# - Config file for the @PROJECT_NAME@ package
# It defines the following variables.
-# Specific to the pacakge @PROJECT_NAME@ itself:
+# Specific to the package @PROJECT_NAME@ itself:
# @PROJECT_NAME_UC@_ROOT_DIR_EXP - the root path of the installation providing this CMake file
#
###############################################################
-# Copyright (C) 2013-2015 CEA/DEN, EDF R&D, OPEN CASCADE
+# Copyright (C) 2013-2020 CEA/DEN, EDF R&D, OPEN CASCADE
#
# This library is free software; you can redistribute it and/or
# modify it under the terms of the GNU Lesser General Public
# Load the dependencies for the libraries of @PROJECT_NAME@
# (contains definitions for IMPORTED targets). This is only
# imported if we are not built as a subproject (in this case targets are already there)
-IF(NOT TARGET medcoupling AND NOT @PROJECT_NAME@_BINARY_DIR)
+IF(NOT TARGET medcouplingcpp AND NOT @PROJECT_NAME@_BINARY_DIR)
INCLUDE("@PACKAGE_MEDCOUPLING_INSTALL_CMAKE_LOCAL@/@PROJECT_NAME@Targets.cmake")
ENDIF()
#### Now the specificities
# Options exported by the package:
-SET(MEDCOUPLING_MED_MICROMED @MEDCOUPLING_MED_MICROMED@)
-SET(MEDCOUPLING_MED_ENABLE_PYTHON @MEDCOUPLING_MED_ENABLE_PYTHON@)
+SET(MEDCOUPLING_MICROMED @MEDCOUPLING_MICROMED@)
+SET(MEDCOUPLING_ENABLE_PYTHON @MEDCOUPLING_ENABLE_PYTHON@)
SET(MEDCOUPLING_USE_MPI @MEDCOUPLING_USE_MPI@)
-SET(MEDCOUPLING_MED_BUILD_DOC @MEDCOUPLING_MED_BUILD_DOC@)
-SET(MEDCOUPLING_MED_BUILD_TESTS @MEDCOUPLING_MED_BUILD_TESTS@)
-SET(MEDCOUPLING_MED_BUILD_GUI @MEDCOUPLING_MED_BUILD_GUI@)
+SET(MEDCOUPLING_BUILD_DOC @MEDCOUPLING_BUILD_DOC@)
+SET(MEDCOUPLING_BUILD_TESTS @MEDCOUPLING_BUILD_TESTS@)
+SET(MEDCOUPLING_BUILD_GUI @MEDCOUPLING_BUILD_GUI@)
+SET(MEDCOUPLING_USE_64BIT_IDS @MEDCOUPLING_USE_64BIT_IDS@)
# Advanced options
# Optional level 1 prerequisites:
-IF(NOT MEDCOUPLING_MED_MICROMED)
+IF(NOT MEDCOUPLING_MICROMED)
SET_AND_CHECK(MEDFILE_ROOT_DIR_EXP "@PACKAGE_MEDFILE_ROOT_DIR@")
ENDIF()
-# For all prerequisites, load the corresponding targets if the package was used
+# For all prerequisites, load the corresponding targets if the package was used
# in CONFIG mode. This ensures dependent projects link correctly
# without having to set LD_LIBRARY_PATH:
-SET(_PREREQ @_PREREQ_LIST@)
-SET(_PREREQ_CONFIG_DIR @_PREREQ_DIR_LIST@)
-SET(_PREREQ_COMPONENTS "@_PREREQ_COMPO_LIST@")
-LIST(LENGTH _PREREQ_CONFIG_DIR _list_len)
-IF(NOT _list_len EQUAL 0)
+SET(_PREREQ_@PROJECT_NAME@ @_PREREQ_LIST@)
+SET(_PREREQ_@PROJECT_NAME@_CONFIG_DIR @_PREREQ_DIR_LIST@)
+SET(_PREREQ_@PROJECT_NAME@_COMPONENTS "@_PREREQ_COMPO_LIST@")
+LIST(LENGTH _PREREQ_@PROJECT_NAME@_CONFIG_DIR _list_len_@PROJECT_NAME@)
+IF(NOT _list_len_@PROJECT_NAME@ EQUAL 0)
# Another CMake stupidity - FOREACH(... RANGE r) generates r+1 numbers ...
- MATH(EXPR _range "${_list_len}-1")
- FOREACH(_p RANGE ${_range})
- LIST(GET _PREREQ ${_p} _pkg )
- LIST(GET _PREREQ_CONFIG_DIR ${_p} _pkg_dir)
- LIST(GET _PREREQ_COMPONENTS ${_p} _pkg_compo)
- MESSAGE(STATUS "===> Reloading targets from ${_pkg} ...")
- IF(NOT _pkg_compo)
- FIND_PACKAGE(${_pkg} REQUIRED NO_MODULE
- PATHS "${_pkg_dir}"
- NO_DEFAULT_PATH)
- ELSE()
- STRING(REPLACE "," ";" _compo_lst "${_pkg_compo}")
- MESSAGE(STATUS "===> (components: ${_pkg_compo})")
- FIND_PACKAGE(${_pkg} REQUIRED NO_MODULE
- COMPONENTS ${_compo_lst}
- PATHS "${_pkg_dir}"
- NO_DEFAULT_PATH)
+ MATH(EXPR _range_@PROJECT_NAME@ "${_list_len_@PROJECT_NAME@}-1")
+ FOREACH(_p_@PROJECT_NAME@ RANGE ${_range_@PROJECT_NAME@})
+ LIST(GET _PREREQ_@PROJECT_NAME@ ${_p_@PROJECT_NAME@} _pkg_@PROJECT_NAME@ )
+ LIST(GET _PREREQ_@PROJECT_NAME@_CONFIG_DIR ${_p_@PROJECT_NAME@} _pkg_dir_@PROJECT_NAME@)
+ LIST(GET _PREREQ_@PROJECT_NAME@_COMPONENTS ${_p_@PROJECT_NAME@} _pkg_compo_@PROJECT_NAME@)
+ IF(NOT OMIT_DETECT_PACKAGE_${_pkg_@PROJECT_NAME@})
+ MESSAGE(STATUS "===> Reloading targets from ${_pkg_@PROJECT_NAME@} ...")
+ IF(NOT _pkg_compo_@PROJECT_NAME@)
+ FIND_PACKAGE(${_pkg_@PROJECT_NAME@} REQUIRED NO_MODULE
+ PATHS "${_pkg_dir_@PROJECT_NAME@}"
+ NO_DEFAULT_PATH)
+ ELSE()
+ STRING(REPLACE "," ";" _compo_lst_@PROJECT_NAME@ "${_pkg_compo_@PROJECT_NAME@}")
+ MESSAGE(STATUS "===> (components: ${_pkg_compo_@PROJECT_NAME@})")
+ FIND_PACKAGE(${_pkg_@PROJECT_NAME@} REQUIRED NO_MODULE
+ COMPONENTS ${_compo_lst_@PROJECT_NAME@}
+ PATHS "${_pkg_dir_@PROJECT_NAME@}"
+ NO_DEFAULT_PATH)
+ ENDIF()
ENDIF()
ENDFOREACH()
ENDIF()
SET(MEDCOUPLING_INSTALL_TESTS "@MEDCOUPLING_INSTALL_BINS@")
SET(MEDCOUPLING_INSTALL_SCRIPT_PYTHON "@MEDCOUPLING_INSTALL_BINS@")
SET(MEDCOUPLING_INSTALL_CMAKE_LOCAL "@MEDCOUPLING_INSTALL_BINS@")
-IF(MEDCOUPLING_MED_ENABLE_PYTHON)
+IF(MEDCOUPLING_ENABLE_PYTHON)
SET(MEDCOUPLING_INSTALL_PYTHON "@MEDCOUPLING_INSTALL_BINS@")
SET(MEDCOUPLING_INSTALL_PYTHON_SHARED "@MEDCOUPLING_INSTALL_BINS@")
-ENDIF(MEDCOUPLING_MED_ENABLE_PYTHON)
+ENDIF(MEDCOUPLING_ENABLE_PYTHON)
SET(MEDCOUPLING_INSTALL_RES "@MEDCOUPLING_INSTALL_BINS@")
SET(MEDCOUPLING_INSTALL_DOC "@MEDCOUPLING_INSTALL_BINS@")
# Exposed MEDCoupling targets:
SET(MEDCoupling_interpkernel interpkernel)
-SET(MEDCoupling_medcoupling medcoupling)
+SET(MEDCoupling_medcouplingcpp medcouplingcpp)
+SET(MEDCoupling_medcoupling medcouplingcpp)
SET(MEDCoupling_medcouplingremapper medcouplingremapper)
SET(MEDCoupling_medloader medloader)
SET(MEDCoupling_renumbercpp renumbercpp)