-# Copyright (C) 2012-2013 CEA/DEN, EDF R&D, OPEN CASCADE
+# Copyright (C) 2012-2021 CEA/DEN, EDF R&D
#
# This library is free software; you can redistribute it and/or
# modify it under the terms of the GNU Lesser General Public
# License as published by the Free Software Foundation; either
-# version 2.1 of the License.
+# version 2.1 of the License, or (at your option) any later version.
#
# This library is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
#
CMAKE_MINIMUM_REQUIRED(VERSION 2.8.8 FATAL_ERROR)
-PROJECT(SalomeGHS3DPLUGIN C CXX)
-# Ensure a proper linker behavior:
-CMAKE_POLICY(SET CMP0003 NEW)
+# Project name
+# ============
+# original
+PROJECT(SalomeHYBRIDPLUGIN C CXX)
+# upper case
+STRING(TOUPPER ${PROJECT_NAME} PROJECT_NAME_UC)
+
+# Common CMake macros
+# ===================
+SET(CONFIGURATION_ROOT_DIR $ENV{CONFIGURATION_ROOT_DIR} CACHE PATH "Path to the Salome CMake configuration files")
+IF(EXISTS ${CONFIGURATION_ROOT_DIR})
+ LIST(APPEND CMAKE_MODULE_PATH "${CONFIGURATION_ROOT_DIR}/cmake")
+ INCLUDE(SalomeMacros NO_POLICY_SCOPE)
+ELSE()
+ MESSAGE(FATAL_ERROR "We absolutely need the Salome CMake configuration files, please define CONFIGURATION_ROOT_DIR !")
+ENDIF()
# Versioning
# ===========
-# Project name, upper case
-STRING(TOUPPER ${PROJECT_NAME} PROJECT_NAME_UC)
-
-SET(${PROJECT_NAME_UC}_MAJOR_VERSION 7)
-SET(${PROJECT_NAME_UC}_MINOR_VERSION 2)
-SET(${PROJECT_NAME_UC}_PATCH_VERSION 0)
-SET(${PROJECT_NAME_UC}_VERSION
- ${${PROJECT_NAME_UC}_MAJOR_VERSION}.${${PROJECT_NAME_UC}_MINOR_VERSION}.${${PROJECT_NAME_UC}_PATCH_VERSION})
-SET(${PROJECT_NAME_UC}_VERSION_DEV 1)
+SALOME_SETUP_VERSION(9.8.0 DEVELOPMENT)
+MESSAGE(STATUS "Building ${PROJECT_NAME_UC} ${${PROJECT_NAME_UC}_VERSION} from \"${${PROJECT_NAME_UC}_GIT_SHA1}\"")
# Find KERNEL
# ===========
SET(KERNEL_ROOT_DIR $ENV{KERNEL_ROOT_DIR} CACHE PATH "Path to the Salome KERNEL")
IF(EXISTS ${KERNEL_ROOT_DIR})
- LIST(APPEND CMAKE_MODULE_PATH "${KERNEL_ROOT_DIR}/salome_adm/cmake_files")
- INCLUDE(SalomeMacros)
FIND_PACKAGE(SalomeKERNEL REQUIRED)
ELSE(EXISTS ${KERNEL_ROOT_DIR})
MESSAGE(FATAL_ERROR "We absolutely need a Salome KERNEL, please define KERNEL_ROOT_DIR")
ENDIF(EXISTS ${KERNEL_ROOT_DIR})
IF(SALOME_LIGHT_ONLY)
- MESSAGE(FATAL_ERROR "GHS3DPLUGIN module can't be built in Light mode (without CORBA)")
+ MESSAGE(FATAL_ERROR "HYBRIDPLUGIN module can't be built in Light mode (without CORBA)")
ENDIF()
# Platform setup
INCLUDE(SalomeSetupPlatform) # From KERNEL
# Always build libraries as shared objects:
SET(BUILD_SHARED_LIBS TRUE)
-# Local macros:
-LIST(APPEND CMAKE_MODULE_PATH "${PROJECT_SOURCE_DIR}/adm_local/cmake_files")
-# User options
+# User options
# ============
OPTION(SALOME_BUILD_TESTS "Build SALOME tests" ON)
-OPTION(SALOME_BUILD_DOC "Generate SALOME GHS3DPLUGIN documentation" ON)
+OPTION(SALOME_BUILD_DOC "Generate SALOME HYBRIDPLUGIN documentation" ON)
+OPTION(SALOME_USE_MG_LIBS "Use MeshGems libraries" OFF)
+MARK_AS_ADVANCED(SALOME_USE_MG_LIBS)
IF(SALOME_BUILD_TESTS)
ENABLE_TESTING()
# Advanced options:
OPTION(SALOME_BUILD_GUI "Enable GUI" ON)
-
##
## From KERNEL:
##
# Various
# Python
-FIND_PACKAGE(SalomePython REQUIRED)
+FIND_PACKAGE(SalomePythonInterp)
+FIND_PACKAGE(SalomePythonLibs)
# Boost
FIND_PACKAGE(SalomeBoost REQUIRED)
# CORBA
IF(SALOME_BUILD_GUI)
SET(GUI_ROOT_DIR $ENV{GUI_ROOT_DIR} CACHE PATH "Path to the Salome GUI")
IF(EXISTS ${GUI_ROOT_DIR})
- LIST(APPEND CMAKE_MODULE_PATH "${GUI_ROOT_DIR}/adm_local/cmake_files")
FIND_PACKAGE(SalomeGUI)
+ SALOME_GUI_WITH_CORBA() #check whether GUI builded with CORBA
ADD_DEFINITIONS(${GUI_DEFINITIONS})
INCLUDE_DIRECTORIES(${GUI_INCLUDE_DIRS})
ELSE(EXISTS ${GUI_ROOT_DIR})
##
## From GUI:
##
-
IF(SALOME_BUILD_GUI)
- # Qt4
- FIND_PACKAGE(SalomeQt4 REQUIRED COMPONENTS QtCore QtGui)
+ # Qt
+ FIND_PACKAGE(SalomeQt5 REQUIRED)
ENDIF(SALOME_BUILD_GUI)
-# OCCT
-FIND_PACKAGE(SalomeCAS REQUIRED)
+
# VTK
-FIND_PACKAGE(SalomeVTK 6.0 REQUIRED)
+FIND_PACKAGE(SalomeVTK REQUIRED)
+# OCCT
+FIND_PACKAGE(SalomeOpenCASCADE REQUIRED)
# Find GEOM
# ===========
SET(GEOM_ROOT_DIR $ENV{GEOM_ROOT_DIR} CACHE PATH "Path to the Salome GEOM")
IF(EXISTS ${GEOM_ROOT_DIR})
- LIST(APPEND CMAKE_MODULE_PATH "${GEOM_ROOT_DIR}/adm_local/cmake_files")
FIND_PACKAGE(SalomeGEOM REQUIRED)
ELSE(EXISTS ${GEOM_ROOT_DIR})
MESSAGE(FATAL_ERROR "We absolutely need a Salome GEOM, please define GEOM_ROOT_DIR")
# Find SMESH
# ===========
-
SET(SMESH_ROOT_DIR $ENV{SMESH_ROOT_DIR} CACHE PATH "Path to the Salome SMESH")
IF(EXISTS ${SMESH_ROOT_DIR})
- LIST(APPEND CMAKE_MODULE_PATH "${SMESH_ROOT_DIR}/adm_local/cmake_files")
FIND_PACKAGE(SalomeSMESH REQUIRED)
ADD_DEFINITIONS(${SMESH_DEFINITIONS})
INCLUDE_DIRECTORIES(${SMESH_INCLUDE_DIRS})
MESSAGE(FATAL_ERROR "We absolutely need a Salome SMESH with GUI, please set SALOME_BUILD_GUI=ON in SMESH module")
ENDIF(NOT SALOME_SMESH_BUILD_GUI)
ENDIF(SALOME_BUILD_GUI)
+ IF(SALOME_BUILD_DOC)
+ IF(NOT SALOME_SMESH_BUILD_DOC)
+ MESSAGE(FATAL_ERROR "We absolutely need a Salome SMESH documentation to build HYBRIDPLUGIN documentation. "
+ "So, you should either set SALOME_BUILD_DOC=OFF in HYBRIDPLUGIN or set SALOME_BUILD_DOC=ON in SMESH module.")
+ ENDIF(NOT SALOME_SMESH_BUILD_DOC)
+ ENDIF(SALOME_BUILD_DOC)
ELSE(EXISTS ${SMESH_ROOT_DIR})
MESSAGE(FATAL_ERROR "We absolutely need a Salome SMESH, please define SMESH_ROOT_DIR")
ENDIF(EXISTS ${SMESH_ROOT_DIR})
+# MEDFile
+FIND_PACKAGE(SalomeMEDFile REQUIRED)
+
+# Find MESHGEMS
+# =============
+IF(SALOME_USE_MG_LIBS)
+ FIND_PACKAGE(SalomeMESHGEMS)
+ SALOME_LOG_OPTIONAL_PACKAGE(MESHGEMS SALOME_USE_MG_LIBS)
+ ADD_DEFINITIONS(-DUSE_MG_LIBS)
+ENDIF(SALOME_USE_MG_LIBS)
+
+
# Detection summary:
SALOME_PACKAGE_REPORT_AND_CHECK()
SET(SALOME_INSTALL_RES "${SALOME_INSTALL_RES}" CACHE PATH "Install path: SALOME resources")
SET(SALOME_INSTALL_DOC "${SALOME_INSTALL_DOC}" CACHE PATH "Install path: SALOME documentation")
-# Specific to GHS3DPLUGIN:
-SET(SALOME_GHS3DPLUGIN_INSTALL_RES_DATA "${SALOME_INSTALL_RES}/ghs3dplugin" CACHE PATH
- "Install path: SALOME GHS3DPLUGIN specific data")
+# Specific to HYBRIDPLUGIN:
+SET(SALOME_HYBRIDPLUGIN_INSTALL_RES_DATA "${SALOME_INSTALL_RES}/hybridplugin" CACHE PATH
+ "Install path: SALOME HYBRIDPLUGIN specific data")
+SET(SALOME_HYBRIDPLUGIN_INSTALL_TESTS ${SALOME_INSTALL_BINS}/test)
MARK_AS_ADVANCED(SALOME_INSTALL_BINS SALOME_INSTALL_LIBS SALOME_INSTALL_IDLS SALOME_INSTALL_HEADERS)
MARK_AS_ADVANCED(SALOME_INSTALL_SCRIPT_SCRIPTS SALOME_INSTALL_SCRIPT_DATA SALOME_INSTALL_SCRIPT_PYTHON)
MARK_AS_ADVANCED(SALOME_INSTALL_APPLISKEL_SCRIPTS SALOME_INSTALL_APPLISKEL_PYTHON SALOME_INSTALL_CMAKE_LOCAL SALOME_INSTALL_RES)
MARK_AS_ADVANCED(SALOME_INSTALL_PYTHON SALOME_INSTALL_PYTHON_SHARED)
MARK_AS_ADVANCED(SALOME_INSTALL_AMCONFIG_LOCAL SALOME_INSTALL_DOC)
-MARK_AS_ADVANCED(SALOME_GHS3DPLUGIN_INSTALL_RES_DATA)
+MARK_AS_ADVANCED(SALOME_HYBRIDPLUGIN_INSTALL_RES_DATA)
-# Accumulate environment variables for GHS3DPLUGIN module
+# Accumulate environment variables for HYBRIDPLUGIN module
SALOME_ACCUMULATE_ENVIRONMENT(PYTHONPATH NOCHECK ${CMAKE_INSTALL_PREFIX}/${SALOME_INSTALL_BINS}
- ${CMAKE_INSTALL_PREFIX}/${SALOME_INSTALL_PYTHON})
+ ${CMAKE_INSTALL_PREFIX}/${SALOME_INSTALL_PYTHON})
SALOME_ACCUMULATE_ENVIRONMENT(LD_LIBRARY_PATH NOCHECK ${CMAKE_INSTALL_PREFIX}/${SALOME_INSTALL_LIBS})
+
# Sources
# ========
IF(SALOME_BUILD_DOC)
ADD_SUBDIRECTORY(doc)
ENDIF(SALOME_BUILD_DOC)
+IF(SALOME_BUILD_TESTS)
+ ADD_SUBDIRECTORY(tests)
+ENDIF(SALOME_BUILD_TESTS)
# Header configuration
# ====================
-SALOME_XVERSION(${PROJECT_NAME})
-SALOME_CONFIGURE_FILE(GHS3DPLUGIN_version.h.in GHS3DPLUGIN_version.h INSTALL ${SALOME_INSTALL_HEADERS})
+SALOME_CONFIGURE_FILE(HYBRIDPLUGIN_version.h.in HYBRIDPLUGIN_version.h INSTALL ${SALOME_INSTALL_HEADERS})
# Configuration export
# (here only the level 1 prerequisites are exposed)
# List of targets in this project we want to make visible to the rest of the world.
# They all have to be INSTALL'd with the option "EXPORT ${PROJECT_NAME}TargetGroup"
SET(_${PROJECT_NAME}_exposed_targets
- GHS3DEngine SalomeIDLGHS3DPLUGIN
+ HYBRIDEngine SalomeIDLHYBRIDPLUGIN
)
IF(SALOME_BUILD_GUI)
LIST(APPEND _${PROJECT_NAME}_exposed_targets
- GHS3DPluginGUI
+ HYBRIDPluginGUI
)
ENDIF(SALOME_BUILD_GUI)
# Ensure the variables are always defined for the configure:
SET(SMESH_ROOT_DIR "${SMESH_ROOT_DIR}")
+SET(MESHGEMS_ROOT_DIR "${MESHGEMS_ROOT_DIR}")
SET(CONF_INCLUDE_DIRS "${PROJECT_SOURCE_DIR}/include" "${PROJECT_BINARY_DIR}/include")
${PROJECT_BINARY_DIR}/${PROJECT_NAME}Config.cmake
INSTALL_DESTINATION "${SALOME_INSTALL_CMAKE_LOCAL}"
PATH_VARS CONF_INCLUDE_DIRS SALOME_INSTALL_CMAKE_LOCAL CMAKE_INSTALL_PREFIX
- SMESH_ROOT_DIR)
+ SMESH_ROOT_DIR MESHGEMS_ROOT_DIR)
WRITE_BASIC_PACKAGE_VERSION_FILE(${PROJECT_BINARY_DIR}/${PROJECT_NAME}ConfigVersion.cmake
VERSION ${${PROJECT_NAME_UC}_VERSION}
