1 ## Copyright (C) 2014-2017 CEA/DEN, EDF R&D
3 ## This library is free software; you can redistribute it and/or
4 ## modify it under the terms of the GNU Lesser General Public
5 ## License as published by the Free Software Foundation; either
6 ## version 2.1 of the License, or (at your option) any later version.
8 ## This library is distributed in the hope that it will be useful,
9 ## but WITHOUT ANY WARRANTY; without even the implied warranty of
10 ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
11 ## Lesser General Public License for more details.
13 ## You should have received a copy of the GNU Lesser General Public
14 ## License along with this library; if not, write to the Free Software
15 ## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
17 ## See http:##www.salome-platform.org/ or
18 ## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
22 #[step] Click 'Create sketch' toolbar button
23 #[step] Select XY plane for sketching
24 #[step] Sketch - Point
25 #[step] Create point via clicking inside viewer
26 point_create_in_view((329, 255))
27 #[step] Check 'Auxiliary' check-box
28 #[step] Create point via clicking inside viewer
29 point_create_in_view((429, 300), 1)
30 #[step] Finish creation of points via viewer
31 #[step] Create point via direct input of coordinates. Use coordinates (50, 60)
32 point_create((50, 60))
33 #[step] Check 'Auxiliary' check-box
34 #[step] Create point via direct input of coordinates. Use coordinates (150, 60)
35 point_create((150, 60), 1)
36 #[step] Finish creation of points
38 #[step] Create line via direct input of coordinates. Use coordinates (0, 0) for start point and (100, 100) - for end point
39 line_create((0,0), (100, 100))
40 #[step] Check 'Auxiliary' check-box
41 #[step] Create line via direct input of coordinates. Use coordinates (100, 100) for start point and (100, 100) - for end point
42 line_create((100, 100), (200, 200), 1)
43 #[step] Create line via clicking inside viewer
44 line_create_in_view((400, 200), (600, 150))
45 #[step] Check 'Auxiliary' check-box
46 #[step] Create line via clicking inside viewer
47 line_create_in_view((600, 150), (500, 450), 1)
48 #[step] Finish creation of lines
49 #[step] Sketch - Circle
50 #[step] Create circle via direct input of coordinates. Use coordinates (0, 0) for center and 200 - for radius
51 circle_create((0, 0), 200)
52 #[step] Check 'Auxiliary' check-box
53 #[step] Create circle via direct input of coordinates. Use coordinates (0, 0) for center and 300 - for radius
54 circle_create((0, 0), 300, 1)
55 #[step] Create circle via clicking inside viewer
56 circle_create_in_view((400, 200), (260, 0))
57 #[step] Check 'Auxiliary' check-box
58 #[step] Create circle via clicking inside viewer
59 circle_create_in_view((400, 200), (300, 100), 1)
60 #[step] Finish creation of circles
62 #[step] Create arc via direct input of coordinates. Use coordinates (0, 0) for center, (100, 50) - for start point and (80, 90) - for end point
63 arc_create((0, 0), (100, 50), (80, 90))
64 #[step] Check 'Auxiliary' check-box
65 #[step] Create arc via direct input of coordinates. Use coordinates (0, 0) for center, (200, 50) - for start point and (80, 90) - for end point
66 arc_create((0, 0), (200, 50), (80, 90), 1)
67 #[step] Create arc via clicking inside viewer
68 arc_create_in_view((218, 183), (102, 135), (128, 271))
69 #[step] Check 'Auxiliary' check-box
70 #[step] Create arc via clicking inside viewer
71 arc_create_in_view((203, 185), (51, 134), (104, 282), 1)
72 #[step] CLick 'Fit all' button
73 clickButton(waitForObject(":SALOME*.Fit All_QToolButton"))
74 #[check] All objects have been created. Check that objects of both types are shown (main and auxiliary)
76 #[step] Finish sketching
80 source(findFile("scripts", "common.py"))
83 # [Scenario] Sketch_001
84 #[Topic] Creation of objects in sketch
85 #[Tested functionality] Creation of objects during sketching by 2 ways: direct input of coordinates and clicking in viewer. Creation of auxiliary objects
86 #[Summary description]
89 #[section] Application start
91 startApplication("salome_run.sh")
95 #[step] Activate SHAPER
96 #[step]Click 'New' button
99 #[section] Creation of sketch and objects inside it
100 #[step] Part - New part
102 # clickButton(waitForObject(":Arc.Auxiliary_QCheckBox"))
104 sketch_create(help_points("XY_plane"), lambda: sketch())
105 #[check] Check that only main objects are shown
107 #[step] Close application without saving
108 close_application_wo_saving()