- std::ostringstream ret;
- reprZipStream(ret);
- return ret.str();
-}
-
-/*!
- * This method is close to repr method except that when \a this has more than 1000 tuples, all tuples are not
- * printed out to avoid to consume too much space in interpretor.
- * \sa repr
- */
-std::string DataArrayInt::reprNotTooLong() const
-{
- std::ostringstream ret;
- reprNotTooLongStream(ret);
- return ret.str();
-}
-
-void DataArrayInt::writeVTK(std::ostream& ofs, int indent, const std::string& type, const std::string& nameInFile, DataArrayByte *byteArr) const
-{
- static const char SPACE[4]={' ',' ',' ',' '};
- checkAllocated();
- std::string idt(indent,' ');
- ofs << idt << "<DataArray type=\"" << type << "\" Name=\"" << nameInFile << "\" NumberOfComponents=\"" << getNumberOfComponents() << "\"";
- if(byteArr)
- {
- ofs << " format=\"appended\" offset=\"" << byteArr->getNumberOfTuples() << "\">";
- if(std::string(type)=="Int32")
- {
- const char *data(reinterpret_cast<const char *>(begin()));
- std::size_t sz(getNbOfElems()*sizeof(int));
- byteArr->insertAtTheEnd(data,data+sz);
- byteArr->insertAtTheEnd(SPACE,SPACE+4);
- }
- else if(std::string(type)=="Int8")
- {
- INTERP_KERNEL::AutoPtr<char> tmp(new char[getNbOfElems()]);
- std::copy(begin(),end(),(char *)tmp);
- byteArr->insertAtTheEnd((char *)tmp,(char *)tmp+getNbOfElems());
- byteArr->insertAtTheEnd(SPACE,SPACE+4);
- }
- else if(std::string(type)=="UInt8")
- {
- INTERP_KERNEL::AutoPtr<unsigned char> tmp(new unsigned char[getNbOfElems()]);
- std::copy(begin(),end(),(unsigned char *)tmp);
- byteArr->insertAtTheEnd((unsigned char *)tmp,(unsigned char *)tmp+getNbOfElems());
- byteArr->insertAtTheEnd(SPACE,SPACE+4);
- }
- else
- throw INTERP_KERNEL::Exception("DataArrayInt::writeVTK : Only Int32, Int8 and UInt8 supported !");
- }
- else
- {
- ofs << " RangeMin=\"" << getMinValueInArray() << "\" RangeMax=\"" << getMaxValueInArray() << "\" format=\"ascii\">\n" << idt;
- std::copy(begin(),end(),std::ostream_iterator<int>(ofs," "));
- }
- ofs << std::endl << idt << "</DataArray>\n";
-}
-
-void DataArrayInt::reprStream(std::ostream& stream) const
-{
- stream << "Name of int array : \"" << _name << "\"\n";
- reprWithoutNameStream(stream);
-}
-
-void DataArrayInt::reprZipStream(std::ostream& stream) const
-{
- stream << "Name of int array : \"" << _name << "\"\n";
- reprZipWithoutNameStream(stream);
-}
-
-void DataArrayInt::reprNotTooLongStream(std::ostream& stream) const
-{
- stream << "Name of int array : \"" << _name << "\"\n";
- reprNotTooLongWithoutNameStream(stream);
-}
-
-void DataArrayInt::reprWithoutNameStream(std::ostream& stream) const
-{
- DataArray::reprWithoutNameStream(stream);
- _mem.repr(getNumberOfComponents(),stream);
-}
-
-void DataArrayInt::reprZipWithoutNameStream(std::ostream& stream) const
-{
- DataArray::reprWithoutNameStream(stream);
- _mem.reprZip(getNumberOfComponents(),stream);
-}
-
-void DataArrayInt::reprNotTooLongWithoutNameStream(std::ostream& stream) const
-{
- DataArray::reprWithoutNameStream(stream);
- stream.precision(17);
- _mem.reprNotTooLong(getNumberOfComponents(),stream);
-}
-
-void DataArrayInt::reprCppStream(const std::string& varName, std::ostream& stream) const
-{
- int nbTuples=getNumberOfTuples(),nbComp=getNumberOfComponents();
- const int *data=getConstPointer();
- stream << "DataArrayInt *" << varName << "=DataArrayInt::New();" << std::endl;
- if(nbTuples*nbComp>=1)
- {
- stream << "const int " << varName << "Data[" << nbTuples*nbComp << "]={";
- std::copy(data,data+nbTuples*nbComp-1,std::ostream_iterator<int>(stream,","));
- stream << data[nbTuples*nbComp-1] << "};" << std::endl;
- stream << varName << "->useArray(" << varName << "Data,false,CPP_DEALLOC," << nbTuples << "," << nbComp << ");" << std::endl;
- }
- else
- stream << varName << "->alloc(" << nbTuples << "," << nbComp << ");" << std::endl;
- stream << varName << "->setName(\"" << getName() << "\");" << std::endl;
-}
-
-/*!
- * Method that gives a quick overvien of \a this for python.
- */
-void DataArrayInt::reprQuickOverview(std::ostream& stream) const
-{
- static const std::size_t MAX_NB_OF_BYTE_IN_REPR=300;
- stream << "DataArrayInt C++ instance at " << this << ". ";
- if(isAllocated())
- {
- int nbOfCompo=(int)_info_on_compo.size();
- if(nbOfCompo>=1)
- {
- int nbOfTuples=getNumberOfTuples();
- stream << "Number of tuples : " << nbOfTuples << ". Number of components : " << nbOfCompo << "." << std::endl;
- reprQuickOverviewData(stream,MAX_NB_OF_BYTE_IN_REPR);
- }
- else
- stream << "Number of components : 0.";
- }
- else
- stream << "*** No data allocated ****";
-}
-
-void DataArrayInt::reprQuickOverviewData(std::ostream& stream, std::size_t maxNbOfByteInRepr) const
-{
- const int *data=begin();
- int nbOfTuples=getNumberOfTuples();
- int nbOfCompo=(int)_info_on_compo.size();
- std::ostringstream oss2; oss2 << "[";
- std::string oss2Str(oss2.str());
- bool isFinished=true;
- for(int i=0;i<nbOfTuples && isFinished;i++)
- {
- if(nbOfCompo>1)
- {
- oss2 << "(";
- for(int j=0;j<nbOfCompo;j++,data++)
- {
- oss2 << *data;
- if(j!=nbOfCompo-1) oss2 << ", ";
- }
- oss2 << ")";
- }
- else
- oss2 << *data++;
- if(i!=nbOfTuples-1) oss2 << ", ";
- std::string oss3Str(oss2.str());
- if(oss3Str.length()<maxNbOfByteInRepr)
- oss2Str=oss3Str;
- else
- isFinished=false;
- }
- stream << oss2Str;
- if(!isFinished)
- stream << "... ";
- stream << "]";
-}
-
-/*!
- * Modifies in place \a this one-dimensional array so that each value \a v = \a indArrBg[ \a v ],
- * i.e. a current value is used as in index to get a new value from \a indArrBg.
- * \param [in] indArrBg - pointer to the first element of array of new values to assign
- * to \a this array.
- * \param [in] indArrEnd - specifies the end of the array \a indArrBg, so that
- * the last value of \a indArrBg is \a indArrEnd[ -1 ].
- * \throw If \a this->getNumberOfComponents() != 1
- * \throw If any value of \a this can't be used as a valid index for
- * [\a indArrBg, \a indArrEnd).
- *
- * \sa replaceOneValByInThis
- */
-void DataArrayInt::transformWithIndArr(const int *indArrBg, const int *indArrEnd)
-{
- checkAllocated();
- if(getNumberOfComponents()!=1)
- throw INTERP_KERNEL::Exception("Call transformWithIndArr method on DataArrayInt with only one component, you can call 'rearrange' method before !");
- int nbElemsIn((int)std::distance(indArrBg,indArrEnd)),nbOfTuples(getNumberOfTuples()),*pt(getPointer());
- for(int i=0;i<nbOfTuples;i++,pt++)
- {
- if(*pt>=0 && *pt<nbElemsIn)
- *pt=indArrBg[*pt];
- else
- {
- std::ostringstream oss; oss << "DataArrayInt::transformWithIndArr : error on tuple #" << i << " of this value is " << *pt << ", should be in [0," << nbElemsIn << ") !";
- throw INTERP_KERNEL::Exception(oss.str().c_str());
- }
- }
- declareAsNew();
-}
-
-/*!
- * Modifies in place \a this one-dimensional array like this : each id in \a this so that this[id] equal to \a valToBeReplaced will be replaced at the same place by \a replacedBy.
- *
- * \param [in] valToBeReplaced - the value in \a this to be replaced.
- * \param [in] replacedBy - the value taken by each tuple previously equal to \a valToBeReplaced.
- *
- * \sa DataArrayInt::transformWithIndArr
- */
-void DataArrayInt::replaceOneValByInThis(int valToBeReplaced, int replacedBy)
-{
- checkAllocated();
- if(getNumberOfComponents()!=1)
- throw INTERP_KERNEL::Exception("Call replaceOneValByInThis method on DataArrayInt with only one component, you can call 'rearrange' method before !");
- if(valToBeReplaced==replacedBy)
- return ;
- int nbOfTuples(getNumberOfTuples()),*pt(getPointer());
- for(int i=0;i<nbOfTuples;i++,pt++)
- {
- if(*pt==valToBeReplaced)
- *pt=replacedBy;
- }
-}
-
-/*!
- * Computes distribution of values of \a this one-dimensional array between given value
- * ranges (casts). This method is typically useful for entity number spliting by types,
- * for example.
- * \warning The values contained in \a arrBg should be sorted ascendently. No
- * check of this is be done. If not, the result is not warranted.
- * \param [in] arrBg - the array of ascending values defining the value ranges. The i-th
- * value of \a arrBg (\a arrBg[ i ]) gives the lowest value of the i-th range,
- * and the greatest value of the i-th range equals to \a arrBg[ i+1 ] - 1. \a
- * arrBg containing \a n values defines \a n-1 ranges. The last value of \a arrBg
- * should be more than every value in \a this array.
- * \param [in] arrEnd - specifies the end of the array \a arrBg, so that
- * the last value of \a arrBg is \a arrEnd[ -1 ].
- * \param [out] castArr - a new instance of DataArrayInt, of same size as \a this array
- * (same number of tuples and components), the caller is to delete
- * using decrRef() as it is no more needed.
- * This array contains indices of ranges for every value of \a this array. I.e.
- * the i-th value of \a castArr gives the index of range the i-th value of \a this
- * belongs to. Or, in other words, this parameter contains for each tuple in \a
- * this in which cast it holds.
- * \param [out] rankInsideCast - a new instance of DataArrayInt, of same size as \a this
- * array, the caller is to delete using decrRef() as it is no more needed.
- * This array contains ranks of values of \a this array within ranges
- * they belongs to. I.e. the i-th value of \a rankInsideCast gives the rank of
- * the i-th value of \a this array within the \a castArr[ i ]-th range, to which
- * the i-th value of \a this belongs to. Or, in other words, this param contains
- * for each tuple its rank inside its cast. The rank is computed as difference
- * between the value and the lowest value of range.
- * \param [out] castsPresent - a new instance of DataArrayInt, containing indices of
- * ranges (casts) to which at least one value of \a this array belongs.
- * Or, in other words, this param contains the casts that \a this contains.
- * The caller is to delete this array using decrRef() as it is no more needed.
- *
- * \b Example: If \a this contains [6,5,0,3,2,7,8,1,4] and \a arrBg contains [0,4,9] then
- * the output of this method will be :
- * - \a castArr : [1,1,0,0,0,1,1,0,1]
- * - \a rankInsideCast: [2,1,0,3,2,3,4,1,0]
- * - \a castsPresent : [0,1]
- *
- * I.e. values of \a this array belong to 2 ranges: #0 and #1. Value 6 belongs to the
- * range #1 and its rank within this range is 2; etc.
- *
- * \throw If \a this->getNumberOfComponents() != 1.
- * \throw If \a arrEnd - arrBg < 2.
- * \throw If any value of \a this is not less than \a arrEnd[-1].
- */
-void DataArrayInt::splitByValueRange(const int *arrBg, const int *arrEnd,
- DataArrayInt *& castArr, DataArrayInt *& rankInsideCast, DataArrayInt *& castsPresent) const
-{
- checkAllocated();
- if(getNumberOfComponents()!=1)
- throw INTERP_KERNEL::Exception("Call splitByValueRange method on DataArrayInt with only one component, you can call 'rearrange' method before !");
- int nbOfTuples=getNumberOfTuples();
- std::size_t nbOfCast=std::distance(arrBg,arrEnd);
- if(nbOfCast<2)
- throw INTERP_KERNEL::Exception("DataArrayInt::splitByValueRange : The input array giving the cast range values should be of size >=2 !");
- nbOfCast--;
- const int *work=getConstPointer();
- typedef std::reverse_iterator<const int *> rintstart;
- rintstart bg(arrEnd);//OK no problem because size of 'arr' is greater or equal 2
- rintstart end2(arrBg);
- MEDCouplingAutoRefCountObjectPtr<DataArrayInt> ret1=DataArrayInt::New();
- MEDCouplingAutoRefCountObjectPtr<DataArrayInt> ret2=DataArrayInt::New();
- MEDCouplingAutoRefCountObjectPtr<DataArrayInt> ret3=DataArrayInt::New();
- ret1->alloc(nbOfTuples,1);
- ret2->alloc(nbOfTuples,1);
- int *ret1Ptr=ret1->getPointer();
- int *ret2Ptr=ret2->getPointer();
- std::set<std::size_t> castsDetected;
- for(int i=0;i<nbOfTuples;i++)
- {
- rintstart res=std::find_if(bg,end2,std::bind2nd(std::less_equal<int>(), work[i]));
- std::size_t pos=std::distance(bg,res);
- std::size_t pos2=nbOfCast-pos;
- if(pos2<nbOfCast)
- {
- ret1Ptr[i]=(int)pos2;
- ret2Ptr[i]=work[i]-arrBg[pos2];
- castsDetected.insert(pos2);
- }
- else
- {
- std::ostringstream oss; oss << "DataArrayInt::splitByValueRange : At rank #" << i << " the value is " << work[i] << " should be in [0," << *bg << ") !";
- throw INTERP_KERNEL::Exception(oss.str().c_str());
- }
- }
- ret3->alloc((int)castsDetected.size(),1);
- std::copy(castsDetected.begin(),castsDetected.end(),ret3->getPointer());
- castArr=ret1.retn();
- rankInsideCast=ret2.retn();
- castsPresent=ret3.retn();
-}
-
-/*!
- * This method look at \a this if it can be considered as a range defined by the 3-tuple ( \a strt , \a sttoopp , \a stteepp ).
- * If false is returned the tuple must be ignored. If true is returned \a this can be considered by a range( \a strt , \a sttoopp , \a stteepp ).
- * This method works only if \a this is allocated and single component. If not an exception will be thrown.
- *
- * \param [out] strt - the start of the range (included) if true is returned.
- * \param [out] sttoopp - the end of the range (not included) if true is returned.
- * \param [out] stteepp - the step of the range if true is returned.
- * \return the verdict of the check.
- *
- * \sa DataArray::GetNumberOfItemGivenBES
- */
-bool DataArrayInt::isRange(int& strt, int& sttoopp, int& stteepp) const
-{
- checkAllocated();
- if(getNumberOfComponents()!=1)
- throw INTERP_KERNEL::Exception("DataArrayInt::isRange : this must be single component array !");
- int nbTuples(getNumberOfTuples());
- if(nbTuples==0)
- { strt=0; sttoopp=0; stteepp=1; return true; }
- const int *pt(begin());
- strt=*pt;
- if(nbTuples==1)
- { sttoopp=strt+1; stteepp=1; return true; }
- strt=*pt; sttoopp=pt[nbTuples-1];
- if(strt==sttoopp)
- return false;
- if(sttoopp>strt)
- {
- sttoopp++;
- int a(sttoopp-1-strt),tmp(strt);
- if(a%(nbTuples-1)!=0)
- return false;
- stteepp=a/(nbTuples-1);
- for(int i=0;i<nbTuples;i++,tmp+=stteepp)
- if(pt[i]!=tmp)
- return false;
- return true;
- }
- else
- {
- sttoopp--;
- int a(strt-sttoopp-1),tmp(strt);
- if(a%(nbTuples-1)!=0)
- return false;
- stteepp=-(a/(nbTuples-1));
- for(int i=0;i<nbTuples;i++,tmp+=stteepp)
- if(pt[i]!=tmp)
- return false;
- return true;
- }
-}
-
-/*!
- * Creates a one-dimensional DataArrayInt (\a res) whose contents are computed from
- * values of \a this (\a a) and the given (\a indArr) arrays as follows:
- * \a res[ \a indArr[ \a a[ i ]]] = i. I.e. for each value in place i \a v = \a a[ i ],
- * new value in place \a indArr[ \a v ] is i.
- * \param [in] indArrBg - the array holding indices within the result array to assign
- * indices of values of \a this array pointing to values of \a indArrBg.
- * \param [in] indArrEnd - specifies the end of the array \a indArrBg, so that
- * the last value of \a indArrBg is \a indArrEnd[ -1 ].
- * \return DataArrayInt * - the new instance of DataArrayInt.
- * The caller is to delete this result array using decrRef() as it is no more
- * needed.
- * \throw If \a this->getNumberOfComponents() != 1.
- * \throw If any value of \a this array is not a valid index for \a indArrBg array.
- * \throw If any value of \a indArrBg is not a valid index for \a this array.
- */
-DataArrayInt *DataArrayInt::transformWithIndArrR(const int *indArrBg, const int *indArrEnd) const
-{
- checkAllocated();
- if(getNumberOfComponents()!=1)
- throw INTERP_KERNEL::Exception("Call transformWithIndArrR method on DataArrayInt with only one component, you can call 'rearrange' method before !");
- int nbElemsIn=(int)std::distance(indArrBg,indArrEnd);
- int nbOfTuples=getNumberOfTuples();
- const int *pt=getConstPointer();
- MEDCouplingAutoRefCountObjectPtr<DataArrayInt> ret=DataArrayInt::New();
- ret->alloc(nbOfTuples,1);
- ret->fillWithValue(-1);
- int *tmp=ret->getPointer();
- for(int i=0;i<nbOfTuples;i++,pt++)
- {
- if(*pt>=0 && *pt<nbElemsIn)
- {
- int pos=indArrBg[*pt];
- if(pos>=0 && pos<nbOfTuples)
- tmp[pos]=i;
- else
- {
- std::ostringstream oss; oss << "DataArrayInt::transformWithIndArrR : error on tuple #" << i << " value of new pos is " << pos << " ( indArrBg[" << *pt << "]) ! Should be in [0," << nbOfTuples << ") !";
- throw INTERP_KERNEL::Exception(oss.str().c_str());
- }
- }
- else
- {
- std::ostringstream oss; oss << "DataArrayInt::transformWithIndArrR : error on tuple #" << i << " value is " << *pt << " and indirectionnal array as a size equal to " << nbElemsIn << " !";
- throw INTERP_KERNEL::Exception(oss.str().c_str());
- }
- }
- return ret.retn();
-}
-
-/*!
- * Creates a one-dimensional DataArrayInt of given length, whose contents are computed
- * from values of \a this array, which is supposed to contain a renumbering map in
- * "Old to New" mode. The result array contains a renumbering map in "New to Old" mode.
- * To know how to use the renumbering maps see \ref numbering.
- * \param [in] newNbOfElem - the number of tuples in the result array.
- * \return DataArrayInt * - the new instance of DataArrayInt.
- * The caller is to delete this result array using decrRef() as it is no more
- * needed.
- *
- * \if ENABLE_EXAMPLES
- * \ref cpp_mcdataarrayint_invertarrayo2n2n2o "Here is a C++ example".<br>
- * \ref py_mcdataarrayint_invertarrayo2n2n2o "Here is a Python example".
- * \endif
- */
-DataArrayInt *DataArrayInt::invertArrayO2N2N2O(int newNbOfElem) const
-{
- MEDCouplingAutoRefCountObjectPtr<DataArrayInt> ret=DataArrayInt::New();
- ret->alloc(newNbOfElem,1);
- int nbOfOldNodes=getNumberOfTuples();
- const int *old2New=getConstPointer();
- int *pt=ret->getPointer();
- for(int i=0;i!=nbOfOldNodes;i++)
- {
- int newp(old2New[i]);
- if(newp!=-1)
- {
- if(newp>=0 && newp<newNbOfElem)
- pt[newp]=i;
- else
- {
- std::ostringstream oss; oss << "DataArrayInt::invertArrayO2N2N2O : At place #" << i << " the newplace is " << newp << " must be in [0," << newNbOfElem << ") !";
- throw INTERP_KERNEL::Exception(oss.str().c_str());
- }
- }
- }
- return ret.retn();
-}
-
-/*!
- * This method is similar to DataArrayInt::invertArrayO2N2N2O except that
- * Example : If \a this contains [0,1,2,0,3,4,5,4,6,4] this method will return [0,1,2,4,5,6,8] whereas DataArrayInt::invertArrayO2N2N2O returns [3,1,2,4,9,6,8]
- */
-DataArrayInt *DataArrayInt::invertArrayO2N2N2OBis(int newNbOfElem) const
-{
- MEDCouplingAutoRefCountObjectPtr<DataArrayInt> ret=DataArrayInt::New();
- ret->alloc(newNbOfElem,1);
- int nbOfOldNodes=getNumberOfTuples();
- const int *old2New=getConstPointer();
- int *pt=ret->getPointer();
- for(int i=nbOfOldNodes-1;i>=0;i--)
- {
- int newp(old2New[i]);
- if(newp!=-1)
- {
- if(newp>=0 && newp<newNbOfElem)
- pt[newp]=i;
- else
- {
- std::ostringstream oss; oss << "DataArrayInt::invertArrayO2N2N2OBis : At place #" << i << " the newplace is " << newp << " must be in [0," << newNbOfElem << ") !";
- throw INTERP_KERNEL::Exception(oss.str().c_str());
- }
- }
- }
- return ret.retn();
-}
-
-/*!
- * Creates a one-dimensional DataArrayInt of given length, whose contents are computed
- * from values of \a this array, which is supposed to contain a renumbering map in
- * "New to Old" mode. The result array contains a renumbering map in "Old to New" mode.
- * To know how to use the renumbering maps see \ref numbering.
- * \param [in] newNbOfElem - the number of tuples in the result array.
- * \return DataArrayInt * - the new instance of DataArrayInt.
- * The caller is to delete this result array using decrRef() as it is no more
- * needed.
- *
- * \if ENABLE_EXAMPLES
- * \ref cpp_mcdataarrayint_invertarrayn2o2o2n "Here is a C++ example".
- *
- * \ref py_mcdataarrayint_invertarrayn2o2o2n "Here is a Python example".
- * \endif
- */
-DataArrayInt *DataArrayInt::invertArrayN2O2O2N(int oldNbOfElem) const
-{
- checkAllocated();
- MEDCouplingAutoRefCountObjectPtr<DataArrayInt> ret=DataArrayInt::New();
- ret->alloc(oldNbOfElem,1);
- const int *new2Old=getConstPointer();
- int *pt=ret->getPointer();
- std::fill(pt,pt+oldNbOfElem,-1);
- int nbOfNewElems=getNumberOfTuples();
- for(int i=0;i<nbOfNewElems;i++)
- {
- int v(new2Old[i]);
- if(v>=0 && v<oldNbOfElem)
- pt[v]=i;
- else
- {
- std::ostringstream oss; oss << "DataArrayInt::invertArrayN2O2O2N : in new id #" << i << " old value is " << v << " expected to be in [0," << oldNbOfElem << ") !";
- throw INTERP_KERNEL::Exception(oss.str().c_str());
- }
- }
- return ret.retn();
-}
-
-/*!
- * Equivalent to DataArrayInt::isEqual except that if false the reason of
- * mismatch is given.
- *
- * \param [in] other the instance to be compared with \a this
- * \param [out] reason In case of inequality returns the reason.
- * \sa DataArrayInt::isEqual
- */
-bool DataArrayInt::isEqualIfNotWhy(const DataArrayInt& other, std::string& reason) const
-{
- if(!areInfoEqualsIfNotWhy(other,reason))
- return false;
- return _mem.isEqual(other._mem,0,reason);
-}
-
-/*!
- * Checks if \a this and another DataArrayInt are fully equal. For more info see
- * \ref MEDCouplingArrayBasicsCompare.
- * \param [in] other - an instance of DataArrayInt to compare with \a this one.
- * \return bool - \a true if the two arrays are equal, \a false else.
- */
-bool DataArrayInt::isEqual(const DataArrayInt& other) const
-{
- std::string tmp;
- return isEqualIfNotWhy(other,tmp);
-}
-
-/*!
- * Checks if values of \a this and another DataArrayInt are equal. For more info see
- * \ref MEDCouplingArrayBasicsCompare.
- * \param [in] other - an instance of DataArrayInt to compare with \a this one.
- * \return bool - \a true if the values of two arrays are equal, \a false else.
- */
-bool DataArrayInt::isEqualWithoutConsideringStr(const DataArrayInt& other) const
-{
- std::string tmp;
- return _mem.isEqual(other._mem,0,tmp);
-}
-
-/*!
- * Checks if values of \a this and another DataArrayInt are equal. Comparison is
- * performed on sorted value sequences.
- * For more info see\ref MEDCouplingArrayBasicsCompare.
- * \param [in] other - an instance of DataArrayInt to compare with \a this one.
- * \return bool - \a true if the sorted values of two arrays are equal, \a false else.
- */
-bool DataArrayInt::isEqualWithoutConsideringStrAndOrder(const DataArrayInt& other) const
-{
- MEDCouplingAutoRefCountObjectPtr<DataArrayInt> a=deepCpy();
- MEDCouplingAutoRefCountObjectPtr<DataArrayInt> b=other.deepCpy();
- a->sort();
- b->sort();
- return a->isEqualWithoutConsideringStr(*b);
-}
-
-/*!
- * This method compares content of input vector \a v and \a this.
- * If for each id in \a this v[id]==True and for all other ids id2 not in \a this v[id2]==False, true is returned.
- * For performance reasons \a this is expected to be sorted ascendingly. If not an exception will be thrown.
- *
- * \param [in] v - the vector of 'flags' to be compared with \a this.
- *
- * \throw If \a this is not sorted ascendingly.
- * \throw If \a this has not exactly one component.
- * \throw If \a this is not allocated.
- */
-bool DataArrayInt::isFittingWith(const std::vector<bool>& v) const
-{
- checkAllocated();
- if(getNumberOfComponents()!=1)
- throw INTERP_KERNEL::Exception("DataArrayInt::isFittingWith : number of components of this should be equal to one !");
- const int *w(begin()),*end2(end());
- int refVal=-std::numeric_limits<int>::max();
- int i=0;
- std::vector<bool>::const_iterator it(v.begin());
- for(;it!=v.end();it++,i++)
- {
- if(*it)
- {
- if(w!=end2)
- {
- if(*w++==i)
- {
- if(i>refVal)
- refVal=i;
- else
- {
- std::ostringstream oss; oss << "DataArrayInt::isFittingWith : At pos #" << std::distance(begin(),w-1) << " this is not sorted ascendingly !";
- throw INTERP_KERNEL::Exception(oss.str().c_str());
- }
- }
- else
- return false;
- }
- else
- return false;
- }
- }
- return w==end2;
-}
-
-/*!
- * This method assumes that \a this has one component and is allocated. This method scans all tuples in \a this and for all tuple equal to \a val
- * put True to the corresponding entry in \a vec.
- * \a vec is expected to be with the same size than the number of tuples of \a this.
- */
-void DataArrayInt::switchOnTupleEqualTo(int val, std::vector<bool>& vec) const
-{
- checkAllocated();
- if(getNumberOfComponents()!=1)
- throw INTERP_KERNEL::Exception("DataArrayInt::switchOnTupleEqualTo : number of components of this should be equal to one !");
- int nbOfTuples(getNumberOfTuples());
- if(nbOfTuples!=(int)vec.size())
- throw INTERP_KERNEL::Exception("DataArrayInt::switchOnTupleEqualTo : number of tuples of this should be equal to size of input vector of bool !");
- const int *pt(begin());
- for(int i=0;i<nbOfTuples;i++)
- if(pt[i]==val)
- vec[i]=true;
-}
-
-/*!
- * Sorts values of the array.
- * \param [in] asc - \a true means ascending order, \a false, descending.
- * \throw If \a this is not allocated.
- * \throw If \a this->getNumberOfComponents() != 1.
- */
-void DataArrayInt::sort(bool asc)
-{
- checkAllocated();
- if(getNumberOfComponents()!=1)
- throw INTERP_KERNEL::Exception("DataArrayInt::sort : only supported with 'this' array with ONE component !");
- _mem.sort(asc);
- declareAsNew();
-}
-
-/*!
- * Computes for each tuple the sum of number of components values in the tuple and return it.
- *
- * \return DataArrayInt * - the new instance of DataArrayInt containing the
- * same number of tuples as \a this array and one component.
- * The caller is to delete this result array using decrRef() as it is no more
- * needed.
- * \throw If \a this is not allocated.
- */
-DataArrayInt *DataArrayInt::sumPerTuple() const
-{
- checkAllocated();
- int nbOfComp(getNumberOfComponents()),nbOfTuple(getNumberOfTuples());
- MEDCouplingAutoRefCountObjectPtr<DataArrayInt> ret(DataArrayInt::New());
- ret->alloc(nbOfTuple,1);
- const int *src(getConstPointer());
- int *dest(ret->getPointer());
- for(int i=0;i<nbOfTuple;i++,dest++,src+=nbOfComp)
- *dest=std::accumulate(src,src+nbOfComp,0);
- return ret.retn();
-}
-
-/*!
- * Reverse the array values.
- * \throw If \a this->getNumberOfComponents() < 1.
- * \throw If \a this is not allocated.
- */
-void DataArrayInt::reverse()
-{
- checkAllocated();
- _mem.reverse(getNumberOfComponents());
- declareAsNew();
-}
-
-/*!
- * Checks that \a this array is consistently **increasing** or **decreasing** in value.
- * If not an exception is thrown.
- * \param [in] increasing - if \a true, the array values should be increasing.
- * \throw If sequence of values is not strictly monotonic in agreement with \a
- * increasing arg.
- * \throw If \a this->getNumberOfComponents() != 1.
- * \throw If \a this is not allocated.
- */
-void DataArrayInt::checkMonotonic(bool increasing) const
-{
- if(!isMonotonic(increasing))
- {
- if (increasing)
- throw INTERP_KERNEL::Exception("DataArrayInt::checkMonotonic : 'this' is not INCREASING monotonic !");
- else
- throw INTERP_KERNEL::Exception("DataArrayInt::checkMonotonic : 'this' is not DECREASING monotonic !");
- }
-}
-
-/*!
- * Checks that \a this array is consistently **increasing** or **decreasing** in value.
- * \param [in] increasing - if \a true, array values should be increasing.
- * \return bool - \a true if values change in accordance with \a increasing arg.
- * \throw If \a this->getNumberOfComponents() != 1.
- * \throw If \a this is not allocated.
- */
-bool DataArrayInt::isMonotonic(bool increasing) const
-{
- checkAllocated();
- if(getNumberOfComponents()!=1)
- throw INTERP_KERNEL::Exception("DataArrayInt::isMonotonic : only supported with 'this' array with ONE component !");
- int nbOfElements=getNumberOfTuples();
- const int *ptr=getConstPointer();
- if(nbOfElements==0)
- return true;
- int ref=ptr[0];
- if(increasing)
- {
- for(int i=1;i<nbOfElements;i++)
- {
- if(ptr[i]>=ref)
- ref=ptr[i];
- else
- return false;
- }
- }
- else
- {
- for(int i=1;i<nbOfElements;i++)
- {
- if(ptr[i]<=ref)
- ref=ptr[i];
- else
- return false;
- }
- }
- return true;
-}
-
-/*!
- * This method check that array consistently INCREASING or DECREASING in value.
- */
-bool DataArrayInt::isStrictlyMonotonic(bool increasing) const
-{
- checkAllocated();
- if(getNumberOfComponents()!=1)
- throw INTERP_KERNEL::Exception("DataArrayInt::isStrictlyMonotonic : only supported with 'this' array with ONE component !");
- int nbOfElements=getNumberOfTuples();
- const int *ptr=getConstPointer();
- if(nbOfElements==0)
- return true;
- int ref=ptr[0];
- if(increasing)
- {
- for(int i=1;i<nbOfElements;i++)
- {
- if(ptr[i]>ref)
- ref=ptr[i];
- else
- return false;
- }
- }
- else
- {
- for(int i=1;i<nbOfElements;i++)
- {
- if(ptr[i]<ref)
- ref=ptr[i];
- else
- return false;
- }
- }
- return true;
-}
-
-/*!
- * This method check that array consistently INCREASING or DECREASING in value.
- */
-void DataArrayInt::checkStrictlyMonotonic(bool increasing) const
-{
- if(!isStrictlyMonotonic(increasing))
- {
- if (increasing)
- throw INTERP_KERNEL::Exception("DataArrayInt::checkStrictlyMonotonic : 'this' is not strictly INCREASING monotonic !");
- else
- throw INTERP_KERNEL::Exception("DataArrayInt::checkStrictlyMonotonic : 'this' is not strictly DECREASING monotonic !");
- }
-}
-
-/*!
- * Creates a new one-dimensional DataArrayInt of the same size as \a this and a given
- * one-dimensional arrays that must be of the same length. The result array describes
- * correspondence between \a this and \a other arrays, so that
- * <em> other.getIJ(i,0) == this->getIJ(ret->getIJ(i),0)</em>. If such a permutation is
- * not possible because some element in \a other is not in \a this, an exception is thrown.
- * \param [in] other - an array to compute permutation to.
- * \return DataArrayInt * - a new instance of DataArrayInt, which is a permutation array
- * from \a this to \a other. The caller is to delete this array using decrRef() as it is
- * no more needed.
- * \throw If \a this->getNumberOfComponents() != 1.
- * \throw If \a other->getNumberOfComponents() != 1.
- * \throw If \a this->getNumberOfTuples() != \a other->getNumberOfTuples().
- * \throw If \a other includes a value which is not in \a this array.
- *
- * \if ENABLE_EXAMPLES
- * \ref cpp_mcdataarrayint_buildpermutationarr "Here is a C++ example".
- *
- * \ref py_mcdataarrayint_buildpermutationarr "Here is a Python example".
- * \endif
- */
-DataArrayInt *DataArrayInt::buildPermutationArr(const DataArrayInt& other) const
-{
- checkAllocated();
- if(getNumberOfComponents()!=1 || other.getNumberOfComponents()!=1)
- throw INTERP_KERNEL::Exception("DataArrayInt::buildPermutationArr : 'this' and 'other' have to have exactly ONE component !");
- int nbTuple=getNumberOfTuples();
- other.checkAllocated();
- if(nbTuple!=other.getNumberOfTuples())
- throw INTERP_KERNEL::Exception("DataArrayInt::buildPermutationArr : 'this' and 'other' must have the same number of tuple !");
- MEDCouplingAutoRefCountObjectPtr<DataArrayInt> ret=DataArrayInt::New();
- ret->alloc(nbTuple,1);
- ret->fillWithValue(-1);
- const int *pt=getConstPointer();
- std::map<int,int> mm;
- for(int i=0;i<nbTuple;i++)
- mm[pt[i]]=i;
- pt=other.getConstPointer();
- int *retToFill=ret->getPointer();
- for(int i=0;i<nbTuple;i++)
- {
- std::map<int,int>::const_iterator it=mm.find(pt[i]);
- if(it==mm.end())
- {
- std::ostringstream oss; oss << "DataArrayInt::buildPermutationArr : Arrays mismatch : element (" << pt[i] << ") in 'other' not findable in 'this' !";
- throw INTERP_KERNEL::Exception(oss.str().c_str());
- }
- retToFill[i]=(*it).second;
- }
- return ret.retn();
-}
-
-/*!
- * Sets a C array to be used as raw data of \a this. The previously set info
- * of components is retained and re-sized.
- * For more info see \ref MEDCouplingArraySteps1.
- * \param [in] array - the C array to be used as raw data of \a this.
- * \param [in] ownership - if \a true, \a array will be deallocated at destruction of \a this.
- * \param [in] type - specifies how to deallocate \a array. If \a type == ParaMEDMEM::CPP_DEALLOC,
- * \c delete [] \c array; will be called. If \a type == ParaMEDMEM::C_DEALLOC,
- * \c free(\c array ) will be called.
- * \param [in] nbOfTuple - new number of tuples in \a this.
- * \param [in] nbOfCompo - new number of components in \a this.
- */
-void DataArrayInt::useArray(const int *array, bool ownership, DeallocType type, int nbOfTuple, int nbOfCompo)
-{
- _info_on_compo.resize(nbOfCompo);
- _mem.useArray(array,ownership,type,nbOfTuple*nbOfCompo);
- declareAsNew();
-}
-
-void DataArrayInt::useExternalArrayWithRWAccess(const int *array, int nbOfTuple, int nbOfCompo)
-{
- _info_on_compo.resize(nbOfCompo);
- _mem.useExternalArrayWithRWAccess(array,nbOfTuple*nbOfCompo);
- declareAsNew();
-}
-
-/*!
- * Returns a new DataArrayInt holding the same values as \a this array but differently
- * arranged in memory. If \a this array holds 2 components of 3 values:
- * \f$ x_0,x_1,x_2,y_0,y_1,y_2 \f$, then the result array holds these values arranged
- * as follows: \f$ x_0,y_0,x_1,y_1,x_2,y_2 \f$.
- * \warning Do not confuse this method with transpose()!
- * \return DataArrayInt * - the new instance of DataArrayInt that the caller
- * is to delete using decrRef() as it is no more needed.
- * \throw If \a this is not allocated.
- */
-DataArrayInt *DataArrayInt::fromNoInterlace() const
-{
- checkAllocated();
- if(_mem.isNull())
- throw INTERP_KERNEL::Exception("DataArrayInt::fromNoInterlace : Not defined array !");
- int *tab=_mem.fromNoInterlace(getNumberOfComponents());
- DataArrayInt *ret=DataArrayInt::New();
- ret->useArray(tab,true,C_DEALLOC,getNumberOfTuples(),getNumberOfComponents());
- return ret;
-}
-
-/*!
- * Returns a new DataArrayInt holding the same values as \a this array but differently
- * arranged in memory. If \a this array holds 2 components of 3 values:
- * \f$ x_0,y_0,x_1,y_1,x_2,y_2 \f$, then the result array holds these values arranged
- * as follows: \f$ x_0,x_1,x_2,y_0,y_1,y_2 \f$.
- * \warning Do not confuse this method with transpose()!
- * \return DataArrayInt * - the new instance of DataArrayInt that the caller
- * is to delete using decrRef() as it is no more needed.
- * \throw If \a this is not allocated.
- */
-DataArrayInt *DataArrayInt::toNoInterlace() const
-{
- checkAllocated();
- if(_mem.isNull())
- throw INTERP_KERNEL::Exception("DataArrayInt::toNoInterlace : Not defined array !");
- int *tab=_mem.toNoInterlace(getNumberOfComponents());
- DataArrayInt *ret=DataArrayInt::New();
- ret->useArray(tab,true,C_DEALLOC,getNumberOfTuples(),getNumberOfComponents());
- return ret;
-}
-
-/*!
- * Permutes values of \a this array as required by \a old2New array. The values are
- * permuted so that \c new[ \a old2New[ i ]] = \c old[ i ]. Number of tuples remains
- * the same as in \c this one.
- * If a permutation reduction is needed, substr() or selectByTupleId() should be used.
- * For more info on renumbering see \ref numbering.
- * \param [in] old2New - C array of length equal to \a this->getNumberOfTuples()
- * giving a new position for i-th old value.
- */
-void DataArrayInt::renumberInPlace(const int *old2New)
-{
- checkAllocated();
- int nbTuples=getNumberOfTuples();
- int nbOfCompo=getNumberOfComponents();
- int *tmp=new int[nbTuples*nbOfCompo];
- const int *iptr=getConstPointer();
- for(int i=0;i<nbTuples;i++)
- {
- int v=old2New[i];
- if(v>=0 && v<nbTuples)
- std::copy(iptr+nbOfCompo*i,iptr+nbOfCompo*(i+1),tmp+nbOfCompo*v);
- else
- {
- std::ostringstream oss; oss << "DataArrayInt::renumberInPlace : At place #" << i << " value is " << v << " ! Should be in [0," << nbTuples << ") !";
- throw INTERP_KERNEL::Exception(oss.str().c_str());
- }
- }
- std::copy(tmp,tmp+nbTuples*nbOfCompo,getPointer());
- delete [] tmp;
- declareAsNew();
-}
-
-/*!
- * Permutes values of \a this array as required by \a new2Old array. The values are
- * permuted so that \c new[ i ] = \c old[ \a new2Old[ i ]]. Number of tuples remains
- * the same as in \c this one.
- * For more info on renumbering see \ref numbering.
- * \param [in] new2Old - C array of length equal to \a this->getNumberOfTuples()
- * giving a previous position of i-th new value.
- * \return DataArrayInt * - the new instance of DataArrayInt that the caller
- * is to delete using decrRef() as it is no more needed.
- */
-void DataArrayInt::renumberInPlaceR(const int *new2Old)
-{
- checkAllocated();
- int nbTuples=getNumberOfTuples();
- int nbOfCompo=getNumberOfComponents();
- int *tmp=new int[nbTuples*nbOfCompo];
- const int *iptr=getConstPointer();
- for(int i=0;i<nbTuples;i++)
- {
- int v=new2Old[i];
- if(v>=0 && v<nbTuples)
- std::copy(iptr+nbOfCompo*v,iptr+nbOfCompo*(v+1),tmp+nbOfCompo*i);
- else
- {
- std::ostringstream oss; oss << "DataArrayInt::renumberInPlaceR : At place #" << i << " value is " << v << " ! Should be in [0," << nbTuples << ") !";
- throw INTERP_KERNEL::Exception(oss.str().c_str());
- }
- }
- std::copy(tmp,tmp+nbTuples*nbOfCompo,getPointer());
- delete [] tmp;
- declareAsNew();
-}
-
-/*!
- * Returns a copy of \a this array with values permuted as required by \a old2New array.
- * The values are permuted so that \c new[ \a old2New[ i ]] = \c old[ i ].
- * Number of tuples in the result array remains the same as in \c this one.
- * If a permutation reduction is needed, renumberAndReduce() should be used.
- * For more info on renumbering see \ref numbering.
- * \param [in] old2New - C array of length equal to \a this->getNumberOfTuples()
- * giving a new position for i-th old value.
- * \return DataArrayInt * - the new instance of DataArrayInt that the caller
- * is to delete using decrRef() as it is no more needed.
- * \throw If \a this is not allocated.
- */
-DataArrayInt *DataArrayInt::renumber(const int *old2New) const
-{
- checkAllocated();
- int nbTuples=getNumberOfTuples();
- int nbOfCompo=getNumberOfComponents();
- MEDCouplingAutoRefCountObjectPtr<DataArrayInt> ret=DataArrayInt::New();
- ret->alloc(nbTuples,nbOfCompo);
- ret->copyStringInfoFrom(*this);
- const int *iptr=getConstPointer();
- int *optr=ret->getPointer();
- for(int i=0;i<nbTuples;i++)
- std::copy(iptr+nbOfCompo*i,iptr+nbOfCompo*(i+1),optr+nbOfCompo*old2New[i]);
- ret->copyStringInfoFrom(*this);
- return ret.retn();
-}
-
-/*!
- * Returns a copy of \a this array with values permuted as required by \a new2Old array.
- * The values are permuted so that \c new[ i ] = \c old[ \a new2Old[ i ]]. Number of
- * tuples in the result array remains the same as in \c this one.
- * If a permutation reduction is needed, substr() or selectByTupleId() should be used.
- * For more info on renumbering see \ref numbering.
- * \param [in] new2Old - C array of length equal to \a this->getNumberOfTuples()
- * giving a previous position of i-th new value.
- * \return DataArrayInt * - the new instance of DataArrayInt that the caller
- * is to delete using decrRef() as it is no more needed.
- */
-DataArrayInt *DataArrayInt::renumberR(const int *new2Old) const
-{
- checkAllocated();
- int nbTuples=getNumberOfTuples();
- int nbOfCompo=getNumberOfComponents();
- MEDCouplingAutoRefCountObjectPtr<DataArrayInt> ret=DataArrayInt::New();
- ret->alloc(nbTuples,nbOfCompo);
- ret->copyStringInfoFrom(*this);
- const int *iptr=getConstPointer();
- int *optr=ret->getPointer();
- for(int i=0;i<nbTuples;i++)
- std::copy(iptr+nbOfCompo*new2Old[i],iptr+nbOfCompo*(new2Old[i]+1),optr+nbOfCompo*i);
- ret->copyStringInfoFrom(*this);
- return ret.retn();
-}
-
-/*!
- * Returns a shorten and permuted copy of \a this array. The new DataArrayInt is
- * of size \a newNbOfTuple and it's values are permuted as required by \a old2New array.
- * The values are permuted so that \c new[ \a old2New[ i ]] = \c old[ i ] for all
- * \a old2New[ i ] >= 0. In other words every i-th tuple in \a this array, for which
- * \a old2New[ i ] is negative, is missing from the result array.
- * For more info on renumbering see \ref numbering.
- * \param [in] old2New - C array of length equal to \a this->getNumberOfTuples()
- * giving a new position for i-th old tuple and giving negative position for
- * for i-th old tuple that should be omitted.
- * \return DataArrayInt * - the new instance of DataArrayInt that the caller
- * is to delete using decrRef() as it is no more needed.
- */
-DataArrayInt *DataArrayInt::renumberAndReduce(const int *old2New, int newNbOfTuple) const
-{
- checkAllocated();
- int nbTuples=getNumberOfTuples();
- int nbOfCompo=getNumberOfComponents();
- MEDCouplingAutoRefCountObjectPtr<DataArrayInt> ret=DataArrayInt::New();
- ret->alloc(newNbOfTuple,nbOfCompo);
- const int *iptr=getConstPointer();
- int *optr=ret->getPointer();
- for(int i=0;i<nbTuples;i++)
- {
- int w=old2New[i];
- if(w>=0)
- std::copy(iptr+i*nbOfCompo,iptr+(i+1)*nbOfCompo,optr+w*nbOfCompo);
- }
- ret->copyStringInfoFrom(*this);
- return ret.retn();
-}
-
-/*!
- * Returns a shorten and permuted copy of \a this array. The new DataArrayInt is
- * of size \a new2OldEnd - \a new2OldBg and it's values are permuted as required by
- * \a new2OldBg array.
- * The values are permuted so that \c new[ i ] = \c old[ \a new2OldBg[ i ]].
- * This method is equivalent to renumberAndReduce() except that convention in input is
- * \c new2old and \b not \c old2new.
- * For more info on renumbering see \ref numbering.
- * \param [in] new2OldBg - pointer to the beginning of a permutation array that gives a
- * tuple index in \a this array to fill the i-th tuple in the new array.
- * \param [in] new2OldEnd - specifies the end of the permutation array that starts at
- * \a new2OldBg, so that pointer to a tuple index (\a pi) varies as this:
- * \a new2OldBg <= \a pi < \a new2OldEnd.
- * \return DataArrayInt * - the new instance of DataArrayInt that the caller
- * is to delete using decrRef() as it is no more needed.
- */
-DataArrayInt *DataArrayInt::selectByTupleId(const int *new2OldBg, const int *new2OldEnd) const
-{
- checkAllocated();
- MEDCouplingAutoRefCountObjectPtr<DataArrayInt> ret=DataArrayInt::New();
- int nbComp=getNumberOfComponents();
- ret->alloc((int)std::distance(new2OldBg,new2OldEnd),nbComp);
- ret->copyStringInfoFrom(*this);
- int *pt=ret->getPointer();
- const int *srcPt=getConstPointer();
- int i=0;
- for(const int *w=new2OldBg;w!=new2OldEnd;w++,i++)
- std::copy(srcPt+(*w)*nbComp,srcPt+((*w)+1)*nbComp,pt+i*nbComp);
- ret->copyStringInfoFrom(*this);
- return ret.retn();
-}
-
-/*!
- * Returns a shorten and permuted copy of \a this array. The new DataArrayInt is
- * of size \a new2OldEnd - \a new2OldBg and it's values are permuted as required by
- * \a new2OldBg array.
- * The values are permuted so that \c new[ i ] = \c old[ \a new2OldBg[ i ]].
- * This method is equivalent to renumberAndReduce() except that convention in input is
- * \c new2old and \b not \c old2new.
- * This method is equivalent to selectByTupleId() except that it prevents coping data
- * from behind the end of \a this array.
- * For more info on renumbering see \ref numbering.
- * \param [in] new2OldBg - pointer to the beginning of a permutation array that gives a
- * tuple index in \a this array to fill the i-th tuple in the new array.
- * \param [in] new2OldEnd - specifies the end of the permutation array that starts at
- * \a new2OldBg, so that pointer to a tuple index (\a pi) varies as this:
- * \a new2OldBg <= \a pi < \a new2OldEnd.
- * \return DataArrayInt * - the new instance of DataArrayInt that the caller
- * is to delete using decrRef() as it is no more needed.
- * \throw If \a new2OldEnd - \a new2OldBg > \a this->getNumberOfTuples().
- */
-DataArrayInt *DataArrayInt::selectByTupleIdSafe(const int *new2OldBg, const int *new2OldEnd) const
-{
- checkAllocated();
- MEDCouplingAutoRefCountObjectPtr<DataArrayInt> ret=DataArrayInt::New();
- int nbComp=getNumberOfComponents();
- int oldNbOfTuples=getNumberOfTuples();
- ret->alloc((int)std::distance(new2OldBg,new2OldEnd),nbComp);
- ret->copyStringInfoFrom(*this);
- int *pt=ret->getPointer();
- const int *srcPt=getConstPointer();
- int i=0;
- for(const int *w=new2OldBg;w!=new2OldEnd;w++,i++)
- if(*w>=0 && *w<oldNbOfTuples)
- std::copy(srcPt+(*w)*nbComp,srcPt+((*w)+1)*nbComp,pt+i*nbComp);
- else
- throw INTERP_KERNEL::Exception("DataArrayInt::selectByTupleIdSafe : some ids has been detected to be out of [0,this->getNumberOfTuples) !");
- ret->copyStringInfoFrom(*this);
- return ret.retn();
-}
-
-/*!
- * Returns a shorten copy of \a this array. The new DataArrayInt contains every
- * (\a bg + \c i * \a step)-th tuple of \a this array located before the \a end2-th
- * tuple. Indices of the selected tuples are the same as ones returned by the Python
- * command \c range( \a bg, \a end2, \a step ).
- * This method is equivalent to selectByTupleIdSafe() except that the input array is
- * not constructed explicitly.
- * For more info on renumbering see \ref numbering.
- * \param [in] bg - index of the first tuple to copy from \a this array.
- * \param [in] end2 - index of the tuple before which the tuples to copy are located.
- * \param [in] step - index increment to get index of the next tuple to copy.
- * \return DataArrayInt * - the new instance of DataArrayInt that the caller
- * is to delete using decrRef() as it is no more needed.
- * \sa DataArrayInt::substr.
- */
-DataArrayInt *DataArrayInt::selectByTupleId2(int bg, int end2, int step) const
-{
- checkAllocated();
- MEDCouplingAutoRefCountObjectPtr<DataArrayInt> ret=DataArrayInt::New();
- int nbComp=getNumberOfComponents();
- int newNbOfTuples=GetNumberOfItemGivenBESRelative(bg,end2,step,"DataArrayInt::selectByTupleId2 : ");
- ret->alloc(newNbOfTuples,nbComp);
- int *pt=ret->getPointer();
- const int *srcPt=getConstPointer()+bg*nbComp;
- for(int i=0;i<newNbOfTuples;i++,srcPt+=step*nbComp)
- std::copy(srcPt,srcPt+nbComp,pt+i*nbComp);
- ret->copyStringInfoFrom(*this);
- return ret.retn();
-}
-
-/*!
- * Returns a shorten copy of \a this array. The new DataArrayInt contains ranges
- * of tuples specified by \a ranges parameter.
- * For more info on renumbering see \ref numbering.
- * \param [in] ranges - std::vector of std::pair's each of which defines a range
- * of tuples in [\c begin,\c end) format.
- * \return DataArrayInt * - the new instance of DataArrayInt that the caller
- * is to delete using decrRef() as it is no more needed.
- * \throw If \a end < \a begin.
- * \throw If \a end > \a this->getNumberOfTuples().
- * \throw If \a this is not allocated.
- */
-DataArray *DataArrayInt::selectByTupleRanges(const std::vector<std::pair<int,int> >& ranges) const
-{
- checkAllocated();
- int nbOfComp=getNumberOfComponents();
- int nbOfTuplesThis=getNumberOfTuples();
- if(ranges.empty())
- {
- MEDCouplingAutoRefCountObjectPtr<DataArrayInt> ret=DataArrayInt::New();
- ret->alloc(0,nbOfComp);
- ret->copyStringInfoFrom(*this);
- return ret.retn();
- }
- int ref=ranges.front().first;
- int nbOfTuples=0;
- bool isIncreasing=true;
- for(std::vector<std::pair<int,int> >::const_iterator it=ranges.begin();it!=ranges.end();it++)
- {
- if((*it).first<=(*it).second)
- {
- if((*it).first>=0 && (*it).second<=nbOfTuplesThis)
- {
- nbOfTuples+=(*it).second-(*it).first;
- if(isIncreasing)
- isIncreasing=ref<=(*it).first;
- ref=(*it).second;
- }
- else
- {
- std::ostringstream oss; oss << "DataArrayInt::selectByTupleRanges : on range #" << std::distance(ranges.begin(),it);
- oss << " (" << (*it).first << "," << (*it).second << ") is greater than number of tuples of this :" << nbOfTuples << " !";
- throw INTERP_KERNEL::Exception(oss.str().c_str());
- }
- }
- else
- {
- std::ostringstream oss; oss << "DataArrayInt::selectByTupleRanges : on range #" << std::distance(ranges.begin(),it);
- oss << " (" << (*it).first << "," << (*it).second << ") end is before begin !";
- throw INTERP_KERNEL::Exception(oss.str().c_str());
- }
- }
- if(isIncreasing && nbOfTuplesThis==nbOfTuples)
- return deepCpy();
- MEDCouplingAutoRefCountObjectPtr<DataArrayInt> ret=DataArrayInt::New();
- ret->alloc(nbOfTuples,nbOfComp);
- ret->copyStringInfoFrom(*this);
- const int *src=getConstPointer();
- int *work=ret->getPointer();
- for(std::vector<std::pair<int,int> >::const_iterator it=ranges.begin();it!=ranges.end();it++)
- work=std::copy(src+(*it).first*nbOfComp,src+(*it).second*nbOfComp,work);
- return ret.retn();
-}
-
-/*!
- * Returns a new DataArrayInt containing a renumbering map in "Old to New" mode.
- * This map, if applied to \a this array, would make it sorted. For example, if
- * \a this array contents are [9,10,0,6,4,11,3,7] then the contents of the result array
- * are [5,6,0,3,2,7,1,4]; if this result array (\a res) is used as an argument in call
- * \a this->renumber(\a res) then the returned array contains [0,3,4,6,7,9,10,11].
- * This method is useful for renumbering (in MED file for example). For more info
- * on renumbering see \ref numbering.
- * \return DataArrayInt * - a new instance of DataArrayInt. The caller is to delete this
- * array using decrRef() as it is no more needed.
- * \throw If \a this is not allocated.
- * \throw If \a this->getNumberOfComponents() != 1.
- * \throw If there are equal values in \a this array.
- */
-DataArrayInt *DataArrayInt::checkAndPreparePermutation() const
-{
- checkAllocated();
- if(getNumberOfComponents()!=1)
- throw INTERP_KERNEL::Exception("DataArrayInt::checkAndPreparePermutation : number of components must == 1 !");
- int nbTuples=getNumberOfTuples();
- const int *pt=getConstPointer();
- int *pt2=CheckAndPreparePermutation(pt,pt+nbTuples);
- DataArrayInt *ret=DataArrayInt::New();
- ret->useArray(pt2,true,C_DEALLOC,nbTuples,1);
- return ret;
-}
-
-/*!
- * This method tries to find the permutation to apply to the first input \a ids1 to obtain the same array (without considering strings informations) the second
- * input array \a ids2.
- * \a ids1 and \a ids2 are expected to be both a list of ids (both with number of components equal to one) not sorted and with values that can be negative.
- * This method will throw an exception is no such permutation array can be obtained. It is typically the case if there is some ids in \a ids1 not in \a ids2 or
- * inversely.
- * In case of success (no throw) : \c ids1->renumber(ret)->isEqual(ids2) where \a ret is the return of this method.
- *
- * \return DataArrayInt * - a new instance of DataArrayInt. The caller is to delete this
- * array using decrRef() as it is no more needed.
- * \throw If either ids1 or ids2 is null not allocated or not with one components.
- *
- */
-DataArrayInt *DataArrayInt::FindPermutationFromFirstToSecond(const DataArrayInt *ids1, const DataArrayInt *ids2)
-{
- if(!ids1 || !ids2)
- throw INTERP_KERNEL::Exception("DataArrayInt::FindPermutationFromFirstToSecond : the two input arrays must be not null !");
- if(!ids1->isAllocated() || !ids2->isAllocated())
- throw INTERP_KERNEL::Exception("DataArrayInt::FindPermutationFromFirstToSecond : the two input arrays must be allocated !");
- if(ids1->getNumberOfComponents()!=1 || ids2->getNumberOfComponents()!=1)
- throw INTERP_KERNEL::Exception("DataArrayInt::FindPermutationFromFirstToSecond : the two input arrays have exactly one component !");
- if(ids1->getNumberOfTuples()!=ids2->getNumberOfTuples())
- {
- std::ostringstream oss; oss << "DataArrayInt::FindPermutationFromFirstToSecond : first array has " << ids1->getNumberOfTuples() << " tuples and the second one " << ids2->getNumberOfTuples() << " tuples ! No chance to find a permutation between the 2 arrays !";
- throw INTERP_KERNEL::Exception(oss.str().c_str());
- }
- MEDCouplingAutoRefCountObjectPtr<DataArrayInt> p1(ids1->deepCpy());
- MEDCouplingAutoRefCountObjectPtr<DataArrayInt> p2(ids2->deepCpy());
- p1->sort(true); p2->sort(true);
- if(!p1->isEqualWithoutConsideringStr(*p2))
- throw INTERP_KERNEL::Exception("DataArrayInt::FindPermutationFromFirstToSecond : the two arrays are not lying on same ids ! Impossible to find a permutation between the 2 arrays !");
- p1=ids1->checkAndPreparePermutation();
- p2=ids2->checkAndPreparePermutation();
- p2=p2->invertArrayO2N2N2O(p2->getNumberOfTuples());
- p2=p2->selectByTupleIdSafe(p1->begin(),p1->end());
- return p2.retn();
-}
-
-/*!
- * Returns two arrays describing a surjective mapping from \a this set of values (\a A)
- * onto a set of values of size \a targetNb (\a B). The surjective function is
- * \a B[ \a A[ i ]] = i. That is to say that for each \a id in [0,\a targetNb), where \a
- * targetNb < \a this->getNumberOfTuples(), there exists at least one tupleId (\a tid) so
- * that <em> this->getIJ( tid, 0 ) == id</em>. <br>
- * The first of out arrays returns indices of elements of \a this array, grouped by their
- * place in the set \a B. The second out array is the index of the first one; it shows how
- * many elements of \a A are mapped into each element of \a B. <br>
- * For more info on
- * mapping and its usage in renumbering see \ref numbering. <br>
- * \b Example:
- * - \a this: [0,3,2,3,2,2,1,2]
- * - \a targetNb: 4
- * - \a arr: [0, 6, 2,4,5,7, 1,3]
- * - \a arrI: [0,1,2,6,8]
- *
- * This result means: <br>
- * the element of \a B 0 encounters within \a A once (\a arrI[ 0+1 ] - \a arrI[ 0 ]) and
- * its index within \a A is 0 ( \a arr[ 0:1 ] == \a arr[ \a arrI[ 0 ] : \a arrI[ 0+1 ]]);<br>
- * the element of \a B 2 encounters within \a A 4 times (\a arrI[ 2+1 ] - \a arrI[ 2 ]) and
- * its indices within \a A are [2,4,5,7] ( \a arr[ 2:6 ] == \a arr[ \a arrI[ 2 ] :
- * \a arrI[ 2+1 ]]); <br> etc.
- * \param [in] targetNb - the size of the set \a B. \a targetNb must be equal or more
- * than the maximal value of \a A.
- * \param [out] arr - a new instance of DataArrayInt returning indices of
- * elements of \a this, grouped by their place in the set \a B. The caller is to delete
- * this array using decrRef() as it is no more needed.
- * \param [out] arrI - a new instance of DataArrayInt returning size of groups of equal
- * elements of \a this. The caller is to delete this array using decrRef() as it
- * is no more needed.
- * \throw If \a this is not allocated.
- * \throw If \a this->getNumberOfComponents() != 1.
- * \throw If any value in \a this is more or equal to \a targetNb.
- */
-void DataArrayInt::changeSurjectiveFormat(int targetNb, DataArrayInt *&arr, DataArrayInt *&arrI) const
-{
- checkAllocated();
- if(getNumberOfComponents()!=1)
- throw INTERP_KERNEL::Exception("DataArrayInt::changeSurjectiveFormat : number of components must == 1 !");
- int nbOfTuples=getNumberOfTuples();
- MEDCouplingAutoRefCountObjectPtr<DataArrayInt> ret(DataArrayInt::New());
- MEDCouplingAutoRefCountObjectPtr<DataArrayInt> retI(DataArrayInt::New());
- retI->alloc(targetNb+1,1);
- const int *input=getConstPointer();
- std::vector< std::vector<int> > tmp(targetNb);
- for(int i=0;i<nbOfTuples;i++)
- {
- int tmp2=input[i];
- if(tmp2>=0 && tmp2<targetNb)
- tmp[tmp2].push_back(i);
- else
- {
- std::ostringstream oss; oss << "DataArrayInt::changeSurjectiveFormat : At pos " << i << " presence of element " << tmp2 << " ! should be in [0," << targetNb << ") !";
- throw INTERP_KERNEL::Exception(oss.str().c_str());
- }
- }
- int *retIPtr=retI->getPointer();
- *retIPtr=0;
- for(std::vector< std::vector<int> >::const_iterator it1=tmp.begin();it1!=tmp.end();it1++,retIPtr++)
- retIPtr[1]=retIPtr[0]+(int)((*it1).size());
- if(nbOfTuples!=retI->getIJ(targetNb,0))
- throw INTERP_KERNEL::Exception("DataArrayInt::changeSurjectiveFormat : big problem should never happen !");
- ret->alloc(nbOfTuples,1);
- int *retPtr=ret->getPointer();
- for(std::vector< std::vector<int> >::const_iterator it1=tmp.begin();it1!=tmp.end();it1++)
- retPtr=std::copy((*it1).begin(),(*it1).end(),retPtr);
- arr=ret.retn();
- arrI=retI.retn();
-}
-
-
-/*!
- * Returns a new DataArrayInt containing a renumbering map in "Old to New" mode computed
- * from a zip representation of a surjective format (returned e.g. by
- * \ref ParaMEDMEM::DataArrayDouble::findCommonTuples() "DataArrayDouble::findCommonTuples()"
- * for example). The result array minimizes the permutation. <br>
- * For more info on renumbering see \ref numbering. <br>
- * \b Example: <br>
- * - \a nbOfOldTuples: 10
- * - \a arr : [0,3, 5,7,9]
- * - \a arrIBg : [0,2,5]
- * - \a newNbOfTuples: 7
- * - result array : [0,1,2,0,3,4,5,4,6,4]
- *
- * \param [in] nbOfOldTuples - number of tuples in the initial array \a arr.
- * \param [in] arr - the array of tuple indices grouped by \a arrIBg array.
- * \param [in] arrIBg - the array dividing all indices stored in \a arr into groups of
- * (indices of) equal values. Its every element (except the last one) points to
- * the first element of a group of equal values.
- * \param [in] arrIEnd - specifies the end of \a arrIBg, so that the last element of \a
- * arrIBg is \a arrIEnd[ -1 ].
- * \param [out] newNbOfTuples - number of tuples after surjection application.
- * \return DataArrayInt * - a new instance of DataArrayInt. The caller is to delete this
- * array using decrRef() as it is no more needed.
- * \throw If any value of \a arr breaks condition ( 0 <= \a arr[ i ] < \a nbOfOldTuples ).
- */
-DataArrayInt *DataArrayInt::BuildOld2NewArrayFromSurjectiveFormat2(int nbOfOldTuples, const int *arr, const int *arrIBg, const int *arrIEnd, int &newNbOfTuples)
-{
- MEDCouplingAutoRefCountObjectPtr<DataArrayInt> ret=DataArrayInt::New();
- ret->alloc(nbOfOldTuples,1);
- int *pt=ret->getPointer();
- std::fill(pt,pt+nbOfOldTuples,-1);
- int nbOfGrps=((int)std::distance(arrIBg,arrIEnd))-1;
- const int *cIPtr=arrIBg;
- for(int i=0;i<nbOfGrps;i++)
- pt[arr[cIPtr[i]]]=-(i+2);
- int newNb=0;
- for(int iNode=0;iNode<nbOfOldTuples;iNode++)
- {
- if(pt[iNode]<0)
- {
- if(pt[iNode]==-1)
- pt[iNode]=newNb++;
- else
- {
- int grpId=-(pt[iNode]+2);
- for(int j=cIPtr[grpId];j<cIPtr[grpId+1];j++)
- {
- if(arr[j]>=0 && arr[j]<nbOfOldTuples)
- pt[arr[j]]=newNb;
- else
- {
- std::ostringstream oss; oss << "DataArrayInt::BuildOld2NewArrayFromSurjectiveFormat2 : With element #" << j << " value is " << arr[j] << " should be in [0," << nbOfOldTuples << ") !";
- throw INTERP_KERNEL::Exception(oss.str().c_str());
- }
- }
- newNb++;
- }
- }
- }
- newNbOfTuples=newNb;
- return ret.retn();
-}
-
-/*!
- * Returns a new DataArrayInt containing a renumbering map in "New to Old" mode,
- * which if applied to \a this array would make it sorted ascendingly.
- * For more info on renumbering see \ref numbering. <br>
- * \b Example: <br>
- * - \a this: [2,0,1,1,0,1,2,0,1,1,0,0]
- * - result: [10,0,5,6,1,7,11,2,8,9,3,4]
- * - after applying result to \a this: [0, 0, 0, 0, 0, 1, 1, 1, 1, 1, 2, 2]
- *
- * \return DataArrayInt * - a new instance of DataArrayInt. The caller is to delete this
- * array using decrRef() as it is no more needed.
- * \throw If \a this is not allocated.
- * \throw If \a this->getNumberOfComponents() != 1.
- */
-DataArrayInt *DataArrayInt::buildPermArrPerLevel() const
-{
- checkAllocated();
- if(getNumberOfComponents()!=1)
- throw INTERP_KERNEL::Exception("DataArrayInt::buildPermArrPerLevel : number of components must == 1 !");
- int nbOfTuples=getNumberOfTuples();
- const int *pt=getConstPointer();
- std::map<int,int> m;
- MEDCouplingAutoRefCountObjectPtr<DataArrayInt> ret=DataArrayInt::New();
- ret->alloc(nbOfTuples,1);
- int *opt=ret->getPointer();
- for(int i=0;i<nbOfTuples;i++,pt++,opt++)
- {
- int val=*pt;
- std::map<int,int>::iterator it=m.find(val);
- if(it!=m.end())
- {
- *opt=(*it).second;
- (*it).second++;
- }
- else
- {
- *opt=0;
- m.insert(std::pair<int,int>(val,1));
- }
- }
- int sum=0;
- for(std::map<int,int>::iterator it=m.begin();it!=m.end();it++)
- {
- int vt=(*it).second;
- (*it).second=sum;
- sum+=vt;
- }
- pt=getConstPointer();
- opt=ret->getPointer();
- for(int i=0;i<nbOfTuples;i++,pt++,opt++)
- *opt+=m[*pt];
- //
- return ret.retn();
-}
-
-/*!
- * Checks if contents of \a this array are equal to that of an array filled with
- * iota(). This method is particularly useful for DataArrayInt instances that represent
- * a renumbering array to check the real need in renumbering. In this case it is better to use isIdentity2
- * method of isIdentity method.
- *
- * \return bool - \a true if \a this array contents == \a range( \a this->getNumberOfTuples())
- * \throw If \a this is not allocated.
- * \throw If \a this->getNumberOfComponents() != 1.
- * \sa isIdentity2
- */
-bool DataArrayInt::isIdentity() const
-{
- checkAllocated();
- if(getNumberOfComponents()!=1)
- return false;
- int nbOfTuples(getNumberOfTuples());
- const int *pt=getConstPointer();
- for(int i=0;i<nbOfTuples;i++,pt++)
- if(*pt!=i)
- return false;
- return true;
-}
-
-/*!
- * This method is stronger than isIdentity method. This method checks than \a this can be considered as an identity function
- * of a set having \a sizeExpected elements into itself.
- *
- * \param [in] sizeExpected - The number of elements
- * \return bool - \a true if \a this array contents == \a range( \a this->getNumberOfTuples()) and if \a this has \a sizeExpected tuples in it.
- *
- * \throw If \a this is not allocated.
- * \throw If \a this->getNumberOfComponents() != 1.
- * \sa isIdentity
- */
-bool DataArrayInt::isIdentity2(int sizeExpected) const
-{
- bool ret0(isIdentity());
- if(!ret0)
- return false;
- return getNumberOfTuples()==sizeExpected;
-}
-
-/*!
- * Checks if all values in \a this array are equal to \a val.
- * \param [in] val - value to check equality of array values to.
- * \return bool - \a true if all values are \a val.
- * \throw If \a this is not allocated.
- * \throw If \a this->getNumberOfComponents() != 1
- */
-bool DataArrayInt::isUniform(int val) const
-{
- checkAllocated();
- if(getNumberOfComponents()!=1)
- throw INTERP_KERNEL::Exception("DataArrayInt::isUniform : must be applied on DataArrayInt with only one component, you can call 'rearrange' method before !");
- int nbOfTuples=getNumberOfTuples();
- const int *w=getConstPointer();
- const int *end2=w+nbOfTuples;
- for(;w!=end2;w++)
- if(*w!=val)
- return false;
- return true;
-}
-
-/*!
- * Creates a new DataArrayDouble and assigns all (textual and numerical) data of \a this
- * array to the new one.
- * \return DataArrayDouble * - the new instance of DataArrayInt.
- */
-DataArrayDouble *DataArrayInt::convertToDblArr() const
-{
- checkAllocated();
- DataArrayDouble *ret=DataArrayDouble::New();
- ret->alloc(getNumberOfTuples(),getNumberOfComponents());
- std::size_t nbOfVals=getNbOfElems();
- const int *src=getConstPointer();
- double *dest=ret->getPointer();
- std::copy(src,src+nbOfVals,dest);
- ret->copyStringInfoFrom(*this);
- return ret;
-}
-
-/*!
- * Returns a shorten copy of \a this array. The new DataArrayInt contains all
- * tuples starting from the \a tupleIdBg-th tuple and including all tuples located before
- * the \a tupleIdEnd-th one. This methods has a similar behavior as std::string::substr().
- * This method is a specialization of selectByTupleId2().
- * \param [in] tupleIdBg - index of the first tuple to copy from \a this array.
- * \param [in] tupleIdEnd - index of the tuple before which the tuples to copy are located.
- * If \a tupleIdEnd == -1, all the tuples till the end of \a this array are copied.
- * \return DataArrayInt * - the new instance of DataArrayInt that the caller
- * is to delete using decrRef() as it is no more needed.
- * \throw If \a tupleIdBg < 0.
- * \throw If \a tupleIdBg > \a this->getNumberOfTuples().
- \throw If \a tupleIdEnd != -1 && \a tupleIdEnd < \a this->getNumberOfTuples().
- * \sa DataArrayInt::selectByTupleId2
- */
-DataArrayInt *DataArrayInt::substr(int tupleIdBg, int tupleIdEnd) const
-{
- checkAllocated();
- int nbt=getNumberOfTuples();
- if(tupleIdBg<0)
- throw INTERP_KERNEL::Exception("DataArrayInt::substr : The tupleIdBg parameter must be greater than 0 !");
- if(tupleIdBg>nbt)
- throw INTERP_KERNEL::Exception("DataArrayInt::substr : The tupleIdBg parameter is greater than number of tuples !");
- int trueEnd=tupleIdEnd;
- if(tupleIdEnd!=-1)
- {
- if(tupleIdEnd>nbt)
- throw INTERP_KERNEL::Exception("DataArrayInt::substr : The tupleIdBg parameter is greater or equal than number of tuples !");
- }
- else
- trueEnd=nbt;
- int nbComp=getNumberOfComponents();
- MEDCouplingAutoRefCountObjectPtr<DataArrayInt> ret=DataArrayInt::New();
- ret->alloc(trueEnd-tupleIdBg,nbComp);
- ret->copyStringInfoFrom(*this);
- std::copy(getConstPointer()+tupleIdBg*nbComp,getConstPointer()+trueEnd*nbComp,ret->getPointer());
- return ret.retn();
-}
-
-/*!
- * Changes the number of components within \a this array so that its raw data **does
- * not** change, instead splitting this data into tuples changes.
- * \warning This method erases all (name and unit) component info set before!
- * \param [in] newNbOfComp - number of components for \a this array to have.
- * \throw If \a this is not allocated
- * \throw If getNbOfElems() % \a newNbOfCompo != 0.
- * \throw If \a newNbOfCompo is lower than 1.
- * \throw If the rearrange method would lead to a number of tuples higher than 2147483647 (maximal capacity of int32 !).
- * \warning This method erases all (name and unit) component info set before!
- */
-void DataArrayInt::rearrange(int newNbOfCompo)
-{
- checkAllocated();
- if(newNbOfCompo<1)
- throw INTERP_KERNEL::Exception("DataArrayInt::rearrange : input newNbOfCompo must be > 0 !");
- std::size_t nbOfElems=getNbOfElems();
- if(nbOfElems%newNbOfCompo!=0)
- throw INTERP_KERNEL::Exception("DataArrayInt::rearrange : nbOfElems%newNbOfCompo!=0 !");
- if(nbOfElems/newNbOfCompo>(std::size_t)std::numeric_limits<int>::max())
- throw INTERP_KERNEL::Exception("DataArrayInt::rearrange : the rearrangement leads to too high number of tuples (> 2147483647) !");
- _info_on_compo.clear();
- _info_on_compo.resize(newNbOfCompo);
- declareAsNew();
-}
-
-/*!
- * Changes the number of components within \a this array to be equal to its number
- * of tuples, and inversely its number of tuples to become equal to its number of
- * components. So that its raw data **does not** change, instead splitting this
- * data into tuples changes.
- * \warning This method erases all (name and unit) component info set before!
- * \warning Do not confuse this method with fromNoInterlace() and toNoInterlace()!
- * \throw If \a this is not allocated.
- * \sa rearrange()
- */
-void DataArrayInt::transpose()
-{
- checkAllocated();
- int nbOfTuples=getNumberOfTuples();
- rearrange(nbOfTuples);
-}
-
-/*!
- * Returns a shorten or extended copy of \a this array. If \a newNbOfComp is less
- * than \a this->getNumberOfComponents() then the result array is shorten as each tuple
- * is truncated to have \a newNbOfComp components, keeping first components. If \a
- * newNbOfComp is more than \a this->getNumberOfComponents() then the result array is
- * expanded as each tuple is populated with \a dftValue to have \a newNbOfComp
- * components.
- * \param [in] newNbOfComp - number of components for the new array to have.
- * \param [in] dftValue - value assigned to new values added to the new array.
- * \return DataArrayDouble * - the new instance of DataArrayDouble that the caller
- * is to delete using decrRef() as it is no more needed.
- * \throw If \a this is not allocated.
- */
-DataArrayInt *DataArrayInt::changeNbOfComponents(int newNbOfComp, int dftValue) const
-{
- checkAllocated();
- MEDCouplingAutoRefCountObjectPtr<DataArrayInt> ret=DataArrayInt::New();
- ret->alloc(getNumberOfTuples(),newNbOfComp);
- const int *oldc=getConstPointer();
- int *nc=ret->getPointer();
- int nbOfTuples=getNumberOfTuples();
- int oldNbOfComp=getNumberOfComponents();
- int dim=std::min(oldNbOfComp,newNbOfComp);
- for(int i=0;i<nbOfTuples;i++)
- {
- int j=0;
- for(;j<dim;j++)
- nc[newNbOfComp*i+j]=oldc[i*oldNbOfComp+j];
- for(;j<newNbOfComp;j++)
- nc[newNbOfComp*i+j]=dftValue;
- }
- ret->setName(getName());
- for(int i=0;i<dim;i++)
- ret->setInfoOnComponent(i,getInfoOnComponent(i));
- ret->setName(getName());
- return ret.retn();
-}
-
-/*!
- * Changes number of tuples in the array. If the new number of tuples is smaller
- * than the current number the array is truncated, otherwise the array is extended.
- * \param [in] nbOfTuples - new number of tuples.
- * \throw If \a this is not allocated.
- * \throw If \a nbOfTuples is negative.
- */
-void DataArrayInt::reAlloc(int nbOfTuples)
-{
- if(nbOfTuples<0)
- throw INTERP_KERNEL::Exception("DataArrayInt::reAlloc : input new number of tuples should be >=0 !");
- checkAllocated();
- _mem.reAlloc(getNumberOfComponents()*(std::size_t)nbOfTuples);
- declareAsNew();
-}
-
-
-/*!
- * Returns a copy of \a this array composed of selected components.
- * The new DataArrayInt has the same number of tuples but includes components
- * specified by \a compoIds parameter. So that getNbOfElems() of the result array
- * can be either less, same or more than \a this->getNbOfElems().
- * \param [in] compoIds - sequence of zero based indices of components to include
- * into the new array.
- * \return DataArrayInt * - the new instance of DataArrayInt that the caller
- * is to delete using decrRef() as it is no more needed.
- * \throw If \a this is not allocated.
- * \throw If a component index (\a i) is not valid:
- * \a i < 0 || \a i >= \a this->getNumberOfComponents().
- *
- * \if ENABLE_EXAMPLES
- * \ref py_mcdataarrayint_keepselectedcomponents "Here is a Python example".
- * \endif
- */
-DataArrayInt *DataArrayInt::keepSelectedComponents(const std::vector<int>& compoIds) const
-{
- checkAllocated();
- MEDCouplingAutoRefCountObjectPtr<DataArrayInt> ret(DataArrayInt::New());
- int newNbOfCompo=(int)compoIds.size();
- int oldNbOfCompo=getNumberOfComponents();
- for(std::vector<int>::const_iterator it=compoIds.begin();it!=compoIds.end();it++)
- DataArray::CheckValueInRange(oldNbOfCompo,(*it),"keepSelectedComponents invalid requested component");
- int nbOfTuples=getNumberOfTuples();
- ret->alloc(nbOfTuples,newNbOfCompo);
- ret->copyPartOfStringInfoFrom(*this,compoIds);
- const int *oldc=getConstPointer();
- int *nc=ret->getPointer();
- for(int i=0;i<nbOfTuples;i++)
- for(int j=0;j<newNbOfCompo;j++,nc++)
- *nc=oldc[i*oldNbOfCompo+compoIds[j]];
- return ret.retn();
-}
-
-/*!
- * Appends components of another array to components of \a this one, tuple by tuple.
- * So that the number of tuples of \a this array remains the same and the number of
- * components increases.
- * \param [in] other - the DataArrayInt to append to \a this one.
- * \throw If \a this is not allocated.
- * \throw If \a this and \a other arrays have different number of tuples.
- *
- * \if ENABLE_EXAMPLES
- * \ref cpp_mcdataarrayint_meldwith "Here is a C++ example".
- *
- * \ref py_mcdataarrayint_meldwith "Here is a Python example".
- * \endif
- */
-void DataArrayInt::meldWith(const DataArrayInt *other)
-{
- if(!other)
- throw INTERP_KERNEL::Exception("DataArrayInt::meldWith : DataArrayInt pointer in input is NULL !");
- checkAllocated();
- other->checkAllocated();
- int nbOfTuples=getNumberOfTuples();
- if(nbOfTuples!=other->getNumberOfTuples())
- throw INTERP_KERNEL::Exception("DataArrayInt::meldWith : mismatch of number of tuples !");
- int nbOfComp1=getNumberOfComponents();
- int nbOfComp2=other->getNumberOfComponents();
- int *newArr=(int *)malloc(nbOfTuples*(nbOfComp1+nbOfComp2)*sizeof(int));
- int *w=newArr;
- const int *inp1=getConstPointer();
- const int *inp2=other->getConstPointer();
- for(int i=0;i<nbOfTuples;i++,inp1+=nbOfComp1,inp2+=nbOfComp2)
- {
- w=std::copy(inp1,inp1+nbOfComp1,w);
- w=std::copy(inp2,inp2+nbOfComp2,w);
- }
- useArray(newArr,true,C_DEALLOC,nbOfTuples,nbOfComp1+nbOfComp2);
- std::vector<int> compIds(nbOfComp2);
- for(int i=0;i<nbOfComp2;i++)
- compIds[i]=nbOfComp1+i;
- copyPartOfStringInfoFrom2(compIds,*other);
-}
-
-/*!
- * Copy all components in a specified order from another DataArrayInt.
- * The specified components become the first ones in \a this array.
- * Both numerical and textual data is copied. The number of tuples in \a this and
- * the other array can be different.
- * \param [in] a - the array to copy data from.
- * \param [in] compoIds - sequence of zero based indices of components, data of which is
- * to be copied.
- * \throw If \a a is NULL.
- * \throw If \a compoIds.size() != \a a->getNumberOfComponents().
- * \throw If \a compoIds[i] < 0 or \a compoIds[i] > \a this->getNumberOfComponents().
- *
- * \if ENABLE_EXAMPLES
- * \ref py_mcdataarrayint_setselectedcomponents "Here is a Python example".
- * \endif
- */
-void DataArrayInt::setSelectedComponents(const DataArrayInt *a, const std::vector<int>& compoIds)
-{
- if(!a)
- throw INTERP_KERNEL::Exception("DataArrayInt::setSelectedComponents : input DataArrayInt is NULL !");
- checkAllocated();
- a->checkAllocated();
- copyPartOfStringInfoFrom2(compoIds,*a);
- std::size_t partOfCompoSz=compoIds.size();
- int nbOfCompo=getNumberOfComponents();
- int nbOfTuples=std::min(getNumberOfTuples(),a->getNumberOfTuples());
- const int *ac=a->getConstPointer();
- int *nc=getPointer();
- for(int i=0;i<nbOfTuples;i++)
- for(std::size_t j=0;j<partOfCompoSz;j++,ac++)
- nc[nbOfCompo*i+compoIds[j]]=*ac;
-}
-
-/*!
- * Copy all values from another DataArrayInt into specified tuples and components
- * of \a this array. Textual data is not copied.
- * The tree parameters defining set of indices of tuples and components are similar to
- * the tree parameters of the Python function \c range(\c start,\c stop,\c step).
- * \param [in] a - the array to copy values from.
- * \param [in] bgTuples - index of the first tuple of \a this array to assign values to.
- * \param [in] endTuples - index of the tuple before which the tuples to assign to
- * are located.
- * \param [in] stepTuples - index increment to get index of the next tuple to assign to.
- * \param [in] bgComp - index of the first component of \a this array to assign values to.
- * \param [in] endComp - index of the component before which the components to assign
- * to are located.
- * \param [in] stepComp - index increment to get index of the next component to assign to.
- * \param [in] strictCompoCompare - if \a true (by default), then \a a->getNumberOfComponents()
- * must be equal to the number of columns to assign to, else an
- * exception is thrown; if \a false, then it is only required that \a
- * a->getNbOfElems() equals to number of values to assign to (this condition
- * must be respected even if \a strictCompoCompare is \a true). The number of
- * values to assign to is given by following Python expression:
- * \a nbTargetValues =
- * \c len(\c range(\a bgTuples,\a endTuples,\a stepTuples)) *
- * \c len(\c range(\a bgComp,\a endComp,\a stepComp)).
- * \throw If \a a is NULL.
- * \throw If \a a is not allocated.
- * \throw If \a this is not allocated.
- * \throw If parameters specifying tuples and components to assign to do not give a
- * non-empty range of increasing indices.
- * \throw If \a a->getNbOfElems() != \a nbTargetValues.
- * \throw If \a strictCompoCompare == \a true && \a a->getNumberOfComponents() !=
- * \c len(\c range(\a bgComp,\a endComp,\a stepComp)).
- *
- * \if ENABLE_EXAMPLES
- * \ref py_mcdataarrayint_setpartofvalues1 "Here is a Python example".
- * \endif
- */
-void DataArrayInt::setPartOfValues1(const DataArrayInt *a, int bgTuples, int endTuples, int stepTuples, int bgComp, int endComp, int stepComp, bool strictCompoCompare)
-{
- if(!a)
- throw INTERP_KERNEL::Exception("DataArrayInt::setPartOfValues1 : DataArrayInt pointer in input is NULL !");
- const char msg[]="DataArrayInt::setPartOfValues1";
- checkAllocated();
- a->checkAllocated();
- int newNbOfTuples=DataArray::GetNumberOfItemGivenBES(bgTuples,endTuples,stepTuples,msg);
- int newNbOfComp=DataArray::GetNumberOfItemGivenBES(bgComp,endComp,stepComp,msg);
- int nbComp=getNumberOfComponents();
- int nbOfTuples=getNumberOfTuples();
- DataArray::CheckValueInRangeEx(nbOfTuples,bgTuples,endTuples,"invalid tuple value");
- DataArray::CheckValueInRangeEx(nbComp,bgComp,endComp,"invalid component value");
- bool assignTech=true;
- if(a->getNbOfElems()==(std::size_t)newNbOfTuples*newNbOfComp)
- {
- if(strictCompoCompare)
- a->checkNbOfTuplesAndComp(newNbOfTuples,newNbOfComp,msg);
- }
- else
- {
- a->checkNbOfTuplesAndComp(1,newNbOfComp,msg);
- assignTech=false;
- }
- int *pt=getPointer()+bgTuples*nbComp+bgComp;
- const int *srcPt=a->getConstPointer();
- if(assignTech)
- {
- for(int i=0;i<newNbOfTuples;i++,pt+=stepTuples*nbComp)
- for(int j=0;j<newNbOfComp;j++,srcPt++)
- pt[j*stepComp]=*srcPt;
- }
- else
- {
- for(int i=0;i<newNbOfTuples;i++,pt+=stepTuples*nbComp)
- {
- const int *srcPt2=srcPt;
- for(int j=0;j<newNbOfComp;j++,srcPt2++)
- pt[j*stepComp]=*srcPt2;
- }
- }
-}
-
-/*!
- * Assign a given value to values at specified tuples and components of \a this array.
- * The tree parameters defining set of indices of tuples and components are similar to
- * the tree parameters of the Python function \c range(\c start,\c stop,\c step)..
- * \param [in] a - the value to assign.
- * \param [in] bgTuples - index of the first tuple of \a this array to assign to.
- * \param [in] endTuples - index of the tuple before which the tuples to assign to
- * are located.
- * \param [in] stepTuples - index increment to get index of the next tuple to assign to.
- * \param [in] bgComp - index of the first component of \a this array to assign to.
- * \param [in] endComp - index of the component before which the components to assign
- * to are located.
- * \param [in] stepComp - index increment to get index of the next component to assign to.
- * \throw If \a this is not allocated.
- * \throw If parameters specifying tuples and components to assign to, do not give a
- * non-empty range of increasing indices or indices are out of a valid range
- * for \c this array.
- *
- * \if ENABLE_EXAMPLES
- * \ref py_mcdataarrayint_setpartofvaluessimple1 "Here is a Python example".
- * \endif
- */
-void DataArrayInt::setPartOfValuesSimple1(int a, int bgTuples, int endTuples, int stepTuples, int bgComp, int endComp, int stepComp)
-{
- const char msg[]="DataArrayInt::setPartOfValuesSimple1";
- checkAllocated();
- int newNbOfTuples=DataArray::GetNumberOfItemGivenBES(bgTuples,endTuples,stepTuples,msg);
- int newNbOfComp=DataArray::GetNumberOfItemGivenBES(bgComp,endComp,stepComp,msg);
- int nbComp=getNumberOfComponents();
- int nbOfTuples=getNumberOfTuples();
- DataArray::CheckValueInRangeEx(nbOfTuples,bgTuples,endTuples,"invalid tuple value");
- DataArray::CheckValueInRangeEx(nbComp,bgComp,endComp,"invalid component value");
- int *pt=getPointer()+bgTuples*nbComp+bgComp;
- for(int i=0;i<newNbOfTuples;i++,pt+=stepTuples*nbComp)
- for(int j=0;j<newNbOfComp;j++)
- pt[j*stepComp]=a;
-}
-
-
-/*!
- * Copy all values from another DataArrayInt (\a a) into specified tuples and
- * components of \a this array. Textual data is not copied.
- * The tuples and components to assign to are defined by C arrays of indices.
- * There are two *modes of usage*:
- * - If \a a->getNbOfElems() equals to number of values to assign to, then every value
- * of \a a is assigned to its own location within \a this array.
- * - If \a a includes one tuple, then all values of \a a are assigned to the specified
- * components of every specified tuple of \a this array. In this mode it is required
- * that \a a->getNumberOfComponents() equals to the number of specified components.
- *
- * \param [in] a - the array to copy values from.
- * \param [in] bgTuples - pointer to an array of tuple indices of \a this array to
- * assign values of \a a to.
- * \param [in] endTuples - specifies the end of the array \a bgTuples, so that
- * pointer to a tuple index <em>(pi)</em> varies as this:
- * \a bgTuples <= \a pi < \a endTuples.
- * \param [in] bgComp - pointer to an array of component indices of \a this array to
- * assign values of \a a to.
- * \param [in] endComp - specifies the end of the array \a bgTuples, so that
- * pointer to a component index <em>(pi)</em> varies as this:
- * \a bgComp <= \a pi < \a endComp.
- * \param [in] strictCompoCompare - this parameter is checked only if the
- * *mode of usage* is the first; if it is \a true (default),
- * then \a a->getNumberOfComponents() must be equal
- * to the number of specified columns, else this is not required.
- * \throw If \a a is NULL.
- * \throw If \a a is not allocated.
- * \throw If \a this is not allocated.
- * \throw If any index of tuple/component given by <em>bgTuples / bgComp</em> is
- * out of a valid range for \a this array.
- * \throw In the first *mode of usage*, if <em>strictCompoCompare == true </em> and
- * if <em> a->getNumberOfComponents() != (endComp - bgComp) </em>.
- * \throw In the second *mode of usage*, if \a a->getNumberOfTuples() != 1 or
- * <em> a->getNumberOfComponents() != (endComp - bgComp)</em>.
- *
- * \if ENABLE_EXAMPLES
- * \ref py_mcdataarrayint_setpartofvalues2 "Here is a Python example".
- * \endif
- */
-void DataArrayInt::setPartOfValues2(const DataArrayInt *a, const int *bgTuples, const int *endTuples, const int *bgComp, const int *endComp, bool strictCompoCompare)
-{
- if(!a)
- throw INTERP_KERNEL::Exception("DataArrayInt::setPartOfValues2 : DataArrayInt pointer in input is NULL !");
- const char msg[]="DataArrayInt::setPartOfValues2";
- checkAllocated();
- a->checkAllocated();
- int nbComp=getNumberOfComponents();
- int nbOfTuples=getNumberOfTuples();
- for(const int *z=bgComp;z!=endComp;z++)
- DataArray::CheckValueInRange(nbComp,*z,"invalid component id");
- int newNbOfTuples=(int)std::distance(bgTuples,endTuples);
- int newNbOfComp=(int)std::distance(bgComp,endComp);
- bool assignTech=true;
- if(a->getNbOfElems()==(std::size_t)newNbOfTuples*newNbOfComp)
- {
- if(strictCompoCompare)
- a->checkNbOfTuplesAndComp(newNbOfTuples,newNbOfComp,msg);
- }
- else
- {
- a->checkNbOfTuplesAndComp(1,newNbOfComp,msg);
- assignTech=false;
- }
- int *pt=getPointer();
- const int *srcPt=a->getConstPointer();
- if(assignTech)
- {
- for(const int *w=bgTuples;w!=endTuples;w++)
- {
- DataArray::CheckValueInRange(nbOfTuples,*w,"invalid tuple id");
- for(const int *z=bgComp;z!=endComp;z++,srcPt++)
- {
- pt[(std::size_t)(*w)*nbComp+(*z)]=*srcPt;
- }
- }
- }
- else
- {
- for(const int *w=bgTuples;w!=endTuples;w++)
- {
- const int *srcPt2=srcPt;
- DataArray::CheckValueInRange(nbOfTuples,*w,"invalid tuple id");
- for(const int *z=bgComp;z!=endComp;z++,srcPt2++)
- {
- pt[(std::size_t)(*w)*nbComp+(*z)]=*srcPt2;
- }
- }
- }
-}
-
-/*!
- * Assign a given value to values at specified tuples and components of \a this array.
- * The tuples and components to assign to are defined by C arrays of indices.
- * \param [in] a - the value to assign.
- * \param [in] bgTuples - pointer to an array of tuple indices of \a this array to
- * assign \a a to.
- * \param [in] endTuples - specifies the end of the array \a bgTuples, so that
- * pointer to a tuple index (\a pi) varies as this:
- * \a bgTuples <= \a pi < \a endTuples.
- * \param [in] bgComp - pointer to an array of component indices of \a this array to
- * assign \a a to.
- * \param [in] endComp - specifies the end of the array \a bgTuples, so that
- * pointer to a component index (\a pi) varies as this:
- * \a bgComp <= \a pi < \a endComp.
- * \throw If \a this is not allocated.
- * \throw If any index of tuple/component given by <em>bgTuples / bgComp</em> is
- * out of a valid range for \a this array.
- *
- * \if ENABLE_EXAMPLES
- * \ref py_mcdataarrayint_setpartofvaluessimple2 "Here is a Python example".
- * \endif
- */
-void DataArrayInt::setPartOfValuesSimple2(int a, const int *bgTuples, const int *endTuples, const int *bgComp, const int *endComp)
-{
- checkAllocated();
- int nbComp=getNumberOfComponents();
- int nbOfTuples=getNumberOfTuples();
- for(const int *z=bgComp;z!=endComp;z++)
- DataArray::CheckValueInRange(nbComp,*z,"invalid component id");
- int *pt=getPointer();
- for(const int *w=bgTuples;w!=endTuples;w++)
- for(const int *z=bgComp;z!=endComp;z++)
- {
- DataArray::CheckValueInRange(nbOfTuples,*w,"invalid tuple id");
- pt[(std::size_t)(*w)*nbComp+(*z)]=a;
- }
-}
-
-/*!
- * Copy all values from another DataArrayInt (\a a) into specified tuples and
- * components of \a this array. Textual data is not copied.
- * The tuples to assign to are defined by a C array of indices.
- * The components to assign to are defined by three values similar to parameters of
- * the Python function \c range(\c start,\c stop,\c step).
- * There are two *modes of usage*:
- * - If \a a->getNbOfElems() equals to number of values to assign to, then every value
- * of \a a is assigned to its own location within \a this array.
- * - If \a a includes one tuple, then all values of \a a are assigned to the specified
- * components of every specified tuple of \a this array. In this mode it is required
- * that \a a->getNumberOfComponents() equals to the number of specified components.
- *
- * \param [in] a - the array to copy values from.
- * \param [in] bgTuples - pointer to an array of tuple indices of \a this array to
- * assign values of \a a to.
- * \param [in] endTuples - specifies the end of the array \a bgTuples, so that
- * pointer to a tuple index <em>(pi)</em> varies as this:
- * \a bgTuples <= \a pi < \a endTuples.
- * \param [in] bgComp - index of the first component of \a this array to assign to.
- * \param [in] endComp - index of the component before which the components to assign
- * to are located.
- * \param [in] stepComp - index increment to get index of the next component to assign to.
- * \param [in] strictCompoCompare - this parameter is checked only in the first
- * *mode of usage*; if \a strictCompoCompare is \a true (default),
- * then \a a->getNumberOfComponents() must be equal
- * to the number of specified columns, else this is not required.
- * \throw If \a a is NULL.
- * \throw If \a a is not allocated.
- * \throw If \a this is not allocated.
- * \throw If any index of tuple given by \a bgTuples is out of a valid range for
- * \a this array.
- * \throw In the first *mode of usage*, if <em>strictCompoCompare == true </em> and
- * if <em> a->getNumberOfComponents()</em> is unequal to the number of components
- * defined by <em>(bgComp,endComp,stepComp)</em>.
- * \throw In the second *mode of usage*, if \a a->getNumberOfTuples() != 1 or
- * <em> a->getNumberOfComponents()</em> is unequal to the number of components
- * defined by <em>(bgComp,endComp,stepComp)</em>.
- * \throw If parameters specifying components to assign to, do not give a
- * non-empty range of increasing indices or indices are out of a valid range
- * for \c this array.
- *
- * \if ENABLE_EXAMPLES
- * \ref py_mcdataarrayint_setpartofvalues3 "Here is a Python example".
- * \endif
- */
-void DataArrayInt::setPartOfValues3(const DataArrayInt *a, const int *bgTuples, const int *endTuples, int bgComp, int endComp, int stepComp, bool strictCompoCompare)
-{
- if(!a)
- throw INTERP_KERNEL::Exception("DataArrayInt::setPartOfValues3 : DataArrayInt pointer in input is NULL !");
- const char msg[]="DataArrayInt::setPartOfValues3";
- checkAllocated();
- a->checkAllocated();
- int newNbOfComp=DataArray::GetNumberOfItemGivenBES(bgComp,endComp,stepComp,msg);
- int nbComp=getNumberOfComponents();
- int nbOfTuples=getNumberOfTuples();
- DataArray::CheckValueInRangeEx(nbComp,bgComp,endComp,"invalid component value");
- int newNbOfTuples=(int)std::distance(bgTuples,endTuples);
- bool assignTech=true;
- if(a->getNbOfElems()==(std::size_t)newNbOfTuples*newNbOfComp)
- {
- if(strictCompoCompare)
- a->checkNbOfTuplesAndComp(newNbOfTuples,newNbOfComp,msg);
- }
- else
- {
- a->checkNbOfTuplesAndComp(1,newNbOfComp,msg);
- assignTech=false;
- }
- int *pt=getPointer()+bgComp;
- const int *srcPt=a->getConstPointer();
- if(assignTech)
- {
- for(const int *w=bgTuples;w!=endTuples;w++)
- for(int j=0;j<newNbOfComp;j++,srcPt++)
- {
- DataArray::CheckValueInRange(nbOfTuples,*w,"invalid tuple id");
- pt[(std::size_t)(*w)*nbComp+j*stepComp]=*srcPt;
- }
- }
- else
- {
- for(const int *w=bgTuples;w!=endTuples;w++)
- {
- const int *srcPt2=srcPt;
- for(int j=0;j<newNbOfComp;j++,srcPt2++)
- {
- DataArray::CheckValueInRange(nbOfTuples,*w,"invalid tuple id");
- pt[(std::size_t)(*w)*nbComp+j*stepComp]=*srcPt2;
- }
- }
- }
-}
-
-/*!
- * Assign a given value to values at specified tuples and components of \a this array.
- * The tuples to assign to are defined by a C array of indices.
- * The components to assign to are defined by three values similar to parameters of
- * the Python function \c range(\c start,\c stop,\c step).
- * \param [in] a - the value to assign.
- * \param [in] bgTuples - pointer to an array of tuple indices of \a this array to
- * assign \a a to.
- * \param [in] endTuples - specifies the end of the array \a bgTuples, so that
- * pointer to a tuple index <em>(pi)</em> varies as this:
- * \a bgTuples <= \a pi < \a endTuples.
- * \param [in] bgComp - index of the first component of \a this array to assign to.
- * \param [in] endComp - index of the component before which the components to assign
- * to are located.
- * \param [in] stepComp - index increment to get index of the next component to assign to.
- * \throw If \a this is not allocated.
- * \throw If any index of tuple given by \a bgTuples is out of a valid range for
- * \a this array.
- * \throw If parameters specifying components to assign to, do not give a
- * non-empty range of increasing indices or indices are out of a valid range
- * for \c this array.
- *
- * \if ENABLE_EXAMPLES
- * \ref py_mcdataarrayint_setpartofvaluessimple3 "Here is a Python example".
- * \endif
- */
-void DataArrayInt::setPartOfValuesSimple3(int a, const int *bgTuples, const int *endTuples, int bgComp, int endComp, int stepComp)
-{
- const char msg[]="DataArrayInt::setPartOfValuesSimple3";
- checkAllocated();
- int newNbOfComp=DataArray::GetNumberOfItemGivenBES(bgComp,endComp,stepComp,msg);
- int nbComp=getNumberOfComponents();
- int nbOfTuples=getNumberOfTuples();
- DataArray::CheckValueInRangeEx(nbComp,bgComp,endComp,"invalid component value");
- int *pt=getPointer()+bgComp;
- for(const int *w=bgTuples;w!=endTuples;w++)
- for(int j=0;j<newNbOfComp;j++)
- {
- DataArray::CheckValueInRange(nbOfTuples,*w,"invalid tuple id");
- pt[(std::size_t)(*w)*nbComp+j*stepComp]=a;
- }
-}
-
-void DataArrayInt::setPartOfValues4(const DataArrayInt *a, int bgTuples, int endTuples, int stepTuples, const int *bgComp, const int *endComp, bool strictCompoCompare)
-{
- if(!a)
- throw INTERP_KERNEL::Exception("DataArrayInt::setPartOfValues4 : input DataArrayInt is NULL !");
- const char msg[]="DataArrayInt::setPartOfValues4";
- checkAllocated();
- a->checkAllocated();
- int newNbOfTuples=DataArray::GetNumberOfItemGivenBES(bgTuples,endTuples,stepTuples,msg);
- int newNbOfComp=(int)std::distance(bgComp,endComp);
- int nbComp=getNumberOfComponents();
- for(const int *z=bgComp;z!=endComp;z++)
- DataArray::CheckValueInRange(nbComp,*z,"invalid component id");
- int nbOfTuples=getNumberOfTuples();
- DataArray::CheckValueInRangeEx(nbOfTuples,bgTuples,endTuples,"invalid tuple value");
- bool assignTech=true;
- if(a->getNbOfElems()==(std::size_t)newNbOfTuples*newNbOfComp)
- {
- if(strictCompoCompare)
- a->checkNbOfTuplesAndComp(newNbOfTuples,newNbOfComp,msg);
- }
- else
- {
- a->checkNbOfTuplesAndComp(1,newNbOfComp,msg);
- assignTech=false;
- }
- const int *srcPt=a->getConstPointer();
- int *pt=getPointer()+bgTuples*nbComp;
- if(assignTech)
- {
- for(int i=0;i<newNbOfTuples;i++,pt+=stepTuples*nbComp)
- for(const int *z=bgComp;z!=endComp;z++,srcPt++)
- pt[*z]=*srcPt;
- }
- else
- {
- for(int i=0;i<newNbOfTuples;i++,pt+=stepTuples*nbComp)
- {
- const int *srcPt2=srcPt;
- for(const int *z=bgComp;z!=endComp;z++,srcPt2++)
- pt[*z]=*srcPt2;
- }
- }
-}
-
-void DataArrayInt::setPartOfValuesSimple4(int a, int bgTuples, int endTuples, int stepTuples, const int *bgComp, const int *endComp)
-{
- const char msg[]="DataArrayInt::setPartOfValuesSimple4";
- checkAllocated();
- int newNbOfTuples=DataArray::GetNumberOfItemGivenBES(bgTuples,endTuples,stepTuples,msg);
- int nbComp=getNumberOfComponents();
- for(const int *z=bgComp;z!=endComp;z++)
- DataArray::CheckValueInRange(nbComp,*z,"invalid component id");
- int nbOfTuples=getNumberOfTuples();
- DataArray::CheckValueInRangeEx(nbOfTuples,bgTuples,endTuples,"invalid tuple value");
- int *pt=getPointer()+bgTuples*nbComp;
- for(int i=0;i<newNbOfTuples;i++,pt+=stepTuples*nbComp)
- for(const int *z=bgComp;z!=endComp;z++)
- pt[*z]=a;
-}
-
-/*!
- * Copy some tuples from another DataArrayInt into specified tuples
- * of \a this array. Textual data is not copied. Both arrays must have equal number of
- * components.
- * Both the tuples to assign and the tuples to assign to are defined by a DataArrayInt.
- * All components of selected tuples are copied.
- * \param [in] a - the array to copy values from.
- * \param [in] tuplesSelec - the array specifying both source tuples of \a a and
- * target tuples of \a this. \a tuplesSelec has two components, and the
- * first component specifies index of the source tuple and the second
- * one specifies index of the target tuple.
- * \throw If \a this is not allocated.
- * \throw If \a a is NULL.
- * \throw If \a a is not allocated.
- * \throw If \a tuplesSelec is NULL.
- * \throw If \a tuplesSelec is not allocated.
- * \throw If <em>this->getNumberOfComponents() != a->getNumberOfComponents()</em>.
- * \throw If \a tuplesSelec->getNumberOfComponents() != 2.
- * \throw If any tuple index given by \a tuplesSelec is out of a valid range for
- * the corresponding (\a this or \a a) array.
- */
-void DataArrayInt::setPartOfValuesAdv(const DataArrayInt *a, const DataArrayInt *tuplesSelec)
-{
- if(!a || !tuplesSelec)
- throw INTERP_KERNEL::Exception("DataArrayInt::setPartOfValuesAdv : DataArrayInt pointer in input is NULL !");
- checkAllocated();
- a->checkAllocated();
- tuplesSelec->checkAllocated();
- int nbOfComp=getNumberOfComponents();
- if(nbOfComp!=a->getNumberOfComponents())
- throw INTERP_KERNEL::Exception("DataArrayInt::setPartOfValuesAdv : This and a do not have the same number of components !");
- if(tuplesSelec->getNumberOfComponents()!=2)
- throw INTERP_KERNEL::Exception("DataArrayInt::setPartOfValuesAdv : Expecting to have a tuple selector DataArrayInt instance with exactly 2 components !");
- int thisNt=getNumberOfTuples();
- int aNt=a->getNumberOfTuples();
- int *valsToSet=getPointer();
- const int *valsSrc=a->getConstPointer();
- for(const int *tuple=tuplesSelec->begin();tuple!=tuplesSelec->end();tuple+=2)
- {
- if(tuple[1]>=0 && tuple[1]<aNt)
- {
- if(tuple[0]>=0 && tuple[0]<thisNt)
- std::copy(valsSrc+nbOfComp*tuple[1],valsSrc+nbOfComp*(tuple[1]+1),valsToSet+nbOfComp*tuple[0]);
- else
- {
- std::ostringstream oss; oss << "DataArrayInt::setPartOfValuesAdv : Tuple #" << std::distance(tuplesSelec->begin(),tuple)/2;
- oss << " of 'tuplesSelec' request of tuple id #" << tuple[0] << " in 'this' ! It should be in [0," << thisNt << ") !";
- throw INTERP_KERNEL::Exception(oss.str().c_str());
- }
- }
- else
- {
- std::ostringstream oss; oss << "DataArrayInt::setPartOfValuesAdv : Tuple #" << std::distance(tuplesSelec->begin(),tuple)/2;
- oss << " of 'tuplesSelec' request of tuple id #" << tuple[1] << " in 'a' ! It should be in [0," << aNt << ") !";
- throw INTERP_KERNEL::Exception(oss.str().c_str());
- }
- }
-}
-
-/*!
- * Copy some tuples from another DataArrayInt (\a aBase) into contiguous tuples
- * of \a this array. Textual data is not copied. Both arrays must have equal number of
- * components.
- * The tuples to assign to are defined by index of the first tuple, and
- * their number is defined by \a tuplesSelec->getNumberOfTuples().
- * The tuples to copy are defined by values of a DataArrayInt.
- * All components of selected tuples are copied.
- * \param [in] tupleIdStart - index of the first tuple of \a this array to assign
- * values to.
- * \param [in] aBase - the array to copy values from.
- * \param [in] tuplesSelec - the array specifying tuples of \a aBase to copy.
- * \throw If \a this is not allocated.
- * \throw If \a aBase is NULL.
- * \throw If \a aBase is not allocated.
- * \throw If \a tuplesSelec is NULL.
- * \throw If \a tuplesSelec is not allocated.
- * \throw If <em>this->getNumberOfComponents() != a->getNumberOfComponents()</em>.
- * \throw If \a tuplesSelec->getNumberOfComponents() != 1.
- * \throw If <em>tupleIdStart + tuplesSelec->getNumberOfTuples() > this->getNumberOfTuples().</em>
- * \throw If any tuple index given by \a tuplesSelec is out of a valid range for
- * \a aBase array.
- */
-void DataArrayInt::setContigPartOfSelectedValues(int tupleIdStart, const DataArray *aBase, const DataArrayInt *tuplesSelec)
-{
- if(!aBase || !tuplesSelec)
- throw INTERP_KERNEL::Exception("DataArrayInt::setContigPartOfSelectedValues : input DataArray is NULL !");
- const DataArrayInt *a=dynamic_cast<const DataArrayInt *>(aBase);
- if(!a)
- throw INTERP_KERNEL::Exception("DataArrayInt::setContigPartOfSelectedValues : input DataArray aBase is not a DataArrayInt !");
- checkAllocated();
- a->checkAllocated();
- tuplesSelec->checkAllocated();
- int nbOfComp=getNumberOfComponents();
- if(nbOfComp!=a->getNumberOfComponents())
- throw INTERP_KERNEL::Exception("DataArrayInt::setContigPartOfSelectedValues : This and a do not have the same number of components !");
- if(tuplesSelec->getNumberOfComponents()!=1)
- throw INTERP_KERNEL::Exception("DataArrayInt::setContigPartOfSelectedValues : Expecting to have a tuple selector DataArrayInt instance with exactly 1 component !");
- int thisNt=getNumberOfTuples();
- int aNt=a->getNumberOfTuples();
- int nbOfTupleToWrite=tuplesSelec->getNumberOfTuples();
- int *valsToSet=getPointer()+tupleIdStart*nbOfComp;
- if(tupleIdStart+nbOfTupleToWrite>thisNt)
- throw INTERP_KERNEL::Exception("DataArrayInt::setContigPartOfSelectedValues : invalid number range of values to write !");
- const int *valsSrc=a->getConstPointer();
- for(const int *tuple=tuplesSelec->begin();tuple!=tuplesSelec->end();tuple++,valsToSet+=nbOfComp)
- {
- if(*tuple>=0 && *tuple<aNt)
- {
- std::copy(valsSrc+nbOfComp*(*tuple),valsSrc+nbOfComp*(*tuple+1),valsToSet);
- }
- else
- {
- std::ostringstream oss; oss << "DataArrayInt::setContigPartOfSelectedValues : Tuple #" << std::distance(tuplesSelec->begin(),tuple);
- oss << " of 'tuplesSelec' request of tuple id #" << *tuple << " in 'a' ! It should be in [0," << aNt << ") !";
- throw INTERP_KERNEL::Exception(oss.str().c_str());
- }
- }
-}
-
-/*!
- * Copy some tuples from another DataArrayInt (\a aBase) into contiguous tuples
- * of \a this array. Textual data is not copied. Both arrays must have equal number of
- * components.
- * The tuples to copy are defined by three values similar to parameters of
- * the Python function \c range(\c start,\c stop,\c step).
- * The tuples to assign to are defined by index of the first tuple, and
- * their number is defined by number of tuples to copy.
- * All components of selected tuples are copied.
- * \param [in] tupleIdStart - index of the first tuple of \a this array to assign
- * values to.
- * \param [in] aBase - the array to copy values from.
- * \param [in] bg - index of the first tuple to copy of the array \a aBase.
- * \param [in] end2 - index of the tuple of \a aBase before which the tuples to copy
- * are located.
- * \param [in] step - index increment to get index of the next tuple to copy.
- * \throw If \a this is not allocated.
- * \throw If \a aBase is NULL.
- * \throw If \a aBase is not allocated.
- * \throw If <em>this->getNumberOfComponents() != aBase->getNumberOfComponents()</em>.
- * \throw If <em>tupleIdStart + len(range(bg,end2,step)) > this->getNumberOfTuples().</em>
- * \throw If parameters specifying tuples to copy, do not give a
- * non-empty range of increasing indices or indices are out of a valid range
- * for the array \a aBase.
- */
-void DataArrayInt::setContigPartOfSelectedValues2(int tupleIdStart, const DataArray *aBase, int bg, int end2, int step)
-{
- if(!aBase)
- throw INTERP_KERNEL::Exception("DataArrayInt::setContigPartOfSelectedValues2 : input DataArray is NULL !");
- const DataArrayInt *a=dynamic_cast<const DataArrayInt *>(aBase);
- if(!a)
- throw INTERP_KERNEL::Exception("DataArrayInt::setContigPartOfSelectedValues2 : input DataArray aBase is not a DataArrayInt !");
- checkAllocated();
- a->checkAllocated();
- int nbOfComp=getNumberOfComponents();
- const char msg[]="DataArrayInt::setContigPartOfSelectedValues2";
- int nbOfTupleToWrite=DataArray::GetNumberOfItemGivenBES(bg,end2,step,msg);
- if(nbOfComp!=a->getNumberOfComponents())
- throw INTERP_KERNEL::Exception("DataArrayInt::setContigPartOfSelectedValues2 : This and a do not have the same number of components !");
- int thisNt=getNumberOfTuples();
- int aNt=a->getNumberOfTuples();
- int *valsToSet=getPointer()+tupleIdStart*nbOfComp;
- if(tupleIdStart+nbOfTupleToWrite>thisNt)
- throw INTERP_KERNEL::Exception("DataArrayInt::setContigPartOfSelectedValues2 : invalid number range of values to write !");
- if(end2>aNt)
- throw INTERP_KERNEL::Exception("DataArrayInt::setContigPartOfSelectedValues2 : invalid range of values to read !");
- const int *valsSrc=a->getConstPointer()+bg*nbOfComp;
- for(int i=0;i<nbOfTupleToWrite;i++,valsToSet+=nbOfComp,valsSrc+=step*nbOfComp)
- {
- std::copy(valsSrc,valsSrc+nbOfComp,valsToSet);
- }
-}
-
-/*!
- * Returns a value located at specified tuple and component.
- * This method is equivalent to DataArrayInt::getIJ() except that validity of
- * parameters is checked. So this method is safe but expensive if used to go through
- * all values of \a this.
- * \param [in] tupleId - index of tuple of interest.
- * \param [in] compoId - index of component of interest.
- * \return double - value located by \a tupleId and \a compoId.
- * \throw If \a this is not allocated.
- * \throw If condition <em>( 0 <= tupleId < this->getNumberOfTuples() )</em> is violated.
- * \throw If condition <em>( 0 <= compoId < this->getNumberOfComponents() )</em> is violated.
- */
-int DataArrayInt::getIJSafe(int tupleId, int compoId) const
-{
- checkAllocated();
- if(tupleId<0 || tupleId>=getNumberOfTuples())
- {
- std::ostringstream oss; oss << "DataArrayInt::getIJSafe : request for tupleId " << tupleId << " should be in [0," << getNumberOfTuples() << ") !";
- throw INTERP_KERNEL::Exception(oss.str().c_str());
- }
- if(compoId<0 || compoId>=getNumberOfComponents())