1 ## Copyright (C) 2014-2017 CEA/DEN, EDF R&D
3 ## This library is free software; you can redistribute it and/or
4 ## modify it under the terms of the GNU Lesser General Public
5 ## License as published by the Free Software Foundation; either
6 ## version 2.1 of the License, or (at your option) any later version.
8 ## This library is distributed in the hope that it will be useful,
9 ## but WITHOUT ANY WARRANTY; without even the implied warranty of
10 ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
11 ## Lesser General Public License for more details.
13 ## You should have received a copy of the GNU Lesser General Public
14 ## License along with this library; if not, write to the Free Software
15 ## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
17 ## See http:##www.salome-platform.org/ or
18 ## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
23 # [Scenario] Extrusion_002
24 # [Topic] 'Extrusion by boarding planes and offsets' functionality
25 # [Tested functionality]
26 # [Summary description]
30 source(findFile("scripts", "common.py"))
32 # [section] Application start
33 # [step] Launch SALOME
34 startApplication("salome_run.sh")
38 # [step] Open 'for_extrusion_001.hdf'
39 open(DATA_PATH + "/for_extrusion_002.hdf")
41 # [step] Activate SHAPER
42 clickButton(waitForObject(":SALOME*.Shaper_QToolButton"))
44 # [step] Activate Part_1
45 waitForObjectItem(":Object browser_XGUI_DataTree", "Part\\_1 (Not loaded)")
46 clickItem(":Object browser_XGUI_DataTree", "Part\\_1 (Not loaded)", 48, 10, 0, Qt.LeftButton)
47 openItemContextMenu(waitForObject(":Object browser_XGUI_DataTree"), "Part\\_1 (Not loaded)", 48, 10, 0)
48 activateItem(waitForObjectItem(":_QMenu", "Activate"))
54 # [step] Execute extrusion for sketch_1
55 mouseClick(waitForObjectItem(":SALOME*_QMenuBar", "Features"))
56 mouseClick(waitForObjectItem(":_QMenu", "Extrusion"))
58 # [step] Select sketch_1 as base
59 mouseClick(waitForObject(":SALOME*.3D View Operations_OCCViewer_ViewPort3d"), 324, 222, 0, Qt.LeftButton)
61 # [step] Select 'By boarding planes and offsets' button
62 clickButton(waitForObject(":Extrusion_QToolButton"))
64 # [check] Check that no result is previewed [vp NO_PREVIEW]
68 # [step] Select upper face as face 'To'
69 mouseClick(waitForObject(":Extrusion.Select a sketch face_QListWidget"), 80, 47, 0, Qt.LeftButton)
70 mouseClick(waitForObject(":SALOME*.3D View Operations_OCCViewer_ViewPort3d"), 350, 231, 0, Qt.LeftButton)
71 mouseClick(waitForObject(":To_QLineEdit"), 31, 11, 0, Qt.LeftButton)
72 mouseClick(waitForObject(":SALOME*.3D View Operations_OCCViewer_ViewPort3d"), 369, 87, 0, Qt.LeftButton)
74 # [check] Check that preview is updated [vp PREVIEW_TO]
78 # [step] Select lower face as face 'From'
79 mouseClick(waitForObject(":From_QLineEdit"), 80, 11, 0, Qt.LeftButton)
80 mouseClick(waitForObject(":SALOME*.3D View Operations_OCCViewer_ViewPort3d"), 350, 413, 0, Qt.LeftButton)
82 # [check] Check that preview is updated [vp PREVIEW_FROM]
83 test.vp("PREVIEW_FROM")
85 # [step] Define offset for face 'To'
86 type(waitForObject(":To.to_offset_ModuleBase_ParamSpinBox"), "<Ctrl+A>")
87 type(waitForObject(":To.to_offset_ModuleBase_ParamSpinBox"), 200)
88 type(waitForObject(":To.to_offset_ModuleBase_ParamSpinBox"), "<Return>")
93 # [check] Check that preview is updated [vp PREVIEW_TO_OFFSET]
94 test.vp("PREVIEW_TO_OFFSET")
96 # [step] Define offset for face 'From'
97 type(waitForObject(":From.from_offset_ModuleBase_ParamSpinBox"), "<Ctrl+A>")
98 type(waitForObject(":From.from_offset_ModuleBase_ParamSpinBox"), 200)
99 type(waitForObject(":From.from_offset_ModuleBase_ParamSpinBox"), "<Return>")
104 # [check] Check that preview is updated [vp PREVIEW_FROM_OFFSET]
105 test.vp("PREVIEW_FROM_OFFSET")
108 clickButton(waitForObject(":Extrusion.property_panel_ok_QToolButton"))
113 # [check] Check that extrusion is built [vp EXTRUSION]
116 # [step] Close application without saving