-# - Config file for the @PROJECT_NAME@ package
-# It defines the following variables.
-# Specific to the pacakge @PROJECT_NAME@ itself:
-# @PROJECT_NAME_UC@_ROOT_DIR_EXP - the root path of the installation providing this CMake file
+# Copyright (C) 2013-2015 CEA/DEN, EDF R&D, OPEN CASCADE
#
-
-###############################################################
-# Copyright (C) 2007-2013 CEA/DEN, EDF R&D, OPEN CASCADE
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
#
-# Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
-# CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# Lesser General Public License for more details.
#
-# This library is free software; you can redistribute it and/or
-# modify it under the terms of the GNU Lesser General Public
-# License as published by the Free Software Foundation; either
-# version 2.1 of the License.
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
#
-# This library is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# Lesser General Public License for more details.
+# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
#
-# You should have received a copy of the GNU Lesser General Public
-# License along with this library; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+
+# - Config file for the @PROJECT_NAME@ package
+# It defines the following variables.
+# Specific to the pacakge @PROJECT_NAME@ itself:
+# @PROJECT_NAME_UC@_ROOT_DIR_EXP - the root path of the installation providing this CMake file
#
-# See http://www.salome-platform.org/ or
-# email : webmaster.salome@opencascade.com
-###############################################################
### Initialisation performed by CONFIGURE_PACKAGE_CONFIG_FILE:
@PACKAGE_INIT@
# Include directories
SET_AND_CHECK(GEOM_INCLUDE_DIRS "${GEOM_ROOT_DIR_EXP}/@SALOME_INSTALL_HEADERS@")
+SET(GEOM_INCLUDE_DIRS "${GEOM_INCLUDE_DIRS};@_SalomeGEOM_EXTRA_HEADERS@")
+SET(GEOM_DEFINITIONS "@KERNEL_DEFINITIONS@")
+
+# Package specific environment variables
+@_SalomeGEOM_EXTRA_ENV_FULL@
#### Now the specificities
# Options exported by the package:
-SET(SALOME_BUILD_DOC @SALOME_BUILD_DOC@)
-SET(SALOME_BUILD_TESTS @SALOME_BUILD_TESTS@)
+SET(SALOME_GEOM_BUILD_DOC @SALOME_BUILD_DOC@)
+SET(SALOME_GEOM_BUILD_TESTS @SALOME_BUILD_TESTS@)
# Advanced options
-SET(SALOME_BUILD_GUI @SALOME_BUILD_GUI@)
+SET(SALOME_GEOM_BUILD_GUI @SALOME_BUILD_GUI@)
SET(SALOME_GEOM_USE_OPENCV @SALOME_GEOM_USE_OPENCV@)
# Level 1 prerequisites:
SET_AND_CHECK(KERNEL_ROOT_DIR_EXP "@PACKAGE_KERNEL_ROOT_DIR@")
SET_AND_CHECK(CAS_ROOT_DIR_EXP "@PACKAGE_CAS_ROOT_DIR@")
+SET_AND_CHECK(VTK_ROOT_DIR_EXP "@PACKAGE_VTK_ROOT_DIR@")
# Optional level 1 prerequisites:
-IF(SALOME_BUILD_GUI)
+IF(SALOME_GEOM_BUILD_GUI)
SET_AND_CHECK(GUI_ROOT_DIR_EXP "@PACKAGE_GUI_ROOT_DIR@")
+ LIST(APPEND GEOM_DEFINITIONS "@GUI_DEFINITIONS@")
ENDIF()
IF(SALOME_GEOM_USE_OPENCV)
SET_AND_CHECK(OPENCV_ROOT_DIR_EXP "@PACKAGE_OPENCV_ROOT_DIR@")
+ LIST(APPEND GEOM_DEFINITIONS "-DWITH_OPENCV")
ENDIF()
# For all prerequisites, load the corresponding targets if the package was used
# in CONFIG mode. This ensures dependent projects link correctly
# without having to set LD_LIBRARY_PATH:
-SET(_PREREQ CAS SalomeGUI OpenCV)
-SET(_PREREQ_CONFIG_DIR "@CAS_DIR@" "@SalomeGUI_DIR@" "@OpenCV_DIR@")
+SET(_PREREQ @_PREREQ_LIST@)
+SET(_PREREQ_CONFIG_DIR @_PREREQ_DIR_LIST@)
+SET(_PREREQ_COMPONENTS "@_PREREQ_COMPO_LIST@")
LIST(LENGTH _PREREQ_CONFIG_DIR _list_len)
-# Another CMake stupidity - FOREACH(... RANGE r) generates r+1 numbers ...
-MATH(EXPR _range "${_list_len}-1")
-FOREACH(_p RANGE ${_range})
- LIST(GET _PREREQ ${_p} _pkg )
- LIST(GET _PREREQ_CONFIG_DIR ${_p} _pkg_dir)
- IF(_pkg_dir)
- MESSAGE(STATUS "===> Reloading targets from ${_pkg} ...")
- FIND_PACKAGE(${_pkg} REQUIRED NO_MODULE
+IF(NOT _list_len EQUAL 0)
+ # Another CMake stupidity - FOREACH(... RANGE r) generates r+1 numbers ...
+ MATH(EXPR _range "${_list_len}-1")
+ FOREACH(_p RANGE ${_range})
+ LIST(GET _PREREQ ${_p} _pkg )
+ LIST(GET _PREREQ_CONFIG_DIR ${_p} _pkg_dir)
+ LIST(GET _PREREQ_COMPONENTS ${_p} _pkg_compo)
+ MESSAGE(STATUS "===> Reloading targets from ${_pkg} ...")
+ IF(NOT _pkg_compo)
+ FIND_PACKAGE(${_pkg} REQUIRED NO_MODULE
PATHS "${_pkg_dir}"
NO_DEFAULT_PATH)
- ENDIF()
-ENDFOREACH()
+ ELSE()
+ STRING(REPLACE "," ";" _compo_lst "${_pkg_compo}")
+ MESSAGE(STATUS "===> (components: ${_pkg_compo})")
+ FIND_PACKAGE(${_pkg} REQUIRED NO_MODULE
+ COMPONENTS ${_compo_lst}
+ PATHS "${_pkg_dir}"
+ NO_DEFAULT_PATH)
+ ENDIF()
+ ENDFOREACH()
+ENDIF()
# Installation directories
SET(SALOME_INSTALL_BINS "@SALOME_INSTALL_BINS@")
SET(SALOME_INSTALL_DOC "@SALOME_INSTALL_DOC@")
SET(SALOME_INSTALL_AMCONFIG_LOCAL "@SALOME_INSTALL_AMCONFIG_LOCAL@")
-# Include KERNEL targets if they were not already loaded:
-IF(NOT (TARGET SALOMEBasics))
- INCLUDE("${KERNEL_ROOT_DIR_EXP}/${SALOME_INSTALL_CMAKE}/SalomeKERNELTargets.cmake")
-ENDIF()
+IF(SALOME_GEOM_BUILD_GUI)
+ # Include GUI targets if they were not already loaded:
+ IF(NOT (TARGET Event))
+ INCLUDE("${GUI_ROOT_DIR_EXP}/${SALOME_INSTALL_CMAKE_LOCAL}/SalomeGUITargets.cmake")
+ ENDIF()
+ELSE(SALOME_GEOM_BUILD_GUI)
+ # Include KERNEL targets if they were not already loaded:
+ IF(NOT (TARGET SALOMEBasics) AND NOT SALOME_MED_STANDALONE)
+ INCLUDE("${KERNEL_ROOT_DIR_EXP}/${SALOME_INSTALL_CMAKE}/SalomeKERNELTargets.cmake")
+ ENDIF()
+ENDIF(SALOME_GEOM_BUILD_GUI)
# Exposed GEOM targets:
SET(GEOM_GEOMArchimede GEOMArchimede)
-SET(GEOM_BREPExport BREPExport)
-SET(GEOM_BREPImport BREPImport)
SET(GEOM_BlockFix BlockFix)
SET(GEOM_GEOMbasic GEOMbasic)
SET(GEOM_GEOMAlgo GEOMAlgo)
SET(GEOM_GEOMUtils GEOMUtils)
SET(GEOM_GEOMEngine GEOMEngine)
SET(GEOM_GEOM_SupervEngine GEOM_SupervEngine)
-SET(GEOM_IGESExport IGESExport)
-SET(GEOM_IGESImport IGESImport)
SET(GEOM_GEOMSketcher GEOMSketcher)
SET(GEOM_SalomeIDLGEOM SalomeIDLGEOM)
-SET(GEOM_STEPExport STEPExport)
-SET(GEOM_STEPImport STEPImport)
-SET(GEOM_STLExport STLExport)
+SET(GEOM_SalomeIDLGEOMSuperv SalomeIDLGEOMSuperv)
+SET(GEOM_SalomeIDLAdvancedGEOM SalomeIDLAdvancedGEOM)
+SET(GEOM_SalomeIDLSTLPlugin SalomeIDLSTLPlugin)
+SET(GEOM_SalomeIDLBREPPlugin SalomeIDLBREPPlugin)
+SET(GEOM_SalomeIDLSTEPPlugin SalomeIDLSTEPPlugin)
+SET(GEOM_SalomeIDLIGESPlugin SalomeIDLIGESPlugin)
+SET(GEOM_SalomeIDLXAOPlugin SalomeIDLXAOPlugin)
+SET(GEOM_SalomeIDLVTKPlugin SalomeIDLVTKPlugin)
SET(GEOM_ShHealOper ShHealOper)
SET(GEOM_XAO XAO)
SET(GEOM_AdvancedEngine AdvancedEngine)
SET(GEOM_GEOMFiltersSelection GEOMFiltersSelection)
SET(GEOM_GEOM GEOM)
SET(GEOM_GEOMToolsGUI GEOMToolsGUI)
+SET(GEOM_DependencyTree DependencyTree)
SET(GEOM_GenerationGUI GenerationGUI)
SET(GEOM_GroupGUI GroupGUI)
SET(GEOM_Material Material)
SET(GEOM_MeasureGUI MeasureGUI)
SET(GEOM_GEOMObject GEOMObject)
SET(GEOM_OCC2VTK OCC2VTK)
-SET(GEOM_VTKExport VTKExport)
SET(GEOM_OperationGUI OperationGUI)
SET(GEOM_PrimitiveGUI PrimitiveGUI)
SET(GEOM_RepairGUI RepairGUI)
SET(GEOM_TransformationGUI TransformationGUI)
-SET(GEOM_ImportExportGUI ImportExportGUI)
+SET(GEOM_STLPluginGUI STLPluginGUI)
+SET(GEOM_STLPluginEngine STLPluginEngine)
+SET(GEOM_BREPPluginGUI BREPPluginGUI)
+SET(GEOM_BREPPluginEngine BREPPluginEngine)
+SET(GEOM_STEPPluginGUI STEPPluginGUI)
+SET(GEOM_STEPPluginEngine STEPPluginEngine)
+SET(GEOM_IGESPluginGUI IGESPluginGUI)
+SET(GEOM_IGESPluginEngine IGESPluginEngine)
+SET(GEOM_XAOPluginGUI XAOPluginGUI)
+SET(GEOM_XAOPluginEngine XAOPluginEngine)
+SET(GEOM_VTKPluginGUI VTKPluginGUI)
+SET(GEOM_VTKPluginEngine VTKPluginEngine)
SET(GEOM_GEOMShapeRec GEOMShapeRec)
+SET(GEOM_CurveCreator CurveCreator)