litMineur',SMESH.NODE)
-riveDroite_2 = garonne_2.GroupOnGeom(riveDroite,'riveDroite',SMESH.NODE)
-digue_2 = garonne_2.GroupOnGeom(digue,'digue',SMESH.NODE)
-#aval_2 = garonne_2.GroupOnGeom(aval,'aval',SMESH.NODE)
-#amont_2 = garonne_2.GroupOnGeom(amont,'amont',SMESH.NODE)
-#bordGaucheDomaine_2 = garonne_2.GroupOnGeom(bordGaucheDomaine,'bordGaucheDomaine',SMESH.NODE)
-#bordDroiteDomaine_2 = garonne_2.GroupOnGeom(bordDroiteDomaine,'bordDroiteDomaine',SMESH.NODE)
-SectionsGaronne_3 = garonne_2.GroupOnGeom(SectionsGaronne,'SectionsGaronne',SMESH.NODE)
-
-
-med_file = r'/tmp/garonne_2.med'
-
-try:
- os.remove(med_file)
-except OSError:
- pass
-
-
-garonne_2.SetAutoColor( 1 )
-garonne_2.ExportMED( med_file, 0, SMESH.MED_V2_2, 1, None ,1)
-
-#controlMeshStats(garonne_2, 5247, 717, 10075)
-#controlSubMeshStats(litMineur_2, 2384)
-#controlSubMeshStats(riveDroite_1, 2348)
-#controlSubMeshStats(riveGauche_1, 5343)
-#controlSubMeshStats(digue_1, 0)
-controlMeshStats(garonne_2, 6190, 691, 12201)
-controlSubMeshStats(litMineur_2, 2384)
+garonne_1_litMineur_2 = garonne_1.GroupOnGeom(garonne_litMineur,'garonne_1_litMineur',SMESH.NODE)
+garonne_1_riveDroite_2 = garonne_1.GroupOnGeom(garonne_riveDroite,'garonne_1_riveDroite',SMESH.NODE)
+garonne_1_riveGauche_2 = garonne_1.GroupOnGeom(garonne_riveGauche,'garonne_1_riveGauche',SMESH.NODE)
+garonne_1_digue_2 = garonne_1.GroupOnGeom(garonne_digue,'garonne_1_digue',SMESH.NODE)
+ClosedFreeBoundary_2 = garonne_1.GroupOnGeom(ClosedFreeBoundary[0],'ClosedFreeBoundary',SMESH.NODE)
+litMineur_droite_2 = garonne_1.GroupOnGeom(litMineur_droite,'litMineur_droite',SMESH.NODE)
+litMineur_gauche_2 = garonne_1.GroupOnGeom(litMineur_gauche,'litMineur_gauche',SMESH.NODE)
+SectionsGaronne_2 = garonne_1.GroupOnGeom(SectionsGaronne,'SectionsGaronne',SMESH.NODE)
+bordGaucheDomaine_2 = garonne_1.GroupOnGeom(bordGaucheDomaine,'bordGaucheDomaine',SMESH.NODE)
+bordDroiteDomaine_2 = garonne_1.GroupOnGeom(bordDroiteDomaine,'bordDroiteDomaine',SMESH.NODE)
+amont_2 = garonne_1.GroupOnGeom(amont,'amont',SMESH.NODE)
+aval_2 = garonne_1.GroupOnGeom(aval,'aval',SMESH.NODE)
+SectionsDigue_2 = garonne_1.GroupOnGeom(SectionsDigue,'SectionsDigue',SMESH.NODE)
+
+garonne_1.SetAutoColor( 1 )
+tmpdir = tempfile.mkdtemp()
+print "tmpdir=",tmpdir
+fichierMaillage = os.path.join(tmpdir, 'garonne_1.med')
+garonne_1.ExportMED(fichierMaillage, 0, SMESH.MED_V2_2, 1, None ,1)
+
+mesures = garonne_1.GetMeshInfo()
+d= {}
+for key, value in mesures.iteritems():
+ d[str(key)] = value
+nbTriangles = d['Entity_Triangle']
+nbNodes = d['Entity_Node']
+
+controlMeshStats(garonne_1, 6190, 691, 12201)
+controlSubMeshStats(litMineur_1, 2384)
controlSubMeshStats(riveDroite_1, 2400)
controlSubMeshStats(riveGauche_1, 6585)
controlSubMeshStats(digue_1, 832)
if salome.sg.hasDesktop():
salome.sg.updateObjBrowser(1)
-
#----------------------
# --- Z interpolation with HYDRO
#----------------------
from salome.hydrotools.controls import controlStatZ
# --- case name in HYDRO
-nomCas = 'garonne_2'
-
-# --- med file 2D(x,y) of the case produced by SMESH
-fichierMaillage = med_file
+nomCas = 'garonne_1'
# --- dictionary [med group name] = region name
-dicoGroupeRegion= dict(litMineur = 'garonne_2_litMineur',
- riveDroite = 'garonne_2_riveDroite',
- riveGauche = 'garonne_2_riveGauche',
- digue = 'garonne_2_digue',
+dicoGroupeRegion= dict(litMineur = 'garonne_1_litMineur',
+ riveDroite = 'garonne_1_riveDroite',
+ riveGauche = 'garonne_1_riveGauche',
+ digue = 'garonne_1_digue',
)
# --- value to use for Z when the node is not in a region (used to detect problems)
zUndef = 90
# --- Z interpolation on the bathymety/altimetry on the mesh nodes
statz = interpolZ(nomCas, fichierMaillage, dicoGroupeRegion, zUndef)
-refstatz = {'riveDroite': (10.88, 32.47999954), 'riveGauche': (7.72, 71.38999939), 'litMineur': (2.06, 25.41), 'digue': (14.10,27.09)}
+#print statz
+refstatz = {'riveDroite': (10.88, 32.61, 24.09, 5.13, 17.57, 31.33, 0.2),
+ 'riveGauche': (7.72, 72.40, 21.59, 8.37, 16.71, 35.71, 0.2),
+ 'litMineur': (2.06, 25.41, 13.93, 4.33, 8.47, 21.78),
+ 'digue': (14.10, 27.09, 22.01, 2.56, 18.15, 25.02)}
controlStatZ(statz, refstatz)
# --- add a field on nodes of type double with z values, named "BOTTOM"
-createZfield2(fichierMaillage)
+#createZfield2(fichierMaillage)
