test.squish/suite_FEATURE_EXTRUSION/tst_extrusion_003/test.py

   1 def main():
   2     #[project] NewGEOM
   3     #[Scenario] Extrusion_003
   4     #[Topic] 'Extrusion_cut' functionality
   5     #[Tested functionality]
   6     #[Summary description]
   7     #[Expected results]
   8     #[General comments]
   9
  10     source(findFile("scripts", "common.py"))
  11
  12     #[section] Application start
  13     #[step] Launch SALOME
  14     startApplication("salome_run.sh")
  15
  16     set_defaults()
  17
  18     #[step] Open 'for_extrusion_001.hdf'
  19     open(DATA_PATH + "/for_extrusion_003.hdf")
  20
  21     #[step] Activate NewGeom
  22     clickButton(waitForObject(":SALOME*.NewGeom_QToolButton"))
  23
  24     # [step] Activate Part_1
  25     waitForObjectItem(":Object browser_XGUI_DataTree", "Part\\_1 (Not loaded)")
  26     clickItem(":Object browser_XGUI_DataTree", "Part\\_1 (Not loaded)", 71, 10, 0, Qt.LeftButton)
  27     openItemContextMenu(waitForObject(":Object browser_XGUI_DataTree"), "Part\\_1 (Not loaded)", 70, 9, 0)
  28     activateItem(waitForObjectItem(":_QMenu", "Activate"))
  29
  30     #[step] Fit all
  31     fit_all()
  32
  33     #[step] Features - ExtrusionCut
  34     mouseClick(waitForObjectItem(":SALOME*_QMenuBar", "Features"))
  35     mouseClick(waitForObjectItem(":_QMenu", "ExtrusionCut"))
  36
  37     #[step] Select the upper face for sketching
  38     mouseClick(waitForObject(":SALOME*.3D View Operations_OCCViewer_ViewPort3d"), 243, 171, 0, Qt.LeftButton)
  39
  40     #[step] Draw closing contour, consisting from 4 lines
  41     lines_create_in_view([(83, 152), (85, 346), (669, 344), (669, 162), (83, 152)])
  42
  43     #[step] Ok
  44     clickButton(waitForObject(":Sketch.property_panel_ok_QToolButton"))
  45
  46     #[step] Define value of 'To size' parameter of extrusionCut, set it equal to 50
  47     type(waitForObject(":Extrusion.to_size_ModuleBase_ParamSpinBox_2"), "<Ctrl+A>")
  48     type(waitForObject(":Extrusion.to_size_ModuleBase_ParamSpinBox_2"), 50)
  49
  50     #[step] Define value of 'From size' parameter of extrusionCut, set it equal to 50
  51     type(waitForObject(":Extrusion.from_size_ModuleBase_ParamSpinBox_2"), "<Ctrl+A>")
  52     type(waitForObject(":Extrusion.from_size_ModuleBase_ParamSpinBox_2"), 50)
  53
  54     #[step] Ok
  55     clickButton(waitForObject(":ExtrusionCut.property_panel_ok_QToolButton"))
  56
  57     #[step] Click 'Reset view' toolbar button
  58     clickButton(waitForObject(":SALOME*.Reset_QToolButton"))
  59
  60     #[check] Check that extrusionCut operation has been executed successfully
  61     test.vp("VP1")
  62
  63     # [step] Close application without saving
  64     close_application()