#include "PartSet_SketcherMgr.h"
#include "PartSet_Module.h"
-#include "PartSet_WidgetPoint2D.h"
+#include "PartSet_WidgetPoint2d.h"
+#include "PartSet_WidgetPoint2dDistance.h"
#include "PartSet_Tools.h"
+#include <ModuleBase_WidgetEditor.h>
+
#include <XGUI_ModuleConnector.h>
#include <XGUI_Displayer.h>
#include <XGUI_Workshop.h>
+#include <XGUI_ContextMenuMgr.h>
#include <XGUI_Selection.h>
#include <XGUI_SelectionMgr.h>
+#include <ModuleBase_ModelWidget.h>
+#include <XGUI_ModuleConnector.h>
+#include <XGUI_PropertyPanel.h>
+#include <XGUI_ViewerProxy.h>
+
+#include <AppElements_MainWindow.h>
#include <ModuleBase_IViewer.h>
#include <ModuleBase_IWorkshop.h>
#include <SketchPlugin_ConstraintPerpendicular.h>
#include <SketchPlugin_ConstraintRadius.h>
#include <SketchPlugin_ConstraintRigid.h>
+#include <SketchPlugin_ConstraintHorizontal.h>
+#include <SketchPlugin_ConstraintVertical.h>
+#include <SketchPlugin_ConstraintEqual.h>
+#include <SketchPlugin_ConstraintTangent.h>
#include <SelectMgr_IndexedMapOfOwner.hxx>
#include <StdSelect_BRepOwner.hxx>
+//#include <AIS_DimensionSelectionMode.hxx>
+//#include <AIS_Shape.hxx>
+
#include <ModelAPI_Events.h>
+#include <ModelAPI_Session.h>
#include <QMouseEvent>
#include <QApplication>
PartSet_SketcherMgr::PartSet_SketcherMgr(PartSet_Module* theModule)
- : QObject(theModule), myModule(theModule), myIsDragging(false), myDragDone(false)
+ : QObject(theModule), myModule(theModule), myIsDragging(false), myDragDone(false),
+ myIsPropertyPanelValueChanged(false), myIsMouseOverWindow(false),
+ myIsMouseOverViewProcessed(true), myPreviousUpdateViewerEnabled(true),
+ myIsPopupMenuActive(false)
{
- ModuleBase_IWorkshop* aWorkshop = myModule->workshop();
- ModuleBase_IViewer* aViewer = aWorkshop->viewer();
+ ModuleBase_IWorkshop* anIWorkshop = myModule->workshop();
+ ModuleBase_IViewer* aViewer = anIWorkshop->viewer();
myPreviousSelectionEnabled = true;//aViewer->isSelectionEnabled();
connect(aViewer, SIGNAL(mouseDoubleClick(ModuleBase_IViewWindow*, QMouseEvent*)),
this, SLOT(onMouseDoubleClick(ModuleBase_IViewWindow*, QMouseEvent*)));
+
+ XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(anIWorkshop);
+ XGUI_Workshop* aWorkshop = aConnector->workshop();
+ connect(aWorkshop, SIGNAL(applicationStarted()), this, SLOT(onApplicationStarted()));
}
PartSet_SketcherMgr::~PartSet_SketcherMgr()
myPlaneFilter.Nullify();
}
+void PartSet_SketcherMgr::onEnterViewPort()
+{
+ if (!isNestedCreateOperation(getCurrentOperation()))
+ return;
+ // 1. if the mouse over window, update the next flag. Do not perform update visibility of
+ // created feature because it should be done in onMouseMove(). Some widgets watch
+ // the mouse move and use the cursor position to update own values. If the presentaion is
+ // redisplayed before this update, the feature presentation jumps from reset value to current.
+ myIsMouseOverWindow = true;
+ myIsPropertyPanelValueChanged = false;
+}
+
+void PartSet_SketcherMgr::onLeaveViewPort()
+{
+ if (!isNestedCreateOperation(getCurrentOperation()))
+ return;
+ // the method should be performed if the popup menu is called,
+ // the reset of the current widget should not happen
+ if (myIsPopupMenuActive)
+ return;
+
+ myIsMouseOverViewProcessed = false;
+ myIsMouseOverWindow = false;
+
+ // 2. if the mouse IS NOT over window, reset the active widget value and hide the presentation
+ ModuleBase_IWorkshop* aWorkshop = myModule->workshop();
+ XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(aWorkshop);
+ XGUI_Displayer* aDisplayer = aConnector->workshop()->displayer();
+ // disable the viewer update in order to avoid visualization of redisplayed feature in viewer
+ // obtained after reset value
+ bool isEnableUpdateViewer = aDisplayer->enableUpdateViewer(false);
+ ModuleBase_Operation* aOperation = getCurrentOperation();
+ ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
+ ModuleBase_ModelWidget* aActiveWgt = aPanel->activeWidget();
+ if (aActiveWgt) {
+ aActiveWgt->reset();
+ }
+ aDisplayer->enableUpdateViewer(isEnableUpdateViewer);
+
+ // hides the presentation of the current operation feature
+ myIsPropertyPanelValueChanged = false;
+ // the feature is to be erased here, but it is correct to call canDisplayObject because
+ // there can be additional check (e.g. editor widget in distance constraint)
+ visualizeFeature(aOperation, canDisplayObject());
+}
+
+void PartSet_SketcherMgr::onBeforeValuesChangedInPropertyPanel()
+{
+ if (isNestedCreateOperation(getCurrentOperation()))
+ return;
+ // it is necessary to save current selection in order to restore it after the values are modifed
+ storeSelection();
+
+ ModuleBase_IWorkshop* aWorkshop = myModule->workshop();
+ XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(aWorkshop);
+ XGUI_Displayer* aDisplayer = aConnector->workshop()->displayer();
+ myPreviousUpdateViewerEnabled = aDisplayer->enableUpdateViewer(false);
+}
+
+void PartSet_SketcherMgr::onAfterValuesChangedInPropertyPanel()
+{
+ if (isNestedCreateOperation(getCurrentOperation()))
+ return;
+ // it is necessary to restore current selection in order to restore it after the values are modified
+ restoreSelection();
+ myCurrentSelection.clear();
+
+ // 3. the flag to disable the update viewer should be set in order to avoid blinking in the
+ // viewer happens by deselect/select the modified objects. The flag should be restored after
+ // the selection processing. The update viewer should be also called.
+ ModuleBase_IWorkshop* aWorkshop = myModule->workshop();
+ XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(aWorkshop);
+ XGUI_Displayer* aDisplayer = aConnector->workshop()->displayer();
+ aDisplayer->enableUpdateViewer(myPreviousUpdateViewerEnabled);
+ aDisplayer->updateViewer();
+}
+
+void PartSet_SketcherMgr::onValuesChangedInPropertyPanel()
+{
+ if (!isNestedCreateOperation(getCurrentOperation()))
+ return;
+
+ // visualize the current operation feature
+ myIsPropertyPanelValueChanged = true;
+ ModuleBase_Operation* aOperation = getCurrentOperation();
+ // the feature is to be erased here, but it is correct to call canDisplayObject because
+ // there can be additional check (e.g. editor widget in distance constraint)
+ visualizeFeature(aOperation, canDisplayObject());
+}
+
void PartSet_SketcherMgr::onMousePressed(ModuleBase_IViewWindow* theWnd, QMouseEvent* theEvent)
{
- //
+ get2dPoint(theWnd, theEvent, myClickedPoint);
+
if (!(theEvent->buttons() & Qt::LeftButton))
return;
+ // Clear dragging mode
+ myIsDragging = false;
+
ModuleBase_IWorkshop* aWorkshop = myModule->workshop();
- ModuleBase_Operation* aOperation = aWorkshop->currentOperation();
+ ModuleBase_IViewer* aViewer = aWorkshop->viewer();
+ if (!aViewer->canDragByMouse())
+ return;
+
+ ModuleBase_Operation* aOperation = getCurrentOperation();
+ if (aOperation && aOperation->isEditOperation()) {
+ ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
+ ModuleBase_ModelWidget* aActiveWgt = aPanel->activeWidget();
+ // If the current widget is a selector, do do nothing, it processes the mouse press
+ if(aActiveWgt && aActiveWgt->isViewerSelector()) {
+ return;
+ }
+ }
+
// Use only for sketch operations
if (aOperation && myCurrentSketch) {
if (!PartSet_Tools::sketchPlane(myCurrentSketch))
return;
- bool isSketcher = (aOperation->id().toStdString() == SketchPlugin_Sketch::ID());
- bool isSketchOpe = sketchOperationIdList().contains(aOperation->id());
+ bool isSketcher = isSketchOperation(aOperation);
+ bool isSketchOpe = isNestedSketchOperation(aOperation);
// Avoid non-sketch operations
if ((!isSketchOpe) && (!isSketcher))
return;
// MoveTo in order to highlight current object
- ModuleBase_IViewer* aViewer = aWorkshop->viewer();
aViewer->AISContext()->MoveTo(theEvent->x(), theEvent->y(), theWnd->v3dView());
// Remember highlighted objects for editing
ModuleBase_ISelection* aSelect = aWorkshop->selection();
- QList<ModuleBase_ViewerPrs> aHighlighted = aSelect->getHighlighted();
- QList<ModuleBase_ViewerPrs> aSelected = aSelect->getSelected();
- myFeature2AttributeMap.clear();
bool aHasShift = (theEvent->modifiers() & Qt::ShiftModifier);
- if (aHasShift) {
- fillFeature2Attribute(aHighlighted, myFeature2AttributeMap, myCurrentSketch);
- fillFeature2Attribute(aSelected, myFeature2AttributeMap, myCurrentSketch);
- }
- else {
- fillFeature2Attribute(aHighlighted, myFeature2AttributeMap, myCurrentSketch);
- }
+ storeSelection(!aHasShift);
- if (myFeature2AttributeMap.empty()) {
+ if (myCurrentSelection.empty()) {
if (isSketchOpe && (!isSketcher))
// commit previous operation
if (!aOperation->commit())
if (isSketcher) {
myIsDragging = true;
-
- get2dPoint(theWnd, theEvent, myCurX, myCurY);
+ get2dPoint(theWnd, theEvent, myCurrentPoint);
myDragDone = false;
launchEditing();
aOperation->commit();
myIsDragging = true;
- get2dPoint(theWnd, theEvent, myCurX, myCurY);
+ get2dPoint(theWnd, theEvent, myCurrentPoint);
myDragDone = false;
// This is necessary in order to finalize previous operation
void PartSet_SketcherMgr::onMouseReleased(ModuleBase_IViewWindow* theWnd, QMouseEvent* theEvent)
{
ModuleBase_IWorkshop* aWorkshop = myModule->workshop();
- ModuleBase_Operation* aOp = aWorkshop->currentOperation();
- if (!aOp)
- return;
- if (!sketchOperationIdList().contains(aOp->id()))
- return;
-
- // Only for sketcher operations
ModuleBase_IViewer* aViewer = aWorkshop->viewer();
- if (myIsDragging) {
- aWorkshop->viewer()->enableSelection(myPreviousSelectionEnabled);
- myIsDragging = false;
- if (myDragDone) {
- //aOp->commit();
- myFeature2AttributeMap.clear();
-
- // Reselect edited object
- /*aViewer->AISContext()->MoveTo(theEvent->x(), theEvent->y(), theWnd->v3dView());
- if (theEvent->modifiers() & Qt::ShiftModifier)
- aViewer->AISContext()->ShiftSelect();
- else
- aViewer->AISContext()->Select();
- */
- return;
+ if (!aViewer->canDragByMouse())
+ return;
+ ModuleBase_Operation* aOp = getCurrentOperation();
+ if (aOp) {
+ if (isNestedSketchOperation(aOp)) {
+ get2dPoint(theWnd, theEvent, myClickedPoint);
+
+ // Only for sketcher operations
+ if (myIsDragging) {
+ if (myDragDone) {
+ //aOp->commit();
+ myCurrentSelection.clear();
+ // Reselect edited object
+ /*aViewer->AISContext()->MoveTo(theEvent->x(), theEvent->y(), theWnd->v3dView());
+ if (theEvent->modifiers() & Qt::ShiftModifier)
+ aViewer->AISContext()->ShiftSelect();
+ else
+ aViewer->AISContext()->Select();
+ */
+ }
+ }
}
}
+ aWorkshop->viewer()->enableSelection(myPreviousSelectionEnabled);
+ myIsDragging = false;
}
void PartSet_SketcherMgr::onMouseMoved(ModuleBase_IViewWindow* theWnd, QMouseEvent* theEvent)
{
- if (myIsDragging) {
- ModuleBase_IWorkshop* aWorkshop = myModule->workshop();
- // 1. it is necessary to save current selection in order to restore it after the features moving
- FeatureToSelectionMap aCurrentSelection;
- getCurrentSelection(myFeature2AttributeMap, myCurrentSketch, aWorkshop, aCurrentSelection);
+ if (isNestedCreateOperation(getCurrentOperation()) && !myIsMouseOverViewProcessed) {
+ myIsMouseOverViewProcessed = true;
+ // 1. perform the widget mouse move functionality and display the presentation
+ ModuleBase_Operation* aOperation = getCurrentOperation();
+ ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
+ ModuleBase_ModelWidget* anActiveWdg = aPanel->activeWidget();
+ // the mouse move should be processed in the widget, if it can in order to visualize correct
+ // presentation. These widgets correct the feature attribute according to the mouse position
+ PartSet_WidgetPoint2D* aPoint2DWdg = dynamic_cast<PartSet_WidgetPoint2D*>(anActiveWdg);
+ if (aPoint2DWdg) {
+ aPoint2DWdg->onMouseMove(theWnd, theEvent);
+ }
+ PartSet_WidgetPoint2dDistance* aDistanceWdg = dynamic_cast<PartSet_WidgetPoint2dDistance*>
+ (anActiveWdg);
+ if (aDistanceWdg) {
+ aDistanceWdg->onMouseMove(theWnd, theEvent);
+ }
+ // the feature is to be erased here, but it is correct to call canDisplayObject because
+ // there can be additional check (e.g. editor widget in distance constraint)
+ visualizeFeature(aOperation, canDisplayObject());
+ }
+ myClickedPoint.clear();
+
+ if (myIsDragging) {
+ // 1. the current selection is saved in the mouse press method in order to restore it after moving
// 2. the enable selection in the viewer should be temporary switched off in order to ignore
// mouse press signal in the viewer(it call Select for AIS context and the dragged objects are
// deselected). This flag should be restored in the slot, processed the mouse release signal.
ModuleBase_IViewer* aViewer = myModule->workshop()->viewer();
aViewer->enableSelection(false);
- ModuleBase_Operation* aOperation = myModule->workshop()->currentOperation();
- if (aOperation->id().toStdString() == SketchPlugin_Sketch::ID())
+ ModuleBase_Operation* aOperation = getCurrentOperation();
+ if (!aOperation)
+ return;
+ if (isSketchOperation(aOperation))
return; // No edit operation activated
Handle(V3d_View) aView = theWnd->v3dView();
gp_Pnt aPoint = PartSet_Tools::convertClickToPoint(theEvent->pos(), aView);
double aX, aY;
PartSet_Tools::convertTo2D(aPoint, myCurrentSketch, aView, aX, aY);
- double dX = aX - myCurX;
- double dY = aY - myCurY;
+ double dX = aX - myCurrentPoint.myCurX;
+ double dY = aY - myCurrentPoint.myCurY;
+ ModuleBase_IWorkshop* aWorkshop = myModule->workshop();
XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(aWorkshop);
XGUI_Displayer* aDisplayer = aConnector->workshop()->displayer();
// 3. the flag to disable the update viewer should be set in order to avoid blinking in the
static Events_ID aMoveEvent = Events_Loop::eventByName(EVENT_OBJECT_MOVED);
//static Events_ID aUpdateEvent = Events_Loop::eventByName(EVENT_OBJECT_UPDATED);
-
- FeatureToAttributesMap::const_iterator anIt = myFeature2AttributeMap.begin(),
- aLast = myFeature2AttributeMap.end();
+ FeatureToSelectionMap::const_iterator anIt = myCurrentSelection.begin(),
+ aLast = myCurrentSelection.end();
// 4. the features and attributes modification(move)
for (; anIt != aLast; anIt++) {
FeaturePtr aFeature = anIt.key();
- AttributeList anAttributes = anIt.value();
+ std::set<AttributePtr> anAttributes = anIt.value().first;
// Process selection by attribute: the priority to the attribute
if (!anAttributes.empty()) {
- AttributeList::const_iterator anAttIt = anAttributes.begin(), anAttLast = anAttributes.end();
+ std::set<AttributePtr>::const_iterator anAttIt = anAttributes.begin(),
+ anAttLast = anAttributes.end();
for (; anAttIt != anAttLast; anAttIt++) {
AttributePtr anAttr = *anAttIt;
if (anAttr.get() == NULL)
//Events_Loop::loop()->flush(aUpdateEvent); // up update events - to redisplay presentations
// 5. it is necessary to save current selection in order to restore it after the features moving
- FeatureToSelectionMap::const_iterator aSIt = aCurrentSelection.begin(),
- aSLast = aCurrentSelection.end();
- SelectMgr_IndexedMapOfOwner anOwnersToSelect;
- for (; aSIt != aSLast; aSIt++) {
- anOwnersToSelect.Clear();
- getSelectionOwners(aSIt->first, myCurrentSketch, aWorkshop, aCurrentSelection,
- anOwnersToSelect);
- aConnector->workshop()->selector()->setSelectedOwners(anOwnersToSelect, false);
- }
-
+ restoreSelection();
// 6. restore the update viewer flag and call this update
aDisplayer->enableUpdateViewer(isEnableUpdateViewer);
aDisplayer->updateViewer();
+
myDragDone = true;
- myCurX = aX;
- myCurY = aY;
+ myCurrentPoint.setValue(aX, aY);
}
}
void PartSet_SketcherMgr::onMouseDoubleClick(ModuleBase_IViewWindow* theWnd, QMouseEvent* theEvent)
{
- ModuleBase_Operation* aOperation = myModule->workshop()->currentOperation();
+ ModuleBase_Operation* aOperation = getCurrentOperation();
if (aOperation && aOperation->isEditOperation()) {
std::string aId = aOperation->id().toStdString();
- if ((aId == SketchPlugin_ConstraintLength::ID()) ||
- (aId == SketchPlugin_ConstraintDistance::ID()) ||
- (aId == SketchPlugin_ConstraintRadius::ID()))
+ if (isDistanceOperation(aOperation))
{
// Activate dimension value editing on double click
ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
}
}
+void PartSet_SketcherMgr::onApplicationStarted()
+{
+ ModuleBase_IWorkshop* anIWorkshop = myModule->workshop();
+ XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(anIWorkshop);
+ XGUI_Workshop* aWorkshop = aConnector->workshop();
+ XGUI_PropertyPanel* aPropertyPanel = aWorkshop->propertyPanel();
+ if (aPropertyPanel) {
+ connect(aPropertyPanel, SIGNAL(beforeWidgetActivated(ModuleBase_ModelWidget*)),
+ this, SLOT(onBeforeWidgetActivated(ModuleBase_ModelWidget*)));
+ }
+
+ XGUI_ViewerProxy* aViewerProxy = aWorkshop->viewer();
+ connect(aViewerProxy, SIGNAL(enterViewPort()), this, SLOT(onEnterViewPort()));
+ connect(aViewerProxy, SIGNAL(leaveViewPort()), this, SLOT(onLeaveViewPort()));
+
+ XGUI_ContextMenuMgr* aContextMenuMgr = aWorkshop->contextMenuMgr();
+ connect(aContextMenuMgr, SIGNAL(beforeContextMenu()), this, SLOT(onBeforeContextMenu()));
+ connect(aContextMenuMgr, SIGNAL(afterContextMenu()), this, SLOT(onAfterContextMenu()));
+}
+
+void PartSet_SketcherMgr::onBeforeWidgetActivated(ModuleBase_ModelWidget* theWidget)
+{
+ if (!myClickedPoint.myIsInitialized)
+ return;
+
+ ModuleBase_Operation* aOperation = getCurrentOperation();
+ // the distance constraint feature should not use the clickedd point
+ // this is workaround in order to don't throw down the flyout point value,
+ // set by execute() method of these type of features
+ if (isDistanceOperation(aOperation))
+ return;
+
+ PartSet_WidgetPoint2D* aPnt2dWgt = dynamic_cast<PartSet_WidgetPoint2D*>(theWidget);
+ if (aPnt2dWgt) {
+ aPnt2dWgt->setPoint(myClickedPoint.myCurX, myClickedPoint.myCurY);
+ }
+}
+
+void PartSet_SketcherMgr::onBeforeContextMenu()
+{
+ myIsPopupMenuActive = true;
+}
+
+void PartSet_SketcherMgr::onAfterContextMenu()
+{
+ myIsPopupMenuActive = false;
+}
+
void PartSet_SketcherMgr::get2dPoint(ModuleBase_IViewWindow* theWnd, QMouseEvent* theEvent,
- double& theX, double& theY)
+ Point& thePoint)
{
Handle(V3d_View) aView = theWnd->v3dView();
gp_Pnt aPoint = PartSet_Tools::convertClickToPoint(theEvent->pos(), aView);
- PartSet_Tools::convertTo2D(aPoint, myCurrentSketch, aView, theX, theY);
+ double aX, anY;
+ PartSet_Tools::convertTo2D(aPoint, myCurrentSketch, aView, aX, anY);
+ thePoint.setValue(aX, anY);
}
void PartSet_SketcherMgr::launchEditing()
// point
QIntList aModes;
aModes << TopAbs_VERTEX << TopAbs_EDGE;
+ // TODO: #391 - to be uncommented
+ /*aModes.append(AIS_DSM_Text);
+ aModes.append(AIS_DSM_Line);
+ aModes.append(AIS_Shape::SelectionMode((TopAbs_ShapeEnum) TopAbs_VERTEX));
+ aModes.append(AIS_Shape::SelectionMode((TopAbs_ShapeEnum) TopAbs_EDGE));*/
+
XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(myModule->workshop());
aConnector->activateSubShapesSelection(aModes);
- if (!myFeature2AttributeMap.empty()) {
- FeaturePtr aFeature = myFeature2AttributeMap.begin().key();
+ if (!myCurrentSelection.empty()) {
+ FeaturePtr aFeature = myCurrentSelection.begin().key();
std::shared_ptr<SketchPlugin_Feature> aSPFeature =
std::dynamic_pointer_cast<SketchPlugin_Feature>(aFeature);
if (aSPFeature) {
aIds << SketchPlugin_ConstraintRadius::ID().c_str();
aIds << SketchPlugin_ConstraintPerpendicular::ID().c_str();
aIds << SketchPlugin_ConstraintParallel::ID().c_str();
+ aIds << SketchPlugin_ConstraintHorizontal::ID().c_str();
+ aIds << SketchPlugin_ConstraintVertical::ID().c_str();
+ aIds << SketchPlugin_ConstraintEqual::ID().c_str();
+ aIds << SketchPlugin_ConstraintTangent::ID().c_str();
}
return aIds;
}
+bool PartSet_SketcherMgr::isSketchOperation(ModuleBase_Operation* theOperation)
+{
+ return theOperation && theOperation->id().toStdString() == SketchPlugin_Sketch::ID();
+}
+
+bool PartSet_SketcherMgr::isNestedSketchOperation(ModuleBase_Operation* theOperation)
+{
+ return theOperation &&
+ PartSet_SketcherMgr::sketchOperationIdList().contains(theOperation->id());
+}
+
+bool PartSet_SketcherMgr::isNestedCreateOperation(ModuleBase_Operation* theOperation)
+{
+ return theOperation && !theOperation->isEditOperation() && isNestedSketchOperation(theOperation);
+}
+
+bool PartSet_SketcherMgr::isEntityOperation(ModuleBase_Operation* theOperation)
+{
+ std::string aId = theOperation ? theOperation->id().toStdString() : "";
+
+ return (aId == SketchPlugin_Line::ID()) ||
+ (aId == SketchPlugin_Point::ID()) ||
+ (aId == SketchPlugin_Arc::ID()) ||
+ (aId == SketchPlugin_Circle::ID());
+}
+
+bool PartSet_SketcherMgr::isDistanceOperation(ModuleBase_Operation* theOperation)
+{
+ std::string aId = theOperation ? theOperation->id().toStdString() : "";
+
+ return (aId == SketchPlugin_ConstraintLength::ID()) ||
+ (aId == SketchPlugin_ConstraintDistance::ID()) ||
+ (aId == SketchPlugin_ConstraintRadius::ID());
+}
+
void PartSet_SketcherMgr::startSketch(ModuleBase_Operation* theOperation)
{
// Display all sketcher sub-Objects
void PartSet_SketcherMgr::stopSketch(ModuleBase_Operation* theOperation)
{
+ myIsMouseOverWindow = false;
+
XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(myModule->workshop());
XGUI_Displayer* aDisplayer = aConnector->workshop()->displayer();
aDisplayer->updateViewer();
}
+void PartSet_SketcherMgr::startNestedSketch(ModuleBase_Operation* )
+{
+ connectToPropertyPanel(true);
+}
-void PartSet_SketcherMgr::onPlaneSelected(const std::shared_ptr<GeomAPI_Pln>& thePln)
+void PartSet_SketcherMgr::stopNestedSketch(ModuleBase_Operation* theOperation)
{
- myPlaneFilter->setPlane(thePln->impl<gp_Pln>());
+ connectToPropertyPanel(false);
+ myIsPropertyPanelValueChanged = false;
+ myIsMouseOverViewProcessed = true;
}
-void PartSet_SketcherMgr::getCurrentSelection(const FeatureToAttributesMap& theFeatureToAttributes,
- const FeaturePtr& theSketch,
- ModuleBase_IWorkshop* theWorkshop,
- FeatureToSelectionMap& theSelection)
+void PartSet_SketcherMgr::commitNestedSketch(ModuleBase_Operation* theOperation)
{
- FeatureToAttributesMap::const_iterator anIt = theFeatureToAttributes.begin(),
- aLast = theFeatureToAttributes.end();
- for (; anIt != aLast; anIt++) {
- FeaturePtr aFeature = anIt.key();
- getCurrentSelection(aFeature, theSketch, theWorkshop, theSelection);
+ if (isNestedCreateOperation(theOperation))
+ visualizeFeature(theOperation, true);
+}
+
+bool PartSet_SketcherMgr::canUndo() const
+{
+ return isNestedCreateOperation(getCurrentOperation());
+}
+
+bool PartSet_SketcherMgr::canRedo() const
+{
+ return isNestedCreateOperation(getCurrentOperation());
+}
+
+bool PartSet_SketcherMgr::canDisplayObject() const
+{
+ bool aCanDisplay = true;
+ if (!isNestedCreateOperation(getCurrentOperation()))
+ return aCanDisplay;
+
+ ModuleBase_Operation* aOperation = getCurrentOperation();
+ ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
+ ModuleBase_ModelWidget* anActiveWdg = aPanel ? aPanel->activeWidget() : 0;
+ // the active widget editor should not influence here. The presentation should be visible always
+ // when this widget is active.
+ if (anActiveWdg) {
+ ModuleBase_WidgetEditor* anEditorWdg = dynamic_cast<ModuleBase_WidgetEditor*>(anActiveWdg);
+ if (anEditorWdg) {
+ return aCanDisplay;
+ }
+ }
+ if (myIsPopupMenuActive)
+ return aCanDisplay;
+
+ // during a nested create operation, the feature is redisplayed only if the mouse over view
+ // of there was a value modified in the property panel after the mouse left the view
+ aCanDisplay = myIsPropertyPanelValueChanged || myIsMouseOverWindow;
+ return aCanDisplay;
+}
+
+bool PartSet_SketcherMgr::canSetAuxiliary(bool& theValue) const
+{
+ bool anEnabled = false;
+ ModuleBase_Operation* anOperation = getCurrentOperation();
+
+ bool isActiveSketch = PartSet_SketcherMgr::isSketchOperation(anOperation) ||
+ PartSet_SketcherMgr::isNestedSketchOperation(anOperation);
+ if (!isActiveSketch)
+ return anEnabled;
+
+ QObjectPtrList anObjects;
+ // 1. change auxiliary type of a created feature
+ if (PartSet_SketcherMgr::isNestedCreateOperation(anOperation) &&
+ PartSet_SketcherMgr::isEntityOperation(anOperation) ) {
+ anObjects.append(anOperation->feature());
+ }
+ else {
+ /// The operation should not be aborted here, because the method does not changed
+ /// the auxilliary state, but checks the possibility to perform this
+ ///if (PartSet_SketcherMgr::isNestedSketchOperation(anOperation))
+ /// anOperation->abort();
+ // 2. change auxiliary type of selected sketch entities
+ ModuleBase_ISelection* aSelection = myModule->workshop()->selection();
+ anObjects = aSelection->selectedPresentations();
+ }
+ anEnabled = anObjects.size() > 0;
+
+ bool isNotAuxiliaryFound = false;
+ if (anObjects.size() > 0) {
+ QObjectPtrList::const_iterator anIt = anObjects.begin(), aLast = anObjects.end();
+ for (; anIt != aLast && !isNotAuxiliaryFound; anIt++) {
+ FeaturePtr aFeature = ModelAPI_Feature::feature(*anIt);
+ if (aFeature.get() != NULL) {
+ std::shared_ptr<SketchPlugin_Feature> aSketchFeature =
+ std::dynamic_pointer_cast<SketchPlugin_Feature>(aFeature);
+ if (aSketchFeature.get() != NULL) {
+ std::string anAttribute = SketchPlugin_SketchEntity::AUXILIARY_ID();
+
+ std::shared_ptr<ModelAPI_AttributeBoolean> anAuxiliaryAttr =
+ std::dynamic_pointer_cast<ModelAPI_AttributeBoolean>(aSketchFeature->data()->attribute(anAttribute));
+ if (anAuxiliaryAttr)
+ isNotAuxiliaryFound = !anAuxiliaryAttr->value();
+ }
+ }
+ }
+ }
+ theValue = anObjects.size() && !isNotAuxiliaryFound;
+ return anEnabled;
+}
+
+void PartSet_SketcherMgr::setAuxiliary(const bool isChecked)
+{
+ ModuleBase_Operation* anOperation = getCurrentOperation();
+
+ bool isActiveSketch = PartSet_SketcherMgr::isSketchOperation(anOperation) ||
+ PartSet_SketcherMgr::isNestedSketchOperation(anOperation);
+ if (!isActiveSketch)
+ return;
+
+ QObjectPtrList anObjects;
+ bool isUseTransaction = false;
+ // 1. change auxiliary type of a created feature
+ if (PartSet_SketcherMgr::isNestedCreateOperation(anOperation) &&
+ PartSet_SketcherMgr::isEntityOperation(anOperation) ) {
+ anObjects.append(anOperation->feature());
+ }
+ else {
+ isUseTransaction = true;
+ // 2. change auxiliary type of selected sketch entities
+ ModuleBase_ISelection* aSelection = myModule->workshop()->selection();
+ anObjects = aSelection->selectedPresentations();
}
+
+ QAction* anAction = myModule->action("AUXILIARY_CMD");
+ SessionPtr aMgr = ModelAPI_Session::get();
+ if (isUseTransaction) {
+ if (PartSet_SketcherMgr::isNestedSketchOperation(anOperation))
+ anOperation->abort();
+ aMgr->startOperation(anAction->text().toStdString());
+ }
+ storeSelection();
+
+ if (anObjects.size() > 0) {
+ QObjectPtrList::const_iterator anIt = anObjects.begin(), aLast = anObjects.end();
+ for (; anIt != aLast; anIt++) {
+ FeaturePtr aFeature = ModelAPI_Feature::feature(*anIt);
+ if (aFeature.get() != NULL) {
+ std::shared_ptr<SketchPlugin_Feature> aSketchFeature =
+ std::dynamic_pointer_cast<SketchPlugin_Feature>(aFeature);
+ if (aSketchFeature.get() != NULL) {
+ std::string anAttribute = SketchPlugin_SketchEntity::AUXILIARY_ID();
+
+ std::shared_ptr<ModelAPI_AttributeBoolean> anAuxiliaryAttr =
+ std::dynamic_pointer_cast<ModelAPI_AttributeBoolean>(aSketchFeature->data()->attribute(anAttribute));
+ if (anAuxiliaryAttr)
+ anAuxiliaryAttr->setValue(isChecked);
+ }
+ }
+ }
+ }
+ if (isUseTransaction) {
+ aMgr->finishOperation();
+ }
+ Events_Loop::loop()->flush(Events_Loop::eventByName(EVENT_OBJECT_UPDATED));
+ restoreSelection();
+}
+
+void PartSet_SketcherMgr::onPlaneSelected(const std::shared_ptr<GeomAPI_Pln>& thePln)
+{
+ myPlaneFilter->setPlane(thePln->impl<gp_Pln>());
}
void PartSet_SketcherMgr::getCurrentSelection(const FeaturePtr& theFeature,
continue;
Handle(AIS_InteractiveObject) anIO = Handle(AIS_InteractiveObject)::DownCast(
aBRepOwner->Selectable());
+ if (anIO != anAISIO)
+ continue;
+
if (aBRepOwner->HasShape()) {
const TopoDS_Shape& aShape = aBRepOwner->Shape();
TopAbs_ShapeEnum aShapeType = aShape.ShapeType();
void PartSet_SketcherMgr::getSelectionOwners(const FeaturePtr& theFeature,
const FeaturePtr& theSketch,
ModuleBase_IWorkshop* theWorkshop,
- //const std::set<AttributePtr>& theSelectedAttributes,
- //const std::set<ResultPtr>& theSelectedResults,
const FeatureToSelectionMap& theSelection,
SelectMgr_IndexedMapOfOwner& anOwnersToSelect)
{
return;
FeatureToSelectionMap::const_iterator anIt = theSelection.find(theFeature);
- std::set<AttributePtr> aSelectedAttributes = anIt->second.first;
- std::set<ResultPtr> aSelectedResults = anIt->second.second;
+ std::set<AttributePtr> aSelectedAttributes = anIt.value().first;
+ std::set<ResultPtr> aSelectedResults = anIt.value().second;
ModuleBase_IViewer* aViewer = theWorkshop->viewer();
Handle(AIS_InteractiveContext) aContext = aViewer->AISContext();
XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(theWorkshop);
XGUI_Displayer* aDisplayer = aConnector->workshop()->displayer();
+ // 1. found the feature's owners. Check the AIS objects of the constructions
+ AISObjectPtr aAISObj = aDisplayer->getAISObject(theFeature);
+ if (aAISObj.get() != NULL && aSelectedAttributes.empty() && aSelectedResults.empty()) {
+ Handle(AIS_InteractiveObject) anAISIO = aAISObj->impl<Handle(AIS_InteractiveObject)>();
+
+ SelectMgr_IndexedMapOfOwner aSelectedOwners;
+ aConnector->workshop()->selector()->selection()->entityOwners(anAISIO, aSelectedOwners);
+ for (Standard_Integer i = 1, n = aSelectedOwners.Extent(); i <= n; i++) {
+ Handle(SelectMgr_EntityOwner) anOwner = aSelectedOwners(i);
+ if (!anOwner.IsNull())
+ anOwnersToSelect.Add(anOwner);
+ }
+ }
+
+ // 2. found the feature results's owners
std::list<ResultPtr> aResults = theFeature->results();
std::list<ResultPtr>::const_iterator aIt;
for (aIt = aResults.begin(); aIt != aResults.end(); ++aIt)
}
}
}
+
+void PartSet_SketcherMgr::connectToPropertyPanel(const bool isToConnect)
+{
+ ModuleBase_IWorkshop* anIWorkshop = myModule->workshop();
+ XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(anIWorkshop);
+ XGUI_Workshop* aWorkshop = aConnector->workshop();
+ XGUI_PropertyPanel* aPropertyPanel = aWorkshop->propertyPanel();
+ if (aPropertyPanel) {
+ const QList<ModuleBase_ModelWidget*>& aWidgets = aPropertyPanel->modelWidgets();
+ foreach (ModuleBase_ModelWidget* aWidget, aWidgets) {
+ if (isToConnect) {
+ connect(aWidget, SIGNAL(beforeValuesChanged()),
+ this, SLOT(onBeforeValuesChangedInPropertyPanel()));
+ connect(aWidget, SIGNAL(valuesChanged()), this, SLOT(onValuesChangedInPropertyPanel()));
+ connect(aWidget, SIGNAL(afterValuesChanged()),
+ this, SLOT(onAfterValuesChangedInPropertyPanel()));
+ }
+ else {
+ disconnect(aWidget, SIGNAL(beforeValuesChanged()),
+ this, SLOT(onBeforeValuesChangedInPropertyPanel()));
+ disconnect(aWidget, SIGNAL(valuesChanged()), this, SLOT(onValuesChangedInPropertyPanel()));
+ disconnect(aWidget, SIGNAL(afterValuesChanged()),
+ this, SLOT(onAfterValuesChangedInPropertyPanel()));
+ }
+ }
+ }
+}
+
+ModuleBase_Operation* PartSet_SketcherMgr::getCurrentOperation() const
+{
+ return myModule->workshop()->currentOperation();
+}
+
+void PartSet_SketcherMgr::visualizeFeature(ModuleBase_Operation* theOperation,
+ const bool isToDisplay)
+{
+ if (!theOperation || theOperation->isEditOperation())
+ return;
+
+ ModuleBase_IWorkshop* aWorkshop = myModule->workshop();
+ XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(aWorkshop);
+ XGUI_Displayer* aDisplayer = aConnector->workshop()->displayer();
+
+ // 1. change visibility of the object itself, here the presentable object is processed,
+ // e.g. constraints features
+ FeaturePtr aFeature = theOperation->feature();
+ std::list<ResultPtr> aResults = aFeature->results();
+ if (isToDisplay)
+ aDisplayer->display(aFeature, false);
+ else
+ aDisplayer->erase(aFeature, false);
+
+ // change visibility of the object results, e.g. non-constraint features
+ std::list<ResultPtr>::const_iterator aIt;
+ for (aIt = aResults.begin(); aIt != aResults.end(); ++aIt) {
+ if (isToDisplay) {
+ aDisplayer->display(*aIt, false);
+ }
+ else {
+ aDisplayer->erase(*aIt, false);
+ }
+ }
+ aDisplayer->updateViewer();
+}
+
+void PartSet_SketcherMgr::storeSelection(const bool theHighlightedOnly)
+{
+ ModuleBase_IWorkshop* aWorkshop = myModule->workshop();
+ ModuleBase_ISelection* aSelect = aWorkshop->selection();
+ QList<ModuleBase_ViewerPrs> aHighlighted = aSelect->getHighlighted();
+
+ QMap<FeaturePtr, QList<AttributePtr> > aFeature2AttributeMap;
+ if (theHighlightedOnly) {
+ fillFeature2Attribute(aHighlighted, aFeature2AttributeMap, myCurrentSketch);
+ }
+ else {
+ fillFeature2Attribute(aHighlighted, aFeature2AttributeMap, myCurrentSketch);
+
+ QList<ModuleBase_ViewerPrs> aSelected = aSelect->getSelected();
+ fillFeature2Attribute(aSelected, aFeature2AttributeMap, myCurrentSketch);
+ }
+
+ // 1. it is necessary to save current selection in order to restore it after the features moving
+ myCurrentSelection.clear();
+ QMap<FeaturePtr, QList<AttributePtr> >::const_iterator anIt = aFeature2AttributeMap.begin(),
+ aLast = aFeature2AttributeMap.end();
+ for (; anIt != aLast; anIt++) {
+ FeaturePtr aFeature = anIt.key();
+ getCurrentSelection(aFeature, myCurrentSketch, aWorkshop, myCurrentSelection);
+ }
+ //qDebug(QString(" storeSelection: %1").arg(myCurrentSelection.size()).toStdString().c_str());
+}
+
+void PartSet_SketcherMgr::restoreSelection()
+{
+ //qDebug(QString("restoreSelection: %1").arg(myCurrentSelection.size()).toStdString().c_str());
+ ModuleBase_IWorkshop* aWorkshop = myModule->workshop();
+ XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(aWorkshop);
+ FeatureToSelectionMap::const_iterator aSIt = myCurrentSelection.begin(),
+ aSLast = myCurrentSelection.end();
+ SelectMgr_IndexedMapOfOwner anOwnersToSelect;
+ for (; aSIt != aSLast; aSIt++) {
+ anOwnersToSelect.Clear();
+ getSelectionOwners(aSIt.key(), myCurrentSketch, aWorkshop, myCurrentSelection,
+ anOwnersToSelect);
+ aConnector->workshop()->selector()->setSelectedOwners(anOwnersToSelect, false);
+ }
+}