!-------------------------------------------------------------------- ! Parameters for Shape Healing !-------------------------------------------------------------------- ShapeProcess.exec.op : FixShape,FixFaceSize,DropSmallEdges,SameParameter ShapeProcess.SplitAngle.Angle : 3.1415928 ShapeProcess.SplitAngle.MaxTolerance : 0.1 ShapeProcess.SplitAngle.SegmentSurfaceMode : 1 ShapeProcess.SplitClosedFaces.NbSplitPoints : 1 ShapeProcess.SplitClosedFaces.CloseTolerance : 0.05 ShapeProcess.SplitClosedFaces.MaxTolerance : 0.1 ShapeProcess.SplitClosedFaces.SegmentSurfaceMode : 1 ShapeProcess.FixFaceSize.Tolerance : 0.05 ShapeProcess.DropSmallEdges.Tolerance3d : 0.05 ShapeProcess.DropSmallSolids.WidthFactorThreshold : 1 ShapeProcess.DropSmallSolids.VolumeThreshold : 1000 ShapeProcess.DropSmallSolids.MergeSolids : 1 ShapeProcess.BSplineRestriction.SurfaceMode : 1 ShapeProcess.BSplineRestriction.Curve3dMode : 1 ShapeProcess.BSplineRestriction.Curve2dMode : 1 ShapeProcess.BSplineRestriction.OffsetSurfaceMode : 1 ShapeProcess.BSplineRestriction.OffsetCurve3dMode : 1 ShapeProcess.BSplineRestriction.OffsetCurve2dMode : 1 ShapeProcess.BSplineRestriction.LinearExtrusionMode : 1 ShapeProcess.BSplineRestriction.RevolutionMode : 1 ShapeProcess.BSplineRestriction.Tolerance3d : 1e-3 ShapeProcess.BSplineRestriction.Tolerance2d : 1e-5 ShapeProcess.BSplineRestriction.Continuity3d : C1 ShapeProcess.BSplineRestriction.Continuity2d : C1 ShapeProcess.BSplineRestriction.RequiredDegree : 15 ShapeProcess.BSplineRestriction.RequiredNbSegments : 100 ShapeProcess.BSplineRestriction.PreferDegree : 1 ShapeProcess.BSplineRestriction.RationalToPolynomial : 1 ShapeProcess.BSplineRestriction.MaxDegree : 15 ShapeProcess.BSplineRestriction.MaxNbSegments : 10000 ShapeProcess.BSplineRestriction.SegmentSurfaceMode : 1 ShapeProcess.BSplineRestriction.ConvCurve3dMode : 0 ShapeProcess.BSplineRestriction.ConvCurve2dMode : 0 ShapeProcess.BSplineRestriction.PlaneMode : 0 ShapeProcess.BSplineRestriction.BezierMode : 0 ShapeProcess.SplitContinuity.Tolerance3d :1.e-3 ShapeProcess.SplitContinuity.SurfaceContinuity :C0 ShapeProcess.SplitContinuity.CurveContinuity :C1 ShapeProcess.ToBezier.EdgeMode : 0 ShapeProcess.ToBezier.SurfaceMode : 0 ShapeProcess.ToBezier.PlaneMode : 1 ShapeProcess.ToBezier.RevolutionMode : 1 ShapeProcess.ToBezier.ExtrusionMode : 1 ShapeProcess.ToBezier.BSplineMode : 1 ShapeProcess.ToBezier.Curve3dMode : 1 ShapeProcess.ToBezier.Curve2dMode : 1 ShapeProcess.ToBezier.Line3dMode : 1 ShapeProcess.ToBezier.Circle3dMode : 1 ShapeProcess.ToBezier.Conic3dMode : 1 ShapeProcess.ToBezier.MaxTolerance : 0.1 ShapeProcess.ToBezier.SegmentSurfaceMode : 1 ShapeProcess.ToBezier.MinCurveLength : 0.05 ShapeProcess.FixShape.Tolerance3d : 1.e-7 ShapeProcess.FixShape.MaxTolerance3d : 1 ShapeProcess.FixShape.MinTolerance3d : 1.e-7 ShapeProcess.FixShape.FixFreeShellMode : -1 ShapeProcess.FixShape.FixFreeFaceMode : -1 ShapeProcess.FixShape.FixFreeWireMode : -1 ShapeProcess.FixShape.FixSameParameterMode : -1 ShapeProcess.FixShape.FixSolidMode : -1 ShapeProcess.FixShape.FixShellMode : -1 ShapeProcess.FixShape.FixFaceMode : -1 ShapeProcess.FixShape.FixWireMode : -1 ShapeProcess.FixShape.FixOrientationMode : -1 ShapeProcess.FixShape.FixMissingSeamMode : -1 ShapeProcess.FixShape.FixSmallAreaWireMode : -1 ShapeProcess.FixShape.ModifyTopologyMode : 0 ShapeProcess.FixShape.ModifyGeometryMode : 1 ShapeProcess.FixShape.ClosedWireMode : 1 ShapeProcess.FixShape.PreferencePCurveMode : 1 ShapeProcess.FixShape.FixReorderMode : -1 ShapeProcess.FixShape.FixSmallMode : -1 ShapeProcess.FixShape.FixConnectedMode : -1 ShapeProcess.FixShape.FixEdgeCurvesMode : -1 ShapeProcess.FixShape.FixDegeneratedMode : -1 ShapeProcess.FixShape.FixLackingMode : -1 ShapeProcess.FixShape.FixSelfIntersectionMode : -1 ShapeProcess.FixShape.FixReversed2dMode : -1 ShapeProcess.FixShape.FixRemovePCurveMode : -1 ShapeProcess.FixShape.FixRemoveCurve3dMode : -1 ShapeProcess.FixShape.FixAddPCurveMode : -1 ShapeProcess.FixShape.FixAddCurve3dMode : -1 ShapeProcess.FixShape.FixSeamMode : -1 ShapeProcess.FixShape.FixShiftedMode : -1 ShapeProcess.FixShape.FixEdgeSameParameterMode : 0 ShapeProcess.FixShape.FixSelfIntersectingEdgeMode : -1 ShapeProcess.FixShape.FixIntersectingEdgesMode : -1 ShapeProcess.FixShape.FixNonAdjacentIntersectingEdgesMode : -1 ShapeProcess.FixShape.FixIntersectingWiresMode : -1 ShapeProcess.FixShape.FixLoopWiresMode : -1 ShapeProcess.FixShape.CreateOpenSolidMode :0 ShapeProcess.SameParameter.Force : 0 ShapeProcess.SameParameter.Tolerance3d : 1.e-7 !=========================================================================== ! Description of parameters for Operations !=========================================================================== ! .MaxTolerance : Maximal tolerance for comparing curves, points which is ! used by splitting tools. The tools that are used this ! parameter are the following: SplitAngle, SplitClosedFaces, ! ToBezier. This value should be the same for all tools in ! one sequence. To redefine default value uncomment ! appropriate line in each operator. ! .SegmentSurfaceMode : Mode for limiting surface by UV boundaries of face that ! is based on this surface. If flag is 1 the surface is ! limited. This mode is used by splitting tools (SplitAngle, ! SplitClosedFaces, ToBezier). This value should be the same ! for all tools in one sequence. To redefine default value ! uncomment appropriate line in each operator. ! BSplineRestriction : Approximation of general B-Spline and Bezier with particular B-Spline ! BSplineRestriction.ConvCurve3dMode : Mode of conversion of any 3D curve to BSpline and approximation, ! BSplineRestriction.ConvCurve2dMode : Mode of conversion of any 2D curve to BSpline and approximation, ! BSplineRestriction.PlaneMode : Mode of conversion of Geom_Plane to BSpline surface, ! BSplineRestriction.BezierMode : Mode of conversion of Besier surface to BSpline and approximation, ! BSplineRestriction.SurfaceMode : Mode of approximation of surfaces if restriction is necessary, yes/no ! BSplineRestriction.Curve3dMode : Mode of approximation of 3D curves if restriction is necessary, yes/no ! BSplineRestriction.Curve2dMode : Mode of approximation of 2D curves if restriction is necessary, yes/no ! BSplineRestriction.OffsetSurfaceMode : Mode of conversion of offset surfaces to BSpline surface, yes/no ! : Yes - surface is converted to BSpline surface ! : No - basis surface is processed but offset surface is kept. ! : This mode acts if BSplineRestriction.SurfaceMode is yes. ! BSplineRestriction.LinearExtrusionMode: Mode of conversion of linear extrusion surfaces to BSpline surface, yes/no ! : Yes - surface is converted to BSpline surface ! : No - basis curve is processed but extrusion surface is kept. ! : This mode acts if BSplineRestriction.SurfaceMode is yes. ! BSplineRestriction.RevolutionMode : Mode of conversion surfaces of revolution to BSpline surface, yes/no ! : Yes - surface is converted to BSpline surface ! : No - basis curve is processed but revolution surface is kept. ! : This mode acts if BSplineRestriction.SurfaceMode is yes. ! BSplineRestriction.OffsetCurve3dMode : Mode of conversion of 3d offset curves to BSpline curves, yes/no ! : Yes - curve is converted to BSpline curve ! : No - basis curve is processed but offset curve is kept. ! : This mode acts if BSplineRestriction.Curve3dMode is yes. ! BSplineRestriction.OffsetCurve2dMode : Mode of conversion of 2d offset curves to BSpline curves, yes/no ! : Yes - curve is converted to BSpline curve ! : No - basis curve is processed but offset curve is kept. ! : This mode acts if BSplineRestriction.Curve2dMode is yes. ! BSplineRestriction.Tolerance3d : Tolerance of 3D approximation ! BSplineRestriction.Tolerance2d : Tolerance of 2D approximation ! BSplineRestriction.Continuity3d : Required continuity of 3D geometry ! BSplineRestriction.Continuity2d : Required continuity of 2D geometry ! BSplineRestriction.RequiredDegree : Required degree of B-Spline ! BSplineRestriction.RequiredNbSegments : Required maximum number of segments of B-Spline ! BSplineRestriction.PreferDegree : Preference between requirement to degree and maximum number of segments, true/false ! BSplineRestriction.RationalToPolynomial: Mode of conversion of rational B-Spline to polynomial, yes/no ! BSplineRestriction.MaxDegree : Maximum allowed degree of B-Spline ! BSplineRestriction.MaxNbSegments : Maximum allowed number of segments in a B-Spline ! DirectFaces : Conversion of elementary surface in left-handed coordinate system into right-handed ! no parameters ! ElementaryToRevolution : Conversion of elementary revolutive surface into general surface of revolution ! no parameters ! SameParameter : Conversion of edge to be SameRange and SameParameter ! SameParameter.Force : Mode of forced invoking, true/false ! SameParameter.Tolerance3d : 3D tolerance ! SplitAngle : Split revolutive surface (elementary and general) into several surfaces ! SplitAngle.Angle : Maximum angle of revolution, radian ! SplitClosedFaces : Split faces that have seam-edge or geometrically closed on closed surface. ! SplitClosedFaces.NbSplitPoints : Number of cuttings (number of resulting faces will be NbSplitPoints+1) ! SplitClosedFaces.CloseTolerance : Precision to define geometric closure. ! SplitContinuity : Correction or split shapes to have speicified continuity ! SplitContinuity.Tolerance3d : 3D tolerance for correction of geometry ! SplitContinuity.SurfaceContinuity : Required continuity for surfaces ! SplitContinuity.CurveContinuity : Required continuity for curves ! ToBezier : Conversion of geometry into Bezier ! ToBezier.SurfaceMode : Mode of conversion of surfaces, yes/no ! ToBezier.PlaneMode : Mode of conversion of Planes,yes/no. This mode acts if SurfaceMode is yes. ! ToBezier.RevolutionMode : Mode of conversion of Surfaces of Revolution (generatrix to bezier), yes/no. ! This mode acts if SurfaceMode is yes. ! ToBezier.ExtrusionMode : Mode of conversion of Surfaces of Extrusion (whole surface not only generatrix), yes/no. ! This mode acts if SurfaceMode is yes. ! ToBezier.BSplineMode : Mode of conversion of BSpline Surfaces, yes/no. This mode acts if SurfaceMode is yes. ! ToBezier.EdgeMode : Mode of translation edges (0- Free,1 - Shared,2- Both) ! : .Default - Free. Acts on translation curves 3d . | : If it is 0 (Free) that only free edges are taken into ! : account for translation 3d curves, ! : if it is 1 (Shared) that only shared edges are taken into ! : account for translation 3d curves, ! : if it is 2 (Both) that all edges are taken into ! : account for translation 3d curves, ! ToBezier.Curve3dMode : Mode of conversion 3D curves, yes/no ! ToBezier.Curve2dMode : Mode of conversion 2D curves, yes/no ! ToBezier.Line3dMode : Mode of conversion 3D lines, yes/no ! ToBezier.Circle3dMode : Mode of conversion 3D circles, yes/no ! ToBezier.Conic3dMode : Mode of conversion 3D conics, yes/no ! ToBezier.MinCurveLength : Min length of created curves 3d.( default 0.05) ! FixFaceSize : Removing small faces ! FixFaceSize.Tolerance : Tolerance in 3d ! DropSmallEdges : Eliminate small edges by removing or merging with neighbour ! DropSmallEdges.Tolerance3d : Tolerance (3d) ! DropSmallSolids : Eliminate small solids by a) removing them or b) absorbing them by adjacent larger solids. ! DropSmallSolids.WidthFactorThreshold : Maximum value of 2V/S of a solid where V is volume and S is surface area of the solid. ! DropSmallSolids.VolumeThreshold : Maximum volume of a solid. ! DropSmallSolids.MergeSolids : If false, solids are removed; otherwise, solids are merged to adjacent larger solids. ! FixShape.Tolerance3d : Tolerance (3d) for fixing of shape. ! FixShape.MaxTolerance3d : Maximal possible value of increasing of tolerance during fixing. ! FixShape.MinTolerance3d : Minimal value of tolerance. ! FixShape.FixFreeShellMode : Mode for fixing free shells in the shape (default - -1, yes - 1 , no - 0). ! FixShape.FixFreeFaceMode : Mode for fixing free faces in the shape (default - -1, yes - 1 , no - 0). ! FixShape.FixFreeWireMode : Mode for fixing free wires in the shape (default - -1, yes - 1 , no - 0). ! FixShape.FixSameParameterMode : Mode for fixing same parameter on the whole shape (default - -1, yes - 1 , no - 0). ! FixShape.FixSolidMode : Mode for fixing solids (default - -1, yes - 1 , no - 0). ! FixShape.FixShellMode : Mode for fixing shells (default - -1, yes - 1 , no - 0). ! FixShape.FixFaceMode : Mode for fixing faces (default - -1, yes - 1 , no - 0). ! FixShape.FixWireMode : Mode for fixing wires (default - -1, yes - 1 , no - 0). ! FixShape.FixOrientationMode : Mode for fixing face orientation (default - -1, yes - 1 , no - 0). ! FixShape.FixMissingSeamMode : Mode for fixing face missing seam (default - -1, yes - 1 , no - 0). ! FixShape.FixSmallAreaWireMode : Mode for fixing small area wires (default - -1, yes - 1 , no - 0). ! FixShape.ModifyTopologyMode : Mode allowing for modifying of topology (default - 0, yes - 1 , no - 0). ! FixShape.ModifyGeometryMode : Mode allowing for modifying of geometry (default - 1, yes - 1 , no - 0). ! FixShape.ClosedWireMode : Mode defining whether the wire is to be closed. (default - 1, yes - 1 , no - 0). ! FixShape.PreferencePCurveMode : Mode defining of preference of 2d representation (default - 1, yes - 1 , no - 0). ! FixShape.FixReorderMode : Mode for fixing of order of the edges in the wire (default - -1, yes - 1 , no - 0). ! FixShape.FixSmallMode : Mode for removing of the small edges from the wire in the case when ! : ModifyTopologyMode equaled "yes" (default - -1, yes - 1 , no - 0). ! FixShape.FixConnectedMode : Mode for fixing of connecting of edges in the wire(default - -1, yes - 1 , no - 0). ! FixShape.FixEdgeCurvesMode : Moge for fixing each edge from the wire (default - -1, yes - 1 , no - 0). ! FixShape.FixDegeneratedMode : Moge for fixing cases of degenerate pcurve (default - -1, yes - 1 , no - 0). ! FixShape.FixLackingMode : Moge for fixing cases of lacking edge (default - -1, yes - 1 , no - 0). ! FixShape.FixSelfIntersectionMode : Mode for fixing of cases self-intersection of wire (default - -1, yes - 1 , no - 0). ! FixShape.FixReversed2dMode : Mode for fixing cases when pcurve is opposite curve3d (default - -1, yes - 1 , no - 0). ! FixShape.FixRemovePCurveMode : Mode for removing of pcurves from edges (default - -1, yes - 1 , no - 0). ! FixShape.FixRemoveCurve3dMode : Mode for removing of 3d curves from edges (default - -1, yes - 1 , no - 0). ! FixShape.FixAddPCurveMode : Mode for adding pcurves of the edges if missing (default - -1, yes - 1 , no - 0). ! FixShape.FixAddCurve3dMode : Mode for adding curves 3d of the edges if missing (default - -1, yes - 1 , no - 0). ! FixShape.FixSeamMode : Mode for fixing cases of seam edges. ! FixShape.FixShiftedMode : Mode for fixing cases when pcurves can be shifted on period on the closed surface ! (default - -1, yes - 1 , no - 0). ! FixShape.FixEdgeSameParameterMode : Mode for fixing same parameter for each edge (default - -1, yes - 1 , no - 0). ! FixShape.FixSelfIntersectingEdgeMode : Mode for fixing cases self-intrsection edge (default - -1, yes - 1 , no - 0). ! FixShape.FixIntersectingEdgesMode : Mode for fixing intersection adjacent edges. ! FixShape.FixNonAdjacentIntersectingEdgesMode : Mode for fixing intersection non-adjacent edges. !