test.models/piece_12.py

   1 # -*- coding: utf-8 -*-
   2
   3 ## Copyright (C) 2014-2017  CEA/DEN, EDF R&D
   4 ##
   5 ## This library is free software; you can redistribute it and/or
   6 ## modify it under the terms of the GNU Lesser General Public
   7 ## License as published by the Free Software Foundation; either
   8 ## version 2.1 of the License, or (at your option) any later version.
   9 ##
  10 ## This library is distributed in the hope that it will be useful,
  11 ## but WITHOUT ANY WARRANTY; without even the implied warranty of
  12 ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  13 ## Lesser General Public License for more details.
  14 ##
  15 ## You should have received a copy of the GNU Lesser General Public
  16 ## License along with this library; if not, write to the Free Software
  17 ## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
  18 ##
  19 ## See http:##www.salome-platform.org/ or
  20 ## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
  21 ##
  22
  23 from GeomAPI import *
  24 from SketchAPI import *
  25
  26 from salome.shaper import model
  27
  28 model.begin()
  29 partSet = model.moduleDocument()
  30 Part_1 = model.addPart(partSet)
  31 Part_1_doc = Part_1.document()
  32 model.addParameter(Part_1_doc, "r1", "26.5")
  33 model.addParameter(Part_1_doc, "r2", "22")
  34 model.addParameter(Part_1_doc, "entraxe", "80")
  35 Parameter_Epaisseur = model.addParameter(Part_1_doc, "epaisseur", "34")
  36 model.addParameter(Part_1_doc, "ep", "4")
  37 model.addParameter(Part_1_doc, "d1", "112")
  38 model.addParameter(Part_1_doc, "d2", "24")
  39 model.addParameter(Part_1_doc, "d3", "5")
  40 model.addParameter(Part_1_doc, "r3", "2.5")
  41 model.addParameter(Part_1_doc, "dtrou", "9")
  42 model.addParameter(Part_1_doc, "ep_o", "24")
  43 model.addParameter(Part_1_doc, "d_per", "2.5")
  44 model.addParameter(Part_1_doc, "r4", "15")
  45 model.addParameter(Part_1_doc, "h", "45")
  46 model.addParameter(Part_1_doc, "ep_o2", "5")
  47 model.addParameter(Part_1_doc, "d_o", "10")
  48 model.addParameter(Part_1_doc, "h_o", "57")
  49 model.addParameter(Part_1_doc, "p_trou1", "29.2")
  50 model.addParameter(Part_1_doc, "p2_trou1", "19.2")
  51 model.addParameter(Part_1_doc, "p_trou2", "46")
  52 model.addParameter(Part_1_doc, "p2_trou", "36.5")
  53 model.addParameter(Part_1_doc, "h_p", "40")
  54 model.addParameter(Part_1_doc, "M8", "4")
  55 model.addParameter(Part_1_doc, "r_trou2", "10")
  56 model.addParameter(Part_1_doc, "r_al1", "12.5")
  57 model.addParameter(Part_1_doc, "r_al2", "14")
  58 model.addParameter(Part_1_doc, "coeff", "1")
  59 Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOZ"))
  60 SketchPoint_1 = Sketch_1.addPoint(model.selection("VERTEX", "PartSet/Origin"))
  61 SketchCircle_1 = Sketch_1.addCircle(0, 0, 15)
  62 SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchPoint_1.result(), SketchCircle_1.center())
  63 SketchCircle_2 = Sketch_1.addCircle(80, 0, 15)
  64 SketchCircle_3 = Sketch_1.addCircle(0, 0, 12.5)
  65 SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchPoint_1.coordinates(), SketchCircle_3.center())
  66 SketchCircle_4 = Sketch_1.addCircle(80, 0, 14)
  67 SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchCircle_2.center(), SketchCircle_4.center())
  68 SketchConstraintRadius_1 = Sketch_1.setRadius(SketchCircle_3.results()[1], "r_al1*coeff")
  69 SketchConstraintRadius_2 = Sketch_1.setRadius(SketchCircle_4.results()[1], "r_al2*coeff")
  70 SketchConstraintRadius_3 = Sketch_1.setRadius(SketchCircle_1.results()[1], "r4*coeff")
  71 SketchConstraintRadius_4 = Sketch_1.setRadius(SketchCircle_2.results()[1], "r4*coeff")
  72 SketchConstraintDistance_1 = Sketch_1.setDistance(SketchCircle_3.center(), SketchCircle_4.center(), "entraxe*coeff")
  73 SketchArc_1 = Sketch_1.addArc(0, 0, 13.96424004376894, -17, 13.96424004376894, 17, True)
  74 SketchArc_1.setName("SketchArc_4")
  75 SketchArc_1.result().setName("SketchArc_4")
  76 SketchArc_1.results()[1].setName("SketchArc_4_2")
  77 SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchCircle_3.center(), SketchArc_1.center())
  78 SketchConstraintCoincidence_4.setName("SketchConstraintCoincidence_7")
  79 SketchLine_1 = Sketch_1.addLine(13.96424004376894, 17, 66.03575995620928, 17)
  80 SketchLine_1.setName("SketchLine_6")
  81 SketchLine_1.result().setName("SketchLine_6")
  82 SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchArc_1.endPoint(), SketchLine_1.startPoint())
  83 SketchConstraintCoincidence_5.setName("SketchConstraintCoincidence_18")
  84 SketchLine_2 = Sketch_1.addLine(13.96424004376894, -17, 66.03575995623092, -17)
  85 SketchLine_2.setName("SketchLine_10")
  86 SketchLine_2.result().setName("SketchLine_10")
  87 SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_2.result())
  88 SketchConstraintHorizontal_1.setName("SketchConstraintHorizontal_5")
  89 SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_1.result())
  90 SketchConstraintHorizontal_2.setName("SketchConstraintHorizontal_6")
  91 SketchLine_3 = Sketch_1.addLine(model.selection("EDGE", "PartSet/OX"))
  92 SketchLine_3.setName("SketchLine_11")
  93 SketchLine_3.result().setName("SketchLine_11")
  94 SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchArc_1.startPoint(), SketchLine_2.startPoint())
  95 SketchConstraintCoincidence_6.setName("SketchConstraintCoincidence_15")
  96 SketchConstraintRadius_5 = Sketch_1.setRadius(SketchArc_1.results()[1], "r2*coeff")
  97 SketchConstraintDistance_2 = Sketch_1.setDistance(SketchArc_1.endPoint(), SketchLine_3.result(), "epaisseur/2*coeff")
  98 SketchConstraintDistance_3 = Sketch_1.setDistance(SketchArc_1.endPoint(), SketchLine_2.result(), "epaisseur*coeff")
  99 SketchArc_2 = Sketch_1.addArc(80, 0, 66.03575995623092, -17, 66.03575995620928, 17, False)
 100 SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchCircle_2.center(), SketchArc_2.center())
 101 SketchConstraintCoincidence_7.setName("SketchConstraintCoincidence_8")
 102 SketchConstraintCoincidence_8 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchArc_2.startPoint())
 103 SketchConstraintCoincidence_8.setName("SketchConstraintCoincidence_9")
 104 SketchConstraintCoincidence_9 = Sketch_1.setCoincident(SketchArc_2.endPoint(), SketchLine_1.endPoint())
 105 SketchConstraintCoincidence_9.setName("SketchConstraintCoincidence_10")
 106 SketchConstraintCoincidence_10 = Sketch_1.setCoincident(SketchCircle_2.center(), SketchLine_3.result())
 107 SketchConstraintCoincidence_10.setName("SketchConstraintCoincidence_11")
 108 SketchConstraintEqual_1 = Sketch_1.setEqual(SketchArc_1.results()[1], SketchArc_2.results()[1])
 109 SketchArc_3 = Sketch_1.addArc(9.077705920073647e-31, -3.860574861749558e-31, 15.46247221747307, -11.0413745939477, 18.89444362769119, -2, False)
 110 SketchArc_3.setName("SketchArc_7")
 111 SketchArc_3.result().setName("SketchArc_7")
 112 SketchArc_3.results()[1].setName("SketchArc_7_2")
 113 SketchConstraintCoincidence_11 = Sketch_1.setCoincident(SketchPoint_1.coordinates(), SketchArc_3.center())
 114 SketchConstraintCoincidence_11.setName("SketchConstraintCoincidence_54")
 115 SketchArc_4 = Sketch_1.addArc(3.497294868556922e-32, 3.186289860391258e-33, 18.89444362769119, 2, 15.46247221747308, 11.04137459394768, False)
 116 SketchArc_4.setName("SketchArc_8")
 117 SketchArc_4.result().setName("SketchArc_8")
 118 SketchArc_4.results()[1].setName("SketchArc_8_2")
 119 SketchConstraintCoincidence_12 = Sketch_1.setCoincident(SketchPoint_1.coordinates(), SketchArc_4.center())
 120 SketchConstraintCoincidence_12.setName("SketchConstraintCoincidence_55")
 121 SketchConstraintEqual_2 = Sketch_1.setEqual(SketchArc_4.results()[1], SketchArc_3.results()[1])
 122 SketchConstraintEqual_2.setName("SketchConstraintEqual_8")
 123 SketchArc_5 = Sketch_1.addArc(17.5, 12.49632352941176, 15.46247221747308, 11.04137459394768, 17.5, 15, True)
 124 SketchArc_5.setName("SketchArc_9")
 125 SketchArc_5.result().setName("SketchArc_9")
 126 SketchArc_5.results()[1].setName("SketchArc_9_2")
 127 SketchConstraintCoincidence_13 = Sketch_1.setCoincident(SketchArc_4.endPoint(), SketchArc_5.startPoint())
 128 SketchConstraintCoincidence_13.setName("SketchConstraintCoincidence_56")
 129 SketchConstraintTangent_1 = Sketch_1.setTangent(SketchArc_4.results()[1], SketchArc_5.results()[1])
 130 SketchArc_6 = Sketch_1.addArc(17.5, -12.49632352941177, 15.46247221747307, -11.0413745939477, 17.5, -15, False)
 131 SketchArc_6.setName("SketchArc_10")
 132 SketchArc_6.result().setName("SketchArc_10")
 133 SketchArc_6.results()[1].setName("SketchArc_10_2")
 134 SketchConstraintCoincidence_14 = Sketch_1.setCoincident(SketchArc_3.startPoint(), SketchArc_6.startPoint())
 135 SketchConstraintCoincidence_14.setName("SketchConstraintCoincidence_57")
 136 SketchConstraintTangent_2 = Sketch_1.setTangent(SketchArc_3.results()[1], SketchArc_6.results()[1])
 137 SketchLine_4 = Sketch_1.addLine(17.5, 15, 37.99999999999999, 15)
 138 SketchLine_4.setName("SketchLine_42")
 139 SketchLine_4.result().setName("SketchLine_42")
 140 SketchConstraintCoincidence_15 = Sketch_1.setCoincident(SketchArc_5.endPoint(), SketchLine_4.startPoint())
 141 SketchConstraintCoincidence_15.setName("SketchConstraintCoincidence_58")
 142 SketchLine_5 = Sketch_1.addLine(18.89444362769119, -2, 34.49444362769118, -2)
 143 SketchLine_5.setName("SketchLine_44")
 144 SketchLine_5.result().setName("SketchLine_44")
 145 SketchConstraintCoincidence_16 = Sketch_1.setCoincident(SketchArc_3.endPoint(), SketchLine_5.startPoint())
 146 SketchConstraintCoincidence_16.setName("SketchConstraintCoincidence_60")
 147 SketchLine_6 = Sketch_1.addLine(18.89444362769119, 2, 34.49444362769118, 2)
 148 SketchLine_6.setName("SketchLine_45")
 149 SketchLine_6.result().setName("SketchLine_45")
 150 SketchConstraintCoincidence_17 = Sketch_1.setCoincident(SketchArc_4.startPoint(), SketchLine_6.startPoint())
 151 SketchConstraintCoincidence_17.setName("SketchConstraintCoincidence_61")
 152 SketchLine_7 = Sketch_1.addLine(37.99999999999999, 15, 38.00000000000001, 5.505556372308819)
 153 SketchLine_7.setName("SketchLine_46")
 154 SketchLine_7.result().setName("SketchLine_46")
 155 SketchConstraintCoincidence_18 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_7.startPoint())
 156 SketchConstraintCoincidence_18.setName("SketchConstraintCoincidence_62")
 157 SketchConstraintEqual_3 = Sketch_1.setEqual(SketchArc_5.results()[1], SketchArc_6.results()[1])
 158 SketchConstraintEqual_3.setName("SketchConstraintEqual_9")
 159 SketchConstraintEqual_4 = Sketch_1.setEqual(SketchLine_5.result(), SketchLine_6.result())
 160 SketchConstraintEqual_4.setName("SketchConstraintEqual_11")
 161 SketchConstraintHorizontal_3 = Sketch_1.setHorizontal(SketchLine_6.result())
 162 SketchConstraintHorizontal_3.setName("SketchConstraintHorizontal_12")
 163 SketchConstraintHorizontal_4 = Sketch_1.setHorizontal(SketchLine_4.result())
 164 SketchConstraintHorizontal_4.setName("SketchConstraintHorizontal_13")
 165 SketchConstraintHorizontal_5 = Sketch_1.setHorizontal(SketchLine_5.result())
 166 SketchConstraintHorizontal_5.setName("SketchConstraintHorizontal_14")
 167 SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_7.result())
 168 SketchConstraintVertical_1.setName("SketchConstraintVertical_7")
 169 SketchLine_8 = Sketch_1.addLine(40, 17, 40, -17.00000000000001)
 170 SketchLine_8.setName("SketchLine_47")
 171 SketchLine_8.result().setName("SketchLine_47")
 172 SketchLine_8.setAuxiliary(True)
 173 SketchConstraintCoincidence_19 = Sketch_1.setCoincident(SketchLine_8.startPoint(), SketchLine_1.result())
 174 SketchConstraintCoincidence_19.setName("SketchConstraintCoincidence_63")
 175 SketchConstraintCoincidence_20 = Sketch_1.setCoincident(SketchLine_8.endPoint(), SketchLine_2.result())
 176 SketchConstraintCoincidence_20.setName("SketchConstraintCoincidence_64")
 177 SketchConstraintMiddle_1 = Sketch_1.setMiddlePoint(SketchLine_8.startPoint(), SketchLine_1.result())
 178 SketchConstraintMiddle_1.setName("SketchConstraintMiddle_4")
 179 SketchConstraintMiddle_2 = Sketch_1.setMiddlePoint(SketchLine_8.endPoint(), SketchLine_2.result())
 180 SketchConstraintMiddle_2.setName("SketchConstraintMiddle_5")
 181 SketchPoint_2 = Sketch_1.addPoint(40, 2.220450266386716e-15)
 182 SketchPoint_2.setName("SketchPoint_7")
 183 SketchPoint_2.result().setName("SketchPoint_7")
 184 SketchConstraintCoincidence_21 = Sketch_1.setCoincident(SketchPoint_2.coordinates(), SketchLine_8.result())
 185 SketchConstraintCoincidence_21.setName("SketchConstraintCoincidence_65")
 186 SketchConstraintMiddle_3 = Sketch_1.setMiddlePoint(SketchLine_8.result(), SketchPoint_2.coordinates())
 187 SketchConstraintMiddle_3.setName("SketchConstraintMiddle_6")
 188 SketchConstraintDistance_4 = Sketch_1.setDistance(SketchLine_6.startPoint(), SketchLine_3.result(), "2*coeff")
 189 SketchConstraintDistance_4.setName("SketchConstraintDistance_17")
 190 SketchConstraintDistance_5 = Sketch_1.setDistance(SketchArc_3.endPoint(), SketchLine_3.result(), "2*coeff")
 191 SketchConstraintDistance_5.setName("SketchConstraintDistance_18")
 192 SketchConstraintRadius_6 = Sketch_1.setRadius(SketchArc_4.results()[1], "(r4+4)*coeff")
 193 SketchConstraintRadius_6.setName("SketchConstraintRadius_13")
 194 SketchConstraintDistance_6 = Sketch_1.setDistance(SketchLine_4.endPoint(), SketchLine_8.result(), "2*coeff")
 195 SketchConstraintDistance_6.setName("SketchConstraintDistance_19")
 196 SketchArc_7 = Sketch_1.addArc(40, 2.220450266386716e-15, 34.49444362769118, 2, 38.00000000000001, 5.505556372308819, True)
 197 SketchArc_7.setName("SketchArc_11")
 198 SketchArc_7.result().setName("SketchArc_11")
 199 SketchArc_7.results()[1].setName("SketchArc_11_2")
 200 SketchConstraintCoincidence_22 = Sketch_1.setCoincident(SketchPoint_2.coordinates(), SketchArc_7.center())
 201 SketchConstraintCoincidence_22.setName("SketchConstraintCoincidence_66")
 202 SketchConstraintCoincidence_23 = Sketch_1.setCoincident(SketchLine_6.endPoint(), SketchArc_7.startPoint())
 203 SketchConstraintCoincidence_23.setName("SketchConstraintCoincidence_67")
 204 SketchArc_8 = Sketch_1.addArc(40.00000000000001, -2.652239435709897e-15, 34.49444362769118, -2, 37.95784774655168, -5.490060577298436, False)
 205 SketchArc_8.setName("SketchArc_12")
 206 SketchArc_8.result().setName("SketchArc_12")
 207 SketchArc_8.results()[1].setName("SketchArc_12_2")
 208 SketchConstraintCoincidence_24 = Sketch_1.setCoincident(SketchPoint_2.coordinates(), SketchArc_8.center())
 209 SketchConstraintCoincidence_24.setName("SketchConstraintCoincidence_68")
 210 SketchConstraintCoincidence_25 = Sketch_1.setCoincident(SketchLine_5.endPoint(), SketchArc_8.startPoint())
 211 SketchConstraintCoincidence_25.setName("SketchConstraintCoincidence_69")
 212 SketchConstraintCoincidence_26 = Sketch_1.setCoincident(SketchArc_7.endPoint(), SketchLine_7.endPoint())
 213 SketchConstraintCoincidence_26.setName("SketchConstraintCoincidence_72")
 214 SketchConstraintDistance_7 = Sketch_1.setDistance(SketchArc_5.endPoint(), SketchLine_1.result(), "2*coeff")
 215 SketchConstraintDistance_7.setName("SketchConstraintDistance_21")
 216 SketchConstraintTangent_3 = Sketch_1.setTangent(SketchArc_5.results()[1], SketchLine_4.result())
 217 SketchCircle_5 = Sketch_1.addCircle(40, -13, 2.5)
 218 SketchCircle_5.setName("SketchCircle_11")
 219 SketchCircle_5.result().setName("SketchCircle_11")
 220 SketchCircle_5.results()[1].setName("SketchCircle_11_2")
 221 SketchConstraintCoincidence_27 = Sketch_1.setCoincident(SketchLine_8.result(), SketchCircle_5.center())
 222 SketchConstraintCoincidence_27.setName("SketchConstraintCoincidence_70")
 223 SketchConstraintRadius_7 = Sketch_1.setRadius(SketchCircle_5.results()[1], "2.5*coeff")
 224 SketchConstraintRadius_7.setName("SketchConstraintRadius_14")
 225 SketchArc_9 = Sketch_1.addArc(40, -13, 35.51437699680511, -13.35942492012782, 37.95784774655168, -8.990060577298436, True)
 226 SketchArc_9.setName("SketchArc_13")
 227 SketchArc_9.result().setName("SketchArc_13")
 228 SketchArc_9.results()[1].setName("SketchArc_13_2")
 229 SketchConstraintCoincidence_28 = Sketch_1.setCoincident(SketchCircle_5.center(), SketchArc_9.center())
 230 SketchConstraintCoincidence_28.setName("SketchConstraintCoincidence_71")
 231 SketchLine_9 = Sketch_1.addLine(37.95784774655168, -5.490060577298436, 37.95784774655168, -8.990060577298436)
 232 SketchLine_9.setName("SketchLine_48")
 233 SketchLine_9.result().setName("SketchLine_48")
 234 SketchConstraintCoincidence_29 = Sketch_1.setCoincident(SketchArc_8.endPoint(), SketchLine_9.startPoint())
 235 SketchConstraintCoincidence_29.setName("SketchConstraintCoincidence_74")
 236 SketchConstraintCoincidence_30 = Sketch_1.setCoincident(SketchArc_9.endPoint(), SketchLine_9.endPoint())
 237 SketchConstraintCoincidence_30.setName("SketchConstraintCoincidence_75")
 238 SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_9.result())
 239 SketchConstraintVertical_2.setName("SketchConstraintVertical_8")
 240 SketchConstraintRadius_8 = Sketch_1.setRadius(SketchArc_9.results()[1], "(2.5+2)*coeff")
 241 SketchConstraintRadius_8.setName("SketchConstraintRadius_15")
 242 SketchConstraintDistance_8 = Sketch_1.setDistance(SketchCircle_5.center(), SketchLine_2.result(), "4*coeff")
 243 SketchConstraintDistance_8.setName("SketchConstraintDistance_22")
 244 SketchLine_10 = Sketch_1.addLine(17.5, -15, 34.00000000000001, -15)
 245 SketchLine_10.setName("SketchLine_43")
 246 SketchLine_10.result().setName("SketchLine_43")
 247 SketchConstraintCoincidence_31 = Sketch_1.setCoincident(SketchArc_6.endPoint(), SketchLine_10.startPoint())
 248 SketchConstraintCoincidence_31.setName("SketchConstraintCoincidence_73")
 249 SketchArc_10 = Sketch_1.addArc(34.00000000000001, -13.48076923076937, 34.00000000000001, -15, 35.51437699680511, -13.35942492012782, False)
 250 SketchArc_10.setName("SketchArc_14")
 251 SketchArc_10.result().setName("SketchArc_14")
 252 SketchArc_10.results()[1].setName("SketchArc_14_2")
 253 SketchConstraintCoincidence_32 = Sketch_1.setCoincident(SketchLine_10.endPoint(), SketchArc_10.startPoint())
 254 SketchConstraintCoincidence_32.setName("SketchConstraintCoincidence_76")
 255 SketchConstraintTangent_4 = Sketch_1.setTangent(SketchLine_10.result(), SketchArc_10.results()[1])
 256 SketchConstraintCoincidence_33 = Sketch_1.setCoincident(SketchArc_9.results()[1], SketchArc_10.endPoint())
 257 SketchConstraintCoincidence_33.setName("SketchConstraintCoincidence_77")
 258 SketchConstraintTangent_5 = Sketch_1.setTangent(SketchArc_9.results()[1], SketchArc_10.results()[1])
 259 SketchConstraintCoincidence_34 = Sketch_1.setCoincident(SketchArc_9.startPoint(), SketchArc_10.endPoint())
 260 SketchConstraintCoincidence_34.setName("SketchConstraintCoincidence_78")
 261 SketchConstraintDistance_9 = Sketch_1.setDistance(SketchLine_10.endPoint(), SketchLine_2.result(), "2*coeff")
 262 SketchConstraintDistance_9.setName("SketchConstraintDistance_20")
 263 SketchConstraintHorizontal_6 = Sketch_1.setHorizontal(SketchLine_10.result())
 264 SketchConstraintHorizontal_6.setName("SketchConstraintHorizontal_15")
 265 SketchConstraintLength_1 = Sketch_1.setLength(SketchLine_10.result(), "16.5*coeff")
 266 SketchConstraintLength_1.setName("SketchConstraintLength_8")
 267 SketchConstraintLength_2 = Sketch_1.setLength(SketchLine_4.result(), "20.5*coeff")
 268 SketchConstraintLength_2.setName("SketchConstraintLength_9")
 269 SketchLine_11 = Sketch_1.addLine(17.5, 15, 17.5, -15)
 270 SketchLine_11.setName("SketchLine_49")
 271 SketchLine_11.result().setName("SketchLine_49")
 272 SketchLine_11.setAuxiliary(True)
 273 SketchConstraintCoincidence_35 = Sketch_1.setCoincident(SketchArc_5.endPoint(), SketchLine_11.startPoint())
 274 SketchConstraintCoincidence_35.setName("SketchConstraintCoincidence_79")
 275 SketchConstraintCoincidence_36 = Sketch_1.setCoincident(SketchArc_6.endPoint(), SketchLine_11.endPoint())
 276 SketchConstraintCoincidence_36.setName("SketchConstraintCoincidence_80")
 277 SketchConstraintVertical_3 = Sketch_1.setVertical(SketchLine_11.result())
 278 SketchConstraintVertical_3.setName("SketchConstraintVertical_9")
 279 SketchConstraintLength_3 = Sketch_1.setLength(SketchLine_5.result(), "15.6*coeff")
 280 SketchConstraintLength_3.setName("SketchConstraintLength_10")
 281 SketchConstraintLength_4 = Sketch_1.setLength(SketchLine_9.result(), "3.5*coeff")
 282 SketchConstraintLength_4.setName("SketchConstraintLength_11")
 283 SketchConstraintMirror_1_objects = [SketchLine_4.result(), SketchArc_5.results()[1], SketchArc_4.results()[1], SketchLine_6.result(), SketchArc_7.results()[1], SketchLine_7.result(), SketchLine_5.result(), SketchArc_8.results()[1], SketchLine_9.result(), SketchArc_9.results()[1], SketchArc_10.results()[1], SketchLine_10.result(), SketchArc_6.results()[1], SketchArc_3.results()[1]]
 284 SketchConstraintMirror_1 = Sketch_1.addMirror(SketchLine_8.result(), SketchConstraintMirror_1_objects)
 285 [SketchLine_12, SketchArc_11, SketchArc_12, SketchLine_13, SketchArc_13, SketchLine_14, SketchLine_15, SketchArc_14, SketchLine_16, SketchArc_15, SketchArc_16, SketchLine_17, SketchArc_17, SketchArc_18] = SketchConstraintMirror_1.mirrored()
 286 SketchArc_18.setName("SketchArc_22")
 287 SketchArc_18.result().setName("SketchArc_22")
 288 SketchArc_18.results()[1].setName("SketchArc_22_2")
 289 SketchArc_17.setName("SketchArc_21")
 290 SketchArc_17.result().setName("SketchArc_21")
 291 SketchArc_17.results()[1].setName("SketchArc_21_2")
 292 SketchLine_17.setName("SketchLine_55")
 293 SketchLine_17.result().setName("SketchLine_55")
 294 SketchArc_16.setName("SketchArc_20")
 295 SketchArc_16.result().setName("SketchArc_20")
 296 SketchArc_16.results()[1].setName("SketchArc_20_2")
 297 SketchArc_15.setName("SketchArc_19")
 298 SketchArc_15.result().setName("SketchArc_19")
 299 SketchArc_15.results()[1].setName("SketchArc_19_2")
 300 SketchLine_16.setName("SketchLine_54")
 301 SketchLine_16.result().setName("SketchLine_54")
 302 SketchArc_14.setName("SketchArc_18")
 303 SketchArc_14.result().setName("SketchArc_18")
 304 SketchArc_14.results()[1].setName("SketchArc_18_2")
 305 SketchLine_15.setName("SketchLine_53")
 306 SketchLine_15.result().setName("SketchLine_53")
 307 SketchLine_14.setName("SketchLine_52")
 308 SketchLine_14.result().setName("SketchLine_52")
 309 SketchArc_13.setName("SketchArc_17")
 310 SketchArc_13.result().setName("SketchArc_17")
 311 SketchArc_13.results()[1].setName("SketchArc_17_2")
 312 SketchLine_13.setName("SketchLine_51")
 313 SketchLine_13.result().setName("SketchLine_51")
 314 SketchArc_12.setName("SketchArc_16")
 315 SketchArc_12.result().setName("SketchArc_16")
 316 SketchArc_12.results()[1].setName("SketchArc_16_2")
 317 SketchArc_11.setName("SketchArc_15")
 318 SketchArc_11.result().setName("SketchArc_15")
 319 SketchArc_11.results()[1].setName("SketchArc_15_2")
 320 SketchLine_12.setName("SketchLine_50")
 321 SketchLine_12.result().setName("SketchLine_50")
 322 model.do()
 323 Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Sketch_1/Wire-SketchArc_4_2f-SketchLine_6r-SketchLine_10f-SketchArc_2_2f")], model.selection(), "h_p*coeff", 0)
 324 Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/To_Face_1"))
 325 SketchProjection_1 = Sketch_2.addProjection(model.selection("EDGE", "Sketch_1/Edge-SketchCircle_2_2"))
 326 SketchCircle_6 = SketchProjection_1.createdFeature()
 327 SketchCircle_6.setName("SketchCircle_5")
 328 SketchCircle_6.result().setName("SketchCircle_5")
 329 SketchCircle_6.results()[1].setName("SketchCircle_5_2")
 330 SketchProjection_2 = Sketch_2.addProjection(model.selection("EDGE", "Sketch_1/Edge-SketchCircle_4_2"))
 331 SketchCircle_7 = SketchProjection_2.createdFeature()
 332 SketchCircle_7.setName("SketchCircle_6")
 333 SketchCircle_7.result().setName("SketchCircle_6")
 334 SketchCircle_7.results()[1].setName("SketchCircle_6_2")
 335 SketchCircle_8 = Sketch_2.addCircle(80, 0, 22)
 336 SketchCircle_8.setName("SketchCircle_7")
 337 SketchCircle_8.result().setName("SketchCircle_7")
 338 SketchCircle_8.results()[1].setName("SketchCircle_7_2")
 339 SketchConstraintCoincidence_37 = Sketch_2.setCoincident(SketchCircle_6.result(), SketchCircle_8.center())
 340 SketchConstraintCoincidence_37.setName("SketchConstraintCoincidence_12")
 341 SketchConstraintRadius_9 = Sketch_2.setRadius(SketchCircle_8.results()[1], "r2*coeff")
 342 SketchConstraintRadius_9.setName("SketchConstraintRadius_6")
 343 model.do()
 344 Extrusion_2 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", "Sketch_2")], model.selection(), "10*coeff", 0)
 345 ExtrusionCut_1 = model.addExtrusionCut(Part_1_doc, [model.selection("WIRE", "Sketch_1/Wire-SketchCircle_3_2f")], model.selection(), "p_trou1*coeff", 0, [model.selection("SOLID", "Extrusion_1_1")])
 346 ExtrusionCut_2 = model.addExtrusionCut(Part_1_doc, [model.selection("WIRE", "Sketch_1/Wire-SketchCircle_1_2r")], model.selection(), "p2_trou1*coeff", 0, [model.selection("SOLID", "ExtrusionCut_1_1")])
 347 ExtrusionCut_3 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchCircle_4_2f")], model.selection(), "p_trou2*coeff", 0, [model.selection("SOLID", "Extrusion_2_1"), model.selection("SOLID", "ExtrusionCut_2_1")])
 348 ExtrusionCut_4 = model.addExtrusionCut(Part_1_doc, [model.selection("WIRE", "Sketch_1/Wire-SketchCircle_2_2r")], model.selection(), "p2_trou*coeff", 0, [model.selection("SOLID", "ExtrusionCut_3_2")])
 349 Plane_4 = model.addPlane(Part_1_doc, model.selection("FACE", "PartSet/XOY"), "22.5*coeff", False)
 350 Plane_5 = model.addPlane(Part_1_doc, model.selection("FACE", "Plane_1"), "45*coeff", True)
 351 Sketch_3 = model.addSketch(Part_1_doc, model.selection("FACE", "Plane_2"))
 352 SketchProjection_3 = Sketch_3.addProjection(model.selection("EDGE", "Extrusion_1_1/Generated_Face_4&Extrusion_1_1/Generated_Face_1"))
 353 SketchLine_18 = SketchProjection_3.createdFeature()
 354 SketchLine_18.setName("SketchLine_4")
 355 SketchLine_18.result().setName("SketchLine_4")
 356 SketchProjection_4 = Sketch_3.addProjection(model.selection("EDGE", "Sketch_1/Edge-SketchLine_6"))
 357 SketchLine_19 = SketchProjection_4.createdFeature()
 358 SketchLine_19.setName("SketchLine_5")
 359 SketchLine_19.result().setName("SketchLine_5")
 360 SketchProjection_5 = Sketch_3.addProjection(model.selection("EDGE", "PartSet/OY"))
 361 SketchLine_20 = SketchProjection_5.createdFeature()
 362 SketchLine_20.setName("SketchLine_7")
 363 SketchLine_20.result().setName("SketchLine_7")
 364 SketchProjection_6 = Sketch_3.addProjection(model.selection("EDGE", "PartSet/OX"))
 365 SketchLine_21 = SketchProjection_6.createdFeature()
 366 SketchLine_21.setName("SketchLine_8")
 367 SketchLine_21.result().setName("SketchLine_8")
 368 SketchLine_22 = Sketch_3.addLine(72.5, 0, 87.5, 0)
 369 SketchLine_22.setName("SketchLine_9")
 370 SketchLine_22.result().setName("SketchLine_9")
 371 SketchConstraintCoincidence_38 = Sketch_3.setCoincident(SketchLine_22.startPoint(), SketchLine_21.result())
 372 SketchConstraintCoincidence_38.setName("SketchConstraintCoincidence_13")
 373 SketchLine_23 = Sketch_3.addLine(87.5, 0, 87.5, -12)
 374 SketchLine_23.setName("SketchLine_12")
 375 SketchLine_23.result().setName("SketchLine_12")
 376 SketchConstraintCoincidence_39 = Sketch_3.setCoincident(SketchLine_22.endPoint(), SketchLine_23.startPoint())
 377 SketchConstraintCoincidence_39.setName("SketchConstraintCoincidence_14")
 378 SketchLine_24 = Sketch_3.addLine(72.5, -12, 72.5, 0)
 379 SketchLine_24.setName("SketchLine_14")
 380 SketchLine_24.result().setName("SketchLine_14")
 381 SketchConstraintCoincidence_40 = Sketch_3.setCoincident(SketchLine_22.startPoint(), SketchLine_24.endPoint())
 382 SketchConstraintCoincidence_40.setName("SketchConstraintCoincidence_19")
 383 SketchConstraintHorizontal_7 = Sketch_3.setHorizontal(SketchLine_22.result())
 384 SketchConstraintHorizontal_7.setName("SketchConstraintHorizontal_4")
 385 SketchConstraintVertical_4 = Sketch_3.setVertical(SketchLine_24.result())
 386 SketchConstraintVertical_4.setName("SketchConstraintVertical_1")
 387 SketchConstraintVertical_5 = Sketch_3.setVertical(SketchLine_23.result())
 388 SketchConstraintVertical_5.setName("SketchConstraintVertical_2")
 389 SketchConstraintEqual_5 = Sketch_3.setEqual(SketchLine_24.result(), SketchLine_23.result())
 390 SketchConstraintEqual_5.setName("SketchConstraintEqual_3")
 391 SketchConstraintLength_5 = Sketch_3.setLength(SketchLine_22.result(), "15*coeff")
 392 SketchConstraintLength_5.setName("SketchConstraintLength_1")
 393 SketchConstraintLength_6 = Sketch_3.setLength(SketchLine_24.result(), "12*coeff")
 394 SketchConstraintLength_6.setName("SketchConstraintLength_2")
 395 SketchCircle_9 = Sketch_3.addCircle(80, -9, 4)
 396 SketchCircle_9.setName("SketchCircle_8")
 397 SketchCircle_9.result().setName("SketchCircle_8")
 398 SketchCircle_9.results()[1].setName("SketchCircle_8_2")
 399 SketchConstraintDistance_10 = Sketch_3.setDistance(SketchCircle_9.center(), SketchLine_22.result(), "dtrou*coeff")
 400 SketchConstraintDistance_10.setName("SketchConstraintDistance_5")
 401 SketchConstraintRadius_10 = Sketch_3.setRadius(SketchCircle_9.results()[1], "M8*coeff")
 402 SketchConstraintRadius_10.setName("SketchConstraintRadius_7")
 403 SketchConstraintDistance_11 = Sketch_3.setDistance(SketchLine_20.result(), SketchLine_24.endPoint(), "(entraxe-15/2)*coeff")
 404 SketchConstraintDistance_11.setName("SketchConstraintDistance_7")
 405 SketchConstraintDistance_12 = Sketch_3.setDistance(SketchCircle_9.center(), SketchLine_24.result(), "15/2*coeff")
 406 SketchConstraintDistance_12.setName("SketchConstraintDistance_8")
 407 SketchLine_25 = Sketch_3.addLine(85, -17, 75, -17)
 408 SketchLine_25.setName("SketchLine_26")
 409 SketchLine_25.result().setName("SketchLine_26")
 410 SketchLine_26 = Sketch_3.addLine(75, -17, 72.5, -12)
 411 SketchLine_26.setName("SketchLine_27")
 412 SketchLine_26.result().setName("SketchLine_27")
 413 SketchConstraintCoincidence_41 = Sketch_3.setCoincident(SketchLine_25.endPoint(), SketchLine_26.startPoint())
 414 SketchConstraintCoincidence_41.setName("SketchConstraintCoincidence_31")
 415 SketchConstraintCoincidence_42 = Sketch_3.setCoincident(SketchLine_24.startPoint(), SketchLine_26.endPoint())
 416 SketchConstraintCoincidence_42.setName("SketchConstraintCoincidence_32")
 417 SketchLine_27 = Sketch_3.addLine(87.5, -12, 85, -17)
 418 SketchLine_27.setName("SketchLine_28")
 419 SketchLine_27.result().setName("SketchLine_28")
 420 SketchConstraintCoincidence_43 = Sketch_3.setCoincident(SketchLine_23.endPoint(), SketchLine_27.startPoint())
 421 SketchConstraintCoincidence_43.setName("SketchConstraintCoincidence_33")
 422 SketchConstraintCoincidence_44 = Sketch_3.setCoincident(SketchLine_25.startPoint(), SketchLine_27.endPoint())
 423 SketchConstraintCoincidence_44.setName("SketchConstraintCoincidence_34")
 424 SketchConstraintHorizontal_8 = Sketch_3.setHorizontal(SketchLine_25.result())
 425 SketchConstraintHorizontal_8.setName("SketchConstraintHorizontal_7")
 426 SketchConstraintEqual_6 = Sketch_3.setEqual(SketchLine_27.result(), SketchLine_26.result())
 427 SketchConstraintEqual_6.setName("SketchConstraintEqual_7")
 428 SketchConstraintDistance_13 = Sketch_3.setDistance(SketchLine_22.endPoint(), SketchLine_25.result(), "17*coeff")
 429 SketchConstraintDistance_13.setName("SketchConstraintDistance_11")
 430 SketchConstraintDistance_14 = Sketch_3.setDistance(SketchLine_23.result(), SketchLine_25.startPoint(), "2.5*coeff")
 431 SketchConstraintDistance_14.setName("SketchConstraintDistance_12")
 432 model.do()
 433 Extrusion_3 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Sketch_3/Wire-SketchLine_9r-SketchLine_12r-SketchLine_14r-SketchLine_26r-SketchLine_27r-SketchLine_28r")], model.selection(), model.selection("FACE", "Extrusion_1_1/Generated_Face_3"), 0, model.selection(), 0)
 434 Boolean_1 = model.addSmash(Part_1_doc, [model.selection("SOLID", "Extrusion_3_1")], [model.selection("SOLID", "ExtrusionCut_4_1")])
 435 ExtrusionCut_5 = model.addExtrusionCut(Part_1_doc, [model.selection("WIRE", "Sketch_3/Wire-SketchCircle_8_2f")], model.selection(), 10, 0, [model.selection("SOLID", "Boolean_1_1_1")])
 436 ExtrusionCut_6 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_3/Face-SketchCircle_8_2f")], model.selection(), 10, 0, [model.selection("SOLID", "ExtrusionCut_5_1_1")])
 437 Axis_4 = model.addAxis(Part_1_doc, model.selection("FACE", "ExtrusionCut_6_1_2/Modfied_1"))
 438 Sketch_4 = model.addSketch(Part_1_doc, model.selection("FACE", "Plane_1"))
 439 SketchProjection_7 = Sketch_4.addProjection(model.selection("EDGE", "PartSet/OY"))
 440 SketchLine_28 = SketchProjection_7.createdFeature()
 441 SketchLine_28.setName("SketchLine_17")
 442 SketchLine_28.result().setName("SketchLine_17")
 443 SketchProjection_8 = Sketch_4.addProjection(model.selection("EDGE", "PartSet/OX"))
 444 SketchLine_29 = SketchProjection_8.createdFeature()
 445 SketchLine_29.setName("SketchLine_18")
 446 SketchLine_29.result().setName("SketchLine_18")
 447 SketchLine_30 = Sketch_4.addLine(7.5, 0, -7.5, 0)
 448 SketchLine_30.setName("SketchLine_19")
 449 SketchLine_30.result().setName("SketchLine_19")
 450 SketchConstraintCoincidence_45 = Sketch_4.setCoincident(SketchLine_30.startPoint(), SketchLine_29.result())
 451 SketchConstraintCoincidence_45.setName("SketchConstraintCoincidence_22")
 452 SketchLine_31 = Sketch_4.addLine(-7.5, 0, -7.5, -12)
 453 SketchLine_31.setName("SketchLine_20")
 454 SketchLine_31.result().setName("SketchLine_20")
 455 SketchConstraintCoincidence_46 = Sketch_4.setCoincident(SketchLine_30.endPoint(), SketchLine_31.startPoint())
 456 SketchConstraintCoincidence_46.setName("SketchConstraintCoincidence_23")
 457 SketchLine_32 = Sketch_4.addLine(7.5, -12, 7.5, 0)
 458 SketchLine_32.setName("SketchLine_24")
 459 SketchLine_32.result().setName("SketchLine_24")
 460 SketchConstraintCoincidence_47 = Sketch_4.setCoincident(SketchLine_30.startPoint(), SketchLine_32.endPoint())
 461 SketchConstraintCoincidence_47.setName("SketchConstraintCoincidence_28")
 462 SketchConstraintVertical_6 = Sketch_4.setVertical(SketchLine_31.result())
 463 SketchConstraintVertical_6.setName("SketchConstraintVertical_3")
 464 SketchConstraintVertical_7 = Sketch_4.setVertical(SketchLine_32.result())
 465 SketchConstraintVertical_7.setName("SketchConstraintVertical_4")
 466 SketchConstraintHorizontal_9 = Sketch_4.setHorizontal(SketchLine_30.result())
 467 SketchConstraintEqual_7 = Sketch_4.setEqual(SketchLine_31.result(), SketchLine_32.result())
 468 SketchConstraintEqual_7.setName("SketchConstraintEqual_5")
 469 SketchConstraintMiddle_4 = Sketch_4.setMiddlePoint(SketchLine_30.result(), SketchAPI_Line(SketchLine_29).startPoint())
 470 SketchConstraintMiddle_4.setName("SketchConstraintMiddle_1")
 471 SketchLine_33 = Sketch_4.addLine(-7.5, -12, -5, -17)
 472 SketchLine_33.setName("SketchLine_21")
 473 SketchLine_33.result().setName("SketchLine_21")
 474 SketchConstraintCoincidence_48 = Sketch_4.setCoincident(SketchLine_31.endPoint(), SketchLine_33.startPoint())
 475 SketchConstraintCoincidence_48.setName("SketchConstraintCoincidence_24")
 476 SketchLine_34 = Sketch_4.addLine(-5, -17, 5, -17)
 477 SketchLine_34.setName("SketchLine_22")
 478 SketchLine_34.result().setName("SketchLine_22")
 479 SketchConstraintCoincidence_49 = Sketch_4.setCoincident(SketchLine_33.endPoint(), SketchLine_34.startPoint())
 480 SketchConstraintCoincidence_49.setName("SketchConstraintCoincidence_25")
 481 SketchLine_35 = Sketch_4.addLine(5, -17, 7.5, -12)
 482 SketchLine_35.setName("SketchLine_23")
 483 SketchLine_35.result().setName("SketchLine_23")
 484 SketchConstraintCoincidence_50 = Sketch_4.setCoincident(SketchLine_34.endPoint(), SketchLine_35.startPoint())
 485 SketchConstraintCoincidence_50.setName("SketchConstraintCoincidence_26")
 486 SketchConstraintCoincidence_51 = Sketch_4.setCoincident(SketchLine_32.startPoint(), SketchLine_35.endPoint())
 487 SketchConstraintCoincidence_51.setName("SketchConstraintCoincidence_27")
 488 SketchConstraintEqual_8 = Sketch_4.setEqual(SketchLine_35.result(), SketchLine_33.result())
 489 SketchConstraintEqual_8.setName("SketchConstraintEqual_6")
 490 SketchConstraintHorizontal_10 = Sketch_4.setHorizontal(SketchLine_34.result())
 491 SketchConstraintHorizontal_10.setName("SketchConstraintHorizontal_8")
 492 SketchConstraintLength_7 = Sketch_4.setLength(SketchLine_30.result(), "15*coeff")
 493 SketchConstraintLength_7.setName("SketchConstraintLength_4")
 494 SketchConstraintLength_8 = Sketch_4.setLength(SketchLine_31.result(), "12*coeff")
 495 SketchConstraintLength_8.setName("SketchConstraintLength_5")
 496 SketchConstraintDistance_15 = Sketch_4.setDistance(SketchLine_30.result(), SketchLine_34.endPoint(), "17*coeff")
 497 SketchConstraintDistance_15.setName("SketchConstraintDistance_9")
 498 SketchConstraintLength_9 = Sketch_4.setLength(SketchLine_34.result(), "10*coeff")
 499 SketchConstraintLength_9.setName("SketchConstraintLength_6")
 500 SketchCircle_10 = Sketch_4.addCircle(0, -9, 4)
 501 SketchCircle_10.setName("SketchCircle_9")
 502 SketchCircle_10.result().setName("SketchCircle_9")
 503 SketchCircle_10.results()[1].setName("SketchCircle_9_2")
 504 SketchConstraintRadius_11 = Sketch_4.setRadius(SketchCircle_10.results()[1], "M8*coeff")
 505 SketchConstraintRadius_11.setName("SketchConstraintRadius_8")
 506 SketchLine_36 = Sketch_4.addLine(0, 0, 0, -12.97564207914519)
 507 SketchLine_36.setName("SketchLine_25")
 508 SketchLine_36.result().setName("SketchLine_25")
 509 SketchLine_36.setAuxiliary(True)
 510 SketchConstraintCoincidence_52 = Sketch_4.setCoincident(SketchAPI_Line(SketchLine_28).startPoint(), SketchLine_36.startPoint())
 511 SketchConstraintCoincidence_52.setName("SketchConstraintCoincidence_29")
 512 SketchConstraintVertical_8 = Sketch_4.setVertical(SketchLine_36.result())
 513 SketchConstraintVertical_8.setName("SketchConstraintVertical_5")
 514 SketchConstraintCoincidence_53 = Sketch_4.setCoincident(SketchCircle_10.center(), SketchLine_36.result())
 515 SketchConstraintCoincidence_53.setName("SketchConstraintCoincidence_30")
 516 SketchConstraintDistance_16 = Sketch_4.setDistance(SketchCircle_10.center(), SketchLine_30.result(), "dtrou*coeff")
 517 SketchConstraintDistance_16.setName("SketchConstraintDistance_10")
 518 SketchConstraintLength_10 = Sketch_4.setLength(SketchLine_36.result(), 12.975642079145)
 519 SketchConstraintLength_10.setName("SketchConstraintLength_7")
 520 model.do()
 521 Extrusion_4 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Sketch_4/Wire-SketchLine_19f-SketchLine_20f-SketchLine_24f-SketchLine_21f-SketchLine_22f-SketchLine_23f")], model.selection(), model.selection("FACE", "Extrusion_1_1/Generated_Face_1"), 0, model.selection(), 0)
 522 Boolean_2 = model.addSmash(Part_1_doc, [model.selection("SOLID", "ExtrusionCut_6_1_1"), model.selection("SOLID", "Extrusion_4_1")], [model.selection("SOLID", "ExtrusionCut_6_1_2")])
 523 ExtrusionCut_7 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_4/Face-SketchCircle_9_2f")], model.selection(), 0, 10, [model.selection("SOLID", "Boolean_2_1_1")])
 524 ExtrusionCut_8 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_4/Face-SketchCircle_9_2f")], model.selection(), 0, 10, [model.selection("SOLID", "ExtrusionCut_7_1_1")])
 525 Sketch_5 = model.addSketch(Part_1_doc, model.selection("FACE", "Boolean_2_1_1/Modified_Face_1"))
 526 SketchPoint_3 = Sketch_5.addPoint(model.selection("VERTEX", "PartSet/Origin"))
 527 SketchPoint_3.setName("SketchPoint_2")
 528 SketchPoint_3.result().setName("SketchPoint_2")
 529 SketchLine_37 = Sketch_5.addLine(-13.96424004376894, -17, -32, -17)
 530 SketchLine_37.setName("SketchLine_29")
 531 SketchLine_37.result().setName("SketchLine_29")
 532 SketchLine_38 = Sketch_5.addLine(-32, 17, -13.96424004376904, 17)
 533 SketchLine_38.setName("SketchLine_30")
 534 SketchLine_38.result().setName("SketchLine_30")
 535 SketchConstraintHorizontal_11 = Sketch_5.setHorizontal(SketchLine_37.result())
 536 SketchConstraintHorizontal_11.setName("SketchConstraintHorizontal_10")
 537 SketchConstraintHorizontal_12 = Sketch_5.setHorizontal(SketchLine_38.result())
 538 SketchConstraintHorizontal_12.setName("SketchConstraintHorizontal_11")
 539 SketchLine_39 = Sketch_5.addLine(model.selection("EDGE", "PartSet/OX"))
 540 SketchLine_39.setName("SketchLine_31")
 541 SketchLine_39.result().setName("SketchLine_31")
 542 SketchConstraintDistance_17 = Sketch_5.setDistance(SketchLine_37.result(), SketchLine_38.startPoint(), "epaisseur*coeff")
 543 SketchConstraintDistance_17.setName("SketchConstraintDistance_13")
 544 SketchArc_19 = Sketch_5.addArc(2.175718373563154e-31, -6.039735315912772e-31, -13.96424004376904, 17, -13.964240043769, -17, False)
 545 SketchArc_19.setName("SketchArc_5")
 546 SketchArc_19.result().setName("SketchArc_5")
 547 SketchArc_19.results()[1].setName("SketchArc_5_2")
 548 SketchConstraintCoincidence_54 = Sketch_5.setCoincident(SketchPoint_3.coordinates(), SketchArc_19.center())
 549 SketchConstraintCoincidence_54.setName("SketchConstraintCoincidence_36")
 550 SketchConstraintCoincidence_55 = Sketch_5.setCoincident(SketchLine_38.endPoint(), SketchArc_19.startPoint())
 551 SketchConstraintCoincidence_55.setName("SketchConstraintCoincidence_37")
 552 SketchConstraintCoincidence_56 = Sketch_5.setCoincident(SketchLine_37.result(), SketchArc_19.endPoint())
 553 SketchConstraintCoincidence_56.setName("SketchConstraintCoincidence_39")
 554 SketchConstraintRadius_12 = Sketch_5.setRadius(SketchArc_19.results()[1], "r2*coeff")
 555 SketchConstraintRadius_12.setName("SketchConstraintRadius_11")
 556 SketchLine_40 = Sketch_5.addLine(-32, -17, -32, 17)
 557 SketchLine_40.setName("SketchLine_32")
 558 SketchLine_40.result().setName("SketchLine_32")
 559 SketchConstraintCoincidence_57 = Sketch_5.setCoincident(SketchLine_38.startPoint(), SketchLine_40.endPoint())
 560 SketchConstraintCoincidence_57.setName("SketchConstraintCoincidence_35")
 561 SketchConstraintCoincidence_58 = Sketch_5.setCoincident(SketchLine_40.startPoint(), SketchLine_37.endPoint())
 562 SketchConstraintCoincidence_58.setName("SketchConstraintCoincidence_38")
 563 SketchConstraintDistance_18 = Sketch_5.setDistance(SketchLine_40.result(), SketchArc_19.center(), "d1*coeff-entraxe*coeff")
 564 SketchConstraintDistance_18.setName("SketchConstraintDistance_14")
 565 SketchConstraintVertical_9 = Sketch_5.setVertical(SketchLine_40.result())
 566 SketchConstraintVertical_9.setName("SketchConstraintVertical_6")
 567 SketchConstraintDistance_19 = Sketch_5.setDistance(SketchLine_37.result(), SketchArc_19.center(), "epaisseur/2*coeff")
 568 SketchConstraintDistance_19.setName("SketchConstraintDistance_15")
 569 SketchConstraintCoincidence_59 = Sketch_5.setCoincident(SketchArc_19.endPoint(), SketchLine_37.startPoint())
 570 SketchConstraintCoincidence_59.setName("SketchConstraintCoincidence_40")
 571 model.do()
 572 Extrusion_5 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_5/Face-SketchLine_29r-SketchLine_30r-SketchArc_5_2r-SketchLine_32r")], model.selection(), 0, "22*coeff")
 573 Sketch_6_origin = GeomAPI_Pnt(0, 0, 0)
 574 Sketch_6_norm = GeomAPI_Dir(0, 1, 0)
 575 Sketch_6_dirx = GeomAPI_Dir(1, 0, 0)
 576 Sketch_6 = model.addSketch(Part_1_doc, GeomAPI_Ax3(Sketch_6_origin, Sketch_6_dirx, Sketch_6_norm))
 577 SketchLine_41 = Sketch_6.addLine(-32, -17, -32, 17)
 578 SketchLine_41.setName("SketchLine_33")
 579 SketchLine_41.result().setName("SketchLine_33")
 580 SketchPoint_4 = Sketch_6.addPoint(model.selection("VERTEX", "Sketch_5/Vertex-SketchLine_32s-SketchLine_29e"))
 581 SketchPoint_4.setName("SketchPoint_3")
 582 SketchPoint_4.result().setName("SketchPoint_3")
 583 SketchConstraintCoincidence_60 = Sketch_6.setCoincident(SketchLine_41.startPoint(), SketchPoint_4.result())
 584 SketchConstraintCoincidence_60.setName("SketchConstraintCoincidence_41")
 585 SketchPoint_5 = Sketch_6.addPoint(model.selection("VERTEX", "Sketch_5/Vertex-SketchLine_30s-SketchLine_32e"))
 586 SketchPoint_5.setName("SketchPoint_4")
 587 SketchPoint_5.result().setName("SketchPoint_4")
 588 SketchConstraintCoincidence_61 = Sketch_6.setCoincident(SketchLine_41.endPoint(), SketchPoint_5.result())
 589 SketchConstraintCoincidence_61.setName("SketchConstraintCoincidence_42")
 590 SketchPoint_6 = Sketch_6.addPoint(model.selection("VERTEX", "Sketch_5/Vertex-SketchPoint_2-SketchArc_5-SketchLine_31s"))
 591 SketchPoint_6.setName("SketchPoint_5")
 592 SketchPoint_6.result().setName("SketchPoint_5")
 593 SketchLine_42 = Sketch_6.addLine(model.selection("EDGE", "Sketch_5/Edge-SketchLine_30"))
 594 SketchLine_42.setName("SketchLine_34")
 595 SketchLine_42.result().setName("SketchLine_34")
 596 SketchLine_43 = Sketch_6.addLine(model.selection("EDGE", "Sketch_5/Edge-SketchLine_29"))
 597 SketchLine_43.setName("SketchLine_35")
 598 SketchLine_43.result().setName("SketchLine_35")
 599 SketchArc_20 = Sketch_6.addArc(0, 0, -20.32855135026245, 17, -20.32855135026245, -17, False)
 600 SketchArc_20.setName("SketchArc_6")
 601 SketchArc_20.result().setName("SketchArc_6")
 602 SketchArc_20.results()[1].setName("SketchArc_6_2")
 603 SketchConstraintCoincidence_62 = Sketch_6.setCoincident(SketchPoint_6.result(), SketchArc_20.center())
 604 SketchConstraintCoincidence_62.setName("SketchConstraintCoincidence_43")
 605 SketchConstraintCoincidence_63 = Sketch_6.setCoincident(SketchLine_42.result(), SketchArc_20.startPoint())
 606 SketchConstraintCoincidence_63.setName("SketchConstraintCoincidence_44")
 607 SketchConstraintCoincidence_64 = Sketch_6.setCoincident(SketchLine_43.result(), SketchArc_20.endPoint())
 608 SketchConstraintCoincidence_64.setName("SketchConstraintCoincidence_45")
 609 SketchLine_44 = Sketch_6.addLine(-20.32855135026245, -17, -32, -17)
 610 SketchLine_44.setName("SketchLine_36")
 611 SketchLine_44.result().setName("SketchLine_36")
 612 SketchConstraintCoincidence_65 = Sketch_6.setCoincident(SketchArc_20.endPoint(), SketchLine_44.startPoint())
 613 SketchConstraintCoincidence_65.setName("SketchConstraintCoincidence_46")
 614 SketchConstraintCoincidence_66 = Sketch_6.setCoincident(SketchLine_41.startPoint(), SketchLine_44.endPoint())
 615 SketchConstraintCoincidence_66.setName("SketchConstraintCoincidence_47")
 616 SketchLine_45 = Sketch_6.addLine(-20.32855135026245, 17, -32, 17)
 617 SketchLine_45.setName("SketchLine_37")
 618 SketchLine_45.result().setName("SketchLine_37")
 619 SketchConstraintCoincidence_67 = Sketch_6.setCoincident(SketchArc_20.startPoint(), SketchLine_45.startPoint())
 620 SketchConstraintCoincidence_67.setName("SketchConstraintCoincidence_48")
 621 SketchConstraintCoincidence_68 = Sketch_6.setCoincident(SketchLine_41.endPoint(), SketchLine_45.endPoint())
 622 SketchConstraintCoincidence_68.setName("SketchConstraintCoincidence_49")
 623 SketchConstraintRadius_13 = Sketch_6.setRadius(SketchArc_20.results()[1], "r1*coeff")
 624 SketchConstraintRadius_13.setName("SketchConstraintRadius_10")
 625 model.do()
 626 Extrusion_6 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_6/Face-SketchLine_33r-SketchArc_6_2r-SketchLine_36r-SketchLine_37f")], model.selection(), "77*coeff-h_p*coeff", 0)
 627 Sketch_7 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_6_1/Generated_Face_1"))
 628 SketchLine_46 = Sketch_7.addLine(37, -8.881784197001252e-16, -22, 1.665334536937735e-15)
 629 SketchLine_46.setName("SketchLine_38")
 630 SketchLine_46.result().setName("SketchLine_38")
 631 SketchLine_46.setAuxiliary(True)
 632 SketchLine_47 = Sketch_7.addLine(model.selection("EDGE", "Extrusion_6_1/Generated_Face_1&Extrusion_6_1/To_Face_1"))
 633 SketchLine_47.setName("SketchLine_39")
 634 SketchLine_47.result().setName("SketchLine_39")
 635 SketchConstraintCoincidence_69 = Sketch_7.setCoincident(SketchLine_46.startPoint(), SketchLine_47.result())
 636 SketchConstraintCoincidence_69.setName("SketchConstraintCoincidence_50")
 637 SketchLine_48 = Sketch_7.addLine(model.selection("EDGE", "Extrusion_5_1/Generated_Face_2&Extrusion_5_1/From_Face_1"))
 638 SketchLine_48.setName("SketchLine_40")
 639 SketchLine_48.result().setName("SketchLine_40")
 640 SketchConstraintCoincidence_70 = Sketch_7.setCoincident(SketchLine_46.endPoint(), SketchLine_48.result())
 641 SketchConstraintCoincidence_70.setName("SketchConstraintCoincidence_51")
 642 SketchConstraintMiddle_5 = Sketch_7.setMiddlePoint(SketchLine_46.startPoint(), SketchLine_47.result())
 643 SketchConstraintMiddle_5.setName("SketchConstraintMiddle_2")
 644 SketchConstraintMiddle_6 = Sketch_7.setMiddlePoint(SketchLine_48.result(), SketchLine_46.endPoint())
 645 SketchConstraintMiddle_6.setName("SketchConstraintMiddle_3")
 646 SketchPoint_7 = Sketch_7.addPoint(17, -1.95597787542754e-16)
 647 SketchPoint_7.setName("SketchPoint_6")
 648 SketchPoint_7.result().setName("SketchPoint_6")
 649 SketchConstraintCoincidence_71 = Sketch_7.setCoincident(SketchPoint_7.coordinates(), SketchLine_46.result())
 650 SketchConstraintCoincidence_71.setName("SketchConstraintCoincidence_52")
 651 SketchProjection_9 = Sketch_7.addProjection(model.selection("EDGE", "PartSet/OZ"))
 652 SketchLine_49 = SketchProjection_9.createdFeature()
 653 SketchLine_49.setName("SketchLine_41")
 654 SketchLine_49.result().setName("SketchLine_41")
 655 SketchConstraintDistance_20 = Sketch_7.setDistance(SketchLine_49.result(), SketchPoint_7.coordinates(), "(h_o-h_p)*coeff")
 656 SketchConstraintDistance_20.setName("SketchConstraintDistance_16")
 657 SketchCircle_11 = Sketch_7.addCircle(17, -1.95597787542754e-16, 2.5)
 658 SketchCircle_11.setName("SketchCircle_10")
 659 SketchCircle_11.result().setName("SketchCircle_10")
 660 SketchCircle_11.results()[1].setName("SketchCircle_10_2")
 661 SketchConstraintCoincidence_72 = Sketch_7.setCoincident(SketchPoint_7.coordinates(), SketchCircle_11.center())
 662 SketchConstraintCoincidence_72.setName("SketchConstraintCoincidence_53")
 663 SketchConstraintRadius_14 = Sketch_7.setRadius(SketchCircle_11.results()[1], "r3")
 664 SketchConstraintRadius_14.setName("SketchConstraintRadius_12")
 665 model.do()
 666 ExtrusionCut_9 = model.addExtrusionCut(Part_1_doc, [model.selection("WIRE", "Sketch_7/Wire-SketchCircle_10_2f")], model.selection(), 0, "10*coeff", [model.selection("SOLID", "Extrusion_6_1")])
 667 ExtrusionCut_10 = model.addExtrusionCut(Part_1_doc, [model.selection("WIRE", "Sketch_1/Wire-SketchArc_7_2r-SketchArc_10_2f-SketchLine_44r-SketchArc_12_2r-SketchArc_13_2r-SketchLine_48r-SketchLine_43f-SketchArc_14_2f"), model.selection("FACE", "Sketch_1/Face-SketchCircle_11_2f"), model.selection("WIRE", "Sketch_1/Wire-SketchLine_50f-SketchArc_15_2f-SketchArc_16_2r-SketchLine_51r-SketchArc_17_2r-SketchLine_52f"), model.selection("FACE", "Sketch_1/Face-SketchLine_53f-SketchArc_18_2r-SketchLine_54f-SketchArc_19_2r-SketchArc_20_2f-SketchLine_55r-SketchArc_21_2f-SketchArc_22_2r"), model.selection("FACE", "Sketch_1/Face-SketchArc_8_2r-SketchArc_9_2f-SketchLine_42r-SketchLine_45f-SketchLine_46r-SketchArc_11_2r")], model.selection(), model.selection("FACE", "ExtrusionCut_3_2/Modfied_1"), 0, model.selection(), 0, [model.selection("SOLID", "ExtrusionCut_8_1_2")])
 668 Sketch_8 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_9_1/Modfied_1"))
 669 SketchLine_50 = Sketch_8.addLine(37, 14.80042035331162, 37, -14)
 670 SketchLine_50.setName("SketchLine_56")
 671 SketchLine_50.result().setName("SketchLine_56")
 672 SketchLine_50.setAuxiliary(True)
 673 SketchLine_51 = Sketch_8.addLine(model.selection("EDGE", "ExtrusionCut_9_1/Modfied_1&Extrusion_6_1/To_Face_1"))
 674 SketchLine_51.setName("SketchLine_57")
 675 SketchLine_51.result().setName("SketchLine_57")
 676 SketchConstraintCoincidence_73 = Sketch_8.setCoincident(SketchLine_50.startPoint(), SketchLine_51.result())
 677 SketchConstraintCoincidence_73.setName("SketchConstraintCoincidence_81")
 678 SketchConstraintCoincidence_74 = Sketch_8.setCoincident(SketchLine_50.endPoint(), SketchLine_51.result())
 679 SketchConstraintCoincidence_74.setName("SketchConstraintCoincidence_82")
 680 SketchLine_52 = Sketch_8.addLine(model.selection("EDGE", "Extrusion_6_1/Generated_Face_4&ExtrusionCut_9_1/Modfied_1"))
 681 SketchLine_52.setName("SketchLine_58")
 682 SketchLine_52.result().setName("SketchLine_58")
 683 SketchArc_21 = Sketch_8.addArc(34, -14, 37, -14, 34.00000001126211, -17, True)
 684 SketchArc_21.setName("SketchArc_23")
 685 SketchArc_21.result().setName("SketchArc_23")
 686 SketchArc_21.results()[1].setName("SketchArc_23_2")
 687 SketchConstraintCoincidence_75 = Sketch_8.setCoincident(SketchLine_50.endPoint(), SketchArc_21.startPoint())
 688 SketchConstraintCoincidence_75.setName("SketchConstraintCoincidence_83")
 689 SketchConstraintTangent_6 = Sketch_8.setTangent(SketchLine_50.result(), SketchArc_21.results()[1])
 690 SketchConstraintCoincidence_76 = Sketch_8.setCoincident(SketchLine_52.result(), SketchArc_21.endPoint())
 691 SketchConstraintCoincidence_76.setName("SketchConstraintCoincidence_84")
 692 SketchConstraintTangent_7 = Sketch_8.setTangent(SketchArc_21.results()[1], SketchLine_52.result())
 693 SketchLine_53 = Sketch_8.addLine(34.00000002238511, -17, 37, -17)
 694 SketchLine_53.setName("SketchLine_59")
 695 SketchLine_53.result().setName("SketchLine_59")
 696 SketchConstraintCoincidence_77 = Sketch_8.setCoincident(SketchArc_21.endPoint(), SketchLine_53.startPoint())
 697 SketchConstraintCoincidence_77.setName("SketchConstraintCoincidence_85")
 698 SketchConstraintCoincidence_78 = Sketch_8.setCoincident(SketchLine_51.startPoint(), SketchLine_53.endPoint())
 699 SketchConstraintCoincidence_78.setName("SketchConstraintCoincidence_86")
 700 SketchLine_54 = Sketch_8.addLine(37, -14, 37, -17)
 701 SketchLine_54.setName("SketchLine_60")
 702 SketchLine_54.result().setName("SketchLine_60")
 703 SketchConstraintCoincidence_79 = Sketch_8.setCoincident(SketchLine_50.endPoint(), SketchLine_54.startPoint())
 704 SketchConstraintCoincidence_79.setName("SketchConstraintCoincidence_87")
 705 SketchConstraintCoincidence_80 = Sketch_8.setCoincident(SketchLine_51.startPoint(), SketchLine_54.endPoint())
 706 SketchConstraintCoincidence_80.setName("SketchConstraintCoincidence_88")
 707 SketchConstraintRadius_15 = Sketch_8.setRadius(SketchArc_21.results()[1], "3*coeff")
 708 SketchConstraintRadius_15.setName("SketchConstraintRadius_16")
 709 SketchLine_55 = Sketch_8.addLine(model.selection("EDGE", "Sketch_7/Edge-SketchLine_38"))
 710 SketchLine_55.setName("SketchLine_61")
 711 SketchLine_55.result().setName("SketchLine_61")
 712 SketchConstraintMirror_2_objects = [SketchArc_21.results()[1], SketchLine_54.result(), SketchLine_53.result()]
 713 SketchConstraintMirror_2 = Sketch_8.addMirror(SketchLine_55.result(), SketchConstraintMirror_2_objects)
 714 [SketchArc_22, SketchLine_56, SketchLine_57] = SketchConstraintMirror_2.mirrored()
 715 SketchLine_57.setName("SketchLine_63")
 716 SketchLine_57.result().setName("SketchLine_63")
 717 SketchLine_56.setName("SketchLine_62")
 718 SketchLine_56.result().setName("SketchLine_62")
 719 SketchArc_22.setName("SketchArc_24")
 720 SketchArc_22.result().setName("SketchArc_24")
 721 SketchArc_22.results()[1].setName("SketchArc_24_2")
 722 model.do()
 723 ExtrusionCut_11 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_8/Face-SketchArc_23_2r-SketchLine_59f-SketchLine_60r"), model.selection("WIRE", "Sketch_8/Wire-SketchArc_24_2r-SketchLine_62f-SketchLine_63r")], model.selection(), 0, "100*coeff", [model.selection("SOLID", "ExtrusionCut_9_1")])
 724 Sketch_9 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_5_1/Generated_Face_1"))
 725 SketchLine_58 = Sketch_9.addLine(-32, -19, -32, -3.575047476349699)
 726 SketchLine_58.setName("SketchLine_64")
 727 SketchLine_58.result().setName("SketchLine_64")
 728 SketchLine_58.setAuxiliary(True)
 729 SketchLine_59 = Sketch_9.addLine(model.selection("EDGE", "Extrusion_5_1/Generated_Face_1&Extrusion_5_1/Generated_Face_2"))
 730 SketchLine_59.setName("SketchLine_65")
 731 SketchLine_59.result().setName("SketchLine_65")
 732 SketchConstraintCoincidence_81 = Sketch_9.setCoincident(SketchLine_58.startPoint(), SketchLine_59.result())
 733 SketchConstraintCoincidence_81.setName("SketchConstraintCoincidence_89")
 734 SketchConstraintCoincidence_82 = Sketch_9.setCoincident(SketchLine_58.endPoint(), SketchLine_59.result())
 735 SketchConstraintCoincidence_82.setName("SketchConstraintCoincidence_90")
 736 SketchLine_60 = Sketch_9.addLine(model.selection("EDGE", "Extrusion_5_1/Generated_Face_1&Extrusion_5_1/From_Face_1"))
 737 SketchLine_60.setName("SketchLine_66")
 738 SketchLine_60.result().setName("SketchLine_66")
 739 SketchArc_23 = Sketch_9.addArc(-29, -19, -32, -19, -29.00002201340376, -22, False)
 740 SketchArc_23.setName("SketchArc_25")
 741 SketchArc_23.result().setName("SketchArc_25")
 742 SketchArc_23.results()[1].setName("SketchArc_25_2")
 743 SketchConstraintCoincidence_83 = Sketch_9.setCoincident(SketchLine_58.startPoint(), SketchArc_23.startPoint())
 744 SketchConstraintCoincidence_83.setName("SketchConstraintCoincidence_91")
 745 SketchConstraintTangent_8 = Sketch_9.setTangent(SketchLine_58.result(), SketchArc_23.results()[1])
 746 SketchConstraintCoincidence_84 = Sketch_9.setCoincident(SketchLine_60.result(), SketchArc_23.endPoint())
 747 SketchConstraintCoincidence_84.setName("SketchConstraintCoincidence_92")
 748 SketchConstraintTangent_9 = Sketch_9.setTangent(SketchArc_23.results()[1], SketchLine_60.result())
 749 SketchLine_61 = Sketch_9.addLine(-32, -19, -32, -22)
 750 SketchLine_61.setName("SketchLine_67")
 751 SketchLine_61.result().setName("SketchLine_67")
 752 SketchConstraintCoincidence_85 = Sketch_9.setCoincident(SketchLine_58.startPoint(), SketchLine_61.startPoint())
 753 SketchConstraintCoincidence_85.setName("SketchConstraintCoincidence_93")
 754 SketchConstraintCoincidence_86 = Sketch_9.setCoincident(SketchLine_59.startPoint(), SketchLine_61.endPoint())
 755 SketchConstraintCoincidence_86.setName("SketchConstraintCoincidence_94")
 756 SketchLine_62 = Sketch_9.addLine(-32, -22, -29.00002201340376, -22)
 757 SketchLine_62.setName("SketchLine_68")
 758 SketchLine_62.result().setName("SketchLine_68")
 759 SketchConstraintCoincidence_87 = Sketch_9.setCoincident(SketchLine_59.startPoint(), SketchLine_62.startPoint())
 760 SketchConstraintCoincidence_87.setName("SketchConstraintCoincidence_95")
 761 SketchConstraintCoincidence_88 = Sketch_9.setCoincident(SketchArc_23.endPoint(), SketchLine_62.endPoint())
 762 SketchConstraintCoincidence_88.setName("SketchConstraintCoincidence_96")
 763 SketchConstraintRadius_16 = Sketch_9.setRadius(SketchArc_23.results()[1], "3*coeff")
 764 SketchConstraintRadius_16.setName("SketchConstraintRadius_17")
 765 model.do()
 766 ExtrusionCut_12 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_9/Face-SketchArc_25_2r-SketchLine_67f-SketchLine_68f")], model.selection(), 0, "100*coeff", [model.selection("SOLID", "Extrusion_5_1")])
 767 model.do()
 768
 769 from GeomAPI import  GeomAPI_Shape
 770
 771 model.testNbResults(Part_1, 1)
 772 model.testNbSubResults(Part_1, [0])
 773 model.testNbSubShapes(Part_1, GeomAPI_Shape.SOLID, [6])
 774 model.testNbSubShapes(Part_1, GeomAPI_Shape.FACE, [85])
 775 model.testNbSubShapes(Part_1, GeomAPI_Shape.EDGE, [444])
 776 model.testNbSubShapes(Part_1, GeomAPI_Shape.VERTEX, [888])
 777 model.testResultsVolumes(Part_1, [118190.673218984])
 778
 779 # checking for parametric update
 780 Parameter_Epaisseur.setValue(33.9)
 781 model.do()
 782 model.testResultsVolumes(Part_1, [118105.9369682])
 783 Parameter_Epaisseur.setValue(34)
 784 model.end()
 785
 786 assert(model.checkPythonDump())