<source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Compound should contain only faces and edges.</source>
</message>
<message>
<source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Compound should contain only faces and edges.</source>
- <translation></translation>
+ <translation>Compound should contain only faces and edges.</translation>
</message>
<message>
<source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Object from this sketch is already selected. Sketch is not allowed for selection.</source>
</message>
<message>
<source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Object from this sketch is already selected. Sketch is not allowed for selection.</source>
- <translation></translation>
+ <translation>Object from this sketch is already selected. Sketch is not allowed for selection.</translation>
</message>
<message>
<source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Whole sketch with this object is already selected. Don't allow to select this object.</source>
</message>
<message>
<source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Whole sketch with this object is already selected. Don't allow to select this object.</source>
- <translation></translation>
+ <translation>Whole sketch with this object is already selected. Don't allow to select this object.</translation>
</message>
<message>
<source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Wire with wrong orientation selected.</source>
</message>
<message>
<source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Wire with wrong orientation selected.</source>
- <translation></translation>
+ <translation>Wire with wrong orientation selected.</translation>
</message>
<message>
<source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Objects with such wire already selected. Don't allow to select this object.</source>
</message>
<message>
<source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Objects with such wire already selected. Don't allow to select this object.</source>
- <translation></translation>
+ <translation>Objects with such wire already selected. Don't allow to select this object.</translation>
<source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Infinite constructions is not allowed as base.</source>
</message>
<message>
<source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Infinite constructions is not allowed as base.</source>
- <translation></translation>
+ <translation>Infinite constructions is not allowed as base.</translation>
</message>
<message>
<source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Selected shape is in the local selection. Only global selection is allowed.</source>
</message>
<message>
<source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Selected shape is in the local selection. Only global selection is allowed.</source>
- <translation></translation>
+ <translation>Selected shape is in the local selection. Only global selection is allowed.</translation>
</message>
<message>
<source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Selected shape has unacceptable type. Acceptable types are: faces or wires on sketch, whole sketch(if it has at least one face), and whole objects with shape types: %1</source>
</message>
<message>
<source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Selected shape has unacceptable type. Acceptable types are: faces or wires on sketch, whole sketch(if it has at least one face), and whole objects with shape types: %1</source>
- <translation></translation>
+ <translation>Selected shape has unacceptable type. Acceptable types are: faces or wires on sketch, whole sketch(if it has at least one face), and whole objects with shape types: %1</translation>
</message>
<message>
<source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Attribute \"%1\" does not supported by this validator.</source>
</message>
<message>
<source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Attribute \"%1\" does not supported by this validator.</source>
<source>direction_object - GeomValidators_ShapeType: It does not contain element with acceptable shape type. The type should be one of the next: %1</source>
</message>
<message>
<source>direction_object - GeomValidators_ShapeType: It does not contain element with acceptable shape type. The type should be one of the next: %1</source>
- <translation></translation>
+ <translation>It does not contain element with acceptable shape type. The type should be one of the next: %1</translation>
</message>
<message>
<source>direction_object - GeomValidators_ShapeType: It has reference to an empty attribute</source>
</message>
<message>
<source>direction_object - GeomValidators_ShapeType: It has reference to an empty attribute</source>
<source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Compound should contain only faces and edges.</source>
</message>
<message>
<source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Compound should contain only faces and edges.</source>
- <translation></translation>
+ <translation>Compound should contain only faces and edges.</translation>
</message>
<message>
<source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Object from this sketch is already selected. Sketch is not allowed for selection.</source>
</message>
<message>
<source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Object from this sketch is already selected. Sketch is not allowed for selection.</source>
- <translation></translation>
+ <translation>Object from this sketch is already selected. Sketch is not allowed for selection.</translation>
</message>
<message>
<source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Whole sketch with this object is already selected. Don't allow to select this object.</source>
</message>
<message>
<source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Whole sketch with this object is already selected. Don't allow to select this object.</source>
- <translation></translation>
+ <translation>Whole sketch with this object is already selected. Don't allow to select this object.</translation>
</message>
<message>
<source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Wire with wrong orientation selected.</source>
</message>
<message>
<source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Wire with wrong orientation selected.</source>
- <translation></translation>
+ <translation>Wire with wrong orientation selected.</translation>
</message>
<message>
<source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Objects with such wire already selected. Don't allow to select this object.</source>
</message>
<message>
<source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Objects with such wire already selected. Don't allow to select this object.</source>
- <translation></translation>
+ <translation>Objects with such wire already selected. Don't allow to select this object.</translation>
<source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Infinite constructions is not allowed as base.</source>
</message>
<message>
<source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Infinite constructions is not allowed as base.</source>
- <translation></translation>
+ <translation>Infinite constructions is not allowed as base.</translation>
</message>
<message>
<source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Selected shape is in the local selection. Only global selection is allowed.</source>
</message>
<message>
<source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Selected shape is in the local selection. Only global selection is allowed.</source>
- <translation></translation>
+ <translation>Selected shape is in the local selection. Only global selection is allowed.</translation>
</message>
<message>
<source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Selected shape has unacceptable type. Acceptable types are: faces or wires on sketch, whole sketch(if it has at least one face), and whole objects with shape types: %1</source>
</message>
<message>
<source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Selected shape has unacceptable type. Acceptable types are: faces or wires on sketch, whole sketch(if it has at least one face), and whole objects with shape types: %1</source>
- <translation></translation>
+ <translation>Selected shape has unacceptable type. Acceptable types are: faces or wires on sketch, whole sketch(if it has at least one face), and whole objects with shape types: %1</translation>
</message>
<message>
<source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Attribute \"%1\" does not supported by this validator.</source>
</message>
<message>
<source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Attribute \"%1\" does not supported by this validator.</source>
<source>direction_object - GeomValidators_ShapeType: It does not contain element with acceptable shape type. The type should be one of the next: %1</source>
</message>
<message>
<source>direction_object - GeomValidators_ShapeType: It does not contain element with acceptable shape type. The type should be one of the next: %1</source>
- <translation></translation>
+ <translation>It does not contain element with acceptable shape type. The type should be one of the next: %1</translation>
</message>
<message>
<source>direction_object - GeomValidators_ShapeType: It has reference to an empty attribute</source>
</message>
<message>
<source>direction_object - GeomValidators_ShapeType: It has reference to an empty attribute</source>
<source>main_objects - GeomValidators_ShapeType: It does not contain element with acceptable shape type. The type should be one of the next: %1</source>
</message>
<message>
<source>main_objects - GeomValidators_ShapeType: It does not contain element with acceptable shape type. The type should be one of the next: %1</source>
- <translation></translation>
+ <translation>It does not contain element with acceptable shape type. The type should be one of the next: %1</translation>
</message>
<message>
<source>main_objects - GeomValidators_ShapeType: It has reference to an empty attribute</source>
</message>
<message>
<source>main_objects - GeomValidators_ShapeType: It has reference to an empty attribute</source>
<source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Compound should contain only faces and edges.</source>
</message>
<message>
<source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Compound should contain only faces and edges.</source>
- <translation></translation>
+ <translation>Compound should contain only faces and edges.</translation>
</message>
<message>
<source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Object from this sketch is already selected. Sketch is not allowed for selection.</source>
</message>
<message>
<source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Object from this sketch is already selected. Sketch is not allowed for selection.</source>
- <translation></translation>
+ <translation>Object from this sketch is already selected. Sketch is not allowed for selection.</translation>
</message>
<message>
<source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Whole sketch with this object is already selected. Don't allow to select this object.</source>
</message>
<message>
<source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Whole sketch with this object is already selected. Don't allow to select this object.</source>
- <translation></translation>
+ <translation>Whole sketch with this object is already selected. Don't allow to select this object.</translation>
</message>
<message>
<source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Wire with wrong orientation selected.</source>
</message>
<message>
<source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Wire with wrong orientation selected.</source>
- <translation></translation>
+ <translation>Wire with wrong orientation selected.</translation>
</message>
<message>
<source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Objects with such wire already selected. Don't allow to select this object.</source>
</message>
<message>
<source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Objects with such wire already selected. Don't allow to select this object.</source>
- <translation></translation>
+ <translation>Objects with such wire already selected. Don't allow to select this object.</translation>
<source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Infinite constructions is not allowed as base.</source>
</message>
<message>
<source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Infinite constructions is not allowed as base.</source>
- <translation></translation>
+ <translation>Infinite constructions is not allowed as base.</translation>
</message>
<message>
<source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Selected shape is in the local selection. Only global selection is allowed.</source>
</message>
<message>
<source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Selected shape is in the local selection. Only global selection is allowed.</source>
- <translation></translation>
+ <translation>Selected shape is in the local selection. Only global selection is allowed.</translation>
</message>
<message>
<source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Selected shape has unacceptable type. Acceptable types are: faces or wires on sketch, whole sketch(if it has at least one face), and whole objects with shape types: %1</source>
</message>
<message>
<source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Selected shape has unacceptable type. Acceptable types are: faces or wires on sketch, whole sketch(if it has at least one face), and whole objects with shape types: %1</source>
- <translation></translation>
+ <translation>Selected shape has unacceptable type. Acceptable types are: faces or wires on sketch, whole sketch(if it has at least one face), and whole objects with shape types: %1</translation>
</message>
<message>
<source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Attribute \"%1\" does not supported by this validator.</source>
</message>
<message>
<source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Attribute \"%1\" does not supported by this validator.</source>
<source>axis_object - GeomValidators_ShapeType: It does not contain element with acceptable shape type. The type should be one of the next: %1</source>
</message>
<message>
<source>axis_object - GeomValidators_ShapeType: It does not contain element with acceptable shape type. The type should be one of the next: %1</source>
- <translation></translation>
+ <translation>It does not contain element with acceptable shape type. The type should be one of the next: %1</translation>
</message>
<message>
<source>axis_object - GeomValidators_ShapeType: It has reference to an empty attribute</source>
</message>
<message>
<source>axis_object - GeomValidators_ShapeType: It has reference to an empty attribute</source>
<source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Compound should contain only faces and edges.</source>
</message>
<message>
<source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Compound should contain only faces and edges.</source>
- <translation></translation>
+ <translation>Compound should contain only faces and edges.</translation>
</message>
<message>
<source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Object from this sketch is already selected. Sketch is not allowed for selection.</source>
</message>
<message>
<source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Object from this sketch is already selected. Sketch is not allowed for selection.</source>
- <translation></translation>
+ <translation>Object from this sketch is already selected. Sketch is not allowed for selection.</translation>
</message>
<message>
<source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Whole sketch with this object is already selected. Don't allow to select this object.</source>
</message>
<message>
<source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Whole sketch with this object is already selected. Don't allow to select this object.</source>
- <translation></translation>
+ <translation>Whole sketch with this object is already selected. Don't allow to select this object.</translation>
</message>
<message>
<source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Wire with wrong orientation selected.</source>
</message>
<message>
<source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Wire with wrong orientation selected.</source>
- <translation></translation>
+ <translation>Wire with wrong orientation selected.</translation>
</message>
<message>
<source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Objects with such wire already selected. Don't allow to select this object.</source>
</message>
<message>
<source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Objects with such wire already selected. Don't allow to select this object.</source>
- <translation></translation>
+ <translation>Objects with such wire already selected. Don't allow to select this object.</translation>
<source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Infinite constructions is not allowed as base.</source>
</message>
<message>
<source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Infinite constructions is not allowed as base.</source>
- <translation></translation>
+ <translation>Infinite constructions is not allowed as base.</translation>
</message>
<message>
<source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Selected shape is in the local selection. Only global selection is allowed.</source>
</message>
<message>
<source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Selected shape is in the local selection. Only global selection is allowed.</source>
- <translation></translation>
+ <translation>Selected shape is in the local selection. Only global selection is allowed.</translation>
</message>
<message>
<source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Selected shape has unacceptable type. Acceptable types are: faces or wires on sketch, whole sketch(if it has at least one face), and whole objects with shape types: %1</source>
</message>
<message>
<source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Selected shape has unacceptable type. Acceptable types are: faces or wires on sketch, whole sketch(if it has at least one face), and whole objects with shape types: %1</source>
- <translation></translation>
+ <translation>Selected shape has unacceptable type. Acceptable types are: faces or wires on sketch, whole sketch(if it has at least one face), and whole objects with shape types: %1</translation>
</message>
<message>
<source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Attribute \"%1\" does not supported by this validator.</source>
</message>
<message>
<source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Attribute \"%1\" does not supported by this validator.</source>
<source>axis_object - GeomValidators_ShapeType: It does not contain element with acceptable shape type. The type should be one of the next: %1</source>
</message>
<message>
<source>axis_object - GeomValidators_ShapeType: It does not contain element with acceptable shape type. The type should be one of the next: %1</source>
- <translation></translation>
+ <translation>It does not contain element with acceptable shape type. The type should be one of the next: %1</translation>
</message>
<message>
<source>axis_object - GeomValidators_ShapeType: It has reference to an empty attribute</source>
</message>
<message>
<source>axis_object - GeomValidators_ShapeType: It has reference to an empty attribute</source>
<source>main_objects - GeomValidators_ShapeType: It does not contain element with acceptable shape type. The type should be one of the next: %1</source>
</message>
<message>
<source>main_objects - GeomValidators_ShapeType: It does not contain element with acceptable shape type. The type should be one of the next: %1</source>
- <translation></translation>
+ <translation>It does not contain element with acceptable shape type. The type should be one of the next: %1</translation>
</message>
<message>
<source>main_objects - GeomValidators_ShapeType: It has reference to an empty attribute</source>
</message>
<message>
<source>main_objects - GeomValidators_ShapeType: It has reference to an empty attribute</source>
<source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Compound should contain only faces and edges.</source>
</message>
<message>
<source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Compound should contain only faces and edges.</source>
- <translation></translation>
+ <translation>Compound should contain only faces and edges.</translation>
</message>
<message>
<source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Object from this sketch is already selected. Sketch is not allowed for selection.</source>
</message>
<message>
<source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Object from this sketch is already selected. Sketch is not allowed for selection.</source>
- <translation></translation>
+ <translation>Object from this sketch is already selected. Sketch is not allowed for selection.</translation>
</message>
<message>
<source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Whole sketch with this object is already selected. Don't allow to select this object.</source>
</message>
<message>
<source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Whole sketch with this object is already selected. Don't allow to select this object.</source>
- <translation></translation>
+ <translation>Whole sketch with this object is already selected. Don't allow to select this object.</translation>
</message>
<message>
<source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Wire with wrong orientation selected.</source>
</message>
<message>
<source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Wire with wrong orientation selected.</source>
- <translation></translation>
+ <translation>Wire with wrong orientation selected.</translation>
</message>
<message>
<source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Objects with such wire already selected. Don't allow to select this object.</source>
</message>
<message>
<source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Objects with such wire already selected. Don't allow to select this object.</source>
- <translation></translation>
+ <translation>Objects with such wire already selected. Don't allow to select this object.</translation>
<source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Infinite constructions is not allowed as base.</source>
</message>
<message>
<source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Infinite constructions is not allowed as base.</source>
- <translation></translation>
+ <translation>Infinite constructions is not allowed as base.</translation>
</message>
<message>
<source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Selected shape is in the local selection. Only global selection is allowed.</source>
</message>
<message>
<source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Selected shape is in the local selection. Only global selection is allowed.</source>
- <translation></translation>
+ <translation>Selected shape is in the local selection. Only global selection is allowed.</translation>
</message>
<message>
<source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Selected shape has unacceptable type. Acceptable types are: faces or wires on sketch, whole sketch(if it has at least one face), and whole objects with shape types: %1</source>
</message>
<message>
<source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Selected shape has unacceptable type. Acceptable types are: faces or wires on sketch, whole sketch(if it has at least one face), and whole objects with shape types: %1</source>
- <translation></translation>
+ <translation>Selected shape has unacceptable type. Acceptable types are: faces or wires on sketch, whole sketch(if it has at least one face), and whole objects with shape types: %1</translation>
</message>
<message>
<source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Attribute \"%1\" does not supported by this validator.</source>
</message>
<message>
<source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Attribute \"%1\" does not supported by this validator.</source>
<source>direction_object - GeomValidators_ShapeType: It does not contain element with acceptable shape type. The type should be one of the next: %1</source>
</message>
<message>
<source>direction_object - GeomValidators_ShapeType: It does not contain element with acceptable shape type. The type should be one of the next: %1</source>
- <translation></translation>
+ <translation>It does not contain element with acceptable shape type. The type should be one of the next: %1</translation>
</message>
<message>
<source>direction_object - GeomValidators_ShapeType: It has reference to an empty attribute</source>
</message>
<message>
<source>direction_object - GeomValidators_ShapeType: It has reference to an empty attribute</source>
<source>main_objects - GeomValidators_ShapeType: It does not contain element with acceptable shape type. The type should be one of the next: %1</source>
</message>
<message>
<source>main_objects - GeomValidators_ShapeType: It does not contain element with acceptable shape type. The type should be one of the next: %1</source>
- <translation></translation>
+ <translation>It does not contain element with acceptable shape type. The type should be one of the next: %1</translation>
</message>
<message>
<source>main_objects - GeomValidators_ShapeType: It has reference to an empty attribute</source>
</message>
<message>
<source>main_objects - GeomValidators_ShapeType: It has reference to an empty attribute</source>
<source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Compound should contain only faces and edges.</source>
</message>
<message>
<source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Compound should contain only faces and edges.</source>
- <translation></translation>
+ <translation>Compound should contain only faces and edges.</translation>
</message>
<message>
<source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Object from this sketch is already selected. Sketch is not allowed for selection.</source>
</message>
<message>
<source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Object from this sketch is already selected. Sketch is not allowed for selection.</source>
- <translation></translation>
+ <translation>Object from this sketch is already selected. Sketch is not allowed for selection.</translation>
</message>
<message>
<source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Whole sketch with this object is already selected. Don't allow to select this object.</source>
</message>
<message>
<source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Whole sketch with this object is already selected. Don't allow to select this object.</source>
- <translation></translation>
+ <translation>Whole sketch with this object is already selected. Don't allow to select this object.</translation>
</message>
<message>
<source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Wire with wrong orientation selected.</source>
</message>
<message>
<source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Wire with wrong orientation selected.</source>
- <translation></translation>
+ <translation>Wire with wrong orientation selected.</translation>
</message>
<message>
<source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Objects with such wire already selected. Don't allow to select this object.</source>
</message>
<message>
<source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Objects with such wire already selected. Don't allow to select this object.</source>
- <translation></translation>
+ <translation>Objects with such wire already selected. Don't allow to select this object.</translation>
<source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Infinite constructions is not allowed as base.</source>
</message>
<message>
<source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Infinite constructions is not allowed as base.</source>
- <translation></translation>
+ <translation>Infinite constructions is not allowed as base.</translation>
</message>
<message>
<source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Selected shape is in the local selection. Only global selection is allowed.</source>
</message>
<message>
<source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Selected shape is in the local selection. Only global selection is allowed.</source>
- <translation></translation>
+ <translation>Selected shape is in the local selection. Only global selection is allowed.</translation>
</message>
<message>
<source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Selected shape has unacceptable type. Acceptable types are: faces or wires on sketch, whole sketch(if it has at least one face), and whole objects with shape types: %1</source>
</message>
<message>
<source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Selected shape has unacceptable type. Acceptable types are: faces or wires on sketch, whole sketch(if it has at least one face), and whole objects with shape types: %1</source>
- <translation></translation>
+ <translation>Selected shape has unacceptable type. Acceptable types are: faces or wires on sketch, whole sketch(if it has at least one face), and whole objects with shape types: %1</translation>
</message>
<message>
<source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Attribute \"%1\" does not supported by this validator.</source>
</message>
<message>
<source>base - FeaturesPlugin_ValidatorBaseForGeneration: Error: Attribute \"%1\" does not supported by this validator.</source>
<source>axis_object - GeomValidators_ShapeType: It does not contain element with acceptable shape type. The type should be one of the next: %1</source>
</message>
<message>
<source>axis_object - GeomValidators_ShapeType: It does not contain element with acceptable shape type. The type should be one of the next: %1</source>
- <translation></translation>
+ <translation>It does not contain element with acceptable shape type. The type should be one of the next: %1</translation>
</message>
<message>
<source>axis_object - GeomValidators_ShapeType: It has reference to an empty attribute</source>
</message>
<message>
<source>axis_object - GeomValidators_ShapeType: It has reference to an empty attribute</source>
<source>main_objects - GeomValidators_ShapeType: It does not contain element with acceptable shape type. The type should be one of the next: %1</source>
</message>
<message>
<source>main_objects - GeomValidators_ShapeType: It does not contain element with acceptable shape type. The type should be one of the next: %1</source>
- <translation></translation>
+ <translation>It does not contain element with acceptable shape type. The type should be one of the next: %1</translation>
</message>
<message>
<source>main_objects - GeomValidators_ShapeType: It has reference to an empty attribute</source>
</message>
<message>
<source>main_objects - GeomValidators_ShapeType: It has reference to an empty attribute</source>
<source>Model_FeatureValidator: Attribute "main_objects" is not initialized.</source>
</message>
<message>
<source>Model_FeatureValidator: Attribute "main_objects" is not initialized.</source>
- <translation></translation>
+ <translation>Objects not selected.</translation>
</message>
<message>
<source>Model_FeatureValidator: Attribute "tool_objects" is not initialized.</source>
</message>
<message>
<source>Model_FeatureValidator: Attribute "tool_objects" is not initialized.</source>
- <translation></translation>
+ <translation>Tools not selected.</translation>
</message>
<message>
<source>main_objects - FeaturesPlugin_ValidatorBooleanSelection: Error: This validator can only work with selection list attributes in \"Boolean\" feature.</source>
</message>
<message>
<source>main_objects - FeaturesPlugin_ValidatorBooleanSelection: Error: This validator can only work with selection list attributes in \"Boolean\" feature.</source>
<source>main_objects - FeaturesPlugin_ValidatorBooleanSelection: Error: Local selection not allowed.</source>
</message>
<message>
<source>main_objects - FeaturesPlugin_ValidatorBooleanSelection: Error: Local selection not allowed.</source>
- <translation></translation>
+ <translation>Local selection not allowed.</translation>
</message>
<message>
<source>main_objects - FeaturesPlugin_ValidatorBooleanSelection: Error: Selected shape has the wrong type.</source>
</message>
<message>
<source>main_objects - FeaturesPlugin_ValidatorBooleanSelection: Error: Selected shape has the wrong type.</source>
- <translation></translation>
+ <translation>Selected shape has the wrong type.</translation>
</message>
<message>
<source>main_objects - FeaturesPlugin_ValidatorBooleanSelection: Error: Selected shape has the wrong type.</source>
</message>
<message>
<source>main_objects - FeaturesPlugin_ValidatorBooleanSelection: Error: Selected shape has the wrong type.</source>
- <translation></translation>
+ <translation>Selected shape has the wrong type.</translation>
</message>
<message>
<source>tool_objects - FeaturesPlugin_ValidatorBooleanSelection: Error: This validator can only work with selection list attributes in \"Boolean\" feature.</source>
</message>
<message>
<source>tool_objects - FeaturesPlugin_ValidatorBooleanSelection: Error: This validator can only work with selection list attributes in \"Boolean\" feature.</source>
<source>Model_FeatureValidator: Attribute "base_objects" is not initialized.</source>
<message>
<source>Model_FeatureValidator: Attribute "base_objects" is not initialized.</source>
- <translation></translation>
+ <translation>Objects not selected.</translation>
</message>
<message>
<source>base_objects - FeaturesPlugin_ValidatorPartitionSelection: Error: This validator can only work with selection list in \"Partition\" feature.</source>
</message>
<message>
<source>base_objects - FeaturesPlugin_ValidatorPartitionSelection: Error: This validator can only work with selection list in \"Partition\" feature.</source>
<source>base_objects - FeaturesPlugin_ValidatorBaseForGeneration: Error: Compound should contain only faces and edges.</source>
</message>
<message>
<source>base_objects - FeaturesPlugin_ValidatorBaseForGeneration: Error: Compound should contain only faces and edges.</source>
- <translation></translation>
+ <translation>Compound should contain only faces and edges.</translation>
</message>
<message>
<source>base_objects - FeaturesPlugin_ValidatorBaseForGeneration: Error: Object from this sketch is already selected. Sketch is not allowed for selection.</source>
</message>
<message>
<source>base_objects - FeaturesPlugin_ValidatorBaseForGeneration: Error: Object from this sketch is already selected. Sketch is not allowed for selection.</source>
- <translation></translation>
+ <translation>Object from this sketch is already selected. Sketch is not allowed for selection.</translation>
</message>
<message>
<source>base_objects - FeaturesPlugin_ValidatorBaseForGeneration: Error: Whole sketch with this object is already selected. Don't allow to select this object.</source>
</message>
<message>
<source>base_objects - FeaturesPlugin_ValidatorBaseForGeneration: Error: Whole sketch with this object is already selected. Don't allow to select this object.</source>
- <translation></translation>
+ <translation>Whole sketch with this object is already selected. Don't allow to select this object.</translation>
</message>
<message>
<source>base_objects - FeaturesPlugin_ValidatorBaseForGeneration: Error: Wire with wrong orientation selected.</source>
</message>
<message>
<source>base_objects - FeaturesPlugin_ValidatorBaseForGeneration: Error: Wire with wrong orientation selected.</source>
- <translation></translation>
+ <translation>Wire with wrong orientation selected.</translation>
</message>
<message>
<source>base_objects - FeaturesPlugin_ValidatorBaseForGeneration: Error: Objects with such wire already selected. Don't allow to select this object.</source>
</message>
<message>
<source>base_objects - FeaturesPlugin_ValidatorBaseForGeneration: Error: Objects with such wire already selected. Don't allow to select this object.</source>
- <translation></translation>
+ <translation>Objects with such wire already selected. Don't allow to select this object.</translation>
<source>base_objects - FeaturesPlugin_ValidatorBaseForGeneration: Error: Infinite constructions is not allowed as base.</source>
</message>
<message>
<source>base_objects - FeaturesPlugin_ValidatorBaseForGeneration: Error: Infinite constructions is not allowed as base.</source>
- <translation></translation>
+ <translation>Infinite constructions is not allowed as base.</translation>
</message>
<message>
<source>base_objects - FeaturesPlugin_ValidatorBaseForGeneration: Error: Selected shape is in the local selection. Only global selection is allowed.</source>
</message>
<message>
<source>base_objects - FeaturesPlugin_ValidatorBaseForGeneration: Error: Selected shape is in the local selection. Only global selection is allowed.</source>
- <translation></translation>
+ <translation>Selected shape is in the local selection. Only global selection is allowed.</translation>
</message>
<message>
<source>base_objects - FeaturesPlugin_ValidatorBaseForGeneration: Error: Selected shape has unacceptable type. Acceptable types are: faces or wires on sketch, whole sketch(if it has at least one face), and whole objects with shape types: %1</source>
</message>
<message>
<source>base_objects - FeaturesPlugin_ValidatorBaseForGeneration: Error: Selected shape has unacceptable type. Acceptable types are: faces or wires on sketch, whole sketch(if it has at least one face), and whole objects with shape types: %1</source>
- <translation></translation>
+ <translation>Selected shape has unacceptable type. Acceptable types are: faces or wires on sketch, whole sketch(if it has at least one face), and whole objects with shape types: %1</translation>
</message>
<message>
<source>base_objects - FeaturesPlugin_ValidatorBaseForGeneration: Error: Attribute \"%1\" does not supported by this validator.</source>
</message>
<message>
<source>base_objects - FeaturesPlugin_ValidatorBaseForGeneration: Error: Attribute \"%1\" does not supported by this validator.</source>
<source>main_objects - FeaturesPlugin_ValidatorTransform: Objects from the %1 group can be selected in the %2 document, but an objects from the %3 group is selected.</source>
</message>
<message>
<source>main_objects - FeaturesPlugin_ValidatorTransform: Objects from the %1 group can be selected in the %2 document, but an objects from the %3 group is selected.</source>
- <translation></translation>
+ <translation>Objects from the %1 group can be selected in the %2 document, but an objects from the %3 group is selected.</translation>
<source>main_objects - FeaturesPlugin_ValidatorTransform: Objects from the %1 group can be selected in the %2 document, but an objects from the %3 group is selected.</source>
</message>
<message>
<source>main_objects - FeaturesPlugin_ValidatorTransform: Objects from the %1 group can be selected in the %2 document, but an objects from the %3 group is selected.</source>
- <translation></translation>
+ <translation>Objects from the %1 group can be selected in the %2 document, but an objects from the %3 group is selected.</translation>