- ## @addtogroup l4_advanced
- ## @{
-
- ## Create a T-shape object with specified caracteristics for the main
- # and the incident pipes (radius, width, half-length).
- # The extremities of the main pipe are located on junctions points P1 and P2.
- # The extremity of the incident pipe is located on junction point P3.
- # If P1, P2 and P3 are not given, the center of the shape is (0,0,0) and
- # the main plane of the T-shape is XOY.
- #
- # @param theR1 Internal radius of main pipe
- # @param theW1 Width of main pipe
- # @param theL1 Half-length of main pipe
- # @param theR2 Internal radius of incident pipe (R2 < R1)
- # @param theW2 Width of incident pipe (R2+W2 < R1+W1)
- # @param theL2 Half-length of incident pipe
- #
- # @param theHexMesh Boolean indicating if shape is prepared for hex mesh (default=True)
- # @param theP1 1st junction point of main pipe
- # @param theP2 2nd junction point of main pipe
- # @param theP3 Junction point of incident pipe
- #
- # @param theRL Internal radius of left thickness reduction
- # @param theWL Width of left thickness reduction
- # @param theLtransL Length of left transition part
- # @param theLthinL Length of left thin part
- #
- # @param theRR Internal radius of right thickness reduction
- # @param theWR Width of right thickness reduction
- # @param theLtransR Length of right transition part
- # @param theLthinR Length of right thin part
- #
- # @param theRI Internal radius of incident thickness reduction
- # @param theWI Width of incident thickness reduction
- # @param theLtransI Length of incident transition part
- # @param theLthinI Length of incident thin part
- #
- # @param theName Object name; when specified, this parameter is used
- # for result publication in the study. Otherwise, if automatic
- # publication is switched on, default value is used for result name.
- #
- # @return List of GEOM.GEOM_Object, containing the created shape and propagation groups.
- #
- # @ref tui_creation_pipetshape "Example"
- @ManageTransactions("AdvOp")
- def MakePipeTShape (self, theR1, theW1, theL1, theR2, theW2, theL2,
- theHexMesh=True, theP1=None, theP2=None, theP3=None,
- theRL=0, theWL=0, theLtransL=0, theLthinL=0,
- theRR=0, theWR=0, theLtransR=0, theLthinR=0,
- theRI=0, theWI=0, theLtransI=0, theLthinI=0,
- theName=None):
- """
- Create a T-shape object with specified caracteristics for the main
- and the incident pipes (radius, width, half-length).
- The extremities of the main pipe are located on junctions points P1 and P2.
- The extremity of the incident pipe is located on junction point P3.
- If P1, P2 and P3 are not given, the center of the shape is (0,0,0) and
- the main plane of the T-shape is XOY.
-
- Parameters:
- theR1 Internal radius of main pipe
- theW1 Width of main pipe
- theL1 Half-length of main pipe
- theR2 Internal radius of incident pipe (R2 < R1)
- theW2 Width of incident pipe (R2+W2 < R1+W1)
- theL2 Half-length of incident pipe
- theHexMesh Boolean indicating if shape is prepared for hex mesh (default=True)
- theP1 1st junction point of main pipe
- theP2 2nd junction point of main pipe
- theP3 Junction point of incident pipe
-
- theRL Internal radius of left thickness reduction
- theWL Width of left thickness reduction
- theLtransL Length of left transition part
- theLthinL Length of left thin part
-
- theRR Internal radius of right thickness reduction
- theWR Width of right thickness reduction
- theLtransR Length of right transition part
- theLthinR Length of right thin part
-
- theRI Internal radius of incident thickness reduction
- theWI Width of incident thickness reduction
- theLtransI Length of incident transition part
- theLthinI Length of incident thin part
-
- theName Object name; when specified, this parameter is used
- for result publication in the study. Otherwise, if automatic
- publication is switched on, default value is used for result name.
-
- Returns:
- List of GEOM_Object, containing the created shape and propagation groups.
-
- Example of usage:
- # create PipeTShape object
- pipetshape = geompy.MakePipeTShape(80.0, 20.0, 200.0, 50.0, 20.0, 200.0)
- # create PipeTShape object with position
- pipetshape_position = geompy.MakePipeTShape(80.0, 20.0, 200.0, 50.0, 20.0, 200.0, True, P1, P2, P3)
- # create PipeTShape object with left thickness reduction
- pipetshape_thr = geompy.MakePipeTShape(80.0, 20.0, 200.0, 50.0, 20.0, 200.0, theRL=60, theWL=20, theLtransL=40, theLthinL=20)
- """
- theR1, theW1, theL1, theR2, theW2, theL2, theRL, theWL, theLtransL, theLthinL, theRR, theWR, theLtransR, theLthinR, theRI, theWI, theLtransI, theLthinI, Parameters = ParseParameters(theR1, theW1, theL1, theR2, theW2, theL2, theRL, theWL, theLtransL, theLthinL, theRR, theWR, theLtransR, theLthinR, theRI, theWI, theLtransI, theLthinI)
- if (theP1 and theP2 and theP3):
- anObj = self.AdvOp.MakePipeTShapeTRWithPosition(theR1, theW1, theL1, theR2, theW2, theL2,
- theRL, theWL, theLtransL, theLthinL,
- theRR, theWR, theLtransR, theLthinR,
- theRI, theWI, theLtransI, theLthinI,
- theHexMesh, theP1, theP2, theP3)
- else:
- anObj = self.AdvOp.MakePipeTShapeTR(theR1, theW1, theL1, theR2, theW2, theL2,
- theRL, theWL, theLtransL, theLthinL,
- theRR, theWR, theLtransR, theLthinR,
- theRI, theWI, theLtransI, theLthinI,
- theHexMesh)
- RaiseIfFailed("MakePipeTShape", self.AdvOp)
- if Parameters: anObj[0].SetParameters(Parameters)
- def_names = [ "pipeTShape" ] + [ "pipeTShape_grp_%d" % i for i in range(1, len(anObj)) ]
- self._autoPublish(anObj, _toListOfNames(theName, len(anObj)), def_names)
- return anObj
-
- ## Create a T-shape object with chamfer and with specified caracteristics for the main
- # and the incident pipes (radius, width, half-length). The chamfer is
- # created on the junction of the pipes.
- # The extremities of the main pipe are located on junctions points P1 and P2.
- # The extremity of the incident pipe is located on junction point P3.
- # If P1, P2 and P3 are not given, the center of the shape is (0,0,0) and
- # the main plane of the T-shape is XOY.
- # @param theR1 Internal radius of main pipe
- # @param theW1 Width of main pipe
- # @param theL1 Half-length of main pipe
- # @param theR2 Internal radius of incident pipe (R2 < R1)
- # @param theW2 Width of incident pipe (R2+W2 < R1+W1)
- # @param theL2 Half-length of incident pipe
- # @param theH Height of the chamfer.
- # @param theW Width of the chamfer.
- # @param theHexMesh Boolean indicating if shape is prepared for hex mesh (default=True)
- # @param theP1 1st junction point of main pipe
- # @param theP2 2nd junction point of main pipe
- # @param theP3 Junction point of incident pipe
- #
- # @param theRL Internal radius of left thickness reduction
- # @param theWL Width of left thickness reduction
- # @param theLtransL Length of left transition part
- # @param theLthinL Length of left thin part
- #
- # @param theRR Internal radius of right thickness reduction
- # @param theWR Width of right thickness reduction
- # @param theLtransR Length of right transition part
- # @param theLthinR Length of right thin part
- #
- # @param theRI Internal radius of incident thickness reduction
- # @param theWI Width of incident thickness reduction
- # @param theLtransI Length of incident transition part
- # @param theLthinI Length of incident thin part
- #
- # @param theName Object name; when specified, this parameter is used
- # for result publication in the study. Otherwise, if automatic
- # publication is switched on, default value is used for result name.
- #
- # @return List of GEOM.GEOM_Object, containing the created shape and propagation groups.
- #
- # @ref tui_creation_pipetshape "Example"
- @ManageTransactions("AdvOp")
- def MakePipeTShapeChamfer (self, theR1, theW1, theL1, theR2, theW2, theL2,
- theH, theW, theHexMesh=True, theP1=None, theP2=None, theP3=None,
- theRL=0, theWL=0, theLtransL=0, theLthinL=0,
- theRR=0, theWR=0, theLtransR=0, theLthinR=0,
- theRI=0, theWI=0, theLtransI=0, theLthinI=0,
- theName=None):
- """
- Create a T-shape object with chamfer and with specified caracteristics for the main
- and the incident pipes (radius, width, half-length). The chamfer is
- created on the junction of the pipes.
- The extremities of the main pipe are located on junctions points P1 and P2.
- The extremity of the incident pipe is located on junction point P3.
- If P1, P2 and P3 are not given, the center of the shape is (0,0,0) and
- the main plane of the T-shape is XOY.
-
- Parameters:
- theR1 Internal radius of main pipe
- theW1 Width of main pipe
- theL1 Half-length of main pipe
- theR2 Internal radius of incident pipe (R2 < R1)
- theW2 Width of incident pipe (R2+W2 < R1+W1)
- theL2 Half-length of incident pipe
- theH Height of the chamfer.
- theW Width of the chamfer.
- theHexMesh Boolean indicating if shape is prepared for hex mesh (default=True)
- theP1 1st junction point of main pipe
- theP2 2nd junction point of main pipe
- theP3 Junction point of incident pipe
-
- theRL Internal radius of left thickness reduction
- theWL Width of left thickness reduction
- theLtransL Length of left transition part
- theLthinL Length of left thin part
-
- theRR Internal radius of right thickness reduction
- theWR Width of right thickness reduction
- theLtransR Length of right transition part
- theLthinR Length of right thin part
-
- theRI Internal radius of incident thickness reduction
- theWI Width of incident thickness reduction
- theLtransI Length of incident transition part
- theLthinI Length of incident thin part
-
- theName Object name; when specified, this parameter is used
- for result publication in the study. Otherwise, if automatic
- publication is switched on, default value is used for result name.
-
- Returns:
- List of GEOM_Object, containing the created shape and propagation groups.
-
- Example of usage:
- # create PipeTShape with chamfer object
- pipetshapechamfer = geompy.MakePipeTShapeChamfer(80.0, 20.0, 200.0, 50.0, 20.0, 200.0, 20.0, 20.0)
- # create PipeTShape with chamfer object with position
- pipetshapechamfer_position = geompy.MakePipeTShapeChamfer(80.0, 20.0, 200.0, 50.0, 20.0, 200.0, 20.0, 20.0, True, P1, P2, P3)
- # create PipeTShape with chamfer object with left thickness reduction
- pipetshapechamfer_thr = geompy.MakePipeTShapeChamfer(80.0, 20.0, 200.0, 50.0, 20.0, 200.0, 20.0, 20.0, theRL=60, theWL=20, theLtransL=40, theLthinL=20)
- """
- theR1, theW1, theL1, theR2, theW2, theL2, theH, theW, theRL, theWL, theLtransL, theLthinL, theRR, theWR, theLtransR, theLthinR, theRI, theWI, theLtransI, theLthinI, Parameters = ParseParameters(theR1, theW1, theL1, theR2, theW2, theL2, theH, theW, theRL, theWL, theLtransL, theLthinL, theRR, theWR, theLtransR, theLthinR, theRI, theWI, theLtransI, theLthinI)
- if (theP1 and theP2 and theP3):
- anObj = self.AdvOp.MakePipeTShapeTRChamferWithPosition(theR1, theW1, theL1, theR2, theW2, theL2,
- theRL, theWL, theLtransL, theLthinL,
- theRR, theWR, theLtransR, theLthinR,
- theRI, theWI, theLtransI, theLthinI,
- theH, theW, theHexMesh, theP1, theP2, theP3)
- else:
- anObj = self.AdvOp.MakePipeTShapeTRChamfer(theR1, theW1, theL1, theR2, theW2, theL2,
- theRL, theWL, theLtransL, theLthinL,
- theRR, theWR, theLtransR, theLthinR,
- theRI, theWI, theLtransI, theLthinI,
- theH, theW, theHexMesh)
- RaiseIfFailed("MakePipeTShapeChamfer", self.AdvOp)
- if Parameters: anObj[0].SetParameters(Parameters)
- def_names = [ "pipeTShape" ] + [ "pipeTShape_grp_%d" % i for i in range(1, len(anObj)) ]
- self._autoPublish(anObj, _toListOfNames(theName, len(anObj)), def_names)
- return anObj
-
- ## Create a T-shape object with fillet and with specified caracteristics for the main
- # and the incident pipes (radius, width, half-length). The fillet is
- # created on the junction of the pipes.
- # The extremities of the main pipe are located on junctions points P1 and P2.
- # The extremity of the incident pipe is located on junction point P3.
- # If P1, P2 and P3 are not given, the center of the shape is (0,0,0) and
- # the main plane of the T-shape is XOY.
- # @param theR1 Internal radius of main pipe
- # @param theW1 Width of main pipe
- # @param theL1 Half-length of main pipe
- # @param theR2 Internal radius of incident pipe (R2 < R1)
- # @param theW2 Width of incident pipe (R2+W2 < R1+W1)
- # @param theL2 Half-length of incident pipe
- # @param theRF Radius of curvature of fillet.
- # @param theHexMesh Boolean indicating if shape is prepared for hex mesh (default=True)
- # @param theP1 1st junction point of main pipe
- # @param theP2 2nd junction point of main pipe
- # @param theP3 Junction point of incident pipe
- #
- # @param theRL Internal radius of left thickness reduction
- # @param theWL Width of left thickness reduction
- # @param theLtransL Length of left transition part
- # @param theLthinL Length of left thin part
- #
- # @param theRR Internal radius of right thickness reduction
- # @param theWR Width of right thickness reduction
- # @param theLtransR Length of right transition part
- # @param theLthinR Length of right thin part
- #
- # @param theRI Internal radius of incident thickness reduction
- # @param theWI Width of incident thickness reduction
- # @param theLtransI Length of incident transition part
- # @param theLthinI Length of incident thin part
- #
- # @param theName Object name; when specified, this parameter is used
- # for result publication in the study. Otherwise, if automatic
- # publication is switched on, default value is used for result name.
- #
- # @return List of GEOM.GEOM_Object, containing the created shape and propagation groups.
- #
- # @ref tui_creation_pipetshape "Example"
- @ManageTransactions("AdvOp")
- def MakePipeTShapeFillet (self, theR1, theW1, theL1, theR2, theW2, theL2,
- theRF, theHexMesh=True, theP1=None, theP2=None, theP3=None,
- theRL=0, theWL=0, theLtransL=0, theLthinL=0,
- theRR=0, theWR=0, theLtransR=0, theLthinR=0,
- theRI=0, theWI=0, theLtransI=0, theLthinI=0,
- theName=None):
- """
- Create a T-shape object with fillet and with specified caracteristics for the main
- and the incident pipes (radius, width, half-length). The fillet is
- created on the junction of the pipes.
- The extremities of the main pipe are located on junctions points P1 and P2.
- The extremity of the incident pipe is located on junction point P3.
-
- Parameters:
- If P1, P2 and P3 are not given, the center of the shape is (0,0,0) and
- the main plane of the T-shape is XOY.
- theR1 Internal radius of main pipe
- theW1 Width of main pipe
- heL1 Half-length of main pipe
- theR2 Internal radius of incident pipe (R2 < R1)
- theW2 Width of incident pipe (R2+W2 < R1+W1)
- theL2 Half-length of incident pipe
- theRF Radius of curvature of fillet.
- theHexMesh Boolean indicating if shape is prepared for hex mesh (default=True)
- theP1 1st junction point of main pipe
- theP2 2nd junction point of main pipe
- theP3 Junction point of incident pipe
-
- theRL Internal radius of left thickness reduction
- theWL Width of left thickness reduction
- theLtransL Length of left transition part
- theLthinL Length of left thin part
-
- theRR Internal radius of right thickness reduction
- theWR Width of right thickness reduction
- theLtransR Length of right transition part
- theLthinR Length of right thin part
-
- theRI Internal radius of incident thickness reduction
- theWI Width of incident thickness reduction
- theLtransI Length of incident transition part
- theLthinI Length of incident thin part
-
- theName Object name; when specified, this parameter is used
- for result publication in the study. Otherwise, if automatic
- publication is switched on, default value is used for result name.
-
- Returns:
- List of GEOM_Object, containing the created shape and propagation groups.
-
- Example of usage:
- # create PipeTShape with fillet object
- pipetshapefillet = geompy.MakePipeTShapeFillet(80.0, 20.0, 200.0, 50.0, 20.0, 200.0, 5.0)
- # create PipeTShape with fillet object with position
- pipetshapefillet_position = geompy.MakePipeTShapeFillet(80.0, 20.0, 200.0, 50.0, 20.0, 200.0, 5.0, True, P1, P2, P3)
- # create PipeTShape with fillet object with left thickness reduction
- pipetshapefillet_thr = geompy.MakePipeTShapeFillet(80.0, 20.0, 200.0, 50.0, 20.0, 200.0, 5.0, theRL=60, theWL=20, theLtransL=40, theLthinL=20)
- """
- theR1, theW1, theL1, theR2, theW2, theL2, theRF, theRL, theWL, theLtransL, theLthinL, theRR, theWR, theLtransR, theLthinR, theRI, theWI, theLtransI, theLthinI, Parameters = ParseParameters(theR1, theW1, theL1, theR2, theW2, theL2, theRF, theRL, theWL, theLtransL, theLthinL, theRR, theWR, theLtransR, theLthinR, theRI, theWI, theLtransI, theLthinI)
- if (theP1 and theP2 and theP3):
- anObj = self.AdvOp.MakePipeTShapeTRFilletWithPosition(theR1, theW1, theL1, theR2, theW2, theL2,
- theRL, theWL, theLtransL, theLthinL,
- theRR, theWR, theLtransR, theLthinR,
- theRI, theWI, theLtransI, theLthinI,
- theRF, theHexMesh, theP1, theP2, theP3)
- else:
- anObj = self.AdvOp.MakePipeTShapeTRFillet(theR1, theW1, theL1, theR2, theW2, theL2,
- theRL, theWL, theLtransL, theLthinL,
- theRR, theWR, theLtransR, theLthinR,
- theRI, theWI, theLtransI, theLthinI,
- theRF, theHexMesh)
- RaiseIfFailed("MakePipeTShapeFillet", self.AdvOp)
- if Parameters: anObj[0].SetParameters(Parameters)
- def_names = [ "pipeTShape" ] + [ "pipeTShape_grp_%d" % i for i in range(1, len(anObj)) ]
- self._autoPublish(anObj, _toListOfNames(theName, len(anObj)), def_names)
- return anObj
-
- ## This function allows creating a disk already divided into blocks. It
- # can be used to create divided pipes for later meshing in hexaedra.
- # @param theR Radius of the disk
- # @param theOrientation Orientation of the plane on which the disk will be built
- # 1 = XOY, 2 = OYZ, 3 = OZX
- # @param thePattern Division pattern. It can be GEOM.SQUARE or GEOM.HEXAGON
- # @param theName Object name; when specified, this parameter is used
- # for result publication in the study. Otherwise, if automatic
- # publication is switched on, default value is used for result name.
- #
- # @return New GEOM_Object, containing the created shape.
- #
- # @ref tui_creation_divideddisk "Example"
- @ManageTransactions("AdvOp")
- def MakeDividedDisk(self, theR, theOrientation, thePattern, theName=None):
- """
- Creates a disk, divided into blocks. It can be used to create divided pipes
- for later meshing in hexaedra.
-
- Parameters:
- theR Radius of the disk
- theOrientation Orientation of the plane on which the disk will be built:
- 1 = XOY, 2 = OYZ, 3 = OZX
- thePattern Division pattern. It can be GEOM.SQUARE or GEOM.HEXAGON
- theName Object name; when specified, this parameter is used
- for result publication in the study. Otherwise, if automatic
- publication is switched on, default value is used for result name.
-
- Returns:
- New GEOM_Object, containing the created shape.
- """
- theR, Parameters = ParseParameters(theR)
- anObj = self.AdvOp.MakeDividedDisk(theR, 67.0, theOrientation, thePattern)
- RaiseIfFailed("MakeDividedDisk", self.AdvOp)
- if Parameters: anObj.SetParameters(Parameters)
- self._autoPublish(anObj, theName, "dividedDisk")
- return anObj
-
- ## This function allows creating a disk already divided into blocks. It
- # can be used to create divided pipes for later meshing in hexaedra.
- # @param theCenter Center of the disk
- # @param theVector Normal vector to the plane of the created disk
- # @param theRadius Radius of the disk
- # @param thePattern Division pattern. It can be GEOM.SQUARE or GEOM.HEXAGON
- # @param theName Object name; when specified, this parameter is used
- # for result publication in the study. Otherwise, if automatic
- # publication is switched on, default value is used for result name.
- #
- # @return New GEOM_Object, containing the created shape.
- #
- # @ref tui_creation_divideddisk "Example"
- @ManageTransactions("AdvOp")
- def MakeDividedDiskPntVecR(self, theCenter, theVector, theRadius, thePattern, theName=None):
- """
- Creates a disk already divided into blocks. It can be used to create divided pipes
- for later meshing in hexaedra.
-
- Parameters:
- theCenter Center of the disk
- theVector Normal vector to the plane of the created disk
- theRadius Radius of the disk
- thePattern Division pattern. It can be GEOM.SQUARE or GEOM.HEXAGON
- theName Object name; when specified, this parameter is used
- for result publication in the study. Otherwise, if automatic
- publication is switched on, default value is used for result name.
-
- Returns:
- New GEOM_Object, containing the created shape.
- """
- theRadius, Parameters = ParseParameters(theRadius)
- anObj = self.AdvOp.MakeDividedDiskPntVecR(theCenter, theVector, theRadius, 67.0, thePattern)
- RaiseIfFailed("MakeDividedDiskPntVecR", self.AdvOp)
- if Parameters: anObj.SetParameters(Parameters)
- self._autoPublish(anObj, theName, "dividedDisk")
- return anObj
-
- ## Builds a cylinder prepared for hexa meshes
- # @param theR Radius of the cylinder
- # @param theH Height of the cylinder
- # @param thePattern Division pattern. It can be GEOM.SQUARE or GEOM.HEXAGON
- # @param theName Object name; when specified, this parameter is used
- # for result publication in the study. Otherwise, if automatic
- # publication is switched on, default value is used for result name.
- #
- # @return New GEOM_Object, containing the created shape.
- #
- # @ref tui_creation_dividedcylinder "Example"
- @ManageTransactions("AdvOp")
- def MakeDividedCylinder(self, theR, theH, thePattern, theName=None):
- """
- Builds a cylinder prepared for hexa meshes
-
- Parameters:
- theR Radius of the cylinder
- theH Height of the cylinder
- thePattern Division pattern. It can be GEOM.SQUARE or GEOM.HEXAGON
- theName Object name; when specified, this parameter is used
- for result publication in the study. Otherwise, if automatic
- publication is switched on, default value is used for result name.
-
- Returns:
- New GEOM_Object, containing the created shape.
- """
- theR, theH, Parameters = ParseParameters(theR, theH)
- anObj = self.AdvOp.MakeDividedCylinder(theR, theH, thePattern)
- RaiseIfFailed("MakeDividedCylinder", self.AdvOp)
- if Parameters: anObj.SetParameters(Parameters)
- self._autoPublish(anObj, theName, "dividedCylinder")
- return anObj
-
- ## Create a surface from a cloud of points
- # @param thelPoints list of points. Compounds of points are
- # accepted as well.
- # @param theNbMax maximum number of Bezier pieces in the resulting
- # surface.
- # @param theDegMax maximum degree of the resulting BSpline surface.
- # @param theDMax 3D tolerance of initial approximation.
- # @param theName Object name; when specified, this parameter is used
- # for result publication in the study. Otherwise, if automatic
- # publication is switched on, default value is used for result name.
- # @return New GEOM_Object, containing the created shape.
- # @note 3D tolerance of initial approximation represents a tolerance of
- # initial plate surface approximation. If this parameter is equal
- # to 0 (default value) it is computed. In this case an error of
- # initial plate surface computation is used as the approximation
- # tolerance. This error represents a maximal distance between
- # computed plate surface and given points.
- #
- # @ref tui_creation_smoothingsurface "Example"
- @ManageTransactions("AdvOp")
- def MakeSmoothingSurface(self, thelPoints, theNbMax=2, theDegMax=8,
- theDMax=0.0, theName=None):
- """
- Create a surface from a cloud of points
-
- Parameters:
- thelPoints list of points. Compounds of points are
- accepted as well.
- theNbMax maximum number of Bezier pieces in the resulting
- surface.
- theDegMax maximum degree of the resulting BSpline surface.
- theDMax 3D tolerance of initial approximation.
- theName Object name; when specified, this parameter is used
- for result publication in the study. Otherwise, if automatic
- publication is switched on, default value is used for result name.
-
- Returns:
- New GEOM_Object, containing the created shape.
-
- Note:
- 3D tolerance of initial approximation represents a tolerance of
- initial plate surface approximation. If this parameter is equal
- to 0 (default value) it is computed. In this case an error of
- initial plate surface computation is used as the approximation
- tolerance. This error represents a maximal distance between
- computed plate surface and given points.
- """
- anObj = self.AdvOp.MakeSmoothingSurface(thelPoints, theNbMax,
- theDegMax, theDMax)
- RaiseIfFailed("MakeSmoothingSurface", self.AdvOp)
- self._autoPublish(anObj, theName, "smoothing")
- return anObj
-
- ## Export a shape to XAO format
- # @param shape The shape to export
- # @param groups The list of groups to export
- # @param fields The list of fields to export
- # @param author The author of the export
- # @param fileName The name of the file to export
- # @return boolean
- #
- # @ref tui_exportxao "Example"
- @ManageTransactions("InsertOp")
- def ExportXAO(self, shape, groups, fields, author, fileName):
- res = self.InsertOp.ExportXAO(shape, groups, fields, author, fileName)
- RaiseIfFailed("ExportXAO", self.InsertOp)
- return res
-
- ## Import a shape from XAO format
- # @param shape Shape to export
- # @param fileName The name of the file to import
- # @return tuple (res, shape, subShapes, groups, fields)
- # res Flag indicating if the import was successful
- # shape The imported shape
- # subShapes The list of imported subShapes
- # groups The list of imported groups
- # fields The list of imported fields
- #
- # @ref tui_importxao "Example"
- @ManageTransactions("InsertOp")
- def ImportXAO(self, fileName):
- res = self.InsertOp.ImportXAO(fileName)
- RaiseIfFailed("ImportXAO", self.InsertOp)
- return res
-
