test.models/plug.py

   1 # Copyright (C) 2017-2019  CEA/DEN, EDF R&D
   2 #
   3 # This library is free software; you can redistribute it and/or
   4 # modify it under the terms of the GNU Lesser General Public
   5 # License as published by the Free Software Foundation; either
   6 # version 2.1 of the License, or (at your option) any later version.
   7 #
   8 # This library is distributed in the hope that it will be useful,
   9 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  10 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  11 # Lesser General Public License for more details.
  12 #
  13 # You should have received a copy of the GNU Lesser General Public
  14 # License along with this library; if not, write to the Free Software
  15 # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  16 #
  17 # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
  18 #
  19
  20 from SketchAPI import *
  21 from GeomAPI import GeomAPI_Shape
  22
  23 from salome.shaper import model
  24
  25 model.begin()
  26 partSet = model.moduleDocument()
  27 Part_1 = model.addPart(partSet)
  28 Part_1_doc = Part_1.document()
  29
  30 Param_Width = model.addParameter(Part_1_doc, "Width", "64")
  31 Param_Depth = model.addParameter(Part_1_doc, "Depth", "33")
  32 Param_D1out = model.addParameter(Part_1_doc, "D1_out", "38")
  33 Param_D2out = model.addParameter(Part_1_doc, "D2_out", "33")
  34 Param_D3out = model.addParameter(Part_1_doc, "D3_out", "30")
  35 Param_D4out = model.addParameter(Part_1_doc, "D4_out", "20")
  36 Param_D1in = model.addParameter(Part_1_doc, "D1_in", "21")
  37 Param_D2in = model.addParameter(Part_1_doc, "D2_in", "5")
  38 Param_ChannelDepth = model.addParameter(Part_1_doc, "Channel_Depth", "1.3")
  39 Param_ChannelWidth = model.addParameter(Part_1_doc, "Channel_Width", "1.5")
  40 Param_Drill1Loc = model.addParameter(Part_1_doc, "Drill1_Loc", "7.5")
  41 Param_Drill1Radius = model.addParameter(Part_1_doc, "Drill1_Radius", "2.25")
  42 Param_Drill1Holder = model.addParameter(Part_1_doc, "Drill1Holder_Width", "8")
  43 Param_Drill2Loc = model.addParameter(Part_1_doc, "Drill2_Loc", "6.5")
  44 Param_Drill2Radius = model.addParameter(Part_1_doc, "Drill2_Radius", "1.4")
  45 Param_Drill2InnerRadius = model.addParameter(Part_1_doc, "Drill2_InnerRadius", "0.5")
  46 Param_Drill2DepthMin = model.addParameter(Part_1_doc, "Drill2_DepthMin", "6.5")
  47 Param_Drill2DepthMax = model.addParameter(Part_1_doc, "Drill2_DepthMax", "7.5")
  48 Param_Chamfer = model.addParameter(Part_1_doc, "Chamfer", "0.5")
  49 Param_Fillet1 = model.addParameter(Part_1_doc, "Fillet1", "5")
  50 Param_Fillet2 = model.addParameter(Part_1_doc, "Fillet2", "0.3")
  51 Param_Fillet3 = model.addParameter(Part_1_doc, "Fillet3", "0.5")
  52 Param_SlotWidth = model.addParameter(Part_1_doc, "Slot_Width", "8")
  53
  54 Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
  55 SketchLine_1 = Sketch_1.addLine(0, 3, 0.5, 2.5)
  56 SketchLine_2 = Sketch_1.addLine(0.5, 2.5, 9.5, 2.5)
  57 SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
  58 SketchLine_3 = Sketch_1.addLine(9.5, 2.5, 9.5, 3.1)
  59 SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
  60 SketchLine_4 = Sketch_1.addLine(9.5, 3.1, 24.86574363608673, 3.1)
  61 SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
  62 SketchLine_5 = Sketch_1.addLine(24.86574363608673, 3.1, 26, 3.3)
  63 SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_5.startPoint())
  64 SketchLine_6 = Sketch_1.addLine(26, 3.3, 26, 5.5)
  65 SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_5.endPoint(), SketchLine_6.startPoint())
  66 SketchLine_7 = Sketch_1.addLine(31, 10.5, 64, 10.5)
  67 SketchLine_8 = Sketch_1.addLine(64, 10.5, 64, 15)
  68 SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_7.endPoint(), SketchLine_8.startPoint())
  69 SketchLine_9 = Sketch_1.addLine(64, 15, 61, 15)
  70 SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchLine_8.endPoint(), SketchLine_9.startPoint())
  71 SketchLine_10 = Sketch_1.addLine(61, 15, 61, 12.75)
  72 SketchConstraintCoincidence_8 = Sketch_1.setCoincident(SketchLine_9.endPoint(), SketchLine_10.startPoint())
  73 SketchLine_11 = Sketch_1.addLine(61, 12.75, 58, 12.75)
  74 SketchConstraintCoincidence_9 = Sketch_1.setCoincident(SketchLine_10.endPoint(), SketchLine_11.startPoint())
  75 SketchLine_12 = Sketch_1.addLine(58, 12.75, 58, 14)
  76 SketchConstraintCoincidence_10 = Sketch_1.setCoincident(SketchLine_11.endPoint(), SketchLine_12.startPoint())
  77 SketchLine_13 = Sketch_1.addLine(58, 14, 57, 15)
  78 SketchConstraintCoincidence_11 = Sketch_1.setCoincident(SketchLine_12.endPoint(), SketchLine_13.startPoint())
  79 SketchLine_14 = Sketch_1.addLine(57, 15, 54, 15)
  80 SketchConstraintCoincidence_12 = Sketch_1.setCoincident(SketchLine_13.endPoint(), SketchLine_14.startPoint())
  81 SketchLine_15 = Sketch_1.addLine(54, 15, 52.5, 16.5)
  82 SketchConstraintCoincidence_13 = Sketch_1.setCoincident(SketchLine_14.endPoint(), SketchLine_15.startPoint())
  83 SketchLine_16 = Sketch_1.addLine(52.5, 16.5, 35, 16.5)
  84 SketchConstraintCoincidence_14 = Sketch_1.setCoincident(SketchLine_15.endPoint(), SketchLine_16.startPoint())
  85 SketchLine_17 = Sketch_1.addLine(35, 16.5, 34, 15.5)
  86 SketchConstraintCoincidence_15 = Sketch_1.setCoincident(SketchLine_16.endPoint(), SketchLine_17.startPoint())
  87 SketchLine_18 = Sketch_1.addLine(34, 15.5, 32, 15.5)
  88 SketchConstraintCoincidence_16 = Sketch_1.setCoincident(SketchLine_17.endPoint(), SketchLine_18.startPoint())
  89 SketchLine_19 = Sketch_1.addLine(32, 15.5, 32, 19)
  90 SketchConstraintCoincidence_17 = Sketch_1.setCoincident(SketchLine_18.endPoint(), SketchLine_19.startPoint())
  91 SketchLine_20 = Sketch_1.addLine(32, 19, 22.5, 19)
  92 SketchConstraintCoincidence_18 = Sketch_1.setCoincident(SketchLine_19.endPoint(), SketchLine_20.startPoint())
  93 SketchLine_21 = Sketch_1.addLine(22.5, 19, 22.5, 13)
  94 SketchConstraintCoincidence_19 = Sketch_1.setCoincident(SketchLine_20.endPoint(), SketchLine_21.startPoint())
  95 SketchLine_22 = Sketch_1.addLine(22.5, 13, 22, 12.5)
  96 SketchConstraintCoincidence_20 = Sketch_1.setCoincident(SketchLine_21.endPoint(), SketchLine_22.startPoint())
  97 SketchLine_23 = Sketch_1.addLine(22, 12.5, 22, 10)
  98 SketchConstraintCoincidence_21 = Sketch_1.setCoincident(SketchLine_22.endPoint(), SketchLine_23.startPoint())
  99 SketchLine_24 = Sketch_1.addLine(22, 10, 20, 10)
 100 SketchConstraintCoincidence_22 = Sketch_1.setCoincident(SketchLine_23.endPoint(), SketchLine_24.startPoint())
 101 SketchLine_25 = Sketch_1.addLine(20, 10, 20, 8.7)
 102 SketchConstraintCoincidence_23 = Sketch_1.setCoincident(SketchLine_24.endPoint(), SketchLine_25.startPoint())
 103 SketchLine_26 = Sketch_1.addLine(20, 8.7, 18.5, 8.7)
 104 SketchConstraintCoincidence_24 = Sketch_1.setCoincident(SketchLine_25.endPoint(), SketchLine_26.startPoint())
 105 SketchLine_27 = Sketch_1.addLine(18.5, 8.7, 18.5, 10)
 106 SketchConstraintCoincidence_25 = Sketch_1.setCoincident(SketchLine_26.endPoint(), SketchLine_27.startPoint())
 107 SketchLine_28 = Sketch_1.addLine(18.5, 10, 10.5, 10)
 108 SketchConstraintCoincidence_26 = Sketch_1.setCoincident(SketchLine_27.endPoint(), SketchLine_28.startPoint())
 109 SketchLine_29 = Sketch_1.addLine(10.5, 10, 10.5, 8.7)
 110 SketchConstraintCoincidence_27 = Sketch_1.setCoincident(SketchLine_28.endPoint(), SketchLine_29.startPoint())
 111 SketchLine_30 = Sketch_1.addLine(10.5, 8.7, 9, 8.7)
 112 SketchConstraintCoincidence_28 = Sketch_1.setCoincident(SketchLine_29.endPoint(), SketchLine_30.startPoint())
 113 SketchLine_31 = Sketch_1.addLine(9, 8.7, 9, 10)
 114 SketchConstraintCoincidence_29 = Sketch_1.setCoincident(SketchLine_30.endPoint(), SketchLine_31.startPoint())
 115 SketchLine_32 = Sketch_1.addLine(9, 10, 0.5, 10)
 116 SketchConstraintCoincidence_30 = Sketch_1.setCoincident(SketchLine_31.endPoint(), SketchLine_32.startPoint())
 117 SketchLine_33 = Sketch_1.addLine(0.5, 10, 0, 9.5)
 118 SketchConstraintCoincidence_31 = Sketch_1.setCoincident(SketchLine_32.endPoint(), SketchLine_33.startPoint())
 119 SketchLine_34 = Sketch_1.addLine(0, 9.5, 0, 3)
 120 SketchConstraintCoincidence_32 = Sketch_1.setCoincident(SketchLine_33.endPoint(), SketchLine_34.startPoint())
 121 SketchConstraintCoincidence_33 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchLine_34.endPoint())
 122 SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_2.result())
 123 SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_3.result())
 124 SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_4.result())
 125 SketchConstraintAngle_1 = Sketch_1.setAngleComplementary(SketchLine_4.result(), SketchLine_5.result(), 10)
 126 SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_6.result())
 127 SketchConstraintHorizontal_3 = Sketch_1.setHorizontal(SketchLine_7.result())
 128 SketchProjection_1 = Sketch_1.addProjection(model.selection("VERTEX", "PartSet/Origin"), False)
 129 SketchPoint_1 = SketchProjection_1.createdFeature()
 130 SketchConstraintDistanceVertical_1 = Sketch_1.setVerticalDistance(SketchAPI_Point(SketchPoint_1).coordinates(), SketchLine_1.endPoint(), "D2_in/2")
 131 SketchConstraintVertical_3 = Sketch_1.setVertical(SketchLine_8.result())
 132 SketchConstraintHorizontal_4 = Sketch_1.setHorizontal(SketchLine_9.result())
 133 SketchConstraintParallel_1 = Sketch_1.setParallel(SketchLine_16.result(), SketchLine_7.result())
 134 SketchConstraintAngle_2 = Sketch_1.setAngleComplementary(SketchLine_15.result(), SketchLine_16.result(), 45)
 135 SketchConstraintAngle_3 = Sketch_1.setAngleComplementary(SketchLine_13.result(), SketchLine_14.result(), 45)
 136 SketchConstraintVertical_4 = Sketch_1.setVertical(SketchLine_12.result())
 137 SketchConstraintVertical_5 = Sketch_1.setVertical(SketchLine_10.result())
 138 SketchConstraintHorizontal_5 = Sketch_1.setHorizontal(SketchLine_11.result())
 139 SketchConstraintPerpendicular_1 = Sketch_1.setPerpendicular(SketchLine_17.result(), SketchLine_15.result())
 140 SketchConstraintVertical_6 = Sketch_1.setVertical(SketchLine_19.result())
 141 SketchConstraintHorizontal_6 = Sketch_1.setHorizontal(SketchLine_18.result())
 142 SketchConstraintParallel_2 = Sketch_1.setParallel(SketchLine_20.result(), SketchLine_7.result())
 143 SketchConstraintParallel_3 = Sketch_1.setParallel(SketchLine_21.result(), SketchLine_19.result())
 144 SketchConstraintVertical_7 = Sketch_1.setVertical(SketchLine_23.result())
 145 SketchConstraintHorizontal_7 = Sketch_1.setHorizontal(SketchLine_24.result())
 146 SketchConstraintCollinear_1 = Sketch_1.setCollinear(SketchLine_28.result(), SketchLine_24.result())
 147 SketchConstraintCollinear_2 = Sketch_1.setCollinear(SketchLine_32.result(), SketchLine_28.result())
 148 SketchConstraintVertical_8 = Sketch_1.setVertical(SketchLine_34.result())
 149 SketchConstraintHorizontal_8 = Sketch_1.setHorizontal(SketchLine_30.result())
 150 SketchConstraintCollinear_3 = Sketch_1.setCollinear(SketchLine_26.result(), SketchLine_30.result())
 151 SketchConstraintVertical_9 = Sketch_1.setVertical(SketchLine_31.result())
 152 SketchConstraintVertical_10 = Sketch_1.setVertical(SketchLine_29.result())
 153 SketchConstraintVertical_11 = Sketch_1.setVertical(SketchLine_27.result())
 154 SketchConstraintVertical_12 = Sketch_1.setVertical(SketchLine_25.result())
 155 SketchConstraintDistance_1 = Sketch_1.setDistance(SketchAPI_Point(SketchPoint_1).coordinates(), SketchLine_24.result(), "D4_out/2", True)
 156 SketchConstraintDistance_2 = Sketch_1.setDistance(SketchAPI_Point(SketchPoint_1).coordinates(), SketchLine_30.result(), "D4_out/2-Channel_Depth", True)
 157 SketchConstraintDistanceHorizontal_1 = Sketch_1.setHorizontalDistance(SketchLine_34.endPoint(), SketchLine_1.endPoint(), "Chamfer")
 158 SketchConstraintDistanceVertical_2 = Sketch_1.setVerticalDistance(SketchLine_1.endPoint(), SketchLine_1.startPoint(), "Chamfer")
 159 SketchConstraintDistanceHorizontal_2 = Sketch_1.setHorizontalDistance(SketchLine_34.startPoint(), SketchLine_33.startPoint(), "Chamfer")
 160 SketchConstraintDistanceVertical_3 = Sketch_1.setVerticalDistance(SketchLine_34.startPoint(), SketchLine_33.startPoint(), "Chamfer")
 161 SketchProjection_2 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OX"), False)
 162 SketchLine_35 = SketchProjection_2.createdFeature()
 163 SketchConstraintDistance_3 = Sketch_1.setDistance(SketchLine_3.endPoint(), SketchLine_35.result(), "D2_in/2+0.6", True)
 164 SketchConstraintDistanceHorizontal_3 = Sketch_1.setHorizontalDistance(SketchLine_3.endPoint(), SketchLine_5.endPoint(), "Depth/2")
 165 SketchConstraintDistance_4 = Sketch_1.setDistance(SketchLine_5.endPoint(), SketchLine_35.result(), "D2_in/2+0.8", True)
 166 SketchArc_1 = Sketch_1.addArc(31, 5.5, 31, 10.5, 26, 5.5, False)
 167 SketchConstraintCoincidence_34 = Sketch_1.setCoincident(SketchArc_1.startPoint(), SketchLine_7.startPoint())
 168 SketchConstraintCoincidence_35 = Sketch_1.setCoincident(SketchArc_1.endPoint(), SketchLine_6.endPoint())
 169 SketchConstraintTangent_1 = Sketch_1.setTangent(SketchArc_1.results()[1], SketchLine_7.result())
 170 SketchConstraintTangent_2 = Sketch_1.setTangent(SketchArc_1.results()[1], SketchLine_6.result())
 171 SketchConstraintRadius_1 = Sketch_1.setRadius(SketchArc_1.results()[1], "Fillet1")
 172 SketchConstraintDistance_5 = Sketch_1.setDistance(SketchLine_7.endPoint(), SketchLine_35.result(), "D1_in/2", True)
 173 SketchConstraintAngle_4 = Sketch_1.setAngleComplementary(SketchLine_23.result(), SketchLine_22.result(), 45)
 174 SketchConstraintCollinear_4 = Sketch_1.setCollinear(SketchLine_14.result(), SketchLine_9.result())
 175 SketchConstraintDistanceHorizontal_4 = Sketch_1.setHorizontalDistance(SketchLine_34.startPoint(), SketchLine_23.startPoint(), "Width/32*11")
 176 SketchConstraintDistanceHorizontal_5 = Sketch_1.setHorizontalDistance(SketchLine_23.startPoint(), SketchLine_22.startPoint(), "Chamfer")
 177 SketchConstraintDistanceHorizontal_6 = Sketch_1.setHorizontalDistance(SketchLine_15.startPoint(), SketchLine_8.endPoint(), 10)
 178 SketchConstraintDistance_6 = Sketch_1.setDistance(SketchLine_8.endPoint(), SketchLine_35.result(), "D3_out/2", True)
 179 SketchConstraintDistance_7 = Sketch_1.setDistance(SketchLine_11.startPoint(), SketchLine_35.result(), "(D3_out+D1_in)/4", True)
 180 SketchConstraintDistanceHorizontal_7 = Sketch_1.setHorizontalDistance(SketchLine_10.startPoint(), SketchLine_8.endPoint(), 3)
 181 SketchConstraintDistanceHorizontal_8 = Sketch_1.setHorizontalDistance(SketchLine_12.endPoint(), SketchLine_10.startPoint(), 3)
 182 SketchConstraintEqual_1 = Sketch_1.setEqual(SketchLine_30.result(), SketchLine_26.result())
 183 SketchConstraintLength_1 = Sketch_1.setLength(SketchLine_26.result(), "Channel_Width")
 184 SketchConstraintLength_2 = Sketch_1.setLength(SketchLine_28.result(), "Drill1Holder_Width")
 185 SketchConstraintDistanceHorizontal_9 = Sketch_1.setHorizontalDistance(SketchArc_1.center(), SketchLine_7.endPoint(), "Depth")
 186 SketchConstraintDistance_8 = Sketch_1.setDistance(SketchLine_16.startPoint(), SketchLine_35.result(), "D2_out/2", True)
 187 SketchConstraintDistanceHorizontal_10 = Sketch_1.setHorizontalDistance(SketchLine_20.startPoint(), SketchLine_8.endPoint(), "Width/2")
 188 SketchConstraintDistance_9 = Sketch_1.setDistance(SketchLine_17.endPoint(), SketchLine_35.result(), "D2_out/2-1", True)
 189 SketchConstraintDistanceHorizontal_11 = Sketch_1.setHorizontalDistance(SketchLine_20.startPoint(), SketchLine_17.endPoint(), 2)
 190 SketchConstraintCoincidence_36 = Sketch_1.setCoincident(SketchAPI_Line(SketchLine_35).startPoint(), SketchLine_34.result())
 191 SketchConstraintDistance_10 = Sketch_1.setDistance(SketchAPI_Line(SketchLine_35).startPoint(), SketchLine_20.result(), "D1_out/2", True)
 192 SketchPoint_2 = Sketch_1.addPoint(14.5, 10)
 193 SketchConstraintCoincidence_37 = Sketch_1.setCoincident(SketchPoint_2.coordinates(), SketchLine_28.result())
 194 SketchConstraintMiddle_1 = Sketch_1.setMiddlePoint(SketchPoint_2.coordinates(), SketchLine_28.result())
 195 SketchConstraintDistanceHorizontal_12 = Sketch_1.setHorizontalDistance(SketchPoint_2.coordinates(), SketchLine_24.startPoint(), "Drill1_Loc")
 196 SketchConstraintDistanceHorizontal_13 = Sketch_1.setHorizontalDistance(SketchLine_34.startPoint(), SketchLine_9.startPoint(), "Width")
 197 SketchConstraintDistanceHorizontal_14 = Sketch_1.setHorizontalDistance(SketchLine_14.startPoint(), SketchLine_12.endPoint(), 1)
 198 SketchConstraintDistance_11 = Sketch_1.setDistance(SketchLine_23.startPoint(), SketchLine_35.result(), "(D4_out+D2_in)/2", True)
 199 model.do()
 200 # check Sketch_1
 201 model.checkSketch(Sketch_1, 0)
 202
 203 Revolution_1 = model.addRevolution(Part_1_doc, [model.selection("COMPOUND", "Sketch_1")], model.selection("EDGE", "PartSet/OX"), 360, 0)
 204 # check Revolution_1
 205 model.testNbResults(Revolution_1, 1)
 206 model.testNbSubResults(Revolution_1, [0])
 207 model.testNbSubShapes(Revolution_1, GeomAPI_Shape.SOLID, [1])
 208 model.testNbSubShapes(Revolution_1, GeomAPI_Shape.FACE, [35])
 209 model.testNbSubShapes(Revolution_1, GeomAPI_Shape.EDGE, [114])
 210 model.testNbSubShapes(Revolution_1, GeomAPI_Shape.VERTEX, [228])
 211 model.testResultsVolumes(Revolution_1, [29055.346994571114919381216168404])
 212
 213 Plane_4 = model.addPlane(Part_1_doc, model.selection("EDGE", "PartSet/OY"), model.selection("VERTEX", "Sketch_1/SketchPoint_2"), True)
 214
 215 Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Plane_1"))
 216 SketchProjection_3 = Sketch_2.addProjection(model.selection("VERTEX", "Sketch_1/SketchPoint_2"), False)
 217 SketchPoint_3 = SketchProjection_3.createdFeature()
 218 SketchProjection_4 = Sketch_2.addProjection(model.selection("EDGE", "([Revolution_1_1/Generated_Face&Sketch_1/SketchArc_1_2][Revolution_1_1/Generated_Face&Sketch_1/SketchLine_7])([Revolution_1_1/Generated_Face&Sketch_1/SketchLine_7][Revolution_1_1/Generated_Face&Sketch_1/SketchLine_8])"), False)
 219 SketchLine_36 = SketchProjection_4.createdFeature()
 220 SketchCircle_1 = Sketch_2.addCircle(14.5, 0, 2.25)
 221 SketchConstraintCoincidence_38 = Sketch_2.setCoincident(SketchPoint_3.result(), SketchCircle_1.center())
 222 SketchConstraintRadius_2 = Sketch_2.setRadius(SketchCircle_1.results()[1], "Drill1_Radius")
 223 model.do()
 224 # check Sketch_2
 225 model.checkSketch(Sketch_2, 0)
 226
 227 ExtrusionCut_1 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_2/Face-SketchCircle_1_2f")], model.selection(), model.selection("FACE", "PartSet/XOZ"), 0, model.selection(), 0, [model.selection("SOLID", "Revolution_1_1")])
 228 # check ExtrusionCut_1
 229 model.testNbResults(ExtrusionCut_1, 1)
 230 model.testNbSubResults(ExtrusionCut_1, [0])
 231 model.testNbSubShapes(ExtrusionCut_1, GeomAPI_Shape.SOLID, [1])
 232 model.testNbSubShapes(ExtrusionCut_1, GeomAPI_Shape.FACE, [36])
 233 model.testNbSubShapes(ExtrusionCut_1, GeomAPI_Shape.EDGE, [132])
 234 model.testNbSubShapes(ExtrusionCut_1, GeomAPI_Shape.VERTEX, [264])
 235 model.testResultsVolumes(ExtrusionCut_1, [28943.115000463178148493170738220])
 236
 237 Fillet_1 = model.addFillet(Part_1_doc, [model.selection("EDGE", "[Revolution_1_1/Generated_Face&Sketch_1/SketchLine_21][Revolution_1_1/Generated_Face&Sketch_1/SketchLine_20]")], "Fillet1")
 238 # check Fillet_1
 239 model.testNbResults(Fillet_1, 1)
 240 model.testNbSubResults(Fillet_1, [0])
 241 model.testNbSubShapes(Fillet_1, GeomAPI_Shape.SOLID, [1])
 242 model.testNbSubShapes(Fillet_1, GeomAPI_Shape.FACE, [37])
 243 model.testNbSubShapes(Fillet_1, GeomAPI_Shape.EDGE, [136])
 244 model.testNbSubShapes(Fillet_1, GeomAPI_Shape.VERTEX, [272])
 245 model.testResultsVolumes(Fillet_1, [28340.280766451105591841042041779])
 246
 247 Fillet_2 = model.addFillet(Part_1_doc, [model.selection("FACE", "Revolution_1_1/Generated_Face&Sketch_1/SketchLine_31"), model.selection("FACE", "Revolution_1_1/Generated_Face&Sketch_1/SketchLine_29"), model.selection("FACE", "Revolution_1_1/Generated_Face&Sketch_1/SketchLine_27"), model.selection("FACE", "Revolution_1_1/Generated_Face&Sketch_1/SketchLine_25")], "Fillet2")
 248 # check Fillet_2
 249 model.testNbResults(Fillet_2, 1)
 250 model.testNbSubResults(Fillet_2, [0])
 251 model.testNbSubShapes(Fillet_2, GeomAPI_Shape.SOLID, [1])
 252 model.testNbSubShapes(Fillet_2, GeomAPI_Shape.FACE, [45])
 253 model.testNbSubShapes(Fillet_2, GeomAPI_Shape.EDGE, [168])
 254 model.testNbSubShapes(Fillet_2, GeomAPI_Shape.VERTEX, [336])
 255 model.testResultsVolumes(Fillet_2, [28339.715350479829794494435191154])
 256
 257 Fillet_3 = model.addFillet(Part_1_doc, [model.selection("FACE", "Revolution_1_1/Generated_Face&Sketch_1/SketchLine_19")], "Fillet3")
 258 # check Fillet_3
 259 model.testNbResults(Fillet_3, 1)
 260 model.testNbSubResults(Fillet_3, [0])
 261 model.testNbSubShapes(Fillet_3, GeomAPI_Shape.SOLID, [1])
 262 model.testNbSubShapes(Fillet_3, GeomAPI_Shape.FACE, [47])
 263 model.testNbSubShapes(Fillet_3, GeomAPI_Shape.EDGE, [176])
 264 model.testNbSubShapes(Fillet_3, GeomAPI_Shape.VERTEX, [352])
 265 model.testResultsVolumes(Fillet_3, [28338.609830057110229972749948502])
 266
 267 Fillet_4 = model.addFillet(Part_1_doc, [model.selection("FACE", "Revolution_1_1/Generated_Face&Sketch_1/SketchLine_11")], "Fillet3")
 268 # check Fillet_4
 269 model.testNbResults(Fillet_4, 1)
 270 model.testNbSubResults(Fillet_4, [0])
 271 model.testNbSubShapes(Fillet_4, GeomAPI_Shape.SOLID, [1])
 272 model.testNbSubShapes(Fillet_4, GeomAPI_Shape.FACE, [49])
 273 model.testNbSubShapes(Fillet_4, GeomAPI_Shape.EDGE, [184])
 274 model.testNbSubShapes(Fillet_4, GeomAPI_Shape.VERTEX, [368])
 275 model.testResultsVolumes(Fillet_4, [28347.280717884430487174540758133])
 276
 277 Fillet_5 = model.addFillet(Part_1_doc, [model.selection("FACE", "Revolution_1_1/Generated_Face&Sketch_1/SketchLine_9")], "Fillet2")
 278 # check Fillet_5
 279 model.testNbResults(Fillet_5, 1)
 280 model.testNbSubResults(Fillet_5, [0])
 281 model.testNbSubShapes(Fillet_5, GeomAPI_Shape.SOLID, [1])
 282 model.testNbSubShapes(Fillet_5, GeomAPI_Shape.FACE, [51])
 283 model.testNbSubShapes(Fillet_5, GeomAPI_Shape.EDGE, [192])
 284 model.testNbSubShapes(Fillet_5, GeomAPI_Shape.VERTEX, [384])
 285 model.testResultsVolumes(Fillet_5, [28343.655816829603281803429126740])
 286
 287 ExtrusionCut_2 = model.addExtrusionCut(Part_1_doc, [], model.selection(), "D4_out/2", "D4_out/2", [model.selection("SOLID", "Fillet_5_1")])
 288 Sketch_3 = model.addSketch(Part_1_doc, model.standardPlane("XOY"))
 289 SketchLine_37 = Sketch_3.addLine(9, -9.914857089637437, 9, -18.52898094212539)
 290 SketchLine_38 = Sketch_3.addLine(9, -18.52898094212539, -2.5, -18.52898094212539)
 291 SketchConstraintCoincidence_39 = Sketch_3.setCoincident(SketchLine_37.endPoint(), SketchLine_38.startPoint())
 292 SketchLine_39 = Sketch_3.addLine(-2.5, -18.52898094212539, -2.5, -10.52898094212539)
 293 SketchConstraintCoincidence_40 = Sketch_3.setCoincident(SketchLine_38.endPoint(), SketchLine_39.startPoint())
 294 SketchLine_40 = Sketch_3.addLine(-2.5, -10.52898094212539, 7.788407623149843, -8.714857089637437)
 295 SketchConstraintCoincidence_41 = Sketch_3.setCoincident(SketchLine_39.endPoint(), SketchLine_40.startPoint())
 296 SketchLine_41 = Sketch_3.addLine(7.788407623149843, -8.714857089637437, 8, -9.914857089637437)
 297 SketchConstraintCoincidence_42 = Sketch_3.setCoincident(SketchLine_40.endPoint(), SketchLine_41.startPoint())
 298 SketchLine_42 = Sketch_3.addLine(8, -9.914857089637437, 9, -9.914857089637437)
 299 SketchConstraintCoincidence_43 = Sketch_3.setCoincident(SketchLine_41.endPoint(), SketchLine_42.startPoint())
 300 SketchConstraintCoincidence_44 = Sketch_3.setCoincident(SketchLine_42.endPoint(), SketchLine_37.startPoint())
 301 SketchProjection_5 = Sketch_3.addProjection(model.selection("EDGE", "PartSet/OX"), False)
 302 SketchLine_43 = SketchProjection_5.createdFeature()
 303 SketchProjection_6 = Sketch_3.addProjection(model.selection("EDGE", "Sketch_1/SketchLine_33"), False)
 304 SketchLine_44 = SketchProjection_6.createdFeature()
 305 SketchProjection_7 = Sketch_3.addProjection(model.selection("EDGE", "Sketch_1/SketchLine_33"), False)
 306 SketchLine_45 = SketchProjection_7.createdFeature()
 307 SketchProjection_8 = Sketch_3.addProjection(model.selection("EDGE", "Sketch_1/SketchLine_33"), False)
 308 SketchLine_46 = SketchProjection_8.createdFeature()
 309 SketchProjection_9 = Sketch_3.addProjection(model.selection("EDGE", "Sketch_1/SketchLine_32"), False)
 310 SketchLine_47 = SketchProjection_9.createdFeature()
 311 SketchProjection_10 = Sketch_3.addProjection(model.selection("EDGE", "Sketch_1/SketchLine_32"), False)
 312 SketchLine_48 = SketchProjection_10.createdFeature()
 313 SketchProjection_11 = Sketch_3.addProjection(model.selection("EDGE", "Sketch_1/SketchLine_32"), False)
 314 SketchLine_49 = SketchProjection_11.createdFeature()
 315 SketchConstraintVertical_13 = Sketch_3.setVertical(SketchLine_37.result())
 316 SketchConstraintVertical_14 = Sketch_3.setVertical(SketchLine_39.result())
 317 SketchConstraintHorizontal_9 = Sketch_3.setHorizontal(SketchLine_38.result())
 318 SketchConstraintHorizontal_10 = Sketch_3.setHorizontal(SketchLine_42.result())
 319 SketchConstraintPerpendicular_2 = Sketch_3.setPerpendicular(SketchLine_40.result(), SketchLine_41.result())
 320 SketchConstraintDistanceVertical_4 = Sketch_3.setVerticalDistance(SketchLine_42.startPoint(), SketchLine_40.endPoint(), 1.2)
 321 SketchConstraintMirror_1 = Sketch_3.addMirror(SketchLine_43.result(), [SketchLine_46.result(), SketchLine_49.result()])
 322 [SketchLine_50, SketchLine_51] = SketchConstraintMirror_1.mirrored()
 323 SketchLine_50.setAuxiliary(True)
 324 SketchLine_51.setAuxiliary(True)
 325 SketchConstraintCoincidence_45 = Sketch_3.setCoincident(SketchAPI_Line(SketchLine_51).startPoint(), SketchLine_37.result())
 326 SketchConstraintCoincidence_46 = Sketch_3.setCoincident(SketchAPI_Line(SketchLine_50).startPoint(), SketchLine_40.result())
 327 SketchConstraintAngle_5 = Sketch_3.setAngle(SketchLine_51.result(), SketchLine_40.result(), 10)
 328 SketchConstraintDistanceHorizontal_15 = Sketch_3.setHorizontalDistance(SketchAPI_Line(SketchLine_50).endPoint(), SketchLine_42.startPoint(), "Slot_Width")
 329 SketchConstraintDistanceVertical_5 = Sketch_3.setVerticalDistance(SketchLine_39.startPoint(), SketchLine_39.endPoint(), 8)
 330 SketchConstraintDistanceHorizontal_16 = Sketch_3.setHorizontalDistance(SketchLine_39.endPoint(), SketchAPI_Line(SketchLine_50).startPoint(), 3)
 331 ExtrusionCut_2.setNestedSketch(Sketch_3)
 332 model.do()
 333 # check Sketch_3
 334 model.checkSketch(Sketch_3, 0)
 335 # check ExtrusionCut_2
 336 model.testNbResults(ExtrusionCut_2, 1)
 337 model.testNbSubResults(ExtrusionCut_2, [0])
 338 model.testNbSubShapes(ExtrusionCut_2, GeomAPI_Shape.SOLID, [1])
 339 model.testNbSubShapes(ExtrusionCut_2, GeomAPI_Shape.FACE, [55])
 340 model.testNbSubShapes(ExtrusionCut_2, GeomAPI_Shape.EDGE, [214])
 341 model.testNbSubShapes(ExtrusionCut_2, GeomAPI_Shape.VERTEX, [428])
 342 model.testResultsVolumes(ExtrusionCut_2, [28317.789547563083033310249447823])
 343
 344 Folder_1 = model.addFolder(Part_1_doc, Fillet_1, Fillet_5)
 345
 346 Sketch_4 = model.addSketch(Part_1_doc, model.standardPlane("XOY"))
 347 SketchLine_52 = Sketch_4.addLine(28.5, -19.5, 28.5, 0)
 348 SketchProjection_12 = Sketch_4.addProjection(model.selection("EDGE", "PartSet/OX"), False)
 349 SketchLine_53 = SketchProjection_12.createdFeature()
 350 SketchConstraintCoincidence_47 = Sketch_4.setCoincident(SketchLine_52.endPoint(), SketchLine_53.result())
 351 SketchLine_54 = Sketch_4.addLine(28.5, 0, 29, 0)
 352 SketchConstraintCoincidence_48 = Sketch_4.setCoincident(SketchLine_52.endPoint(), SketchLine_54.startPoint())
 353 SketchConstraintCoincidence_49 = Sketch_4.setCoincident(SketchLine_54.endPoint(), SketchLine_53.result())
 354 SketchLine_55 = Sketch_4.addLine(29, 0, 29, -11.5)
 355 SketchConstraintCoincidence_50 = Sketch_4.setCoincident(SketchLine_54.endPoint(), SketchLine_55.startPoint())
 356 SketchLine_56 = Sketch_4.addLine(28.5, -19.5, 30.4, -19.5)
 357 SketchConstraintCoincidence_51 = Sketch_4.setCoincident(SketchLine_52.startPoint(), SketchLine_56.startPoint())
 358 SketchLine_57 = Sketch_4.addLine(30.4, -19.5, 29.4, -18.5)
 359 SketchConstraintCoincidence_52 = Sketch_4.setCoincident(SketchLine_56.endPoint(), SketchLine_57.startPoint())
 360 SketchLine_58 = Sketch_4.addLine(29.4, -18.5, 29.4, -12.5)
 361 SketchConstraintCoincidence_53 = Sketch_4.setCoincident(SketchLine_57.endPoint(), SketchLine_58.startPoint())
 362 SketchArc_2 = Sketch_4.addArc(27.95, -12.5, 29.4, -12.5, 29, -11.5, False)
 363 SketchConstraintCoincidence_54 = Sketch_4.setCoincident(SketchLine_58.endPoint(), SketchArc_2.startPoint())
 364 SketchConstraintCoincidence_55 = Sketch_4.setCoincident(SketchLine_55.endPoint(), SketchArc_2.endPoint())
 365 SketchConstraintVertical_15 = Sketch_4.setVertical(SketchLine_52.result())
 366 SketchConstraintVertical_16 = Sketch_4.setVertical(SketchLine_55.result())
 367 SketchConstraintVertical_17 = Sketch_4.setVertical(SketchLine_58.result())
 368 SketchConstraintHorizontal_11 = Sketch_4.setHorizontal(SketchLine_56.result())
 369 SketchProjection_13 = Sketch_4.addProjection(model.selection("VERTEX", "Sketch_1/SketchLine_23_EndVertex"), False)
 370 SketchPoint_4 = SketchProjection_13.createdFeature()
 371 SketchConstraintDistanceHorizontal_17 = Sketch_4.setHorizontalDistance(SketchAPI_Point(SketchPoint_4).coordinates(), SketchLine_52.endPoint(), "Drill2_Loc")
 372 SketchConstraintDistanceHorizontal_18 = Sketch_4.setHorizontalDistance(SketchLine_54.startPoint(), SketchLine_54.endPoint(), "Drill2_InnerRadius")
 373 SketchProjection_14 = Sketch_4.addProjection(model.selection("EDGE", "Sketch_1/SketchLine_20"), False)
 374 SketchLine_59 = SketchProjection_14.createdFeature()
 375 SketchConstraintAngle_6 = Sketch_4.setAngle(SketchLine_57.result(), SketchLine_56.result(), 45)
 376 SketchConstraintMirror_2 = Sketch_4.addMirror(SketchLine_53.result(), [SketchLine_59.result()])
 377 [SketchLine_60] = SketchConstraintMirror_2.mirrored()
 378 SketchLine_60.setAuxiliary(True)
 379 SketchConstraintDistance_12 = Sketch_4.setDistance(SketchArc_2.endPoint(), SketchLine_60.result(), "Drill2_DepthMax", True)
 380 SketchConstraintDistance_13 = Sketch_4.setDistance(SketchLine_58.endPoint(), SketchLine_60.result(), "Drill2_DepthMin", True)
 381 SketchConstraintDistance_14 = Sketch_4.setDistance(SketchLine_57.endPoint(), SketchLine_60.result(), 0.5, True)
 382 SketchConstraintTangent_3 = Sketch_4.setTangent(SketchLine_58.result(), SketchArc_2.results()[1])
 383 SketchPoint_5 = Sketch_4.addPoint(29.9, -19)
 384 SketchConstraintCoincidence_56 = Sketch_4.setCoincident(SketchPoint_5.coordinates(), SketchLine_60.result())
 385 SketchConstraintCoincidence_57 = Sketch_4.setCoincident(SketchPoint_5.coordinates(), SketchLine_57.result())
 386 SketchConstraintDistance_15 = Sketch_4.setDistance(SketchPoint_5.coordinates(), SketchLine_52.result(), "Drill2_Radius", True)
 387 SketchConstraintDistanceVertical_6 = Sketch_4.setVerticalDistance(SketchLine_56.endPoint(), SketchPoint_5.coordinates(), 0.5)
 388 model.do()
 389 # check Sketch_4
 390 model.checkSketch(Sketch_4, 0)
 391
 392 RevolutionCut_1 = model.addRevolutionCut(Part_1_doc, [model.selection("FACE", "Sketch_4/Face-SketchLine_56f-SketchLine_57f-SketchLine_58f-SketchArc_2_2f-SketchLine_55r-SketchLine_54r-SketchLine_52r")], model.selection("EDGE", "Sketch_4/SketchLine_52"), 360, 0, [model.selection("SOLID", "ExtrusionCut_2_1")])
 393 # check RevolutionCut_1
 394 model.testNbResults(RevolutionCut_1, 1)
 395 model.testNbSubResults(RevolutionCut_1, [0])
 396 model.testNbSubShapes(RevolutionCut_1, GeomAPI_Shape.SOLID, [1])
 397 model.testNbSubShapes(RevolutionCut_1, GeomAPI_Shape.FACE, [59])
 398 model.testNbSubShapes(RevolutionCut_1, GeomAPI_Shape.EDGE, [242])
 399 model.testNbSubShapes(RevolutionCut_1, GeomAPI_Shape.VERTEX, [484])
 400 model.testResultsVolumes(RevolutionCut_1, [28297.246041844206047244369983673])
 401
 402 RevolutionCut_2 = model.addRevolutionCut(Part_1_doc, [], model.selection("EDGE", "PartSet/OX"), 360, 0, [model.selection("SOLID", "RevolutionCut_1_1")])
 403 Sketch_5 = model.addSketch(Part_1_doc, model.standardPlane("XOY"))
 404 SketchLine_61 = Sketch_5.addLine(63.5, 10.5, 64, 10.5)
 405 SketchLine_61.setAuxiliary(True)
 406 SketchProjection_15 = Sketch_5.addProjection(model.selection("EDGE", "Sketch_1/SketchLine_7"), False)
 407 SketchLine_62 = SketchProjection_15.createdFeature()
 408 SketchConstraintCoincidence_58 = Sketch_5.setCoincident(SketchLine_61.startPoint(), SketchLine_62.result())
 409 SketchConstraintCoincidence_59 = Sketch_5.setCoincident(SketchAPI_Line(SketchLine_62).endPoint(), SketchLine_61.endPoint())
 410 SketchLine_63 = Sketch_5.addLine(64.25, 10.25, 64.25, 11.25)
 411 SketchLine_64 = Sketch_5.addLine(64.25, 11.25, 63.25, 10.25)
 412 SketchConstraintCoincidence_60 = Sketch_5.setCoincident(SketchLine_63.endPoint(), SketchLine_64.startPoint())
 413 SketchConstraintLength_3 = Sketch_5.setLength(SketchLine_61.result(), "Chamfer")
 414 SketchConstraintCoincidence_61 = Sketch_5.setCoincident(SketchLine_61.startPoint(), SketchLine_64.result())
 415 SketchLine_65 = Sketch_5.addLine(63.25, 10.25, 64.25, 10.25)
 416 SketchConstraintCoincidence_62 = Sketch_5.setCoincident(SketchLine_64.endPoint(), SketchLine_65.startPoint())
 417 SketchConstraintCoincidence_63 = Sketch_5.setCoincident(SketchLine_63.startPoint(), SketchLine_65.endPoint())
 418 SketchConstraintEqual_2 = Sketch_5.setEqual(SketchLine_65.result(), SketchLine_63.result())
 419 SketchConstraintVertical_18 = Sketch_5.setVertical(SketchLine_63.result())
 420 SketchConstraintHorizontal_12 = Sketch_5.setHorizontal(SketchLine_65.result())
 421 SketchConstraintDistanceVertical_7 = Sketch_5.setVerticalDistance(SketchLine_65.startPoint(), SketchLine_61.startPoint(), "Chamfer/2")
 422 SketchConstraintDistanceVertical_8 = Sketch_5.setVerticalDistance(SketchLine_61.startPoint(), SketchLine_63.endPoint(), "Chamfer*1.5")
 423 RevolutionCut_2.setNestedSketch(Sketch_5)
 424 model.do()
 425 # check Sketch_5
 426 model.checkSketch(Sketch_5, 0)
 427 # check RevolutionCut_2
 428 model.testNbResults(RevolutionCut_2, 1)
 429 model.testNbSubResults(RevolutionCut_2, [0])
 430 model.testNbSubShapes(RevolutionCut_2, GeomAPI_Shape.SOLID, [1])
 431 model.testNbSubShapes(RevolutionCut_2, GeomAPI_Shape.FACE, [60])
 432 model.testNbSubShapes(RevolutionCut_2, GeomAPI_Shape.EDGE, [246])
 433 model.testNbSubShapes(RevolutionCut_2, GeomAPI_Shape.VERTEX, [492])
 434 model.testResultsVolumes(RevolutionCut_2, [28288.868184623894194373860955238])
 435
 436 Plane_5 = model.addPlane(Part_1_doc, model.selection("FACE", "PartSet/XOY"), 0, False)
 437 Partition_1 = model.addPartition(Part_1_doc, [model.selection("SOLID", "RevolutionCut_2_1"), model.selection("FACE", "Plane_2")])
 438 # check Partition_1
 439 model.testNbResults(Partition_1, 1)
 440 model.testNbSubResults(Partition_1, [2])
 441 model.testNbSubShapes(Partition_1, GeomAPI_Shape.SOLID, [2])
 442 model.testNbSubShapes(Partition_1, GeomAPI_Shape.FACE, [127])
 443 model.testNbSubShapes(Partition_1, GeomAPI_Shape.EDGE, [738])
 444 model.testNbSubShapes(Partition_1, GeomAPI_Shape.VERTEX, [1476])
 445 model.testResultsVolumes(Partition_1, [28288.886256640704232268035411835])
 446
 447 Result = model.addRemoveSubShapes(Part_1_doc, model.selection("COMPSOLID", "Partition_1_1"))
 448 Result.setSubShapesToRemove([model.selection("SOLID", "Partition_1_1_2")])
 449 Result.result().setName("Plug")
 450 # check Remove_SubShapes_1
 451 model.testNbResults(Result, 1)
 452 model.testNbSubResults(Result, [0])
 453 model.testNbSubShapes(Result, GeomAPI_Shape.SOLID, [1])
 454 model.testNbSubShapes(Result, GeomAPI_Shape.FACE, [63])
 455 model.testNbSubShapes(Result, GeomAPI_Shape.EDGE, [366])
 456 model.testNbSubShapes(Result, GeomAPI_Shape.VERTEX, [732])
 457 model.testResultsVolumes(Result, [14144.443128843522572424262762070])
 458
 459 model.do()
 460
 461 # change parameters of the model
 462 Param_Width.setValue(100)
 463 model.do()
 464 model.testNbResults(Result, 1)
 465 model.testNbSubResults(Result, [0])
 466 model.testNbSubShapes(Result, GeomAPI_Shape.SOLID, [1])
 467 model.testNbSubShapes(Result, GeomAPI_Shape.FACE, [63])
 468 model.testNbSubShapes(Result, GeomAPI_Shape.EDGE, [364])
 469 model.testNbSubShapes(Result, GeomAPI_Shape.VERTEX, [728])
 470 model.testResultsVolumes(Result, [26613.145838412528974004089832306])
 471
 472 # do small steps in parameter here to avoid "conflicting constraints" message coming from PlaneGCS
 473 Param_Depth.setValue(40)
 474 model.do()
 475 Param_Depth.setValue(50)
 476 model.do()
 477 Param_Depth.setValue(55)
 478 model.do()
 479 model.testNbResults(Result, 1)
 480 model.testNbSubResults(Result, [0])
 481 model.testNbSubShapes(Result, GeomAPI_Shape.SOLID, [1])
 482 model.testNbSubShapes(Result, GeomAPI_Shape.FACE, [63])
 483 model.testNbSubShapes(Result, GeomAPI_Shape.EDGE, [364])
 484 model.testNbSubShapes(Result, GeomAPI_Shape.VERTEX, [728])
 485 model.testResultsVolumes(Result, [22968.704503291784931207075715065])
 486
 487 Param_Drill1Loc.setValue(15)
 488 model.do()
 489 model.testNbResults(Result, 1)
 490 model.testNbSubResults(Result, [0])
 491 model.testNbSubShapes(Result, GeomAPI_Shape.SOLID, [1])
 492 model.testNbSubShapes(Result, GeomAPI_Shape.FACE, [63])
 493 model.testNbSubShapes(Result, GeomAPI_Shape.EDGE, [364])
 494 model.testNbSubShapes(Result, GeomAPI_Shape.VERTEX, [728])
 495 model.testResultsVolumes(Result, [22969.259323538735770853236317635])
 496
 497 Param_Drill1Holder.setValue(16)
 498 model.do()
 499 model.testNbSubResults(Result, [0])
 500 model.testNbSubShapes(Result, GeomAPI_Shape.SOLID, [1])
 501 model.testNbSubShapes(Result, GeomAPI_Shape.FACE, [63])
 502 model.testNbSubShapes(Result, GeomAPI_Shape.EDGE, [364])
 503 model.testNbSubShapes(Result, GeomAPI_Shape.VERTEX, [728])
 504 model.testResultsVolumes(Result, [22969.553506208951148437336087227])
 505
 506 Param_Drill2Loc.setValue(7.5)
 507 model.do()
 508 model.testNbResults(Result, 1)
 509 model.testNbSubResults(Result, [0])
 510 model.testNbSubShapes(Result, GeomAPI_Shape.SOLID, [1])
 511 model.testNbSubShapes(Result, GeomAPI_Shape.FACE, [63])
 512 model.testNbSubShapes(Result, GeomAPI_Shape.EDGE, [364])
 513 model.testNbSubShapes(Result, GeomAPI_Shape.VERTEX, [728])
 514 model.testResultsVolumes(Result, [22969.986144881491782143712043762])
 515
 516 Param_Drill2Radius.setValue(1.9)
 517 model.do()
 518 model.testNbResults(Result, 1)
 519 model.testNbSubResults(Result, [0])
 520 model.testNbSubShapes(Result, GeomAPI_Shape.SOLID, [1])
 521 model.testNbSubShapes(Result, GeomAPI_Shape.FACE, [63])
 522 model.testNbSubShapes(Result, GeomAPI_Shape.EDGE, [364])
 523 model.testNbSubShapes(Result, GeomAPI_Shape.VERTEX, [728])
 524 model.testResultsVolumes(Result, [22956.808010807682876475155353546])
 525
 526 Param_Fillet1.setValue(3)
 527 model.do()
 528 model.testNbResults(Result, 1)
 529 model.testNbSubResults(Result, [0])
 530 model.testNbSubShapes(Result, GeomAPI_Shape.SOLID, [1])
 531 model.testNbSubShapes(Result, GeomAPI_Shape.FACE, [63])
 532 model.testNbSubShapes(Result, GeomAPI_Shape.EDGE, [364])
 533 model.testNbSubShapes(Result, GeomAPI_Shape.VERTEX, [728])
 534 model.testResultsVolumes(Result, [23373.503259112552768783643841743])
 535
 536 model.end()
 537
 538 assert(model.checkPythonDump())