#include "ModuleBase_IPropertyPanel.h"
#include "ModuleBase_ISelection.h"
#include "ModuleBase_IViewer.h"
+#include "ModuleBase_Tools.h"
#include <ModelAPI_AttributeDouble.h>
#include <ModelAPI_Document.h>
#include <ModelAPI_Object.h>
#include <ModelAPI_Validator.h>
#include <ModelAPI_Session.h>
+#include <ModelAPI_Tools.h>
#include <GeomAPI_Pnt2d.h>
#include <QTimer>
+// the define to check the activated object as a sub-feature by argument of
+// the operation feature. E.g. rectangle feature(operation), line(in argument) to be not activated
+#define DEBUG_DO_NOT_ACTIVATE_SUB_FEATURE
+#ifdef DEBUG_DO_NOT_ACTIVATE_SUB_FEATURE
+#include <ModelAPI_AttributeRefList.h>
+#endif
+
+//#define DEBUG_OPERATION_START
+
#ifdef _DEBUG
#include <QDebug>
#endif
clearPreselection();
}
+void ModuleBase_OperationFeature::setEditOperation(const bool& isEditState
+ /*const bool theRestartTransaction*/)
+{
+ bool isCurrentEditState = isEditOperation();
+ if (isCurrentEditState == isEditState)
+ return;
+
+ /*
+ // this case is obsolete as it was not approved for reentrant sketch operation
+ // it was implemented when isEditState did not exist and only edit operation can be set
+ if (theRestartTransaction) {
+ // finsh previous create operation
+ emit beforeCommitted();
+ SessionPtr aMgr = ModelAPI_Session::get();
+ ModelAPI_Session::get()->finishOperation();
+
+ // start new edit operation
+ myIsEditing = true;
+ QString anId = getDescription()->operationId();
+ if (myIsEditing) {
+ anId = anId.append(EditSuffix());
+ }
+ ModelAPI_Session::get()->startOperation(anId.toStdString());
+ emit beforeStarted();
+ } else*/
+ myIsEditing = isEditState;
+
+ propertyPanel()->setEditingMode(isEditOperation());
+}
+
FeaturePtr ModuleBase_OperationFeature::feature() const
{
return myFeature;
return true; // rename operation
if (myFeature->isAction())
return true;
- //Get validators for the Id
- SessionPtr aMgr = ModelAPI_Session::get();
- ModelAPI_ValidatorsFactory* aFactory = aMgr->validators();
- bool aValid = aFactory->validate(myFeature);
- // the feature exec state should be checked in order to do not apply features, which result can not
- // be built. E.g. extrusion on sketch, where the "to" is a perpendicular plane to the sketch
- bool isDone = ( myFeature->data()->execState() == ModelAPI_StateDone
- || myFeature->data()->execState() == ModelAPI_StateMustBeUpdated );
-
- return aValid && isDone;
+ std::string anError = ModelAPI_Tools::getFeatureError(myFeature);
+ ModuleBase_Tools::translate(myFeature->getKind(), anError);
+ return anError.empty();
}
void ModuleBase_OperationFeature::startOperation()
if (!aFeature.get() || !isEditOperation())
return;
+ if (aFeature.get() && isEditOperation())
+ aFeature->setStable(false);
+
myVisualizedObjects.clear();
// store hidden result features
- std::list<ResultPtr> aResults = aFeature->results();
+ std::list<ResultPtr> aResults;
+ ModelAPI_Tools::allResults(aFeature, aResults);
std::list<ResultPtr>::const_iterator aIt;
for (aIt = aResults.begin(); aIt != aResults.end(); ++aIt) {
ObjectPtr anObject = *aIt;
return;
// store hidden result features
- std::list<ResultPtr> aResults = aFeature->results();
+ std::list<ResultPtr> aResults;
+ ModelAPI_Tools::allResults(aFeature, aResults);
std::list<ResultPtr>::const_iterator aIt;
for (aIt = aResults.begin(); aIt != aResults.end(); ++aIt) {
ObjectPtr anObject = *aIt;
}*/
}
- if (theFlushMessage)
+ if (theFlushMessage) {
Events_Loop::loop()->flush(Events_Loop::eventByName(EVENT_OBJECT_CREATED));
+ Events_Loop::loop()->flush(Events_Loop::eventByName(EVENT_OBJECT_UPDATED));
+ }
return myFeature;
}
if (aFeature) {
if (aFeature == theObj)
return true;
- std::list<ResultPtr> aResults = aFeature->results();
+ std::list<ResultPtr> aResults;
+ ModelAPI_Tools::allResults(aFeature, aResults);
std::list<ResultPtr>::const_iterator aIt;
for (aIt = aResults.cbegin(); aIt != aResults.cend(); ++aIt) {
- if (theObj == (*aIt))
- return true;
+ ResultPtr aResult = *aIt;
+ if (theObj == aResult)
+ return true;
+ }
+#ifdef DEBUG_DO_NOT_ACTIVATE_SUB_FEATURE
+ if (aFeature->isMacro()) {
+ // macro feature may refers to sub-features, which also should be deactivated when the operation
+ // is active, e.g. rectangle'lines.
+ FeaturePtr anObjectFeature = ModelAPI_Feature::feature(theObj);
+ std::list<AttributePtr> anAttributes = aFeature->data()->attributes(
+ ModelAPI_AttributeRefList::typeId());
+ std::list<AttributePtr>::const_iterator anIt = anAttributes.begin(), aLast = anAttributes.end();
+ bool aFoundObject = false;
+ for (; anIt != aLast && !aFoundObject; anIt++) {
+ std::shared_ptr<ModelAPI_AttributeRefList> aCurSelList =
+ std::dynamic_pointer_cast<ModelAPI_AttributeRefList>(*anIt);
+ for (int i = 0, aNb = aCurSelList->size(); i < aNb && !aFoundObject; i++) {
+ ObjectPtr anObject = aCurSelList->object(i);
+ FeaturePtr aFeature = std::dynamic_pointer_cast<ModelAPI_Feature>(anObject);
+ if (aFeature.get()) {
+ aFoundObject = anObjectFeature == aFeature;
+ }
+ }
+ }
+ return aFoundObject;
}
+#endif
}
return false;
}
return myVisualizedObjects.find(theObject) != myVisualizedObjects.end();
}
-void ModuleBase_OperationFeature::start()
+bool ModuleBase_OperationFeature::start()
{
+#ifdef DEBUG_OPERATION_START
+ qDebug("ModuleBase_OperationFeature::start -- begin");
+#endif
setIsModified(false);
QString anId = getDescription()->operationId();
if (myIsEditing) {
}
ModelAPI_Session::get()->startOperation(anId.toStdString());
+ emit beforeStarted();
startOperation();
if (!myIsEditing) {
// in order to update commands status in the workshop, to be exact the feature action
// to be unchecked
abort();
- return;
+#ifdef DEBUG_OPERATION_START
+ qDebug("ModuleBase_OperationFeature::start -- end : IMPOSSIBLE to start");
+#endif
+ return false;
}
}
- /// Set current feature and remeber old current feature
- if (myIsEditing) {
- SessionPtr aMgr = ModelAPI_Session::get();
- DocumentPtr aDoc = aMgr->activeDocument();
- // the parameter of current feature should be false, we should use all feature, not only visible
- // in order to correctly save the previous feature of the nested operation, where the
- // features can be not visible in the tree. The problem case is Edit sketch entitity(line)
- // in the Sketch, created in ExtrusionCut operation. The entity disappears by commit.
- // When sketch entity operation started, the sketch should be cashed here as the current.
- // Otherwise(the flag is true), the ExtrusionCut is cashed, when commit happens, the sketch
- // is disabled, sketch entity is disabled as extrusion cut is created earliest then sketch.
- // As a result the sketch disappears from the viewer. However after commit it is displayed back.
- myPreviousCurrentFeature = aDoc->currentFeature(false);
- aDoc->setCurrentFeature(feature(), false);
- }
-
- startOperation();
+ //Already called startOperation();
emit started();
-
+#ifdef DEBUG_OPERATION_START
+ qDebug("ModuleBase_OperationFeature::start -- end");
+#endif
+ return true;
}
void ModuleBase_OperationFeature::abort()
{
+#ifdef DEBUG_OPERATION_START
+ qDebug("ModuleBase_OperationFeature::abort -- begin");
+#endif
+
+ emit beforeAborted();
+
// the viewer update should be blocked in order to avoid the features blinking before they are
// hidden
std::shared_ptr<Events_Message> aMsg = std::shared_ptr<Events_Message>(
if (aPropertyPanel)
aPropertyPanel->cleanContent();
- SessionPtr aMgr = ModelAPI_Session::get();
- if (myIsEditing) {
- DocumentPtr aDoc = aMgr->activeDocument();
- bool aIsOp = aMgr->isOperation();
- if (!aIsOp)
- aMgr->startOperation();
- aDoc->setCurrentFeature(myPreviousCurrentFeature, true);
- if (!aIsOp)
- aMgr->finishOperation();
- myPreviousCurrentFeature = FeaturePtr();
- }
- abortOperation();
+ if (myFeature.get())
+ myFeature->setStable(true);
+ abortOperation();
stopOperation();
+ SessionPtr aMgr = ModelAPI_Session::get();
aMgr->abortOperation();
emit stopped();
// the viewer update should be unblocked in order to avoid the features blinking before they are
Events_Loop::loop()->send(aMsg);
emit aborted();
+#ifdef DEBUG_OPERATION_START
+ qDebug("ModuleBase_OperationFeature::abort -- end");
+#endif
}
bool ModuleBase_OperationFeature::commit()
{
+#ifdef DEBUG_OPERATION_START
+ qDebug("ModuleBase_OperationFeature::commit -- begin");
+#endif
+ ModuleBase_IPropertyPanel* aPanel = propertyPanel();
+ if (aPanel) {
+ ModuleBase_ModelWidget* anActiveWidget = aPanel->activeWidget();
+ if (anActiveWidget && anActiveWidget->getValueState() == ModuleBase_ModelWidget::ModifiedInPP) {
+ anActiveWidget->storeValue();
+ }
+ }
if (canBeCommitted()) {
+ emit beforeCommitted();
// the widgets of property panel should not process any events come from data mode
// after commit clicked. Some signal such as redisplay/create influence on content
// of the object browser and viewer context. Therefore it influence to the current
if (aPropertyPanel)
aPropertyPanel->cleanContent();
+ myFeature->setStable(true);
+
SessionPtr aMgr = ModelAPI_Session::get();
/// Set current feature and remeber old current feature
- if (myIsEditing) {
- DocumentPtr aDoc = aMgr->activeDocument();
- bool aIsOp = aMgr->isOperation();
- if (!aIsOp)
- aMgr->startOperation();
- aDoc->setCurrentFeature(myPreviousCurrentFeature, true);
- if (!aIsOp)
- aMgr->finishOperation();
- myPreviousCurrentFeature = FeaturePtr();
- }
+
commitOperation();
aMgr->finishOperation();
emit committed();
afterCommitOperation();
+#ifdef DEBUG_OPERATION_START
+ qDebug("ModuleBase_OperationFeature::commit -- end : IMPOSSIBLE to commit");
+#endif
return true;
}
+#ifdef DEBUG_OPERATION_START
+ qDebug("ModuleBase_OperationFeature::commit -- end");
+#endif
return false;
}
-void ModuleBase_OperationFeature::activateByPreselection()
+ModuleBase_ModelWidget* ModuleBase_OperationFeature::activateByPreselection(
+ const std::string& theGreedAttributeId)
{
+ ModuleBase_ModelWidget* aWidget = 0;
if (myPreSelection.empty())
- return;
+ return aWidget;
- ModuleBase_ISelection::filterPreselectionOnEqualPoints(myPreSelection);
-
- ModuleBase_ModelWidget* aFilledWgt = 0;
ModuleBase_IPropertyPanel* aPropertyPanel = propertyPanel();
+ ModuleBase_ModelWidget* aFilledWgt = 0;
if (aPropertyPanel) {
const QList<ModuleBase_ModelWidget*>& aWidgets = aPropertyPanel->modelWidgets();
+ QList<ModuleBase_ModelWidget*>::const_iterator aWIt;
+ ModuleBase_ModelWidget* aWgt = 0;
if (!aWidgets.empty()) {
- ModuleBase_ModelWidget* aWgt = 0;
- QList<ModuleBase_ModelWidget*>::const_iterator aWIt;
- bool isSet = false;
- // 1. apply the selection to controls
- for (aWIt = aWidgets.constBegin(); aWIt != aWidgets.constEnd(); ++aWIt) {
- aWgt = (*aWIt);
- if (!aWgt->canSetValue())
- continue;
- aPropertyPanel->setPreselectionWidget(aWgt);
- if (!aWgt->setSelection(myPreSelection, true)) {
- isSet = false;
- break;
- } else {
- isSet = true;
- aFilledWgt = aWgt;
+ // equal vertices should not be used here
+ ModuleBase_ISelection::filterSelectionOnEqualPoints(myPreSelection);
+
+ if (!theGreedAttributeId.empty()) {
+ // set preselection to greed widget
+ for (aWIt = aWidgets.constBegin(); aWIt != aWidgets.constEnd(); ++aWIt) {
+ aWgt = (*aWIt);
+ if (aWgt->attributeID() == theGreedAttributeId) {
+ aPropertyPanel->setPreselectionWidget(aWgt);
+ if (aWgt->setSelection(myPreSelection, true)) {
+ aPropertyPanel->setPreselectionWidget(NULL);
+ aFilledWgt = aWgt;
+ break;
+ }
+ else { // do not process invalid for greed widget selection
+ break;
+ }
+ }
+ }
+ }
+ else {
+ bool isSet = false;
+ // 1. apply the selection to controls
+ for (aWIt = aWidgets.constBegin(); aWIt != aWidgets.constEnd(); ++aWIt) {
+ aWgt = (*aWIt);
+ if (!aWgt->canAcceptFocus())
+ continue;
+ aPropertyPanel->setPreselectionWidget(aWgt);
+ if (myPreSelection.empty() || !aWgt->setSelection(myPreSelection, true)) {
+ isSet = false;
+ break;
+ } else {
+ isSet = true;
+ aFilledWgt = aWgt;
+ }
}
}
aPropertyPanel->setPreselectionWidget(NULL);
// in order to redisplay object in the viewer, the update/redisplay signals should be flushed
// it is better to perform it not in setSelection of each widget, but do it here,
// after the preselection is processed
- ModuleBase_ModelWidget::updateObject(myFeature);
-
- // 3. a signal should be emitted before the next widget activation
- // because, the activation of the next widget will give a focus to the widget. As a result
- // the value of the widget is initialized. And commit may happens until the value is entered.
- if (aFilledWgt)
- emit activatedByPreselection();
+ ModuleBase_Tools::flushUpdated(myFeature);
}
- // 4. activate the next obligatory widget
- aPropertyPanel->activateNextWidget(aFilledWgt);
}
-
clearPreselection();
+
+ return aFilledWgt;
}
void ModuleBase_OperationFeature::setParentFeature(CompositeFeaturePtr theParent)
return myParentFeature;
}
+void ModuleBase_OperationFeature::setPreviousCurrentFeature(const FeaturePtr& theFeature)
+{
+ myPreviousCurrentFeature = theFeature;
+}
+
+FeaturePtr ModuleBase_OperationFeature::previousCurrentFeature()
+{
+ return myPreviousCurrentFeature;
+}
+
void ModuleBase_OperationFeature::initSelection(ModuleBase_ISelection* theSelection,
ModuleBase_IViewer* theViewer)
{
- clearPreselection();
-
- QList<ModuleBase_ViewerPrs> aPreSelected;
+ QList<ModuleBase_ViewerPrsPtr> aPreSelected;
// Check that the selected result are not results of operation feature
FeaturePtr aFeature = feature();
if (aFeature) {
- QList<ModuleBase_ViewerPrs> aSelected = theSelection->getSelected(ModuleBase_ISelection::AllControls);
+ QList<ModuleBase_ViewerPrsPtr> aSelected = theSelection->getSelected(ModuleBase_ISelection::AllControls);
- std::list<ResultPtr> aResults = aFeature->results();
+ std::list<ResultPtr> aResults;
+ ModelAPI_Tools::allResults(aFeature, aResults);
QObjectPtrList aResList;
std::list<ResultPtr>::const_iterator aIt;
for (aIt = aResults.begin(); aIt != aResults.end(); ++aIt)
aResList.append(*aIt);
- foreach (ModuleBase_ViewerPrs aPrs, aSelected) {
- if ((!aResList.contains(aPrs.object())) && (aPrs.object() != aFeature))
+ foreach (ModuleBase_ViewerPrsPtr aPrs, aSelected) {
+ if ((!aResList.contains(aPrs->object())) && (aPrs->object() != aFeature))
aPreSelected.append(aPrs);
}
} else
aPreSelected = theSelection->getSelected(ModuleBase_ISelection::AllControls);
- myPreSelection = aPreSelected;
+ setPreselection(aPreSelected);
+}
+
+void ModuleBase_OperationFeature::setPreselection(const QList<ModuleBase_ViewerPrsPtr>& theValues)
+{
+ clearPreselection();
+ myPreSelection = theValues;
}
void ModuleBase_OperationFeature::clearPreselection()
for (aWIt = aWidgets.constBegin(); aWIt != aWidgets.constEnd(); ++aWIt) {
ModuleBase_ModelWidget* aWgt = (*aWIt);
connect(aWgt, SIGNAL(valuesChanged()), this, SLOT(onValuesChanged()));
+ connect(aWgt, SIGNAL(valueStateChanged(int)), this, SLOT(onValueStateChanged(int)));
}
}