#include "PartSet_WidgetSketchLabel.h"
#include "PartSet_Tools.h"
+#include "SketchPlugin_SketchEntity.h"
+
#include <XGUI_Workshop.h>
#include <XGUI_Displayer.h>
#include <XGUI_SelectionMgr.h>
#include <XGUI_Selection.h>
#include <XGUI_ViewerProxy.h>
#include <XGUI_ActionsMgr.h>
+#include <XGUI_ModuleConnector.h>
#include <ModuleBase_Operation.h>
#include <ModuleBase_ViewerPrs.h>
+#include <ModuleBase_Tools.h>
+#include <ModuleBase_IModule.h>
+
+#include <ModelAPI_ResultBody.h>
+#include <ModelAPI_Tools.h>
#include <GeomAlgoAPI_FaceBuilder.h>
+#include <GeomAlgoAPI_ShapeTools.h>
#include <GeomDataAPI_Point.h>
#include <GeomDataAPI_Dir.h>
#include <GeomAPI_XYZ.h>
#include <SketchPlugin_Sketch.h>
+#include <SketcherPrs_Tools.h>
#include <Precision.hxx>
#include <gp_Pln.hxx>
#include <Config_PropManager.h>
#include <QLabel>
-#include <QTimer>
#include <QApplication>
+#include <QVBoxLayout>
+#include <QCheckBox>
PartSet_WidgetSketchLabel::PartSet_WidgetSketchLabel(QWidget* theParent,
+ ModuleBase_IWorkshop* theWorkshop,
const Config_WidgetAPI* theData,
- const std::string& theParentId)
- : ModuleBase_ModelWidget(theParent, theData, theParentId), myPreviewDisplayed(false)
+ const std::string& theParentId,
+ bool toShowConstraints)
+: ModuleBase_WidgetValidated(theParent, theWorkshop, theData, theParentId),
+ myPreviewDisplayed(false)
{
myText = QString::fromStdString(theData->getProperty("title"));
myLabel = new QLabel("", theParent);
myLabel->setToolTip("");
myLabel->setIndent(5);
- mySelectionTimer = new QTimer(this);
- connect(mySelectionTimer, SIGNAL(timeout()), SLOT(setSketchingMode()));
- mySelectionTimer->setSingleShot(true);
+ QVBoxLayout* aLayout = new QVBoxLayout(this);
+ ModuleBase_Tools::zeroMargins(aLayout);
+ aLayout->addWidget(myLabel);
+
+ myShowConstraints = new QCheckBox(tr("Show constraints"), this);
+ aLayout->addWidget(myShowConstraints);
+
+ setLayout(aLayout);
+ connect(myShowConstraints, SIGNAL(toggled(bool)), this, SIGNAL(showConstraintToggled(bool)));
+ myShowConstraints->setChecked(toShowConstraints);
}
PartSet_WidgetSketchLabel::~PartSet_WidgetSketchLabel()
{
- erasePreviewPlanes();
+}
+
+bool PartSet_WidgetSketchLabel::setSelection(QList<ModuleBase_ViewerPrs>& theValues,
+ const bool theToValidate)
+{
+ // do not use the given selection if the plane of the sketch has been already set.
+ // If this check is absent, a selected plane in the viewer can be set in the sketch
+ // even if the sketch is built on another plane.
+ if (plane().get())
+ return true;
+
+ ModuleBase_ViewerPrs aPrs = theValues.first();
+ bool aDone = ModuleBase_WidgetValidated::setSelection(theValues, theToValidate);
+ if (aDone)
+ updateByPlaneSelected(aPrs);
+
+ return aDone;
}
QList<QWidget*> PartSet_WidgetSketchLabel::getControls() const
{
- return QList<QWidget*>();
+ QList<QWidget*> aResult;
+ aResult << myLabel;
+ return aResult;
}
-QWidget* PartSet_WidgetSketchLabel::getControl() const
+void PartSet_WidgetSketchLabel::onSelectionChanged()
{
- return myLabel;
+ QList<ModuleBase_ViewerPrs> aSelected = getFilteredSelected();
+
+ if (aSelected.empty())
+ return;
+ ModuleBase_ViewerPrs aPrs = aSelected.first();
+
+ bool aDone = ModuleBase_WidgetValidated::setSelection(aSelected, false);
+ if (aDone) {
+ updateByPlaneSelected(aPrs);
+ updateObject(myFeature);
+ }
}
-void PartSet_WidgetSketchLabel::onPlaneSelected()
+void PartSet_WidgetSketchLabel::updateByPlaneSelected(const ModuleBase_ViewerPrs& thePrs)
{
- XGUI_Selection* aSelection = myWorkshop->selector()->selection();
- QList<ModuleBase_ViewerPrs> aSelected = aSelection->getSelected();
- if (!aSelected.empty()) {
- ModuleBase_ViewerPrs aPrs = aSelected.first();
- TopoDS_Shape aShape = aPrs.shape();
- if (!aShape.IsNull()) {
- std::shared_ptr<GeomAPI_Dir> aDir = setSketchPlane(aShape);
- if (aDir) {
- erasePreviewPlanes();
-
- if (aPrs.object() && (feature() != aPrs.object())) {
- DataPtr aData = feature()->data();
- AttributeSelectionPtr aSelAttr =
- std::dynamic_pointer_cast<ModelAPI_AttributeSelection>
- (aData->attribute(SketchPlugin_Feature::EXTERNAL_ID()));
- if (aSelAttr) {
- ResultPtr aRes = std::dynamic_pointer_cast<ModelAPI_Result>(aPrs.object());
- if (aRes) {
- GeomShapePtr aShapePtr(new GeomAPI_Shape());
- aShapePtr->setImpl(new TopoDS_Shape(aShape));
- aSelAttr->setValue(aRes, aShapePtr);
- }
- }
- } else
- myWorkshop->viewer()->setViewProjection(aDir->x(), aDir->y(), aDir->z());
-
- // Clear text in the label
- myLabel->setText("");
- myLabel->setToolTip("");
- disconnect(myWorkshop->selector(), SIGNAL(selectionChanged()),
- this, SLOT(onPlaneSelected()));
-
- // Clear selection mode and define sketching mode
- XGUI_Displayer* aDisp = myWorkshop->displayer();
- aDisp->removeSelectionFilter(myFaceFilter);
- //aDisp->closeLocalContexts();
- emit planeSelected(plane());
- setSketchingMode();
-
- // Update sketcher actions
- XGUI_ActionsMgr* anActMgr = myWorkshop->actionsMgr();
- anActMgr->update();
- myWorkshop->viewer()->update();
- }
+ // 1. hide main planes if they have been displayed
+ erasePreviewPlanes();
+ // 2. if the planes were displayed, change the view projection
+ TopoDS_Shape aShape = thePrs.shape();
+ std::shared_ptr<GeomAPI_Shape> aGShape;
+ std::shared_ptr<GeomAPI_Shape> aBaseShape;
+
+ DataPtr aData = feature()->data();
+ AttributeSelectionPtr aSelAttr = std::dynamic_pointer_cast<ModelAPI_AttributeSelection>
+ (aData->attribute(SketchPlugin_SketchEntity::EXTERNAL_ID()));
+
+ // selection happens in OCC viewer
+ if (!aShape.IsNull()) {
+ aGShape = std::shared_ptr<GeomAPI_Shape>(new GeomAPI_Shape());
+ aGShape->setImpl(new TopoDS_Shape(aShape));
+
+ if (aSelAttr && aSelAttr->context()) {
+ aBaseShape = aSelAttr->context()->shape();
+ }
+ }
+ else { // selection happens in OCC viewer(on body) of in the OB browser
+ if (aSelAttr) {
+ aGShape = aSelAttr->value();
}
}
+ if (aGShape.get() != NULL) {
+ // get plane parameters
+ std::shared_ptr<GeomAPI_Pln> aPlane = GeomAlgoAPI_FaceBuilder::plane(aGShape);
+ std::shared_ptr<GeomAPI_Dir> aDir = aPlane->direction();
+ gp_XYZ aXYZ = aDir->impl<gp_Dir>().XYZ();
+ double aTwist = 0.0;
+
+ // orienting projection is not needed: it is done in GeomAlgoAPI_FaceBuilder::plane
+ /*if (aGShape->impl<TopoDS_Shape>().Orientation() == TopAbs_REVERSED) {
+ aXYZ.Reverse();
+ }*/
+
+ myWorkshop->viewer()->setViewProjection(aXYZ.X(), aXYZ.Y(), aXYZ.Z(), aTwist);
+ }
+ // 3. Clear text in the label
+ myLabel->setText("");
+ myLabel->setToolTip("");
+ disconnect(workshop()->selector(), SIGNAL(selectionChanged()),
+ this, SLOT(onSelectionChanged()));
+ // 4. deactivate face selection filter
+ activateFilters(false);
+
+ // 5. Clear selection mode and define sketching mode
+ //XGUI_Displayer* aDisp = workshop()->displayer();
+ //aDisp->closeLocalContexts();
+ emit planeSelected(plane());
+ // after the plane is selected in the sketch, the sketch selection should be activated
+ // it can not be performed in the sketch label widget because, we don't need to switch off
+ // the selection by any label deactivation, but need to switch it off by stop the sketch
+ activateSelection(true);
+
+ // 6. Update sketcher actions
+ XGUI_ActionsMgr* anActMgr = workshop()->actionsMgr();
+ anActMgr->update();
+ myWorkshop->viewer()->update();
}
std::shared_ptr<GeomAPI_Pln> PartSet_WidgetSketchLabel::plane() const
{
CompositeFeaturePtr aSketch = std::dynamic_pointer_cast<ModelAPI_CompositeFeature>(myFeature);
return PartSet_Tools::sketchPlane(aSketch);
+}
+
+bool PartSet_WidgetSketchLabel::focusTo()
+{
+ myLabel->setFocus();
+ return true;
+}
+void PartSet_WidgetSketchLabel::enableFocusProcessing()
+{
+ myLabel->installEventFilter(this);
+}
+
+void PartSet_WidgetSketchLabel::storeAttributeValue()
+{
+ ModuleBase_WidgetValidated::storeAttributeValue();
+}
+
+void PartSet_WidgetSketchLabel::restoreAttributeValue(const bool theValid)
+{
+ ModuleBase_WidgetValidated::restoreAttributeValue(theValid);
+
+ // it is not necessary to save the previous plane value because the plane is chosen once
+ DataPtr aData = feature()->data();
+ AttributeSelectionPtr aSelAttr = std::dynamic_pointer_cast<ModelAPI_AttributeSelection>
+ (aData->attribute(SketchPlugin_SketchEntity::EXTERNAL_ID()));
+ if (aSelAttr) {
+ ResultPtr anEmptyResult;
+ GeomShapePtr anEmptyShape;
+ aSelAttr->setValue(anEmptyResult, anEmptyShape);
+ }
+}
+
+bool PartSet_WidgetSketchLabel::setSelectionCustom(const ModuleBase_ViewerPrs& thePrs)
+{
+ bool isOwnerSet = false;
+
+ const TopoDS_Shape& aShape = thePrs.shape();
+ std::shared_ptr<GeomAPI_Dir> aDir;
+
+ if (thePrs.object() && (feature() != thePrs.object())) {
+ DataPtr aData = feature()->data();
+ AttributeSelectionPtr aSelAttr =
+ std::dynamic_pointer_cast<ModelAPI_AttributeSelection>
+ (aData->attribute(SketchPlugin_SketchEntity::EXTERNAL_ID()));
+ if (aSelAttr) {
+ ResultPtr aRes = std::dynamic_pointer_cast<ModelAPI_Result>(thePrs.object());
+ if (aRes) {
+ GeomShapePtr aShapePtr(new GeomAPI_Shape());
+ if (aShape.IsNull()) { // selection happens in the OCC viewer
+ aShapePtr = ModelAPI_Tools::shape(aRes);
+ }
+ else { // selection happens in OB browser
+ aShapePtr->setImpl(new TopoDS_Shape(aShape));
+ }
+ if (aShapePtr.get() != NULL) {
+ aSelAttr->setValue(aRes, aShapePtr);
+ isOwnerSet = true;
+ }
+ }
+ }
+ }
+ else if (!aShape.IsNull()) {
+ aDir = setSketchPlane(aShape);
+ isOwnerSet = aDir.get();
+ }
+ return isOwnerSet;
}
void PartSet_WidgetSketchLabel::activateCustom()
{
std::shared_ptr<GeomAPI_Pln> aPlane = plane();
- if (aPlane) {
- //setSketchingMode();
- // In order to avoid Opening/Closing of context too often
- mySelectionTimer->start(20);
- } else {
+ if (aPlane.get()) {
+ activateSelection(true);
+ return;
+ }
+
+ bool aBodyIsVisualized = false;
+ XGUI_Displayer* aDisp = workshop()->displayer();
+ QObjectPtrList aDisplayed = aDisp->displayedObjects();
+ foreach (ObjectPtr anObj, aDisplayed) {
+ ResultPtr aResult = std::dynamic_pointer_cast<ModelAPI_Result>(anObj);
+ if (aResult.get() != NULL) {
+ aBodyIsVisualized = aResult->groupName() == ModelAPI_ResultBody::group();
+ if (aBodyIsVisualized)
+ break;
+ }
+ }
+
+ if (!aBodyIsVisualized) {
// We have to select a plane before any operation
showPreviewPlanes();
+ }
+ activateSelection(true);
- XGUI_Displayer* aDisp = myWorkshop->displayer();
- //aDisp->openLocalContext();
- //aDisp->activateObjects(QIntList());
- if (myFaceFilter.IsNull())
- myFaceFilter = new StdSelect_FaceFilter(StdSelect_Plane);
- aDisp->addSelectionFilter(myFaceFilter);
- QIntList aModes;
- aModes << TopAbs_FACE;
- aDisp->activateObjects(aModes);
+ myLabel->setText(myText);
+ myLabel->setToolTip(myTooltip);
- myLabel->setText(myText);
- myLabel->setToolTip(myTooltip);
+ connect(workshop()->selector(), SIGNAL(selectionChanged()), this, SLOT(onSelectionChanged()));
+ activateFilters(true);
- connect(myWorkshop->selector(), SIGNAL(selectionChanged()), this, SLOT(onPlaneSelected()));
- aDisp->updateViewer();
- }
+ aDisp->updateViewer();
}
void PartSet_WidgetSketchLabel::deactivate()
{
- // Do not set selection mode if the widget was activated for a small moment
- mySelectionTimer->stop();
- XGUI_Displayer* aDisp = myWorkshop->displayer();
- aDisp->removeSelectionFilter(myFaceFilter);
- //aDisp->removeSelectionFilter(mySketchFilter);
- //aDisp->closeLocalContexts();
erasePreviewPlanes();
+ activateSelection(false);
+
+ activateFilters(false);
+}
+
+void PartSet_WidgetSketchLabel::activateSelection(bool toActivate)
+{
+ if (toActivate) {
+ QIntList aModes;
+ std::shared_ptr<GeomAPI_Pln> aPlane = plane();
+ if (aPlane.get()) {
+ myWorkshop->module()->activeSelectionModes(aModes);
+ }
+ else {
+ aModes << TopAbs_FACE;
+ }
+ myWorkshop->activateSubShapesSelection(aModes);
+ } else {
+ myWorkshop->deactivateSubShapesSelection();
+ }
}
void PartSet_WidgetSketchLabel::erasePreviewPlanes()
{
if (myPreviewDisplayed) {
- XGUI_Displayer* aDisp = myWorkshop->displayer();
+ XGUI_Displayer* aDisp = workshop()->displayer();
aDisp->eraseAIS(myYZPlane, false);
aDisp->eraseAIS(myXZPlane, false);
aDisp->eraseAIS(myXYPlane, false);
// Create Preview
std::shared_ptr<GeomAPI_Pnt> anOrigin(new GeomAPI_Pnt(0, 0, 0));
std::shared_ptr<GeomAPI_Dir> aYZDir(new GeomAPI_Dir(1, 0, 0));
- std::shared_ptr<GeomAPI_Dir> aXZDir(new GeomAPI_Dir(0, 1, 0));
+ // -1, not 1 for correct internal sketch coords (issue 898)
+ std::shared_ptr<GeomAPI_Dir> aXZDir(new GeomAPI_Dir(0, -1, 0));
std::shared_ptr<GeomAPI_Dir> aXYDir(new GeomAPI_Dir(0, 0, 1));
- int aR[] = {255, 0, 0};
- int aG[] = {0, 255, 0};
- int aB[] = {0, 0, 255};
+ std::vector<int> aYZRGB, aXZRGB, aXYRGB;
+ aYZRGB = Config_PropManager::color("Visualization", "yz_plane_color",
+ YZ_PLANE_COLOR);
+ aXZRGB = Config_PropManager::color("Visualization", "xz_plane_color",
+ XZ_PLANE_COLOR);
+ aXYRGB = Config_PropManager::color("Visualization", "xy_plane_color",
+ XY_PLANE_COLOR);
+ int aR[] = {aYZRGB[0], aYZRGB[1], aYZRGB[2]};
+ int aG[] = {aXZRGB[0], aXZRGB[1], aXZRGB[2]};
+ int aB[] = {aXYRGB[0], aXYRGB[1], aXYRGB[2]};
myYZPlane = createPreviewPlane(anOrigin, aYZDir, aR);
myXZPlane = createPreviewPlane(anOrigin, aXZDir, aG);
myXYPlane = createPreviewPlane(anOrigin, aXYDir, aB);
}
- XGUI_Displayer* aDisp = myWorkshop->displayer();
- aDisp->displayAIS(myYZPlane, false);
- aDisp->displayAIS(myXZPlane, false);
- aDisp->displayAIS(myXYPlane, false);
+ XGUI_Displayer* aDisp = workshop()->displayer();
+ aDisp->displayAIS(myYZPlane, true, false);
+ aDisp->displayAIS(myXZPlane, true, false);
+ aDisp->displayAIS(myXYPlane, true, false);
myPreviewDisplayed = true;
}
std::shared_ptr<GeomAPI_Shape> aGShape(new GeomAPI_Shape);
aGShape->setImpl(new TopoDS_Shape(theShape));
+
+
// get plane parameters
std::shared_ptr<GeomAPI_Pln> aPlane = GeomAlgoAPI_FaceBuilder::plane(aGShape);
std::shared_ptr<GeomDataAPI_Dir> aDirX = std::dynamic_pointer_cast<GeomDataAPI_Dir>(
aData->attribute(SketchPlugin_Sketch::DIRX_ID()));
aDirX->setValue(aXDir);
- std::shared_ptr<GeomDataAPI_Dir> aDirY = std::dynamic_pointer_cast<GeomDataAPI_Dir>(
- aData->attribute(SketchPlugin_Sketch::DIRY_ID()));
- aDirY->setValue(aYDir);
std::shared_ptr<GeomAPI_Dir> aDir = aPlane->direction();
return aDir;
}
+void PartSet_WidgetSketchLabel::showConstraints(bool theOn)
+{
+ myShowConstraints->setChecked(theOn);
+ emit showConstraintToggled(theOn);
+}
-void PartSet_WidgetSketchLabel::setSketchingMode()
+XGUI_Workshop* PartSet_WidgetSketchLabel::workshop() const
{
- XGUI_Displayer* aDisp = myWorkshop->displayer();
- // Clear standard selection modes if they are defined
- //aDisp->activateObjects(aModes);
- //aDisp->openLocalContext();
-
- // Get default selection modes
- QIntList aModes;
- aModes.append(AIS_DSM_Text);
- aModes.append(AIS_DSM_Line);
- aModes.append(AIS_Shape::SelectionMode((TopAbs_ShapeEnum) TopAbs_VERTEX));
- aModes.append(AIS_Shape::SelectionMode((TopAbs_ShapeEnum) TopAbs_EDGE));
-
- aDisp->activateObjects(aModes);
+ XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(myWorkshop);
+ return aConnector->workshop();
}