-# Copyright (C) 2012-2013 CEA/DEN, EDF R&D, OPEN CASCADE
+# Copyright (C) 2012-2016 CEA/DEN, EDF R&D, OPEN CASCADE
#
# This library is free software; you can redistribute it and/or
# modify it under the terms of the GNU Lesser General Public
# License as published by the Free Software Foundation; either
-# version 2.1 of the License.
+# version 2.1 of the License, or (at your option) any later version.
#
# This library is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
#
CMAKE_MINIMUM_REQUIRED(VERSION 2.8.8 FATAL_ERROR)
+INCLUDE(CMakeDependentOption)
+
PROJECT(SalomeGUI C CXX)
# Ensure a proper linker behavior:
STRING(TOUPPER ${PROJECT_NAME} PROJECT_NAME_UC)
SET(${PROJECT_NAME_UC}_MAJOR_VERSION 7)
-SET(${PROJECT_NAME_UC}_MINOR_VERSION 2)
+SET(${PROJECT_NAME_UC}_MINOR_VERSION 7)
SET(${PROJECT_NAME_UC}_PATCH_VERSION 0)
SET(${PROJECT_NAME_UC}_VERSION
${${PROJECT_NAME_UC}_MAJOR_VERSION}.${${PROJECT_NAME_UC}_MINOR_VERSION}.${${PROJECT_NAME_UC}_PATCH_VERSION})
LIST(APPEND CMAKE_MODULE_PATH "${PROJECT_SOURCE_DIR}/adm_local/cmake_files")
# User options
-# (some options have already been defined in KERNEL)
# ============
-OPTION(SALOME_BUILD_DOC "Generate SALOME GUI documentation" ${SALOME_BUILD_DOC})
-OPTION(SALOME_BUILD_TESTS "Build SALOME tests" ${SALOME_BUILD_TESTS})
+OPTION(SALOME_BUILD_DOC "Generate SALOME GUI documentation" ON)
+OPTION(SALOME_BUILD_TESTS "Build SALOME tests" ON)
+OPTION(SALOME_GUI_USE_OBSERVERS "Use study observers in GUI (advanced)" ON)
# Advanced options:
+CMAKE_DEPENDENT_OPTION(SALOME_LIGHT_ONLY "Build SALOME Light only (no CORBA)" OFF
+ "NOT SALOME_KERNEL_LIGHT_ONLY" ON)
OPTION(SALOME_USE_VTKVIEWER "Enable VTK visualization (Mandatory in classic configurations)" ON)
-OPTION(SALOME_USE_SALOMEOBJECT "Enable Salome Object (Mandatory in classic configurations)" ON)
OPTION(SALOME_USE_OCCVIEWER "Enable OCC visualization (Mandatory in classic configurations)" ON)
OPTION(SALOME_USE_GLVIEWER "Enable OpenGL visualization (Mandatory in classic configurations)" ON)
+OPTION(SALOME_USE_GRAPHICSVIEW "Enable GraphicsView visualization (Mandatory in classic configurations)" ON)
+OPTION(SALOME_USE_PYVIEWER "Enable Python viewer (Mandatory in classic configurations)" ON)
OPTION(SALOME_USE_PLOT2DVIEWER "Enable Plot2D visualization (Mandatory in classic configurations)" ON)
OPTION(SALOME_USE_PYCONSOLE "Enable Python GUI interface (Mandatory in classic configurations)" ON)
OPTION(SALOME_USE_QXGRAPHVIEWER "Enable QX graph visualization (Mandatory in classic configurations)" ON)
+OPTION(SALOME_USE_PVVIEWER "Enable ParaView visualization (Mandatory in classic configurations)" ON)
+CMAKE_DEPENDENT_OPTION(SALOME_USE_SALOMEOBJECT "Enable Salome Object (Mandatory in classic configurations)" ON
+ "SALOME_LIGHT_ONLY" ON)
+OPTION(SALOME_USE_SINGLE_DESKTOP "Enable multiple document interface" ON)
-MARK_AS_ADVANCED(SALOME_USE_VTKVIEWER SALOME_USE_VTKVIEWER)
+MARK_AS_ADVANCED(SALOME_LIGHT_ONLY SALOME_USE_VTKVIEWER SALOME_USE_GRAPHICSVIEW SALOME_USE_PVVIEWER)
MARK_AS_ADVANCED(SALOME_USE_SALOMEOBJECT SALOME_USE_OCCVIEWER SALOME_USE_GLVIEWER SALOME_USE_PLOT2DVIEWER)
-MARK_AS_ADVANCED(SALOME_USE_PYCONSOLE SALOME_USE_QXGRAPHVIEWER)
+MARK_AS_ADVANCED(SALOME_USE_PYCONSOLE SALOME_USE_QXGRAPHVIEWER SALOME_USE_PYVIEWER)
+MARK_AS_ADVANCED(SALOME_USE_SINGLE_DESKTOP)
# Prerequisites
# =============
##
# Various
-FIND_PACKAGE(SalomePython REQUIRED)
+FIND_PACKAGE(SalomePythonInterp REQUIRED)
+FIND_PACKAGE(SalomePythonLibs REQUIRED)
FIND_PACKAGE(SalomePThread REQUIRED)
FIND_PACKAGE(SalomeSWIG REQUIRED)
-FIND_PACKAGE(SalomeLibXml2 REQUIRED)
FIND_PACKAGE(SalomeBoost REQUIRED)
FIND_PACKAGE(SalomeHDF5 REQUIRED COMPONENTS C)
IF(NOT SALOME_LIGHT_ONLY)
FIND_PACKAGE(SalomeOmniORB REQUIRED)
FIND_PACKAGE(SalomeOmniORBPy REQUIRED)
+ELSE()
+ ADD_DEFINITIONS("-DGUI_DISABLE_CORBA")
ENDIF()
IF(SALOME_BUILD_TESTS)
ENABLE_TESTING()
FIND_PACKAGE(SalomeSIP REQUIRED) # should come after Python and before PyQt4
# Build with GUI observers feature
-ADD_DEFINITIONS(-DWITH_SALOMEDS_OBSERVER)
+IF(SALOME_GUI_USE_OBSERVERS)
+ ADD_DEFINITIONS(-DWITH_SALOMEDS_OBSERVER)
+ENDIF()
-#OCCT
+# Single-study GUI
+IF(SALOME_USE_SINGLE_DESKTOP)
+ ADD_DEFINITIONS(-DSINGLE_DESKTOP)
+ENDIF()
+
+# OCCT
FIND_PACKAGE(SalomeCAS REQUIRED)
+# OpenGL
+IF(SALOME_USE_OCCVIEWER OR SALOME_USE_VTKVIEWER OR SALOME_USE_GLVIEWER)
+ FIND_PACKAGE(SalomeOpenGL REQUIRED)
+ENDIF()
+
# Qt4
-FIND_PACKAGE(SalomeQt4 REQUIRED COMPONENTS QtCore QtGui QtXml QtWebKit QtOpenGL)
-INCLUDE(${QT_USE_FILE})
+FIND_PACKAGE(SalomeQt4 REQUIRED COMPONENTS QtCore QtGui QtXml QtWebKit QtOpenGL QtNetwork)
+# PyQt4
FIND_PACKAGE(SalomePyQt4 REQUIRED)
-# Optional prerequisites for GUI
-IF(SALOME_USE_GLVIEWER)
- FIND_PACKAGE(SalomeOpenGL)
- SALOME_LOG_OPTIONAL_PACKAGE(OpenGL SALOME_USE_GLVIEWER)
+# Optional packages for GUI and their pre-requisites
+
+# - GL viewer: no prereqs
+IF(NOT SALOME_USE_GLVIEWER)
+ ADD_DEFINITIONS("-DDISABLE_GLVIEWER")
+ENDIF()
+
+# - OCC viewer: no prereqs
+IF(NOT SALOME_USE_OCCVIEWER)
+ ADD_DEFINITIONS("-DDISABLE_OCCVIEWER")
ENDIF()
+
+# - PV viewer: ParaView
+IF (SALOME_USE_PVVIEWER)
+ FIND_PACKAGE(SalomeParaView)
+ SALOME_LOG_OPTIONAL_PACKAGE(ParaView SALOME_USE_PVVIEWER)
+ELSE()
+ ADD_DEFINITIONS("-DDISABLE_PVVIEWER")
+ENDIF()
+
+# - VTK viewer: VTK
IF(SALOME_USE_VTKVIEWER)
# Required components are listed in the FindSalomeVTK.cmake file:
- FIND_PACKAGE(SalomeVTK 6.0)
+ FIND_PACKAGE(SalomeVTK)
SALOME_LOG_OPTIONAL_PACKAGE(VTK SALOME_USE_VTKVIEWER)
+ELSE()
+ ADD_DEFINITIONS("-DDISABLE_VTKVIEWER")
ENDIF()
+
+# - Plot2d viewer: Qwt
IF(SALOME_USE_PLOT2DVIEWER)
FIND_PACKAGE(SalomeQwt)
SALOME_LOG_OPTIONAL_PACKAGE(Qwt SALOME_USE_PLOT2DVIEWER)
+ELSE()
+ ADD_DEFINITIONS("-DDISABLE_PLOT2DVIEWER")
+ENDIF()
+
+# - Graphics viewer: no prereqs
+IF (NOT SALOME_USE_GRAPHICSVIEW)
+ ADD_DEFINITIONS("-DDISABLE_GRAPHICSVIEW")
+ENDIF()
+
+# - Python editor: no prereqs
+IF (NOT SALOME_USE_PYVIEWER)
+ ADD_DEFINITIONS("-DDISABLE_PYVIEWER")
+ENDIF()
+
+# - Python console: no prereqs
+IF(SALOME_USE_PYCONSOLE)
+ # Build with obsolete Python module's methods
+ ADD_DEFINITIONS(-DCALL_OLD_METHODS)
+ELSE()
+ ADD_DEFINITIONS("-DDISABLE_PYCONSOLE")
+ENDIF()
+
+# - Qx viewer: no prereqs
+IF(NOT SALOME_USE_QXGRAPHVIEWER)
+ ADD_DEFINITIONS("-DDISABLE_QXGRAPHVIEWER")
+ENDIF()
+
+# - SALOME object: no prereqs
+IF(NOT SALOME_USE_SALOMEOBJECT)
+ ADD_DEFINITIONS("-DDISABLE_SALOMEOBJECT")
ENDIF()
# Detection summary:
MARK_AS_ADVANCED(SALOME_GUI_INSTALL_PARAVIEW_LIBS SALOME_GUI_INSTALL_RES_DATA SALOME_GUI_INSTALL_RES_SCRIPTS SALOME_GUI_INSTALL_PLUGINS)
MARK_AS_ADVANCED(SALOME_INSTALL_AMCONFIG_LOCAL SALOME_INSTALL_DOC)
+# Accumulate environment variables for GUI module
+SALOME_ACCUMULATE_ENVIRONMENT(PYTHONPATH NOCHECK ${CMAKE_INSTALL_PREFIX}/${SALOME_INSTALL_BINS}
+ ${CMAKE_INSTALL_PREFIX}/${SALOME_INSTALL_PYTHON}
+ ${CMAKE_INSTALL_PREFIX}/${SALOME_INSTALL_PYTHON_SHARED})
+SALOME_ACCUMULATE_ENVIRONMENT(LD_LIBRARY_PATH NOCHECK ${CMAKE_INSTALL_PREFIX}/${SALOME_INSTALL_LIBS}
+ ${CMAKE_INSTALL_PREFIX}/${SALOME_GUI_INSTALL_PARAVIEW_LIBS})
+
# Sources
# ========
IF(NOT SALOME_LIGHT_ONLY)
# List of targets in this project we want to make visible to the rest of the world.
# They all have to be INSTALL'd with the option "EXPORT ${PROJECT_NAME}TargetGroup"
SET(_${PROJECT_NAME}_exposed_targets
- caf CAM CASCatch DDS Event GLViewer LightApp LogWindow ObjBrowser
- OCCViewer OpenGLUtils Plot2d PyConsole PyInterp QDS qtx QxScene SalomeApp
- SalomeIDLGUI SalomeObject SalomePrs SalomePyQtGUILight SalomePyQtGUI
- SalomePyQt SalomePy SalomeSession SalomeStyle SOCC SPlot2d std SUITApp suit
- SVTK ToolsGUI ViewerTools VTKViewer vtkTools vtkEDFOverloads SalomeGuiHelpers
- SalomeTreeData
+ caf CAM CASCatch DDS Event LightApp LogWindow ObjBrowser
+ QDS qtx SalomePrs SalomeStyle std SUITApp suit ViewerTools ViewerData
+ ImageComposer
)
+IF(SALOME_USE_OCCVIEWER OR SALOME_USE_VTKVIEWER OR SALOME_USE_GLVIEWER)
+ LIST(APPEND _${PROJECT_NAME}_exposed_targets
+ OpenGLUtils)
+ENDIF(SALOME_USE_OCCVIEWER OR SALOME_USE_VTKVIEWER OR SALOME_USE_GLVIEWER)
+
+# SALOME object specific targets:
+IF(SALOME_USE_SALOMEOBJECT)
+ LIST(APPEND _${PROJECT_NAME}_exposed_targets
+ SalomeObject)
+ENDIF(SALOME_USE_SALOMEOBJECT)
+
+# GL specific targets:
+IF(SALOME_USE_GLVIEWER)
+ LIST(APPEND _${PROJECT_NAME}_exposed_targets
+ GLViewer)
+ENDIF(SALOME_USE_GLVIEWER)
+
+# VTK specific targets:
+IF(SALOME_USE_VTKVIEWER)
+ LIST(APPEND _${PROJECT_NAME}_exposed_targets
+ VTKViewer vtkTools vtkEDFOverloads)
+ IF(SALOME_USE_SALOMEOBJECT)
+ LIST(APPEND _${PROJECT_NAME}_exposed_targets
+ SVTK)
+ ENDIF(SALOME_USE_SALOMEOBJECT)
+ENDIF(SALOME_USE_VTKVIEWER)
+
+# OCC specific targets:
+IF(SALOME_USE_OCCVIEWER)
+ LIST(APPEND _${PROJECT_NAME}_exposed_targets
+ OCCViewer)
+ IF(SALOME_USE_SALOMEOBJECT)
+ LIST(APPEND _${PROJECT_NAME}_exposed_targets
+ SOCC)
+ ENDIF(SALOME_USE_SALOMEOBJECT)
+ENDIF(SALOME_USE_OCCVIEWER)
+
+# Plot2d specific targets:
+IF(SALOME_USE_PLOT2DVIEWER)
+ LIST(APPEND _${PROJECT_NAME}_exposed_targets
+ Plot2d)
+ IF(SALOME_USE_SALOMEOBJECT)
+ LIST(APPEND _${PROJECT_NAME}_exposed_targets
+ SPlot2d)
+ ENDIF(SALOME_USE_SALOMEOBJECT)
+ENDIF(SALOME_USE_PLOT2DVIEWER)
+
+# Qx specific targets:
+IF(SALOME_USE_QXGRAPHVIEWER)
+ LIST(APPEND _${PROJECT_NAME}_exposed_targets
+ QxScene)
+ENDIF(SALOME_USE_QXGRAPHVIEWER)
+
+# GraphicsView specific targets:
+IF(SALOME_USE_GRAPHICSVIEW)
+ LIST(APPEND _${PROJECT_NAME}_exposed_targets
+ GraphicsView)
+ENDIF(SALOME_USE_GRAPHICSVIEW)
+
+# PyEditor/Viewer specific targets:
+IF(SALOME_USE_PYVIEWER)
+ LIST(APPEND _${PROJECT_NAME}_exposed_targets
+ PyEditor PyViewer)
+ENDIF(SALOME_USE_PYVIEWER)
+
+# ParaView viewer specific targets:
+IF(SALOME_USE_PVVIEWER)
+ LIST(APPEND _${PROJECT_NAME}_exposed_targets PVViewer PVServerService)
+ENDIF()
+
+
+# Python-based packages specific targets:
+IF(SALOME_USE_PYCONSOLE)
+ LIST(APPEND _${PROJECT_NAME}_exposed_targets
+ PyInterp PyConsole SalomePyConsole SalomePyQtGUILight)
+ IF(SALOME_USE_PLOT2DVIEWER)
+ LIST(APPEND _${PROJECT_NAME}_exposed_targets SalomePyQt)
+ ENDIF()
+ IF(NOT SALOME_LIGHT_ONLY)
+ LIST(APPEND _${PROJECT_NAME}_exposed_targets SalomePyQtGUI)
+ ENDIF()
+ IF(SALOME_USE_VTKVIEWER)
+ LIST(APPEND _${PROJECT_NAME}_exposed_targets SalomePy)
+ ENDIF(SALOME_USE_VTKVIEWER)
+ENDIF(SALOME_USE_PYCONSOLE)
+
+# CORBA specific targets:
+IF(NOT SALOME_LIGHT_ONLY)
+ LIST(APPEND _${PROJECT_NAME}_exposed_targets
+ SalomeIDLGUI SalomeSession SalomeApp SalomeGuiHelpers SalomeTreeData ToolsGUI)
+ENDIF(NOT SALOME_LIGHT_ONLY)
+
# Add all targets to the build-tree export set
EXPORT(TARGETS ${_${PROJECT_NAME}_exposed_targets}
FILE ${PROJECT_BINARY_DIR}/${PROJECT_NAME}Targets.cmake)
# Create the configuration files:
# - in the build tree:
-# Ensure the variables are always defined for the configure:
+# Ensure the variables are always defined for the configure:
+SET(KERNEL_ROOT_DIR "${KERNEL_ROOT_DIR}")
SET(SIP_ROOT_DIR "${SIP_ROOT_DIR}")
SET(QT4_ROOT_DIR "${QT4_ROOT_DIR}")
SET(PYQT4_ROOT_DIR "${PYQT4_ROOT_DIR}")
SET(QWT_ROOT_DIR "${QWT_ROOT_DIR}")
SET(CONF_INCLUDE_DIRS "${PROJECT_SOURCE_DIR}/include" "${PROJECT_BINARY_DIR}/include")
-CONFIGURE_PACKAGE_CONFIG_FILE(adm_local/cmake_files/${PROJECT_NAME}Config.cmake.in
+
+# Build variables that will be expanded when configuring Salome<MODULE>Config.cmake:
+SALOME_CONFIGURE_PREPARE(CAS OpenGL PyQt4 Qt4 Qwt SIP VTK)
+
+CONFIGURE_PACKAGE_CONFIG_FILE(${PROJECT_NAME}Config.cmake.in
${PROJECT_BINARY_DIR}/${PROJECT_NAME}Config.cmake
INSTALL_DESTINATION "${SALOME_INSTALL_CMAKE_LOCAL}"
PATH_VARS CONF_INCLUDE_DIRS SALOME_INSTALL_CMAKE_LOCAL CMAKE_INSTALL_PREFIX
