# - Config file for the @PROJECT_NAME@ package
-# It defines the following variables.
-# Specific to the pacakge @PROJECT_NAME@ itself:
+# It defines the following variables.
+# Specific to the package @PROJECT_NAME@ itself:
# @PROJECT_NAME_UC@_ROOT_DIR_EXP - the root path of the installation providing this CMake file
#
# Other stuff specific to this package:
# SALOME_USE_MPI - ON if KERNEL is built with MPI support
# SALOME_KERNEL_BUILD_DOC - ON if documentation for KERNEL module has been built
# SALOME_KERNEL_BUILD_TESTS - ON if tests for KERNEL module has been built
-# SALOME_LIGHT_ONLY - ON if SALOME is built in Light mode (no CORBA)
+# SALOME_KERNEL_LIGHT_ONLY - ON if SALOME is built in Light mode (no CORBA)
###############################################################
-# Copyright (C) 2007-2015 CEA/DEN, EDF R&D, OPEN CASCADE
+# Copyright (C) 2007-2023 CEA, EDF, OPEN CASCADE
#
# Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
# CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
### Initialisation performed by CONFIGURE_PACKAGE_CONFIG_FILE:
@PACKAGE_INIT@
-# Load the dependencies for the libraries of @PROJECT_NAME@
-# (contains definitions for IMPORTED targets). This is only
+# Load the dependencies for the libraries of @PROJECT_NAME@
+# (contains definitions for IMPORTED targets). This is only
# imported if we are not built as a subproject (in this case targets are already there)
IF(NOT TARGET SALOMEBasics AND NOT @PROJECT_NAME@_BINARY_DIR)
INCLUDE("@PACKAGE_SALOME_INSTALL_CMAKE@/@PROJECT_NAME@Targets.cmake")
-ENDIF()
+ENDIF()
# Package root dir:
SET_AND_CHECK(KERNEL_ROOT_DIR_EXP "@PACKAGE_CMAKE_INSTALL_PREFIX@")
SET(SALOME_KERNEL_BUILD_TESTS @SALOME_BUILD_TESTS@)
SET(SALOME_KERNEL_LIGHT_ONLY @SALOME_LIGHT_ONLY@)
SET(SALOME_USE_LIBBATCH @SALOME_USE_LIBBATCH@)
+SET(SALOME_USE_64BIT_IDS @SALOME_USE_64BIT_IDS@)
-SET(SALOME_USE_SIMAN @SALOME_USE_SIMAN@)
-IF(SALOME_USE_SIMAN)
- LIST(APPEND KERNEL_DEFINITIONS "-DWITH_SIMANIO")
-ENDIF()
-
-SET(SALOME_USE_PORTMANAGER @SALOME_USE_PORTMANAGER@)
-IF(SALOME_USE_PORTMANAGER)
- LIST(APPEND KERNEL_DEFINITIONS "-DWITH_PORTMANAGER")
+IF(SALOME_KERNEL_LIGHT_ONLY)
+ ADD_DEFINITIONS(-DSALOME_LIGHT)
ENDIF()
# Prerequisites:
IF(SALOME_USE_MPI)
SET_AND_CHECK(MPI_ROOT_DIR_EXP "@PACKAGE_MPI_ROOT_DIR@")
ENDIF()
-IF(NOT SALOME_LIGHT_ONLY)
+IF(NOT SALOME_KERNEL_LIGHT_ONLY)
SET_AND_CHECK(OMNIORB_ROOT_DIR_EXP "@PACKAGE_OMNIORB_ROOT_DIR@")
SET_AND_CHECK(OMNIORBPY_ROOT_DIR_EXP "@PACKAGE_OMNIORBPY_ROOT_DIR@")
ENDIF()
IF(SALOME_USE_LIBBATCH)
SET_AND_CHECK(LIBBATCH_ROOT_DIR_EXP "@PACKAGE_LIBBATCH_ROOT_DIR@")
ENDIF()
-IF(SALOME_USE_SIMAN)
- SET_AND_CHECK(SIMANIO_ROOT_DIR_EXP "@PACKAGE_SIMANIO_ROOT_DIR@")
-ENDIF()
SET_AND_CHECK(PTHREAD_ROOT_DIR_EXP "@PACKAGE_PTHREAD_ROOT_DIR@")
SET_AND_CHECK(HDF5_ROOT_DIR_EXP "@PACKAGE_HDF5_ROOT_DIR@")
SET_AND_CHECK(PYTHON_ROOT_DIR_EXP "@PACKAGE_PYTHON_ROOT_DIR@")
SET_AND_CHECK(SWIG_ROOT_DIR_EXP "@PACKAGE_SWIG_ROOT_DIR@")
-# For all prerequisites, load the corresponding targets if the package was used
+# For all prerequisites, load the corresponding targets if the package was used
# in CONFIG mode. This ensures dependent projects link correctly
# without having to set LD_LIBRARY_PATH:
-SET(_PREREQ @_PREREQ_LIST@)
-SET(_PREREQ_CONFIG_DIR @_PREREQ_DIR_LIST@)
-SET(_PREREQ_COMPONENTS "@_PREREQ_COMPO_LIST@")
-LIST(LENGTH _PREREQ_CONFIG_DIR _list_len)
-IF(NOT _list_len EQUAL 0)
+unset(Boost_USE_DEBUG_RUNTIME) # problem detected in 9.9.0 with persalys. After a first find_package (Boost) FIND_PACKAGE 15 lines under failed
+SET(_PREREQ_@PROJECT_NAME@ @_PREREQ_LIST@)
+SET(_PREREQ_@PROJECT_NAME@_CONFIG_DIR @_PREREQ_DIR_LIST@)
+SET(_PREREQ_@PROJECT_NAME@_COMPONENTS "@_PREREQ_COMPO_LIST@")
+LIST(LENGTH _PREREQ_@PROJECT_NAME@_CONFIG_DIR _list_len_@PROJECT_NAME@)
+IF(NOT _list_len_@PROJECT_NAME@ EQUAL 0)
# Another CMake stupidity - FOREACH(... RANGE r) generates r+1 numbers ...
- MATH(EXPR _range "${_list_len}-1")
- FOREACH(_p RANGE ${_range})
- LIST(GET _PREREQ ${_p} _pkg )
- LIST(GET _PREREQ_CONFIG_DIR ${_p} _pkg_dir)
- LIST(GET _PREREQ_COMPONENTS ${_p} _pkg_compo)
- MESSAGE(STATUS "===> Reloading targets from ${_pkg} ...")
- IF(NOT _pkg_compo)
- FIND_PACKAGE(${_pkg} REQUIRED NO_MODULE
- PATHS "${_pkg_dir}"
- NO_DEFAULT_PATH)
- ELSE()
- STRING(REPLACE "," ";" _compo_lst "${_pkg_compo}")
- MESSAGE(STATUS "===> (components: ${_pkg_compo})")
- FIND_PACKAGE(${_pkg} REQUIRED NO_MODULE
- COMPONENTS ${_compo_lst}
- PATHS "${_pkg_dir}"
- NO_DEFAULT_PATH)
+ MATH(EXPR _range_@PROJECT_NAME@ "${_list_len_@PROJECT_NAME@}-1")
+ FOREACH(_p_@PROJECT_NAME@ RANGE ${_range_@PROJECT_NAME@})
+ LIST(GET _PREREQ_@PROJECT_NAME@ ${_p_@PROJECT_NAME@} _pkg_@PROJECT_NAME@ )
+ LIST(GET _PREREQ_@PROJECT_NAME@_CONFIG_DIR ${_p_@PROJECT_NAME@} _pkg_dir_@PROJECT_NAME@)
+ LIST(GET _PREREQ_@PROJECT_NAME@_COMPONENTS ${_p_@PROJECT_NAME@} _pkg_compo_@PROJECT_NAME@)
+ IF(NOT OMIT_DETECT_PACKAGE_${_pkg_@PROJECT_NAME@})
+ MESSAGE(STATUS "===> Reloading targets from ${_pkg_@PROJECT_NAME@} ...")
+ IF(NOT _pkg_compo_@PROJECT_NAME@)
+ FIND_PACKAGE(${_pkg_@PROJECT_NAME@} REQUIRED NO_MODULE
+ PATHS "${_pkg_dir_@PROJECT_NAME@}"
+ NO_DEFAULT_PATH)
+ ELSE()
+ STRING(REPLACE "," ";" _compo_lst_@PROJECT_NAME@ "${_pkg_compo_@PROJECT_NAME@}")
+ MESSAGE(STATUS "===> (components: ${_pkg_compo_@PROJECT_NAME@})")
+ FIND_PACKAGE(${_pkg_@PROJECT_NAME@} REQUIRED NO_MODULE
+ COMPONENTS ${_compo_lst_@PROJECT_NAME@}
+ PATHS "${_pkg_dir_@PROJECT_NAME@}"
+ NO_DEFAULT_PATH)
+ ENDIF()
ENDIF()
ENDFOREACH()
ENDIF()
SET(SALOME_INSTALL_SCRIPT_DATA "@SALOME_INSTALL_SCRIPT_DATA@")
SET(SALOME_INSTALL_SCRIPT_PYTHON "@SALOME_INSTALL_SCRIPT_PYTHON@")
SET(SALOME_INSTALL_APPLISKEL_SCRIPTS "@SALOME_INSTALL_APPLISKEL_SCRIPTS@")
-SET(SALOME_INSTALL_APPLISKEL_PYTHON "@SALOME_INSTALL_APPLISKEL_PYTHON@")
+SET(SALOME_INSTALL_APPLISKEL_PYTHON "@SALOME_INSTALL_APPLISKEL_PYTHON@")
SET(SALOME_INSTALL_CMAKE "@SALOME_INSTALL_CMAKE@")
SET(SALOME_INSTALL_CMAKE_LOCAL "@SALOME_INSTALL_CMAKE_LOCAL@")
SET(SALOME_INSTALL_PYTHON "@SALOME_INSTALL_PYTHON@")
SET(KERNEL_OpUtil OpUtil)
SET(KERNEL_Registry Registry)
SET(KERNEL_ResourcesManager ResourcesManager)
+SET(KERNEL_SALOMELog SALOMELog)
SET(KERNEL_SALOMEBasics SALOMEBasics)
SET(KERNEL_SalomeCatalog SalomeCatalog)
SET(KERNEL_SalomeCommunication SalomeCommunication)
SET(KERNEL_UtilsTest UtilsTest)
SET(KERNEL_with_loggerTraceCollector with_loggerTraceCollector)
SET(KERNEL_SalomeKernelHelpers SalomeKernelHelpers)
+SET(KERNEL_SalomeORB SalomeORB)
