1 # -*- coding: utf-8 -*-
3 ## Copyright (C) 2014-2017 CEA/DEN, EDF R&D
5 ## This library is free software; you can redistribute it and/or
6 ## modify it under the terms of the GNU Lesser General Public
7 ## License as published by the Free Software Foundation; either
8 ## version 2.1 of the License, or (at your option) any later version.
10 ## This library is distributed in the hope that it will be useful,
11 ## but WITHOUT ANY WARRANTY; without even the implied warranty of
12 ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
13 ## Lesser General Public License for more details.
15 ## You should have received a copy of the GNU Lesser General Public
16 ## License along with this library; if not, write to the Free Software
17 ## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
19 ## See http:##www.salome-platform.org/ or
20 ## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
23 # A quick introduction to implementing scripts for BDD tests:
25 # This file contains snippets of script code to be executed as the .feature
26 # file is processed. See the section 'Behaviour Driven Testing' in the 'API
27 # Reference Manual' chapter of the Squish manual for a comprehensive reference.
29 # The decorators Given/When/Then/Step can be used to associate a script snippet
30 # with a pattern which is matched against the steps being executed. Optional
31 # table/multi-line string arguments of the step are passed via a mandatory
32 # 'context' parameter:
34 # @When("I enter the text")
35 # def whenTextEntered(context):
38 # The pattern is a plain string without the leading keyword, but a couple of
39 # placeholders including |any|, |word| and |integer| are supported which can be
40 # used to extract arbitrary, alphanumeric and integer values resp. from the
41 # pattern; the extracted values are passed as additional arguments:
43 # @Then("I get |integer| different names")
44 # def namesReceived(context, numNames):
47 # Instead of using a string with placeholders, a regular expression can be
48 # specified. In that case, make sure to set the (optional) 'regexp' argument
53 @Given("Launch application in salome mode")
55 startApplication("salome_run.sh")
56 clickButton(waitForObject(":SALOME*.Shaper_QToolButton"))
57 clickButton(waitForObject(":Activate module.New_QPushButton"))
59 @When("Create parameter a=30")
61 activateItem(waitForObjectItem(":SALOME*_QMenuBar", "Part"))
62 activateItem(waitForObjectItem(":Part_QMenu", "Parameter"))
63 mouseClick(waitForObject(":Parameter_QLineEdit"), 10, 10, 0, Qt.LeftButton)
64 type(waitForObject(":Parameter_QLineEdit"), "a")
65 mouseClick(waitForObject(":Parameter_ExpressionEditor"), 10, 10, 0, Qt.LeftButton)
66 type(waitForObject(":Parameter_ExpressionEditor"), "30")
67 clickButton(waitForObject(":Boolean.property_panel_ok_QToolButton"))
71 activateItem(waitForObjectItem(":SALOME*_QMenuBar", "Part"))
72 activateItem(waitForObjectItem(":Part_QMenu", "New part"))
74 @When("Create parameter a=a+2")
76 activateItem(waitForObjectItem(":SALOME*_QMenuBar", "Part"))
77 activateItem(waitForObjectItem(":Part_QMenu", "Parameter"))
78 mouseClick(waitForObject(":Parameter_QLineEdit"), 10, 10, 0, Qt.LeftButton)
79 type(waitForObject(":Parameter_QLineEdit"), "a")
80 mouseClick(waitForObject(":Parameter_ExpressionEditor"), 10, 10, 0, Qt.LeftButton)
81 type(waitForObject(":Parameter_ExpressionEditor"), "a+2")
82 clickButton(waitForObject(":Boolean.property_panel_ok_QToolButton"))
84 @Then("the parameter in the part should exist")
86 waitForObjectItem(":Object browser_XGUI_DataTree", "Part\\_1.Parameters (1)")
87 clickItem(":Object browser_XGUI_DataTree", "Part\\_1.Parameters (1)", -10, 10, 0, Qt.LeftButton)
88 waitFor("object.exists(':Parameters (1).a = 32_QModelIndex')", 20000)
89 test.compare(findObject(":Parameters (1).a = 32_QModelIndex").text, "a = 32")
91 @When("Create sketch")
93 clickButton(waitForObject(":SALOME*.Sketch_QToolButton"))
94 clickButton(waitForObject(":SALOME*.-OZ_QToolButton"))
95 mouseClick(waitForObject(":SALOME*.3D View Operations_OCCViewer_ViewPort3d"), 247, 126, 0, Qt.LeftButton)
96 clickButton(waitForObject(":Sketcher plane.Set plane view_QPushButton"))
98 @Then("Check that Point does not allow using expressions")
100 activateItem(waitForObjectItem(":SALOME*_QMenuBar", "Sketch"))
101 activateItem(waitForObjectItem(":Sketch_QMenu", "Point"))
102 mouseClick(waitForObject(":Point.qt_spinbox_lineedit_QLineEdit"), 41, 6, 0, Qt.LeftButton)
103 type(waitForObject(":Point.X _ModuleBase_ParamSpinBox"), "<Ctrl+A>")
104 type(waitForObject(":Point.X _ModuleBase_ParamSpinBox"), "a")
105 mouseClick(waitForObject(":Point.qt_spinbox_lineedit_QLineEdit_2"), 40, 9, 0, Qt.LeftButton)
106 type(waitForObject(":Point.Y _ModuleBase_ParamSpinBox"), "<Ctrl+A>")
107 type(waitForObject(":Point.Y _ModuleBase_ParamSpinBox"), "a")
108 waitFor("object.exists(':Point.qt_spinbox_lineedit_QLineEdit')", 20000)
109 test.compare(str(findObject(":Point.qt_spinbox_lineedit_QLineEdit").text), "0")
110 waitFor("object.exists(':Point.qt_spinbox_lineedit_QLineEdit_2')", 20000)
111 test.compare(str(findObject(":Point.qt_spinbox_lineedit_QLineEdit_2").text), "0")
112 clickButton(waitForObject(":Point.property_panel_cancel_QToolButton"))
114 @Then("Check that Line does not allow using expressions")
116 clickButton(waitForObject(":SALOME*.Line_QToolButton"))
117 mouseClick(waitForObject(":Start point.qt_spinbox_lineedit_QLineEdit_2"), 89, 9, 0, Qt.LeftButton)
118 type(waitForObject(":Start point.X _ModuleBase_ParamSpinBox"), "<Ctrl+A>")
119 type(waitForObject(":Start point.X _ModuleBase_ParamSpinBox"), "a")
120 mouseClick(waitForObject(":Start point.qt_spinbox_lineedit_QLineEdit_3"), 72, 10, 0, Qt.LeftButton)
121 type(waitForObject(":Start point.Y _ModuleBase_ParamSpinBox"), "<Ctrl+A>")
122 type(waitForObject(":Start point.Y _ModuleBase_ParamSpinBox"), "a")
123 mouseClick(waitForObject(":End point.qt_spinbox_lineedit_QLineEdit_2"), 62, 8, 0, Qt.LeftButton)
124 type(waitForObject(":End point.X _ModuleBase_ParamSpinBox"), "<Ctrl+A>")
125 type(waitForObject(":End point.X _ModuleBase_ParamSpinBox"), "a")
126 mouseClick(waitForObject(":End point.qt_spinbox_lineedit_QLineEdit_3"), 59, 6, 0, Qt.LeftButton)
127 type(waitForObject(":End point.Y _ModuleBase_ParamSpinBox"), "<Ctrl+A>")
128 type(waitForObject(":End point.Y _ModuleBase_ParamSpinBox"), "a")
129 waitFor("object.exists(':Start point.qt_spinbox_lineedit_QLineEdit_2')", 20000)
130 test.compare(str(findObject(":Start point.qt_spinbox_lineedit_QLineEdit_2").text), "0")
131 waitFor("object.exists(':Start point.qt_spinbox_lineedit_QLineEdit_3')", 20000)
132 test.compare(str(findObject(":Start point.qt_spinbox_lineedit_QLineEdit_3").text), "0")
133 waitFor("object.exists(':End point.qt_spinbox_lineedit_QLineEdit_2')", 20000)
134 test.compare(str(findObject(":End point.qt_spinbox_lineedit_QLineEdit_2").text), "0")
135 waitFor("object.exists(':End point.qt_spinbox_lineedit_QLineEdit_3')", 20000)
136 test.compare(str(findObject(":End point.qt_spinbox_lineedit_QLineEdit_3").text), "0")
137 clickButton(waitForObject(":Line.property_panel_cancel_QToolButton"))
139 @Then("Check that Circle does not allow using expressions")
141 activateItem(waitForObjectItem(":SALOME*_QMenuBar", "Sketch"))
142 activateItem(waitForObjectItem(":Sketch_QMenu", "Circle"))
143 mouseClick(waitForObject(":Center.qt_spinbox_lineedit_QLineEdit"), 90, 4, 0, Qt.LeftButton)
144 type(waitForObject(":Center.X _ModuleBase_ParamSpinBox"), "<Ctrl+A>")
145 type(waitForObject(":Center.X _ModuleBase_ParamSpinBox"), "a")
146 mouseClick(waitForObject(":Center.qt_spinbox_lineedit_QLineEdit_2"), 71, 8, 0, Qt.LeftButton)
147 type(waitForObject(":Center.Y _ModuleBase_ParamSpinBox"), "<Ctrl+A>")
148 type(waitForObject(":Center.Y _ModuleBase_ParamSpinBox"), "a")
149 mouseClick(waitForObject(":Circle.qt_spinbox_lineedit_QLineEdit"), 58, 6, 0, Qt.LeftButton)
150 type(waitForObject(":Circle.CircleRadius_ModuleBase_ParamSpinBox"), "<Ctrl+A>")
151 type(waitForObject(":Circle.CircleRadius_ModuleBase_ParamSpinBox"), "a")
152 waitFor("object.exists(':Center.qt_spinbox_lineedit_QLineEdit')", 20000)
153 test.compare(str(findObject(":Center.qt_spinbox_lineedit_QLineEdit").text), "0")
154 waitFor("object.exists(':Center.qt_spinbox_lineedit_QLineEdit_2')", 20000)
155 test.compare(str(findObject(":Center.qt_spinbox_lineedit_QLineEdit_2").text), "0")
156 waitFor("object.exists(':Circle.qt_spinbox_lineedit_QLineEdit')", 20000)
157 test.compare(str(findObject(":Circle.qt_spinbox_lineedit_QLineEdit").text), "0")
158 clickButton(waitForObject(":Circle.property_panel_cancel_QToolButton"))
160 @Then("Check that Arc does not allow using expressions")
162 activateItem(waitForObjectItem(":SALOME*_QMenuBar", "Sketch"))
163 activateItem(waitForObjectItem(":Sketch_QMenu", "Arc"))
164 mouseClick(waitForObject(":Center.qt_spinbox_lineedit_QLineEdit_3"), 156, 6, 0, Qt.LeftButton)
165 type(waitForObject(":Center.X _ModuleBase_ParamSpinBox_2"), "A")
166 type(waitForObject(":Center.X _ModuleBase_ParamSpinBox_2"), "<Ctrl+A>")
167 type(waitForObject(":Center.X _ModuleBase_ParamSpinBox_2"), "a")
168 mouseClick(waitForObject(":Arc.Center_QGroupBox"), 135, 41, 0, Qt.LeftButton)
169 mouseClick(waitForObject(":Center.qt_spinbox_lineedit_QLineEdit_4"), 115, 3, 0, Qt.LeftButton)
170 type(waitForObject(":Center.Y _ModuleBase_ParamSpinBox_2"), "<Ctrl+A>")
171 type(waitForObject(":Center.Y _ModuleBase_ParamSpinBox_2"), "a")
172 mouseClick(waitForObject(":Start point.qt_spinbox_lineedit_QLineEdit_4"), 103, 9, 0, Qt.LeftButton)
173 type(waitForObject(":Start point.X _ModuleBase_ParamSpinBox_2"), "<Ctrl+A>")
174 type(waitForObject(":Start point.X _ModuleBase_ParamSpinBox_2"), "a")
175 mouseClick(waitForObject(":Start point.qt_spinbox_lineedit_QLineEdit_5"), 99, 8, 0, Qt.LeftButton)
176 type(waitForObject(":Start point.Y _ModuleBase_ParamSpinBox_2"), "<Ctrl+A>")
177 type(waitForObject(":Start point.Y _ModuleBase_ParamSpinBox_2"), "a")
178 mouseClick(waitForObject(":End point.qt_spinbox_lineedit_QLineEdit_4"), 99, 1, 0, Qt.LeftButton)
179 type(waitForObject(":End point.X _ModuleBase_ParamSpinBox_2"), "<Ctrl+A>")
180 type(waitForObject(":End point.X _ModuleBase_ParamSpinBox_2"), "a")
181 mouseClick(waitForObject(":End point.qt_spinbox_lineedit_QLineEdit_5"), 99, 1, 0, Qt.LeftButton)
182 type(waitForObject(":End point.Y _ModuleBase_ParamSpinBox_2"), "<Ctrl+A>")
183 type(waitForObject(":End point.Y _ModuleBase_ParamSpinBox_2"), "a")
184 waitFor("object.exists(':Center.qt_spinbox_lineedit_QLineEdit_3')", 20000)
185 test.compare(str(findObject(":Center.qt_spinbox_lineedit_QLineEdit_3").text), "0")
186 waitFor("object.exists(':Center.qt_spinbox_lineedit_QLineEdit_4')", 20000)
187 test.compare(str(findObject(":Center.qt_spinbox_lineedit_QLineEdit_4").text), "0")
188 waitFor("object.exists(':Start point.qt_spinbox_lineedit_QLineEdit_4')", 20000)
189 test.compare(str(findObject(":Start point.qt_spinbox_lineedit_QLineEdit_4").text), "0")
190 waitFor("object.exists(':Start point.qt_spinbox_lineedit_QLineEdit_5')", 20000)
191 test.compare(str(findObject(":Start point.qt_spinbox_lineedit_QLineEdit_5").text), "0")
192 waitFor("object.exists(':End point.qt_spinbox_lineedit_QLineEdit_4')", 20000)
193 test.compare(str(findObject(":End point.qt_spinbox_lineedit_QLineEdit_4").text), "0")
194 waitFor("object.exists(':End point.qt_spinbox_lineedit_QLineEdit_5')", 20000)
195 test.compare(str(findObject(":End point.qt_spinbox_lineedit_QLineEdit_5").text), "0")
196 clickButton(waitForObject(":Arc.property_panel_cancel_QToolButton"))
198 @Then("Check that Fillet does not allow using expressions")
200 activateItem(waitForObjectItem(":SALOME*_QMenuBar", "Sketch"))
201 activateItem(waitForObjectItem(":Sketch_QMenu", "Line"))
202 mouseClick(waitForObject(":SALOME*.3D View Operations_OCCViewer_ViewPort3d"), 131, 282, 0, Qt.LeftButton)
203 mouseClick(waitForObject(":SALOME*.3D View Operations_OCCViewer_ViewPort3d"), 209, 98, 0, Qt.LeftButton)
204 mouseClick(waitForObject(":SALOME*.3D View Operations_OCCViewer_ViewPort3d"), 283, 275, 0, Qt.LeftButton)
205 #TODO_1 clickButton(waitForObject(":Line.property_panel_cancel_QToolButton"))
206 activateItem(waitForObjectItem(":SALOME*_QMenuBar", "Sketch"))
207 activateItem(waitForObjectItem(":Sketch_QMenu", "Fillet"))
208 mouseClick(waitForObject(":SALOME*.3D View Operations_OCCViewer_ViewPort3d"), 211, 99, 0, Qt.LeftButton)
209 type(waitForObject(":Fillet.ConstraintValue_ModuleBase_ParamSpinBox"), "<Ctrl+A>")
210 type(waitForObject(":Fillet.ConstraintValue_ModuleBase_ParamSpinBox"), "<Keypad_1>")
211 type(waitForObject(":Fillet.ConstraintValue_ModuleBase_ParamSpinBox"), "<Keypad_0>")
212 type(waitForObject(":Fillet.ConstraintValue_ModuleBase_ParamSpinBox"), "<Keypad_Enter>")
213 waitFor("object.exists(':Fillet.qt_spinbox_lineedit_QLineEdit')", 20000)
214 test.compare(str(findObject(":Fillet.qt_spinbox_lineedit_QLineEdit").text), "10")
215 mouseClick(waitForObject(":Fillet.qt_spinbox_lineedit_QLineEdit"), 48, 6, 0, Qt.LeftButton)
216 type(waitForObject(":Fillet.ConstraintValue_ModuleBase_ParamSpinBox"), "<Ctrl+A>")
217 type(waitForObject(":Fillet.ConstraintValue_ModuleBase_ParamSpinBox"), "a")
218 waitFor("object.exists(':Fillet.qt_spinbox_lineedit_QLineEdit')", 20000)
219 test.compare(str(findObject(":Fillet.qt_spinbox_lineedit_QLineEdit").text), "10")
220 clickButton(waitForObject(":Fillet.property_panel_cancel_QToolButton"))