-#! /bin/csh -f
-##################################################################################################
-# Name : build.csh
-# Description: Build and install SALOME modules from sources
-# Author : Vadim SANDLER (VSR), Open CASCADE S.A.
-# Created : 27.01.2005
-##################################################################################################
+#!/bin/csh -f
+
+####################################################################################
+# File : build.csh
+# Created : Thu Jan 27 09:50:55 2005
+# Author : Vadim SANDLER, Open CASCADE SAS (vadim.sandler@opencascade.com)
+# Project : SALOME
+# Module : Installation Wizard
+# Copyright : 2002-2008 CEA
+#
+# This script is the part of the SALOME installation procedure.
+#
+# This script can be used to build and install SALOME modules from sources.
+# Try build.csh -h for more details about usage.
+#
+####################################################################################
set is_build_configure=0
set is_configure=0
+set inst_with_gui=1
set is_delete=0
set verbose_level=2
set params=""
-set b_params=""
-set modules=(KERNEL GUI GEOM MED SMESH VISU SUPERV NETGENPLUGIN GHS3DPLUGIN COMPONENT PYCALCULATOR CALCULATOR HELLO PYHELLO LIGHT)
+set modules=(KERNEL GUI GEOM MED SMESH VISU YACS NETGENPLUGIN GHS3DPLUGIN BLSURFPLUGIN HexoticPLUGIN GHS3DPRLPLUGIN COMPONENT PYCALCULATOR CALCULATOR HELLO PYHELLO LIGHT PYLIGHT SIERPINSKY RANDOMIZER MULTIPR)
set optim=""
-set is_install=0
+set is_install=1
set is_help=0
+set is_tui=0
set prefix=""
+set def_install_dir="/INSTALL"
+set b_params=""
#########################################################
# parse parameters
set is_configure=1
else if ( "$1" == "-c" ) then
set is_configure=1
+ else if ( "$1" == "-w" ) then
+ set inst_with_gui=0
else if ( "$1" == "-d" ) then
set is_delete=1
else if ( "$1" == "-o" ) then
set optim="--enable-production=yes --disable-debug"
- else if ( "$1" == "-i" ) then
- set is_install=1
else if ( "$1" == "-v" ) then
shift
set verbose_level=$1
set prefix=$1
else if ( "$1" == "-h" ) then
set is_help=1
+ else if ( "$1" == "-t" ) then
+ set is_tui=1
else
- set ckt=`echo ${modules} | grep $1`
+ set ckt=`echo ${modules} | grep -E "\<$1\>"`
if ( "$ckt" != "" ) then
set params="$params $1"
else
set b_params="$b_params $1"
- echo "Warning: Unknown module: $1. Skipping."
+ echo "\!\!\! Warning \!\!\! Unknown module: $1."
endif
endif
shift
echo ""
echo ""
echo "Description:"
-echo " Builds given SALOME2 modules by performing make and (optionally) make install commands"
+echo " Builds given SALOME modules by performing make and make install commands"
echo ""
echo "Usage:"
echo " build.csh [ <option> ] ... [ <module> [ <module> ... ] ]"
echo ""
echo "<module> Modules to build, separated by space(s)."
-echo " If no modules are given - all SALOME2 modules are assumed."
+echo " If no modules are given - all SALOME modules are assumed."
echo " Note, that modules given in command lines are automatically sorted in such order"
echo " to support correct modules dependencies."
echo ""
echo ""
echo "-c Perform configure command for all given modules. Default is off."
echo ""
-echo "-d Delete build directories before calling configure, to enforce full rebuild"
-echo " (and reinstall if -i or -p option is used) of module."
+echo "-w Add --without-gui key to build_configure and configure commands"
+echo " to build SALOME module sources without GUI."
+echo " By default sources are built with GUI."
+echo ""
+echo "-d Delete build directories before calling configure, to force full rebuild"
+echo " and reinstall of the module."
echo " Use this option carefully."
echo ""
echo "-o Build sources in optimized mode. Default is off that means debug mode."
echo " This option can require -d option to be set (to ensure that previously"
echo " created build directories are removed to enforce rebuild in optimized mode)."
echo ""
-echo "-i Performs make install step. Default is off that means only make step."
+echo "-t Performs make dev_docs step to build TUI documentation for those modules"
+echo " which support this. Default is off."
echo ""
echo "-p <prefix> Define the directory where to install modules after compilation."
echo " By default the directory where compilation is performed is used."
echo "Note: If no keys are given script just performs make step."
echo ""
echo "Example:"
-echo " ./build.csh -o -i -b KERNEL MED GEOM"
+echo " ./build.csh -o -p /home/user/salome -b KERNEL MED GEOM"
echo ""
echo " This will make KERNEL, GEOM and MED modules: build_configure, configure, make"
echo " and install procedures will be performed for all specified modules."
if ( "${params}" != "" ) then
set xparams=""
foreach module (${modules})
- set ckt=`echo ${params} | grep ${module}`
+ set ckt=`echo ${params} | grep -E "\<${module}\>"`
if ( "$ckt" != "" ) then
set xparams="$xparams $module"
endif
end
- set modules=($xparams)
-else
- if ( "${b_params}" != "" ) then
- echo "Nothing to be built. Exiting."
- exit
- endif
+ set modules=($xparams $b_params)
+else if ( "${b_params}" != "" ) then
+ set modules=($b_params)
endif
-echo "The following SALOME packages will be built:"
+echo ">>> The following modules will be built:"
echo $modules
#########################################################
if ( ! -e $env_script ) then
set env_script=`dirname $0`/env_products.csh
endif
+if ( ! -e $env_script ) then
+ set env_script=`dirname $0`/env.sh
+endif
if ( -e $env_script ) then
- echo "Setting environment"
+ echo ">>> Setting environment"
source $env_script
else
- echo "Warning! Environment is not set: file env_products.csh is not found."
+ echo "\!\!\! Warning \!\!\! Environment is not set."
+ echo "No environment file (env_build.sh, env_products.sh, env.sh) is found."
+ echo "Proceed with the current environment."
endif
set BUILD_DIR=${PWD}
set LOG_DIR=${BUILD_DIR}/LOGS
+#########################################################
+# define installation prefix
+#########################################################
+if ( "$prefix" == "" ) then
+ echo "\!\!\! Warning \!\!\! Installation directory is not set."
+ echo "All the modules will be installed to the ${BUILD_DIR}${def_install_dir}"
+else
+ set is_absolute=`echo $prefix | grep -e "^/"`
+ if ( "$is_absolute" == "" ) then
+ set prefix=${BUILD_DIR}/$prefix
+ echo "\!\!\! Warning \!\!\! Relative prefix is used."
+ echo "All the modules will be installed to the $prefix"
+ endif
+endif
+
#########################################################
# create log directory
#########################################################
echo "==========================================================================="
echo "Starting SALOME build at `date`"
+echo "==========================================================================="
#########################################################
# loop for all given modules
#########################################################
foreach module (${modules})
- echo "==========================================================================="
- echo "Processing ${module} module"
+ echo ">>> Processing ${module} module"
set module_src=`printenv ${module}_SRC_DIR`
set module_build=${BUILD_DIR}/${module}_BUILD
if ( ${module_src} != "" ) then
- set add_keys=""
cd ${BUILD_DIR}
#########################################################
# check if sources directory exists
#########################################################
if ( ! -e ${module_src} ) then
- echo "Error! Can't find sources directory: ${module_src} does not exist."
+ echo "\!\!\! Error \!\!\! Can't find sources directory: ${module_src} does not exist."
continue
endif
#########################################################
# configure script does not exist (first compilation?)
#########################################################
if ( $is_build_configure == 1 || $cfg_exist == 0 ) then
- echo "------- Build configure ---------"
+ echo "... Performing build_configure"
#########################################################
# check if build_configure script exists
#########################################################
if ( ! -e ${module_src}/build_configure ) then
- echo "Warning! Can not find build_configure script in ${module_src}."
+ echo "\!\!\! Warning \!\!\! Can not find build_configure script in ${module_src}."
else
#########################################################
# call build_configure
#########################################################
+ set mybuildconf_keys="${BUILDCONF_OPTS}"
+ if ( $inst_with_gui == 0 ) then
+ set mybuildconf_keys="${mybuildconf_keys} --without-gui"
+ endif
cd ${module_src}
- ./build_configure >& ${LOG_DIR}/build_configure_${module}.log
+ ./build_configure ${mybuildconf_keys} >& ${LOG_DIR}/build_configure_${module}.log
#########################################################
# echo possible errors
#########################################################
if ( $verbose_level > 0 ) then
- cat ${LOG_DIR}/build_configure_${module}.log | grep ": error:"
+ cat ${LOG_DIR}/build_configure_${module}.log | grep -E "(failed|: error:)" >/dev/stderr
endif
endif
endif
# deleting build directory if -d flag is given
#########################################################
if ( -e ${module_build} && $is_delete == 1 ) then
- echo "Deleting ${module_build}"
- rm -rf ${module_build}
+ echo "... Removing ${module_build}"
+ chmod -R +w ${module_build} && rm -rf ${module_build} >& /dev/null
+ if ( "$?" != "0" ) then
+ echo "\!\!\! Warning \!\!\! Cannot remove build directory ${module_build}. Permission denied."
+ endif
endif
#########################################################
# creating build directory if it does not exist
#########################################################
if ( ! -e ${module_build} ) then
- mkdir -p ${module_build}
+ mkdir -p ${module_build} >& /dev/null
+ if ( "$?" != "0" ) then
+ echo "\!\!\! Error \!\!\! Cannot create build directory ${module_build}. Permission denied."
+ continue
+ endif
endif
cd ${module_build}
#########################################################
if ( -e ${module_build}/Makefile ) then
set mkfile_exist=1
endif
+ #########################################################
+ # check if configure options are changed from the
+ # previous launch
+ #########################################################
+ set opts_changed=0
+## if ( -f ${module_build}/config.log ) then
+## set old_prefix=`grep -e '^prefix=' ${module_build}/config.log | sed -e "s%^prefix='\(.*\)'%\1%"`
+## if ( "$old_prefix" != "$prefix" ) then
+## set opts_changed=1
+## endif
+## endif
#########################################################
# define installation directory (by using module's version
# number); default is a build directory
#########################################################
set vx=""
- if ( -e ${module_src}/bin/VERSION ) then
- set vx=`awk -F: '{ if (NF > 1) print $NF; }' ${module_src}/bin/VERSION | tr -d '[:space:]'`
- endif
- set px=${BUILD_DIR}/${module}
- if ( "$prefix" != "" ) then
- set px=$prefix/${module}
+ if ( -e ${module_src}/configure.ac ) then
+ set vx=`grep -e "^AC_INIT" ${module_src}/configure.ac | sed -e "s%.*\[\([[:digit:].]*\)\].*%\1%g"`
+ else if ( -e ${module_src}/configure.in.base ) then
+ set vx=`grep -e "^VERSION=" ${module_src}/configure.in.base | awk -F= '{ if (NF>1) print $NF; }' | tr -d '[:space:]'`
+ if ( "$vx" == "" ) then
+ set vx=`grep -e "^AC_INIT" ${module_src}/configure.in.base | sed -e "s%.*\[\([[:digit:].]*\)\].*%\1%g"`
+ endif
endif
if ( "$vx" != "" ) then
- set px="$px"_"$vx"
+ set vx="_$vx"
+ endif
+ if ( "$prefix" == "" ) then
+ #set module_root_dir=`printenv ${module}_ROOT_DIR`
+ #if ( "$module_root_dir" != "" ) then
+ # set px=$module_root_dir
+ #else
+ set px=${BUILD_DIR}${def_install_dir}/${module}${vx}
+ #endif
+ else
+ set px=${prefix}/${module}${vx}
endif
#########################################################
# perform configure if -c flag is given or if
# Makefile does not exist (first compilation?)
#########################################################
- if ( $is_configure == 1 || $mkfile_exist == 0) then
- echo "------- Configure ---------------"
+ if ( $is_configure == 1 || $mkfile_exist == 0 || $opts_changed == 1 ) then
+ echo "... Performing configure"
#########################################################
# check if configure script exists
#########################################################
if ( ! -e ${module_src}/configure ) then
- echo "Warning! Can not find configure script in ${module_src}."
+ echo "\!\!\! Warning \!\!\! Can not find configure script in ${module_src}."
else
- if ( "${module}" == "NETGENPLUGIN" && ($?NETGENHOME) ) then
- set add_keys="--with-netgen=${NETGENHOME}"
+ set myconf_keys="${CONF_OPTS}"
+ if ( $inst_with_gui == 0 ) then
+ set myconf_keys="${myconf_keys} --without-gui"
+ endif
+ if ( "${module}" == "MED" && ($?METISDIR) && ($?SCOTCHDIR) ) then
+ set myconf_keys="${myconf_keys} --enable-splitter=yes --with-metis=${METISDIR} --with-scotch=${SCOTCHDIR}"
endif
- ${module_src}/configure --prefix=$px ${optim} ${add_keys} >& ${LOG_DIR}/configure_${module}.log
+ if ( "${module}" == "NETGENPLUGIN" && ($?NETGENHOME) ) then
+ set myconf_keys="${myconf_keys} --with-netgen=${NETGENHOME}"
+ endif
+ ${module_src}/configure --prefix=$px ${optim} ${myconf_keys} >& ${LOG_DIR}/configure_${module}.log
#########################################################
# echo possible errors
#########################################################
if ( $verbose_level > 0 ) then
- cat ${LOG_DIR}/configure_${module}.log | grep ": error:"
+ cat ${LOG_DIR}/configure_${module}.log | grep ": error:" >/dev/stderr
endif
if ( $verbose_level > 1 ) then
- cat ${LOG_DIR}/configure_${module}.log | grep ": WARNING:"
+ cat ${LOG_DIR}/configure_${module}.log | grep ": WARNING:" >/dev/stderr
endif
endif
endif
#########################################################
# perform make
#########################################################
- echo "------- Make --------------------"
+ echo "... Performing make"
#########################################################
# first clear dependencies
#########################################################
# if make step is successful set the ${module}_ROOT_DIR
# environment variable
#########################################################
- if ( $sts == 0 ) then
- setenv ${module}_ROOT_DIR ${module_build}
- endif
+ #if ( $sts == 0 ) then
+ # setenv ${module}_ROOT_DIR ${module_build}
+ #endif
#########################################################
# print make errors
#########################################################
- cat ${LOG_DIR}/make_${module}.log | grep '[*][*][*]'
+ cat ${LOG_DIR}/make_${module}.log | grep -Ei '[*][*][*].*error' >/dev/stderr
#########################################################
# print compiler errors and warnings
# Note: here awk is used to concatenate together several lines of single
#########################################################
if ( $verbose_level > 0 ) then
###cat ${LOG_DIR}/make_${module}.log | grep ": error"
- cat ${LOG_DIR}/make_${module}.log | awk 'substr($0,0,1)!=" " {print ""} {printf $0} END {print ""}' | grep "${module_src}/[A-Za-z_0-9./]*:" | sed s@"^${module_src}/src/"@@
+ cat ${LOG_DIR}/make_${module}.log | awk 'substr($0,0,1)!=" " {print ""} {print $0} END {print ""}' | grep "${module_src}/[A-Za-z_0-9./]*:" | sed s@"^${module_src}/src/"@@ >/dev/stderr
endif
if ( $verbose_level > 1 ) then
- cat ${LOG_DIR}/make_${module}.log | awk 'substr($0,0,1)!=" " {print ""} {printf $0} END {print ""}' | grep ": warning" | sed s@"^${module_src}/src/"@@
+ cat ${LOG_DIR}/make_${module}.log | awk 'substr($0,0,1)!=" " {print ""} {print $0} END {print ""}' | grep -E ": warning|* Warning" | sed s@"^${module_src}/src/"@@ >/dev/stderr
+ endif
+ #########################################################
+ # perform make dev_docs step if -t flag is given
+ #########################################################
+ if ( $is_tui == 1 && $sts == 0 && -d ${module_build}/doc ) then
+ cd ${module_build}/doc
+ set dd=`cat Makefile | grep -E "dev_docs[[:space:]]*:"`
+ if ( "$dd" != "" ) then
+ echo "... Performing make dev_docs"
+ make dev_docs >& ${LOG_DIR}/make_dev_docs_${module}.log
+ cat ${LOG_DIR}/make_dev_docs_${module}.log | grep '[*][*][*]' >/dev/stderr
+ endif
endif
+ cd ${module_build}
#########################################################
# perform make if -i or -p flags are given
#########################################################
- if ( $is_install == 1 && $sts == 0 ) then
- echo "------- Make install ------------"
+ if ( $is_install == 1 && $sts == 0 || "${module}" == "KERNEL" ) then
#########################################################
# deleting build directory if -d flag is given
#########################################################
if ( -e $px && $is_delete == 1 ) then
- echo "Deleting $px"
- rm -rf $px
+ echo "... Removing $px"
+ rm -rf $px >& /dev/null
+ if ( "$?" != "0" ) then
+ echo "\!\!\! Warning \!\!\! Cannot remove install directory ${px}. Permission denied."
+ endif
endif
+ echo "... Performing make install"
make install >& ${LOG_DIR}/make_install_${module}.log
set sts=$status
#########################################################
setenv ${module}_ROOT_DIR $px
endif
endif
- echo ""
+ echo ">>> Finished ${module} module"
else
- echo "Error! Can't find module sources. ${module}_SRC_DIR environment variable is not set."
+ echo "\!\!\! Error \!\!\! Can't find module sources. ${module}_SRC_DIR environment variable is not set."
endif
end
#########################################################