# Author : Vadim SANDLER, Open CASCADE SAS (vadim.sandler@opencascade.com)
# Project : SALOME
# Module : Installation Wizard
-# Copyright : 2002-2006 CEA
+# Copyright : 2002-2008 CEA
#
# This script is the part of the SALOME installation procedure.
#
set is_build_configure=0
set is_configure=0
+set inst_with_gui=1
set is_delete=0
set verbose_level=2
set params=""
-set b_params=""
-set modules=(KERNEL GUI GEOM MED SMESH VISU SUPERV NETGENPLUGIN GHS3DPLUGIN COMPONENT PYCALCULATOR CALCULATOR HELLO PYHELLO LIGHT)
+set modules=(KERNEL GUI GEOM MED SMESH VISU PARAVIS YACS NETGENPLUGIN GHS3DPLUGIN BLSURFPLUGIN HexoticPLUGIN GHS3DPRLPLUGIN COMPONENT PYCALCULATOR CALCULATOR HELLO PYHELLO LIGHT PYLIGHT SIERPINSKY RANDOMIZER HEXABLOCK HEXABLOCKPLUGIN ATOMIC ATOMGEN ATOMSOLV HOMARD JOBMANAGER)
set optim=""
-set is_install=0
+set is_install=1
set is_help=0
set is_tui=0
set prefix=""
+set def_install_dir="/INSTALL"
+set b_params=""
#########################################################
# parse parameters
set is_configure=1
else if ( "$1" == "-c" ) then
set is_configure=1
+ else if ( "$1" == "-w" ) then
+ set inst_with_gui=0
else if ( "$1" == "-d" ) then
set is_delete=1
else if ( "$1" == "-o" ) then
set optim="--enable-production=yes --disable-debug"
- else if ( "$1" == "-i" ) then
- set is_install=1
else if ( "$1" == "-v" ) then
shift
set verbose_level=$1
else if ( "$1" == "-t" ) then
set is_tui=1
else
- set ckt=`echo ${modules} | grep $1`
+ set ckt=`echo ${modules} | grep -E "\<$1\>"`
if ( "$ckt" != "" ) then
set params="$params $1"
else
set b_params="$b_params $1"
- echo "\!\!\! Warning \!\!\! Unknown module: $1. Skipping."
+ echo "\!\!\! Warning \!\!\! Unknown module: $1."
endif
endif
shift
echo ""
echo ""
echo "Description:"
-echo " Builds given SALOME modules by performing make and (optionally) make install commands"
+echo " Builds given SALOME modules by performing make and make install commands"
echo ""
echo "Usage:"
echo " build.csh [ <option> ] ... [ <module> [ <module> ... ] ]"
echo ""
echo "-c Perform configure command for all given modules. Default is off."
echo ""
-echo "-d Delete build directories before calling configure, to enforce full rebuild"
-echo " (and reinstall if -i or -p option is used) of module."
+echo "-w Add --without-gui key to build_configure and configure commands"
+echo " to build SALOME module sources without GUI."
+echo " By default sources are built with GUI."
+echo ""
+echo "-d Delete build directories before calling configure, to force full rebuild"
+echo " and reinstall of the module."
echo " Use this option carefully."
echo ""
echo "-o Build sources in optimized mode. Default is off that means debug mode."
echo "-t Performs make dev_docs step to build TUI documentation for those modules"
echo " which support this. Default is off."
echo ""
-echo "-i Performs make install step. Default is off that means only make step."
-echo ""
echo "-p <prefix> Define the directory where to install modules after compilation."
echo " By default the directory where compilation is performed is used."
echo ""
echo "Note: If no keys are given script just performs make step."
echo ""
echo "Example:"
-echo " ./build.csh -o -i -b KERNEL MED GEOM"
+echo " ./build.csh -o -p /home/user/salome -b KERNEL MED GEOM"
echo ""
echo " This will make KERNEL, GEOM and MED modules: build_configure, configure, make"
echo " and install procedures will be performed for all specified modules."
if ( "${params}" != "" ) then
set xparams=""
foreach module (${modules})
- set ckt=`echo ${params} | grep ${module}`
+ set ckt=`echo ${params} | grep -E "\<${module}\>"`
if ( "$ckt" != "" ) then
set xparams="$xparams $module"
endif
end
- set modules=($xparams)
-else
- if ( "${b_params}" != "" ) then
- echo "Nothing to be built. Exiting."
- exit
- endif
+ set modules=($xparams $b_params)
+else if ( "${b_params}" != "" ) then
+ set modules=($b_params)
endif
-echo ">>> The following SALOME packages will be built:"
+echo ">>> The following modules will be built:"
echo $modules
#########################################################
if ( ! -e $env_script ) then
set env_script=`dirname $0`/env_products.csh
endif
+if ( ! -e $env_script ) then
+ set env_script=`dirname $0`/env.sh
+endif
if ( -e $env_script ) then
echo ">>> Setting environment"
source $env_script
else
- echo "\!\!\! Warning \!\!\! Environment is not set: file env_products.csh is not found."
+ echo "\!\!\! Warning \!\!\! Environment is not set."
+ echo "No environment file (env_build.sh, env_products.sh, env.sh) is found."
+ echo "Proceed with the current environment."
endif
set BUILD_DIR=${PWD}
# define installation prefix
#########################################################
if ( "$prefix" == "" ) then
- set prefix=${BUILD_DIR}/INSTALL
- if ( $is_install == 1 ) then
- echo "\!\!\! Warning \!\!\! Installation directory is not set."
- echo "All the modules will be installed to the $prefix"
- else
- set is_kernel=`echo ${modules} | grep KERNEL`
- if ( "$is_kernel" != "" ) then
- echo "\!\!\! Warning \!\!\! KERNEL module requires install step to be performed."
- echo "For this module -i option will be forced."
- echo "The module(s) will be installed to the $prefix"
- endif
- endif
+ echo "\!\!\! Warning \!\!\! Installation directory is not set."
+ echo "All the modules will be installed to the ${BUILD_DIR}${def_install_dir}"
else
set is_absolute=`echo $prefix | grep -e "^/"`
if ( "$is_absolute" == "" ) then
set module_build=${BUILD_DIR}/${module}_BUILD
if ( ${module_src} != "" ) then
- set add_keys=""
cd ${BUILD_DIR}
#########################################################
# check if sources directory exists
#########################################################
# check if build_configure script exists
#########################################################
- if ( ! -e ${module_src}/build_configure ) then
+ if ( ! -e ${module_src}/build_configure && "${module}" != "PARAVIS" ) then
echo "\!\!\! Warning \!\!\! Can not find build_configure script in ${module_src}."
- else
+ else
+ if ( "${module}" == "PARAVIS" ) then
+ echo "\!\!\! Warning \!\!\! build_configure step is not executed for ${module}."
+ else
#########################################################
# call build_configure
#########################################################
+ if (! ($?BUILDCONF_OPTS) ) then
+ set mybuildconf_keys=""
+ else
+ set mybuildconf_keys="${BUILDCONF_OPTS}"
+ endif
+ if ( $inst_with_gui == 0 ) then
+ set mybuildconf_keys="${mybuildconf_keys} --without-gui"
+ endif
cd ${module_src}
- ./build_configure >& ${LOG_DIR}/build_configure_${module}.log
+ ./build_configure ${mybuildconf_keys} >& ${LOG_DIR}/build_configure_${module}.log
#########################################################
# echo possible errors
#########################################################
if ( $verbose_level > 0 ) then
- cat ${LOG_DIR}/build_configure_${module}.log | grep -E "(failed|: error:)" > /dev/stderr
+ cat ${LOG_DIR}/build_configure_${module}.log | grep -E "(failed|: error:)" >/dev/stderr
endif
endif
+ endif
endif
#########################################################
# deleting build directory if -d flag is given
#########################################################
if ( -e ${module_build} && $is_delete == 1 ) then
echo "... Removing ${module_build}"
- rm -rf ${module_build}
+ chmod -R +w ${module_build} && rm -rf ${module_build} >& /dev/null
+ if ( "$?" != "0" ) then
+ echo "\!\!\! Warning \!\!\! Cannot remove build directory ${module_build}. Permission denied."
+ endif
endif
#########################################################
# creating build directory if it does not exist
#########################################################
if ( ! -e ${module_build} ) then
- mkdir -p ${module_build}
+ mkdir -p ${module_build} >& /dev/null
+ if ( "$?" != "0" ) then
+ echo "\!\!\! Error \!\!\! Cannot create build directory ${module_build}. Permission denied."
+ continue
+ endif
endif
cd ${module_build}
#########################################################
# number); default is a build directory
#########################################################
set vx=""
- set cfg_file=configure.ac
- if ( ! -e ${module_src}/${cfg_file} ) then
- set cfg_file=configure.in.base
- endif
- if ( -e ${module_src}/${cfg_file} ) then
- set vx=`grep -e "^VERSION=" ${module_src}/${cfg_file} | awk -F= '{ if (NF>1) print $NF; }' | tr -d '[:space:]'`
- endif
- set px=${BUILD_DIR}/${module}
- if ( "$prefix" != "" ) then
- set px=$prefix/${module}
+ if ( -e ${module_src}/configure.ac ) then
+ set vx=`grep -e "^AC_INIT" ${module_src}/configure.ac | sed -e "s%.*\[\([[:digit:].]*\)\].*%\1%g"`
+ else if ( -e ${module_src}/configure.in.base ) then
+ set vx=`grep -e "^VERSION=" ${module_src}/configure.in.base | awk -F= '{ if (NF>1) print $NF; }' | tr -d '[:space:]'`
+ if ( "$vx" == "" ) then
+ set vx=`grep -e "^AC_INIT" ${module_src}/configure.in.base | sed -e "s%.*\[\([[:digit:].]*\)\].*%\1%g"`
+ endif
+ else if ( -e ${module_src}/CMakeLists.txt ) then
+ set ver_maj=`cat ${module_src}/CMakeLists.txt | grep SET\(VERSION_MAJOR | sed -e "s%[A-Z_() ]%%g"`
+ set ver_min=`cat ${module_src}/CMakeLists.txt | grep SET\(VERSION_MINOR | sed -e "s%[A-Z_() ]%%g"`
+ set ver_maintenance=`cat ${module_src}/CMakeLists.txt | grep SET\(VERSION_MAINTENANCE | sed -e "s%[A-Z_() ]%%g"`
+ set vx="${ver_maj}.${ver_min}.${ver_maintenance}"
endif
if ( "$vx" != "" ) then
- set px="$px"_"$vx"
+ set vx="_$vx"
+ endif
+ if ( "$prefix" == "" ) then
+ #set module_root_dir=`printenv ${module}_ROOT_DIR`
+ #if ( "$module_root_dir" != "" ) then
+ # set px=$module_root_dir
+ #else
+ set px=${BUILD_DIR}${def_install_dir}/${module}${vx}
+ #endif
+ else
+ set px=${prefix}/${module}${vx}
endif
#########################################################
# perform configure if -c flag is given or if
#########################################################
# check if configure script exists
#########################################################
- if ( ! -e ${module_src}/configure ) then
+ if ( ! -e ${module_src}/configure && "${module}" != "PARAVIS" ) then
echo "\!\!\! Warning \!\!\! Can not find configure script in ${module_src}."
else
- if ( "${module}" == "NETGENPLUGIN" && ($?NETGENHOME) ) then
- set add_keys="--with-netgen=${NETGENHOME}"
+ if (! ($?BUILDCONF_OPTS) ) then
+ set myconf_keys=""
+ else
+ set myconf_keys="${CONF_OPTS}"
+ endif
+ if ( $inst_with_gui == 0 ) then
+ set myconf_keys="${myconf_keys} --without-gui"
+ endif
+ if ( "${module}" == "MED" && ($?METISDIR) && ($?SCOTCHDIR) ) then
+ set myconf_keys="${myconf_keys} --enable-splitter=yes --with-metis=${METISDIR} --with-scotch=${SCOTCHDIR}"
endif
- ${module_src}/configure --prefix=$px ${optim} ${add_keys} >& ${LOG_DIR}/configure_${module}.log
+ if ( "${module}" == "NETGENPLUGIN" && ($?NETGENHOME) ) then
+ set myconf_keys="${myconf_keys} --with-netgen=${NETGENHOME}"
+ endif
+ if ( "${module}" == "PARAVIS" ) then
+ cd ${module_build}; cmake ${module_src} -DCMAKE_INSTALL_PREFIX=$px >& ${LOG_DIR}/configure_${module}.log
+ else
+ ${module_src}/configure --prefix=$px ${optim} ${myconf_keys} >& ${LOG_DIR}/configure_${module}.log
+ endif
#########################################################
# echo possible errors
#########################################################
if ( $verbose_level > 0 ) then
- cat ${LOG_DIR}/configure_${module}.log | grep ": error:" > /dev/stderr
+ cat ${LOG_DIR}/configure_${module}.log | grep ": error:" >/dev/stderr
endif
if ( $verbose_level > 1 ) then
- cat ${LOG_DIR}/configure_${module}.log | grep ": WARNING:" > /dev/stderr
+ cat ${LOG_DIR}/configure_${module}.log | grep ": WARNING:" >/dev/stderr
endif
endif
endif
# if make step is successful set the ${module}_ROOT_DIR
# environment variable
#########################################################
- if ( $sts == 0 ) then
- setenv ${module}_ROOT_DIR ${module_build}
- endif
+ #if ( $sts == 0 ) then
+ # setenv ${module}_ROOT_DIR ${module_build}
+ #endif
#########################################################
# print make errors
#########################################################
- cat ${LOG_DIR}/make_${module}.log | grep '[*][*][*]' > /dev/stderr
+ cat ${LOG_DIR}/make_${module}.log | grep -Ei '[*][*][*].*error' >/dev/stderr
#########################################################
# print compiler errors and warnings
# Note: here awk is used to concatenate together several lines of single
#########################################################
if ( $verbose_level > 0 ) then
###cat ${LOG_DIR}/make_${module}.log | grep ": error"
- cat ${LOG_DIR}/make_${module}.log | awk 'substr($0,0,1)!=" " {print ""} {printf $0} END {print ""}' | grep "${module_src}/[A-Za-z_0-9./]*:" | sed s@"^${module_src}/src/"@@ > /dev/stderr
+ cat ${LOG_DIR}/make_${module}.log | awk 'substr($0,0,1)!=" " {print ""} {print $0} END {print ""}' | grep "${module_src}/[A-Za-z_0-9./]*:" | sed s@"^${module_src}/src/"@@ >/dev/stderr
endif
if ( $verbose_level > 1 ) then
- cat ${LOG_DIR}/make_${module}.log | awk 'substr($0,0,1)!=" " {print ""} {printf $0} END {print ""}' | grep ": warning" | sed s@"^${module_src}/src/"@@ > /dev/stderr
+ cat ${LOG_DIR}/make_${module}.log | awk 'substr($0,0,1)!=" " {print ""} {print $0} END {print ""}' | grep -E ": warning|* Warning" | sed s@"^${module_src}/src/"@@ >/dev/stderr
endif
#########################################################
# perform make dev_docs step if -t flag is given
if ( "$dd" != "" ) then
echo "... Performing make dev_docs"
make dev_docs >& ${LOG_DIR}/make_dev_docs_${module}.log
- cat ${LOG_DIR}/make_dev_docs_${module}.log | grep '[*][*][*]' > /dev/stderr
+ cat ${LOG_DIR}/make_dev_docs_${module}.log | grep '[*][*][*]' >/dev/stderr
endif
endif
cd ${module_build}
#########################################################
if ( -e $px && $is_delete == 1 ) then
echo "... Removing $px"
- rm -rf $px
+ rm -rf $px >& /dev/null
+ if ( "$?" != "0" ) then
+ echo "\!\!\! Warning \!\!\! Cannot remove install directory ${px}. Permission denied."
+ endif
endif
echo "... Performing make install"
make install >& ${LOG_DIR}/make_install_${module}.log
