test.models/wheel_rim.py

   1 # Copyright (C) 2014-2020  CEA/DEN, EDF R&D
   2 #
   3 # This library is free software; you can redistribute it and/or
   4 # modify it under the terms of the GNU Lesser General Public
   5 # License as published by the Free Software Foundation; either
   6 # version 2.1 of the License, or (at your option) any later version.
   7 #
   8 # This library is distributed in the hope that it will be useful,
   9 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  10 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  11 # Lesser General Public License for more details.
  12 #
  13 # You should have received a copy of the GNU Lesser General Public
  14 # License along with this library; if not, write to the Free Software
  15 # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  16 #
  17 # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
  18 #
  19
  20 from salome.shaper import model
  21
  22 model.begin()
  23 partSet = model.moduleDocument()
  24 Part_1 = model.addPart(partSet)
  25 Part_1_doc = Part_1.document()
  26 Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
  27 SketchLine_1 = Sketch_1.addLine(-70.81663645026607, 190, 229.1833635497339, 190)
  28 SketchLine_1.setAuxiliary(True)
  29 SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_1.result())
  30 SketchLine_2 = Sketch_1.addLine(16.64097565470627, 190, 22.64097565470627, 190)
  31 SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_2.startPoint(), SketchLine_1.result())
  32 SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_1.result())
  33 SketchConstraintLength_1 = Sketch_1.setLength(SketchLine_2.result(), 6)
  34 SketchArc_1 = Sketch_1.addArc(32.64097565470627, 190, 42.64097565470627, 190, 22.64097565470627, 190, True)
  35 SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchArc_1.startPoint(), SketchLine_1.result())
  36 SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchArc_1.endPoint())
  37 SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchArc_1.center(), SketchLine_1.result())
  38 SketchConstraintRadius_1 = Sketch_1.setRadius(SketchArc_1.results()[1], 10)
  39 SketchLine_3 = Sketch_1.addLine(42.64097565470627, 190, 147.6409756547063, 190)
  40 SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchArc_1.startPoint(), SketchLine_3.startPoint())
  41 SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_1.result())
  42 SketchConstraintLength_2 = Sketch_1.setLength(SketchLine_3.result(), 105)
  43 SketchLine_4 = Sketch_1.addLine(model.selection("EDGE", "PartSet/OX"))
  44 SketchConstraintDistance_1 = Sketch_1.setDistance(SketchLine_1.startPoint(), SketchLine_4.result(), 190)
  45 SketchLine_5 = Sketch_1.addLine(167.6409756547062, 232.4170641625502, 167.6409756547062, 155.6475648742598)
  46 SketchLine_5.setAuxiliary(True)
  47 SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_5.result())
  48 SketchArc_2 = Sketch_1.addArc(147.6409756547063, 202.5, 147.6409756547063, 190, 160.1409756547063, 202.5, False)
  49 SketchConstraintCoincidence_8 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchArc_2.startPoint())
  50 SketchConstraintTangent_1 = Sketch_1.setTangent(SketchLine_3.result(), SketchArc_2.results()[1])
  51 SketchConstraintRadius_2 = Sketch_1.setRadius(SketchArc_2.results()[1], 12.5)
  52 SketchLine_6 = Sketch_1.addLine(147.6409756547063, 202.5, 147.6409756547063, 190)
  53 SketchLine_6.setAuxiliary(True)
  54 SketchConstraintCoincidence_9 = Sketch_1.setCoincident(SketchArc_2.center(), SketchLine_6.startPoint())
  55 SketchConstraintCoincidence_10 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_6.endPoint())
  56 SketchConstraintCoincidence_11 = Sketch_1.setCoincident(SketchArc_2.startPoint(), SketchLine_6.endPoint())
  57 SketchLine_7 = Sketch_1.addLine(160.1409756547063, 202.5, 147.6409756547063, 202.5)
  58 SketchLine_7.setAuxiliary(True)
  59 SketchConstraintCoincidence_12 = Sketch_1.setCoincident(SketchArc_2.endPoint(), SketchLine_7.startPoint())
  60 SketchConstraintCoincidence_13 = Sketch_1.setCoincident(SketchArc_2.center(), SketchLine_7.endPoint())
  61 SketchConstraintCoincidence_14 = Sketch_1.setCoincident(SketchLine_6.startPoint(), SketchLine_7.endPoint())
  62 SketchConstraintAngle_1 = Sketch_1.setAngle(SketchLine_6.result(), SketchLine_7.result(), 90)
  63 SketchConstraintDistance_2 = Sketch_1.setDistance(SketchLine_2.endPoint(), SketchLine_5.result(), 145)
  64 SketchPoint_1 = Sketch_1.addPoint(167.6409756547062, 218.5857086760099)
  65 SketchConstraintCoincidence_15 = Sketch_1.setCoincident(SketchPoint_1.coordinates(), SketchLine_5.result())
  66 SketchArc_3 = Sketch_1.addArc(181.1409756547063, 202.5, 167.6409756547062, 218.5857086760099, 160.1409756547063, 202.5, False)
  67 SketchConstraintCoincidence_16 = Sketch_1.setCoincident(SketchPoint_1.coordinates(), SketchArc_3.startPoint())
  68 SketchConstraintCoincidence_17 = Sketch_1.setCoincident(SketchArc_2.endPoint(), SketchArc_3.endPoint())
  69 SketchConstraintCoincidence_18 = Sketch_1.setCoincident(SketchLine_7.startPoint(), SketchArc_3.endPoint())
  70 SketchConstraintTangent_2 = Sketch_1.setTangent(SketchArc_2.results()[1], SketchArc_3.results()[1])
  71 SketchConstraintTangent_3 = Sketch_1.setTangent(SketchArc_3.results()[1], SketchArc_2.results()[1])
  72 model.do()
  73
  74 # check overconstraint message appears
  75 assert Sketch_1.solverError().value() != "", "FAILED: Sketch should report over-constrained situation"
  76 # remove duplicated Tangent constraint
  77 Part_1_doc.removeFeature(SketchConstraintTangent_3.feature())
  78 model.do()
  79 assert Sketch_1.solverError().value() == "", "FAILED: Sketch should NOT report over-constrained situation"
  80
  81 # continue creating model
  82 SketchLine_8 = Sketch_1.addLine(16.64097565470627, 190, 16.64097565470627, 184)
  83 SketchConstraintCoincidence_19 = Sketch_1.setCoincident(SketchLine_2.startPoint(), SketchLine_8.startPoint())
  84 SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_8.result())
  85 SketchConstraintLength_3 = Sketch_1.setLength(SketchLine_8.result(), 6)
  86 SketchLine_9 = Sketch_1.addLine(16.64097565470627, 184, 169.1531000589648, 184)
  87 SketchLine_9.setAuxiliary(True)
  88 SketchConstraintCoincidence_20 = Sketch_1.setCoincident(SketchLine_8.endPoint(), SketchLine_9.startPoint())
  89 SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_9.result())
  90 SketchLine_10 = Sketch_1.addLine(16.64097565470627, 184, 18.2409756547065, 184)
  91 SketchConstraintCoincidence_21 = Sketch_1.setCoincident(SketchLine_10.startPoint(), SketchLine_8.endPoint())
  92 SketchLine_11 = Sketch_1.addLine(147.6409756547063, 190, 147.6409756547063, 184)
  93 SketchLine_11.setAuxiliary(True)
  94 SketchConstraintCoincidence_22 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_11.startPoint())
  95 SketchConstraintCoincidence_23 = Sketch_1.setCoincident(SketchArc_2.startPoint(), SketchLine_11.startPoint())
  96 SketchConstraintCoincidence_24 = Sketch_1.setCoincident(SketchLine_6.endPoint(), SketchLine_11.startPoint())
  97 SketchConstraintCoincidence_25 = Sketch_1.setCoincident(SketchLine_11.endPoint(), SketchLine_9.result())
  98 SketchConstraintPerpendicular_1 = Sketch_1.setPerpendicular(SketchLine_11.result(), SketchLine_9.result())
  99 SketchArc_4 = Sketch_1.addArc(147.6409756547063, 202.5, 147.6409756547063, 184, 166.1409756547063, 202.5, False)
 100 SketchArc_4.setName("SketchArc_5")
 101 SketchArc_4.result().setName("SketchArc_5")
 102 SketchArc_4.results()[1].setName("SketchArc_5_2")
 103 SketchConstraintCoincidence_26 = Sketch_1.setCoincident(SketchArc_2.center(), SketchArc_4.center())
 104 SketchConstraintCoincidence_27 = Sketch_1.setCoincident(SketchLine_6.startPoint(), SketchArc_4.center())
 105 SketchConstraintCoincidence_28 = Sketch_1.setCoincident(SketchLine_7.endPoint(), SketchArc_4.center())
 106 SketchConstraintCoincidence_29 = Sketch_1.setCoincident(SketchLine_11.endPoint(), SketchArc_4.startPoint())
 107 SketchConstraintCoincidence_30 = Sketch_1.setCoincident(SketchArc_4.endPoint(), SketchLine_7.result())
 108 SketchLine_12 = Sketch_1.addLine(47.47337262898633, 184, 147.6409756547063, 184)
 109 SketchArc_5 = Sketch_1.addArc(32.64097565470627, 190, 32.64097565470627, 174, 47.47337262898633, 184, False)
 110 SketchArc_5.setName("SketchArc_10")
 111 SketchArc_5.result().setName("SketchArc_10")
 112 SketchArc_5.results()[1].setName("SketchArc_10_2")
 113 SketchConstraintCoincidence_31 = Sketch_1.setCoincident(SketchArc_5.endPoint(), SketchLine_12.startPoint())
 114 SketchConstraintCoincidence_32 = Sketch_1.setCoincident(SketchLine_11.endPoint(), SketchLine_12.endPoint())
 115 SketchConstraintCoincidence_33 = Sketch_1.setCoincident(SketchArc_4.startPoint(), SketchLine_12.endPoint())
 116 SketchArc_6 = Sketch_1.addArc(181.1409756547063, 202.5, 166.1409756547063, 202.5, 171.498118511849, 213.9897921211111, True)
 117 SketchConstraintCoincidence_34 = Sketch_1.setCoincident(SketchArc_4.endPoint(), SketchArc_6.startPoint())
 118 SketchConstraintCoincidence_35 = Sketch_1.setCoincident(SketchArc_6.center(), SketchArc_3.center())
 119 SketchLine_13 = Sketch_1.addLine(181.1409756547063, 202.5, 167.6409756547062, 218.5857086760099)
 120 SketchLine_13.setAuxiliary(True)
 121 SketchConstraintCoincidence_36 = Sketch_1.setCoincident(SketchArc_6.center(), SketchLine_13.startPoint())
 122 SketchConstraintCoincidence_37 = Sketch_1.setCoincident(SketchPoint_1.coordinates(), SketchLine_13.endPoint())
 123 SketchConstraintCoincidence_38 = Sketch_1.setCoincident(SketchArc_3.startPoint(), SketchLine_13.endPoint())
 124 SketchConstraintCoincidence_39 = Sketch_1.setCoincident(SketchLine_13.result(), SketchArc_6.endPoint())
 125 SketchLine_14 = Sketch_1.addLine(167.6409756547062, 218.5857086760099, 171.498118511849, 213.9897921211111)
 126 SketchConstraintCoincidence_40 = Sketch_1.setCoincident(SketchPoint_1.coordinates(), SketchLine_14.startPoint())
 127 SketchConstraintCoincidence_41 = Sketch_1.setCoincident(SketchArc_3.startPoint(), SketchLine_14.startPoint())
 128 SketchConstraintCoincidence_42 = Sketch_1.setCoincident(SketchLine_13.endPoint(), SketchLine_14.startPoint())
 129 SketchConstraintCoincidence_43 = Sketch_1.setCoincident(SketchArc_6.endPoint(), SketchLine_14.endPoint())
 130 SketchLine_15 = Sketch_1.addLine(32.64097565470627, 190, 32.64097565470627, 174)
 131 SketchLine_15.setAuxiliary(True)
 132 SketchConstraintCoincidence_44 = Sketch_1.setCoincident(SketchArc_1.center(), SketchLine_15.startPoint())
 133 SketchConstraintCoincidence_45 = Sketch_1.setCoincident(SketchLine_15.endPoint(), SketchArc_5.startPoint())
 134 SketchConstraintVertical_3 = Sketch_1.setVertical(SketchLine_15.result())
 135 SketchLine_16 = Sketch_1.addLine(32.64097565470627, 174, 12.64097565470628, 174)
 136 SketchConstraintCoincidence_46 = Sketch_1.setCoincident(SketchLine_15.endPoint(), SketchLine_16.startPoint())
 137 SketchArc_7 = Sketch_1.addArc(12.64097565470628, 165, 12.64097565470628, 174, 3.640975654706275, 165, False)
 138 SketchConstraintCoincidence_47 = Sketch_1.setCoincident(SketchLine_16.endPoint(), SketchArc_7.startPoint())
 139 SketchLine_17 = Sketch_1.addLine(3.640975654706275, 165, 3.640975654706275, 100)
 140 SketchConstraintCoincidence_48 = Sketch_1.setCoincident(SketchArc_7.endPoint(), SketchLine_17.startPoint())
 141 SketchLine_18 = Sketch_1.addLine(3.640975654706275, 100, -5.359024345293726, 100)
 142 SketchConstraintCoincidence_49 = Sketch_1.setCoincident(SketchLine_17.endPoint(), SketchLine_18.startPoint())
 143 SketchLine_19 = Sketch_1.addLine(-5.359024345293726, 100, -5.359024345293726, 165)
 144 SketchConstraintCoincidence_50 = Sketch_1.setCoincident(SketchLine_18.endPoint(), SketchLine_19.startPoint())
 145 SketchLine_20 = Sketch_1.addLine(-5.359024345293726, 165, -5.359024345293726, 100)
 146 SketchConstraintCoincidence_51 = Sketch_1.setCoincident(SketchLine_19.endPoint(), SketchLine_20.startPoint())
 147 SketchConstraintCoincidence_52 = Sketch_1.setCoincident(SketchLine_18.endPoint(), SketchLine_20.endPoint())
 148 SketchConstraintCoincidence_53 = Sketch_1.setCoincident(SketchLine_19.startPoint(), SketchLine_20.endPoint())
 149 SketchConstraintHorizontal_3 = Sketch_1.setHorizontal(SketchLine_16.result())
 150 SketchConstraintHorizontal_4 = Sketch_1.setHorizontal(SketchLine_18.result())
 151 SketchConstraintVertical_4 = Sketch_1.setVertical(SketchLine_17.result())
 152 SketchConstraintVertical_5 = Sketch_1.setVertical(SketchLine_20.result())
 153 SketchConstraintTangent_4 = Sketch_1.setTangent(SketchLine_16.result(), SketchArc_7.results()[1])
 154 SketchConstraintTangent_5 = Sketch_1.setTangent(SketchLine_17.result(), SketchArc_7.results()[1])
 155 SketchConstraintRadius_3 = Sketch_1.setRadius(SketchArc_7.results()[1], 9)
 156 SketchConstraintLength_4 = Sketch_1.setLength(SketchLine_20.result(), 65)
 157 SketchLine_21 = Sketch_1.addLine(12.64097565470628, 174, 12.64097565470628, 192.2067667108204)
 158 SketchLine_21.setName("SketchLine_22")
 159 SketchLine_21.result().setName("SketchLine_22")
 160 SketchLine_21.setAuxiliary(True)
 161 SketchConstraintCoincidence_54 = Sketch_1.setCoincident(SketchLine_16.endPoint(), SketchLine_21.startPoint())
 162 SketchConstraintCoincidence_55 = Sketch_1.setCoincident(SketchArc_7.startPoint(), SketchLine_21.startPoint())
 163 SketchConstraintVertical_6 = Sketch_1.setVertical(SketchLine_21.result())
 164 SketchConstraintLength_5 = Sketch_1.setLength(SketchLine_16.result(), 20)
 165 SketchArc_8 = Sketch_1.addArc(12.64097565470628, 165, -5.359024345293726, 165, 12.64097565470625, 183, True)
 166 SketchConstraintCoincidence_56 = Sketch_1.setCoincident(SketchArc_7.center(), SketchArc_8.center())
 167 SketchConstraintCoincidence_57 = Sketch_1.setCoincident(SketchLine_19.endPoint(), SketchArc_8.startPoint())
 168 SketchConstraintCoincidence_58 = Sketch_1.setCoincident(SketchLine_20.startPoint(), SketchArc_8.startPoint())
 169 SketchConstraintCoincidence_59 = Sketch_1.setCoincident(SketchArc_8.endPoint(), SketchLine_21.result())
 170 SketchLine_22 = Sketch_1.addLine(12.64097565470625, 183, 18.2409756547065, 183)
 171 SketchLine_22.setName("SketchLine_23")
 172 SketchLine_22.result().setName("SketchLine_23")
 173 SketchConstraintCoincidence_60 = Sketch_1.setCoincident(SketchArc_8.endPoint(), SketchLine_22.startPoint())
 174 SketchConstraintHorizontal_5 = Sketch_1.setHorizontal(SketchLine_22.result())
 175 SketchConstraintDistance_3 = Sketch_1.setDistance(SketchLine_18.startPoint(), SketchLine_19.result(), 9)
 176 SketchLine_23 = Sketch_1.addLine(18.2409756547065, 183, 18.2409756547065, 184)
 177 SketchLine_23.setName("SketchLine_24")
 178 SketchLine_23.result().setName("SketchLine_24")
 179 SketchConstraintCoincidence_61 = Sketch_1.setCoincident(SketchLine_22.endPoint(), SketchLine_23.startPoint())
 180 SketchConstraintCoincidence_62 = Sketch_1.setCoincident(SketchLine_10.endPoint(), SketchLine_23.endPoint())
 181 SketchConstraintVertical_7 = Sketch_1.setVertical(SketchLine_23.result())
 182 SketchConstraintCoincidence_63 = Sketch_1.setCoincident(SketchArc_5.endPoint(), SketchLine_9.result())
 183 SketchConstraintCoincidence_64 = Sketch_1.setCoincident(SketchLine_10.endPoint(), SketchLine_9.result())
 184 SketchConstraintCoincidence_65 = Sketch_1.setCoincident(SketchArc_5.center(), SketchLine_15.startPoint())
 185 SketchConstraintDistance_4 = Sketch_1.setDistance(SketchLine_10.startPoint(), SketchLine_23.result(), 1.6, True)
 186 SketchConstraintDistance_5 = Sketch_1.setDistance(SketchLine_10.startPoint(), SketchLine_22.result(), 1, True)
 187 SketchConstraintRadius_4 = Sketch_1.setRadius(SketchArc_6.results()[1], 15)
 188 model.do()
 189 Revolution_1 = model.addRevolution(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchLine_8f-SketchLine_10f-SketchLine_24r-SketchLine_23r-SketchArc_8_2f-SketchLine_19r-SketchLine_18r-SketchLine_17r-SketchArc_7_2r-SketchLine_16r-SketchArc_10_2f-SketchLine_12f-SketchArc_5_2f-SketchArc_6_2r-SketchLine_14r-SketchArc_3_2f-SketchArc_2_2r-SketchLine_3r-SketchArc_1_2r-SketchLine_2r")], model.selection("EDGE", "PartSet/OX"), 360, 0)
 190 Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("YOZ"))
 191 SketchCircle_1 = Sketch_2.addCircle(0, 120, 7.5)
 192 SketchLine_24 = Sketch_2.addLine(model.selection("EDGE", "PartSet/OZ"))
 193 SketchLine_24.setName("SketchLine_25")
 194 SketchLine_24.result().setName("SketchLine_25")
 195 SketchConstraintCoincidence_66 = Sketch_2.setCoincident(SketchCircle_1.center(), SketchLine_24.result())
 196 SketchLine_25 = Sketch_2.addLine(model.selection("EDGE", "PartSet/OY"))
 197 SketchLine_25.setName("SketchLine_26")
 198 SketchLine_25.result().setName("SketchLine_26")
 199 SketchConstraintDistance_6 = Sketch_2.setDistance(SketchCircle_1.center(), SketchLine_25.result(), 120)
 200 SketchConstraintRadius_5 = Sketch_2.setRadius(SketchCircle_1.results()[1], 7.5)
 201 SketchMultiRotation_1 = Sketch_2.addRotation([SketchCircle_1.results()[1]], SketchLine_24.startPoint(), 24, 15)
 202 [SketchCircle_2, SketchCircle_3, SketchCircle_4, SketchCircle_5, SketchCircle_6, SketchCircle_7, SketchCircle_8, SketchCircle_9, SketchCircle_10, SketchCircle_11, SketchCircle_12, SketchCircle_13, SketchCircle_14, SketchCircle_15] = SketchMultiRotation_1.rotated()
 203 model.do()
 204 Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", "Sketch_2")], model.selection(), 10, 10)
 205 Boolean_1 = model.addCut(Part_1_doc, [model.selection("SOLID", "Revolution_1_1")], [model.selection("SOLID", "Extrusion_1_6"), model.selection("SOLID", "Extrusion_1_8"), model.selection("SOLID", "Extrusion_1_9"), model.selection("SOLID", "Extrusion_1_3"), model.selection("SOLID", "Extrusion_1_2"), model.selection("SOLID", "Extrusion_1_1"), model.selection("SOLID", "Extrusion_1_4"), model.selection("SOLID", "Extrusion_1_14"), model.selection("SOLID", "Extrusion_1_5"), model.selection("SOLID", "Extrusion_1_15"), model.selection("SOLID", "Extrusion_1_11"), model.selection("SOLID", "Extrusion_1_10"), model.selection("SOLID", "Extrusion_1_12"), model.selection("SOLID", "Extrusion_1_13"), model.selection("SOLID", "Extrusion_1_7")])
 206 model.end()
 207
 208 from GeomAPI import GeomAPI_Shape
 209
 210 model.testNbResults(Boolean_1, 1)
 211 model.testNbSubResults(Boolean_1, [0])
 212 model.testNbSubShapes(Boolean_1, GeomAPI_Shape.SOLID, [1])
 213 model.testNbSubShapes(Boolean_1, GeomAPI_Shape.FACE, [35])
 214 model.testNbSubShapes(Boolean_1, GeomAPI_Shape.EDGE, [162])
 215 model.testNbSubShapes(Boolean_1, GeomAPI_Shape.VERTEX, [324])
 216 model.testResultsVolumes(Boolean_1, [2052731.260104598477482795715332031])
 217
 218 assert(model.checkPythonDump())