-# Copyright (C) 2004-2008 CEA/DEN, EDF R&D
+# Copyright (C) 2004-2013 CEA/DEN, EDF R&D
#
-# This library is free software; you can redistribute it and/or
-# modify it under the terms of the GNU Lesser General Public
-# License as published by the Free Software Foundation; either
-# version 2.1 of the License.
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License.
#
-# This library is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# Lesser General Public License for more details.
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# Lesser General Public License for more details.
#
-# You should have received a copy of the GNU Lesser General Public
-# License along with this library; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
#
-# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
+# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
#
+
# PLEASE DO NOT MODIFY configure.in FILE
# ALL CHANGES WILL BE DISCARDED BY THE NEXT
# build_configure COMMAND
# Modified by : Marc Tajchman (CEA)
# Created from configure.in.base
#
-AC_INIT([Salome2 Project GHS3DPLUGIN module],[5.1.0], [webmaster.salome@opencascade.com], [SalomeGHS3DPLUGIN])
-AC_CONFIG_AUX_DIR(salome_adm/unix/config_files)
+AC_INIT([Salome2 Project GHS3DPLUGIN module],[7.1.0], [webmaster.salome@opencascade.com], [SalomeGHS3DPLUGIN])
+AC_CONFIG_AUX_DIR(adm_local/unix/config_files)
AC_CANONICAL_HOST
AC_CANONICAL_TARGET
-AM_INIT_AUTOMAKE
+AM_INIT_AUTOMAKE([-Wno-portability])
XVERSION=`echo $VERSION | awk -F. '{printf("0x%02x%02x%02x",$1,$2,$3)}'`
AC_SUBST(XVERSION)
+VERSION_DEV=1
+AC_SUBST(VERSION_DEV)
# set up MODULE_NAME variable for dynamic construction of directories (resources, etc.)
MODULE_NAME=ghs3dplugin
AC_PROG_MAKE_SET
AC_PROG_INSTALL
+AC_LOCAL_INSTALL
dnl
dnl libtool macro check for CC, LD, NM, LN_S, RANLIB, STRIP + pour les librairies dynamiques !
dnl full-path to the binary instead.
case "$INSTALL" in
*install-sh*)
- INSTALL="${KERNEL_ROOT_DIR}/salome_adm/unix/config_files/install-sh -c"
+ INSTALL="${KERNEL_ROOT_DIR}/adm_local/unix/config_files/install-sh -c"
;;
esac
dnl ---------------------------------------------
dnl
-CHECK_MPICH
+dnl CHECK_MPICH
+
+echo
+echo ---------------------------------------------
+echo testing MPI
+echo ---------------------------------------------
+echo
+
+CHECK_MPI
echo
echo ---------------------------------------------
corba=make_$ORB
CORBA=adm_local/unix/$corba
-GHS3DPLUGIN_WITH_GUI=yes
+echo
+echo ---------------------------------------------
+echo Testing GUI
+echo ---------------------------------------------
+echo
+
+CHECK_GUI_MODULE
+
+gui_ok=no
+if test "${SalomeGUI_need}" != "no" -a "${FullGUI_ok}" = "yes" ; then
+ gui_ok=yes
+fi
-AM_CONDITIONAL(GHS3DPLUGIN_ENABLE_GUI, [test "${GHS3DPLUGIN_WITH_GUI}" = "yes"])
+AM_CONDITIONAL(GHS3DPLUGIN_ENABLE_GUI, [test "${gui_ok}" = "yes"])
+
+if test "${SalomeGUI_need}" == "yes"; then
+ if test "${FullGUI_ok}" != "yes"; then
+ AC_MSG_WARN(For configure GHS3DPLUGIN module necessary full GUI!)
+ fi
+elif test "${SalomeGUI_need}" == "auto"; then
+ if test "${FullGUI_ok}" != "yes"; then
+ AC_MSG_WARN(Full GUI not found. Build will be done without GUI!)
+ fi
+elif test "${SalomeGUI_need}" == "no"; then
+ echo Build without GUI option has been chosen
+fi
-if test "${GHS3DPLUGIN_WITH_GUI}" = "yes"; then
+if test "${gui_ok}" = "yes"; then
echo
echo ---------------------------------------------
echo
CHECK_QT
+fi
- echo
- echo ---------------------------------------------
- echo testing VTK
- echo ---------------------------------------------
- echo
-
- CHECK_VTK
-
- echo
- echo ---------------------------------------------
- echo Testing GUI
- echo ---------------------------------------------
- echo
-
- CHECK_SALOME_GUI
-
- echo
- echo ---------------------------------------------
- echo Testing full GUI
- echo ---------------------------------------------
- echo
+echo
+echo ---------------------------------------------
+echo testing VTK
+echo ---------------------------------------------
+echo
- CHECK_CORBA_IN_GUI
- if test "x${CORBA_IN_GUI}" != "xyes"; then
- echo "failed : For configure GHS3DPLUGIN module necessary full GUI !"
- exit
- fi
-fi
+CHECK_VTK
echo
echo ---------------------------------------------
echo
echo ---------------------------------------------
-echo Testing GHS3D
+echo Testing MeshGems-Tetra
echo ---------------------------------------------
echo
-CHECK_GHS3D
+CHECK_MESHGEMS_TETRA
echo
echo ---------------------------------------------
echo
echo Configure
-if test "${GHS3DPLUGIN_WITH_GUI}" = "yes"; then
-variables="cc_ok boost_ok threads_ok omniORB_ok occ_ok doxygen_ok Kernel_ok Geom_ok Med_ok SMesh_ok GHS3D_ok OpenGL_ok qt_ok vtk_ok"
-fi
-if test "${GHS3DPLUGIN_WITH_GUI}" = "no"; then
-variables="cc_ok boost_ok threads_ok omniORB_ok occ_ok doxygen_ok Kernel_ok Geom_ok Med_ok SMesh_ok GHS3D_ok"
+if test "${gui_ok}" = "yes"; then
+ variables="cc_ok boost_ok threads_ok omniORB_ok occ_ok doxygen_ok Kernel_ok gui_ok Geom_ok Med_ok SMesh_ok MeshGems_Tetra_ok OpenGL_ok qt_ok vtk_ok"
+elif test "${SalomeGUI_need}" != "no"; then
+ variables="cc_ok boost_ok threads_ok omniORB_ok occ_ok doxygen_ok Kernel_ok gui_ok Geom_ok Med_ok SMesh_ok MeshGems_Tetra_ok vtk_ok"
+else
+ variables="cc_ok boost_ok threads_ok omniORB_ok occ_ok doxygen_ok Kernel_ok Geom_ok Med_ok SMesh_ok MeshGems_Tetra_ok vtk_ok"
fi
+
for var in $variables
do
printf " %10s : " `echo \$var | sed -e "s,_ok,,"`
else
AC_SUBST(SETX) SETX="set -x"
fi
+
+dnl Build with SMESH cancel compute feature
+AC_DEFINE(WITH_SMESH_CANCEL_COMPUTE)
+
echo
echo ---------------------------------------------
echo generating Makefiles and configure files
chmod +x ./bin/*; \
])
+AC_HACK_LIBTOOL
+AC_CONFIG_COMMANDS([hack_libtool],[
+sed -i "s%^CC=\"\(.*\)\"%hack_libtool (){ \n\
+ $(pwd)/hack_libtool \1 \"\$[@]\" \n\
+}\n\
+CC=\"hack_libtool\"%g" libtool
+sed -i "s%\(\s*\)for searchdir in \$newlib_search_path \$lib_search_path \$sys_lib_search_path \$shlib_search_path; do%\1searchdirs=\"\$newlib_search_path \$lib_search_path \$sys_lib_search_path \$shlib_search_path\"\n\1for searchdir in \$searchdirs; do%g" libtool
+sed -i "s%\(\s*\)searchdirs=\"\$newlib_search_path \$lib_search_path \(.*\)\"%\1searchdirs=\"\$newlib_search_path \$lib_search_path\"\n\1sss_beg=\"\"\n\1sss_end=\"\2\"%g" libtool
+sed -i "s%\(\s*\)\(for searchdir in \$searchdirs; do\)%\1for sss in \$searchdirs; do\n\1 if ! test -d \$sss; then continue; fi\n\1 ssss=\$(cd \$sss; pwd)\n\1 if test \"\$ssss\" != \"\" \&\& test -d \$ssss; then\n\1 case \$ssss in\n\1 /usr/lib | /usr/lib64 ) ;;\n\1 * ) sss_beg=\"\$sss_beg \$ssss\" ;;\n\1 esac\n\1 fi\n\1done\n\1searchdirs=\"\$sss_beg \$sss_end\"\n\1\2%g" libtool
+],[])
+
# This list is initiated using autoscan and must be updated manually
# when adding a new file <filename>.in to manage. When you execute
# autoscan, the Makefile list is generated in the output file configure.scan.
# This could be helpfull to update de configuration.
AC_OUTPUT([ \
- ./salome_adm/unix/SALOMEconfig.h \
- ./adm_local/Makefile \
- ./adm_local/unix/Makefile \
- ./adm_local/unix/config_files/Makefile \
- ./bin/VERSION \
- ./bin/Makefile \
- ./GHS3DPLUGIN_version.h \
- ./src/Makefile \
- ./src/GUI/Makefile \
- ./resources/Makefile \
- ./idl/Makefile \
+ adm_local/Makefile \
+ adm_local/unix/Makefile \
+ adm_local/unix/config_files/Makefile \
+ bin/VERSION \
+ bin/Makefile \
+ GHS3DPLUGIN_version.h \
+ doc/Makefile \
+ doc/salome/Makefile \
+ doc/salome/gui/Makefile \
+ doc/salome/gui/GHS3DPLUGIN/Makefile \
+ doc/salome/gui/GHS3DPLUGIN/doxyfile \
+ doc/salome/gui/GHS3DPLUGIN/doxyfile_py \
+ doc/salome/gui/GHS3DPLUGIN/static/header.html \
+ doc/salome/gui/GHS3DPLUGIN/static/header_py.html \
+ src/Makefile \
+ src/GUI/Makefile \
+ src/GHS3DPlugin/Makefile \
+ resources/Makefile \
+ idl/Makefile \
Makefile \
])
