-# Copyright (C) 2007-2014 CEA/DEN, EDF R&D, OPEN CASCADE
+# Copyright (C) 2007-2016 CEA/DEN, EDF R&D, OPEN CASCADE
#
# This library is free software; you can redistribute it and/or
# modify it under the terms of the GNU Lesser General Public
## @{
## @defgroup l3_algos_basic Basic meshing algorithms
## @defgroup l3_algos_proj Projection Algorithms
-## @defgroup l3_algos_radialp Radial Prism
## @defgroup l3_algos_segmarv Segments around Vertex
## @defgroup l3_algos_3dextr 3D extrusion meshing algorithm
## @defgroup l2_modif_trsf Transforming meshes (Translation, Rotation, Symmetry, Sewing, Merging)
## @defgroup l2_modif_movenode Moving nodes
## @defgroup l2_modif_throughp Mesh through point
-## @defgroup l2_modif_invdiag Diagonal inversion of elements
## @defgroup l2_modif_unitetri Uniting triangles
-## @defgroup l2_modif_changori Changing orientation of elements
## @defgroup l2_modif_cutquadr Cutting elements
+## @defgroup l2_modif_changori Changing orientation of elements
## @defgroup l2_modif_smooth Smoothing
## @defgroup l2_modif_extrurev Extrusion and Revolution
## @defgroup l2_modif_patterns Pattern mapping
# Substitute AxisStruct.__init__() to create SMESH.AxisStruct using notebook variables.
# Parameters are stored in AxisStruct.parameters attribute
def __initAxisStruct(ax,*args):
+ if len( args ) != 6:
+ raise RuntimeError,\
+ "Bad nb args (%s) passed in SMESH.AxisStruct(x,y,z,dx,dy,dz)"%(len( args ))
ax.x, ax.y, ax.z, ax.vx, ax.vy, ax.vz, ax.parameters,hasVars = ParseParameters(*args)
pass
SMESH.AxisStruct.__init__ = __initAxisStruct
elif status == HYP_BAD_SUBSHAPE :
reason = "the shape is neither the main one, nor its sub-shape, nor a valid group"
elif status == HYP_BAD_GEOMETRY:
- reason = "geometry mismatches the expectation of the algorithm"
+ reason = "the algorithm is not applicable to this geometry"
elif status == HYP_HIDDEN_ALGO:
reason = "it is hidden by an algorithm of an upper dimension, which generates elements of all dimensions"
elif status == HYP_HIDING_ALGO:
if mesh:
meshName = GetName( mesh )
if meshName and meshName != NO_NAME:
- where = '"%s" in "%s"' % ( geomName, meshName )
+ where = '"%s" shape in "%s" mesh ' % ( geomName, meshName )
if status < HYP_UNKNOWN_FATAL and where:
print '"%s" was assigned to %s but %s' %( hypName, where, reason )
elif where:
doLcc = False
created = False
-## This class allows to create, load or manipulate meshes
-# It has a set of methods to create load or copy meshes, to combine several meshes.
-# It also has methods to get infos on meshes.
+## This class allows to create, load or manipulate meshes.
+# It has a set of methods to create, load or copy meshes, to combine several meshes, etc.
+# It also has methods to get infos and measure meshes.
class smeshBuilder(object, SMESH._objref_SMESH_Gen):
# MirrorType enumeration
#return self.IsEmbeddedMode()
return SMESH._objref_SMESH_Gen.IsEmbeddedMode(self)
- ## Sets the current study
+ ## Sets the current study. Calling SetCurrentStudy( None ) allows to
+ # switch OFF automatic pubilishing in the Study of mesh objects.
# @ingroup l1_auxiliary
def SetCurrentStudy( self, theStudy, geompyD = None ):
#self.SetCurrentStudy(theStudy)
notebook = salome_notebook.NoteBook( theStudy )
else:
notebook = salome_notebook.NoteBook( salome_notebook.PseudoStudyForNoteBook() )
+ if theStudy:
+ sb = theStudy.NewBuilder()
+ sc = theStudy.FindComponent("SMESH")
+ if sc: sb.LoadWith(sc, self)
+ pass
+ pass
## Gets the current study
# @ingroup l1_auxiliary
if error.comment: print "*** CreateMeshesFromGMF() errors:\n", error.comment
return Mesh(self, self.geompyD, aSmeshMesh), error
- ## Concatenate the given meshes into one mesh.
- # @return an instance of Mesh class
- # @param meshes the meshes to combine into one mesh
+ ## Concatenate the given meshes into one mesh. All groups of input meshes will be
+ # present in the new mesh.
+ # @param meshes the meshes, sub-meshes and groups to combine into one mesh
# @param uniteIdenticalGroups if true, groups with same names are united, else they are renamed
- # @param mergeNodesAndElements if true, equal nodes and elements aremerged
+ # @param mergeNodesAndElements if true, equal nodes and elements are merged
# @param mergeTolerance tolerance for merging nodes
- # @param allGroups forces creation of groups of all elements
+ # @param allGroups forces creation of groups corresponding to every input mesh
# @param name name of a new mesh
+ # @return an instance of Mesh class
+ # @ingroup l2_compounds
def Concatenate( self, meshes, uniteIdenticalGroups,
mergeNodesAndElements = False, mergeTolerance = 1e-5, allGroups = False,
name = ""):
# pass result of Mesh.GetIDSource( list_of_ids, type ) as meshPart
# @param meshName a name of the new mesh
# @param toCopyGroups to create in the new mesh groups the copied elements belongs to
- # @param toKeepIDs to preserve IDs of the copied elements or not
+ # @param toKeepIDs to preserve order of the copied elements or not
# @return an instance of Mesh class
def CopyMesh( self, meshPart, meshName, toCopyGroups=False, toKeepIDs=False):
if (isinstance( meshPart, Mesh )):
## Creates a criterion by the given parameters
# \n Criterion structures allow to define complex filters by combining them with logical operations (AND / OR) (see example below)
- # @param elementType the type of elements(NODE, EDGE, FACE, VOLUME)
- # @param CritType the type of criterion (FT_Taper, FT_Area, FT_RangeOfIds, FT_LyingOnGeom etc.)
- # @param Compare belongs to {FT_LessThan, FT_MoreThan, FT_EqualTo}
+ # @param elementType the type of elements(SMESH.NODE, SMESH.EDGE, SMESH.FACE, SMESH.VOLUME)
+ # @param CritType the type of criterion (SMESH.FT_Taper, SMESH.FT_Area, etc.)
+ # Type SMESH.FunctorType._items in the Python Console to see all values.
+ # Note that the items starting from FT_LessThan are not suitable for CritType.
+ # @param Compare belongs to {SMESH.FT_LessThan, SMESH.FT_MoreThan, SMESH.FT_EqualTo}
# @param Threshold the threshold value (range of ids as string, shape, numeric)
- # @param UnaryOp FT_LogicalNOT or FT_Undefined
- # @param BinaryOp a binary logical operation FT_LogicalAND, FT_LogicalOR or
- # FT_Undefined (must be for the last criterion of all criteria)
- # @param Tolerance the tolerance used by FT_BelongToGeom, FT_BelongToSurface,
- # FT_LyingOnGeom, FT_CoplanarFaces criteria
+ # @param UnaryOp SMESH.FT_LogicalNOT or SMESH.FT_Undefined
+ # @param BinaryOp a binary logical operation SMESH.FT_LogicalAND, SMESH.FT_LogicalOR or
+ # SMESH.FT_Undefined
+ # @param Tolerance the tolerance used by SMESH.FT_BelongToGeom, SMESH.FT_BelongToSurface,
+ # SMESH.FT_LyingOnGeom, SMESH.FT_CoplanarFaces criteria
# @return SMESH.Filter.Criterion
#
# <a href="../tui_filters_page.html#combining_filters">Example of Criteria usage</a>
if CritType in [FT_BelongToGeom, FT_BelongToPlane, FT_BelongToGenSurface,
FT_BelongToCylinder, FT_LyingOnGeom]:
- # Checks that Threshold is GEOM object
+ # Check that Threshold is GEOM object
if isinstance(aThreshold, geomBuilder.GEOM._objref_GEOM_Object):
aCriterion.ThresholdStr = GetName(aThreshold)
aCriterion.ThresholdID = aThreshold.GetStudyEntry()
if not name:
name = "%s_%s"%(aThreshold.GetShapeType(), id(aThreshold)%10000)
aCriterion.ThresholdID = self.geompyD.addToStudy( aThreshold, name )
- #raise RuntimeError, "Threshold shape must be published"
+ # or a name of GEOM object
+ elif isinstance( aThreshold, str ):
+ aCriterion.ThresholdStr = aThreshold
else:
- print "Error: The Threshold should be a shape."
- return None
+ raise TypeError, "The Threshold should be a shape."
if isinstance(UnaryOp,float):
aCriterion.Tolerance = UnaryOp
UnaryOp = FT_Undefined
pass
+ elif CritType == FT_BelongToMeshGroup:
+ # Check that Threshold is a group
+ if isinstance(aThreshold, SMESH._objref_SMESH_GroupBase):
+ if aThreshold.GetType() != elementType:
+ raise ValueError, "Group type mismatches Element type"
+ aCriterion.ThresholdStr = aThreshold.GetName()
+ aCriterion.ThresholdID = salome.orb.object_to_string( aThreshold )
+ study = self.GetCurrentStudy()
+ if study:
+ so = study.FindObjectIOR( aCriterion.ThresholdID )
+ if so:
+ entry = so.GetID()
+ if entry:
+ aCriterion.ThresholdID = entry
+ else:
+ raise TypeError, "The Threshold should be a Mesh Group"
elif CritType == FT_RangeOfIds:
- # Checks that Threshold is string
+ # Check that Threshold is string
if isinstance(aThreshold, str):
aCriterion.ThresholdStr = aThreshold
else:
- print "Error: The Threshold should be a string."
- return None
+ raise TypeError, "The Threshold should be a string."
elif CritType == FT_CoplanarFaces:
- # Checks the Threshold
+ # Check the Threshold
if isinstance(aThreshold, int):
aCriterion.ThresholdID = str(aThreshold)
elif isinstance(aThreshold, str):
raise ValueError, "Invalid ID of mesh face: '%s'"%aThreshold
aCriterion.ThresholdID = aThreshold
else:
- raise ValueError,\
+ raise TypeError,\
"The Threshold should be an ID of mesh face and not '%s'"%aThreshold
elif CritType == FT_ConnectedElements:
- # Checks the Threshold
+ # Check the Threshold
if isinstance(aThreshold, geomBuilder.GEOM._objref_GEOM_Object): # shape
aCriterion.ThresholdID = aThreshold.GetStudyEntry()
if not aCriterion.ThresholdID:
else:
aCriterion.ThresholdStr = aThreshold # hope that it's point coordinates
else:
- raise ValueError,\
+ raise TypeError,\
"The Threshold should either a VERTEX, or a node ID, "\
"or a list of point coordinates and not '%s'"%aThreshold
elif CritType == FT_ElemGeomType:
- # Checks the Threshold
+ # Check the Threshold
try:
aCriterion.Threshold = self.EnumToLong(aThreshold)
assert( aThreshold in SMESH.GeometryType._items )
if isinstance(aThreshold, int):
aCriterion.Threshold = aThreshold
else:
- print "Error: The Threshold should be an integer or SMESH.GeometryType."
- return None
+ raise TypeError, "The Threshold should be an integer or SMESH.GeometryType."
pass
pass
elif CritType == FT_EntityType:
- # Checks the Threshold
+ # Check the Threshold
try:
aCriterion.Threshold = self.EnumToLong(aThreshold)
assert( aThreshold in SMESH.EntityType._items )
if isinstance(aThreshold, int):
aCriterion.Threshold = aThreshold
else:
- print "Error: The Threshold should be an integer or SMESH.EntityType."
- return None
+ raise TypeError, "The Threshold should be an integer or SMESH.EntityType."
pass
pass
elif CritType == FT_GroupColor:
- # Checks the Threshold
+ # Check the Threshold
try:
aCriterion.ThresholdStr = self.ColorToString(aThreshold)
except:
- print "Error: The threshold value should be of SALOMEDS.Color type"
- return None
+ raise TypeError, "The threshold value should be of SALOMEDS.Color type"
pass
elif CritType in [FT_FreeBorders, FT_FreeEdges, FT_FreeNodes, FT_FreeFaces,
FT_LinearOrQuadratic, FT_BadOrientedVolume,
aThreshold = float(aThreshold)
aCriterion.Threshold = aThreshold
except:
- print "Error: The Threshold should be a number."
+ raise TypeError, "The Threshold should be a number."
return None
if Threshold == FT_LogicalNOT or UnaryOp == FT_LogicalNOT:
return aCriterion
## Creates a filter with the given parameters
- # @param elementType the type of elements in the group
- # @param CritType the type of criterion ( FT_Taper, FT_Area, FT_RangeOfIds, FT_LyingOnGeom etc. )
- # @param Compare belongs to {FT_LessThan, FT_MoreThan, FT_EqualTo}
- # @param Threshold the threshold value (range of id ids as string, shape, numeric)
- # @param UnaryOp FT_LogicalNOT or FT_Undefined
- # @param Tolerance the tolerance used by FT_BelongToGeom, FT_BelongToSurface,
- # FT_LyingOnGeom, FT_CoplanarFaces and FT_EqualNodes criteria
+ # @param elementType the type of elements (SMESH.NODE, SMESH.EDGE, SMESH.FACE, SMESH.VOLUME)
+ # @param CritType the type of criterion (SMESH.FT_Taper, SMESH.FT_Area, etc.)
+ # Type SMESH.FunctorType._items in the Python Console to see all values.
+ # Note that the items starting from FT_LessThan are not suitable for CritType.
+ # @param Compare belongs to {SMESH.FT_LessThan, SMESH.FT_MoreThan, SMESH.FT_EqualTo}
+ # @param Threshold the threshold value (range of ids as string, shape, numeric)
+ # @param UnaryOp SMESH.FT_LogicalNOT or SMESH.FT_Undefined
+ # @param Tolerance the tolerance used by SMESH.FT_BelongToGeom, SMESH.FT_BelongToSurface,
+ # SMESH.FT_LyingOnGeom, SMESH.FT_CoplanarFaces and SMESH.FT_EqualNodes criteria
# @param mesh the mesh to initialize the filter with
# @return SMESH_Filter
#
return aFilter
## Creates a numerical functor by its type
- # @param theCriterion FT_...; functor type
+ # @param theCriterion functor type - an item of SMESH.FunctorType enumeration.
+ # Type SMESH.FunctorType._items in the Python Console to see all items.
+ # Note that not all items correspond to numerical functors.
# @return SMESH_NumericalFunctor
# @ingroup l1_controls
def GetFunctor(self,theCriterion):
functor = aFilterMgr.CreateLength()
elif theCriterion == FT_Length2D:
functor = aFilterMgr.CreateLength2D()
+ elif theCriterion == FT_NodeConnectivityNumber:
+ functor = aFilterMgr.CreateNodeConnectivityNumber()
+ elif theCriterion == FT_BallDiameter:
+ functor = aFilterMgr.CreateBallDiameter()
else:
print "Error: given parameter is not numerical functor type."
aFilterMgr.UnRegister()
# import salome
# salome.salome_init()
# from salome.smesh import smeshBuilder
-# smesh = smeshBuilder.New(theStudy)
+# smesh = smeshBuilder.New(salome.myStudy)
# \endcode
# @param study SALOME study, generally obtained by salome.myStudy.
# @param instance CORBA proxy of SMESH Engine. If None, the default Engine is used.
import salome
salome.salome_init()
from salome.smesh import smeshBuilder
- smesh = smeshBuilder.New(theStudy)
+ smesh = smeshBuilder.New(salome.myStudy)
Parameters:
study SALOME study, generally obtained by salome.myStudy.
for attrName in dir(self):
attr = getattr( self, attrName )
if isinstance( attr, algoCreator ):
- #print "algoCreator ", attrName
setattr( self, attrName, attr.copy( self ))
pass
pass
# @param discardModifs if True and the mesh has been edited since
# a last total re-compute and that may prevent successful partial re-compute,
# then the mesh is cleaned before Compute()
+ # @param refresh if @c True, Object browser is automatically updated (when running in GUI)
# @return True or False
# @ingroup l2_construct
- def Compute(self, geom=0, discardModifs=False):
+ def Compute(self, geom=0, discardModifs=False, refresh=False):
if geom == 0 or not isinstance(geom, geomBuilder.GEOM._objref_GEOM_Object):
if self.geom == 0:
geom = self.mesh.GetShapeToMesh()
# Treat compute errors
computeErrors = self.smeshpyD.GetComputeErrors( self.mesh, geom )
+ shapeText = ""
for err in computeErrors:
- shapeText = ""
if self.mesh.HasShapeToMesh():
- try:
- mainIOR = salome.orb.object_to_string(geom)
- for sname in salome.myStudyManager.GetOpenStudies():
- s = salome.myStudyManager.GetStudyByName(sname)
- if not s: continue
- mainSO = s.FindObjectIOR(mainIOR)
- if not mainSO: continue
- if err.subShapeID == 1:
- shapeText = ' on "%s"' % mainSO.GetName()
- subIt = s.NewChildIterator(mainSO)
- while subIt.More():
- subSO = subIt.Value()
- subIt.Next()
- obj = subSO.GetObject()
- if not obj: continue
- go = obj._narrow( geomBuilder.GEOM._objref_GEOM_Object )
- if not go: continue
- ids = go.GetSubShapeIndices()
- if len(ids) == 1 and ids[0] == err.subShapeID:
- shapeText = ' on "%s"' % subSO.GetName()
- break
- if not shapeText:
- shape = self.geompyD.GetSubShape( geom, [err.subShapeID])
- if shape:
- shapeText = " on %s #%s" % (shape.GetShapeType(), err.subShapeID)
- else:
- shapeText = " on subshape #%s" % (err.subShapeID)
- except:
- shapeText = " on subshape #%s" % (err.subShapeID)
+ shapeText = " on %s" % self.GetSubShapeName( err.subShapeID )
errText = ""
stdErrors = ["OK", #COMPERR_OK
"Invalid input mesh", #COMPERR_BAD_INPUT_MESH
print allReasons
pass
if salome.sg.hasDesktop() and self.mesh.GetStudyId() >= 0:
- smeshgui = salome.ImportComponentGUI("SMESH")
- smeshgui.Init(self.mesh.GetStudyId())
- smeshgui.SetMeshIcon( salome.ObjectToID( self.mesh ), ok, (self.NbNodes()==0) )
- salome.sg.updateObjBrowser(1)
- pass
+ if not isinstance( refresh, list): # not a call from subMesh.Compute()
+ smeshgui = salome.ImportComponentGUI("SMESH")
+ smeshgui.Init(self.mesh.GetStudyId())
+ smeshgui.SetMeshIcon( salome.ObjectToID( self.mesh ), ok, (self.NbNodes()==0) )
+ if refresh: salome.sg.updateObjBrowser(1)
+
return ok
- ## Return submesh objects list in meshing order
- # @return list of list of submesh objects
+ ## Return a list of error messages (SMESH.ComputeError) of the last Compute()
+ def GetComputeErrors(self, shape=0 ):
+ if shape == 0:
+ shape = self.mesh.GetShapeToMesh()
+ return self.smeshpyD.GetComputeErrors( self.mesh, shape )
+
+ ## Return a name of a sub-shape by its ID
+ # @param subShapeID a unique ID of a sub-shape
+ # @return a string describing the sub-shape; possible variants:
+ # - "Face_12" (published sub-shape)
+ # - FACE #3 (not published sub-shape)
+ # - sub-shape #3 (invalid sub-shape ID)
+ # - #3 (error in this function)
+ def GetSubShapeName(self, subShapeID ):
+ if not self.mesh.HasShapeToMesh():
+ return ""
+ try:
+ shapeText = ""
+ mainIOR = salome.orb.object_to_string( self.GetShape() )
+ for sname in salome.myStudyManager.GetOpenStudies():
+ s = salome.myStudyManager.GetStudyByName(sname)
+ if not s: continue
+ mainSO = s.FindObjectIOR(mainIOR)
+ if not mainSO: continue
+ if subShapeID == 1:
+ shapeText = '"%s"' % mainSO.GetName()
+ subIt = s.NewChildIterator(mainSO)
+ while subIt.More():
+ subSO = subIt.Value()
+ subIt.Next()
+ obj = subSO.GetObject()
+ if not obj: continue
+ go = obj._narrow( geomBuilder.GEOM._objref_GEOM_Object )
+ if not go: continue
+ try:
+ ids = self.geompyD.GetSubShapeID( self.GetShape(), go )
+ except:
+ continue
+ if ids == subShapeID:
+ shapeText = '"%s"' % subSO.GetName()
+ break
+ if not shapeText:
+ shape = self.geompyD.GetSubShape( self.GetShape(), [subShapeID])
+ if shape:
+ shapeText = '%s #%s' % (shape.GetShapeType(), subShapeID)
+ else:
+ shapeText = 'sub-shape #%s' % (subShapeID)
+ except:
+ shapeText = "#%s" % (subShapeID)
+ return shapeText
+
+ ## Return a list of sub-shapes meshing of which failed, grouped into GEOM groups by
+ # error of an algorithm
+ # @param publish if @c True, the returned groups will be published in the study
+ # @return a list of GEOM groups each named after a failed algorithm
+ def GetFailedShapes(self, publish=False):
+
+ algo2shapes = {}
+ computeErrors = self.smeshpyD.GetComputeErrors( self.mesh, self.GetShape() )
+ for err in computeErrors:
+ shape = self.geompyD.GetSubShape( self.GetShape(), [err.subShapeID])
+ if not shape: continue
+ if err.algoName in algo2shapes:
+ algo2shapes[ err.algoName ].append( shape )
+ else:
+ algo2shapes[ err.algoName ] = [ shape ]
+ pass
+
+ groups = []
+ for algoName, shapes in algo2shapes.items():
+ while shapes:
+ groupType = self.smeshpyD.EnumToLong( shapes[0].GetShapeType() )
+ otherTypeShapes = []
+ sameTypeShapes = []
+ group = self.geompyD.CreateGroup( self.geom, groupType )
+ for shape in shapes:
+ if shape.GetShapeType() == shapes[0].GetShapeType():
+ sameTypeShapes.append( shape )
+ else:
+ otherTypeShapes.append( shape )
+ self.geompyD.UnionList( group, sameTypeShapes )
+ if otherTypeShapes:
+ group.SetName( "%s %s" % ( algoName, shapes[0].GetShapeType() ))
+ else:
+ group.SetName( algoName )
+ groups.append( group )
+ shapes = otherTypeShapes
+ pass
+ if publish:
+ for group in groups:
+ self.geompyD.addToStudyInFather( self.geom, group, group.GetName() )
+ return groups
+
+ ## Return sub-mesh objects list in meshing order
+ # @return list of lists of sub-meshes
# @ingroup l2_construct
def GetMeshOrder(self):
return self.mesh.GetMeshOrder()
- ## Return submesh objects list in meshing order
- # @return list of list of submesh objects
+ ## Set order in which concurrent sub-meshes sould be meshed
+ # @param submeshes list of lists of sub-meshes
# @ingroup l2_construct
def SetMeshOrder(self, submeshes):
return self.mesh.SetMeshOrder(submeshes)
## Removes all nodes and elements
+ # @param refresh if @c True, Object browser is automatically updated (when running in GUI)
# @ingroup l2_construct
- def Clear(self):
+ def Clear(self, refresh=False):
self.mesh.Clear()
if ( salome.sg.hasDesktop() and
- salome.myStudyManager.GetStudyByID( self.mesh.GetStudyId() )):
+ salome.myStudyManager.GetStudyByID( self.mesh.GetStudyId() ) ):
smeshgui = salome.ImportComponentGUI("SMESH")
smeshgui.Init(self.mesh.GetStudyId())
smeshgui.SetMeshIcon( salome.ObjectToID( self.mesh ), False, True )
- salome.sg.updateObjBrowser(1)
+ if refresh: salome.sg.updateObjBrowser(1)
## Removes all nodes and elements of indicated shape
+ # @param refresh if @c True, Object browser is automatically updated (when running in GUI)
+ # @param geomId the ID of a sub-shape to remove elements on
# @ingroup l2_construct
- def ClearSubMesh(self, geomId):
+ def ClearSubMesh(self, geomId, refresh=False):
self.mesh.ClearSubMesh(geomId)
if salome.sg.hasDesktop():
smeshgui = salome.ImportComponentGUI("SMESH")
smeshgui.Init(self.mesh.GetStudyId())
smeshgui.SetMeshIcon( salome.ObjectToID( self.mesh ), False, True )
- salome.sg.updateObjBrowser(1)
+ if refresh: salome.sg.updateObjBrowser(1)
## Computes a tetrahedral mesh using AutomaticLength + MEFISTO + Tetrahedron
# @param fineness [0.0,1.0] defines mesh fineness
# @return SMESH.Hypothesis_Status
# @ingroup l2_hypotheses
def AddHypothesis(self, hyp, geom=0):
+ if isinstance( hyp, geomBuilder.GEOM._objref_GEOM_Object ):
+ hyp, geom = geom, hyp
if isinstance( hyp, Mesh_Algorithm ):
hyp = hyp.GetAlgorithm()
pass
if self.mesh.HasShapeToMesh():
hyp_type = hyp.GetName()
lib_name = hyp.GetLibName()
- checkAll = ( not geom.IsSame( self.mesh.GetShapeToMesh() ))
- if checkAll and geom:
- checkAll = geom.GetType() == 37
+ # checkAll = ( not geom.IsSame( self.mesh.GetShapeToMesh() ))
+ # if checkAll and geom:
+ # checkAll = geom.GetType() == 37
+ checkAll = False
isApplicable = self.smeshpyD.IsApplicable(hyp_type, lib_name, geom, checkAll)
if isApplicable:
AssureGeomPublished( self, geom, "shape for %s" % hyp.GetName())
status = self.mesh.AddHypothesis(geom, hyp)
else:
- status = HYP_BAD_GEOMETRY
+ status = HYP_BAD_GEOMETRY,""
hyp_name = GetName( hyp )
geom_name = ""
if geom:
# ----------------------
## Creates an empty mesh group
- # @param elementType the type of elements in the group
+ # @param elementType the type of elements in the group; either of
+ # (SMESH.NODE, SMESH.EDGE, SMESH.FACE, SMESH.VOLUME)
# @param name the name of the mesh group
# @return SMESH_Group
# @ingroup l2_grps_create
# the name is the same as the geometrical group name
# @param grp a geometrical group, a vertex, an edge, a face or a solid
# @param name the name of the mesh group
- # @param typ the type of elements in the group. If not set, it is
- # automatically detected by the type of the geometry
+ # @param typ the type of elements in the group; either of
+ # (SMESH.NODE, SMESH.EDGE, SMESH.FACE, SMESH.VOLUME). If not set, it is
+ # automatically detected by the type of the geometry
# @return SMESH_GroupOnGeom
# @ingroup l2_grps_create
def GroupOnGeom(self, grp, name="", typ=None):
## Creates a mesh group with given \a name based on the \a filter which
## is a special type of group dynamically updating it's contents during
## mesh modification
- # @param typ the type of elements in the group
+ # @param typ the type of elements in the group; either of
+ # (SMESH.NODE, SMESH.EDGE, SMESH.FACE, SMESH.VOLUME).
# @param name the name of the mesh group
# @param filter the filter defining group contents
# @return SMESH_GroupOnFilter
## Creates a mesh group by the given ids of elements
# @param groupName the name of the mesh group
- # @param elementType the type of elements in the group
- # @param elemIDs the list of ids
+ # @param elementType the type of elements in the group; either of
+ # (SMESH.NODE, SMESH.EDGE, SMESH.FACE, SMESH.VOLUME).
+ # @param elemIDs either the list of ids, group, sub-mesh, or filter
# @return SMESH_Group
# @ingroup l2_grps_create
def MakeGroupByIds(self, groupName, elementType, elemIDs):
group = self.mesh.CreateGroup(elementType, groupName)
- group.Add(elemIDs)
+ if hasattr( elemIDs, "GetIDs" ):
+ if hasattr( elemIDs, "SetMesh" ):
+ elemIDs.SetMesh( self.GetMesh() )
+ group.AddFrom( elemIDs )
+ else:
+ group.Add(elemIDs)
return group
## Creates a mesh group by the given conditions
# @param groupName the name of the mesh group
- # @param elementType the type of elements in the group
- # @param CritType the type of criterion( FT_Taper, FT_Area, FT_RangeOfIds, FT_LyingOnGeom etc. )
- # @param Compare belongs to {FT_LessThan, FT_MoreThan, FT_EqualTo}
- # @param Threshold the threshold value (range of id ids as string, shape, numeric)
- # @param UnaryOp FT_LogicalNOT or FT_Undefined
- # @param Tolerance the tolerance used by FT_BelongToGeom, FT_BelongToSurface,
- # FT_LyingOnGeom, FT_CoplanarFaces criteria
+ # @param elementType the type of elements(SMESH.NODE, SMESH.EDGE, SMESH.FACE, SMESH.VOLUME)
+ # @param CritType the type of criterion (SMESH.FT_Taper, SMESH.FT_Area, etc.)
+ # Type SMESH.FunctorType._items in the Python Console to see all values.
+ # Note that the items starting from FT_LessThan are not suitable for CritType.
+ # @param Compare belongs to {SMESH.FT_LessThan, SMESH.FT_MoreThan, SMESH.FT_EqualTo}
+ # @param Threshold the threshold value (range of ids as string, shape, numeric)
+ # @param UnaryOp SMESH.FT_LogicalNOT or SMESH.FT_Undefined
+ # @param Tolerance the tolerance used by SMESH.FT_BelongToGeom, SMESH.FT_BelongToSurface,
+ # SMESH.FT_LyingOnGeom, SMESH.FT_CoplanarFaces criteria
# @return SMESH_GroupOnFilter
# @ingroup l2_grps_create
def MakeGroup(self,
# @return SMESH_GroupOnFilter
# @ingroup l2_grps_create
def MakeGroupByCriterion(self, groupName, Criterion):
- aFilterMgr = self.smeshpyD.CreateFilterManager()
- aFilter = aFilterMgr.CreateFilter()
- aCriteria = []
- aCriteria.append(Criterion)
- aFilter.SetCriteria(aCriteria)
- group = self.MakeGroupByFilter(groupName, aFilter)
- aFilterMgr.UnRegister()
- return group
+ return self.MakeGroupByCriteria( groupName, [Criterion] )
## Creates a mesh group by the given criteria (list of criteria)
# @param groupName the name of the mesh group
# @param theCriteria the list of criteria
+ # @param binOp binary operator used when binary operator of criteria is undefined
# @return SMESH_GroupOnFilter
# @ingroup l2_grps_create
- def MakeGroupByCriteria(self, groupName, theCriteria):
- aFilterMgr = self.smeshpyD.CreateFilterManager()
- aFilter = aFilterMgr.CreateFilter()
- aFilter.SetCriteria(theCriteria)
+ def MakeGroupByCriteria(self, groupName, theCriteria, binOp=SMESH.FT_LogicalAND):
+ aFilter = self.smeshpyD.GetFilterFromCriteria( theCriteria, binOp )
group = self.MakeGroupByFilter(groupName, aFilter)
- aFilterMgr.UnRegister()
return group
## Creates a mesh group by the given filter
def RemoveGroupWithContents(self, group):
self.mesh.RemoveGroupWithContents(group)
- ## Gets the list of groups existing in the mesh in the order of creation (starting from the oldest one)
+ ## Gets the list of groups existing in the mesh in the order
+ # of creation (starting from the oldest one)
+ # @param elemType type of elements the groups contain; either of
+ # (SMESH.ALL, SMESH.NODE, SMESH.EDGE, SMESH.FACE, SMESH.VOLUME);
+ # by default groups of elements of all types are returned
# @return a sequence of SMESH_GroupBase
# @ingroup l2_grps_create
- def GetGroups(self):
- return self.mesh.GetGroups()
+ def GetGroups(self, elemType = SMESH.ALL):
+ groups = self.mesh.GetGroups()
+ if elemType == SMESH.ALL:
+ return groups
+ typedGroups = []
+ for g in groups:
+ if g.GetType() == elemType:
+ typedGroups.append( g )
+ pass
+ pass
+ return typedGroups
## Gets the number of groups existing in the mesh
# @return the quantity of groups as an integer value
names.append(group.GetName())
return names
- ## Produces a union of two groups
+ ## Finds groups by name and type
+ # @param name name of the group of interest
+ # @param elemType type of elements the groups contain; either of
+ # (SMESH.ALL, SMESH.NODE, SMESH.EDGE, SMESH.FACE, SMESH.VOLUME);
+ # by default one group of any type of elements is returned
+ # if elemType == SMESH.ALL then all groups of any type are returned
+ # @return a list of SMESH_GroupBase's
+ # @ingroup l2_grps_create
+ def GetGroupByName(self, name, elemType = None):
+ groups = []
+ for group in self.GetGroups():
+ if group.GetName() == name:
+ if elemType is None:
+ return [group]
+ if ( elemType == SMESH.ALL or
+ group.GetType() == elemType ):
+ groups.append( group )
+ return groups
+
+ ## Produces a union of two groups.
# A new group is created. All mesh elements that are
# present in the initial groups are added to the new one
# @return an instance of SMESH_Group
def UnionGroups(self, group1, group2, name):
return self.mesh.UnionGroups(group1, group2, name)
- ## Produces a union list of groups
+ ## Produces a union list of groups.
# New group is created. All mesh elements that are present in
# initial groups are added to the new one
# @return an instance of SMESH_Group
def UnionListOfGroups(self, groups, name):
return self.mesh.UnionListOfGroups(groups, name)
- ## Prodices an intersection of two groups
+ ## Prodices an intersection of two groups.
# A new group is created. All mesh elements that are common
# for the two initial groups are added to the new one.
# @return an instance of SMESH_Group
def IntersectGroups(self, group1, group2, name):
return self.mesh.IntersectGroups(group1, group2, name)
- ## Produces an intersection of groups
+ ## Produces an intersection of groups.
# New group is created. All mesh elements that are present in all
# initial groups simultaneously are added to the new one
# @return an instance of SMESH_Group
def IntersectListOfGroups(self, groups, name):
return self.mesh.IntersectListOfGroups(groups, name)
- ## Produces a cut of two groups
+ ## Produces a cut of two groups.
# A new group is created. All mesh elements that are present in
# the main group but are not present in the tool group are added to the new one
# @return an instance of SMESH_Group
def CutGroups(self, main_group, tool_group, name):
return self.mesh.CutGroups(main_group, tool_group, name)
- ## Produces a cut of groups
+ ## Produces a cut of groups.
# A new group is created. All mesh elements that are present in main groups
# but do not present in tool groups are added to the new one
# @return an instance of SMESH_Group
# @ingroup l2_grps_operon
def CutListOfGroups(self, main_groups, tool_groups, name):
- return self.mesh.CutListOfGroups(main_groups, tool_groups, name)
+ return self.mesh.CutListOfGroups(main_groups, tool_groups, name)
- ## Produces a group of elements of specified type using list of existing groups
- # A new group is created. System
- # 1) extracts all nodes on which groups elements are built
- # 2) combines all elements of specified dimension laying on these nodes
+ ##
+ # Create a standalone group of entities basing on nodes of other groups.
+ # \param groups - list of reference groups, sub-meshes or filters, of any type.
+ # \param elemType - a type of elements to include to the new group; either of
+ # (SMESH.NODE, SMESH.EDGE, SMESH.FACE, SMESH.VOLUME).
+ # \param name - a name of the new group.
+ # \param nbCommonNodes - a criterion of inclusion of an element to the new group
+ # basing on number of element nodes common with reference \a groups.
+ # Meaning of possible values are:
+ # - SMESH.ALL_NODES - include if all nodes are common,
+ # - SMESH.MAIN - include if all corner nodes are common (meaningful for a quadratic mesh),
+ # - SMESH.AT_LEAST_ONE - include if one or more node is common,
+ # - SMEHS.MAJORITY - include if half of nodes or more are common.
+ # \param underlyingOnly - if \c True (default), an element is included to the
+ # new group provided that it is based on nodes of an element of \a groups;
+ # in this case the reference \a groups are supposed to be of higher dimension
+ # than \a elemType, which can be useful for example to get all faces lying on
+ # volumes of the reference \a groups.
# @return an instance of SMESH_Group
# @ingroup l2_grps_operon
- def CreateDimGroup(self, groups, elem_type, name):
- return self.mesh.CreateDimGroup(groups, elem_type, name)
+ def CreateDimGroup(self, groups, elemType, name,
+ nbCommonNodes = SMESH.ALL_NODES, underlyingOnly = True):
+ if isinstance( groups, SMESH._objref_SMESH_IDSource ):
+ groups = [groups]
+ return self.mesh.CreateDimGroup(groups, elemType, name, nbCommonNodes, underlyingOnly)
## Convert group on geom into standalone group
- # @ingroup l2_grps_delete
+ # @ingroup l2_grps_edit
def ConvertToStandalone(self, group):
return self.mesh.ConvertToStandalone(group)
## Wrap a list of IDs of elements or nodes into SMESH_IDSource which
# can be passed as argument to a method accepting mesh, group or sub-mesh
+ # @param ids list of IDs
+ # @param elemType type of elements; this parameter is used to distinguish
+ # IDs of nodes from IDs of elements; by default ids are treated as
+ # IDs of elements; use SMESH.NODE if ids are IDs of nodes.
# @return an instance of SMESH_IDSource
+ # @warning call UnRegister() for the returned object as soon as it is no more useful:
+ # idSrc = mesh.GetIDSource( [1,3,5], SMESH.NODE )
+ # mesh.DoSomething( idSrc )
+ # idSrc.UnRegister()
# @ingroup l1_auxiliary
- def GetIDSource(self, ids, elemType):
+ def GetIDSource(self, ids, elemType = SMESH.ALL):
+ if isinstance( ids, int ):
+ ids = [ids]
return self.editor.MakeIDSource(ids, elemType)
## Returns the number of edges with the given order in the mesh
# @param elementOrder the order of elements:
- # ORDER_ANY, ORDER_LINEAR or ORDER_QUADRATIC
+ # SMESH.ORDER_ANY, SMESH.ORDER_LINEAR or SMESH.ORDER_QUADRATIC
# @return an integer value
# @ingroup l1_meshinfo
def NbEdgesOfOrder(self, elementOrder):
## Returns the number of faces with the given order in the mesh
# @param elementOrder the order of elements:
- # ORDER_ANY, ORDER_LINEAR or ORDER_QUADRATIC
+ # SMESH.ORDER_ANY, SMESH.ORDER_LINEAR or SMESH.ORDER_QUADRATIC
# @return an integer value
# @ingroup l1_meshinfo
def NbFacesOfOrder(self, elementOrder):
## Returns the number of triangles with the given order in the mesh
# @param elementOrder is the order of elements:
- # ORDER_ANY, ORDER_LINEAR or ORDER_QUADRATIC
+ # SMESH.ORDER_ANY, SMESH.ORDER_LINEAR or SMESH.ORDER_QUADRATIC
# @return an integer value
# @ingroup l1_meshinfo
def NbTrianglesOfOrder(self, elementOrder):
## Returns the number of quadrangles with the given order in the mesh
# @param elementOrder the order of elements:
- # ORDER_ANY, ORDER_LINEAR or ORDER_QUADRATIC
+ # SMESH.ORDER_ANY, SMESH.ORDER_LINEAR or SMESH.ORDER_QUADRATIC
# @return an integer value
# @ingroup l1_meshinfo
def NbQuadranglesOfOrder(self, elementOrder):
def NbBiQuadQuadrangles(self):
return self.mesh.NbBiQuadQuadrangles()
- ## Returns the number of polygons in the mesh
+ ## Returns the number of polygons of given order in the mesh
+ # @param elementOrder the order of elements:
+ # SMESH.ORDER_ANY, SMESH.ORDER_LINEAR or SMESH.ORDER_QUADRATIC
# @return an integer value
# @ingroup l1_meshinfo
- def NbPolygons(self):
- return self.mesh.NbPolygons()
+ def NbPolygons(self, elementOrder = SMESH.ORDER_ANY):
+ return self.mesh.NbPolygonsOfOrder(elementOrder)
## Returns the number of volumes in the mesh
# @return an integer value
## Returns the number of volumes with the given order in the mesh
# @param elementOrder the order of elements:
- # ORDER_ANY, ORDER_LINEAR or ORDER_QUADRATIC
+ # SMESH.ORDER_ANY, SMESH.ORDER_LINEAR or SMESH.ORDER_QUADRATIC
# @return an integer value
# @ingroup l1_meshinfo
def NbVolumesOfOrder(self, elementOrder):
## Returns the number of tetrahedrons with the given order in the mesh
# @param elementOrder the order of elements:
- # ORDER_ANY, ORDER_LINEAR or ORDER_QUADRATIC
+ # SMESH.ORDER_ANY, SMESH.ORDER_LINEAR or SMESH.ORDER_QUADRATIC
# @return an integer value
# @ingroup l1_meshinfo
def NbTetrasOfOrder(self, elementOrder):
## Returns the number of hexahedrons with the given order in the mesh
# @param elementOrder the order of elements:
- # ORDER_ANY, ORDER_LINEAR or ORDER_QUADRATIC
+ # SMESH.ORDER_ANY, SMESH.ORDER_LINEAR or SMESH.ORDER_QUADRATIC
# @return an integer value
# @ingroup l1_meshinfo
def NbHexasOfOrder(self, elementOrder):
## Returns the number of pyramids with the given order in the mesh
# @param elementOrder the order of elements:
- # ORDER_ANY, ORDER_LINEAR or ORDER_QUADRATIC
+ # SMESH.ORDER_ANY, SMESH.ORDER_LINEAR or SMESH.ORDER_QUADRATIC
# @return an integer value
# @ingroup l1_meshinfo
def NbPyramidsOfOrder(self, elementOrder):
## Returns the number of prisms with the given order in the mesh
# @param elementOrder the order of elements:
- # ORDER_ANY, ORDER_LINEAR or ORDER_QUADRATIC
+ # SMESH.ORDER_ANY, SMESH.ORDER_LINEAR or SMESH.ORDER_QUADRATIC
# @return an integer value
# @ingroup l1_meshinfo
def NbPrismsOfOrder(self, elementOrder):
return self.mesh.GetElementsId()
## Returns the list of IDs of mesh elements with the given type
- # @param elementType the required type of elements (SMESH.NODE, SMESH.EDGE, SMESH.FACE or SMESH.VOLUME)
+ # @param elementType the required type of elements, either of
+ # (SMESH.NODE, SMESH.EDGE, SMESH.FACE or SMESH.VOLUME)
# @return list of integer values
# @ingroup l1_meshinfo
def GetElementsByType(self, elementType):
## Returns the type of mesh element
# @return the value from SMESH::ElementType enumeration
+ # Type SMESH.ElementType._items in the Python Console to see all possible values.
# @ingroup l1_meshinfo
- def GetElementType(self, id, iselem):
+ def GetElementType(self, id, iselem=True):
return self.mesh.GetElementType(id, iselem)
## Returns the geometric type of mesh element
# @return the value from SMESH::EntityType enumeration
+ # Type SMESH.EntityType._items in the Python Console to see all possible values.
# @ingroup l1_meshinfo
def GetElementGeomType(self, id):
return self.mesh.GetElementGeomType(id)
## Returns the shape type of mesh element
- # @return the value from SMESH::GeometryType enumeration
+ # @return the value from SMESH::GeometryType enumeration.
+ # Type SMESH.GeometryType._items in the Python Console to see all possible values.
# @ingroup l1_meshinfo
def GetElementShape(self, id):
return self.mesh.GetElementShape(id)
# @return the list of integer values
# @ingroup l1_meshinfo
def GetSubMeshElementsId(self, Shape):
- if ( isinstance( Shape, geomBuilder.GEOM._objref_GEOM_Object)):
- ShapeID = Shape.GetSubShapeIndices()[0]
+ if isinstance( Shape, geomBuilder.GEOM._objref_GEOM_Object):
+ ShapeID = self.geompyD.GetSubShapeID( self.geom, Shape )
else:
ShapeID = Shape
return self.mesh.GetSubMeshElementsId(ShapeID)
# @return the list of integer values
# @ingroup l1_meshinfo
def GetSubMeshNodesId(self, Shape, all):
- if ( isinstance( Shape, geomBuilder.GEOM._objref_GEOM_Object)):
+ if isinstance( Shape, geomBuilder.GEOM._objref_GEOM_Object):
ShapeID = self.geompyD.GetSubShapeID( self.geom, Shape )
else:
ShapeID = Shape
# @return element type
# @ingroup l1_meshinfo
def GetSubMeshElementType(self, Shape):
- if ( isinstance( Shape, geomBuilder.GEOM._objref_GEOM_Object)):
- ShapeID = Shape.GetSubShapeIndices()[0]
+ if isinstance( Shape, geomBuilder.GEOM._objref_GEOM_Object):
+ ShapeID = self.geompyD.GetSubShapeID( self.geom, Shape )
else:
ShapeID = Shape
return self.mesh.GetSubMeshElementType(ShapeID)
def GetElementPosition(self,ElemID):
return self.mesh.GetElementPosition(ElemID)
- ## If the given element is a node, returns the ID of shape
- # \n If there is no node for the given ID - returns -1
- # @return an integer value
+ ## Returns the ID of the shape, on which the given node was generated.
+ # @return an integer value > 0 or -1 if there is no node for the given
+ # ID or the node is not assigned to any geometry
# @ingroup l1_meshinfo
def GetShapeID(self, id):
return self.mesh.GetShapeID(id)
- ## Returns the ID of the result shape after
- # FindShape() from SMESH_MeshEditor for the given element
- # \n If there is no element for the given ID - returns -1
- # @return an integer value
+ ## Returns the ID of the shape, on which the given element was generated.
+ # @return an integer value > 0 or -1 if there is no element for the given
+ # ID or the element is not assigned to any geometry
# @ingroup l1_meshinfo
def GetShapeIDForElem(self,id):
return self.mesh.GetShapeIDForElem(id)
- ## Returns the number of nodes for the given element
- # \n If there is no element for the given ID - returns -1
- # @return an integer value
+ ## Returns the number of nodes of the given element
+ # @return an integer value > 0 or -1 if there is no element for the given ID
# @ingroup l1_meshinfo
def GetElemNbNodes(self, id):
return self.mesh.GetElemNbNodes(id)
return self.mesh.IsMediumNode(elementID, nodeID)
## Returns true if the given node is the medium node in one of quadratic elements
+ # @param nodeID ID of the node
+ # @param elementType the type of elements to check a state of the node, either of
+ # (SMESH.ALL, SMESH.NODE, SMESH.EDGE, SMESH.FACE or SMESH.VOLUME)
# @ingroup l1_meshinfo
- def IsMediumNodeOfAnyElem(self, nodeID, elementType):
+ def IsMediumNodeOfAnyElem(self, nodeID, elementType = SMESH.ALL ):
return self.mesh.IsMediumNodeOfAnyElem(nodeID, elementType)
## Returns the number of edges for the given element
## Get measure structure specifying bounding box data of the specified object(s)
# @param IDs single source object or list of source objects or list of nodes/elements IDs
- # @param isElem if @a objects is a list of IDs, @c True value in this parameters specifies that @a objects are elements,
+ # @param isElem if @a IDs is a list of IDs, @c True value in this parameters specifies that @a objects are elements,
# @c False specifies that @a objects are nodes
# @return Measure structure
# @sa BoundingBox()
## Creates a 0D element on a node with given number.
# @param IDOfNode the ID of node for creation of the element.
+ # @param DuplicateElements to add one more 0D element to a node or not
# @return the Id of the new 0D element
# @ingroup l2_modif_add
- def Add0DElement(self, IDOfNode):
- return self.editor.Add0DElement(IDOfNode)
+ def Add0DElement( self, IDOfNode, DuplicateElements=True ):
+ return self.editor.Add0DElement( IDOfNode, DuplicateElements )
## Create 0D elements on all nodes of the given elements except those
# nodes on which a 0D element already exists.
# of nodes IDs created by calling mesh.GetIDSource( nodes, SMESH.NODE )
# @param theGroupName optional name of a group to add 0D elements created
# and/or found on nodes of \a theObject.
+ # @param DuplicateElements to add one more 0D element to a node or not
# @return an object (a new group or a temporary SMESH_IDSource) holding
# IDs of new and/or found 0D elements. IDs of 0D elements
# can be retrieved from the returned object by calling GetIDs()
# @ingroup l2_modif_add
- def Add0DElementsToAllNodes(self, theObject, theGroupName=""):
+ def Add0DElementsToAllNodes(self, theObject, theGroupName="", DuplicateElements=False):
unRegister = genObjUnRegister()
if isinstance( theObject, Mesh ):
theObject = theObject.GetMesh()
- if isinstance( theObject, list ):
+ elif isinstance( theObject, list ):
theObject = self.GetIDSource( theObject, SMESH.ALL )
unRegister.set( theObject )
- return self.editor.Create0DElementsOnAllNodes( theObject, theGroupName )
+ return self.editor.Create0DElementsOnAllNodes( theObject, theGroupName, DuplicateElements )
## Creates a ball element on a node with given ID.
# @param IDOfNode the ID of node for creation of the element.
def AddPolygonalFace(self, IdsOfNodes):
return self.editor.AddPolygonalFace(IdsOfNodes)
+ ## Adds a quadratic polygonal face to the mesh by the list of node IDs
+ # @param IdsOfNodes the list of node IDs for creation of the element;
+ # corner nodes follow first.
+ # @return the Id of the new face
+ # @ingroup l2_modif_add
+ def AddQuadPolygonalFace(self, IdsOfNodes):
+ return self.editor.AddQuadPolygonalFace(IdsOfNodes)
+
## Creates both simple and quadratic volume (this is determined
# by the number of given nodes).
# @param IDsOfNodes the list of node IDs for creation of the element.
# @ingroup l2_modif_add
def SetNodeOnVertex(self, NodeID, Vertex):
if ( isinstance( Vertex, geomBuilder.GEOM._objref_GEOM_Object)):
- VertexID = Vertex.GetSubShapeIndices()[0]
+ VertexID = self.geompyD.GetSubShapeID( self.geom, Vertex )
else:
VertexID = Vertex
try:
# @ingroup l2_modif_add
def SetNodeOnEdge(self, NodeID, Edge, paramOnEdge):
if ( isinstance( Edge, geomBuilder.GEOM._objref_GEOM_Object)):
- EdgeID = Edge.GetSubShapeIndices()[0]
+ EdgeID = self.geompyD.GetSubShapeID( self.geom, Edge )
else:
EdgeID = Edge
try:
# @ingroup l2_modif_add
def SetNodeOnFace(self, NodeID, Face, u, v):
if ( isinstance( Face, geomBuilder.GEOM._objref_GEOM_Object)):
- FaceID = Face.GetSubShapeIndices()[0]
+ FaceID = self.geompyD.GetSubShapeID( self.geom, Face )
else:
FaceID = Face
try:
# @ingroup l2_modif_add
def SetNodeInVolume(self, NodeID, Solid):
if ( isinstance( Solid, geomBuilder.GEOM._objref_GEOM_Object)):
- SolidID = Solid.GetSubShapeIndices()[0]
+ SolidID = self.geompyD.GetSubShapeID( self.geom, Solid )
else:
SolidID = Solid
try:
# @ingroup l2_modif_add
def SetMeshElementOnShape(self, ElementID, Shape):
if ( isinstance( Shape, geomBuilder.GEOM._objref_GEOM_Object)):
- ShapeID = Shape.GetSubShapeIndices()[0]
+ ShapeID = self.geompyD.GetSubShapeID( self.geom, Shape )
else:
ShapeID = Shape
try:
# @param x the X coordinate of a point
# @param y the Y coordinate of a point
# @param z the Z coordinate of a point
- # @param elementType type of elements to find (SMESH.ALL type
- # means elements of any type excluding nodes, discrete and 0D elements)
+ # @param elementType type of elements to find; either of
+ # (SMESH.NODE, SMESH.EDGE, SMESH.FACE, SMESH.VOLUME); SMESH.ALL type
+ # means elements of any type excluding nodes, discrete and 0D elements.
# @param meshPart a part of mesh (group, sub-mesh) to search within
# @return list of IDs of found elements
# @ingroup l2_modif_throughp
else:
return self.editor.FindElementsByPoint(x, y, z, elementType)
- # Return point state in a closed 2D mesh in terms of TopAbs_State enumeration:
- # 0-IN, 1-OUT, 2-ON, 3-UNKNOWN
- # TopAbs_UNKNOWN state means that either mesh is wrong or the analysis fails.
-
+ ## Return point state in a closed 2D mesh in terms of TopAbs_State enumeration:
+ # 0-IN, 1-OUT, 2-ON, 3-UNKNOWN
+ # UNKNOWN state means that either mesh is wrong or the analysis fails.
def GetPointState(self, x, y, z):
return self.editor.GetPointState(x, y, z)
# @param NodeID1 the ID of the first node
# @param NodeID2 the ID of the second node
# @return false if proper faces were not found
- # @ingroup l2_modif_invdiag
+ # @ingroup l2_modif_cutquadr
def InverseDiag(self, NodeID1, NodeID2):
return self.editor.InverseDiag(NodeID1, NodeID2)
return self.editor.Reorient2DBy3D( the2DObject, the3DObject, theOutsideNormal )
## Fuses the neighbouring triangles into quadrangles.
- # @param IDsOfElements The triangles to be fused,
- # @param theCriterion is a numerical functor, in terms of enum SMESH.FunctorType, used to
- # choose a neighbour to fuse with.
+ # @param IDsOfElements The triangles to be fused.
+ # @param theCriterion a numerical functor, in terms of enum SMESH.FunctorType, used to
+ # applied to possible quadrangles to choose a neighbour to fuse with.
+ # Type SMESH.FunctorType._items in the Python Console to see all items.
+ # Note that not all items correspond to numerical functors.
# @param MaxAngle is the maximum angle between element normals at which the fusion
- # is still performed; theMaxAngle is mesured in radians.
- # Also it could be a name of variable which defines angle in degrees.
+ # is still performed; theMaxAngle is mesured in radians.
+ # Also it could be a name of variable which defines angle in degrees.
# @return TRUE in case of success, FALSE otherwise.
# @ingroup l2_modif_unitetri
def TriToQuad(self, IDsOfElements, theCriterion, MaxAngle):
## Fuses the neighbouring triangles of the object into quadrangles
# @param theObject is mesh, submesh or group
- # @param theCriterion is a numerical functor, in terms of enum SMESH.FunctorType, used to
- # choose a neighbour to fuse with.
+ # @param theCriterion is a numerical functor, in terms of enum SMESH.FunctorType,
+ # applied to possible quadrangles to choose a neighbour to fuse with.
+ # Type SMESH.FunctorType._items in the Python Console to see all items.
+ # Note that not all items correspond to numerical functors.
# @param MaxAngle a max angle between element normals at which the fusion
- # is still performed; theMaxAngle is mesured in radians.
+ # is still performed; theMaxAngle is mesured in radians.
# @return TRUE in case of success, FALSE otherwise.
# @ingroup l2_modif_unitetri
def TriToQuadObject (self, theObject, theCriterion, MaxAngle):
## Splits quadrangles into triangles.
# @param IDsOfElements the faces to be splitted.
- # @param theCriterion is a numerical functor, in terms of enum SMESH.FunctorType, used to
+ # @param theCriterion is a numerical functor, in terms of enum SMESH.FunctorType, used to
# choose a diagonal for splitting. If @a theCriterion is None, which is a default
# value, then quadrangles will be split by the smallest diagonal.
+ # Type SMESH.FunctorType._items in the Python Console to see all items.
+ # Note that not all items correspond to numerical functors.
# @return TRUE in case of success, FALSE otherwise.
# @ingroup l2_modif_cutquadr
def QuadToTri (self, IDsOfElements, theCriterion = None):
# @param theCriterion is a numerical functor, in terms of enum SMESH.FunctorType, used to
# choose a diagonal for splitting. If @a theCriterion is None, which is a default
# value, then quadrangles will be split by the smallest diagonal.
+ # Type SMESH.FunctorType._items in the Python Console to see all items.
+ # Note that not all items correspond to numerical functors.
# @return TRUE in case of success, FALSE otherwise.
# @ingroup l2_modif_cutquadr
def QuadToTriObject (self, theObject, theCriterion = None):
# @param IDOfQuad the ID of the quadrangle to be splitted.
# @param theCriterion is a numerical functor, in terms of enum SMESH.FunctorType, used to
# choose a diagonal for splitting.
+ # Type SMESH.FunctorType._items in the Python Console to see all items.
+ # Note that not all items correspond to numerical functors.
# @return 1 if 1-3 diagonal is better, 2 if 2-4
# diagonal is better, 0 if error occurs.
# @ingroup l2_modif_cutquadr
elems = self.editor.MakeIDSource(elems, SMESH.VOLUME)
unRegister.set( elems )
self.editor.SplitVolumesIntoTetra(elems, method)
+ return
+
+ ## Split bi-quadratic elements into linear ones without creation of additional nodes:
+ # - bi-quadratic triangle will be split into 3 linear quadrangles;
+ # - bi-quadratic quadrangle will be split into 4 linear quadrangles;
+ # - tri-quadratic hexahedron will be split into 8 linear hexahedra.
+ # Quadratic elements of lower dimension adjacent to the split bi-quadratic element
+ # will be split in order to keep the mesh conformal.
+ # @param elems - elements to split: sub-meshes, groups, filters or element IDs;
+ # if None (default), all bi-quadratic elements will be split
+ # @ingroup l2_modif_cutquadr
+ def SplitBiQuadraticIntoLinear(self, elems=None):
+ unRegister = genObjUnRegister()
+ if elems and isinstance( elems, list ) and isinstance( elems[0], int ):
+ elems = self.editor.MakeIDSource(elems, SMESH.ALL)
+ unRegister.set( elems )
+ if elems is None:
+ elems = [ self.GetMesh() ]
+ if isinstance( elems, Mesh ):
+ elems = [ elems.GetMesh() ]
+ if not isinstance( elems, list ):
+ elems = [elems]
+ self.editor.SplitBiQuadraticIntoLinear( elems )
## Splits hexahedra into prisms
# @param elems either a list of elements or a mesh or a group or a submesh or a filter
# them with quadratic with the same id.
# @param theForce3d new node creation method:
# 0 - the medium node lies at the geometrical entity from which the mesh element is built
- # 1 - the medium node lies at the middle of the line segments connecting start and end node of a mesh element
+ # 1 - the medium node lies at the middle of the line segments connecting two nodes of a mesh element
# @param theSubMesh a group or a sub-mesh to convert; WARNING: in this case the mesh can become not conformal
# @param theToBiQuad If True, converts the mesh to bi-quadratic
# @ingroup l2_modif_tofromqu
- def ConvertToQuadratic(self, theForce3d, theSubMesh=None, theToBiQuad=False):
+ def ConvertToQuadratic(self, theForce3d=False, theSubMesh=None, theToBiQuad=False):
if isinstance( theSubMesh, Mesh ):
theSubMesh = theSubMesh.mesh
if theToBiQuad:
## Creates 2D mesh as skin on boundary faces of a 3D mesh
# @return TRUE if operation has been completed successfully, FALSE otherwise
# @ingroup l2_modif_edit
- def Make2DMeshFrom3D(self):
- return self.editor. Make2DMeshFrom3D()
+ def Make2DMeshFrom3D(self):
+ return self.editor.Make2DMeshFrom3D()
## Creates missing boundary elements
# @param elements - elements whose boundary is to be checked:
# mesh, group, sub-mesh or list of elements
# if elements is mesh, it must be the mesh whose MakeBoundaryMesh() is called
- # @param dimension - defines type of boundary elements to create:
- # SMESH.BND_2DFROM3D, SMESH.BND_1DFROM3D, SMESH.BND_1DFROM2D
+ # @param dimension - defines type of boundary elements to create, either of
+ # { SMESH.BND_2DFROM3D, SMESH.BND_1DFROM3D, SMESH.BND_1DFROM2D }
# SMESH.BND_1DFROM3D creates mesh edges on all borders of free facets of 3D cells
# @param groupName - a name of group to store created boundary elements in,
# "" means not to create the group
##
# @brief Creates missing boundary elements around either the whole mesh or
- # groups of 2D elements
- # @param dimension - defines type of boundary elements to create
+ # groups of elements
+ # @param dimension - defines type of boundary elements to create, either of
+ # { SMESH.BND_2DFROM3D, SMESH.BND_1DFROM3D, SMESH.BND_1DFROM2D }
# @param groupName - a name of group to store all boundary elements in,
# "" means not to create the group
# @param meshName - a name of a new mesh, which is a copy of the initial
# mesh + created boundary elements; "" means not to create the new mesh
# @param toCopyAll - if true, the whole initial mesh will be copied into
# the new mesh else only boundary elements will be copied into the new mesh
- # @param groups - groups of 2D elements to make boundary around
+ # @param groups - groups of elements to make boundary around
# @retval tuple( long, mesh, groups )
# long - number of added boundary elements
# mesh - the mesh where elements were added to
if mesh: mesh = self.smeshpyD.Mesh(mesh)
return nb, mesh, group
- ## Renumber mesh nodes
+ ## Renumber mesh nodes (Obsolete, does nothing)
# @ingroup l2_modif_renumber
def RenumberNodes(self):
self.editor.RenumberNodes()
- ## Renumber mesh elements
+ ## Renumber mesh elements (Obsole, does nothing)
# @ingroup l2_modif_renumber
def RenumberElements(self):
self.editor.RenumberElements()
- ## Generates new elements by rotation of the elements around the axis
- # @param IDsOfElements the list of ids of elements to sweep
- # @param Axis the axis of rotation, AxisStruct or line(geom object)
- # @param AngleInRadians the angle of Rotation (in radians) or a name of variable which defines angle in degrees
+ ## Private method converting \a arg into a list of SMESH_IdSource's
+ def _getIdSourceList(self, arg, idType, unRegister):
+ if arg and isinstance( arg, list ):
+ if isinstance( arg[0], int ):
+ arg = self.GetIDSource( arg, idType )
+ unRegister.set( arg )
+ elif isinstance( arg[0], Mesh ):
+ arg[0] = arg[0].GetMesh()
+ elif isinstance( arg, Mesh ):
+ arg = arg.GetMesh()
+ if arg and isinstance( arg, SMESH._objref_SMESH_IDSource ):
+ arg = [arg]
+ return arg
+
+ ## Generates new elements by rotation of the given elements and nodes around the axis
+ # @param nodes - nodes to revolve: a list including ids, groups, sub-meshes or a mesh
+ # @param edges - edges to revolve: a list including ids, groups, sub-meshes or a mesh
+ # @param faces - faces to revolve: a list including ids, groups, sub-meshes or a mesh
+ # @param Axis the axis of rotation: AxisStruct, line (geom object) or [x,y,z,dx,dy,dz]
+ # @param AngleInRadians the angle of Rotation (in radians) or a name of variable
+ # which defines angle in degrees
# @param NbOfSteps the number of steps
# @param Tolerance tolerance
# @param MakeGroups forces the generation of new groups from existing ones
# of all steps, else - size of each step
# @return the list of created groups (SMESH_GroupBase) if MakeGroups=True, empty list otherwise
# @ingroup l2_modif_extrurev
- def RotationSweep(self, IDsOfElements, Axis, AngleInRadians, NbOfSteps, Tolerance,
- MakeGroups=False, TotalAngle=False):
- if IDsOfElements == []:
- IDsOfElements = self.GetElementsId()
- if ( isinstance( Axis, geomBuilder.GEOM._objref_GEOM_Object)):
- Axis = self.smeshpyD.GetAxisStruct(Axis)
+ def RotationSweepObjects(self, nodes, edges, faces, Axis, AngleInRadians, NbOfSteps, Tolerance,
+ MakeGroups=False, TotalAngle=False):
+ unRegister = genObjUnRegister()
+ nodes = self._getIdSourceList( nodes, SMESH.NODE, unRegister )
+ edges = self._getIdSourceList( edges, SMESH.EDGE, unRegister )
+ faces = self._getIdSourceList( faces, SMESH.FACE, unRegister )
+
+ if isinstance( Axis, geomBuilder.GEOM._objref_GEOM_Object):
+ Axis = self.smeshpyD.GetAxisStruct( Axis )
+ if isinstance( Axis, list ):
+ Axis = SMESH.AxisStruct( *Axis )
+
AngleInRadians,AngleParameters,hasVars = ParseAngles(AngleInRadians)
NbOfSteps,Tolerance,Parameters,hasVars = ParseParameters(NbOfSteps,Tolerance)
Parameters = Axis.parameters + var_separator + AngleParameters + var_separator + Parameters
self.mesh.SetParameters(Parameters)
if TotalAngle and NbOfSteps:
AngleInRadians /= NbOfSteps
- if MakeGroups:
- return self.editor.RotationSweepMakeGroups(IDsOfElements, Axis,
- AngleInRadians, NbOfSteps, Tolerance)
- self.editor.RotationSweep(IDsOfElements, Axis, AngleInRadians, NbOfSteps, Tolerance)
- return []
+ return self.editor.RotationSweepObjects( nodes, edges, faces,
+ Axis, AngleInRadians,
+ NbOfSteps, Tolerance, MakeGroups)
+
+ ## Generates new elements by rotation of the elements around the axis
+ # @param IDsOfElements the list of ids of elements to sweep
+ # @param Axis the axis of rotation, AxisStruct or line(geom object)
+ # @param AngleInRadians the angle of Rotation (in radians) or a name of variable which defines angle in degrees
+ # @param NbOfSteps the number of steps
+ # @param Tolerance tolerance
+ # @param MakeGroups forces the generation of new groups from existing ones
+ # @param TotalAngle gives meaning of AngleInRadians: if True then it is an angular size
+ # of all steps, else - size of each step
+ # @return the list of created groups (SMESH_GroupBase) if MakeGroups=True, empty list otherwise
+ # @ingroup l2_modif_extrurev
+ def RotationSweep(self, IDsOfElements, Axis, AngleInRadians, NbOfSteps, Tolerance,
+ MakeGroups=False, TotalAngle=False):
+ return self.RotationSweepObjects([], IDsOfElements, IDsOfElements, Axis,
+ AngleInRadians, NbOfSteps, Tolerance,
+ MakeGroups, TotalAngle)
## Generates new elements by rotation of the elements of object around the axis
# @param theObject object which elements should be sweeped.
# @ingroup l2_modif_extrurev
def RotationSweepObject(self, theObject, Axis, AngleInRadians, NbOfSteps, Tolerance,
MakeGroups=False, TotalAngle=False):
- if ( isinstance( theObject, Mesh )):
- theObject = theObject.GetMesh()
- if ( isinstance( Axis, geomBuilder.GEOM._objref_GEOM_Object)):
- Axis = self.smeshpyD.GetAxisStruct(Axis)
- AngleInRadians,AngleParameters,hasVars = ParseAngles(AngleInRadians)
- NbOfSteps,Tolerance,Parameters,hasVars = ParseParameters(NbOfSteps,Tolerance)
- Parameters = Axis.parameters + var_separator + AngleParameters + var_separator + Parameters
- self.mesh.SetParameters(Parameters)
- if TotalAngle and NbOfSteps:
- AngleInRadians /= NbOfSteps
- if MakeGroups:
- return self.editor.RotationSweepObjectMakeGroups(theObject, Axis, AngleInRadians,
- NbOfSteps, Tolerance)
- self.editor.RotationSweepObject(theObject, Axis, AngleInRadians, NbOfSteps, Tolerance)
- return []
+ return self.RotationSweepObjects( [], theObject, theObject, Axis,
+ AngleInRadians, NbOfSteps, Tolerance,
+ MakeGroups, TotalAngle )
## Generates new elements by rotation of the elements of object around the axis
# @param theObject object which elements should be sweeped.
# @ingroup l2_modif_extrurev
def RotationSweepObject1D(self, theObject, Axis, AngleInRadians, NbOfSteps, Tolerance,
MakeGroups=False, TotalAngle=False):
- if ( isinstance( theObject, Mesh )):
- theObject = theObject.GetMesh()
- if ( isinstance( Axis, geomBuilder.GEOM._objref_GEOM_Object)):
- Axis = self.smeshpyD.GetAxisStruct(Axis)
- AngleInRadians,AngleParameters,hasVars = ParseAngles(AngleInRadians)
- NbOfSteps,Tolerance,Parameters,hasVars = ParseParameters(NbOfSteps,Tolerance)
- Parameters = Axis.parameters + var_separator + AngleParameters + var_separator + Parameters
- self.mesh.SetParameters(Parameters)
- if TotalAngle and NbOfSteps:
- AngleInRadians /= NbOfSteps
- if MakeGroups:
- return self.editor.RotationSweepObject1DMakeGroups(theObject, Axis, AngleInRadians,
- NbOfSteps, Tolerance)
- self.editor.RotationSweepObject1D(theObject, Axis, AngleInRadians, NbOfSteps, Tolerance)
- return []
+ return self.RotationSweepObjects([],theObject,[], Axis,
+ AngleInRadians, NbOfSteps, Tolerance,
+ MakeGroups, TotalAngle)
## Generates new elements by rotation of the elements of object around the axis
# @param theObject object which elements should be sweeped.
# @ingroup l2_modif_extrurev
def RotationSweepObject2D(self, theObject, Axis, AngleInRadians, NbOfSteps, Tolerance,
MakeGroups=False, TotalAngle=False):
- if ( isinstance( theObject, Mesh )):
- theObject = theObject.GetMesh()
- if ( isinstance( Axis, geomBuilder.GEOM._objref_GEOM_Object)):
- Axis = self.smeshpyD.GetAxisStruct(Axis)
- AngleInRadians,AngleParameters,hasVars = ParseAngles(AngleInRadians)
- NbOfSteps,Tolerance,Parameters,hasVars = ParseParameters(NbOfSteps,Tolerance)
- Parameters = Axis.parameters + var_separator + AngleParameters + var_separator + Parameters
- self.mesh.SetParameters(Parameters)
- if TotalAngle and NbOfSteps:
- AngleInRadians /= NbOfSteps
- if MakeGroups:
- return self.editor.RotationSweepObject2DMakeGroups(theObject, Axis, AngleInRadians,
- NbOfSteps, Tolerance)
- self.editor.RotationSweepObject2D(theObject, Axis, AngleInRadians, NbOfSteps, Tolerance)
- return []
+ return self.RotationSweepObjects([],[],theObject, Axis, AngleInRadians,
+ NbOfSteps, Tolerance, MakeGroups, TotalAngle)
- ## Generates new elements by extrusion of the elements with given ids
- # @param IDsOfElements the list of elements ids for extrusion
+ ## Generates new elements by extrusion of the given elements and nodes
+ # @param nodes nodes to extrude: a list including ids, groups, sub-meshes or a mesh
+ # @param edges edges to extrude: a list including ids, groups, sub-meshes or a mesh
+ # @param faces faces to extrude: a list including ids, groups, sub-meshes or a mesh
# @param StepVector vector or DirStruct or 3 vector components, defining
# the direction and value of extrusion for one step (the total extrusion
# length will be NbOfSteps * ||StepVector||)
# @param NbOfSteps the number of steps
# @param MakeGroups forces the generation of new groups from existing ones
- # @param IsNodes is True if elements with given ids are nodes
+ # @param scaleFactors optional scale factors to apply during extrusion
+ # @param linearVariation if @c True, scaleFactors are spread over all @a scaleFactors,
+ # else scaleFactors[i] is applied to nodes at the i-th extrusion step
+ # @param basePoint optional scaling center; if not provided, a gravity center of
+ # nodes and elements being extruded is used as the scaling center.
+ # It can be either
+ # - a list of tree components of the point or
+ # - a node ID or
+ # - a GEOM point
# @return the list of created groups (SMESH_GroupBase) if MakeGroups=True, empty list otherwise
# @ingroup l2_modif_extrurev
- def ExtrusionSweep(self, IDsOfElements, StepVector, NbOfSteps, MakeGroups=False, IsNodes = False):
- if IDsOfElements == []:
- IDsOfElements = self.GetElementsId()
+ def ExtrusionSweepObjects(self, nodes, edges, faces, StepVector, NbOfSteps, MakeGroups=False,
+ scaleFactors=[], linearVariation=False, basePoint=[] ):
+ unRegister = genObjUnRegister()
+ nodes = self._getIdSourceList( nodes, SMESH.NODE, unRegister )
+ edges = self._getIdSourceList( edges, SMESH.EDGE, unRegister )
+ faces = self._getIdSourceList( faces, SMESH.FACE, unRegister )
+
if isinstance( StepVector, geomBuilder.GEOM._objref_GEOM_Object):
StepVector = self.smeshpyD.GetDirStruct(StepVector)
if isinstance( StepVector, list ):
StepVector = self.smeshpyD.MakeDirStruct(*StepVector)
+
+ if isinstance( basePoint, int):
+ xyz = self.GetNodeXYZ( basePoint )
+ if not xyz:
+ raise RuntimeError, "Invalid node ID: %s" % basePoint
+ basePoint = xyz
+ if isinstance( basePoint, geomBuilder.GEOM._objref_GEOM_Object ):
+ basePoint = self.geompyD.PointCoordinates( basePoint )
+
NbOfSteps,Parameters,hasVars = ParseParameters(NbOfSteps)
Parameters = StepVector.PS.parameters + var_separator + Parameters
self.mesh.SetParameters(Parameters)
- if MakeGroups:
- if(IsNodes):
- return self.editor.ExtrusionSweepMakeGroups0D(IDsOfElements, StepVector, NbOfSteps)
- else:
- return self.editor.ExtrusionSweepMakeGroups(IDsOfElements, StepVector, NbOfSteps)
- if(IsNodes):
- self.editor.ExtrusionSweep0D(IDsOfElements, StepVector, NbOfSteps)
- else:
- self.editor.ExtrusionSweep(IDsOfElements, StepVector, NbOfSteps)
- return []
+
+ return self.editor.ExtrusionSweepObjects( nodes, edges, faces,
+ StepVector, NbOfSteps,
+ scaleFactors, linearVariation, basePoint,
+ MakeGroups)
+
## Generates new elements by extrusion of the elements with given ids
- # @param IDsOfElements is ids of elements
+ # @param IDsOfElements the list of ids of elements or nodes for extrusion
# @param StepVector vector or DirStruct or 3 vector components, defining
# the direction and value of extrusion for one step (the total extrusion
# length will be NbOfSteps * ||StepVector||)
# @param NbOfSteps the number of steps
- # @param ExtrFlags sets flags for extrusion
- # @param SewTolerance uses for comparing locations of nodes if flag
- # EXTRUSION_FLAG_SEW is set
# @param MakeGroups forces the generation of new groups from existing ones
- # @return list of created groups (SMESH_GroupBase) if MakeGroups=True, empty list otherwise
+ # @param IsNodes is True if elements with given ids are nodes
+ # @return the list of created groups (SMESH_GroupBase) if MakeGroups=True, empty list otherwise
# @ingroup l2_modif_extrurev
- def AdvancedExtrusion(self, IDsOfElements, StepVector, NbOfSteps,
- ExtrFlags, SewTolerance, MakeGroups=False):
- if ( isinstance( StepVector, geomBuilder.GEOM._objref_GEOM_Object)):
- StepVector = self.smeshpyD.GetDirStruct(StepVector)
- if isinstance( StepVector, list ):
- StepVector = self.smeshpyD.MakeDirStruct(*StepVector)
- if MakeGroups:
- return self.editor.AdvancedExtrusionMakeGroups(IDsOfElements, StepVector, NbOfSteps,
- ExtrFlags, SewTolerance)
- self.editor.AdvancedExtrusion(IDsOfElements, StepVector, NbOfSteps,
- ExtrFlags, SewTolerance)
- return []
+ def ExtrusionSweep(self, IDsOfElements, StepVector, NbOfSteps, MakeGroups=False, IsNodes = False):
+ n,e,f = [],[],[]
+ if IsNodes: n = IDsOfElements
+ else : e,f, = IDsOfElements,IDsOfElements
+ return self.ExtrusionSweepObjects(n,e,f, StepVector, NbOfSteps, MakeGroups)
+
+ ## Generates new elements by extrusion along the normal to a discretized surface or wire
+ # @param Elements elements to extrude - a list including ids, groups, sub-meshes or a mesh.
+ # Only faces can be extruded so far. A sub-mesh should be a sub-mesh on geom faces.
+ # @param StepSize length of one extrusion step (the total extrusion
+ # length will be \a NbOfSteps * \a StepSize ).
+ # @param NbOfSteps number of extrusion steps.
+ # @param ByAverageNormal if True each node is translated by \a StepSize
+ # along the average of the normal vectors to the faces sharing the node;
+ # else each node is translated along the same average normal till
+ # intersection with the plane got by translation of the face sharing
+ # the node along its own normal by \a StepSize.
+ # @param UseInputElemsOnly to use only \a Elements when computing extrusion direction
+ # for every node of \a Elements.
+ # @param MakeGroups forces generation of new groups from existing ones.
+ # @param Dim dimension of elements to extrude: 2 - faces or 1 - edges. Extrusion of edges
+ # is not yet implemented. This parameter is used if \a Elements contains
+ # both faces and edges, i.e. \a Elements is a Mesh.
+ # @return the list of created groups (SMESH_GroupBase) if \a MakeGroups=True,
+ # empty list otherwise.
+ # @ingroup l2_modif_extrurev
+ def ExtrusionByNormal(self, Elements, StepSize, NbOfSteps,
+ ByAverageNormal=False, UseInputElemsOnly=True, MakeGroups=False, Dim = 2):
+ unRegister = genObjUnRegister()
+ if isinstance( Elements, Mesh ):
+ Elements = [ Elements.GetMesh() ]
+ if isinstance( Elements, list ):
+ if not Elements:
+ raise RuntimeError, "Elements empty!"
+ if isinstance( Elements[0], int ):
+ Elements = self.GetIDSource( Elements, SMESH.ALL )
+ unRegister.set( Elements )
+ if not isinstance( Elements, list ):
+ Elements = [ Elements ]
+ StepSize,NbOfSteps,Parameters,hasVars = ParseParameters(StepSize,NbOfSteps)
+ self.mesh.SetParameters(Parameters)
+ return self.editor.ExtrusionByNormal(Elements, StepSize, NbOfSteps,
+ ByAverageNormal, UseInputElemsOnly, MakeGroups, Dim)
- ## Generates new elements by extrusion of the elements which belong to the object
- # @param theObject the object which elements should be processed.
- # It can be a mesh, a sub mesh or a group.
+ ## Generates new elements by extrusion of the elements or nodes which belong to the object
+ # @param theObject the object whose elements or nodes should be processed.
+ # It can be a mesh, a sub-mesh or a group.
# @param StepVector vector or DirStruct or 3 vector components, defining
# the direction and value of extrusion for one step (the total extrusion
# length will be NbOfSteps * ||StepVector||)
# @param NbOfSteps the number of steps
# @param MakeGroups forces the generation of new groups from existing ones
- # @param IsNodes is True if elements which belong to the object are nodes
+ # @param IsNodes is True if elements to extrude are nodes
# @return list of created groups (SMESH_GroupBase) if MakeGroups=True, empty list otherwise
# @ingroup l2_modif_extrurev
def ExtrusionSweepObject(self, theObject, StepVector, NbOfSteps, MakeGroups=False, IsNodes=False):
- if ( isinstance( theObject, Mesh )):
- theObject = theObject.GetMesh()
- if ( isinstance( StepVector, geomBuilder.GEOM._objref_GEOM_Object)):
- StepVector = self.smeshpyD.GetDirStruct(StepVector)
- if isinstance( StepVector, list ):
- StepVector = self.smeshpyD.MakeDirStruct(*StepVector)
- NbOfSteps,Parameters,hasVars = ParseParameters(NbOfSteps)
- Parameters = StepVector.PS.parameters + var_separator + Parameters
- self.mesh.SetParameters(Parameters)
- if MakeGroups:
- if(IsNodes):
- return self.editor.ExtrusionSweepObject0DMakeGroups(theObject, StepVector, NbOfSteps)
- else:
- return self.editor.ExtrusionSweepObjectMakeGroups(theObject, StepVector, NbOfSteps)
- if(IsNodes):
- self.editor.ExtrusionSweepObject0D(theObject, StepVector, NbOfSteps)
- else:
- self.editor.ExtrusionSweepObject(theObject, StepVector, NbOfSteps)
- return []
-
- ## Generates new elements by extrusion of the elements which belong to the object
- # @param theObject object which elements should be processed.
- # It can be a mesh, a sub mesh or a group.
+ n,e,f = [],[],[]
+ if IsNodes: n = theObject
+ else : e,f, = theObject,theObject
+ return self.ExtrusionSweepObjects(n,e,f, StepVector, NbOfSteps, MakeGroups)
+
+ ## Generates new elements by extrusion of edges which belong to the object
+ # @param theObject object whose 1D elements should be processed.
+ # It can be a mesh, a sub-mesh or a group.
# @param StepVector vector or DirStruct or 3 vector components, defining
# the direction and value of extrusion for one step (the total extrusion
# length will be NbOfSteps * ||StepVector||)
# @return list of created groups (SMESH_GroupBase) if MakeGroups=True, empty list otherwise
# @ingroup l2_modif_extrurev
def ExtrusionSweepObject1D(self, theObject, StepVector, NbOfSteps, MakeGroups=False):
- if ( isinstance( theObject, Mesh )):
- theObject = theObject.GetMesh()
- if ( isinstance( StepVector, geomBuilder.GEOM._objref_GEOM_Object)):
- StepVector = self.smeshpyD.GetDirStruct(StepVector)
- if isinstance( StepVector, list ):
- StepVector = self.smeshpyD.MakeDirStruct(*StepVector)
- NbOfSteps,Parameters,hasVars = ParseParameters(NbOfSteps)
- Parameters = StepVector.PS.parameters + var_separator + Parameters
- self.mesh.SetParameters(Parameters)
- if MakeGroups:
- return self.editor.ExtrusionSweepObject1DMakeGroups(theObject, StepVector, NbOfSteps)
- self.editor.ExtrusionSweepObject1D(theObject, StepVector, NbOfSteps)
- return []
+ return self.ExtrusionSweepObjects([],theObject,[], StepVector, NbOfSteps, MakeGroups)
- ## Generates new elements by extrusion of the elements which belong to the object
- # @param theObject object which elements should be processed.
- # It can be a mesh, a sub mesh or a group.
+ ## Generates new elements by extrusion of faces which belong to the object
+ # @param theObject object whose 2D elements should be processed.
+ # It can be a mesh, a sub-mesh or a group.
# @param StepVector vector or DirStruct or 3 vector components, defining
# the direction and value of extrusion for one step (the total extrusion
# length will be NbOfSteps * ||StepVector||)
# @return list of created groups (SMESH_GroupBase) if MakeGroups=True, empty list otherwise
# @ingroup l2_modif_extrurev
def ExtrusionSweepObject2D(self, theObject, StepVector, NbOfSteps, MakeGroups=False):
- if ( isinstance( theObject, Mesh )):
- theObject = theObject.GetMesh()
- if ( isinstance( StepVector, geomBuilder.GEOM._objref_GEOM_Object)):
+ return self.ExtrusionSweepObjects([],[],theObject, StepVector, NbOfSteps, MakeGroups)
+
+ ## Generates new elements by extrusion of the elements with given ids
+ # @param IDsOfElements is ids of elements
+ # @param StepVector vector or DirStruct or 3 vector components, defining
+ # the direction and value of extrusion for one step (the total extrusion
+ # length will be NbOfSteps * ||StepVector||)
+ # @param NbOfSteps the number of steps
+ # @param ExtrFlags sets flags for extrusion
+ # @param SewTolerance uses for comparing locations of nodes if flag
+ # EXTRUSION_FLAG_SEW is set
+ # @param MakeGroups forces the generation of new groups from existing ones
+ # @return list of created groups (SMESH_GroupBase) if MakeGroups=True, empty list otherwise
+ # @ingroup l2_modif_extrurev
+ def AdvancedExtrusion(self, IDsOfElements, StepVector, NbOfSteps,
+ ExtrFlags, SewTolerance, MakeGroups=False):
+ if isinstance( StepVector, geomBuilder.GEOM._objref_GEOM_Object):
StepVector = self.smeshpyD.GetDirStruct(StepVector)
if isinstance( StepVector, list ):
StepVector = self.smeshpyD.MakeDirStruct(*StepVector)
- NbOfSteps,Parameters,hasVars = ParseParameters(NbOfSteps)
- Parameters = StepVector.PS.parameters + var_separator + Parameters
- self.mesh.SetParameters(Parameters)
- if MakeGroups:
- return self.editor.ExtrusionSweepObject2DMakeGroups(theObject, StepVector, NbOfSteps)
- self.editor.ExtrusionSweepObject2D(theObject, StepVector, NbOfSteps)
- return []
+ return self.editor.AdvancedExtrusion(IDsOfElements, StepVector, NbOfSteps,
+ ExtrFlags, SewTolerance, MakeGroups)
+ ## Generates new elements by extrusion of the given elements and nodes along the path.
+ # The path of extrusion must be a meshed edge.
+ # @param Nodes nodes to extrude: a list including ids, groups, sub-meshes or a mesh
+ # @param Edges edges to extrude: a list including ids, groups, sub-meshes or a mesh
+ # @param Faces faces to extrude: a list including ids, groups, sub-meshes or a mesh
+ # @param PathMesh 1D mesh or 1D sub-mesh, along which proceeds the extrusion
+ # @param PathShape shape (edge) defines the sub-mesh of PathMesh if PathMesh
+ # contains not only path segments, else it can be None
+ # @param NodeStart the first or the last node on the path. Defines the direction of extrusion
+ # @param HasAngles allows the shape to be rotated around the path
+ # to get the resulting mesh in a helical fashion
+ # @param Angles list of angles
+ # @param LinearVariation forces the computation of rotation angles as linear
+ # variation of the given Angles along path steps
+ # @param HasRefPoint allows using the reference point
+ # @param RefPoint the point around which the shape is rotated (the mass center of the
+ # shape by default). The User can specify any point as the Reference Point.
+ # @param MakeGroups forces the generation of new groups from existing ones
+ # @return list of created groups (SMESH_GroupBase) and SMESH::Extrusion_Error
+ # @ingroup l2_modif_extrurev
+ def ExtrusionAlongPathObjects(self, Nodes, Edges, Faces, PathMesh, PathShape=None,
+ NodeStart=1, HasAngles=False, Angles=[], LinearVariation=False,
+ HasRefPoint=False, RefPoint=[0,0,0], MakeGroups=False):
+ unRegister = genObjUnRegister()
+ Nodes = self._getIdSourceList( Nodes, SMESH.NODE, unRegister )
+ Edges = self._getIdSourceList( Edges, SMESH.EDGE, unRegister )
+ Faces = self._getIdSourceList( Faces, SMESH.FACE, unRegister )
+ if isinstance( RefPoint, geomBuilder.GEOM._objref_GEOM_Object):
+ RefPoint = self.smeshpyD.GetPointStruct(RefPoint)
+ if isinstance( RefPoint, list ):
+ if not RefPoint: RefPoint = [0,0,0]
+ RefPoint = SMESH.PointStruct( *RefPoint )
+ if isinstance( PathMesh, Mesh ):
+ PathMesh = PathMesh.GetMesh()
+ Angles,AnglesParameters,hasVars = ParseAngles(Angles)
+ Parameters = AnglesParameters + var_separator + RefPoint.parameters
+ self.mesh.SetParameters(Parameters)
+ return self.editor.ExtrusionAlongPathObjects(Nodes, Edges, Faces,
+ PathMesh, PathShape, NodeStart,
+ HasAngles, Angles, LinearVariation,
+ HasRefPoint, RefPoint, MakeGroups)
## Generates new elements by extrusion of the given elements
# The path of extrusion must be a meshed edge.
- # @param Base mesh or group, or submesh, or list of ids of elements for extrusion
+ # @param Base mesh or group, or sub-mesh, or list of ids of elements for extrusion
# @param Path - 1D mesh or 1D sub-mesh, along which proceeds the extrusion
# @param NodeStart the start node from Path. Defines the direction of extrusion
# @param HasAngles allows the shape to be rotated around the path
# only SMESH::Extrusion_Error otherwise
# @ingroup l2_modif_extrurev
def ExtrusionAlongPathX(self, Base, Path, NodeStart,
- HasAngles, Angles, LinearVariation,
- HasRefPoint, RefPoint, MakeGroups, ElemType):
- if isinstance( RefPoint, geomBuilder.GEOM._objref_GEOM_Object):
- RefPoint = self.smeshpyD.GetPointStruct(RefPoint)
- pass
- elif isinstance( RefPoint, list ):
- RefPoint = PointStruct(*RefPoint)
- pass
- Angles,AnglesParameters,hasVars = ParseAngles(Angles)
- Parameters = AnglesParameters + var_separator + RefPoint.parameters
- self.mesh.SetParameters(Parameters)
-
- if (isinstance(Path, Mesh)): Path = Path.GetMesh()
-
- if isinstance(Base, list):
- IDsOfElements = []
- if Base == []: IDsOfElements = self.GetElementsId()
- else: IDsOfElements = Base
- return self.editor.ExtrusionAlongPathX(IDsOfElements, Path, NodeStart,
- HasAngles, Angles, LinearVariation,
- HasRefPoint, RefPoint, MakeGroups, ElemType)
- else:
- if isinstance(Base, Mesh): Base = Base.GetMesh()
- if isinstance(Base, SMESH._objref_SMESH_Mesh) or isinstance(Base, SMESH._objref_SMESH_Group) or isinstance(Base, SMESH._objref_SMESH_subMesh):
- return self.editor.ExtrusionAlongPathObjX(Base, Path, NodeStart,
- HasAngles, Angles, LinearVariation,
- HasRefPoint, RefPoint, MakeGroups, ElemType)
- else:
- raise RuntimeError, "Invalid Base for ExtrusionAlongPathX"
-
+ HasAngles=False, Angles=[], LinearVariation=False,
+ HasRefPoint=False, RefPoint=[0,0,0], MakeGroups=False,
+ ElemType=SMESH.FACE):
+ n,e,f = [],[],[]
+ if ElemType == SMESH.NODE: n = Base
+ if ElemType == SMESH.EDGE: e = Base
+ if ElemType == SMESH.FACE: f = Base
+ gr,er = self.ExtrusionAlongPathObjects(n,e,f, Path, None, NodeStart,
+ HasAngles, Angles, LinearVariation,
+ HasRefPoint, RefPoint, MakeGroups)
+ if MakeGroups: return gr,er
+ return er
## Generates new elements by extrusion of the given elements
# The path of extrusion must be a meshed edge.
# only SMESH::Extrusion_Error otherwise
# @ingroup l2_modif_extrurev
def ExtrusionAlongPath(self, IDsOfElements, PathMesh, PathShape, NodeStart,
- HasAngles, Angles, HasRefPoint, RefPoint,
+ HasAngles=False, Angles=[], HasRefPoint=False, RefPoint=[],
MakeGroups=False, LinearVariation=False):
- if IDsOfElements == []:
- IDsOfElements = self.GetElementsId()
- if ( isinstance( RefPoint, geomBuilder.GEOM._objref_GEOM_Object)):
- RefPoint = self.smeshpyD.GetPointStruct(RefPoint)
- pass
- if ( isinstance( PathMesh, Mesh )):
- PathMesh = PathMesh.GetMesh()
- Angles,AnglesParameters,hasVars = ParseAngles(Angles)
- Parameters = AnglesParameters + var_separator + RefPoint.parameters
- self.mesh.SetParameters(Parameters)
- if HasAngles and Angles and LinearVariation:
- Angles = self.editor.LinearAnglesVariation( PathMesh, PathShape, Angles )
- pass
- if MakeGroups:
- return self.editor.ExtrusionAlongPathMakeGroups(IDsOfElements, PathMesh,
- PathShape, NodeStart, HasAngles,
- Angles, HasRefPoint, RefPoint)
- return self.editor.ExtrusionAlongPath(IDsOfElements, PathMesh, PathShape,
- NodeStart, HasAngles, Angles, HasRefPoint, RefPoint)
+ n,e,f = [],IDsOfElements,IDsOfElements
+ gr,er = self.ExtrusionAlongPathObjects(n,e,f, PathMesh, PathShape,
+ NodeStart, HasAngles, Angles,
+ LinearVariation,
+ HasRefPoint, RefPoint, MakeGroups)
+ if MakeGroups: return gr,er
+ return er
## Generates new elements by extrusion of the elements which belong to the object
# The path of extrusion must be a meshed edge.
- # @param theObject the object which elements should be processed.
- # It can be a mesh, a sub mesh or a group.
+ # @param theObject the object whose elements should be processed.
+ # It can be a mesh, a sub-mesh or a group.
# @param PathMesh mesh containing a 1D sub-mesh on the edge, along which the extrusion proceeds
# @param PathShape shape(edge) defines the sub-mesh for the path
# @param NodeStart the first or the last node on the edge. Defines the direction of extrusion
# only SMESH::Extrusion_Error otherwise
# @ingroup l2_modif_extrurev
def ExtrusionAlongPathObject(self, theObject, PathMesh, PathShape, NodeStart,
- HasAngles, Angles, HasRefPoint, RefPoint,
+ HasAngles=False, Angles=[], HasRefPoint=False, RefPoint=[],
MakeGroups=False, LinearVariation=False):
- if ( isinstance( theObject, Mesh )):
- theObject = theObject.GetMesh()
- if ( isinstance( RefPoint, geomBuilder.GEOM._objref_GEOM_Object)):
- RefPoint = self.smeshpyD.GetPointStruct(RefPoint)
- if ( isinstance( PathMesh, Mesh )):
- PathMesh = PathMesh.GetMesh()
- Angles,AnglesParameters,hasVars = ParseAngles(Angles)
- Parameters = AnglesParameters + var_separator + RefPoint.parameters
- self.mesh.SetParameters(Parameters)
- if HasAngles and Angles and LinearVariation:
- Angles = self.editor.LinearAnglesVariation( PathMesh, PathShape, Angles )
- pass
- if MakeGroups:
- return self.editor.ExtrusionAlongPathObjectMakeGroups(theObject, PathMesh,
- PathShape, NodeStart, HasAngles,
- Angles, HasRefPoint, RefPoint)
- return self.editor.ExtrusionAlongPathObject(theObject, PathMesh, PathShape,
- NodeStart, HasAngles, Angles, HasRefPoint,
- RefPoint)
-
- ## Generates new elements by extrusion of the elements which belong to the object
+ n,e,f = [],theObject,theObject
+ gr,er = self.ExtrusionAlongPathObjects(n,e,f, PathMesh, PathShape, NodeStart,
+ HasAngles, Angles, LinearVariation,
+ HasRefPoint, RefPoint, MakeGroups)
+ if MakeGroups: return gr,er
+ return er
+
+ ## Generates new elements by extrusion of mesh segments which belong to the object
# The path of extrusion must be a meshed edge.
- # @param theObject the object which elements should be processed.
- # It can be a mesh, a sub mesh or a group.
+ # @param theObject the object whose 1D elements should be processed.
+ # It can be a mesh, a sub-mesh or a group.
# @param PathMesh mesh containing a 1D sub-mesh on the edge, along which the extrusion proceeds
# @param PathShape shape(edge) defines the sub-mesh for the path
# @param NodeStart the first or the last node on the edge. Defines the direction of extrusion
# only SMESH::Extrusion_Error otherwise
# @ingroup l2_modif_extrurev
def ExtrusionAlongPathObject1D(self, theObject, PathMesh, PathShape, NodeStart,
- HasAngles, Angles, HasRefPoint, RefPoint,
+ HasAngles=False, Angles=[], HasRefPoint=False, RefPoint=[],
MakeGroups=False, LinearVariation=False):
- if ( isinstance( theObject, Mesh )):
- theObject = theObject.GetMesh()
- if ( isinstance( RefPoint, geomBuilder.GEOM._objref_GEOM_Object)):
- RefPoint = self.smeshpyD.GetPointStruct(RefPoint)
- if ( isinstance( PathMesh, Mesh )):
- PathMesh = PathMesh.GetMesh()
- Angles,AnglesParameters,hasVars = ParseAngles(Angles)
- Parameters = AnglesParameters + var_separator + RefPoint.parameters
- self.mesh.SetParameters(Parameters)
- if HasAngles and Angles and LinearVariation:
- Angles = self.editor.LinearAnglesVariation( PathMesh, PathShape, Angles )
- pass
- if MakeGroups:
- return self.editor.ExtrusionAlongPathObject1DMakeGroups(theObject, PathMesh,
- PathShape, NodeStart, HasAngles,
- Angles, HasRefPoint, RefPoint)
- return self.editor.ExtrusionAlongPathObject1D(theObject, PathMesh, PathShape,
- NodeStart, HasAngles, Angles, HasRefPoint,
- RefPoint)
-
- ## Generates new elements by extrusion of the elements which belong to the object
+ n,e,f = [],theObject,[]
+ gr,er = self.ExtrusionAlongPathObjects(n,e,f, PathMesh, PathShape, NodeStart,
+ HasAngles, Angles, LinearVariation,
+ HasRefPoint, RefPoint, MakeGroups)
+ if MakeGroups: return gr,er
+ return er
+
+ ## Generates new elements by extrusion of faces which belong to the object
# The path of extrusion must be a meshed edge.
- # @param theObject the object which elements should be processed.
- # It can be a mesh, a sub mesh or a group.
+ # @param theObject the object whose 2D elements should be processed.
+ # It can be a mesh, a sub-mesh or a group.
# @param PathMesh mesh containing a 1D sub-mesh on the edge, along which the extrusion proceeds
# @param PathShape shape(edge) defines the sub-mesh for the path
# @param NodeStart the first or the last node on the edge. Defines the direction of extrusion
# only SMESH::Extrusion_Error otherwise
# @ingroup l2_modif_extrurev
def ExtrusionAlongPathObject2D(self, theObject, PathMesh, PathShape, NodeStart,
- HasAngles, Angles, HasRefPoint, RefPoint,
+ HasAngles=False, Angles=[], HasRefPoint=False, RefPoint=[],
MakeGroups=False, LinearVariation=False):
- if ( isinstance( theObject, Mesh )):
- theObject = theObject.GetMesh()
- if ( isinstance( RefPoint, geomBuilder.GEOM._objref_GEOM_Object)):
- RefPoint = self.smeshpyD.GetPointStruct(RefPoint)
- if ( isinstance( PathMesh, Mesh )):
- PathMesh = PathMesh.GetMesh()
- Angles,AnglesParameters,hasVars = ParseAngles(Angles)
- Parameters = AnglesParameters + var_separator + RefPoint.parameters
- self.mesh.SetParameters(Parameters)
- if HasAngles and Angles and LinearVariation:
- Angles = self.editor.LinearAnglesVariation( PathMesh, PathShape, Angles )
- pass
- if MakeGroups:
- return self.editor.ExtrusionAlongPathObject2DMakeGroups(theObject, PathMesh,
- PathShape, NodeStart, HasAngles,
- Angles, HasRefPoint, RefPoint)
- return self.editor.ExtrusionAlongPathObject2D(theObject, PathMesh, PathShape,
- NodeStart, HasAngles, Angles, HasRefPoint,
- RefPoint)
+ n,e,f = [],[],theObject
+ gr,er = self.ExtrusionAlongPathObjects(n,e,f, PathMesh, PathShape, NodeStart,
+ HasAngles, Angles, LinearVariation,
+ HasRefPoint, RefPoint, MakeGroups)
+ if MakeGroups: return gr,er
+ return er
## Creates a symmetrical copy of mesh elements
# @param IDsOfElements list of elements ids
# @param Mirror is AxisStruct or geom object(point, line, plane)
- # @param theMirrorType is POINT, AXIS or PLANE
- # If the Mirror is a geom object this parameter is unnecessary
+ # @param theMirrorType smeshBuilder.POINT, smeshBuilder.AXIS or smeshBuilder.PLANE
+ # If the Mirror is a geom object this parameter is unnecessary
# @param Copy allows to copy element (Copy is 1) or to replace with its mirroring (Copy is 0)
# @param MakeGroups forces the generation of new groups from existing ones (if Copy)
# @return list of created groups (SMESH_GroupBase) if MakeGroups=True, empty list otherwise
## Creates a new mesh by a symmetrical copy of mesh elements
# @param IDsOfElements the list of elements ids
# @param Mirror is AxisStruct or geom object (point, line, plane)
- # @param theMirrorType is POINT, AXIS or PLANE
- # If the Mirror is a geom object this parameter is unnecessary
+ # @param theMirrorType smeshBuilder.POINT, smeshBuilder.AXIS or smeshBuilder.PLANE
+ # If the Mirror is a geom object this parameter is unnecessary
# @param MakeGroups to generate new groups from existing ones
# @param NewMeshName a name of the new mesh to create
# @return instance of Mesh class
## Creates a symmetrical copy of the object
# @param theObject mesh, submesh or group
# @param Mirror AxisStruct or geom object (point, line, plane)
- # @param theMirrorType is POINT, AXIS or PLANE
- # If the Mirror is a geom object this parameter is unnecessary
+ # @param theMirrorType smeshBuilder.POINT, smeshBuilder.AXIS or smeshBuilder.PLANE
+ # If the Mirror is a geom object this parameter is unnecessary
# @param Copy allows copying the element (Copy is 1) or replacing it with its mirror (Copy is 0)
# @param MakeGroups forces the generation of new groups from existing ones (if Copy)
# @return list of created groups (SMESH_GroupBase) if MakeGroups=True, empty list otherwise
## Creates a new mesh by a symmetrical copy of the object
# @param theObject mesh, submesh or group
# @param Mirror AxisStruct or geom object (point, line, plane)
- # @param theMirrorType POINT, AXIS or PLANE
- # If the Mirror is a geom object this parameter is unnecessary
+ # @param theMirrorType smeshBuilder.POINT, smeshBuilder.AXIS or smeshBuilder.PLANE
+ # If the Mirror is a geom object this parameter is unnecessary
# @param MakeGroups forces the generation of new groups from existing ones
# @param NewMeshName the name of the new mesh to create
# @return instance of Mesh class
## Scales the object
# @param theObject - the object to translate (mesh, submesh, or group)
- # @param thePoint - base point for scale
+ # @param thePoint - base point for scale (SMESH.PointStruct or list of 3 coordinates)
# @param theScaleFact - list of 1-3 scale factors for axises
# @param Copy - allows copying the translated elements
# @param MakeGroups - forces the generation of new groups from existing
if ( isinstance( theObject, list )):
theObject = self.GetIDSource(theObject, SMESH.ALL)
unRegister.set( theObject )
+ if ( isinstance( thePoint, list )):
+ thePoint = PointStruct( thePoint[0], thePoint[1], thePoint[2] )
if ( isinstance( theScaleFact, float )):
theScaleFact = [theScaleFact]
if ( isinstance( theScaleFact, int )):
## Creates a new mesh from the translated object
# @param theObject - the object to translate (mesh, submesh, or group)
- # @param thePoint - base point for scale
+ # @param thePoint - base point for scale (SMESH.PointStruct or list of 3 coordinates)
# @param theScaleFact - list of 1-3 scale factors for axises
# @param MakeGroups - forces the generation of new groups from existing ones
# @param NewMeshName - the name of the newly created mesh
if ( isinstance( theObject, list )):
theObject = self.GetIDSource(theObject,SMESH.ALL)
unRegister.set( theObject )
+ if ( isinstance( thePoint, list )):
+ thePoint = PointStruct( thePoint[0], thePoint[1], thePoint[2] )
if ( isinstance( theScaleFact, float )):
theScaleFact = [theScaleFact]
if ( isinstance( theScaleFact, int )):
## Finds groups of adjacent nodes within Tolerance.
# @param Tolerance the value of tolerance
- # @return the list of pairs of nodes IDs (e.g. [[1,12],[25,4]])
+ # @param SeparateCornerAndMediumNodes if @c True, in quadratic mesh puts
+ # corner and medium nodes in separate groups thus preventing
+ # their further merge.
+ # @return the list of groups of nodes IDs (e.g. [[1,12,13],[4,25]])
# @ingroup l2_modif_trsf
- def FindCoincidentNodes (self, Tolerance):
- return self.editor.FindCoincidentNodes(Tolerance)
+ def FindCoincidentNodes (self, Tolerance, SeparateCornerAndMediumNodes=False):
+ return self.editor.FindCoincidentNodes( Tolerance, SeparateCornerAndMediumNodes )
## Finds groups of ajacent nodes within Tolerance.
# @param Tolerance the value of tolerance
- # @param SubMeshOrGroup SubMesh or Group
+ # @param SubMeshOrGroup SubMesh, Group or Filter
# @param exceptNodes list of either SubMeshes, Groups or node IDs to exclude from search
- # @return the list of pairs of nodes IDs (e.g. [[1,12],[25,4]])
+ # @param SeparateCornerAndMediumNodes if @c True, in quadratic mesh puts
+ # corner and medium nodes in separate groups thus preventing
+ # their further merge.
+ # @return the list of groups of nodes IDs (e.g. [[1,12,13],[4,25]])
# @ingroup l2_modif_trsf
- def FindCoincidentNodesOnPart (self, SubMeshOrGroup, Tolerance, exceptNodes=[]):
+ def FindCoincidentNodesOnPart (self, SubMeshOrGroup, Tolerance,
+ exceptNodes=[], SeparateCornerAndMediumNodes=False):
unRegister = genObjUnRegister()
if (isinstance( SubMeshOrGroup, Mesh )):
SubMeshOrGroup = SubMeshOrGroup.GetMesh()
- if not isinstance( exceptNodes, list):
+ if not isinstance( exceptNodes, list ):
exceptNodes = [ exceptNodes ]
- if exceptNodes and isinstance( exceptNodes[0], int):
- exceptNodes = [ self.GetIDSource( exceptNodes, SMESH.NODE)]
+ if exceptNodes and isinstance( exceptNodes[0], int ):
+ exceptNodes = [ self.GetIDSource( exceptNodes, SMESH.NODE )]
unRegister.set( exceptNodes )
- return self.editor.FindCoincidentNodesOnPartBut(SubMeshOrGroup, Tolerance,exceptNodes)
+ return self.editor.FindCoincidentNodesOnPartBut(SubMeshOrGroup, Tolerance,
+ exceptNodes, SeparateCornerAndMediumNodes)
## Merges nodes
- # @param GroupsOfNodes a list of pairs of nodes IDs for merging (e.g. [[1,12],[25,4]])
+ # @param GroupsOfNodes a list of groups of nodes IDs for merging
+ # (e.g. [[1,12,13],[25,4]], then nodes 12, 13 and 4 will be removed and replaced
+ # by nodes 1 and 25 correspondingly in all elements and groups
+ # @param NodesToKeep nodes to keep in the mesh: a list of groups, sub-meshes or node IDs.
+ # If @a NodesToKeep does not include a node to keep for some group to merge,
+ # then the first node in the group is kept.
# @ingroup l2_modif_trsf
- def MergeNodes (self, GroupsOfNodes):
- self.editor.MergeNodes(GroupsOfNodes)
+ def MergeNodes (self, GroupsOfNodes, NodesToKeep=[]):
+ # NodesToKeep are converted to SMESH_IDSource in meshEditor.MergeNodes()
+ self.editor.MergeNodes(GroupsOfNodes,NodesToKeep)
## Finds the elements built on the same nodes.
# @param MeshOrSubMeshOrGroup Mesh or SubMesh, or Group of elements for searching
- # @return the list of pairs of equal elements IDs (e.g. [[1,12],[25,4]])
+ # @return the list of groups of equal elements IDs (e.g. [[1,12,13],[4,25]])
# @ingroup l2_modif_trsf
- def FindEqualElements (self, MeshOrSubMeshOrGroup):
- if ( isinstance( MeshOrSubMeshOrGroup, Mesh )):
+ def FindEqualElements (self, MeshOrSubMeshOrGroup=None):
+ if not MeshOrSubMeshOrGroup:
+ MeshOrSubMeshOrGroup=self.mesh
+ elif isinstance( MeshOrSubMeshOrGroup, Mesh ):
MeshOrSubMeshOrGroup = MeshOrSubMeshOrGroup.GetMesh()
- return self.editor.FindEqualElements(MeshOrSubMeshOrGroup)
+ return self.editor.FindEqualElements( MeshOrSubMeshOrGroup )
## Merges elements in each given group.
- # @param GroupsOfElementsID a list of pairs of elements IDs for merging (e.g. [[1,12],[25,4]])
+ # @param GroupsOfElementsID a list of groups of elements IDs for merging
+ # (e.g. [[1,12,13],[25,4]], then elements 12, 13 and 4 will be removed and
+ # replaced by elements 1 and 25 in all groups)
# @ingroup l2_modif_trsf
def MergeElements(self, GroupsOfElementsID):
self.editor.MergeElements(GroupsOfElementsID)
def MergeEqualElements(self):
self.editor.MergeEqualElements()
+ ## Returns groups of FreeBorder's coincident within the given tolerance.
+ # @param tolerance the tolerance. If the tolerance <= 0.0 then one tenth of an average
+ # size of elements adjacent to free borders being compared is used.
+ # @return SMESH.CoincidentFreeBorders structure
+ # @ingroup l2_modif_trsf
+ def FindCoincidentFreeBorders (self, tolerance=0.):
+ return self.editor.FindCoincidentFreeBorders( tolerance )
+
+ ## Sew FreeBorder's of each group
+ # @param freeBorders either a SMESH.CoincidentFreeBorders structure or a list of lists
+ # where each enclosed list contains node IDs of a group of coincident free
+ # borders such that each consequent triple of IDs within a group describes
+ # a free border in a usual way: n1, n2, nLast - i.e. 1st node, 2nd node and
+ # last node of a border.
+ # For example [[1, 2, 10, 20, 21, 40], [11, 12, 15, 55, 54, 41]] describes two
+ # groups of coincident free borders, each group including two borders.
+ # @param createPolygons if @c True faces adjacent to free borders are converted to
+ # polygons if a node of opposite border falls on a face edge, else such
+ # faces are split into several ones.
+ # @param createPolyhedra if @c True volumes adjacent to free borders are converted to
+ # polyhedra if a node of opposite border falls on a volume edge, else such
+ # volumes, if any, remain intact and the mesh becomes non-conformal.
+ # @return a number of successfully sewed groups
+ # @ingroup l2_modif_trsf
+ def SewCoincidentFreeBorders (self, freeBorders, createPolygons=False, createPolyhedra=False):
+ if freeBorders and isinstance( freeBorders, list ):
+ # construct SMESH.CoincidentFreeBorders
+ if isinstance( freeBorders[0], int ):
+ freeBorders = [freeBorders]
+ borders = []
+ coincidentGroups = []
+ for nodeList in freeBorders:
+ if not nodeList or len( nodeList ) % 3:
+ raise ValueError, "Wrong number of nodes in this group: %s" % nodeList
+ group = []
+ while nodeList:
+ group.append ( SMESH.FreeBorderPart( len(borders), 0, 1, 2 ))
+ borders.append( SMESH.FreeBorder( nodeList[:3] ))
+ nodeList = nodeList[3:]
+ pass
+ coincidentGroups.append( group )
+ pass
+ freeBorders = SMESH.CoincidentFreeBorders( borders, coincidentGroups )
+
+ return self.editor.SewCoincidentFreeBorders( freeBorders, createPolygons, createPolyhedra )
+
## Sews free borders
# @return SMESH::Sew_Error
# @ingroup l2_modif_trsf
def ClearLastCreated(self):
self.editor.ClearLastCreated()
- ## Creates Duplicates given elements, i.e. creates new elements based on the
+ ## Creates duplicates of given elements, i.e. creates new elements based on the
# same nodes as the given ones.
# @param theElements - container of elements to duplicate. It can be a Mesh,
- # sub-mesh, group, filter or a list of element IDs.
- # @param theGroupName - a name of group to contain the generated elements.
+ # sub-mesh, group, filter or a list of element IDs. If \a theElements is
+ # a Mesh, elements of highest dimension are duplicated
+ # @param theGroupName - a name of group to contain the generated elements.
# If a group with such a name already exists, the new elements
# are added to the existng group, else a new group is created.
# If \a theGroupName is empty, new elements are not added
self.functors[ funcType._v ] = fn
return fn
- def _valueFromFunctor(self, funcType, elemId):
+ ## Returns value of a functor for a given element
+ # @param funcType an item of SMESH.FunctorType enum
+ # Type "SMESH.FunctorType._items" in the Python Console to see all items.
+ # @param elemId element or node ID
+ # @param isElem @a elemId is ID of element or node
+ # @return the functor value or zero in case of invalid arguments
+ def FunctorValue(self, funcType, elemId, isElem=True):
fn = self._getFunctor( funcType )
- if fn.GetElementType() == self.GetElementType(elemId, True):
+ if fn.GetElementType() == self.GetElementType(elemId, isElem):
val = fn.GetValue(elemId)
else:
val = 0
if elemId == None:
length = self.smeshpyD.GetLength(self)
else:
- length = self._valueFromFunctor(SMESH.FT_Length, elemId)
+ length = self.FunctorValue(SMESH.FT_Length, elemId)
return length
## Get area of 2D element or sum of areas of all 2D mesh elements
if elemId == None:
area = self.smeshpyD.GetArea(self)
else:
- area = self._valueFromFunctor(SMESH.FT_Area, elemId)
+ area = self.FunctorValue(SMESH.FT_Area, elemId)
return area
## Get volume of 3D element or sum of volumes of all 3D mesh elements
if elemId == None:
volume = self.smeshpyD.GetVolume(self)
else:
- volume = self._valueFromFunctor(SMESH.FT_Volume3D, elemId)
+ volume = self.FunctorValue(SMESH.FT_Volume3D, elemId)
return volume
## Get maximum element length.
ftype = SMESH.FT_MaxElementLength3D
else:
ftype = SMESH.FT_MaxElementLength2D
- return self._valueFromFunctor(ftype, elemId)
+ return self.FunctorValue(ftype, elemId)
## Get aspect ratio of 2D or 3D element.
# @param elemId mesh element ID
ftype = SMESH.FT_AspectRatio3D
else:
ftype = SMESH.FT_AspectRatio
- return self._valueFromFunctor(ftype, elemId)
+ return self.FunctorValue(ftype, elemId)
## Get warping angle of 2D element.
# @param elemId mesh element ID
# @return element's warping angle value
# @ingroup l1_measurements
def GetWarping(self, elemId):
- return self._valueFromFunctor(SMESH.FT_Warping, elemId)
+ return self.FunctorValue(SMESH.FT_Warping, elemId)
## Get minimum angle of 2D element.
# @param elemId mesh element ID
# @return element's minimum angle value
# @ingroup l1_measurements
def GetMinimumAngle(self, elemId):
- return self._valueFromFunctor(SMESH.FT_MinimumAngle, elemId)
+ return self.FunctorValue(SMESH.FT_MinimumAngle, elemId)
## Get taper of 2D element.
# @param elemId mesh element ID
# @return element's taper value
# @ingroup l1_measurements
def GetTaper(self, elemId):
- return self._valueFromFunctor(SMESH.FT_Taper, elemId)
+ return self.FunctorValue(SMESH.FT_Taper, elemId)
## Get skew of 2D element.
# @param elemId mesh element ID
# @return element's skew value
# @ingroup l1_measurements
def GetSkew(self, elemId):
- return self._valueFromFunctor(SMESH.FT_Skew, elemId)
+ return self.FunctorValue(SMESH.FT_Skew, elemId)
## Return minimal and maximal value of a given functor.
# @param funType a functor type, an item of SMESH.FunctorType enum
fun = self._getFunctor( funType )
if fun:
if meshPart:
+ if hasattr( meshPart, "SetMesh" ):
+ meshPart.SetMesh( self.mesh ) # set mesh to filter
hist = fun.GetLocalHistogram( 1, False, meshPart )
else:
hist = fun.GetHistogram( 1, False )
pass # end of Mesh class
+
+## Class used to compensate change of CORBA API of SMESH_Mesh for backward compatibility
+# with old dump scripts which call SMESH_Mesh directly and not via smeshBuilder.Mesh
+#
+class meshProxy(SMESH._objref_SMESH_Mesh):
+ def __init__(self):
+ SMESH._objref_SMESH_Mesh.__init__(self)
+ def __deepcopy__(self, memo=None):
+ new = self.__class__()
+ return new
+ def CreateDimGroup(self,*args): # 2 args added: nbCommonNodes, underlyingOnly
+ if len( args ) == 3:
+ args += SMESH.ALL_NODES, True
+ return SMESH._objref_SMESH_Mesh.CreateDimGroup( self, *args )
+ pass
+omniORB.registerObjref(SMESH._objref_SMESH_Mesh._NP_RepositoryId, meshProxy)
+
+
+## Class wrapping SMESH_SubMesh in order to add Compute()
+#
+class submeshProxy(SMESH._objref_SMESH_subMesh):
+ def __init__(self):
+ SMESH._objref_SMESH_subMesh.__init__(self)
+ self.mesh = None
+ def __deepcopy__(self, memo=None):
+ new = self.__class__()
+ return new
+
+ ## Computes the sub-mesh and returns the status of the computation
+ # @param refresh if @c True, Object browser is automatically updated (when running in GUI)
+ # @return True or False
+ # @ingroup l2_construct
+ def Compute(self,refresh=False):
+ if not self.mesh:
+ self.mesh = Mesh( smeshBuilder(), None, self.GetMesh())
+
+ ok = self.mesh.Compute( self.GetSubShape(),refresh=[] )
+
+ if salome.sg.hasDesktop() and self.mesh.GetStudyId() >= 0:
+ smeshgui = salome.ImportComponentGUI("SMESH")
+ smeshgui.Init(self.mesh.GetStudyId())
+ smeshgui.SetMeshIcon( salome.ObjectToID( self ), ok, (self.GetNumberOfElements()==0) )
+ if refresh: salome.sg.updateObjBrowser(1)
+ pass
+
+ return ok
+ pass
+omniORB.registerObjref(SMESH._objref_SMESH_subMesh._NP_RepositoryId, submeshProxy)
+
+
+## Class used to compensate change of CORBA API of SMESH_MeshEditor for backward compatibility
+# with old dump scripts which call SMESH_MeshEditor directly and not via smeshBuilder.Mesh
+#
+class meshEditor(SMESH._objref_SMESH_MeshEditor):
+ def __init__(self):
+ SMESH._objref_SMESH_MeshEditor.__init__(self)
+ self.mesh = None
+ def __getattr__(self, name ): # method called if an attribute not found
+ if not self.mesh: # look for name() method in Mesh class
+ self.mesh = Mesh( None, None, SMESH._objref_SMESH_MeshEditor.GetMesh(self))
+ if hasattr( self.mesh, name ):
+ return getattr( self.mesh, name )
+ if name == "ExtrusionAlongPathObjX":
+ return getattr( self.mesh, "ExtrusionAlongPathX" ) # other method name
+ print "meshEditor: attribute '%s' NOT FOUND" % name
+ return None
+ def __deepcopy__(self, memo=None):
+ new = self.__class__()
+ return new
+ def FindCoincidentNodes(self,*args): # a 2nd arg added (SeparateCornerAndMediumNodes)
+ if len( args ) == 1: args += False,
+ return SMESH._objref_SMESH_MeshEditor.FindCoincidentNodes( self, *args )
+ def FindCoincidentNodesOnPart(self,*args): # a 3d arg added (SeparateCornerAndMediumNodes)
+ if len( args ) == 2: args += False,
+ return SMESH._objref_SMESH_MeshEditor.FindCoincidentNodesOnPart( self, *args )
+ def MergeNodes(self,*args): # a 2nd arg added (NodesToKeep)
+ if len( args ) == 1:
+ return SMESH._objref_SMESH_MeshEditor.MergeNodes( self, args[0], [] )
+ NodesToKeep = args[1]
+ unRegister = genObjUnRegister()
+ if NodesToKeep:
+ if isinstance( NodesToKeep, list ) and isinstance( NodesToKeep[0], int ):
+ NodesToKeep = self.MakeIDSource( NodesToKeep, SMESH.NODE )
+ if not isinstance( NodesToKeep, list ):
+ NodesToKeep = [ NodesToKeep ]
+ return SMESH._objref_SMESH_MeshEditor.MergeNodes( self, args[0], NodesToKeep )
+ pass
+omniORB.registerObjref(SMESH._objref_SMESH_MeshEditor._NP_RepositoryId, meshEditor)
+
## Helper class for wrapping of SMESH.SMESH_Pattern CORBA class
#
class Pattern(SMESH._objref_SMESH_Pattern):
+ def LoadFromFile(self, patternTextOrFile ):
+ text = patternTextOrFile
+ if os.path.exists( text ):
+ text = open( patternTextOrFile ).read()
+ pass
+ return SMESH._objref_SMESH_Pattern.LoadFromFile( self, text )
+
def ApplyToMeshFaces(self, theMesh, theFacesIDs, theNodeIndexOnKeyPoint1, theReverse):
decrFun = lambda i: i-1
theNodeIndexOnKeyPoint1,Parameters,hasVars = ParseParameters(theNodeIndexOnKeyPoint1, decrFun)
theMesh.SetParameters(Parameters)
return SMESH._objref_SMESH_Pattern.ApplyToHexahedrons( self, theMesh, theVolumesIDs, theNode000Index, theNode001Index )
+ def MakeMesh(self, mesh, CreatePolygons=False, CreatePolyhedra=False):
+ if isinstance( mesh, Mesh ):
+ mesh = mesh.GetMesh()
+ return SMESH._objref_SMESH_Pattern.MakeMesh( self, mesh, CreatePolygons, CreatePolyhedra )
+
# Registering the new proxy for Pattern
omniORB.registerObjref(SMESH._objref_SMESH_Pattern._NP_RepositoryId, Pattern)
raise RuntimeError, "No class found for algo type %s" % algoType
return None
-# Private class used to substitute and store variable parameters of hypotheses.
+## Private class used to substitute and store variable parameters of hypotheses.
#
class hypMethodWrapper:
def __init__(self, hyp, method):
return result
pass
-# A helper class that call UnRegister() of SALOME.GenericObj'es stored in it
+## A helper class that call UnRegister() of SALOME.GenericObj'es stored in it
+#
class genObjUnRegister:
def __init__(self, genObj=None):
if genObj and hasattr( genObj, "UnRegister" ):
genObj.UnRegister()
+
+## Bind methods creating mesher plug-ins to the Mesh class
+#
for pluginName in os.environ[ "SMESH_MeshersList" ].split( ":" ):
#
#print "pluginName: ", pluginName