test.models/wheel_rim.py

   1 ## Copyright (C) 2014-2017  CEA/DEN, EDF R&D
   2 ##
   3 ## This library is free software; you can redistribute it and/or
   4 ## modify it under the terms of the GNU Lesser General Public
   5 ## License as published by the Free Software Foundation; either
   6 ## version 2.1 of the License, or (at your option) any later version.
   7 ##
   8 ## This library is distributed in the hope that it will be useful,
   9 ## but WITHOUT ANY WARRANTY; without even the implied warranty of
  10 ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  11 ## Lesser General Public License for more details.
  12 ##
  13 ## You should have received a copy of the GNU Lesser General Public
  14 ## License along with this library; if not, write to the Free Software
  15 ## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
  16 ##
  17 ## See http:##www.salome-platform.org/ or
  18 ## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
  19 ##
  20
  21 from salome.shaper import model
  22
  23 model.begin()
  24 partSet = model.moduleDocument()
  25 Part_1 = model.addPart(partSet)
  26 Part_1_doc = Part_1.document()
  27 Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
  28 SketchLine_1 = Sketch_1.addLine(-70.81663645026607, 190, 229.1833635497339, 190)
  29 SketchLine_1.setAuxiliary(True)
  30 SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_1.result())
  31 SketchLine_2 = Sketch_1.addLine(16.63997893808557, 190, 22.63997893808557, 190)
  32 SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_2.startPoint(), SketchLine_1.result())
  33 SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_1.result())
  34 SketchConstraintLength_1 = Sketch_1.setLength(SketchLine_2.result(), 6)
  35 SketchArc_1 = Sketch_1.addArc(32.63997893808557, 190, 42.63997893808557, 190, 22.63997893808557, 190, True)
  36 SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchArc_1.startPoint(), SketchLine_1.result())
  37 SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchArc_1.endPoint())
  38 SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchArc_1.center(), SketchLine_1.result())
  39 SketchConstraintRadius_1 = Sketch_1.setRadius(SketchArc_1.results()[1], 10)
  40 SketchLine_3 = Sketch_1.addLine(42.63997893808557, 190, 147.6399789380856, 190)
  41 SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchArc_1.startPoint(), SketchLine_3.startPoint())
  42 SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_1.result())
  43 SketchConstraintLength_2 = Sketch_1.setLength(SketchLine_3.result(), 105)
  44 SketchLine_4 = Sketch_1.addLine(model.selection("EDGE", "PartSet/OX"))
  45 SketchConstraintDistance_1 = Sketch_1.setDistance(SketchLine_1.startPoint(), SketchLine_4.result(), 190)
  46 SketchLine_5 = Sketch_1.addLine(167.6399789380856, 232.4170641625502, 167.6399789380856, 155.6475648742598)
  47 SketchLine_5.setAuxiliary(True)
  48 SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_5.result())
  49 SketchArc_2 = Sketch_1.addArc(147.6399786642556, 202.5, 147.6399789380856, 190, 160.1399786642556, 202.50000027383, False)
  50 SketchConstraintCoincidence_8 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchArc_2.startPoint())
  51 SketchConstraintTangent_1 = Sketch_1.setTangent(SketchLine_3.result(), SketchArc_2.results()[1])
  52 SketchConstraintRadius_2 = Sketch_1.setRadius(SketchArc_2.results()[1], 12.5)
  53 SketchLine_6 = Sketch_1.addLine(147.6399786642556, 202.5, 147.6399789380856, 190)
  54 SketchLine_6.setAuxiliary(True)
  55 SketchConstraintCoincidence_9 = Sketch_1.setCoincident(SketchArc_2.center(), SketchLine_6.startPoint())
  56 SketchConstraintCoincidence_9.setName("SketchConstraintCoincidence_11")
  57 SketchConstraintCoincidence_10 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_6.endPoint())
  58 SketchConstraintCoincidence_10.setName("SketchConstraintCoincidence_12")
  59 SketchConstraintCoincidence_11 = Sketch_1.setCoincident(SketchArc_2.startPoint(), SketchLine_6.endPoint())
  60 SketchConstraintCoincidence_11.setName("SketchConstraintCoincidence_13")
  61 SketchLine_7 = Sketch_1.addLine(160.1399786642556, 202.50000027383, 147.6399786642556, 202.5)
  62 SketchLine_7.setAuxiliary(True)
  63 SketchConstraintCoincidence_12 = Sketch_1.setCoincident(SketchArc_2.endPoint(), SketchLine_7.startPoint())
  64 SketchConstraintCoincidence_12.setName("SketchConstraintCoincidence_14")
  65 SketchConstraintCoincidence_13 = Sketch_1.setCoincident(SketchArc_2.center(), SketchLine_7.endPoint())
  66 SketchConstraintCoincidence_13.setName("SketchConstraintCoincidence_16")
  67 SketchConstraintCoincidence_14 = Sketch_1.setCoincident(SketchLine_6.startPoint(), SketchLine_7.endPoint())
  68 SketchConstraintCoincidence_14.setName("SketchConstraintCoincidence_17")
  69 SketchConstraintAngle_1 = Sketch_1.setAngle(SketchLine_6.result(), SketchLine_7.result(), 90)
  70 SketchConstraintDistance_2 = Sketch_1.setDistance(SketchLine_2.endPoint(), SketchLine_5.result(), 145)
  71 SketchPoint_1 = Sketch_1.addPoint(167.6399789380856, 217.9010257567384)
  72 SketchConstraintCoincidence_15 = Sketch_1.setCoincident(SketchPoint_1.coordinates(), SketchLine_5.result())
  73 SketchArc_3 = Sketch_1.addArc(179.7027453914111, 202.5000028194857, 167.6399789380856, 217.9010257567384, 160.1399786642556, 202.50000027383, False)
  74 SketchConstraintCoincidence_16 = Sketch_1.setCoincident(SketchPoint_1.coordinates(), SketchArc_3.startPoint())
  75 SketchConstraintCoincidence_16.setName("SketchConstraintCoincidence_18")
  76 SketchConstraintCoincidence_17 = Sketch_1.setCoincident(SketchArc_2.endPoint(), SketchArc_3.endPoint())
  77 SketchConstraintCoincidence_17.setName("SketchConstraintCoincidence_19")
  78 SketchConstraintCoincidence_18 = Sketch_1.setCoincident(SketchLine_7.startPoint(), SketchArc_3.endPoint())
  79 SketchConstraintCoincidence_18.setName("SketchConstraintCoincidence_20")
  80 SketchConstraintTangent_2 = Sketch_1.setTangent(SketchArc_2.results()[1], SketchArc_3.results()[1])
  81 SketchConstraintTangent_3 = Sketch_1.setTangent(SketchArc_3.results()[1], SketchArc_2.results()[1])
  82 model.do()
  83
  84 # check overconstraint message appears
  85 assert Sketch_1.solverError().value() != "", "FAILED: Sketch should report over-constrained situation"
  86 # remove duplicated Tangent constraint
  87 Part_1_doc.removeFeature(SketchConstraintTangent_3.feature())
  88 model.do()
  89 assert Sketch_1.solverError().value() == "", "FAILED: Sketch should NOT report over-constrained situation"
  90
  91 # continue creating model
  92 SketchLine_8 = Sketch_1.addLine(16.63997893808557, 190, 16.63997893808557, 184)
  93 SketchConstraintCoincidence_19 = Sketch_1.setCoincident(SketchLine_2.startPoint(), SketchLine_8.startPoint())
  94 SketchConstraintCoincidence_19.setName("SketchConstraintCoincidence_21")
  95 SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_8.result())
  96 SketchConstraintLength_3 = Sketch_1.setLength(SketchLine_8.result(), 6)
  97 SketchLine_9 = Sketch_1.addLine(16.63997893808557, 184, 169.1531000589648, 184)
  98 SketchLine_9.setAuxiliary(True)
  99 SketchConstraintCoincidence_20 = Sketch_1.setCoincident(SketchLine_8.endPoint(), SketchLine_9.startPoint())
 100 SketchConstraintCoincidence_20.setName("SketchConstraintCoincidence_22")
 101 SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_9.result())
 102 SketchLine_10 = Sketch_1.addLine(16.63997893808557, 184, 18.25728991640986, 184.0340386082476)
 103 SketchConstraintCoincidence_21 = Sketch_1.setCoincident(SketchLine_10.startPoint(), SketchLine_8.endPoint())
 104 SketchConstraintCoincidence_21.setName("SketchConstraintCoincidence_26")
 105 SketchLine_11 = Sketch_1.addLine(147.6399789380856, 190, 147.6399789380856, 184)
 106 SketchLine_11.setAuxiliary(True)
 107 SketchConstraintCoincidence_22 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_11.startPoint())
 108 SketchConstraintCoincidence_22.setName("SketchConstraintCoincidence_27")
 109 SketchConstraintCoincidence_23 = Sketch_1.setCoincident(SketchArc_2.startPoint(), SketchLine_11.startPoint())
 110 SketchConstraintCoincidence_23.setName("SketchConstraintCoincidence_28")
 111 SketchConstraintCoincidence_24 = Sketch_1.setCoincident(SketchLine_6.endPoint(), SketchLine_11.startPoint())
 112 SketchConstraintCoincidence_24.setName("SketchConstraintCoincidence_29")
 113 SketchConstraintCoincidence_25 = Sketch_1.setCoincident(SketchLine_11.endPoint(), SketchLine_9.result())
 114 SketchConstraintCoincidence_25.setName("SketchConstraintCoincidence_30")
 115 SketchConstraintPerpendicular_1 = Sketch_1.setPerpendicular(SketchLine_11.result(), SketchLine_9.result())
 116 SketchArc_4 = Sketch_1.addArc(147.6399786642556, 202.5, 147.6399789380856, 184, 166.1399786642556, 202.5000004052683, False)
 117 SketchArc_4.setName("SketchArc_5")
 118 SketchArc_4.result().setName("SketchArc_5")
 119 SketchArc_4.results()[1].setName("SketchArc_5_2")
 120 SketchConstraintCoincidence_26 = Sketch_1.setCoincident(SketchArc_2.center(), SketchArc_4.center())
 121 SketchConstraintCoincidence_26.setName("SketchConstraintCoincidence_31")
 122 SketchConstraintCoincidence_27 = Sketch_1.setCoincident(SketchLine_6.startPoint(), SketchArc_4.center())
 123 SketchConstraintCoincidence_27.setName("SketchConstraintCoincidence_32")
 124 SketchConstraintCoincidence_28 = Sketch_1.setCoincident(SketchLine_7.endPoint(), SketchArc_4.center())
 125 SketchConstraintCoincidence_28.setName("SketchConstraintCoincidence_33")
 126 SketchConstraintCoincidence_29 = Sketch_1.setCoincident(SketchLine_11.endPoint(), SketchArc_4.startPoint())
 127 SketchConstraintCoincidence_29.setName("SketchConstraintCoincidence_34")
 128 SketchConstraintCoincidence_30 = Sketch_1.setCoincident(SketchArc_4.endPoint(), SketchLine_7.result())
 129 SketchConstraintCoincidence_30.setName("SketchConstraintCoincidence_35")
 130 SketchLine_12 = Sketch_1.addLine(47.41543561031094, 183.8811996227169, 147.6399789380856, 184)
 131 SketchArc_5 = Sketch_1.addArc(32.62756748253716, 189.990123933557, 32.63997893808557, 173.9901287474201, 47.41543561031094, 183.8811996227169, False)
 132 SketchArc_5.setName("SketchArc_10")
 133 SketchArc_5.result().setName("SketchArc_10")
 134 SketchArc_5.results()[1].setName("SketchArc_10_2")
 135 SketchConstraintCoincidence_31 = Sketch_1.setCoincident(SketchArc_5.endPoint(), SketchLine_12.startPoint())
 136 SketchConstraintCoincidence_31.setName("SketchConstraintCoincidence_36")
 137 SketchConstraintCoincidence_32 = Sketch_1.setCoincident(SketchLine_11.endPoint(), SketchLine_12.endPoint())
 138 SketchConstraintCoincidence_32.setName("SketchConstraintCoincidence_37")
 139 SketchConstraintCoincidence_33 = Sketch_1.setCoincident(SketchArc_4.startPoint(), SketchLine_12.endPoint())
 140 SketchConstraintCoincidence_33.setName("SketchConstraintCoincidence_38")
 141 SketchArc_6 = Sketch_1.addArc(179.7027453914111, 202.5000028194857, 166.1399786642556, 202.5000004052683, 171.3396907288292, 213.177453732788, True)
 142 SketchConstraintCoincidence_34 = Sketch_1.setCoincident(SketchArc_4.endPoint(), SketchArc_6.startPoint())
 143 SketchConstraintCoincidence_34.setName("SketchConstraintCoincidence_39")
 144 SketchConstraintCoincidence_35 = Sketch_1.setCoincident(SketchArc_6.center(), SketchArc_3.center())
 145 SketchConstraintCoincidence_35.setName("SketchConstraintCoincidence_41")
 146 SketchLine_13 = Sketch_1.addLine(179.7027453914111, 202.5000028194857, 167.6399789380856, 217.9010257567384)
 147 SketchLine_13.setAuxiliary(True)
 148 SketchConstraintCoincidence_36 = Sketch_1.setCoincident(SketchArc_6.center(), SketchLine_13.startPoint())
 149 SketchConstraintCoincidence_36.setName("SketchConstraintCoincidence_40")
 150 SketchConstraintCoincidence_37 = Sketch_1.setCoincident(SketchPoint_1.coordinates(), SketchLine_13.endPoint())
 151 SketchConstraintCoincidence_37.setName("SketchConstraintCoincidence_42")
 152 SketchConstraintCoincidence_38 = Sketch_1.setCoincident(SketchArc_3.startPoint(), SketchLine_13.endPoint())
 153 SketchConstraintCoincidence_38.setName("SketchConstraintCoincidence_43")
 154 SketchConstraintCoincidence_39 = Sketch_1.setCoincident(SketchLine_13.result(), SketchArc_6.endPoint())
 155 SketchConstraintCoincidence_39.setName("SketchConstraintCoincidence_44")
 156 SketchLine_14 = Sketch_1.addLine(167.6399789380856, 217.9010257567384, 171.3396907288292, 213.177453732788)
 157 SketchConstraintCoincidence_40 = Sketch_1.setCoincident(SketchPoint_1.coordinates(), SketchLine_14.startPoint())
 158 SketchConstraintCoincidence_40.setName("SketchConstraintCoincidence_45")
 159 SketchConstraintCoincidence_41 = Sketch_1.setCoincident(SketchArc_3.startPoint(), SketchLine_14.startPoint())
 160 SketchConstraintCoincidence_41.setName("SketchConstraintCoincidence_46")
 161 SketchConstraintCoincidence_42 = Sketch_1.setCoincident(SketchLine_13.endPoint(), SketchLine_14.startPoint())
 162 SketchConstraintCoincidence_42.setName("SketchConstraintCoincidence_47")
 163 SketchConstraintCoincidence_43 = Sketch_1.setCoincident(SketchArc_6.endPoint(), SketchLine_14.endPoint())
 164 SketchConstraintCoincidence_43.setName("SketchConstraintCoincidence_48")
 165 SketchLine_15 = Sketch_1.addLine(32.63997893808557, 190, 32.63997893808557, 173.9901287474201)
 166 SketchLine_15.setAuxiliary(True)
 167 SketchConstraintCoincidence_44 = Sketch_1.setCoincident(SketchArc_1.center(), SketchLine_15.startPoint())
 168 SketchConstraintCoincidence_44.setName("SketchConstraintCoincidence_49")
 169 SketchConstraintCoincidence_45 = Sketch_1.setCoincident(SketchLine_15.endPoint(), SketchArc_5.startPoint())
 170 SketchConstraintCoincidence_45.setName("SketchConstraintCoincidence_51")
 171 SketchConstraintVertical_3 = Sketch_1.setVertical(SketchLine_15.result())
 172 SketchLine_16 = Sketch_1.addLine(32.63997893808557, 173.9901287474201, 12.63997893808557, 173.9901287474201)
 173 SketchConstraintCoincidence_46 = Sketch_1.setCoincident(SketchLine_15.endPoint(), SketchLine_16.startPoint())
 174 SketchConstraintCoincidence_46.setName("SketchConstraintCoincidence_52")
 175 SketchArc_7 = Sketch_1.addArc(12.63995378957197, 164.9901287474201, 12.63997893808557, 173.9901287474201, 3.639953789571974, 164.9901345179945, False)
 176 SketchConstraintCoincidence_47 = Sketch_1.setCoincident(SketchLine_16.endPoint(), SketchArc_7.startPoint())
 177 SketchConstraintCoincidence_47.setName("SketchConstraintCoincidence_53")
 178 SketchLine_17 = Sketch_1.addLine(3.639953789571974, 164.9901345179945, 3.639953789571974, 100.0000679958514)
 179 SketchConstraintCoincidence_48 = Sketch_1.setCoincident(SketchArc_7.endPoint(), SketchLine_17.startPoint())
 180 SketchConstraintCoincidence_48.setName("SketchConstraintCoincidence_54")
 181 SketchLine_18 = Sketch_1.addLine(3.639953789571974, 100.0000679958514, -5.360046210428025, 100.0000679958514)
 182 SketchConstraintCoincidence_49 = Sketch_1.setCoincident(SketchLine_17.endPoint(), SketchLine_18.startPoint())
 183 SketchConstraintCoincidence_49.setName("SketchConstraintCoincidence_55")
 184 SketchLine_19 = Sketch_1.addLine(-5.360046210428025, 100.0000679958514, -5.360046210428025, 165.0000679958514)
 185 SketchConstraintCoincidence_50 = Sketch_1.setCoincident(SketchLine_18.endPoint(), SketchLine_19.startPoint())
 186 SketchConstraintCoincidence_50.setName("SketchConstraintCoincidence_56")
 187 SketchLine_20 = Sketch_1.addLine(-5.360046210428025, 165.0000679958514, -5.360046210428025, 100.0000679958514)
 188 SketchConstraintCoincidence_51 = Sketch_1.setCoincident(SketchLine_19.endPoint(), SketchLine_20.startPoint())
 189 SketchConstraintCoincidence_51.setName("SketchConstraintCoincidence_57")
 190 SketchConstraintCoincidence_52 = Sketch_1.setCoincident(SketchLine_18.endPoint(), SketchLine_20.endPoint())
 191 SketchConstraintCoincidence_52.setName("SketchConstraintCoincidence_58")
 192 SketchConstraintCoincidence_53 = Sketch_1.setCoincident(SketchLine_19.startPoint(), SketchLine_20.endPoint())
 193 SketchConstraintCoincidence_53.setName("SketchConstraintCoincidence_59")
 194 SketchConstraintHorizontal_3 = Sketch_1.setHorizontal(SketchLine_16.result())
 195 SketchConstraintHorizontal_4 = Sketch_1.setHorizontal(SketchLine_18.result())
 196 SketchConstraintVertical_4 = Sketch_1.setVertical(SketchLine_17.result())
 197 SketchConstraintVertical_5 = Sketch_1.setVertical(SketchLine_20.result())
 198 SketchConstraintTangent_4 = Sketch_1.setTangent(SketchLine_16.result(), SketchArc_7.results()[1])
 199 SketchConstraintTangent_5 = Sketch_1.setTangent(SketchLine_17.result(), SketchArc_7.results()[1])
 200 SketchConstraintRadius_3 = Sketch_1.setRadius(SketchArc_7.results()[1], 9)
 201 SketchConstraintRadius_3.setName("SketchConstraintRadius_4")
 202 SketchConstraintLength_4 = Sketch_1.setLength(SketchLine_20.result(), 65)
 203 SketchLine_21 = Sketch_1.addLine(12.63997893808557, 173.9901287474201, 12.63997893808557, 192.2067667108204)
 204 SketchLine_21.setName("SketchLine_22")
 205 SketchLine_21.result().setName("SketchLine_22")
 206 SketchLine_21.setAuxiliary(True)
 207 SketchConstraintCoincidence_54 = Sketch_1.setCoincident(SketchLine_16.endPoint(), SketchLine_21.startPoint())
 208 SketchConstraintCoincidence_54.setName("SketchConstraintCoincidence_60")
 209 SketchConstraintCoincidence_55 = Sketch_1.setCoincident(SketchArc_7.startPoint(), SketchLine_21.startPoint())
 210 SketchConstraintCoincidence_55.setName("SketchConstraintCoincidence_61")
 211 SketchConstraintVertical_6 = Sketch_1.setVertical(SketchLine_21.result())
 212 SketchConstraintLength_5 = Sketch_1.setLength(SketchLine_16.result(), 20)
 213 SketchArc_8 = Sketch_1.addArc(12.63995378957197, 164.9901287474201, -5.360046210428025, 165.0000679958514, 12.63997893808557, 182.9901314915493, True)
 214 SketchConstraintCoincidence_56 = Sketch_1.setCoincident(SketchArc_7.center(), SketchArc_8.center())
 215 SketchConstraintCoincidence_56.setName("SketchConstraintCoincidence_63")
 216 SketchConstraintCoincidence_57 = Sketch_1.setCoincident(SketchLine_19.endPoint(), SketchArc_8.startPoint())
 217 SketchConstraintCoincidence_57.setName("SketchConstraintCoincidence_65")
 218 SketchConstraintCoincidence_58 = Sketch_1.setCoincident(SketchLine_20.startPoint(), SketchArc_8.startPoint())
 219 SketchConstraintCoincidence_58.setName("SketchConstraintCoincidence_66")
 220 SketchConstraintCoincidence_59 = Sketch_1.setCoincident(SketchArc_8.endPoint(), SketchLine_21.result())
 221 SketchConstraintCoincidence_59.setName("SketchConstraintCoincidence_67")
 222 SketchLine_22 = Sketch_1.addLine(12.63997893808557, 182.9901314915493, 18.25728991640986, 182.9901314915493)
 223 SketchLine_22.setName("SketchLine_23")
 224 SketchLine_22.result().setName("SketchLine_23")
 225 SketchConstraintCoincidence_60 = Sketch_1.setCoincident(SketchArc_8.endPoint(), SketchLine_22.startPoint())
 226 SketchConstraintCoincidence_60.setName("SketchConstraintCoincidence_64")
 227 SketchConstraintHorizontal_5 = Sketch_1.setHorizontal(SketchLine_22.result())
 228 SketchConstraintDistance_3 = Sketch_1.setDistance(SketchLine_18.startPoint(), SketchLine_19.result(), 9)
 229 SketchLine_23 = Sketch_1.addLine(18.25728991640986, 182.9901314915493, 18.25728991640986, 184.0340386082476)
 230 SketchLine_23.setName("SketchLine_24")
 231 SketchLine_23.result().setName("SketchLine_24")
 232 SketchConstraintCoincidence_61 = Sketch_1.setCoincident(SketchLine_22.endPoint(), SketchLine_23.startPoint())
 233 SketchConstraintCoincidence_61.setName("SketchConstraintCoincidence_62")
 234 SketchConstraintCoincidence_62 = Sketch_1.setCoincident(SketchLine_10.endPoint(), SketchLine_23.endPoint())
 235 SketchConstraintCoincidence_62.setName("SketchConstraintCoincidence_68")
 236 SketchConstraintVertical_7 = Sketch_1.setVertical(SketchLine_23.result())
 237 model.do()
 238 Revolution_1 = model.addRevolution(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchLine_2r-SketchArc_1_2r-SketchLine_3r-SketchArc_2_2r-SketchArc_3_2f-SketchLine_8f-SketchLine_10f-SketchArc_5_2f-SketchLine_12f-SketchArc_6_2r-SketchLine_14r-SketchLine_16r-SketchArc_7_2r-SketchLine_17r-SketchLine_18r-SketchLine_20f-SketchArc_8_2f-SketchLine_23r-SketchArc_10_2f-SketchLine_24r")], model.selection("EDGE", "PartSet/OX"), 360, 0)
 239 Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("YOZ"))
 240 SketchCircle_1 = Sketch_2.addCircle(0, 120, 7.5)
 241 SketchLine_24 = Sketch_2.addLine(model.selection("EDGE", "PartSet/OZ"))
 242 SketchLine_24.setName("SketchLine_25")
 243 SketchLine_24.result().setName("SketchLine_25")
 244 SketchConstraintCoincidence_63 = Sketch_2.setCoincident(SketchCircle_1.center(), SketchLine_24.result())
 245 SketchConstraintCoincidence_63.setName("SketchConstraintCoincidence_69")
 246 SketchLine_25 = Sketch_2.addLine(model.selection("EDGE", "PartSet/OY"))
 247 SketchLine_25.setName("SketchLine_26")
 248 SketchLine_25.result().setName("SketchLine_26")
 249 SketchConstraintDistance_4 = Sketch_2.setDistance(SketchCircle_1.center(), SketchLine_25.result(), 120)
 250 SketchConstraintRadius_4 = Sketch_2.setRadius(SketchCircle_1.results()[1], 7.5)
 251 SketchConstraintRadius_4.setName("SketchConstraintRadius_5")
 252 SketchMultiRotation_1 = Sketch_2.addRotation([SketchCircle_1.results()[1]], SketchLine_24.startPoint(), 24, 15)
 253 [SketchCircle_2, SketchCircle_3, SketchCircle_4, SketchCircle_5, SketchCircle_6, SketchCircle_7, SketchCircle_8, SketchCircle_9, SketchCircle_10, SketchCircle_11, SketchCircle_12, SketchCircle_13, SketchCircle_14, SketchCircle_15] = SketchMultiRotation_1.rotated()
 254 model.do()
 255 Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", "Sketch_2")], model.selection(), 10, 10)
 256 Boolean_1 = model.addCut(Part_1_doc, [model.selection("SOLID", "Revolution_1_1")], [model.selection("SOLID", "Extrusion_1_6"), model.selection("SOLID", "Extrusion_1_8"), model.selection("SOLID", "Extrusion_1_9"), model.selection("SOLID", "Extrusion_1_3"), model.selection("SOLID", "Extrusion_1_2"), model.selection("SOLID", "Extrusion_1_1"), model.selection("SOLID", "Extrusion_1_4"), model.selection("SOLID", "Extrusion_1_14"), model.selection("SOLID", "Extrusion_1_5"), model.selection("SOLID", "Extrusion_1_15"), model.selection("SOLID", "Extrusion_1_11"), model.selection("SOLID", "Extrusion_1_10"), model.selection("SOLID", "Extrusion_1_12"), model.selection("SOLID", "Extrusion_1_13"), model.selection("SOLID", "Extrusion_1_7")])
 257 model.end()
 258
 259 from GeomAPI import GeomAPI_Shape
 260
 261 model.testNbResults(Boolean_1, 1)
 262 model.testNbSubResults(Boolean_1, [0])
 263 model.testNbSubShapes(Boolean_1, GeomAPI_Shape.SOLID, [1])
 264 model.testNbSubShapes(Boolean_1, GeomAPI_Shape.FACE, [35])
 265 model.testNbSubShapes(Boolean_1, GeomAPI_Shape.EDGE, [162])
 266 model.testNbSubShapes(Boolean_1, GeomAPI_Shape.VERTEX, [324])
 267 model.testResultsVolumes(Boolean_1, [2053931.913933836854994297027587891])
 268
 269 assert(model.checkPythonDump())