+ <source>GeomValidators_ZeroOffset: FromSize = -ToSize and bounding planes are coincident.</source>
+ <translation>FromSize = -ToSize and bounding planes are coincident.</translation>
+ </message>
+ <message>
+ <source>Model_FeatureValidator: Attribute "base" is not initialized.</source>
+ <translation>Base object for extrusion is not selected.</translation>
+ </message>
+ <message>
+ <source>main_objects - GeomValidators_ShapeType: It does not contain element with acceptable shape type. The type should be one of the next: </source>
+ <translation>Selected objects contain element with unacceptable shape type.</translation>
+ </message>
+ <message>
+ <source>sketch - FeaturesPlugin_ValidatorCompositeLauncher: The object is empty</source>
+ <translation>Object is not selected.</translation>
+ </message>
+ <message>
+ <source>sketch - FeaturesPlugin_ValidatorCompositeLauncher: The result is empty</source>
+ <translation>Object is not selected.</translation>
+ </message>
+
+ <message>
+ <source>FeaturesPlugin_ValidatorExtrusionDir: Error: Validator should be used with 2 parameters for extrusion.</source>
+ <translation>Validator "FeaturesPlugin_ValidatorExtrusionDir" should be used with 2 parameters for extrusion.</translation>
+ </message>
+ <message>
+ <source>FeaturesPlugin_ValidatorExtrusionDir: Error: Base objects list contains vertex or edge, so attribute \"%1\" can not be used with default value. Select direction for extrusion.</source>
+ <translation>Base objects list contains vertex or edge, so attribute "%1" can not be used with default value. Select direction for extrusion.</translation>
+ </message>
+ <message>
+ <source>FeaturesPlugin_ValidatorExtrusionDir: Error: Direction is parallel to one of the selected face or face on selected shell.</source>
+ <translation>Direction is parallel to one of the selected face or face on selected shell.</translation>
+ </message>
+
+ <message>
+ <source>Model_FeatureValidator: Attribute "sketch" is not initialized.</source>
+ <translation>Base object for extrusion is not selected.</translation>
+ </message>
+ <message>
+ <source>Model_FeatureValidator: Attribute "direction_object" is not initialized.</source>
+ <translation>Direction object for extrusion is not selected.</translation>
+ </message>
+ <message>
+ <source>Model_FeatureValidator: Attribute "to_size" is not initialized.</source>
+ <translation></translation>
+ </message>
+ <message>
+ <source>Model_FeatureValidator: Attribute "from_size" is not initialized.</source>
+ <translation></translation>
+ </message>
+ <message>
+ <source>Model_FeatureValidator: Attribute "from_object" is not initialized.</source>
+ <translation>From object for extrusion is not selected.</translation>
+ </message>
+ <message>
+ <source>Model_FeatureValidator: Attribute "from_offset" is not initialized.</source>
+ <translation></translation>
+ </message>
+ <message>
+ <source>Model_FeatureValidator: Attribute "to_object" is not initialized.</source>
+ <translation>To object for extrusion is not selected.</translation>
+ </message>
+ <message>
+ <source>Model_FeatureValidator: Attribute "to_offset" is not initialized.</source>
+ <translation></translation>
+ </message>
+ <message>
+ <source>Model_FeatureValidator: Attribute "main_objects" is not initialized.</source>
+ <translation>Objects for cut are not selected.</translation>
+ </message>
+ <message>
+ <source>sketch - FeaturesPlugin_ValidatorCompositeLauncher: Error: The attribute with the %1 type is not processed</source>
+ <translation></translation>
+ </message>
+ <message>
+ <source>sketch - FeaturesPlugin_ValidatorCompositeLauncher: Error: Wrong parameters in XML definition for %1 type</source>
+ <translation></translation>
+ </message>
+ <message>
+ <source>sketch - FeaturesPlugin_ValidatorCompositeLauncher: Wrong parameters in XML definition for %1 type</source>
+ <translation></translation>
+ </message>
+ <message>
+ <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Validator parameters is empty.</source>
+ <translation></translation>
+ </message>
+ <message>
+ <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Attribute contains unacceptable shape.</source>
+ <translation>Shape with unacceptable type selected.</translation>
+ </message>
+ <message>
+ <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Empty context.</source>
+ <translation></translation>
+ </message>
+ <message>
+ <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Compound should contain only faces and edges.</source>
+ <translation>Compound should contain only faces and edges.</translation>
+ </message>
+ <message>
+ <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Object from this sketch is already selected. Sketch is not allowed for selection.</source>
+ <translation>Object from this sketch is already selected. Sketch is not allowed for selection.</translation>
+ </message>
+ <message>
+ <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Whole sketch with this object is already selected. Don't allow to select this object.</source>
+ <translation>Whole sketch with this object is already selected. Don't allow to select this object.</translation>
+ </message>
+ <message>
+ <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Wire with wrong orientation selected.</source>
+ <translation>Wire with wrong orientation selected.</translation>
+ </message>
+ <message>
+ <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Objects with such wire already selected. Don't allow to select this object.</source>
+ <translation>Objects with such wire already selected. Don't allow to select this object.</translation>
+ </message>
+ <message>
+ <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Empty attribute.</source>
+ <translation></translation>
+ </message>
+ <message>
+ <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Attribute have empty context.</source>
+ <translation></translation>
+ </message>
+ <message>
+ <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Empty shape selected</source>
+ <translation></translation>
+ </message>
+ <message>
+ <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Infinite constructions is not allowed as base.</source>
+ <translation>Infinite constructions is not allowed as base.</translation>
+ </message>
+ <message>
+ <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Selected shape is in the local selection. Only global selection is allowed.</source>
+ <translation>Selected shape is in the local selection. Only global selection is allowed.</translation>
+ </message>
+ <message>
+ <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Selected shape has unacceptable type. Acceptable types are: faces or wires on sketch, whole sketch(if it has at least one face), and whole objects with shape types: %1</source>
+ <translation>Selected shape has unacceptable type. Acceptable types are: faces or wires on sketch, whole sketch(if it has at least one face), and whole objects with shape types: %1</translation>
+ </message>
+ <message>
+ <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Attribute \"%1\" does not supported by this validator.</source>
+ <translation></translation>
+ </message>
+ <message>
+ <source>direction_object - GeomValidators_ShapeType: It does not contain element with acceptable shape type. The type should be one of the next: %1</source>
+ <translation>It does not contain element with acceptable shape type. The type should be one of the next: %1</translation>
+ </message>
+ <message>
+ <source>direction_object - GeomValidators_ShapeType: It has reference to an empty attribute</source>
+ <translation></translation>
+ </message>
+ <message>
+ <source>direction_object - GeomValidators_ShapeType: Shape type is \"%1\", it should be \"%2\"</source>
+ <translation>Shape type is "%1", it should be "%2"</translation>
+ </message>
+ <message>
+ <source>direction_object - GeomValidators_ShapeType: The attribute with the %1 type is not processed</source>
+ <translation></translation>
+ </message>
+ <message>
+ <source>direction_object - GeomValidators_ShapeType: The object is empty</source>
+ <translation></translation>
+ </message>
+ <message>
+ <source>direction_object - GeomValidators_ShapeType: The result is empty</source>
+ <translation></translation>
+ </message>
+ <message>
+ <source>direction_object - GeomValidators_ShapeType: The shape is empty</source>
+ <translation></translation>
+ </message>
+ <message>
+ <source>from_object - GeomValidators_Face: The attribute with the %1 type is not processed</source>
+ <translation></translation>
+ </message>
+ <message>
+ <source>from_object - GeomValidators_Face: The shape is not a face.</source>
+ <translation>"From" should be a planar face.</translation>
+ </message>
+ <message>
+ <source>from_object - GeomValidators_Face: The shape is not a face.</source>
+ <translation>"From" should be a planar face.</translation>
+ </message>
+ <message>
+ <source>from_object - GeomValidators_Face: The shape is not a plane.</source>
+ <translation>"From" should be a planar face.</translation>
+ </message>
+ <message>
+ <source>from_object - GeomValidators_Face: The shape is not a cylinder.</source>
+ <translation></translation>
+ </message>
+ <message>
+ <source>from_object - GeomValidators_Face: The shape is not an available face.</source>
+ <translation></translation>
+ </message>
+ <message>
+ <source>to_object - GeomValidators_Face: The attribute with the %1 type is not processed</source>
+ <translation></translation>
+ </message>
+ <message>
+ <source>to_object - GeomValidators_Face: The shape is not a face.</source>
+ <translation>"To" should be a planar face.</translation>
+ </message>
+ <message>
+ <source>to_object - GeomValidators_Face: The shape is not a face.</source>
+ <translation>"To" should be a planar face.</translation>
+ </message>
+ <message>
+ <source>to_object - GeomValidators_Face: The shape is not a plane.</source>
+ <translation>"To" should be a planar face.</translation>
+ </message>
+ <message>
+ <source>to_object - GeomValidators_Face: The shape is not a cylinder.</source>
+ <translation></translation>
+ </message>
+ <message>
+ <source>to_object - GeomValidators_Face: The shape is not an available face.</source>
+ <translation></translation>
+ </message>
+ <message>
+ <source>main_objects - GeomValidators_ShapeType: It does not contain element with acceptable shape type. The type should be one of the next: %1</source>
+ <translation>It does not contain element with acceptable shape type. The type should be one of the next: %1</translation>
+ </message>
+ <message>
+ <source>main_objects - GeomValidators_ShapeType: It has reference to an empty attribute</source>
+ <translation></translation>
+ </message>
+ <message>
+ <source>main_objects - GeomValidators_ShapeType: Shape type is \"%1\", it should be \"%2\"</source>
+ <translation>Shape type is "%1", it should be "%2"</translation>
+ </message>
+ <message>
+ <source>main_objects - GeomValidators_ShapeType: The attribute with the %1 type is not processed</source>
+ <translation></translation>
+ </message>
+ <message>
+ <source>main_objects - GeomValidators_ShapeType: The object is empty</source>
+ <translation></translation>
+ </message>
+ <message>
+ <source>main_objects - GeomValidators_ShapeType: The result is empty</source>
+ <translation></translation>
+ </message>
+ <message>
+ <source>main_objects - GeomValidators_ShapeType: The shape is empty</source>
+ <translation></translation>
+ </message>
+ <message>
+ <source>GeomValidators_ZeroOffset: Wrong number of validator arguments in xml(expected 9).</source>
+ <translation></translation>
+ </message>
+ <message>
+ <source>GeomValidators_ZeroOffset: ToSize = -FromSize.</source>
+ <translation>ToSize = -FromSize.</translation>
+ </message>
+ <message>
+ <source>GeomValidators_ZeroOffset: From face selection is invalid.</source>
+ <translation>From face selection is invalid.</translation>
+ </message>
+ <message>
+ <source>GeomValidators_ZeroOffset: To face selection is invalid.</source>
+ <translation>To face selection is invalid.</translation>
+ </message>
+ <message>
+ <source>GeomValidators_ZeroOffset: From face selection is invalid.</source>
+ <translation>From face selection is invalid.</translation>
+ </message>
+ <message>
+ <source>GeomValidators_ZeroOffset: To face selection is invalid.</source>
+ <translation>To face selection is invalid.</translation>
+ </message>
+ <message>
+ <source>GeomValidators_ZeroOffset: FromSize = -ToSize and bounding planes are coincident.</source>
+ <translation>FromSize = -ToSize and bounding planes are coincident.</translation>
+ </message>
+ </context>
+
+ <context>
+ <name>Revolution</name>
+ <message>
+ <source>GeomValidators_ZeroOffset: FromSize = -ToSize and bounding planes are coincident.</source>
+ <translation>FromAngle = -ToAngle and bounding planes are coincident.</translation>
+ </message>
+ <message>
+ <source>Model_FeatureValidator: Attribute "axis_object" is not initialized.</source>
+ <translation>Revolution axis is not selected.</translation>
+ </message>
+ <message>
+ <source>axis_object - GeomValidators_ShapeType: The object is empty</source>
+ <translation>Revolution axis is not selected.</translation>
+ </message>
+ <message>
+ <source>sketch - FeaturesPlugin_ValidatorCompositeLauncher: The object is empty</source>
+ <translation>Object is not selected.</translation>
+ </message>
+
+ <message>
+ <source>GeomValidators_ZeroOffset: Wrong number of validator arguments in xml(expected 9).</source>
+ <translation>Wrong number of validator "GeomValidators_ZeroOffset" arguments in xml(expected 9).</translation>
+ </message>
+ <message>
+ <source>GeomValidators_ZeroOffset: ToSize = -FromSize.</source>
+ <translation>ToAngle = -FromAngle.</translation>
+ </message>
+ <message>
+ <source>GeomValidators_ZeroOffset: From face selection is invalid.</source>
+ <translation>From face selection is invalid.</translation>
+ </message>
+ <message>
+ <source>GeomValidators_ZeroOffset: To face selection is invalid.</source>
+ <translation>To face selection is invalid.</translation>
+ </message>
+
+ <message>
+ <source>Model_FeatureValidator: Attribute "sketch" is not initialized.</source>
+ <translation>Base object for revolution is not selected.</translation>
+ </message>
+ <message>
+ <source>Model_FeatureValidator: Attribute "base" is not initialized.</source>
+ <translation>Base object for revolution is not selected.</translation>
+ </message>
+ <message>
+ <source>Model_FeatureValidator: Attribute "axis_object" is not initialized.</source>
+ <translation>Axis object for revolution is not selected.</translation>
+ </message>
+ <message>
+ <source>Model_FeatureValidator: Attribute "to_angle" is not initialized.</source>
+ <translation></translation>
+ </message>
+ <message>
+ <source>Model_FeatureValidator: Attribute "from_angle" is not initialized.</source>
+ <translation></translation>
+ </message>
+ <message>
+ <source>Model_FeatureValidator: Attribute "from_object" is not initialized.</source>
+ <translation>From object for revolution is not selected.</translation>
+ </message>
+ <message>
+ <source>Model_FeatureValidator: Attribute "from_offset" is not initialized.</source>
+ <translation></translation>
+ </message>
+ <message>
+ <source>Model_FeatureValidator: Attribute "to_object" is not initialized.</source>
+ <translation>To object for revolution is not selected.</translation>
+ </message>
+ <message>
+ <source>Model_FeatureValidator: Attribute "to_offset" is not initialized.</source>
+ <translation></translation>
+ </message>
+ <message>
+ <source>sketch - FeaturesPlugin_ValidatorCompositeLauncher: Error: The attribute with the %1 type is not processed</source>
+ <translation></translation>
+ </message>
+ <message>
+ <source>sketch - FeaturesPlugin_ValidatorCompositeLauncher: Error: Wrong parameters in XML definition for %1 type</source>
+ <translation></translation>
+ </message>
+ <message>
+ <source>sketch - FeaturesPlugin_ValidatorCompositeLauncher: Wrong parameters in XML definition for %1 type</source>
+ <translation></translation>
+ </message>
+ <message>
+ <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Validator parameters is empty.</source>
+ <translation></translation>
+ </message>
+ <message>
+ <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Attribute contains unacceptable shape.</source>
+ <translation>Shape with unacceptable type selected.</translation>
+ </message>
+ <message>
+ <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Empty context.</source>
+ <translation></translation>
+ </message>
+ <message>
+ <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Compound should contain only faces and edges.</source>
+ <translation>Compound should contain only faces and edges.</translation>
+ </message>
+ <message>
+ <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Object from this sketch is already selected. Sketch is not allowed for selection.</source>
+ <translation>Object from this sketch is already selected. Sketch is not allowed for selection.</translation>
+ </message>
+ <message>
+ <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Whole sketch with this object is already selected. Don't allow to select this object.</source>
+ <translation>Whole sketch with this object is already selected. Don't allow to select this object.</translation>
+ </message>
+ <message>
+ <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Wire with wrong orientation selected.</source>
+ <translation>Wire with wrong orientation selected.</translation>
+ </message>
+ <message>
+ <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Objects with such wire already selected. Don't allow to select this object.</source>
+ <translation>Objects with such wire already selected. Don't allow to select this object.</translation>
+ </message>
+ <message>
+ <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Empty attribute.</source>
+ <translation></translation>
+ </message>
+ <message>
+ <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Attribute have empty context.</source>
+ <translation></translation>
+ </message>
+ <message>
+ <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Empty shape selected</source>
+ <translation></translation>
+ </message>
+ <message>
+ <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Infinite constructions is not allowed as base.</source>
+ <translation>Infinite constructions is not allowed as base.</translation>
+ </message>
+ <message>
+ <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Selected shape is in the local selection. Only global selection is allowed.</source>
+ <translation>Selected shape is in the local selection. Only global selection is allowed.</translation>
+ </message>
+ <message>
+ <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Selected shape has unacceptable type. Acceptable types are: faces or wires on sketch, whole sketch(if it has at least one face), and whole objects with shape types: %1</source>
+ <translation>Selected shape has unacceptable type. Acceptable types are: faces or wires on sketch, whole sketch(if it has at least one face), and whole objects with shape types: %1</translation>
+ </message>
+ <message>
+ <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Attribute \"%1\" does not supported by this validator.</source>
+ <translation></translation>
+ </message>
+ <message>
+ <source>axis_object - GeomValidators_ShapeType: It does not contain element with acceptable shape type. The type should be one of the next: %1</source>
+ <translation>It does not contain element with acceptable shape type. The type should be one of the next: %1</translation>
+ </message>
+ <message>
+ <source>axis_object - GeomValidators_ShapeType: It has reference to an empty attribute</source>
+ <translation></translation>
+ </message>
+ <message>
+ <source>axis_object - GeomValidators_ShapeType: Shape type is \"%1\", it should be \"%2\"</source>
+ <translation>Shape type is "%1", it should be "%2"</translation>
+ </message>
+ <message>
+ <source>axis_object - GeomValidators_ShapeType: The attribute with the %1 type is not processed</source>
+ <translation></translation>
+ </message>
+ <message>
+ <source>axis_object - GeomValidators_ShapeType: The object is empty</source>
+ <translation></translation>
+ </message>
+ <message>
+ <source>axis_object - GeomValidators_ShapeType: The result is empty</source>
+ <translation></translation>
+ </message>
+ <message>
+ <source>axis_object - GeomValidators_ShapeType: The shape is empty</source>
+ <translation></translation>
+ </message>
+ <message>
+ <source>from_object - GeomValidators_Face: The attribute with the %1 type is not processed</source>
+ <translation></translation>
+ </message>
+ <message>
+ <source>from_object - GeomValidators_Face: The shape is not a face.</source>
+ <translation>"From" should be a planar face.</translation>
+ </message>
+ <message>
+ <source>from_object - GeomValidators_Face: The shape is not a face.</source>
+ <translation>"From" should be a planar face.</translation>
+ </message>
+ <message>
+ <source>from_object - GeomValidators_Face: The shape is not a plane.</source>
+ <translation>"From" should be a planar face.</translation>
+ </message>
+ <message>
+ <source>from_object - GeomValidators_Face: The shape is not a cylinder.</source>
+ <translation></translation>
+ </message>
+ <message>
+ <source>from_object - GeomValidators_Face: The shape is not an available face.</source>
+ <translation></translation>
+ </message>
+ <message>
+ <source>to_object - GeomValidators_Face: The attribute with the %1 type is not processed</source>
+ <translation></translation>
+ </message>
+ <message>
+ <source>to_object - GeomValidators_Face: The shape is not a face.</source>
+ <translation>"To" should be a planar face.</translation>
+ </message>
+ <message>
+ <source>to_object - GeomValidators_Face: The shape is not a face.</source>
+ <translation>"To" should be a planar face.</translation>
+ </message>
+ <message>
+ <source>to_object - GeomValidators_Face: The shape is not a plane.</source>
+ <translation>"To" should be a planar face.</translation>
+ </message>
+ <message>
+ <source>to_object - GeomValidators_Face: The shape is not a cylinder.</source>
+ <translation></translation>
+ </message>
+ <message>
+ <source>to_object - GeomValidators_Face: The shape is not an available face.</source>
+ <translation></translation>
+ </message>
+ </context>
+
+ <context>
+ <name>RevolutionCut</name>
+ <message>
+ <source>GeomValidators_ZeroOffset: FromSize = -ToSize and bounding planes are coincident.</source>
+ <translation>FromAngle = -ToAngle and bounding planes are coincident.</translation>
+ </message>
+ <message>
+ <source>Model_FeatureValidator: Attribute "axis_object" is not initialized.</source>
+ <translation>Revolution axis is not selected.</translation>
+ </message>
+ <message>
+ <source>axis_object - GeomValidators_ShapeType: The object is empty</source>
+ <translation>Revolution axis is not selected.</translation>
+ </message>
+ <message>
+ <source>main_objects - GeomValidators_ShapeType: It does not contain element with acceptable shape type. The type should be one of the next: </source>
+ <translation>Selected objects contain element with unacceptable shape type.</translation>
+ </message>
+ <message>
+ <source>sketch - FeaturesPlugin_ValidatorCompositeLauncher: The object is empty</source>
+ <translation>Object is not selected.</translation>
+ </message>
+ <message>
+ <source>sketch - FeaturesPlugin_ValidatorCompositeLauncher: The result is empty</source>
+ <translation>Object is not selected.</translation>
+ </message>
+
+ <message>
+ <source>GeomValidators_ZeroOffset: Wrong number of validator arguments in xml(expected 9).</source>
+ <translation>Wrong number of validator "GeomValidators_ZeroOffset" arguments in xml(expected 9).</translation>
+ </message>
+ <message>
+ <source>GeomValidators_ZeroOffset: ToSize = -FromSize.</source>
+ <translation>ToAngle = -FromAngle.</translation>
+ </message>
+ <message>
+ <source>GeomValidators_ZeroOffset: From face selection is invalid.</source>
+ <translation>From face selection is invalid.</translation>
+ </message>
+ <message>
+ <source>GeomValidators_ZeroOffset: To face selection is invalid.</source>
+ <translation>To face selection is invalid.</translation>
+ </message>
+
+ <message>
+ <source>Model_FeatureValidator: Attribute "sketch" is not initialized.</source>
+ <translation>Base object for revolution is not selected.</translation>
+ </message>
+ <message>
+ <source>Model_FeatureValidator: Attribute "base" is not initialized.</source>
+ <translation>Base object for revolution is not selected.</translation>
+ </message>
+ <message>
+ <source>Model_FeatureValidator: Attribute "axis_object" is not initialized.</source>
+ <translation>Axis object for revolution is not selected.</translation>
+ </message>
+ <message>
+ <source>Model_FeatureValidator: Attribute "to_angle" is not initialized.</source>
+ <translation></translation>
+ </message>
+ <message>
+ <source>Model_FeatureValidator: Attribute "from_angle" is not initialized.</source>
+ <translation></translation>
+ </message>
+ <message>
+ <source>Model_FeatureValidator: Attribute "from_object" is not initialized.</source>
+ <translation>From object for revolution is not selected.</translation>
+ </message>
+ <message>
+ <source>Model_FeatureValidator: Attribute "from_offset" is not initialized.</source>
+ <translation></translation>
+ </message>
+ <message>
+ <source>Model_FeatureValidator: Attribute "to_object" is not initialized.</source>
+ <translation>To object for revolution is not selected.</translation>
+ </message>
+ <message>
+ <source>Model_FeatureValidator: Attribute "to_offset" is not initialized.</source>
+ <translation></translation>
+ </message>
+ <message>
+ <source>Model_FeatureValidator: Attribute "main_objects" is not initialized.</source>
+ <translation>Objects for cut is not selected.</translation>
+ </message>
+ <message>
+ <source>sketch - FeaturesPlugin_ValidatorCompositeLauncher: Error: The attribute with the %1 type is not processed</source>
+ <translation></translation>
+ </message>
+ <message>
+ <source>sketch - FeaturesPlugin_ValidatorCompositeLauncher: Error: Wrong parameters in XML definition for %1 type</source>
+ <translation></translation>
+ </message>
+ <message>
+ <source>sketch - FeaturesPlugin_ValidatorCompositeLauncher: Wrong parameters in XML definition for %1 type</source>
+ <translation></translation>
+ </message>
+ <message>
+ <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Validator parameters is empty.</source>
+ <translation></translation>
+ </message>
+ <message>
+ <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Attribute contains unacceptable shape.</source>
+ <translation>Shape with unacceptable type selected.</translation>
+ </message>
+ <message>
+ <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Empty context.</source>
+ <translation></translation>
+ </message>
+ <message>
+ <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Compound should contain only faces and edges.</source>
+ <translation>Compound should contain only faces and edges.</translation>
+ </message>
+ <message>
+ <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Object from this sketch is already selected. Sketch is not allowed for selection.</source>
+ <translation>Object from this sketch is already selected. Sketch is not allowed for selection.</translation>
+ </message>
+ <message>
+ <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Whole sketch with this object is already selected. Don't allow to select this object.</source>
+ <translation>Whole sketch with this object is already selected. Don't allow to select this object.</translation>
+ </message>
+ <message>
+ <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Wire with wrong orientation selected.</source>
+ <translation>Wire with wrong orientation selected.</translation>
+ </message>
+ <message>
+ <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Objects with such wire already selected. Don't allow to select this object.</source>
+ <translation>Objects with such wire already selected. Don't allow to select this object.</translation>
+ </message>
+ <message>
+ <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Empty attribute.</source>
+ <translation></translation>
+ </message>
+ <message>
+ <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Attribute have empty context.</source>
+ <translation></translation>
+ </message>
+ <message>
+ <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Empty shape selected</source>
+ <translation></translation>
+ </message>
+ <message>
+ <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Infinite constructions is not allowed as base.</source>
+ <translation>Infinite constructions is not allowed as base.</translation>
+ </message>
+ <message>
+ <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Selected shape is in the local selection. Only global selection is allowed.</source>
+ <translation>Selected shape is in the local selection. Only global selection is allowed.</translation>
+ </message>
+ <message>
+ <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Selected shape has unacceptable type. Acceptable types are: faces or wires on sketch, whole sketch(if it has at least one face), and whole objects with shape types: %1</source>
+ <translation>Selected shape has unacceptable type. Acceptable types are: faces or wires on sketch, whole sketch(if it has at least one face), and whole objects with shape types: %1</translation>
+ </message>
+ <message>
+ <source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Attribute \"%1\" does not supported by this validator.</source>
+ <translation></translation>
+ </message>
+ <message>
+ <source>axis_object - GeomValidators_ShapeType: It does not contain element with acceptable shape type. The type should be one of the next: %1</source>
+ <translation>It does not contain element with acceptable shape type. The type should be one of the next: %1</translation>
+ </message>
+ <message>
+ <source>axis_object - GeomValidators_ShapeType: It has reference to an empty attribute</source>
+ <translation></translation>
+ </message>
+ <message>
+ <source>axis_object - GeomValidators_ShapeType: Shape type is \"%1\", it should be \"%2\"</source>
+ <translation>Shape type is "%1", it should be "%2"</translation>
+ </message>
+ <message>
+ <source>axis_object - GeomValidators_ShapeType: The attribute with the %1 type is not processed</source>
+ <translation></translation>
+ </message>
+ <message>
+ <source>axis_object - GeomValidators_ShapeType: The object is empty</source>
+ <translation></translation>
+ </message>
+ <message>
+ <source>axis_object - GeomValidators_ShapeType: The result is empty</source>
+ <translation></translation>
+ </message>
+ <message>
+ <source>axis_object - GeomValidators_ShapeType: The shape is empty</source>
+ <translation></translation>
+ </message>
+ <message>
+ <source>from_object - GeomValidators_Face: The attribute with the %1 type is not processed</source>
+ <translation></translation>
+ </message>
+ <message>
+ <source>from_object - GeomValidators_Face: The shape is not a face.</source>
+ <translation>"From" should be a planar face.</translation>
+ </message>
+ <message>
+ <source>from_object - GeomValidators_Face: The shape is not a face.</source>
+ <translation>"From" should be a planar face.</translation>
+ </message>
+ <message>
+ <source>from_object - GeomValidators_Face: The shape is not a plane.</source>
+ <translation>"From" should be a planar face.</translation>
+ </message>
+ <message>
+ <source>from_object - GeomValidators_Face: The shape is not a cylinder.</source>
+ <translation></translation>
+ </message>
+ <message>
+ <source>from_object - GeomValidators_Face: The shape is not an available face.</source>
+ <translation></translation>
+ </message>
+ <message>
+ <source>to_object - GeomValidators_Face: The attribute with the %1 type is not processed</source>
+ <translation></translation>
+ </message>
+ <message>
+ <source>to_object - GeomValidators_Face: The shape is not a face.</source>
+ <translation>"To" should be a planar face.</translation>
+ </message>
+ <message>
+ <source>to_object - GeomValidators_Face: The shape is not a face.</source>
+ <translation>"To" should be a planar face.</translation>
+ </message>
+ <message>
+ <source>to_object - GeomValidators_Face: The shape is not a plane.</source>
+ <translation>"To" should be a planar face.</translation>
+ </message>
+ <message>
+ <source>to_object - GeomValidators_Face: The shape is not a cylinder.</source>
+ <translation></translation>
+ </message>
+ <message>
+ <source>to_object - GeomValidators_Face: The shape is not an available face.</source>
+ <translation></translation>
+ </message>
+ <message>
+ <source>main_objects - GeomValidators_ShapeType: It does not contain element with acceptable shape type. The type should be one of the next: %1</source>
+ <translation>It does not contain element with acceptable shape type. The type should be one of the next: %1</translation>
+ </message>
+ <message>
+ <source>main_objects - GeomValidators_ShapeType: It has reference to an empty attribute</source>
+ <translation></translation>
+ </message>
+ <message>
+ <source>main_objects - GeomValidators_ShapeType: Shape type is \"%1\", it should be \"%2\"</source>
+ <translation>Shape type is "%1", it should be "%2"</translation>
+ </message>
+ <message>
+ <source>main_objects - GeomValidators_ShapeType: The attribute with the %1 type is not processed</source>
+ <translation></translation>
+ </message>
+ <message>
+ <source>main_objects - GeomValidators_ShapeType: The object is empty</source>
+ <translation></translation>
+ </message>
+ <message>
+ <source>main_objects - GeomValidators_ShapeType: The result is empty</source>
+ <translation></translation>
+ </message>
+ <message>
+ <source>main_objects - GeomValidators_ShapeType: The shape is empty</source>
+ <translation></translation>
+ </message>
+ </context>
+
+ <context>
+ <name>ExtrusionFuse</name>
+ <message>
+ <source>GeomValidators_ZeroOffset: FromSize = -ToSize and bounding planes are coincident.</source>
+ <translation>FromSize = -ToSize and bounding planes are coincident.</translation>
+ </message>
+ <message>
+ <source>Model_FeatureValidator: Attribute "base" is not initialized.</source>
+ <translation>Base objects for extrusion are not selected.</translation>
+ </message>
+ <message>
+ <source>main_objects - GeomValidators_ShapeType: It does not contain element with acceptable shape type. The type should be one of the next: </source>
+ <translation>Selected objects contain element with unacceptable shape type.</translation>
+ </message>
+ <message>
+ <source>sketch - FeaturesPlugin_ValidatorCompositeLauncher: The object is empty</source>
+ <translation>Object is not selected.</translation>
+ </message>
+ <message>
+ <source>sketch - FeaturesPlugin_ValidatorCompositeLauncher: The result is empty</source>
+ <translation>Object is not selected.</translation>
+ </message>
+
+ <message>
+ <source>FeaturesPlugin_ValidatorExtrusionDir: Error: Validator should be used with 2 parameters for extrusion.</source>
+ <translation>Validator "FeaturesPlugin_ValidatorExtrusionDir" should be used with 2 parameters for extrusion.</translation>
+ </message>
+ <message>
+ <source>FeaturesPlugin_ValidatorExtrusionDir: Error: Base objects list contains vertex or edge, so attribute \"%1\" can not be used with default value. Select direction for extrusion.</source>
+ <translation>Base objects list contains vertex or edge, so attribute "%1" can not be used with default value. Select direction for extrusion.</translation>
+ </message>
+ <message>
+ <source>FeaturesPlugin_ValidatorExtrusionDir: Error: Direction is parallel to one of the selected face or face on selected shell.</source>
+ <translation>Direction is parallel to one of the selected face or face on selected shell.</translation>
+ </message>
+
+ <message>
+ <source>Model_FeatureValidator: Attribute "sketch" is not initialized.</source>
+ <translation>Base object for extrusion is not selected.</translation>
+ </message>
+ <message>
+ <source>Model_FeatureValidator: Attribute "base" is not initialized.</source>
+ <translation>Base object for extrusion is not selected.</translation>
+ </message>
+ <message>
+ <source>Model_FeatureValidator: Attribute "direction_object" is not initialized.</source>
+ <translation>Direction object for extrusion is not selected.</translation>
+ </message>
+ <message>
+ <source>Model_FeatureValidator: Attribute "to_size" is not initialized.</source>
+ <translation></translation>
+ </message>
+ <message>
+ <source>Model_FeatureValidator: Attribute "from_size" is not initialized.</source>
+ <translation></translation>
+ </message>
+ <message>
+ <source>Model_FeatureValidator: Attribute "from_object" is not initialized.</source>
+ <translation>From object for extrusion is not selected.</translation>
+ </message>
+ <message>
+ <source>Model_FeatureValidator: Attribute "from_offset" is not initialized.</source>
+ <translation></translation>
+ </message>
+ <message>
+ <source>Model_FeatureValidator: Attribute "to_object" is not initialized.</source>
+ <translation>To object for extrusion is not selected.</translation>