1 # Copyright (C) 2014-2021 CEA/DEN, EDF R&D
3 # This library is free software; you can redistribute it and/or
4 # modify it under the terms of the GNU Lesser General Public
5 # License as published by the Free Software Foundation; either
6 # version 2.1 of the License, or (at your option) any later version.
8 # This library is distributed in the hope that it will be useful,
9 # but WITHOUT ANY WARRANTY; without even the implied warranty of
10 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
11 # Lesser General Public License for more details.
13 # You should have received a copy of the GNU Lesser General Public
14 # License along with this library; if not, write to the Free Software
15 # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
17 # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
20 # A quick introduction to implementing scripts for BDD tests:
22 # This file contains snippets of script code to be executed as the .feature
23 # file is processed. See the section 'Behaviour Driven Testing' in the 'API
24 # Reference Manual' chapter of the Squish manual for a comprehensive reference.
26 # The decorators Given/When/Then/Step can be used to associate a script snippet
27 # with a pattern which is matched against the steps being executed. Optional
28 # table/multi-line string arguments of the step are passed via a mandatory
29 # 'context' parameter:
31 # @When("I enter the text")
32 # def whenTextEntered(context):
35 # The pattern is a plain string without the leading keyword, but a couple of
36 # placeholders including |any|, |word| and |integer| are supported which can be
37 # used to extract arbitrary, alphanumeric and integer values resp. from the
38 # pattern; the extracted values are passed as additional arguments:
40 # @Then("I get |integer| different names")
41 # def namesReceived(context, numNames):
44 # Instead of using a string with placeholders, a regular expression can be
45 # specified. In that case, make sure to set the (optional) 'regexp' argument
50 @Given("Launch application in salome mode")
52 startApplication("salome_run.sh")
53 clickButton(waitForObject(":SALOME*.Shaper_QToolButton"))
54 clickButton(waitForObject(":Activate module.New_QPushButton"))
56 @When("Create parameter a=30")
58 activateItem(waitForObjectItem(":SALOME*_QMenuBar", "Part"))
59 activateItem(waitForObjectItem(":Part_QMenu", "Parameter"))
60 mouseClick(waitForObject(":Parameter_QLineEdit"), 10, 10, 0, Qt.LeftButton)
61 type(waitForObject(":Parameter_QLineEdit"), "a")
62 mouseClick(waitForObject(":Parameter_ExpressionEditor"), 10, 10, 0, Qt.LeftButton)
63 type(waitForObject(":Parameter_ExpressionEditor"), "30")
64 clickButton(waitForObject(":Boolean.property_panel_ok_QToolButton"))
68 activateItem(waitForObjectItem(":SALOME*_QMenuBar", "Part"))
69 activateItem(waitForObjectItem(":Part_QMenu", "New part"))
71 @When("Create parameter a=a+2")
73 activateItem(waitForObjectItem(":SALOME*_QMenuBar", "Part"))
74 activateItem(waitForObjectItem(":Part_QMenu", "Parameter"))
75 mouseClick(waitForObject(":Parameter_QLineEdit"), 10, 10, 0, Qt.LeftButton)
76 type(waitForObject(":Parameter_QLineEdit"), "a")
77 mouseClick(waitForObject(":Parameter_ExpressionEditor"), 10, 10, 0, Qt.LeftButton)
78 type(waitForObject(":Parameter_ExpressionEditor"), "a+2")
79 clickButton(waitForObject(":Boolean.property_panel_ok_QToolButton"))
81 @Then("the parameter in the part should exist")
83 waitForObjectItem(":Object browser_XGUI_DataTree", "Part\\_1.Parameters (1)")
84 clickItem(":Object browser_XGUI_DataTree", "Part\\_1.Parameters (1)", -10, 10, 0, Qt.LeftButton)
85 waitFor("object.exists(':Parameters (1).a = 32_QModelIndex')", 20000)
86 test.compare(findObject(":Parameters (1).a = 32_QModelIndex").text, "a = 32")
88 @When("Create sketch")
90 clickButton(waitForObject(":SALOME*.Sketch_QToolButton"))
91 clickButton(waitForObject(":SALOME*.-OZ_QToolButton"))
92 mouseClick(waitForObject(":SALOME*.3D View Operations_OCCViewer_ViewPort3d"), 247, 126, 0, Qt.LeftButton)
93 clickButton(waitForObject(":Sketcher plane.Set plane view_QPushButton"))
95 @Then("Check that Point does not allow using expressions")
97 activateItem(waitForObjectItem(":SALOME*_QMenuBar", "Sketch"))
98 activateItem(waitForObjectItem(":Sketch_QMenu", "Point"))
99 mouseClick(waitForObject(":Point.qt_spinbox_lineedit_QLineEdit"), 41, 6, 0, Qt.LeftButton)
100 type(waitForObject(":Point.X _ModuleBase_ParamSpinBox"), "<Ctrl+A>")
101 type(waitForObject(":Point.X _ModuleBase_ParamSpinBox"), "a")
102 mouseClick(waitForObject(":Point.qt_spinbox_lineedit_QLineEdit_2"), 40, 9, 0, Qt.LeftButton)
103 type(waitForObject(":Point.Y _ModuleBase_ParamSpinBox"), "<Ctrl+A>")
104 type(waitForObject(":Point.Y _ModuleBase_ParamSpinBox"), "a")
105 waitFor("object.exists(':Point.qt_spinbox_lineedit_QLineEdit')", 20000)
106 test.compare(str(findObject(":Point.qt_spinbox_lineedit_QLineEdit").text), "0")
107 waitFor("object.exists(':Point.qt_spinbox_lineedit_QLineEdit_2')", 20000)
108 test.compare(str(findObject(":Point.qt_spinbox_lineedit_QLineEdit_2").text), "0")
109 clickButton(waitForObject(":Point.property_panel_cancel_QToolButton"))
111 @Then("Check that Line does not allow using expressions")
113 clickButton(waitForObject(":SALOME*.Line_QToolButton"))
114 mouseClick(waitForObject(":Start point.qt_spinbox_lineedit_QLineEdit_2"), 89, 9, 0, Qt.LeftButton)
115 type(waitForObject(":Start point.X _ModuleBase_ParamSpinBox"), "<Ctrl+A>")
116 type(waitForObject(":Start point.X _ModuleBase_ParamSpinBox"), "a")
117 mouseClick(waitForObject(":Start point.qt_spinbox_lineedit_QLineEdit_3"), 72, 10, 0, Qt.LeftButton)
118 type(waitForObject(":Start point.Y _ModuleBase_ParamSpinBox"), "<Ctrl+A>")
119 type(waitForObject(":Start point.Y _ModuleBase_ParamSpinBox"), "a")
120 mouseClick(waitForObject(":End point.qt_spinbox_lineedit_QLineEdit_2"), 62, 8, 0, Qt.LeftButton)
121 type(waitForObject(":End point.X _ModuleBase_ParamSpinBox"), "<Ctrl+A>")
122 type(waitForObject(":End point.X _ModuleBase_ParamSpinBox"), "a")
123 mouseClick(waitForObject(":End point.qt_spinbox_lineedit_QLineEdit_3"), 59, 6, 0, Qt.LeftButton)
124 type(waitForObject(":End point.Y _ModuleBase_ParamSpinBox"), "<Ctrl+A>")
125 type(waitForObject(":End point.Y _ModuleBase_ParamSpinBox"), "a")
126 waitFor("object.exists(':Start point.qt_spinbox_lineedit_QLineEdit_2')", 20000)
127 test.compare(str(findObject(":Start point.qt_spinbox_lineedit_QLineEdit_2").text), "0")
128 waitFor("object.exists(':Start point.qt_spinbox_lineedit_QLineEdit_3')", 20000)
129 test.compare(str(findObject(":Start point.qt_spinbox_lineedit_QLineEdit_3").text), "0")
130 waitFor("object.exists(':End point.qt_spinbox_lineedit_QLineEdit_2')", 20000)
131 test.compare(str(findObject(":End point.qt_spinbox_lineedit_QLineEdit_2").text), "0")
132 waitFor("object.exists(':End point.qt_spinbox_lineedit_QLineEdit_3')", 20000)
133 test.compare(str(findObject(":End point.qt_spinbox_lineedit_QLineEdit_3").text), "0")
134 clickButton(waitForObject(":Line.property_panel_cancel_QToolButton"))
136 @Then("Check that Circle does not allow using expressions")
138 activateItem(waitForObjectItem(":SALOME*_QMenuBar", "Sketch"))
139 activateItem(waitForObjectItem(":Sketch_QMenu", "Circle"))
140 mouseClick(waitForObject(":Center.qt_spinbox_lineedit_QLineEdit"), 90, 4, 0, Qt.LeftButton)
141 type(waitForObject(":Center.X _ModuleBase_ParamSpinBox"), "<Ctrl+A>")
142 type(waitForObject(":Center.X _ModuleBase_ParamSpinBox"), "a")
143 mouseClick(waitForObject(":Center.qt_spinbox_lineedit_QLineEdit_2"), 71, 8, 0, Qt.LeftButton)
144 type(waitForObject(":Center.Y _ModuleBase_ParamSpinBox"), "<Ctrl+A>")
145 type(waitForObject(":Center.Y _ModuleBase_ParamSpinBox"), "a")
146 mouseClick(waitForObject(":Circle.qt_spinbox_lineedit_QLineEdit"), 58, 6, 0, Qt.LeftButton)
147 type(waitForObject(":Circle.CircleRadius_ModuleBase_ParamSpinBox"), "<Ctrl+A>")
148 type(waitForObject(":Circle.CircleRadius_ModuleBase_ParamSpinBox"), "a")
149 waitFor("object.exists(':Center.qt_spinbox_lineedit_QLineEdit')", 20000)
150 test.compare(str(findObject(":Center.qt_spinbox_lineedit_QLineEdit").text), "0")
151 waitFor("object.exists(':Center.qt_spinbox_lineedit_QLineEdit_2')", 20000)
152 test.compare(str(findObject(":Center.qt_spinbox_lineedit_QLineEdit_2").text), "0")
153 waitFor("object.exists(':Circle.qt_spinbox_lineedit_QLineEdit')", 20000)
154 test.compare(str(findObject(":Circle.qt_spinbox_lineedit_QLineEdit").text), "0")
155 clickButton(waitForObject(":Circle.property_panel_cancel_QToolButton"))
157 @Then("Check that Arc does not allow using expressions")
159 activateItem(waitForObjectItem(":SALOME*_QMenuBar", "Sketch"))
160 activateItem(waitForObjectItem(":Sketch_QMenu", "Arc"))
161 mouseClick(waitForObject(":Center.qt_spinbox_lineedit_QLineEdit_3"), 156, 6, 0, Qt.LeftButton)
162 type(waitForObject(":Center.X _ModuleBase_ParamSpinBox_2"), "A")
163 type(waitForObject(":Center.X _ModuleBase_ParamSpinBox_2"), "<Ctrl+A>")
164 type(waitForObject(":Center.X _ModuleBase_ParamSpinBox_2"), "a")
165 mouseClick(waitForObject(":Arc.Center_QGroupBox"), 135, 41, 0, Qt.LeftButton)
166 mouseClick(waitForObject(":Center.qt_spinbox_lineedit_QLineEdit_4"), 115, 3, 0, Qt.LeftButton)
167 type(waitForObject(":Center.Y _ModuleBase_ParamSpinBox_2"), "<Ctrl+A>")
168 type(waitForObject(":Center.Y _ModuleBase_ParamSpinBox_2"), "a")
169 mouseClick(waitForObject(":Start point.qt_spinbox_lineedit_QLineEdit_4"), 103, 9, 0, Qt.LeftButton)
170 type(waitForObject(":Start point.X _ModuleBase_ParamSpinBox_2"), "<Ctrl+A>")
171 type(waitForObject(":Start point.X _ModuleBase_ParamSpinBox_2"), "a")
172 mouseClick(waitForObject(":Start point.qt_spinbox_lineedit_QLineEdit_5"), 99, 8, 0, Qt.LeftButton)
173 type(waitForObject(":Start point.Y _ModuleBase_ParamSpinBox_2"), "<Ctrl+A>")
174 type(waitForObject(":Start point.Y _ModuleBase_ParamSpinBox_2"), "a")
175 mouseClick(waitForObject(":End point.qt_spinbox_lineedit_QLineEdit_4"), 99, 1, 0, Qt.LeftButton)
176 type(waitForObject(":End point.X _ModuleBase_ParamSpinBox_2"), "<Ctrl+A>")
177 type(waitForObject(":End point.X _ModuleBase_ParamSpinBox_2"), "a")
178 mouseClick(waitForObject(":End point.qt_spinbox_lineedit_QLineEdit_5"), 99, 1, 0, Qt.LeftButton)
179 type(waitForObject(":End point.Y _ModuleBase_ParamSpinBox_2"), "<Ctrl+A>")
180 type(waitForObject(":End point.Y _ModuleBase_ParamSpinBox_2"), "a")
181 waitFor("object.exists(':Center.qt_spinbox_lineedit_QLineEdit_3')", 20000)
182 test.compare(str(findObject(":Center.qt_spinbox_lineedit_QLineEdit_3").text), "0")
183 waitFor("object.exists(':Center.qt_spinbox_lineedit_QLineEdit_4')", 20000)
184 test.compare(str(findObject(":Center.qt_spinbox_lineedit_QLineEdit_4").text), "0")
185 waitFor("object.exists(':Start point.qt_spinbox_lineedit_QLineEdit_4')", 20000)
186 test.compare(str(findObject(":Start point.qt_spinbox_lineedit_QLineEdit_4").text), "0")
187 waitFor("object.exists(':Start point.qt_spinbox_lineedit_QLineEdit_5')", 20000)
188 test.compare(str(findObject(":Start point.qt_spinbox_lineedit_QLineEdit_5").text), "0")
189 waitFor("object.exists(':End point.qt_spinbox_lineedit_QLineEdit_4')", 20000)
190 test.compare(str(findObject(":End point.qt_spinbox_lineedit_QLineEdit_4").text), "0")
191 waitFor("object.exists(':End point.qt_spinbox_lineedit_QLineEdit_5')", 20000)
192 test.compare(str(findObject(":End point.qt_spinbox_lineedit_QLineEdit_5").text), "0")
193 clickButton(waitForObject(":Arc.property_panel_cancel_QToolButton"))
195 @Then("Check that Fillet does not allow using expressions")
197 activateItem(waitForObjectItem(":SALOME*_QMenuBar", "Sketch"))
198 activateItem(waitForObjectItem(":Sketch_QMenu", "Line"))
199 mouseClick(waitForObject(":SALOME*.3D View Operations_OCCViewer_ViewPort3d"), 131, 282, 0, Qt.LeftButton)
200 mouseClick(waitForObject(":SALOME*.3D View Operations_OCCViewer_ViewPort3d"), 209, 98, 0, Qt.LeftButton)
201 mouseClick(waitForObject(":SALOME*.3D View Operations_OCCViewer_ViewPort3d"), 283, 275, 0, Qt.LeftButton)
202 #TODO_1 clickButton(waitForObject(":Line.property_panel_cancel_QToolButton"))
203 activateItem(waitForObjectItem(":SALOME*_QMenuBar", "Sketch"))
204 activateItem(waitForObjectItem(":Sketch_QMenu", "Fillet"))
205 mouseClick(waitForObject(":SALOME*.3D View Operations_OCCViewer_ViewPort3d"), 211, 99, 0, Qt.LeftButton)
206 type(waitForObject(":Fillet.ConstraintValue_ModuleBase_ParamSpinBox"), "<Ctrl+A>")
207 type(waitForObject(":Fillet.ConstraintValue_ModuleBase_ParamSpinBox"), "<Keypad_1>")
208 type(waitForObject(":Fillet.ConstraintValue_ModuleBase_ParamSpinBox"), "<Keypad_0>")
209 type(waitForObject(":Fillet.ConstraintValue_ModuleBase_ParamSpinBox"), "<Keypad_Enter>")
210 waitFor("object.exists(':Fillet.qt_spinbox_lineedit_QLineEdit')", 20000)
211 test.compare(str(findObject(":Fillet.qt_spinbox_lineedit_QLineEdit").text), "10")
212 mouseClick(waitForObject(":Fillet.qt_spinbox_lineedit_QLineEdit"), 48, 6, 0, Qt.LeftButton)
213 type(waitForObject(":Fillet.ConstraintValue_ModuleBase_ParamSpinBox"), "<Ctrl+A>")
214 type(waitForObject(":Fillet.ConstraintValue_ModuleBase_ParamSpinBox"), "a")
215 waitFor("object.exists(':Fillet.qt_spinbox_lineedit_QLineEdit')", 20000)
216 test.compare(str(findObject(":Fillet.qt_spinbox_lineedit_QLineEdit").text), "10")
217 clickButton(waitForObject(":Fillet.property_panel_cancel_QToolButton"))